jvc dvd video recorder dr

jvc dvd video recorder dr
JVC
DVD VIDEO RECORDER
DR-M100S
v RAM/RW
ID E0
I' SUPERVIDEO !
:i _';'NI, _
For
Customer
Use:
Enter
the
Serial
lear
INSTRUCTIONS
below
No. which
of cabinet.
iilfom]ation
Mode[
Serial
Model
No.
ale
located
Retain
this
fo[ future
No.
No.
LPT1013-OO1B
and
on the
ref_,rence.
2 EN
SAFETY FIRST
Dear Customer,
Thank you for purchasing the JVC DVD video recorder. Before
use, please read the safety information and precautions to
ensure safe use of your new unit.
Cautions
WARNING:
TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE
THIS UNIT TO RAIN OR MOISTURE.
CAUTION:
This unit should be used with AC 120V_, 60Hz only.
To prevent electric shocks and fire hazards, DO NOT use any
other power source.
CAUTION:
TO PREVENT ELECTRIC SHOCK, MATCH WIDE BLADE OF
PLUG TO WIDE SLOT, FULLY INSERT.
CAUTION:
TO REDUCE THE RISK OF ELECTRIC SHOCK.
DO NOT REMOVE COVER (OR BACK).
NO USER-SERVICEABLE PARTS INSIDE.
REFER SERVICING TO QUALIFIED SERVICE PERSONNEL.
The lightning flash with arrowhead symbol, within
an equilateral triangle, is intended to alert the user
to the presence of uninsulated "dangerous
voltage" within the product's enclosure that may
be of sufficient magnitude to constitute a risk of
electric shock to persons.
The exclamation point within an equilateral
triangle is intended to alert the user to the
presence of important operating and maintenance
(servicing) instructions in the literature
accompanying the appliance.
CAUTION:
A UNIT IS A CLASS 1 LASER PRODUCT. HOWEVER THIS
UNIT USES A VISIBLE LASER BEAM WHICH COULD CAUSE
HAZARDOUS RADIATION EXPOSURE IF DIRECTED. BE
SURE TO OPERATE THE UNIT CORRECTLY AS
INSTRUCTED.
WHEN THIS UNIT IS PLUGGED INTO THE WALL OUTLET,
DO NOT PLACE YOUR EYES CLOSE TO THE OPENING OF
THE DISC TRAY AND OTHER OPENINGS TO LOOK INTO
THE INSIDE OF THIS UNIT.
USE OF CONTROLS OR ADJUSTMENTS OR
PERFORMANCE OF PROCEDURES OTHER THAN THOSE
SPECIFIED HEREIN MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
DO NOT OPEN COVERS AND DO NOT REPAIR YOURSELR
REFER SERVICING TO QUALIFIED PERSONNEL.
CLASS 1 LASER PRODUCT
REPRODUCTION OF LABELS
WARNING LABEL INSIDE OF THE UNIT
CAU1 ION
A]TEN
VISISE
RAY_,f_E_,_EF_TS
I_VI_I_
_dAT_
A_
_SER
WFLN
OPEN_ID
_P_
_M
VISlB_ES
LOP9
DE
ION
_
ADVARSEL
_SER
SYN
INVISIBLES
VITERTOUTE
TO
DONOT
OR Vl W _R_(:" y
_
OPIlC)_
XP_ITION
ADVARSEL
IG OG
USY_LIG
L'OUVE_TURE
AU
SY_LIG
OG
W_SER
TR)_
_BE[tST_
ING
NAR
VEDAE_I_
U_A
UN_/_
UD_TTEL£
O_
DEKSEL
EKSpC_%ERI_
VARO!
SYN
ING
IG
VARNING
AVA_A£S£A
OLET
_pNES
9Y_LIG
AL_IINA
N/*KYVAL£E
NAKYM_0MND
FOR
_S
NAR
_
R_TEIL_LLE
FAISCEAU N_ PASFI×En
8THOLING S_ I_,,E
STR_L_N STIRR
AW_T UOT_
OU_ t_EGAR R
r)l_ C_T M Nr VIA0
n ] _f_I_KE M r)
OpflSKE
I _RS
_I_E_I
M b OPflSKF
K_'SO _IT_
OPflS_N Alll
S
_
O_Y_LIG
_9ER_TRALNINQ
JA
Opp
_R
DENNA
DEL
_
ADST_LEI_
FARLIG
STI_RA
_ I_1S _J_LE_
E_
SI_AI EN M _
Op ISKAINS1RUM_ q_
All'ENTION:
POUR EVlTER LES CHOCS ELECTRIQUES, INTRODUIRE LA
LAME LA PLUS LARGE DE LA FICHE DANS LA BORNE
CORRESPONDANTE
DE LA PRISE ET POUSSER JUSQU'AU
FOND.
Note to CATV system installer:
This reminder is provided to call the CATV system installer's
attention to Article 820-40 of the NEC that provides guidelines
for proper grounding and, in particular, specifies that the cable
ground shall be connected to the grounding system of the
building, as close to the point of cable entry as practical.
CAUTION:
Changes or modifications net approved by JVC could void user's
authority to operate the equipment.
SAFETY FIRST
IMPORTANT
PRODUCT
SAFETY
INSTRUCTIONS
Electrical energy can perform many useful functions. But improper
use can result in potential electrical shock or fire hazards. This
product has been engineered and manufactured to assure your
personal safety. In order not to defeat the built-in safeguards,
observe the following basic rules for its installation, use and
servicing.
ATTENTION:
Follow and obey all warnings and instructions marked on your
product and its operating instructions. For your safety, please read
all the safety and operating instructions before you operate this
product and keep this booklet for future reference.
INSTALLATION
1. Grounding or Polarization
(A)Your product may be equipped with a polarized alternatingcurrent line plug (a plug having one blade wider than the other).
This plug will fit into the power outlet only one way. This is a
safety feature.
If you are unable to insert the plug fully into the outlet, try
reversing the plug. If the plug should still fail to fit, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the polarized plug.
(B)Your product may be equipped with a 3-wire grounding-type
plug, a plug having a third (grounding) pin. This plug will only fit
into a grounding-type power outlet. This is a safety feature.
If you are unable to insert the plug into the outlet, contact your
electrician to replace your obsolete outlet. Do not defeat the
safety purpose of the grounding-type plug.
2. Power Sources
Operate your product only from the type of power source
indicated on the marking label. If you are not sure of the type of
power supply to your home, consult your product dealer or local
power company. If your product is intended to operate from
battery power, or other sources, refer to the operating
instructions.
3. Overloading
Do not overload wall outlets, extension cords, or integral
convenience receptacles as this can result in a risk of fire or
electric shock.
4. Power Cord Protection
Power supply cords should be routed so that they are not likely
to be walked on or pinched by items placed upon or against
them, paying particular attention to cords at plugs, convenience
receptacles, and the point where they exit from the product.
5. Ventilation
Slots and openings in the cabinet are provided for ventilation.
To ensure reliable operation of the product and to protect it from
overheating, these openings must not be blocked or covered.
• Do not block the openings by placing the product on a bed,
sofa, rug or other similar surface.
• Do not place the product in a built-in installation such as a
bookcase or rack unless proper ventilation is provided or the
manufacturer's instructions have been adhered to.
6. Wall or Ceiling Mounting
The product should be mounted to a wall or ceiling only as
recommended by the manufacturer.
EN
3
ANTENNA
INSTALLATION
INSTRUCTIONS
1. Outdoor Antenna Grounding
If an outside antenna or cable system is connected to the
product, be sure the antenna or cable system is grounded so as
to provide some protection against voltage surges and built-up
static charges. Article 810 of the National Electrical Code,
ANSI/NFPA 70, provides information with regard to proper
grounding of the mast and supporting structure, grounding of
the lead-in wire to an antenna discharge unit, size of grounding
connectors, location of antenna discharge unit, connection to
grounding electrodes, and requirements for the grounding
electrode.
2. Lightning
For added protection for this product during a lightning storm, or
when it is left unattended and unused for long periods of time,
unplug it from the wall outlet and disconnect the antenna or
cable system. This will prevent damage to the product due to
lightning and power-line surges.
3. Power Lines
An outside antenna system should not be located in the vicinity
of overhead power lines or other electric light or power circuits,
or where it can fall into such power lines or circuits. When
installing an outside antenna system, extreme care should be
taken to keep from touching such power lines or circuits as
contact with them might be fatal.
EXAMPLE
NATIONAL
OF ANTENNA
ELECTRICAL
GROUNDING AS PER
CODE, ANSI/NFPA 70
LEADIN WIRE
GROUND CLAMP
.ANTENNA
DISCHARGE UNIT
(NEC SECTION
810-20)
ELECTRICSERVICE
iROUNDING
CONDUCTORS
(NEC SECTION 810-21)
GROUND CLAMPS
POWER SERVICE GROUNDING ELECTRODESYSTEM
(NEC ART 250. PART H)
NEC - NATIONAL
ELECTRICAL
CODE
4 EN
SAFETY FIRST
USE
1. Accessories
To avoid personal injury:
• Do not place this product on an unstable cart, stand, tripod,
bracket, or table. It may fall, causing serious injury to a child or
adult, and serious damage to the product.
• Use only with a cart, stand, tripod, bracket, or table
recommended by the manufacturer or sold with the product.
• Use a mounting accessory recommended by the
manufacturer and follow the manufacturer's instructions for
any mounting of the product.
• Do not try to roll a cart with small casters across thresholds or
deep-pile carpets.
2. Product and Cart Combination
PORTABLE
CART WARNING
A product and cart combination should
(Symbol
provided
byRSTAC)
be moved with care. Quick stops,
excessive force, and uneven surfaces
may cause the product and cart
combination to overturn.
3. Water and Moisture
Do not use this product near
water--for example, near a bath tub,
wash bowl, kitchen sink or laundry tub,
in a wet basement, or near a swimming pool and the like.
4. Object and Liquid Entry
Never push objects of any kind into this product through
openings as they may touch dangerous voltage points or shortout parts that could result in a fire or electric shock. Never spill
liquid of any kind on the product.
5. Attachments
Do not use attachments not recommended by the manufacturer
of this product as they may cause hazards.
6. Cleaning
Unplug this product from the wall outlet before cleaning. Do not
use liquid cleaners or aerosol cleaners. Use a damp cloth for
cleaning.
7. Heat
The product should be situated away from heat sources such
as radiators, heat registers, stoves, or other products (including
amplifiers) that produce heat.
SERVICING
1. Servicing
If your product is not operating correctly or exhibits a marked
change in performance and you are unable to restore normal
operation by following the detailed procedure in its operating
instructions, do not attempt to service it yourself as opening or
removing covers may expose you to dangerous voltage or other
hazards. Refer all servicing to qualified service personnel.
2. Damage Requiring Service
Unplug this product from the wall outlet and refer servicing to
qualified service personnel under the following conditions:
a. When the power supply cord or plug is damaged.
b. If liquid has been spilled, or objects have fallen into the
product.
c. If the product has been exposed to rain or water.
d. If the product does not operate normally by following the
operating instructions. Adjust only those controls that are
covered by the operating instructions as an improper
adjustment of other controls may result in damage and will
often require extensive work by a qualified technician to
restore the product to its normal operation.
e. If the product has been dropped or damaged in any way.
f. When the product exhibits a distinct change in
performance--this
indicates a need for service.
3. Replacement
Parts
When replacement parts are required, be sure the service
technician has used replacement parts specified by the
manufacturer or which have the same characteristics as the
original part. Unauthorized substitutions may result in fire,
electric shock or other hazards.
4. Safety Check
Upon completion of any service or repairs to this product, ask
the service technician to perform safety checks to determine
that the product is in safe operating condition.
HOW
TO USE THIS INSTRUCTION
MANUAL
• All major sections and subsections are listed in the Table Of
Contents on page 6. Use this when searching for information on
a specific procedure or feature.
• The Index on pages 12 - 14 illustrates the controls and
connections on the front and rear panel, the front display panel
and the remote control.
• The list of terms on page 70 lists frequently-used terms, and the
number of the page on which they are used or explained in the
manual.
• The _ mark signals a reference to another page for instructions
or related information.
• Operation buttons necessary for the various procedures are
clearly indicated through the use of illustrations at the beginning
of each major section.
BEFORE YOU INSTALL YOUR
NEW UNIT...
•.. please read the sections/literature
listed below•
• "SAFETY FIRST" (_-_pg. 2)
• "IMPORTANT PRODUCT SAFETY INSTRUCTIONS" (_ pg. 3
- 5)
SAFETY FIRST
Declaration of Conformity
Model Number:DR-MlOOSU
Trade Name:JVC
Responsible Party:JVC Americas Corp.
Address:1700 Valley Road Wayne, N.J. 07470
Telephone Number:973-317-5000
This device complies with Part 15 of FCC Rules.
Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and (2) this
device must accept any interference received, including
interference that may cause undesired operation.
This equipment has been tested and found to comply with the
limits for a Class B digital device, pursuant to Part 15 of the FCC
Rules. These limits are designed to provide reasonable
>rotection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate
radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful
interference to radio communications. However, there is no
guarantee that interference will not occur in a particular
installation. If this equipment does cause harmful interference to
radio or television reception, which can be determined by turning
the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected.
Consult the dealer or an experienced radio/TV technician for
help.
When the equipment is installed in a cabinet or a shelf, make sure
that it has sufficient space on all sides to allow for ventilation
(10 cm or more on both sides, on top and at the rear).
When discarding batteries, environmental problems must be
considered and the local rules or laws governing the disposal of
these batteries must be followed strictly.
Failure to heed the following precautions may result in
damage to the unit, remote control or disc.
1. DO NOT place the unit --ill all environment prone to extreme temperatures
or
humidity.
-- in direct sunlight.
-- in a dusty environment.
-- in an environment where strong magnetic fields are
generated.
-- on a surface that is unstable or subject to vibration.
2. DO NOT block the unit's ventilation
openings or holes.
(If the ventilation openings or holes are blocked by a
newspaper or cloth, etc., the heat may not be able to get out.)
3. DO NOT place heavy objects on the unit or remote control.
4. DO NOT place anything which might spill on top of the unit
or remote control.
(if water or liquid is allowed to enter this equipment, fire or
electric shock may be caused.)
5. DO NOT expose the apparatus
7. DO NOT place any naked flame sources,
candles, on the apparatus.
MOISTURE
• Manufactured under licence from Dolby Laboratories. "Dolby"
and double-D symbol are trademarks of Dolby Laboratories.
• "DTS" and "DTS DIGITAL OUT" are trademarks of Digital
Theater Systems, Inc.
• VCR Plus+ and PlusCode are registered trademarks of Gemstar
Development Corporation.
The VCR Plus+ system is manufactured under license from
Gemstar Development Corporation.
• DSS" is an official trademark of DIRECTV, Inc., a unit of GM
Hughes Electronics. DISH Network" is a trademark of Echostar
Communications Corporation.
• This product incorporates copyright protection technology that is
protected by method claims of certain U.S. patents and other
intellectual property rights owned by Macrovisien Corporation
and other rights owners. Use of this copyright protection
technology must be authorized by Macrovision Corporation, and
is intended for home and other limited viewing users only unless
otherwise authorized by Macrovision Corporation. Reverse
engineering or disassembly is prohibited.
to dripping
or splashing.
6. DO NOT use this equipment in a bathroom or places with
water. Also DO NOT place any containers filled with water or
liquids (such as cosmetics or medicines, flower vases, potted
plants, cups, etc.) on top of this unit.
8. AVOID violent
DIGITAL
EN 5
shocks
to the unit during
such as lighted
transport.
CONDENSATION
Moisture in the air will condense on the unit when you move it from
a cold place to a warm place, or under extremely humid
conditions--just
as water droplets form on the surface of a glass
filled with cold liquid. In conditions where condensation may occur,
disconnect the unit's power plug from the wall and keep it
disconnected for a few hours to let the moisture dry, then turn on
the unit.
DISCLAIMER
OF LIABILITY.
JVC shall not be liable for any loss relating to the unit's failure to
properly record, store or playback any content (video, audio or
otherwise) for any reason whatsoever. Any applicable warranties
shall only cover replacement or repair of the effected unit, and
shall not apply to recovery or replacement of lost content.
ATTENTION:
•
Using a mobile phone in the vicinity of the unit may cause
picture vibration on the TV screen or change the screen to a
blue back display.
•
Some TVs or other appliances generate strong magnetic
fields. Do not place such appliances on top of the unit as it
may cause picture disturbance.
•
If there is a power outage when using the unit, the recorded
data may be erased.
•
Recorded programmes and data cannot be restored once
the disc is damaged.
6
EN
CONTENTS
SAFETY
FIRST
2
EDITING
53
7
About Discs ....................................................................................7
DV Dubbing .................................................................................
Edit From A Camcorder ...............................................................
Edit To Or From Another Recorder .............................................
53
54
55
INDEX
12
Digital Audio Dubbing ..................................................................
56
INSTALLINGYOUR NEW UNIT
16
Basic Connection
16
DISCINFORMATION
.........................................................................
INITIAL SETTINGS
17
Plug & Play Set ............................................................................
Language .....................................................................................
Clock Set ......................................................................................
17
18
19
Tuner Set .....................................................................................
Monitor Set ...................................................................................
20
21
BASICOPERATIONSON DVD DECK
22
Basic Playback .............................................................................
Playback Features .......................................................................
Live Memory Playback .................................................................
22
23
27
Using The On-screen Bar ............................................................
Basic Recording ...........................................................................
Recording Features ......................................................................
30
34
35
TIMER RECORDING
37
VCR Plus+ Timer Programming ...................................................
Manual Timer Programming .........................................................
On-Disc Timer Programming .......................................................
Check, Cancel And Change Programs ........................................
Automatic Satellite Program Recording .......................................
37
38
39
41
42
NAVIGATION
43
Library Database Navigation ........................................................
43
Basic Operation Of Original Information ......................................
Edit Original Information ...............................................................
Basic Operation Of Play List Information .....................................
Edit Play List Information .............................................................
44
46
47
48
Edit Library Information ................................................................
Playback With MP3/JPEG Navigation ..........................................
51
52
REMOTECONTROL/SYSTEMCONNECTIONS
57
Remote Control Functions ...........................................................
57
Connecting To A Dolby Digital Decoder Or All Amplifier
With Built-in DTS .......................................................................
57
SUBSIDIARYSETTINGS
58
Mode Set .....................................................................................
Scan Mode Set ............................................................................
58
60
Tray Lock .....................................................................................
Child Lock ....................................................................................
61
61
Changing VCR Plus+ Setting ......................................................
Format A Disc ..............................................................................
Finalize A Disc .............................................................................
62
63
64
TROUBLESHOOTING
65
APPENDIX
68
SPECIFICATIONS
69
LIST
OFTERMS
70
WARRANTY
(OnlyinU.S.A.)
71
FORSERVICING
(OnlyinU.S.A.)
72
DISC INFORMATION
DVD-R/RW
| AboutDiscs
You can use discs with the following Iogos for recording and
playback.
DVD
Q
RW
DVD-RAM
12 cm: 4.7 GB/9.4 GB
8 cm: 1.4 GB/2.8 GB
Vet. 2.0/2x speed
Vet. 2.1/lx - 3x speed
Ver. 2.2/5x speed
DVD-R
12 cm: 4.7 GB
8 cm: 1.4 GB
Vet. 2.0/lx - 4x/8x speed
(Video mode)
Vet. 2.1/16x speed
(Video mode)
• The above table is based on the information as of January 2005.
• Recording and playback may not be performed depending on the
characteristics and condition of the disc used, leading to
unsatisfactory results. Using discs manufactured by JVC is
recommended since they have been tested to be compatible with
this unit.
Discs
It is only possible to use discs which conform with DVD-RAM
standard Version 2.0, 2.1 or 2.2.
• If you use a disc formatted under a different standard version,
format it on this unit before use.
• It may not be possible to record, play back, edit or dub a
DVD-RAM disc even if it conforms to the standard if it was
recorded or edited on the devices from other manufacturers
•
•
•
•
Discs
Before finalizing --- it is possible to record oil unrecorded areas of the disc, edit the
disc title and program titles, and delete programs.
• It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalized.
• It is impossible to overwrite recorded areas of DVD-R discs.
• Available recording capacity does not increase even if a recorded
program is deleted from a DVD-R disc.
DVD-RW
12 cm: 4.7 GB
8 cm: 1.4 GB
Ver. 1.1/lx - 2x speed
(Video mode/VR mode)
Ver. 1.2/4x/6x speed
Video mode/VR mode)
R
R4.7
DVD-RAM
7
It is only possible to use DVD-R discs which conform with DVD-R
standard Version 2.0 or 2.1.
It is only possible to use discs which conform with DVD-RW
standard Version 1.1 or 1.2. Available in VR mode and Video
mode.
When a DVD-R/RW disc (Video mode) is finalized (_ pg. 64), it
can be played back on a standard DVD player as a DVD VIDEO
disc.
When a DVD-RW disc (VR mode) is finalized (_*_pg. 64), it can be
played back on DVD player compatible with the VR mode of
DVD-RW discs.
Recordable/PlayableDiscs
RA_
RAM4_7
EN
or on
a PC, or if it has far too many titles, or if there is very little
available capacity remaining on the disc.
DVD-RAM discs recorded on this unit cannot be played back on
an incompatible DVD player.
It is possible to record copy-once programs of digital broadcasts
only onto 4.7/9.4 GB DVD-RAM discs. (2.8 GB DVD-RAM discs
are not compatible)
This unit does not support discs contained in cartridges. Use the
disc after removing it from the cartridge. For details on discs in
TYPE2 and TYPE4 (disc removable) cartridge, refer to its
instruction manual.
While recording, it is possible not only to start playback of a
program currently being recorded, but also to watch another
program previously recorded.
After finalizing -After a DVD-R/RW disc (Video mode) has been finalized, it is
possible to play back the recorded programs (video and!or audio)
on a standard DVD video player as a DVD VIDEO disc.
• Edited titles are displayed
as the "DVD menu" in
video mode.
• It is impossible to record,
edit or delete the data
either in video mode or in
VR mode.
• Either in video mode or in
VR mode, although the
disc can be played back
on DVD players from other
manufacturers, sometimes it may not be possible to play back
depending on the disc and recording conditions.
• It is impossible to record on CD-R/RW or DVD-R discs used for
authoring.
• When recording copy-once programs of digital broadcasts,
record in VR mode using CPRM compatible DVD-RW discs.
NOTE:
The following may result if you play back a DVD-R disc recorded
on another unit.
• The disc does not play.
• A mosaic pattern (block noise) appears on the screen.
• Video or audio may be dropped out.
• The unit stops during playback.
8
EN
DXSC XNFORFIA770N
DiscsForPlayback Only
UnplayableDiscs
You can use discs with the following loges for playback only.
The unit may not be able to play back or it may take some time to
read a disc depending on the recording status or condition of the
disc, or if the disc is scratched, dirty or warped.
In addition, do not attempt to play back discs in unusual shapes
(heart-shaped, octagonal, or other forms). If such discs are
accidentally played back, it may cause noise that can lead to
speaker damage.
• CD-ROM discs (including PHOTO-CD and CD-G)
• Discs recorded in Packet Write (UDF) format
• 1.3 GB double density CDs (DDCD)
• High density CDs (HDCD)
Video CD/Super Video CD
d]
DVD VIDEO
VIDEO
(example of region code
indications)
[DIGITAL
VIDEO I
1 SUPER VIDEOI
@[email protected]
@@
CD-DA fifes
DIGITAL
_
CD-DA/JPEG/
CD-R
MP3 files
Recordable]
AUDIO
co°w
CD-DA/JPEG/
MP3 files
ReWritable
_OE_
i_
_oc(:__
JPEG/MP3
CD-ROM
files
I
Playback may not be performed depending on the characteristics
and condition of the disc used.
• DTS Audio CDs can also be played back. (An optional DTS
decoder is required)
• MP3 and JPEG discs can be played back on this unit only when
they have been recorded in the ISO9660 or Joliet format and
finalized.
• JPEG files that can be played back on this unit must conform to
JFIF/Baseline process, and the maximum resolution of a JPEG
file is 2,812 pixels in width and 2,112 pixels in height.
• CD-R/RW discs recorded in music CD format need to be finalized
to play back on this unit.
• Operation and audio quality of this unit are not guaranteed for
discs that do not conform to the Compact Disc specification
(CD-DA).
Before you play back a CD, check for the CD logo and read the
notes on the package to confirm that it conforms to the Compact
Disc specification.
• Depending on the intentions of the author of the software,
recording conditions of DVD discs and Video CD/SVCD discs
may be restricted. Since this unit plays back discs according to
the intentions of the author of the software as indicated on the
disc, some functions may not operate as commanded.
• When switching from the first layer to the second layer of doublelayered DVD VIDEO discs, the image and sound may be
momentarily distorted. This is not a malfunction.
• DVD-AUDIO discs compatible with DVD video players can be
played.
• Super Audio CDs (SACD) compatible with conventional CD
players can be played.
The following discs also cannot be played back.
• Discs of a region number other than "1"
• DVD-RAM (2.6 GB/6.2 GB)
• DVD-RAM (TYPE1)
Caution for DualDisc playback
The Non-DVD side of a "DualDisc" does not comply with the
"Compact Disc Digital Audio" standard. Therefore, the use of NonDVD side of a DualDisc on this product may not be recommended.
RegionNumber
The world is divided into 6 regions for DVD VIDEO discs.
DVD VIDEO discs are assigned a region number to indicate which
region they may be played back in. A disc cannot be played back
on this unit unless the region number of the disc matches that of
the unit. The region number for this unit is "1". Only discs whose
region number includes "1" or "ALL" can be played back such as
shown below.
Examples of DVD VIDEO labels which can be played back
using this unit.
Marks
of discs in this instruction
manual
Allows operation with a
DVD-RAM disc.
Allows operation with a
Video CD/Super Video
CD (SVCD) disc.
Allows operation with a
DVD-R disc.
Allows operation with
an Audio CD disc.
Allows operation with a
DVD-RW disc.
Allows operation with a
disc including MP3
Iiles.
Allows operation with a
DVD VIDEO disc.
Allows operation with a
disc including JPEG
Iiles.
DISC INFORMATION
EN
9
Audio CD/Video CD/SVCD
Typically, Audio CD discs are divided into separate tracks each
containing one song. Each track is assigned a number. For
example, the third track is Track 3. The same is true for Video CD/
SVCD discs.
However, some discs are not divided into tracks.
RecordingMediumAndFormat
DVD-RAM
• Recording and erasing can be performed as many times as
possible on a disc.
• Editing can be performed after recording, such as deleting
unwanted parts.
• While recording, it is possible net only to start playback of a
program currently being recorded, but also to watch another
program previously recorded.
i
Audio
Track 2
CD/Video
4. _ CD/SVCD
Track 3
_
/
JPEG/MP3 Disc (CD-R/RW/ROM)
MP3/JPEG files put in directories nested in several
will be organized as if they were put in single level
(groups) by the MP3/JPEG Navigation of this unit.
DVD-RW (VR mode)
• Recording and erasing can be performed as many times as
possible on a disc.
• Editing can be performed after recording, such as deleting
unwanted parts.
DVD-RW (Video mode)
• Can be played back on other DVD players after finalizing.
• New recording can be performed by erasing all the data on a disc
once played back.
DVD-R
• Can be played back on other DVD players after finalizing.
• Suitable when keeping a recorded disc for a long time.
Track 1
File structure
Navigation
_-,_
of a disc before starting
-4
Track 4
levels on a disc
directories
(_ pg. 52)
the MP3/JPEG
r Roo
FileStructureOf Discs
DVD VIDEO
Typically, DVD VIDEO discs are made up of larger units called
"titles". Each title has a number (title number) that can be used to
select desired titles. Titles are further divided into units called
"chapters". Each chapter has a number (chapter number) that can
also be used to select desired chapters. Note that some discs are
not divided into titles and chapters.
When you record
disc
a program on a DVD-RAM/RW
(VR mode)
A single recording session results in a single title. In addition,
chapter marks are automatically inserted when recording is
paused, or audio changes from monaural to stereo due to
commercial breaks, etc. It is also possible to insert chapter marks
at desired locations during playback. (_:_pg. 25)
When you record a program on a DVD-R/RW (Video mode)
disc
A single recording session results in a single title. Marks are
assigned automatically approximately every 5 minutes during
recording. In addition, chapter marks are automatically inserted
when recording is paused, or audio changes from monaural to
stereo due to commercial breaks, etc. It is possible to insert
chapter marks at desired locations during playback. Once the disc
has been finalized, these chapter marks are deleted and new
chapter marks are assigned automatically approximately every
5 minutes.
_
DVD-RA
Tit,e
1
DVD-RW,DVD-R
4F
DVDVIDEO disc
Tit,e2
. ,
,-
• In Video mode, even before finalizing, it is impossible to perform
editing operations
other than changing the disc name and!or title
names and deleting programs and/or titles.
• After finalizing, it is impossible to perform editing operations.
MP3 file
Directory
JPEG
file
File structure of the disc after starting the MP3/JPEG
Navigation
Files are automatically grouped as follows and displayed on the
MP3/JPEG Navigation screen. Data is displayed in the
alphabetical order of file name. Files are grouped based on roots.
Root
Europe
POPS
ROCK
France
• This unit can recognize up to 9 hierarchies including directories
and files.
Also, it can recognize up to 250 files in each group, and up to
99 groups on a disc.
NOTES:
• Video CD/SVCD discs that support Playback Control (PRO)
The contents of a disc are recorded into several hierarchies, and
played back according to the instructions on the screen while
navigating through the hierarchies. It is also possible to playback
recorded tracks consecutively without activating the PBC function
even when playing a PBC-compatible disc. (_ pg. 26)
• Regarding the contents recorded on discs
Some files may not be played back depending on the file types
and other factors.
10 EN DISC
INFORMAIION
DVDVIDEOMarks
PlacingA Disc
Sometimes marks are printed on a DVD disc and/or on its
packaging to indicate information regarding the contents and
functions of the disc. Check the marks indicating the contents and
functions of the disc. Note, however, that in some cases a disc
may not include a mark even for a function it supports.
Opening
Marks
related
_
Recorded under the
standard 4:3 aspect
ratio
top and the bottom
of image which has
a standard 4:3
1ray.
A
A
Discs without
cartridges
to audio
Nu mber of audio tracks
D[_
I G
disc
• Pressing the button again closes the disc tray.
• Use the button to open and close the disc tray.
• Do not block the disc tray with your hand while it is opening or
closing as this may result in hardware failure.
• Do not place unplayable discs or any object other than a disc on
the disc tray.
• Do not press down strongly on the disc tray or place any heavy
objects on it.
Video playback is in Wide video mode (16:9)
on wide televisions, but pan and scan is used
on televisions with standard 4:3 aspect ratio
(either the left or right side of the image is cutout).
D
the
Screen includes
black bands at the
Video playback is in Wide video mode (16:9)
on wide televisions, but in letter box on
televisions with standard 4:3 aspect ratio.
Q))
the disc tray
to open
Number of angles
aspect ratio (letter
box)
related
_
to video
Number of subtitles
Marks
Press
I T
A
L
Dolby Digital mark
It has been developed by Dolby Laboratories
a digital surround
system.
D i (; i • A L
DTS (Digital Theater Systems)
SURROt;NE)
You
can enjoy
audio
if you
connect
an
amplifier
with aDTS
built-in
DTS
decoder
to the
DIGITAL OUT connector of the unit.
as
Label side facing
up
Disc tray
Place the disc on the disc tray with the label side facing up. Since
disc size changes depending on the disc to be played back, be
sure to correctly align the disc with the grooves for its size. If the
disc is not in its groove, it may be scratched or otherwise
damaged. To insert an 8 cm disc, place it according to the inner
groove.
DVD-RAM
discs contained
Double-sided discs:
in cartridges
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the side
you wish to play back or record facing down. If you insert the disc
with "Side A" facing down, programs are recorded on side A.
Single-sided discs:
Remove the disc from the cartridge. Align the disc with the grooves
on the disc tray as shown in the illustration and insert with the label
side facing up.
DISC INFORMATION
CareAndHandlingOf Discs
How
to handle
discs
When handling a disc, do not
touch the surface of the disc.
Since discs are made of
plastic, they are easily
damaged. If a disc gets dirty,
dusty, scratched or warped, the
images and sound will not be
picked up correctly, and such a
disc may cause the unit to malfunction.
Label side
Do not damage the label side, stick paper to or use any adhesives
on its surface.
Recording side
Make sure that discs are not scratched and dirty on the recording
side before use. Scratches and dirt on the recording side of a disc
may hinder proper playback and recording. Also be careful that a
DVD-RAM disc may get scratched or dirty when removed from
cartridge then put back in after use.
Storage
Make sure that discs are kept in their cases. If discs are piled on
top of one another without their protective cases, they can be
damaged. Do not put discs in a location where they may be
exposed to direct sunlight, or in a place where the humidity or
temperature is high. Avoid leaving discs in your car!
Maintenance
of discs
If there are fingerprints or other dirt adhering
to a disc, wipe with a soft dry cloth, moving
from the centre outwards.
If a disc is difficult to clean, wipe with a cloth
moistened with water. Never use record
cleaners, petrol, alcohol or any anti-static
agents.
CAUTION:
Sometimes during playback, noise may appear or images may
be garbled. This is sometimes due to the disc. (It may not be up
to industry standards.)
These symptoms are caused by the discs, not by the
malfunction of the unit.
EN 11
12 ENINDEX
FrontView
O
O
_)
O
O
O
O
Standby/On Button (STANDBY/ON
Infrared Beam Receiving Window
Disc tray
Eject Button (__)
Record Button (0)
Stop Button (11)
Play Button (1_)
©/I)
_) Front Display Panel
_) B-video Input Connector [S-VIDEO]
_) Video/Audio Input Connectors [VIDEO/AUDIO
_) DV Input connector [DV IN (_,*)]
* _,(i.Link) refers to the IEEE1394-1995 industry specification and
extensionsthereof. The _,logo is used for products compliant with the
i.Link standard.
(_ Channel Buttons (CH +/-)
To access covered connectors,
press PUSH-OPEN to open the
cover.
Rear View
()
_)
O
O
O
O
•
•
•
Antenna Input Connector [ANTENNA IN]
Component Video Output Connectors [COMPONENT
VIDEO OUT (Y/PB/PR)]
Video Output Connector [VIDEO OUTPUT]
S-video Output Connector [S-VIDEO OUTPUT]
Video Input Connector [VIDEO INPUT L-l]
S-video Input Connector [S-VIDEO INPUT L-l]
Digital Audio Output Connector [DIGITAL OUT (COAXIAL)]
Cooling Fan
This prevents the temperature from rising inside the unit. Do not
remove it.
Install the unit so as not to block the area around the fan.
The unit may become hot when it is turned off, as the cooling
fan on the rear of the unit is not activated. However, the cooling
fan may be activated in the following cases;
-- In the Automatic Satellite Program Recording standby mode
(=:_',
pg. 42).
-- When "AUTO CLOCK" is set to "ON" (_ pg. 19).
(Set "AUTO CLOCK" to "OFF" if you mind the noise of the
fan.)
(L(MONO)/
R)]
_)
_)
_)
(_
(_
Region Number
AC Power Cord
Antenna Output Connector [ANTENNA OUT]
Audio Output Connector [AUDIO OUTPUT]
Audio Input Connector [AUDIO INPUT L-l]
INDEX
EN13
FrontDisplayPanel
O Disc Type Indicator
When a disc is loaded, the type of the disc is indicated.
Disc Status Indicator
When a disc is running, the disc marks rotate.
During High-Speed Search:
Rotate faster than normal playback.
During Slow Motion:
Rotate slower than normal playback.
While recording:
Inner red ring lights in the same way as normal playback.
During Instant Timer Recording (ITR), inner red ring slowly
blinks.
While paused:
Disc marks blink when either recording or playing back.
While stopped:
Disc marks all light.
While resume stopped:
Disc marks all blink.
While the disc tray opened: Disc marks all light out.
No disc on the disc tray:
Disc marks all light out.
VR Mode Indicator (VR) _ pg. 63
Lights when a DVD-RW disc is formatted in VR mode.
O Linear PCM Indicator (LPCM)
Lights when "XP MODE REC AUDIO" is set to "LINEAR PCM"
(_ pg. 59) for recording with DVD-RAM, DVD-R and DVD-RW
discs, and when Linear PCM audio is played.
O Recording Mode Indicator (XP/SP/LP/EP/FR)
_ pg. 34
Blinks when recording mode is being set.
While "FR" is blinking, the left 3 digits of the Multi Display (_
_) indicate setting values ranging from "60" to "480". After the
value has been set, only "FR" lights.
O Group/Title Indicator (GRP/TITLE)
"GRP" or 'q'ITLE" lights depending on a disc loaded while the
left 2 digits of the Multi Display (_;P) indicate the numbers
explained below.
"GRP":
Total number of groups or group number being played
back are displayed on the Multi Display.
'q'ITLE": Total number of titles or title number being played
back are displayed on the Multi Display.
O Channel Indicator
Indicates the channel received.
O Track/Chapter
Indicator (TRK/OHAP)
'q-RK" or "CHAP" lights depending on a disc loaded while the
3rd and 4th digits from the left of the Multi Display (_) indicate
the numbers explained below.
'%RK":
Total number of tracks or track number being played
back are displayed on the Multi Display.
"CHAP": Chapter number being played back are displayed on
the Multi Display.
Random/Program Playback Mode Indicator (RND/PRGM)
_', pg. 33
"RND":
Lights when Random Playback mode is set.
"PROG': Lights when Program Playback mode is set.
Repeat Mode Indicator (C_,,._I/A-B) _'_ pg. 30, 31
Select Repeat Playback mode on the on-screen bar.
"C_,,,_":
Whole disc is played back repeatedly.
"C_,,,_1":
A single title/chapter/track
is played back
repeatedly.
"C_,,,_A-B": The selected part (A-B) is played back repeatedly.
No display: Repeat Playback mode is off.
_) DISC Timer Indicator_
pg. 39
_DISC:
J(_:
=_Q:
, ,,
_(_,-:
Lights when a disc set up for On-Disc Timer
Programming is loaded.
Lights when timer recording other than On-Disc
Timer Programming is on stand-by or being
executed.
Lights when On-Disc Timer Programming is on
stand-by or being executed.
Blinks quickly if you press TIMER(]) in the
following cases;
• Disc is not loaded.
• Clock has not been set.
• There is no program setting.
_) Video Output Indicator ([]) _ pg. 60
No display: Indicates that interlace mode is engaged.
[]:
Indicates that progressive mode is engaged.
(Example)
[] lights when video output mode is in progressive
mode.
(]i) Automatic Satellite Program Recording Indicator _ pg. 42
Lights when the unit is in the Auto Satellite Program Recording
standby mode.
(_ Group/Title Number Display
1]) Track/Chapter Number Display
(_ Remaining Time/Elapsed Time Display _ pg. 25, 35
Lights when remaining time of DVD-RAM, DVD-R and
DVD-RW discs is displayed, and lights out when elapsed time
is displayed.
The right 6 digits of the Multi Display (_) indicate elapsed or
remaining time of each track.
No display: Indicates elapsed time of the disc.
Displayed:
Indicates remaining time of the disc.
(_ Remaining Time/Elapsed
Time Display ,_:_',
pg. 25, 35
(_ Multi Display
Displays clock, received channel, elapsed time, and remaining
time.
Also displays status of the unit.
14 E.
INDEX
RemoteControl
(_
(_
_)
_)
0
@
Audio Button (AUDIO) _ pg. 26
Subtitle Button (SUBTITLE) t_ pg. 25
DVD STANDBY/ON Button (DVD ©/I)_
pg. 40
TV STANDBY/ON Button (TV ©/l)
For turning on/off the power of a JVC TV.
V_ TV Volume Buttons (TV VOL)
For adjusting the volume of a JVC TV.
vi_ Channel Buttons (CH +/-) _ pg. 34
Memo Button (MEMO) _ pg. 44
Mark Button (MARK) _ pg. 25
#_ Timer Button (TIMERQ) _ pg. 37, 38
Satellite Auto Recording Button (REC LINK) _ pg. 42
Navigation Button (NAVIGATION) _ pg. 43
Enter Button (ENTER)
_) Return Button (RETURN) _ pg. 26
P'_ Forward Skip Button (I,-_l) _ pg. 23, 26, 29, 33
!_) Forward Search Button (IH,_) _ pg. 23, 29
Forward Slow Button (SLOW +) =_ pg. 24
_) Play Button (1_)_ pg. 22, 23, 28
Pause Button (11) _ pg. 22, 29
_) Stop Button (11) _ pg. 22
Clear Button (CLEAR) _ pg. 32
Skip Search Button (t'-,_)_
pg. 24, 29
One Touch Replay Button (€_") _ pg. 24, 29
Angle Button (ANGLE) _ pg. 25
Live Check Button (LIVE CHECK)_
pg. 27, 29
Set Up Button (SET UP)_ pg. 18, 58
!_) Progressive Scan Button (PROGRESSIVE SCAN) _ pg. 32,
60
How
To Use
Before use, insert two AA size batteries into the remote control
with the polarity (_ and O) matched correctly as indicated on
the battery compartment or on the lid.
• Point the remote control toward the receiving window.
• The maximum operating distance of the remote control is
about 8 m.
NOTE:
If the remote control doesn't work properly, remove its batteries,
wait a short time, replace the batteries and then try again.
0
O
O
O
O
O
_)
_)
_)
_)
(_
1_
(_)
(_
1_
TV/INPUT Button
For switching the input of a JVC TV.
Open/Close Button (_A)
Number Keys _._ pg. 23, 32, 33
Character Keys _ pg. 46
Cancel Button (CANCEL) _._ pg. 33
Auxiliary Button (AUX)
VCR Plus+ Button _ pg. 37
Program Buttons (PROG) _ pg. 38
Top Menu Button (TOP MENU) _ pg. 23
Selection Keys (_v<l D)
Menu Button (MENU) _ pg. 23
Reverse Skip Button (1<4) _ pg. 23, 26, 29, 33
Reverse Search Button (_1_1)_ pg. 23, 29
Reverse Slow Button (SLOW-) _ pg. 23
Record Button (Q) _ pg. 34, 35
On-Screen Button (ON SCREEN)_
pg. 15, 30
Display Button (DISPLAY) _ pg. 25, 35
Recording Mode Button (REC MODE) _ pg. 34, 42
Remain Button (REMAIN) _ pg. 25, 35
INDEX
When
On-ScreenDisplay
using Live Memory
playback
When ON SCREEN on the remote control is pressed, various
operational indicators appear on the TV screen. To clear the
operational indicators, press ON SCREEN twice.
When
[]
r_
[]
[]
[]
[]
[]
back a recorded
title
[]
[]
[]
[]
r_
[]
[]
Disc type
Audio mode
Current status (playback)
Playback title number
Playback chapter number
Current playback point
Elapsed playing time
When
[]
[]
[]
[]
[]
[]
[]
[]
playing
DV Dubbing
When capturing
equipment
Disc type
Recording mode
Current time
Recording point
Current status (recording)
Elapsed recording time
Audio mode
Recording channel number
Recording mode
Remaining disc time for each recording speed
During
[]
images
from
the external
DV
recording
When pressing REC MODE:
(Appears for eight seconds.)
[]
[]
Disc type
Current time
Bar meter for recording/playback
Recording mode
Current playback time/Elapsed recording time
Audio mode
Recording channel number
Instant
Timer Recording
Record remaining time
(ITR)
[]
[]
[]
[]
[]
[]
[]
Disc type
Current time
Current recording point
Current status (recording)
Elapsed recording time
Sound mode
Recording channel (DV input)
[]
[]
[]
Displays when remote control is set to DV control mode.
Auto capture button
Sound monitor switch
EN
15
16 ENINSTALLING
YOUR NEW UNZT
THESE STEPS MUST BE COMPLETED
OPERATION CAN BE PERFORMED.
| BasicConnection
BEFORE ANY VIDEO
1 Make sure the package contains all of the accessories
"SPECIFICATIONS"
(_ pg. 69).
Antenna or Cable
2
Place the unit on a stable, horizontal surface.
3
Connect the unit to a TV depending
use.
Coaxial cable
listed in
on the TV and cables you
•
To
[]
[]
Matching transformer (not
supplied)
To
ANTENNAIN
AC Outlet
t
AC Power Cord |
To
[ANTENNA
iOUT]
[COMPONENT
VIDE0OUT(Y/
PEdPn)[
Component
video cable
To [VIDEO/
AUDIO
OUTPUT]
To [S-VIDEO
OUTPUT]
Video/Audio
cable (supplied)
S-Video Cable
(not supplied)
(not supplied)
• S-Video Connection
To connect to TV'e S-VIDEO input and AUDIO input
connectors -[] Perform steps [] - [] of "Simple Connections".
[] Connect the unit's [S-VIDEO OUTPUT] connector to the TV's
S-VIDEO input connector.
[] Connect the unit's [AUDIO OUTPUT] connectors to the TV's
AUDIO input connectors.
• You can obtain a high-quality S-VHS picture.
• If your TV is not stereo-capable, use the unit's [AUDIO
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
•
To
[]
[]
Component Video Connection
connect to TV's component video input connectors -Perform steps [] - [] of "Simple Connections".
Connect the unit's [COMPONENT VIDEO OUT (Y/PB/PR)]
connectors to the TV's component video input connectors.
[] Connect the unit's [AUDIO OUTPUT] connectors to the TV's
AUDIO input connectors.
• You can obtain high-quality component video pictures.
• If your TV is not stereo-capable, use the unit's [AUDIO
OUTPUT] connectors to connect to an audio amplifier for Hi-Fi
stereo sound reproduction.
• By using the component video connection, you can view the
images in the progressive mode. For switching to the
progressive mode, refer to "Scan Mode Set" (_'_ pg. 60).
RF cable
qL_:]#z.-To 75 ohm
_,_
[supplied)
terminal
Simple Connections
connect to TV's VIDEO input and AUDIO input connectors -Disconnect the TV aerial cable from the TV.
Connect the TV antenna cable to the [ANTENNA IN] connector
on the rear panel of the unit.
[] Connect the [ANTENNA OUT] connector on the rear panel of
the unit and the TV's antenna connector with the supplied RF
cable.
[] Connect the supplied video/audio cable between the [VIDEO/
AUDIO OUTPUT] connectors on the rear panel of the unit and
the TV's VIDEO/AUDIO input connectors.
• Set your TV to VIDEO mode (or an input mode such as EXT1).
_
It's essential that your unit be properly connected.
4
ATrENTION:
Connect the AC plug only after all connections
been completed.
to the TV has
Plug the end of the AC power cord into an AC outlet. This unit
performs Plug & Play Set automatically.
• "LOADING" blinks on the front display panel when the AC plug
of the power cord is connected into an AC outlet. And it takes
approximately 30 seconds for the unit to be turned on. This is
not a malfunction.
NOTE:
It is necessary to connect any of above audio/video connections in
addition to antenna connection with RF cable in order to view DVD
playback on the TV.
INITIAL SETTINGS
EN17
1 Connect
| Plug& PlaySet
AutoClockSet/Auto TunerSet
This unit sets the clock and tuner channels automatically when AC
power cord is first connected to an AC outlet. The antenna cable
must be connected for the Plug & Play setting.
The time and date are set automatically by the clock setting data
transmitted from one of the regular TV broadcast channels. We call
this TV channel the "host channel" and it is a PBS channel in your
area.
ATTENTION:
Depending on areas or reception conditions, the unit may not
receive the Auto clock setting data from the PBS channel. If this
function is taking a considerable amount of time, it may be
necessary to perform the Semiauto or Manual Clock Set
procedure.
\
'
the antenna cable to the unit. (_._ pg. 16) Then connect
the AC power cord to an AC outlet. Do not turn on the unit. The
clock and tuner channels will be set automatically.
• "LOADING" blinks on the front display panel when the AC plug
of the power cord is connected into an AC outlet and it takes
approximately 30 seconds for the unit to be turned on. This is
not a malfunction.
NOTES:
• Auto Clock Set is performed first. "AUTO" blinks on the front
display panel during Auto Clock Set.
• Auto Channel Set is performed next. Auto Channel Set scans all
the channels that are receivable by your unit. During Auto
Channel Set, the channel numbers are displayed as they are
scanned and set.
• When Plug & Play setting has been completed successfully, the
correct clock time is displayed. If you perform Plug & Play setting
successfully, there is no need to perform "CLOCK SET"
(_ pg. 19) and '_rUNER SET" (_._ pg. 20). If, however, you want
to add or delete channels, refer to "MANUAL CH SET"
(_ pg. 20).
During Auto Clock Set
"AUTO" blinks.
,,4
LI
During Auto Channel Set
The channel numbers are displayed and "AUTO" blinks as
they are scanned and set.
INFORMATION
• If "AUTO CLOCK" is set to "ON" (t:_ pg. 19) the clock will be
adjusted automatically by the host channel using the incoming
PBS channel clock setting data. (This automatic clock
adjustment can only be performed when the unit is turned off.)
• If the memory backup fails, because a power outage occurs or
because the AC power cord is unplugged, Plug & Play will be
performed when power is restored to the unit.
What to do if Plug & Play setting failed
• If an incorrect time is displayed on the front display panel, you
may be receiving the clock setting data of a PBS channel from
an adjacent time zone, or an incorrect PBS channel from a
cable TV system. In this case, perform "Semiauto Clock Set"
(_ pg. 19) or "Manual Clock Set" (_ pg. 19).
• If "- - : - -" appears on the front display panel, your antenna
cable may not be connected to the unit or there may not be a
Host PBS signal available in your area. Ensure that the
antenna cable is connected correctly. Then turn on and off the
unit; the Plug & Play setting will be automatically reactivated. If
Plug & Play setting is not performed though the antenna cable
is connected correctly, perform "Manual Clock Set" (_*_pg. 19)
and "Auto Channel Set" (_ pg. 20) or "Manual Channel Set"
(_ pg. 20).
u,-i
IU
J{U
Tnt
[ U
Plug & Play Completed
The current time is displayed.
• If an incorrect clock time or "- - : - -" appears on the front
display panel, see "What to do if Plug & Play setting
failed" on the left column.
{ P._ _J I { }{}i{
............
L_{"LJ
LJ t°°i {It
18 ENINITIAL
SETTINGS
I Language
On-screenLanguageSet
This unit offers you the choice to view on-screen messages
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
......
Seledio.Keys
(AV_] _)
ENTER
in 3
different languages.
1 Press SET UP to access
the Main Menu screen.
2
Press selection keys to
select "FUNCTION SET
UP", then press ENTER.
3
Press selection keys to
select "DISPLAY SET",
then press ENTER.
4
Press selection keys to
select "ON SCREEN
LANGUAGE", then press ENTER.
5
Press selection
press ENTER.
6
Press SET UP to complete the setting.
keys to select your desired language, then
Menu/Audio/Subtitle LanguageSet
0000
0000
[email protected]
_-oSETUP
Some DVD discs contain the DVD menu display, audio and
subtitles in multiple languages. With these discs, you can set the
default language as you like.
• The procedure shows how to set "MENU LANGUAGE" as an
example.
1 Press SET UP to access the Main Menu screen.
2
Press selection
ENTER.
3
Press selection keys to
select "LANGUAGE
SET", then press
ENTER.
4
Press selection
select "MENU
keys to select "DVD SET UP", then press
AUDIO
OUTPUT
keys to
LANGUAGE", then press
ENTER.
5
Press selection keys to
select your desired
language, then press
ENTER.
• See "Language Code
List". (_:*_pg. 68)
6
Press SET UP to complete the setting.
NOTE:
When the selected language is not available on the disc, the disc's
default menu language is played back.
INITIAL SETTIN6S
EN
19
OFF:
|Clock Set
Perform clock setting only if the clock has not been set correctly by
the Plug & Play setting.
7
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
Select when Daylight Saving Time does not apply to
you.
Press selection keys to
select 'q-IME ZONE",
then press ENTER.
Press selection keys to
select "AUTO" or the
desired time zone, then
press ENTER.
Each time you press
selection keys, the time
zone changes as follows:
--AUTO--ATLANTIC--EASTERN--CENTRAL--MOUNTAIN
--PACIFIC--ALASKA--HAWAII--(back
to the beginning)
=Selection
Keys(AV_)
ENTER
NOTE:
If an incorrect time is displayed by the Plug & Play function, you
may be receiving the clock setting data of a PBS channel from an
adjacent time zone or from an incorrect PBS channel from a cable
TV system. If you selected "AUTO" for the host channel in step 5,
be sure to select the correct time zone manually.
8 Press SET UP to end.
o
IMPORTANT:
J
Turn off the unit after performing Semiauto Clock. "AUTO" will
J
appear on the front display panel while the clock is being set. The I
current clock time will appear automatically when the clock setting
czJ_
-_o88
0000
[email protected],_,
......
SETUP
s competed.
AUTO DAYLIGHT SAVING TIME
This function enables automatic adjustment of the unit's clock at
the start and end of Daylight Saving Time.
SemiautoClockSet
You can change the host channel/D.S.T.
time zone setting manually.
(Daylight Saving Time)/
With DST set to "ON"- on the first Sundayof April at 2:00AM,the clockis adjustedto 3:00AM.
-- on the last Sundayof Octoberat2:00 AM,theclock is adjustedto 1:00AM.
NOTE:
Timer recording may not function correctly at the time Daylight
Saving Time is adjusted.
NOTE:
The time set previously will be erased when "AUTO CLOCK",
"HOST CH [CATV]", "D.S.T." or "TIME ZONE" setting is changed.
1 Press SET UP to access the Main Menu screen.
2
3
4
5
Press selection keys to
select"INITIALSETUP",
I
then press ENTER.
TUNERSET
Press selection keys to
select "CLOCK SET",
then press ENTER.
Press selection keys to
select "AUTO CLOCK",
then press ENTER.
Press selection keys to
select "ON", then press
ENTER.
Press selection keys to
select "HOST CH
[CATV]", then press
ENTER.
Press selection keys to select "AUTO" or the desired PBS
channel number, then press ENTER.
NOTE:
Some PBS channels do not transmit clock setting data.
6
Press selection
Press selection
ENTER.
AUTO:
ON:
ManualClockSet
1
Press SET UP to access the Main Menu screen.
2
Press selection
ENTER.
keys to select "INITIAL SET UP", then press
3
Press selection
keys to select"CLOCK SET", then press ENTER.
4
Press selection keys to select "AUTO CLOCK", then press ENTER.
Press selection keys to select "OFF", then press ENTER.
5
Press selection keys to select 'q-IME", then press ENTER.
Press selection keys until the desired time appears, then
press ENTER.
• The confirmation screen appears.
6
Press selection keys to select "OK", then press ENTER for
confirmation.
7
Set "DATE" and "YEAR"
in the same way as in
step 5.
• Holding _.v changes
the time in 30-minutes
interval, or changes the
date in 15-days interval.
8
Press selection keys to
select "D.S.T.", then
press ENTER. Press
selection keys to select the desired setting, then press
ENTER.
ON:
Adjustment will be made by the built-in clock itself.
OFF:
Select when Daylight Saving Time does not apply to
you.
9
Press SET UP to complete the setting.
keys to select "D.S.T.", then press ENTER.
keys to select the desired setting, then press
Select if you want to adjust your unit's clock
automatically by the incoming signal from the host
channel. Be sure to select the correct time zone
manually in step 7.
Adjustment will be made by the built-in clock itself.
20 ENINITIAL
SETTINGS
I TunerSet
ManualChannelSet
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
You can add the channels you want or delete the channels you do
not want manually.
1 Press SET UP to access the Main Menu screen.
2
® [email protected]
3
4
C2Z22i22222_
Press selection keys to
select" INITIAL SET UP"
then press ENTER.
CLOCK
SET
Press selection keys
select 'q-UNER SET",
then press ENTER.
Press selection keys to
select "MANUAL CH
SET", then press
ENTER.
5 Add or skip the desired channels.
= Selectio.
Keys(AV_
ENTER
=RETURN
})
-Jo68
0000
[email protected]
SETUP
NOTE:
The unit selects the correct band (TV or CATV) automatically
during Auto Channel Set. The selected band will be displayed on
the right side of "BAND" on the Tuner Set screen.
AutoChannel
Set
Perform Auto Channel Set only if channels have not been set
correctly by the Plug & Play setting.
1 Press SET UP to access the Main Menu screen.
2
Press selection keys to
select"lNITIAL
SET UP",
then press ENTER.
3
Press selection keys to
select 'q-UNER SET",
then press ENTER.
4
CATV
Press selection keys to
select "AUTO CH SET",
then press ENTER.
• You can automatically
set the receivable channels in your area in the order of their
frequencies.
• When Auto Channel Set is completed, "SCAN COMPLETED"
appears on screen.
• If the scan was unsuccessful, "SCAN COMPLETED-NO
SIGNAL-" appears on screen. Check the connections and start
again.
To add channels
[] Press selection keys to _ _
,,_, _,_._
select "CH [CATV]", then
press ENTER.
[] Press selection keys to
select a channel number
you want to add, then
press ENTER.
[] Press selection keys to
select "ADD/SKIP", then
press ENTER.
[] Press selection keys to select "ADD", then press ENTER.
[] Repeat [] -- [] to add other channels.
To skip channels
[] Press selection
ENTER.
[] Press selection
skip, then press
[] Press selection
ENTER.
[] Press selection
[] Repeat [] -- []
6
keys to select "CH [CATV]", then press
keys to select a channel number you want to
ENTER.
keys to select "ADD/SKIP', then press
keys to select "SKIP", then press ENTER.
to skip other channels.
Press SET UP or RETURN twice to complete the setting.
INITIAL SETTINGS
EN21
1 Press SET UP to access the Main Menu screen.
| MonitorSet
2
Press selection keys to
select "FUNCTION SET
UP", then press ENTER.
3
Press selection keys to
select "VIDEO IN/OUT",
then press ENTER.
4
Press selection keys to
select "MONITOR
You can select the monitor type depending on the TV used when
you play back DVD VIDEO discs recorded for wide-screen TVs.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
TYPE", then press
ENTER.
5
= Selection
Keys(/',V<_ D)
ENTER
6
Press selection keys to
select the desired
setting, then press
ENTER.
Press SET UP to
complete the setting.
* The boldface
purchase.
_o88
settings in the table below indicate the settings at your
• MONITORTYPE-- 4:3LB/ 4:3PS/ 16:9AUT0/ 16:9FIX
0000
[email protected]
SETUP
4:3LB (Letter
Select this
TV). While
on the top
Box conversion):
when the aspect ratio of your TV is 4:3 (conventional
viewing a wide screen picture, the black bars appear
and the bottom of the screen.
4:3PS (Pan&Scan):
Select this when the aspect ratio of your TV is 4:3 (conventional
TV). While viewing a wide screen picture, the black bars do not
appear; however, the left and right edges of the pictures will not
be shown on the screen.
16:9AUTO (Wide television conversion):
Select this when the aspect ratio of your TV is 16:9 (wide TV).
16:9FIX (Wide television conversion):
Select this when the aspect ratio of your TV is fixed to 16:9
(wide TV). The unit automatically adjusts the screen width of
the output signal correctly when playing back a picture whose
aspect ratio is 4:3.
Pan&Scan/Letter
Box
In general, DVD VIDEO disc are produced for a wide-screen TV
with 16:9 aspect ratio.
Material with this ratio will not fit to a TV with 4:3 aspect ratio.There
are two styles to display the image, "Pan&Scan" (PS) and "Letter
Box" (LB).
Pan&Scan
The right and left side of the image are cut off.
The image fills the screen.
• The picture will be shown in the "4:3LB"
mode depending on the disc even if the
"4:3PS" is selected.
Letter
Box
Black bands appear at the top and bottom of
the image. The image itself appears in 16:9
aspect ratio.
22 ENBASXC OPERATXONS ON
DVD DECK
To play back an MP3/JPEG
Navigation" (_ pg. 52).
| BasicPlayback
disc, see "Playback With MP3/JPEG
1 Load a disc.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
A
• For details, refer to "Placing A Disc" (_._pg. 10).
• Pressing A_also closes the disc tray.
• Playback begins automatically if an auto-playback
loaded.
2
Press I_ to start playback.
• If you load a DVD disc whose region code does not match the
unit, "REGION CODE ERROR CHECK DISC" appears on the
TV screen. For details, refer to "Region Number" (_ pg. 8).
• With Video CD/SVCD discs with PBC control or some DVD
discs, the menu display may appear on the TV screen after
starting playback. In this case, select an item which you want to
play back from the menu. For details, refer to "Playback Control
(PBC) Function" (_*_pg. 26) or "Locating A Desired Scene
Using The DVD Menu" (t:,_pg. 23).
• The Library Database Navigation also enables you to search
and scan the beginning of the desired titles. (_._ pg. 44)
3
Press II to pause playback.
• To resume normal playback, press _-.
4
Press • to stop playback.
• When a recordable disc is played, playback stops and a
program received with the unit's tuner resumes on the TV
screen.
• When a playback-only disc is played, playback stops and the
TV screen becomes all blue when you press 0. Pressing •
again resumes a program received with the unit's tuner.
• If A_is pressed during playback, playback stops, then the disc
tray opens.
•
CC_C_3CCZC_
_ENTER
_11
--0
0000
O0
ATI"ENTION:
• It takes approximately 30 seconds to read a disc depending oil
the type and condition of the disc since this unit is multi-disc
compatible (DVD-RAM, DVD-RW, DVD-R). It may even take
several minutes when a disc is dirty, scratched or warped.
• It may take a few seconds to start playback. This is not a
malfunction.
• Forward/reverse high-speed search and other operations
cannot be performed while playback is stopped.
DVD disc is
NOTE:
When the Library Database Navigation screen appears, choose a
thumbnail image of the desired title on the TV screen, then press
ENTER. (_ pg. 44)
BASIC OPERATIONS ON DVD DECK
EN23
LocatingTheStart PointOf TheItem Or SkipTheItem
| Playback
Features
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
® o_
Press i_ or _-_1 during playback.
• Pressing _,-D,-Ilocates the start point of the title (or track) or skips
to the marked point in the forward direction, then resumes
playback.
• Pressing I_-_ locates the start point of the title (or track) or skips
to the marked point in the reverse direction, then resumes
playback.
Current playback
point
= 0-9
TOPMENU=
Selection
Keys
(_.V<_ _)
ENTER
MENU-.......
I_1_1
= ZD._._/SLOW
+
44/SLOW ........
0088
0000
Reverse_
O0
I_1_1
I_b-I ,_1_
Forward
• : marked points (_ pg. 25)
VariableSpeedSearch
LocatingA DesiredSceneUsingThe DVDMenu
DVD VIDEO discs may have top menu and disc menu.
Top menu
DVD discs generally have their own menus which show the disc
contents. These menus contain various items such as titles of a
movie, names of songs, or artist information. You can locate a
desired scene by using the top menu displayed on the TV screen.
Press TOP MENU to access the top menu.
Disc menu
Disc menus include playback data (angle menu, subtitle menu,
etc.) specific to each title.
Press MENU to access the disc menu.
1 Press TOP MENU or
MENU to access the
DVD menu.
2
Example:
_]
• starts
may
bepossible
to
select the desired item
using the number keys
depending on the menu
display.
• To resume normal playback, press I_.
OR
During playback, press and hold _,-D,-I
for 2 or more seconds for
forward variable speed search, or press and hold I-_-_ for 2 or more
seconds for reverse variable speed search.
• Releasing the button resumes normal playback.
Still Picture/Frame-By-Frame
Playback
1 Press II to pause during playback.
2
Press selection keys
to select the desired
title, then press
ENTER. The playback
During playback, press I,,-Ib for forward variable speed search, or
4_1 for reverse variable speed search.
• Each press of the button increases the search speed for each
direction.
:;::;;:;:;;:;;:;;:;;:
NOTE:
When "Q" appears on the TV screen in step 1, the disc does not
have a top menu or disc menu.
Press II to activate frame-by-frame playback.
• Each press of the button advances the still picture frame by
frame.
OR
Press <1or L> to activate frame-by-frame playback.
• Each press of <_or D advances/reverses the still picture frame by
frame.
• Frame-by-frame playback for reverse direction cannot be
performed with Video CD/SVCD discs.
• To resume normal playback, press I_.
24 ENBASIC
OPERATIONS ON DVD DECK
ResumeFunction
O_
¸ <_DVD0/I
It is possible to memorize the position where you stop playback
and resume playback from that position.
• Be sure to set "RESUME"
to "ON" or "DISC
J _ _K:J
RESUME". (_ pg. 60)
MARK
TOPMENU
Selection
Keys(/_V_ _)
o ENTER
MENU,,.,.
)-_/SLOW +
<</SLOW --
II
REMAIN
SUBTITLE
--
A'n'ENTION:
ooQ2
SlowMotion
1
2
When a playback-only disc is played, pressing • once results in
a blue screen. To perform Resume Function with these discs,
follow the procedures as described below under the blue screen
condition.
ANGLE
Press II to pause during playback.
Press SLOW - (44), then press SLOW + (1_).
• Each press of SLOW - (<41) or SLOW + (1_) increases the
slow motion speed for each direction.
• Slow motion for reverse direction cannot be performed with
Video CD/SVCD discs.
OR
Press and hold _<< or )-_mfor 2 or more seconds.
• Releasing the button resumes normal playback.
SkipSearch
1 Press • during playback to memorize a resume point.
• The unit enters Resume Stop mode and memorizes the
position where you have stopped playback as a resume point.
(The inside of the disc status indicator on the front display panel
blinks while memorizing.)
• The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected if
"RESUME" is set to "DISC RESUME". (_ pg. 60)
• To clear the resume points:
(The inside of the disc status indicator stops blinking and
lights.)
When "RESUME" is set to "ON":
• Press DVD ©/I to turn off the unit.
• Press A to take out the disc.
• Press • in stop mode.
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
When "RESUME" is set to "DISC RESUME":
• "RESUME" must be set to "OFF". (_', pg. 60)
• Press • in stop mode,
• Press TOP MENU to display the top menu, then start playback by
selecting an item, etc.
• Press MENU to display the disc menu, then start playback by
selecting an item, etc.
__}
Press _
during playback.
• Each press initiates an approximately 30 second period of fastmotion playback. Normal playback resumes automatically.
• This function is not possible when playing back a Video CD using
the PBC function.
OneTouchReplay
You can move back the playback position slightly.
Press €_".
• Each press skips back for approximately 7 seconds and resumes
playback.
• Pressing while paused skips back for approximately 7 seconds
and resumes pause.
• This function is not possible when playing back a Video CD using
the PBC function.
2
Press I_ in stop mode to resume playback. The unit starts
playback from the resume point.
NOTES:
• "DISC RESUME" setting works on DVD VIDEO, VCD, SVCD and
finalized DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under "ON" setting will be applied even if
"RESUME" is set to "DISC RESUME". (_*_pg. 60)
• If you stop the playback of a disc for which a resume point has
already been memorized, the memory will be updated with the
new resume point.
• After the unit has memorized the resume points for 30 discs,
remembering a new resume point will cause the unit to delete the
oldest memorized point. Stopping playback of a disc for which a
resume point is already stored may change the order in which the
points are stored. This may potentially change the order in which
points are deleted.
• When the unit memorizes a resume point for a disc, it also
remembers audio language, subtitle and angle settings.
• This function may not work for some Video CD/SVCDs.
• When "RESUME" is changed to "ON" or "OFF" (_'_ pg. 60),
resume points of the discs memorized with "RESUME" set to
"DISC RESUME" will be cleared.
• Resume points are memorized
disc.
for each side of a double-sided
BASX6 0PERATXONS ON DVD DECK
EN25
MarkingPositionsTo Play BackAgainLater
AngleSelection
It is possible to mark positions (up to 999 points) where you want
to play back once again later, and start playback from a marked
position.
You can enjoy a variety of scene angles if a DVD VIDEO disc
contains "multi-angle" parts, where the same scene was shot from
different angles.
If the disc contains "multi-angle" parts, "_:_" appears on the TV
screen at the beginning of the "multi-angle" part.
To mark positions:
During playback, press MARK at
positions you want to mark.
• "MARK" is displayed on the TV
screen. You can easily locate the
marked positions using 144 or _,-_l
when you play back the disc.
MARK
To delete the marked positions:
While paused, press i-_4 or =,-=,-]to
locate a marked position you want to
delete, then press MARK.
• Crossed "MARK" appears on the TV
screen, and the marked position is
deleted.
NOTES:
• When a monaural program changes to a stereo program while
recording, a mark signal is automatically recorded.
• When a DVD-R/RW (Video mode) disc is finalized, marked points
that are marked at the desired locations during playback are
deleted and new marks are assigned automatically
approximately every 5 minutes. (_ pg. 64)
• If MARK is pressed when playing back a disc that does not allow
marks to be inserted, "(_" appears on the TV screen.
Checking
TheTimeInformation
1 Press ANGLE during
playback. The angle selection
display appears on the TV
screen,
Press ANGLE or selection
When 3 scene angles are
contained.
keys to select your desired
angle.
• Each time you press ANGLE or the selection keys, the angle
changes.
• When "Q" appears on the TV screen, the current scene is not
recorded from multiple angles. In addition, some discs prohibit
angle selection.
• To clear the angle selection display, press ENTER. In addition,
the angle selection display disappears automatically if no
operation is done for 5 seconds.
SubtitleSelection
Some DVD VIDEO discs contain more than one subtitle language,
from among which you can choose the desired subtitle language.
"[_]" appears on the TV screen at the beginning of the part where
more than one subtitle language are recorded.
1 Press SUBTITLE during
playback. The subtitle
You can check time information
and the TV screen.
of a disc on the front display panel
Each press of DISPLAY changes the display as follows:
• DVD-RAM/DVD-R/DVD-RW
During recording/playback
or in stop mode
Clock time _ Current title elapsed time _ Disc remaining time
(back to the beginning)
• The clock time is displayed on the front display panel only.
• The clock time and disc remaining time will not be displayed
when playing back finalized DVD-R/RW discs.
In stop mode or during playback
• It is possible to check disc remaining time according to recording
modes also by pressing REMAIN.
• In FR mode, it is possible to set recording time in detail. While the
recording mode and the disc remaining time are displayed by
pressing REMAIN, press selection keys to select "FR", then
select the desired recording time. (_*_pg. 36)
• It is not possible to switch the recording mode during playback or
while recording.
•
Video CD/SVCD/Audio
CD
During Playback or in stop mode
Current track elapsed time _ Current track remaining time _ Total
elapsed time _ Total remaining time _ (back to the beginning)
NOTE:
When a PBC-compatible Video CD/SVCD disc is loaded,
deactivate the PBC function. (_ pg. 26)
selection display appears on
the mv screen,
• Each time you press
SUBTITLE, the subtitle display
is switched on and off.
When 3 subtitle languages are
contained.
Press selection keys to select your desired language.
• To clear the subtitle selection display, press ENTER.
NOTES:
• For disc that does not contain subtitle language, the number of
selectable languages will not be displayed. "-/-" appears on the
TV screen.
• When the subtitle language won't be changed with the procedure
above, change the subtitle on a disc menu displayed by pressing
MENU.
26 ENBASIC
OPERATIONS ON DVD DECK
AudioLanguage/Sound
Selection
Some DVD VIDEO discs contain the multiple audio language or
sound. You can select the desired audio language or sound. For
some Video CD/SVCD discs, you can switch the audio channel to
choose Karaoke either with or without the vocal.
-- 0-9
TOPMENU.............
Selection
Keys(_V_
ENTER
MENU...........
_>)
.........
RETURN
1414 .........
0000
O0
AUDIO.............
,- SETUP
When watching bilingual programs or playing discs on which you
recorded bilingual or stereo programs, you can choose the desired
audio channel.
• When "SUPERIMPOSE"
is set to "AUTO", you can confirm on
the TV screen the audio channel you have chosen. (_ pg. 59)
• Each time you press AUDIO, the audio
channel changes.
On-Screen
0))4
L + R
USE
Display
[>[:_
2
For Example: DVDVIDEO
When 3 audio languages are
Press AUDIO or selection
contained,
keys to select your desired
audio language/sound.
• Each time you press AUDIO or the selection keys, the audio
language/sound changes.
• To clear the Audio Language/Sound selection display, press
ENTER.
NOTES:
• When "Q" appears on the TV screen, no audio language is
recorded.
• When the audio language won't be changed with the procedure
above, change the audio on a disc menu displayed by pressing
MENU.
• Pressing AUDIO to select the audio language/sound is only
possible during playback. It is net possible to select by pressing
AUDIO in stop mode. However, you can select the desired audio
language/sound from the setup menu while in stop mode.
AudioChannelSelection
TRACK
1 Press AUDIO during playback.
The Audio Language/Sound
selection display appears on
the TV screen.
PlaybackControl(PBC)Function
Some Video CD/SVCD discs support the PBC function. PBC is an
abbreviation
of "Play Back Control". A Video CD/SVCD disc
recorded with PBC has its own menus, such as a list of the songs
on the disc. You can locate a specific scene by using the menu.
1 Press
For stereo discs
O))4t L FR_
For audio of left channel
0))4 RI>_
For audio of right channel
When you can't switch the audio channel of a bilingual
program
When the unit is connected with a digital audio device using an
optional coaxial cable and "DIGITAL AUDIO OUT" is set to
"DOLBY DIGITAL/PCM', it is not possible to switch the audio
channel of a bilingual program recorded on a DVD-RAM or
DVD-RW (VR mode) disc. (_ pg. 58). In this case, perform the
following steps using the remote control to switch "DIGITAL
AUDIO OUT" from "DOLBY DIGITAL/PCM" to "PCM ONLY".
Press SET UP to access the Main Menu screen.
[] Press selection keys to select "DVD SET UP", then press
ENTER.
[] Press selection keys to select "AUDIO OUTPUT", then press
ENTER.
r_ Press selection keys to select "DIGITAL AUDIO OUT", then
press ENTER.
[] Press selection keys to select "PCM ONLY", then press
ENTER.
[] Press SET UP to complete the setting.
[] Press AUDIO to select the desired audio channel.
_ in stop mode. The PBC menu appears.
Press the number keys to enter the number of the desired
scene, then press ENTER. The unit starts playback of the
selected item.
• "PBC" is displayed on the front display panel.
• When "NEXT" or "PREVIOUS" appears on the TV screen:
Pressing i,-i,-] advances to the next page.
Pressing I_-_ returns to the previous page.
• You can return to the menu by pressing RETURN.
• The method of the operation is different depending on the disc.
NOTES:
• If you want to play back a PBC-compatible Video CD/SVCD disc
without activating the PBC function, start playback in stop mode
by using the number keys, instead of the • button, to choose the
track, then press ENTER.
• To activate the PBC function when a PBC-compatible Video CD/
SVCD disc is being played back without the PBC function, press
• then press •.
BASXC OPERATXONS ON DVD DECK
E. 27
I LiveMemoryPlayback
You can watch a recorded portion of a program even before recording ends (Live Memory Playback), or watch other programs
(Simultaneous Recording and Playback) while continuing to record onto the DVD-RAM disc.
(Recording
screen)
(Live Memory
Playback screen)
To start Live Memory Playback,
press I_ to play back from the
beginning OR press _'
reverse skip a little,
To stop Live Memory
press m
Playbac k,
To clear, press LIVE
CHECK.
To stop recording,
press m.
Checking the
picture currently
being recorded
(Playback
To stop Live Memory
press I,
Recording
and Live Check screen)
playback,
Live Memory Playback
picture
Current playback point
(Live Memory Playback)
Recording start point
I
0
I,
(Recording point)
Current recording position
!
_
Playback
_
cent'nuea
30 min
Currently elapsed recording time
] , Recording
J _4_continues
1 hour
' I
To display, press
LIVE CHECK.
Recording
picture
NOTES:
• Live Memory Playback could be performed approximately
30 seconds after recording has started.
• Although high-speed search up to approximately 30 seconds
before the current recording point is possible during Live Memory
Playback, once the current recording point is reached, the unit
resumes normal playback and maintains a delay of
approximately 30 seconds so that recording and playback can
continue.
• When using Live Memory Playback during timer recording, the
unit remains turned on and playback continues even after the
end of the recording.
• When using Live Memory Playback during timer recording,
playback is automatically stopped just before recording starts,
and then recording starts when the time arrives for the next timerprogram.
• It is impossible to perform ITR even if you press • during Live
Memory Playback. Press • to display the program being
recorded, then perform ITR settings.
• Playback may be paused for a moment during Live Memory
Playback, which does not interfere with recording.
• When LIVE CHECK is pressed to display the picture currently
being recorded, the picture size may not be correct.
• Live Memory Playback cannot be performed while recording the
source from DV input.
28 ENBASIC
OPERATIONS ON DVD DECK
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
LiveMemoryPlayback
You can playback the previous part of the channel you are
recording.
To watch from the recording start point
1
Press I_ during recording.
To watch from the point after reverse skipping a little during
recording
1
Press _
during recording.
• Live Memory Playback could be performed approximately 30
seconds after recording has started.
• Pressing once skips back for approximately 7 seconds and
resumes playback.
-o NAVIGATION
-- Selection
Keys(AV_
ENTER
Simultaneous
Recordingand Playback
_)
You can playback other programs available in the Library
Database Navigation on the disc.
To watch other previously recorded programs during
recording
0000
O0
Live Memory Playback status can be checked by
pressing ON SCREEN
to display the bar meter on the
superimpose display. The current status is
superimposed on the TV screen.
Bar meter display
1
Press NAVIGATION
screen.
2
Press selection
ENTER.
keys to select "ORIGINAL",
3
Press selection
ENTER.
keys to select a desired program, then press
to display the Library Database Navigation
then press
BASIC OPERATIONS ON DVD DECK
ButtonsTo Be UsedDuringLiveMemoryPlayback
EN29
O ),.-ib
• Each press of the button during playback advances the
playback speed in 4 steps in the forward direction.
• Pressing during pause mode advances playback at a slower
speed.
en
• Pressing once stops Live Memory Playback and returns to the
screen on air.
• Pressing again stops the recording and returns to the screen on
air.
0 II
• Pressing once pauses playback (still picture playback).
• Pressing repeatedly advances the still picture frame by frame.
0 NAVIGATION
0_
04--
QN-
0
I_l)-I
011
oo©@
O00_
,ooo
_ LIVECHECK
O0
0
NAVIGATION
Displays Library Database Navigation menu. You can choose a
title to play back.
04
Pressing during pause mode reverses the still picture frame by
frame.
Pressing during pause mode advances the still picture frame by
frame.
_1
1414
• Pressing once skips back to the beginning of the program or
chapter being played back.
• Pressing down for 2 or more seconds during playback reverses
playback at a faster speed. Releasing the button resumes
normal playback.
Available only when paused
• Pressing down for 2 or more seconds reverses playback at a
slower speed.
• Pressing once skips forward to the next program or chapter
being played back.
• Pressing down for 2 or more seconds during playback
advances playback at a faster speed. Releasing the button
resumes normal playback.
Available only when paused
• Pressing down for 2 or more seconds advances playback at a
slower speed.
0 44
• Each press of the button during playback advances the
playback speed in 5 steps in the reverse direction.
• Pressing during pause mode reverses playback at a slower
speed.
It is useful when skipping over unwanted sections.
• Pressing once skips forward for approximately 30 seconds and
resumes playback.
• Pressing repeatedly skips forward continuously as many times
as pressed.
It is useful when watching sports programs, etc.
• Pressing once skips back for approximately 7 seconds and
resumes playback.
• Pressing repeatedly skips back continuously as many times as
pressed.
i_ LIVE CHECK
You can check, for example, if the program you are recording
has already finished.
• Pressing once displays the picture currently being recorded and
the one being played back simultaneously.
• Pressing successively clears the Live Check window and
displays only the picture currently being played back.
30 ENBASIC
OPERATIONS ON DVD DECK
| UsingTheOn-screen
Bar
The on-screen bar allows you to control various playback
functions. Some of the functions operated on Navigation Menu can
be controlled on the On-screen bar.
Be sure to clear Library Database Navigation screen by pressing
NAVIGATION.
[]
[]
[]
[]
I_]
[]
[]
[]
[]
[]
Disc type.
Select this for Repeat Playback. (_ pg. 30)
Select this for A-B Repeat Playback. (u_ pg. 31)
Select this for search function. (_', pg. 31)
Select this for time search function. (u pg. 32)
Select this for Picture Control function. (_ pg. 32)
Select this to switch picture source type. (_ pg. 32)
Current status area for the selected item.
Select this for Program Playback. (_ pg. 33)
Select this for Random Playback. (_*_pg. 33)
Select this to control the switching interval of the slide show.
(_ pg. 33)
NOTE:
Although examples of the on-screen bar are provided here only for
3 types of discs, the on-screen bar will be displayed for whichever
disc indicated in the left column.
BasicOperationOn TheOn-screenBar
Example: When selecting Picture Control function of DVD
-- 0-9
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar. The
CANCEL
.......
item currently selected is highlighted
and pointed by _.
= NAVIGATION
-- Selection
Keys(_V<
ENTER
a
CLEAR(m)
.......
o q__o_
0000
_)
2
Press selection keys to select "_",
then press ENTER. The
pop-up window appears under the selected item.
3
Press selection keys to select the desired option, then press
ENTER.
ONSCREEN
O0
How To AccessTheOn-screenBar
1
Press ON SCREEN twice whenever a disc is loaded.
Contents of the on-screen
DVD VIDEO
bar during
playback
SOFT
To clear the on-screen
Press ON SCREEN.
bar
NOTE:
See the corresponding
pages for details on each menu item.
RepeatPlayback
Video CD/Super
Video
CD
You can repeat playback as you like according to the type of disc.
1 Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select "C_,._",then press ENTER. The
pop-up window appears under the selected item.
JPEG disc
CHAPTER
REPEAT
3
Press selection keys repeatedly to select the desired Repeat
mode, then press ENTER.
BASXC OPERATIONS ON DVD DECK
DVD-RAM/RW/R
OFF:
Repeat pFayback is not performed.
ALL REPEAT:
The whole disc is played back repeatedly.
TITLEREPEAT:
The current title is played back repeatedly.
EN31
• The point B must be set at least 3 seconds after the point A.
• When playing back a DVD, A-B Repeat Playback is possible only
within the same title.
• "A-B C_,,_"cannot be selected during Program and Random
Playback.
• "A-B C_,,_"cannot be selected while stopped.
LocatingThe BeginningOf A DesiredSelection
DVD VIDEO
OFF:
Repeat playback is not performed.
You can locate the beginning of a title, chapter, group or track.
TITLEREPEAT:
The current title is played back repeatedly.
CHAPTER
REPEAT:
The current chapter is played back repeatedly.
During playback or while stopped
1 Press ON SCREEN twice to access the on-screen bar.
2
Press selection
keys to select "_1", then press ENTER.
3
Press selection keys to select the desired option, then press
ENTER.
Audio CD/Video CD/SVOD/JPEG/MP3
OFF:
Repeat pFayback is not performed.
CHAPTER
SEARCH
ALL REPEAT:
The whole disc is played back repeatedly.
TRACKREPEAT*:
The current track is played back repeatedly.
* 'TRACK REPEAT"cannot be selected for JPEG discs,
• Skip this step for Video CD/SVCD
NOTE:
To clear the on-screen
Press ON SCREEN.
Settings that are selectable during playback and stop mode differ
depending on the type of disc and search used.
bar
To cancel Repeat Playback
Repeat the above procedure from step 1, select "OFF" in step 3,
then press ENTER.
NOTES:
• Repeat Playback is not possible for a Video CD/SVCD with PBC
function.
• Repeat Playback may not work properly depending on the type of
the disc being used.
A-B RepealPlayback
You can repeat the desired part.
During Playback
1 Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select "A-B C_,,._".
3
Press ENTER at the beginning of the desired part you want to
repeat (point A). The elapsed playing time of the point A
appears.
4
Press ENTER at the end of the desired part you want to repeat
(point B). The elapsed playing time of the point B appears.
• The selected part of the disc (between point A and B) is played
repeatedly.
To clear the on-screen
Press ON SCREEN.
bar
To cancel A-B Repeat Playback
Press selection keys to select "A-B C_,..)",then press ENTER.
NOTES:
• A-B Repeat Playback may not work properly depending on the
type of disc being used.
• The subtitles recorded around the A-B point may not appear.
• When the end of the item is reached before the end point is set,
the on-screen bar disappears from the TV screen. In such a
case, repeat the procedure from step 1.
and Audio CD.
4
Press the number keys to enter the desired title or chapter
number, then press ENTER.
• Playback starts from the selected section.
Examples:
To select track 5, press the number key "5".
[] To select track 15, press the number keys "1" and "5".
[] To select track 25, press the number keys "2" and "5".
If you have specified a wrong number
Press CLEAR(N) or CANCEL on the remote control and re-enter
again.
To clear the on-screen
Press ON SCREEN.
bar
NOTES:
• When "Q" is displayed on the TV screen in step 4, the chapter
you have selected is not contained in the disc, or chapter search
does not work on the disc.
• Before you press ENTER, playback may start automatically when
you enter the section's number depending on the disc.
• This function is not possible for a Video CD/SVCD with PBC
function.
32 EN BASXC OPERATXONS ON
DVD DECK
AdjustingThe PictureQuality
'E
-
You can obtain optimal picture quality by selecting an appropriate
picture mode.
1 Press ON SCREEN twice to access the on-screen bar.
0-9
CANCEL-,,,,
2
Press selection keys to select "_",
then press ENTER. The
pop-up window appears under the selected item.
3
Press selection keys to select the desired option, then press
ENTER.
ENTER=
-- Seledio. Keys(/',V<_ D)
1414 --
SOFT
,= CLEAR(m)
00
ONSCREEN= 0_
0000
O0
NORMAL:
Normally select this.
CINEMA:
Suitable for a movie disc, etc.
SHARP:
Clearer, sharper-edged picture when viewing images with lots
of flat, same-colored surfaces such as cartoons.
TimeSearch
SOFT:
Select this option when too much noise appears.
You can play back a disc from the desired point by specifying the
elapsed playing time from the beginning of a program (DVD-RAM,
DVD-R, DVD-RW and DVD VIDEO) or a disc (Video CD/SVCD
and Audio CD).
To clear the on-screen
Press ON SCREEN.
bar
SettingTheProgressiveMode
1 Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select"C)_",
then press ENTER. The
pop-up window appears under the selected item.
iiiD
You can obtain optimal picture quality by selecting whether the
content on the disc is processed by field (video source) or by frame
(film source).
1 Set the unit to the progressive
scan mode. (_ pg. 60)
Press ON SCREEN twice to access the on-screen bar.
3
Press the number keys to enter the desired title or chapter
number, then press ENTER. Playback starts from the specified
time.
Example:
To play back from a point 12 (minutes): 50 (seconds) elapsed.
,,,I,
Press 1
3
Press selection keys to select '_",
then press ENTER. The
pop-up window appears under the selected item.
Press 2
VIDEO
Press 5
_iilii
Press 0
4
Press selection
ENTER.
keys to select the desired option, then press
AUTO1:
If you have specified a wrong number
Press CLEAR(N) or CANCEL on the remote control and re-enter
again.
To clear the on-screen bar
Press ON SCREEN.
NOTES:
• When "Q" is displayed on the TV screen in step 3, you have
selected a point that exceeds the recording time of the disc.
• Some DVD VIDEO discs do not contain time information, and it is
not possible to use the Time Search function. In such cases, "Q"
is displayed on the TV screen as well.
• This function is not possible for a Video CD/SVCD with PBC
function.
This mode automatically detects film and video content for
progressive playback. When film content is found, flag
detection is used to invoke playback of film data in full screen.
When video content is found, pictures from multiple fields are
used to detect sections with movement, and then this
movement undergoes advanced image processing for output of
sharp, detailed progressive images without any reduction in
image quality where movement occurs. Normally, operation in
this mode is recommended.
AUTO2:
Only the processing of sections with movement differs from
"AUTO 1".
For video contents, the sections with movement are detected
and the pictures are corrected by the filtering process for
motion pictures.
FILM:
Suitable for playing back a progressive scanned film source disc.
BASIC OPERATIONS ON DVD DECK
VIDEO:
Suitable for playing back a video source disc. The outlines on
the played back pictures will be soft.
To clear the on-screen
Press ON SCREEN.
E. 33
RandomPlayback
bar
You can play back all the tracks on the disc in random order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
ProgramPlayback
2
Press selection keys to select "RND", then press ENTER.
Playback starts in random order.
You can program up to 30 tracks (Video CD/SVCD or Audio CD) to
play back in the desired order.
While stopped
1 Press ON SCREEN twice to access the on-screen bar.
To clear the on-screen
Press ON SCREEN.
2
Press selection keys to select "PRGM", then press ENTER.
The program table appears under on-screen bar.
To cancel Random Playback
Perform steps 1 and 2.
3
Press the number
desired order.
NOTE:
The same track will not be played back more than once during
Random Playback.
keys to enter the track numbers in the
bar
SelectTheSwitchingIntervalOf TheSlideShow
You can control the switching interval of the slide show.
1 Press ON SCREEN twice to access the on-screen bar.
2
Press selection keys to select "_",
then press ENTER. The
pop-up window appears under the selected item.
Examples:
[] To select track 5, press the number key "5" and ENTER.
[] To select track 15, press the number keys "1" and "5".
[] To select track 25, press the number keys "2" and "5".
If you have specified a wrong selection
Press CANCEL. The last selection is erased.
Or press CLEAR(m).
4
30 sec
The whole selection is erased.
Press it'. Playback starts in the programmed order.
• When all of the programmed tracks have been played back,
Program Playback stops, but the programmed information
remains.
• To add tracks to the end of the program, perform steps 1 to 3.
• During Program Playback, pressing _,-_1skips to the next track
of the program. Pressing I,_ returns to the beginning of the
current track.
To clear the on-screen
Press ON SCREEN.
bar and the contents
of the program
To cancel Program Playback
Press selection keys to select "PRGM", then press ENTER.
NOTE:
Program Playback is not possible depending
ell the type of disc.
Press selection
ENTER.
keys to select the desired option, then press
• Each time you press selection keys, the interval changes as
follows:
5sec_
10sec_
15sec_20sec_25sec_30sec
(Back to the beginning)
To clear the on-screen
Press ON SCREEN.
bar
NOTE:
JPEG files are played back as a slide show. It may take more time
to display an image with larger file size.
34 ENBASXC OPERATIONS
ON DVD DECK
| BasicRecording
• Turn on the unit.
• Turn on the TV and select
an input mode such as E×Tt.
ATTENTION:
It is not possible to record programs on a DVD-R/RW disc which
has already been finalized.
NOTES:
• It is recommended to format a DVD-RAM disc before use if you
use the disc on this unit for the first time. (_'_ pg. 63)
• When using a brand-new DVD-RW disc, format the disc either in
VR mode or in Video mode. (_*_pg. 63)
• Recordings made on DVD-R/RW disc must be finalized to play
back on other DVD players. Perform "Finalize A Disc" (t:_-,pg. 64).
• You can record up to 99 programs and 99 play lists on each disc.
• Some programs can only be recorded one time.
• When recording is started, an index of the first part of recording is
automatically recorded. (_ pg. 43) To delete the index, refer to
page 48.
• Recording sometimes may stop or cannot be performed even if
there is enough available capacity remaining on the disc.
CH+/-
I"
[ °
r
}
oil
Recording Mode
MPEG 2 format is used as recording format. As a guide for picture
quality, the "bps" unit is used to represent how much data can be
recorded per second. The larger this value is, the better the picture
quality becomes but more capacity is required for the recording.
Select XP or SP for programs where quick movement occurs, such
as sports programs, and LP or EP for talk shows, etc. with
relatively less movement.
The recording modes for a 4.7 GB disc are set as follows:
7
Recording mode
Recording amount
(approx.)
Maximum recording
time (approx,)
XP
10 Mbps
1 hour
SP
5 Mbps
2 hours
LP
2.5 Mbps
4 hours
EP
1.6 Mbps
o0-9
_CH+/-
ENTER
60-360
(t:_._
pg. 36)
FR
0--
_'ll
O O O
OO
1
_RECMODE
Load a recordable disc.
• For details, refer to "Placing A Disc" (_', pg. 10).
2
Press CH +/- or the number
wish to record.
keys to select the channel you
3
Press REC MODE repeatedly to select the recording mode,
then press ENTER.
• Each time you press REC MODE, the recording mode changes
as follows:
XP _ SP _ LP _EP _ FR (60-360", 420,480) _ (Back to the
beginning)
* The value is selectable from 1 to 6 hours in 5 minutes interval by
pressing <_D repeatedly after selecting "FR60-FR360 _'To change the
value in 30 minutes interval, press and hold <1_>.
• For details on the recording mode, see the right column.
4
Press • on the unit to start recording. Or while holding O, press
I_ on the remote control.
5
Press II to pause recording.
• To resume recording, press I_.
Press • to stop recording.
• It takes about 10 seconds to end the writing session when you
stop recording.
42O
48O
6 hours
1 - 6 hours
The amount varies
depending on the
selected time.
7 hours
8 hours
• For details on FR mode, refer to "Free Rate Function" (_ pg. 36).
BASIC OPERATIONS ON DVD DECK
InstantTimerRecording(ITR)
| Recording
Features
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
It is possible to set the recording time during recording. Upon
completing recording, the unit stops and shut off automatically.
1 Press • on the unit to start RetroActive Recording.
2
3
q
i
I
E. 35
I
Press • again to engage the ITR mode.
• "0:30" is displayed on the front display panel.
If you want to record for more than 30 minutes, press • to
extend the time. Each press extends recording time by
30 minutes.
Normal recording _ 0:30 _ 1:00 ... _ Maximum disc
remaining time _(Back to the beginning)
!_
NOTES:
• Perform ITR using the • button on the unit.
• The maximum recording time changes depending
remaining time.
on the disc
WatchAnotherProgramWhile RecordingOn TheUnit
While recording is going on, you can watch another program on
the TV. It does not interfere with recording.
1 Turn on the TV.
2
Select the desired channel to watch on TV using your TV's
remote control.
ElapsedRecordingTimeAndDiscRemainingTime
Indication
DISPLAYIIENIAIN
_
3
0
o
(_
o o
O0
During recording, press DISPLAY repeatedly until the desired
indication appears on the front display panel.
• Each time you press DISPLAY, the time indication changes as
follows:
Elapsed recording time _ Disc remaining time _ Clock _ (Back
to the beginning)
• You can also check the disc remaining time by pressing REMAIN
while the unit is stopped or recording is in progress. The list of
disc remaining times for all recording modes appears on the TV
screen.
36 EN BASIC
OPERATIONS ON DVD DECK
FreeRate Function
SecondAudioRecording
To record the entire program, the unit automatically sets the
appropriate recording mode depending on the combination of the
total time of the program to be recorded and either the remaining
disc space or the specified recording time (from 60 minutes to
480 minutes when using 4.7 GB blank media disc).
This unit's built-in MTS decoder enables reception of Multichannel
TV Sound broadcast. To record a SAP program received, set "2ND
AUDIO RECORD" to "ON". (_._pg. 59)
•
To record the entire program within the actual remaining
disc space
Select "FR (JUST)" in a recording mode selection procedure.
• Note that this function is available only for timer programming
recording (_._ pg. 37, 38).
•
To record the entire program by specifying the desired
recording time
Select "FR60-F R360", "FR420" or "FR480" in a recording mode
selection procedure, ff pg. 34)
•
To record a 25 min. long daily program five times just on
the same DVD disc for example
Perform "VCR Plus+ Timer Programming" (_._ pg. 37) procedure.
Be sure to set the recording mode to "FR125" and set Weekly/
Daily Rec Function to "MON-FRI" in step 6 to fit the total recording
time to the whole disc space.
A:
B:
C:
D:
i E:
When the same program
"FR125",
the 5th program
is recorded
in SP mode
cannot be recorded.
1st
2nd
3rd
4th
5th
instead
of in
B: 2nd
C: 3rd
D: 4th
E: Blank (20 rnin.)
_B_
__A:
1st
NOTES:
• You can program this unit to timer record, regardless of the disc
remaining time. If the disc remaining time is not enough, it is not
possible to record until the end of the timer program. To avoid
this, confirm the disc remaining time before setting timer
programming.
(Example) If you programmed to timer record for 60 minutes in
SP mode on a 120 minutes disc, the disc remaining time would
be 30 minutes in XP mode, 60 minutes in SP mode, 120 minutes
in LP mode, 180 minutes in EP mode, and 240 minutes in FR480
mode. Timer recording will not complete beyond these remaining
times.
• The maximum recording time of FR (JUST) mode is the same as
the recording time of FR480 mode. When timer programming a
long program in FR (JUST) mode on a disc whose remaining
time is short, it is recommended to check the disc remaining time
in FR480 mode to see if the remaining time is enough for the
program.
• Even if more than one program are timer programmed in FR
(JUST) mode, only the first one is recorded.
• In order to ensure that the recording fits on the disc, this feature
may leave a slight non-recorded section at the end of the disc.
• There may be some noise and sound disturbance at the point on
the disc where the unit switches the mode.
NOTE:
When the channel is changed on the unit;
• The "MONO" indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
• The "STEREO" indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
• Both "STEREO" and "SAP" indicators appear when a stereo
program is accompanied by SAP sound.
• Both "MONO" and "SAP" indicators appear when the main audio
on the monaural broadcast is accompanied by SAP sound.
T.[MER RECORDXNG
5
| VCRPlus+TimerProgramming
6
iijj %i_i
¸
You can program this unit to timer record as many as 8 programs.
With the VCR Plus+ system, timer programming is greatly
simplified because each TV program has a corresponding code
number which your unit is able to recognize.
You can use the remote control to enter the PlusCode number.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
• Make sure that the unit's built-in clock is set properly.
....0-9
CANCEL
........
VCRPlus+........
-- TIMERQ
.......
Selection
Keys(AV<_ _>)
ENTER
- RETURN
....
CLEAR(m)
oo88
0000
O0
1
2
Load a recordable disc.
• For details, refer to "Placing A Disc" (_'_ pg. 10).
Press VCR Plus+ to
display the "VCR Plus+
PRGM" screen.
3
•
•
•
•
•
Press the number keys
to enter the
"PLUSCODE NO." of a
program you wish to
record, then press
ENTER.
If you have made a
mistake, press CANCEL and input the correct number before
you press ENTER.
To clear all entered numbers at a time, press CLEAR(m).
If the number you entered is invalid, "PLUSCODE NO. ERROR
CONFIRM PLUSCODE NO. THEN RETRY" appears on the TV
screen. Input a valid "PLUSCODE NO.".
If "GUIDE PROGRAM IS NOT SET SELECT CHANNEL YOU
WANT TO RECORD" appears on the TV screen, set Guide
Channel numbers manually.
When "PROGRAM FULL DELETE UNWANTED TIMER
PROGRAM" appears on the TV screen, you need to cancel
some of the reserved programs.
4
The "PLUSCODE NO." you entered and the matching timer
recording information are displayed on the TV screen. Check
the program data.
• To cancel this setting, press RETURN.
IMPORTANT:
Make sure the channel position number you wish to record is
displayed. If not, see "Changing VCR Plus+ Setting" (_ pg. 62)
and set the Guide Channel number correctly.
7
EN37
Press selection keys to
select desired recording
option as required.
Press selection keys to
select the desired
setting, then press
ENTER.
• "Daily/Weekly Recording
Function" (_._ pg. 37)
• "Recording Mode"
(_ pg. 34)
• "Modify Title Name" (u pg. 46)
Press ENTER to access the Program Confirmation
screen.
Press ENTER to complete the timer programming.
• To program another timer, repeat steps 2 - 8.
• If "PROGRAM OVERLAPPED" appears on the TV screen, see
"When Programs Overlap Each Other" (_ pg. 41).
Press TIMERQ to engage the unit's timer mode.
• The unit turns off automatically and (_) appears on the front
display panel.
• To disengage the timer mode, press TIMER(]) again.
IMPORTANT:
If you have moved to a different area or if a broadcasting
station's channel number has been changed, the wrong channel
number will be displayed on the VCR Plus+ program screen in
step 4. When this happens, set the correct Guide Channel
number for that station.
• There may be cases that the "VCR Plus+ Timer Programming"
function prolongs the stop time of the programming.
• When two successive programs are recorded with the "VCR
Plus+ Timer Programming" function, the ending of the first
program or the beginning of the second program may not be
recorded.
• If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
Daily/Weekly Recording Function
You can record programs with one of the following weekly/daily
timer settings.
WEEKLY
Select to record a weekly program.
MON-FRI
Select to record a daily program from Monday
through Friday.
MON-SAT
Select to record a daily program from Monday
through Saturday.
SUN-SAT
Select to record a daily program from Sunday
through Saturday.
38 EN TIMER
RECORDING
| ManualTimerProgramming
........
6
Press selection keys to set the desired stop time ("STOP"),
then press D.
• Each press of/', v increases/decreases
the stop time in
1 minute interval.
• To increase/decrease the stop time in 30 minutes interval,
press and hold _.v.
iii'¸ _
You can program this unit to timer record as many as 8 programs
up to 30 days in advance. If you do not know the PlusCode number
for the program you wish to record, use the following procedure to
set your unit to timer record the program.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
• Make sure that the unit's built-in clock is set properly.
7
Press selection
press L>.
keys to set the desired channel ("CH"), then
8
Set the other recording options as required.
• Refer to step 6 in "VCR Plus+ Timer Programming"
9
Press ENTER to access the Program Confirmation
(_._.pg. 37).
screen.
1 0 Press ENTER to complete the timer programming.
• To program another timer, repeat steps 2 - 10.
1 1 Press TIMER(]) to engage the unit's timer mode.
• The unit turns off automatically and Q appears on the front
display panel.
• To disengage the timer mode, press TIMERQ again.
-TIMERQ
_PROG
NOTES:
• When two successive programs are recorded with the "Manual
Timer Programming" function, the ending of the first program or
the beginning of the second program may not be recorded.
• If the copy limited program is received during timer recording, the
unit enters Record Pause mode. Recording starts again if it is
switched to a recordable broadcast during the time you
programmed.
--SelectionKeys(AV_ _)
ENTER
oo88
0000
O0
1
Load a recordable disc.
• For details, refer to "Placing A Disc" (_'_ pg. 10).
2
Press PROG to display _,_.M_#E#
the "PROGRAM
CHECK" screen.
• When "PROGRAM FULL
DELETE UNWANTED
TIMER PROGRAM"
appears on the TV
screen, you need to
cancel some of the
reserved programs.
3
Press selection keys
repeatedly to select
"NEW TIMER
PROGRAM",
ENTER.
4
then press
Press selection keys to
set the desired date
("DATE"), then press b>.
5
Press selection keys to
set the desired start time
("START"), then press b>.
• Each press of/', V increases/decreases
the start time in
1 minute interval.
• To increase/decrease the start time in 30 minutes interval,
press and hold _.v.
Cable Box or DBS Receiver Users
To record a satellite broadcast using Manual Timer
Programming:
[] Perform Manual Timer Programming.
• Set the channel to the external input ("L-1" or "F-1 ")
connected to the cable box or DBS receiver.
[] Set the cable box or DBS receiver to the appropriate channel
for recording.
• Leave the cable box or DBS receiver's power on.
T.[MER RECORDXNG
| On-DiscTimerProgramming
EN39
To Make The DiscForOn-DiscTimerProgramming
1 Press PROG to access
the Program Check
screen.
On-Disc Timer Programming is a function used with discs that are
especially intended for a specific program. The disc is then
programmed for a program you always watch every day or every
week. Since older programs are automatically overwritten, a single
disc can be used without worrying about how much recording
capacity remains. You can program each disc to timer record as
many as 8 programs up to 30 days in advance.
2
• Make sure that the unit's built-in clock is set properly.
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD-RAM or DVD-RW (VR mode) disc for
programming.
Press selection keys to
select "DISC TIMER
PRGM", then press
ENTER.
• When some programs
are recorded on the disc,
a caution message
appears. To backup the recorded programs, press ENTER, and
perform dubbing to other devices.
• When On-Disc Timer Programming has already been made on
the disc, press selection keys to select "NEW TIMER
PROGRAM", then press ENTER.
3
ATTENTION:
• On-Disc Timer Programming is possible only with the disc for
On-Disc Timer Programming.
• If data is recorded on a disc for On-Disc Timer Programming
using a unit from another manufacturer, On-Disc Timer
Programming may not function properly.
4
Press selection keys to
set the desired date
("DATE"), then press D.
Press selection keys to
set the desired start time
("START"), then press _>.
• Each press of _,v
increases/decreases
the
start time in 1-minute
interval.
• To increase/decrease the start time in 30-minutes
press and hold _,v.
Press selection keys to set the desired stop time ("STOP"),
then press L>.
• Each press of/_v
increases/decreases
the stop time in 1minute interval.
• To increase/decrease the stop time in 30-minutes interval,
press and hold _,v.
= DVDO/I
Press selection
press L>.
PROG
-7
orSeleclio. Keys(AV<_)
ENTER
0000
O0
interval,
keys to set the desired channel ("CH"), then
Press selection keys to set "DAILY/WEEKLY', then press L>.
• For details on "DAILY/WEEKLY" setting, refer to "Daily/Weekly
Recording Function" (t:_ pg. 37).
Set the other recording
options as required.
• "Recording Mode"
(_ pg. 34)
• "Modify Title Name"
(_ pg. 46)
Press ENTER to access
the Program
Confirmation
10 Press
screen.
ENTER to
complete the timer programming.
• To program another timer using "To Make The Disc For OnDisc Timer Programming", repeat steps 1 - 10.
1 1 Press DVD (b/I to turn off the power.
• _D_sc(_ is displayed on the front display panel.
• To disengage the timer mode, press DVD (b/] again.
Cable Box or DBS Receiver Users
To timer record a satellite broadcast using On-Disc Timer
Programming:
[] Perform On-Disc Timer Programming.
• Set the channel to the external input ("L-1" or "F-1 ")
connected to the cable box or DBS receiver.
[] Set the cable box or DBS receiver to the appropriate channel
for recording.
• Leave the cable box or DBS receiver's power on.
40 EN TIMER
RECORDING
To Timer RecordTheProgramWith The Programmed
Disc
1
Load a programmed
disc.
How DiscsAre Overwritten
(Example 1)
To record a 1 hour serial drama every Friday in SP mode
2
Press DVD ©/I to turn off the power.
• _(_)
appears on the front display panel, and the unit enters
into timer standby mode.
• To disengage the timer mode, press DVD ©/I again.
NOTES"
• On-Disc Timer Programming is not possible on a DVD-R or
DVD-RW (Video mode) disc.
• The information of a program recorded with On-Disc Timer
Programming is not stored in the library.
• The play list is not created for the programs recorded with OnDisc Timer Programming.
• Programs recorded with On-Disc Timer Programming cannot be
edited or protected.
• On-Disc Timer Programmed discs cannot be used for other
recordings other than On-Disc Timer Programming.
• On-Disc Timer Programmed discs cannot be used on units from
other manufacturers.
• The beginning of a program may not be recorded. In addition, if
the 1st program's recording stop time and the 2nd program's
recording start time is the same, the ending of the 1st program
may not be recorded.
• If there is a power outage while recording, the recordings when
the power outage occurs are not guaranteed.
iiiiiiii;_
!iiiii/H!iIL
/
Blank ij
i!ii';i_i_i_i_!iiiiiiiii!_;
i
\
\
:11
The first program is
overwritten by the third,
The second program is
overwritten by the
fourth.
(Example 2)
To record a 15 minutes serial drama every morning in XP
mode
(Example 3)
To record a 90 minutes serial drama every Sunday in SP
mode
\
i B ank
J
NOTE:
On-Disc Timer Programming
examples.
may not always work as these
TIMER RECORDXN5
IICheck,
Cancel
AndChange
Programs
EN41
WhenProgramsOverlapEachOther
If "PROG RAM OVERLAPPED" appears, you have another
program overlapping the program you have just made. Press
PROG. Program Check screen appears and conflicting programs
will be highlighted in pink.
Example: Program 3 (you
have just made) and
Program 4 overlap each
other.
......
DVD_/I
1 Confirm the overlapping
programs.
TIMERQ
RECLINK
....Selection
Keys(AV_
ENTER
C_
_>)
r_
CLEAR(m)
OOO0
O0
1 Disengage the timer mode.
• When =D_sc(_ lights up on the front display panel, press DVD
©/t
• When (_) lights up on the front display panel, press TIMERQ,
and press DVD ©/[ after (_ lights off.
• When "R-LK" lights up on the front display panel, press
REC LINK.
2
Press RROG to access the Program Check screen.
• To return to the previous screen after you check the program,
press PROG again.
To cancel the program
• Press selection keys to select a program to be canceled, then
press CANCEL.
3
4
Press selection
press ENTER.
keys to select a program to be changed, then
Change the settings of the desired recording options as
required.
• Refer to steps 4 - 10 in "Manual Timer Programming"
(_ pg. 38).
•5 Press RROG to exit the program screen.
6
Set the unit to timer standby mode.
For VCR Plus+ or Manual Timer Programming
• Press TIMERQ so that (]) lights up on the front display panel.
For On-Disc Timer Programming
• Press DVD ©/I so that _s£(_) lights up ell the front display
panel.
For Automatic Satellite Program Recording
• Press REC LINK for 2 or more seconds.
NOTES:
• If you do not mind this
overlap, press PROG to
finish the timer program
setting.
• Recording is performed according to the order as displayed on
the Program Check screen. The timer program that follows will
not be performed correctly.
• If no changes are made for approximately 1 minute, the unit will
automatically return to the normal screen.
To cancel the program
Press selection keys to select a program to be canceled, then
press CLEAR(N).
• 'q-HE TIMER PROGRAMING SETTING WAS CANCELLED"
appears on the TV screen for about 5 seconds, then the normal
screen resumes.
To change the program
Press selection keys to select a program to be changed, then
press ENTER.
• Change each setting as required.
Press ENTER to exit the Program screen.
3
Press TIMER(])
to enter into timer standby mode.
NOTE:
When any overlaps remain after deletion and modification of
programs, Program Overlap list remains showing the conflicting
programs. In such a case, repeat the procedure above until the
conflict is solved.
42 EN T.[HER RECORDXNG
| Automatic
SatelliteProgram
Recording
This function allows you to automatically record a satellite program
which is timer programmed on your external DBS receiver.
Connect a DBS receiver to the unit's [S-VIDEO/VIDEO/AUDIO
INPUT L-l] connectors and program the timer on the DBS
receiver. The unit starts or stops recording by the signals input
from the DBS receiver. After recording, the unit's power shuts off
automatically.
ATTENTION:
• Be sure not to turn on the DBS receiver before the program is
executed. Otherwise, the unit will start recording when the DBS
receiver's power is turned on.
• If you have connected another appliance other than a DBS
receiver to the [S-VIDEO/VIDEO/AUDIO
INPUT L-l]
connectors, be sure not to engage the Automatic Satellite
Program Recording mode. Otherwise, the unit will start
recording when the connected appliance's power is turned on.
• Automatic Satellite Program Recording and timer recording
cannot be done at the same time.
RECLINK
ooST
RECMODE
©000
O0
If
[S-VlDEONIDEO/AUDIO
INPUT L-l] connectors.
Make surethe
the
DBSonreceiver
connected to the unit's
Program
timer
the DBSis receiver.
1 Press REC MODE repeatedly to set the recording mode.
2
Press and hold REC LINK for about 2 seconds to engage the
Automatic Satellite Program Recording mode. "_" and "R-LK"
light up on the front display panel.
NOTES:
• To disengage the Automatic Satellite Program Recording mode,
press REC LINK.
• If the unit's power is off, it is not possible to engage the Automatic
Satellite Program Recording mode.
• In step 2, if "_," blinks quickly on the front display panel even
though your DBS receiver's power is off, Automatic Satellite
Program Recording will not work properly with that DBS
receiver*. If this is the case, perform "Manual Timer
Programming" (_*_pg. 38) to timer record a satellite program.
* Some DBS receivers output signals even if the power is off. Automatic
Satellite Program Recording is not possible with those DBS receivers.
• "_" blinks on the front display panel while Automatic Satellite
Program Recording is in progress.
• For timer programming of the DBS receiver, refer to the
instruction manual of the DBS receiver.
• Automatic Satellite Program Recording is not possible if your
DBS receiver does not have a timer.
• Pressing the unit's (b/I button while Automatic Satellite Program
Recording is in progress turns off the unit's power and
disengages the Automatic Satellite Program Recording mode.
• If there are more than one satellite programs you wish to record
with Automatic Satellite Program Recording, it is not possible to
set different recording modes for each program.
• Depending on the type of DBS receiver, the unit may not record a
slight portion of the beginning of the program or may record
slightly longer than the actual length of the program.
• If you engage the Automatic Satellite Program Recording mode
when the DBS receiver's power is on, the unit will not start
Automatic Satellite Program Recording even though "_" blinks on
the front display panel. When the DBS receiver shuts off once
and is turned back on again, the unit starts recording.
• You can also record a program from your cable system in the
same way if the system has a timer.
• When the Automatic Satellite Program Recording mode is
engaged, or the unit's power is turned off after Automatic Satellite
Program Recording is finished, the unit will not enter the timer
mode even though "AUTO TIMER" is set to "ON" (_._ pg. 60).
NAVIGATION
| LibraryDatabaseNavigation
!iii
¸ __
The Library Database Navigation enables you to search and select
the desired titles recorded very easily.
You can record up to 99 titles on a disc.
Each time a title is recorded, the information of the title is
registered for the Library Database Navigation automatically.
So, you can confirm the information of the titles recorded with the
Library Database Navigation screen. And, you can also select one
of the titles recorded using the Library Database Navigation.
The following screen appears as the Library Database Navigation
screen when you press NAVIGATION. You can move the arrow to
select the desired position on the screen by pressing the selection
keys on the remote control.
EN43
Using Library Database Navigation system, you can easily modify
registered information, edit the title or play list, as well as search
for the beginning of each title.
About registration of information
The following information is automatically registered for each title
when ordinary recording or timer recording is performed, then
stored in an area specified on the unit.
• index* (reduced pictures to show program titles)
• program title*
• category*
• date and time
• channel
• recording mode
• length of recording time
The items marked with an asterisk (*) can be easily modified and
registered again after recording by using Library Database
Navigation system.
The limitations
of registration
You can register information up to 99 programs in a single DVD.
When the amount of information is at the limits of registration, you
cannot record new titles any more. In this case, you need to delete
old titles to register new ones. (_:*_pg. 44)
NOTES:
• Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. As only display
for library appears, press TOP MENU to display the following
screen to select the desired title.
[]
[]
[]
[]
[]
[]
[]
[]
INDEX
(Thumbnail of each program)
Menu index
ORIGINAL (t:,_ pg. 44)
PLAY LIST (_ pg. 47)
LIBRARY (_ pg. 51)
Remaining time
(Based on the recording speed currently selected)
Current/Total number of program(s)
Icons
Recording information for the program indicated by the arrow
Guidance for operations
Operational commands
The Icons and their meanings
This program is write-protected.
[]
This program has stereo sounds.
This program was recorded with timer
recording.
• Sound of received channel may be interrupted while the Library
Database Navigation screen is displayed.
• You cannot perform timer recording during editing of thumbnail
images or play lists by pressing NAVIGATION. Press
NAVIGATION to clear the editing screen before performing timer
recording.
44 ENNA VZGATZON
| BasicOperationOf OriginalInformation
You can scan the beginning of the title easily and play back with
the Library Database Navigation.
ProtectTitle (DVD-RAM& DVD-RW(VR mode)only)
You can protect titles to prevent accidental erasure of the
important titles.
1 Press NAVIGATION
screen.
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD disc to play back.
Press selection
ENTER.
keys to select "ORIGINAL",
then press
3
Press selection keys to select a title you want to protect, then
press V.
4
Press selection keys to select "PROTECT", then press
ENTER.
• " : ' " appears on the TV screen.
• To cancel the protection, select "PROTECT" again, then press
ENTER.
Press NAVIGATION
to return to the normal screen.
NOTE:
All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles. (_._ pg. 63)
MEMO
=,,NAVIGATION
Selection
Keys(/',V<_ _)
ENTER
DeleteTitle
You cannot record any more with Library Database Navigation
once the registered titles on the disc reach 99 titles. Deleting
unnecessary titles after dubbing or other operations can increase
remaining time and available recording capacity. (For DVD-R
discs, although it is possible to delete recorded titles, available
recording capacity does not increase.) The deleted title cannot be
retrieved. Play lists and title information in the unit's library are also
deleted.
=•
,,CLEAR/==
0000
to display the Library Database Navigation
O0
1 Press
NAVIGATION
to display the Library Database Navigation
screen.
Play BackTitle
1 Press NAVIGATION to
display
the
Library
Database
Navigation
screen.
2
Press selection keys to select "ORIGINAL",
ENTER.
3
Press selection keys to
select the index (small
pictures) of the desired
title, then press ENTER
or •.
then press
• With the arrow on
_ldE _0'_l[_......................
'-'
.................
_"-'
"_"-I_tff_R_
"ORIGINAL", all titles will 28/07/03M0_;
_0:00-_I:0QCH7SP 60rr,
m []
be played back
according to the index
order when • is pressed.
• All subsequent titles after
the selected index will be played back in order.
• The unit stops when playback ends, and resumes to a
broadcast receiving screen.
• Press • to stop playback. If "RESUME" is set to "ON" or "DISC
RESUME" (_*_pg. 60), playback starts from the point where
playback was previously stopped when • is pressed.
• When you want multiple titles to be played back in a determined
order, press selection keys to select the desired title, then
press MEMO. The numbers of the playback order appear on
the index. (Up to 30 titles.)
• When you want to correct the order, move the arrow to the
desired index and press MEMO. The number disappears and
the unit re-numbers the other titles automatically.
• When you want to cancel the order, press CLEAR(•).
2
Press selection
ENTER.
keys to select "ORIGINAL",
3
Press selection
press v.
keys to select a title you want to delete, then
4
then press
Press selection keys to select "DELETE", then press ENTER.
• The confirmation screen appears.
Press selection keys to select "YES", then press ENTER.
• To cancel the deletion, select "NO", then press ENTER.
Press NAVIGATION to return to the normal screen.
NAVIGATION
DeleteUnwantedPart Of TheTitle
(DVD-RAM& DVD-RW(VRmode)only)
You can delete unwanted part of a title.
1 Press NAVIGATION to
display the Library
Database Navigation
screen.
2
Press selection keys to
select "ORIGINAL",
press ENTER.
then
_1i_1_'_11_,_
28/07/03M0_
3
Press selection keys to
select a title whose
unwanted part you want
to delete, then press V.
4
Press selection
5
Press I_ to start
10:00-41:00
keys to select "EDITING",
CH7SP
60rain
[]
then press ENTER.
playback.
• Press 44 or I_ to find
the point where you want
the deletion to begin,
then press II.
6 Confirm the arrow is on
"IN", then press ENTER.
• The edit-in time is
displayed on the left of
the "IN" window.
7
Press I_ to resume playback.
• Press || to pause at the point where you want the deletion to
end.
8
Confirm the arrow is on "OUT", then press ENTER.
• The edit-out time is displayed on the left of the "OUT" window.
9
Press selection keys to select"PREVlEW",
to preview the edited title.
To modify the points
[] Press selection keys
• Press selection keys
to return to the screen
[] Press selection keys
[] Perform steps 5 - 9.
to
to
in
to
then press ENTER
select "CLEAR", then press ENTER.
select "RETURN", then press ENTER
step 4.
select "IN".
1 O Press selection keys to select "EXECUTE",
ENTER.
• The confirmation screen appears.
then press
1 1 Press selection keys to select"YES", then press ENTER.
• When you cancel the deletion, select "NO", then press
ENTER.
1 2 Press NAVIGATION to return to the normal screen.
NOTES:
• There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
• Available recording capacity may not match the deleted part after
deletion.
EN45
46 ENNA VZGATZON
Modify TitleName
| EditOriginalInformation
1 Perform steps 1 - 4 of "Modify Index" (_ pg. 46) before
continuing.
2
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD disc to modify.
3
ATTENTION:
• It is not possible to modify discs recorded on DVD units from
other manufacturers.
• You cannot perform timer recording during editing of index by
pressing NAVIGATION. Press NAVIGATION to clear the
editing screen before performing timer recording.
Press selection keys to
select "MODIFY NAME",
then press ENTER.
Input a new title name.
• Press selection keys to
select the desired letter
or symbol, then press
ENTER.
• To erase the letter, press
selection keys to select
"DELETE" or "DELETE ALL", then press ENTER.
• You can enter up to 64 letters.
• You can also use the number keys on the remote control to
input the letters. For example, pressing number key "2"
repeatedly changes the letter in the order of "A", "B", "C", "a',
"b', "c" and "2". The following buttons can also be used.
Number keys: To input alphabet, numbers and space.
<1_>buttons: To move the input position and insertion point.
• button: To correct the letters.
i<</_,-I_l buttons: To switch the character table.
= O-9/A-Z
4
Press selection keys to select "SAVE", then press ENTER.
• The new title name is registered.
-- NAVIGATION
5
- Selection
Keys(AV<_ D)
ENTER
Press selection keys to select "RETURN", then press ENTER.
• Return to the Library Database Navigation screen to confirm
the modified name.
6
-- IP-l_
O0
1
Perform steps 1 - 4 of "Modify Index" (= pg. 46) before
continuing.
2
Press selection keys to
select "MODIFY
CATEGORY", then
press ENTER.
3
Press selection keys to
select the desired
category, then press
ENTER.
Modify Index
1
Press NAVIGATION to display the Library Database Navigation
screen.
2
Press selection keys to select "ORIGINAL",
ENTER.
3
Press selection keys to select a title you want to modify, then
4
press V.
Press selection keys to select "MODIFY", then press ENTER.
Press selection keys to select "MODIFY
ENTER.
6
then press
INDEX", then press
Press I_ to start
playback. Press _
or
_,-_,-to search for the
picture from the title,
then press II.
7
Confirm the arrow is on
"REPLACE", then press
ENTER.
• The new index appears
on the right window.
8
9
_
_8/07/03M0#_ 10:00-11:00
IOTHERS]
CHZSP
60ram
Confirm the arrow is on "RETURN", then press ENTER.
• You can confirm the new index.
Press NAVIGATION
to return to the normal screen.
Modify Category
0000
5
Press NAVIGATION
to return to the normal screen.
[]
4
_PP_
i o_rH_ ;_
Press selection keys to
select "RETURN", then
press ENTER.
• Return to the Library Database Navigation screen to confirm
the modified category.
5 Press NAVIGATION to return to the normal screen.
NAVIGATION
Confirm the arrow is on
"IN", then press ENTER.
• The editdn time is
I Information
Basic
Operation
Of PlayList
displayed on the left of
the "IN" window.
6
i_+_+/_
i__+_ ....++_+_
+i_'
+++%
_+'_
+.,,,
_ +_i_
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD disc to modify.
Press I_ to resume
playback.
• Press II topause atthe
point where you want the
created play list to end.
8i_ _,i_
Play List
It is a collection of the scenes. A play list can be freely edited and
played back without ever changing any original recording data.
Using the random access of a disc (which allows video data to be
instantly read no matter where it is on the disc), a play list includes
information such as the timer counter for the playback start point
and end point, indexes for checking the contents of recorded data,
category information, and more. Playback according to a play list
you have created allows you to enjoy various combinations of
video images from a single title.
_'rurmj _
EXECUrEJ
7
Confirm the arrow is on "OUT", then press ENTER.
• The edit-out time is displayed on the left of the "OUT" window.
• The edit-out point must come after the edit-in point.
8
Press selection keys to select"PREVlEW",
to preview the play list.
• To cancel play list creation, press selection
"RETURN", then press ENTER.
then press ENTER
keys to select
To modify the points
Press selection keys to select "CLEAR", then press ENTER.
[] Press selection keys to select "IN".
[] Repeat steps 3 - 8.
9
ATI"ENTION:
It is not possible to modify discs recorded on DVD units from
other manufacturers.
EN47
Press selection keys to select "EXECUTE",
ENTER. The play list is created.
1 0 Press NAVIGATION
then press
to return to the normal screen.
NOTES:
• There may be a discrepancy of several seconds between the
scene you intend to edit, and the scene which is actually edited.
• The title, index and category of the play list can be modified in the
same way as "ORIGINAL". (_ pg. 46)
• You can modify the play list that has just been created here by
adding, moving, or deleting unwanted parts to create a digest
edition, etc.
Play BackPlay List
+ NAVIGATION
+ Selection
Keys(_V<_ [_)
ENTER
1
Press NAVIGATION
screen.
2
Press selection
ENTER.
to display the Library Database Navigation
keys to select "PLAY LIST", then press
3
414
Press selection keys to select a play list to be played back,
then press ENTER.
• The unit stops when playback ends, and resumes to a
broadcast receiving screen.
• When you want the multiple play lists to be played back
continuously, press MEMO after selecting the desired play lists.
The numbers of the playback order appear on the index. (Up to
30 titles)
.....I)-l_
+++11
-_-o 6 8
O00Q
OO
DeletePlay List
CreatePlay List
1
Press NAVIGATION
to
display the Library
Database Navigation
screen.
2
3
4
Press selection keys to
select "PLAY LI ST", then
press ENTER.
Press selection keys to
select "CREATE", then
press ENTER.
Press It, to start playback.
• To move to other titles, press 144 or _),-I.
• Press 44 or I_ to find the point where you want the created
play list to begin, then press II.
1
Press NAVIGATION
screen.
2
Press selection
ENTER.
3
Press selection keys to
select a play list you
want to delete, then
press v.
4
Press selection keys to
select "DELETE", then
press ENTER.
• The confirmation screen
to display the Library Database Navigation
keys to select "PLAY LIST", then press
_
_mTmGJ
appears.
Press selection keys to
select "YES", then press ENTER.
• To cancel the deletion, select "NO", then press ENTER.
6 Press NAVIGATION to return to the normal screen.
48 ENNA VZGATZON
Modify Play ListName
| EditPlayListInformation
1 Perform steps 1 - 4 of "Modify Index" (_ pg. 48) before
continuing.
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD disc to modify.
ATTENTION:
It is not possible to modify discs recorded on DVD units from
other manufacturers.
2
Press selection
ENTER.
keys to select "MODIFY NAME", then press
3
Input a new title name.
See "Modify Title Name"
(_ pg. 46).
4
Press selection keys to
select "SAVE", then
press ENTER.
Press selection keys to
select "RETURN", then
press ENTER.
• Return to the Library
Database Navigation screen to confirm the modified name.
Press NAVIGATION
to return to the normal screen.
Modify Category
1 Perform steps 1 - 4 of "Modify Index" (_ pg. 48) before
continuing.
2
Press selection keys to select "MODIFY CATEGORY",
press ENTER.
3
Press selection keys to
select the desired
category, then press
ENTER.
= NAVIGATION
= Selection
Keys(/',V<_ D)
ENTER
I_1<1.
4
<1<
Press selection keys to
select "RETURN", then
press ENTER.
• Return to the Library
Database Navigation
screen to confirm the
........
II
oo68
0000
O0
modified category.
Press NAVIGATION
Modify Index
1 Press NAVIGATION to
display
the
Library
Database
Navigation
screen.
2
Press selection keys to select "PLAY LIST", then press
ENTER.
3
Press selection keys to select a play list you want to modify,
then press V.
4
Press selection keys to
select "MODI FY", then
press ENTER.
Press selection keys to
select "MODIFY INDEX",
then press ENTER.
Press I_ to start
I
playback. Press << or
_,-I,_to search for the
picture from the title,
then press II.
Confirm the arrow is on
"REPLACE", then press
ENTER.
• The new index appears
on the right window.
8 Confirm the arrow is on
"RETURN", then press
ENTER.
• You can confirm the new
index.
Press NAVIGATION
to return to the normal screen.
@_PrN_:I
to return to the normal screen.
then
NAVIGATION
DeleteScenes
1
Press NAVIGATION
Press selection
to
Press NAVIGATION to
display the Library
Database Navigation
screen.
2
keys to
select "PLAY LIST", then
press ENTER.
3
Press
select
which
delete
4
Press selection
5
Press selection keys to
select "DELETE
SCENE", then press
ENTER.
6
Press • to start
_#l_'_'¢£f_;[,z
28/07/03MON
10:00-11:00
CH7SP
60ram
3
selection keys to
a play list from
you wish to to
unwanted scenes, then press V.
keys to select "EDITING",
then press ENTER.
8
Press • to resume playback.
• Press II to pause at the point where you want the deletion to
end.
9
Confirm the arrow is on "OUT", then press ENTER.
• The edit-out time is displayed on the left of the "OUT" window.
4
Press selection keys to select "EDITING", then press ENTER.
5
Press selection keys to
select "MOVE SCENE",
then press ENTER.
"IN", then press ENTER.
• The edit-in time is displayed on the left of the "IN" window.
8
Press • to resume playback.
• Press II to pause at the point where you want the moved
scene to end.
Confirm the arrow is on "OUT", then press ENTER.
• The edit-out time is displayed on the left of the "OUT" window.
10
D£L:_¢_Y_TE
S_EN_
11
RE_0m_J
_
EXECU_EJ
modify the points
Press selection keys to select "CLEAR", then press ENTER.
Press selection keys to select "IN".
Perform steps 6 - 10.
1 1 Press selection
ENTER.
CH7SP
Press selection keys to
select a play list which
you wish to move a
scene, then press v.
to select "PREVIEW",
To
[]
[]
[]
10:00-11:00
Press • to start
playback.
• Press 44 or _
to find
the point where you want
the moved scene to
begin, then press II.
1 Confirm the arrow is on
Confirm the arrow is on "IN", then press ENTER.
• The edit-in time is displayed on the left of the "IN" window.
preview
then
press
of the
ENTER.
scene A
approximately
5 seconds before and
after the deleted part is
played back.
• TO cancel the deletion,
press selection keys
to select "RETURN",
then press ENTER.
28/07/03 M0N
6
7
Press selection keys
Press selection keys to
select "PLAY LIST', then
press ENTER.
'_"..............
'"_"'"'I'_ifa_] _
playback.
• Press 44 or _
to find
the point where you want
the deletion to begin,
then press II.
10
49
Move Scenes
display the Library
Database Navigation
screen.
2
EN
keys to select"EXECUTE",
then press
1 2 Press NAVIGATION to return to the normal screen.
Press • to start playback.
• Find the point where you want the moved scene to be moved,
then press II.
Confirm the arrow is on "MOVE TO", then press ENTER.
1 2 Press selection keys to select "PREVIEW", then press
ENTER. A preview of approximately 5 seconds before and
after the point to which the scene has been moved is played
back.
• To cancel the moving, press selection keys to select
"RETURN", then press ENTER.
To
[]
[]
[]
modify the points
Press selection keys to select "CLEAR", then press ENTER.
Press selection keys to select "IN".
Perform steps 6 - 12.
1 3 Press selection
ENTER.
14
keys to select "EXECUTE",
Press NAVIGATION
then press
to return to the normal screen.
50 ENNAVIGATION
Addscenes
1 Press NAVIGATION
to display the Library Database Navigation
screen.
2
Press selection keys to
se{ect "PLAY LIST", then
press ENTER.
3
Press selection keys to
select a play list to which
you wish to add a scene,
then press v.
4
Press selection keys to
select "EDITING", then
press ENTER.
5 Press selection keys to
select "ADD SCENE",
then press ENTER.
6
Press It, to start
playback.
:
• To move to other titles ..............
press _-,=,<or _,-_L
• Press 44 or _
to find
the point where you want
the created play list to
begin, then press II.
7
Perform steps 5 - 10 of "Create Play List" (_ pg. 47).
NAVIGATION
Each disc recorded on this unit is automatically numbered. If this
number is retained, it is possible to find out the titles recorded in a
disc quickly.
Title information can be registered in the unit's memory for up to
1300 titles.
1
Press NAVIGATION
screen.
2
Press selection keys to
select "LIBRARY", then
press ENTER.
......
Selection
Keys(AV< _)
ENTER
-6-o 8 G
0000
O0
to display the Library Database Navigation
3
Select the appropriate
sort button to sort the
information, then press
ENTER.
"DISC No.":
Sort by disc number.
"CATEGORY":
Sort by category.
"DATE":
Sort by date.
"NAME":
Sort by name.
• Each time when the sort button is selected and ENTER is
pressed, the sorting order switches between ascending order
and descending order.
4
Press selection keys to select the desired title, then press
ENTER.
• If the disc loaded on this unit contains the selected title, the
selected title and all subsequent titles will be played back.
NOTE:
If you do not want the information to be registered in the library
automatically, set "SAVE AS LIBRARY" to "OFF". (_._pg. 59)
'" NAVIGATION
51
ScanForTitle FromLibrary
I EditLibraryInformation
J o Turn on the TV and select an input mode such as EXT1.
EN
II
When the disc that contains the selected title is not loaded
A prompt screen appears. Load the disc after pressing ENTER to
close the prompt screen.
Then perform steps 1 - 4.
NOTE:
If a disc registered in the library is recorded or modified on DVD
units from other manufacturers, it may become impossible to
operate properly.
RegisterDisc
When a disc that is not recorded on this unit or not registered in the
library is loaded, a message appears confirming if the disc should
be registered. If registering, perform the following procedure.
1 Press NAVIGATION
screen.
to display the Library Database Navigation
Press selection keys to select "LIBRARY".
• The registration confirmation screen appears.
3
Press selection keys to select "REGISTER", then press
ENTER.
• To quit registration, select "CANCEL", then press ENTER.
4 Press NAVIGATION to return to the normal screen.
NOTES:
• It is not possible to register discs used for On-Disc Timer
Programming. (_'_ pg. 39)
• It is not possible to register discs formatted on devices other than
JVC's DVD recorders.
• It is not possible to register discs recorded on devices other than
JVC's DVD recorders.
DeleteInformation
1
Perform steps 1 - 3 of "Scan For Title From Library" (t:_._pg. 51)
before continuing.
Press selection keys to select a title whose information you
want to delete, then press V.
3
4
Press selection keys to select "DELETE", then press ENTER.
• The confirmation screen appears.
Press selection keys to select "DELETE", then press ENTER.
• To cancel the information deletion, select "CANCEL", then
press ENTER.
5 Press NAVIGATION to return to the normal screen.
52 ENNA VT_GATXON
II Playback
WithMP3/JPEGNavigation
LocatingThe DesiredGroupAndTracks
1 Lead a disc.
2
3
This unit can play back discs that MP3 sound files and JPEG
image files taken with digital still cameras or other devices are
recorded.
The MP3/JPEG Navigation enables you to search and select the
desired files recorded on CD-R/RW or CD-ROM discs very easily.
I o Turn on the TV and select an input mode such as EXT1.
4
Press NAVIGATION.
Press selection keys to select "MP3" or "JPEG", then press
ENTER.
Press selection keys to select the desired group, then press
ENTER.
• A list of files in the selected group appears.
Press selection keys to select a file you want to play back,
then press ENTER. The unit starts playback from the selected
file.
• Playback stops when all the files in the selected group are
played back.
NOTES:
• If you press • instead of ENTER ill step 4, the unit starts
playback from the first file of the group.
• JPEG files are played back as a slide show at the set intervals.
(_ pg. 33)
• If a file name includes any 2 byte character, the unit may not
show the file name correctly.
• The order of the groups and items shown in steps 4 and 5 may
differ from the order shown on your PC.
• When you want the multiple files to be played back continuously,
press MEMO instead of ENTER in step 5. Playbacks in the
specified order when • is pressed. (Up to 30 titles)
• If you have specified a wrong selection, press CANCEL.
Or press CLEAR(==), all the title numbers are erased.
After all the files are played back
[] Perform steps 1 - 4.
[] Press CLEAR(==).
• The title numbers are reset and erased.
[] Press NAVIGATION to return to the normal screen.
[]
[]
[]
r_
[]
[]
[]
[]
[]
[]
Name of the inserted disc
Sort buttons ("MP3"/"JPEG")
Selected group number/total number of groups on the disc
Group name
Return button
Group name/Created date
File type indicator
_
: MP3
: JPEG
Selected file
Selected file number/total number of files in the group that
contains the selected file
Program number/file name
EDITING
| DVDubbing
1 Connect a camcorder or DV equipment to the [DV IN]
connector on the unit's front panel.
2 Press CH +/- to set the channel to "DV".
You can dub programs from a camcorder or DV equipment
connected to the unit with a DV cable. The unit's remote control
allows you the limited control of the connected camcorder or DV
equipment functions during dubbing.
3
NOTES:
• Use the DV cable VC-VDV 204U for connection.
• When you connect a PC to the [DV IN] connector,
assure the normal operation of this unit.
F
53
• The on-screen display for DV dubbing appears.
Press REC MODE repeatedly to set the recording mode.
4
Locate the point from where you want to start dubbing, then
stop or pause playback by pressing the following buttons on the
remote control: I_, I,_,_, <_1, •, II.
• To play back in slow speed (1/10 of the normal speed), press I I
to pause playback, then press _
or IHb.
• TO play back frame-by-frame, press II to pause playback, then
press II repeatedly. Each press of II advances a frame.
• To change the playback direction, press <1< or IH.,-.
5
Press selection keys to select _,
1, then press ENTER
repeatedly until the desired sound track appears on the TV
screen.
we do not
Yourunit
EN
AUDIO1:
7
Select this to record the original stereo sound played back on
the connected DV equipment.
AUDIO2:
Select this to record the dubbed stereo sound played back on
the connected DV equipment.
MIX:
Select this to record the sound of both "AUDIO 1" and "AUDIO
2".
• Note that this selection is not available when the source
program is recorded in 16BIT (48 kHz) mode.
To[DrINl_
q
Camcorder
DVcable
|
(VC-VDV
204U)I
6
DV connector
DV equipment
Press selection keys to select
m,,÷O,
then press ENTER.
The dubbing starts.
• Playback on the external DV equipment and recording on the
unit should start simultaneously.
• To pause dubbing, press selection keys to select
m_,,_O
then press ENTER. Both the unit and the external DV
equipment pause dubbing.
• To resume dubbing, press selection keys to select
I_-,_1_ ,
then press ENTER to start dubbing.
7
L---,J
The following on-screen display for DV dubbing appears when
ON SCREEN is pressed while the channel has been set to "DV".
[]
DV dubbing controller
If this mark is not displayed, check whether the DV equipment
has been connected to the unit.
[]
Auto capture button
Select to start or pause the dubbing. If ENTER is pressed when
the DV device is in the pause condition, preroll editing* where it
is possible to dub with a start time that is highly accurate will be
activated. When the DV device cannot be operated from the
unit (such as in camera mode), proceed with normal recording
(_ pg. 34).
* Preroll editing refers to the playback after the DV tape is slightly
rewind. (For DV devices that do not support the - lx speed, the
rewinding time may be Ionge_)
Sound monitor switch
For selecting the desired sound format for dubbing.
[]
Press • to stop dubbing.
• Both the unit and the external DV equipment stop dubbing.
NOTES:
• Dubbing copyright guarded programs is not possible.
• Original DV information such as the recording date and time are
not recorded.
• The superimposed indication during the operation or dubbing is
not recorded.
• If the dubbing is paused while the channel is set to "DV", you
cannot switch channels.
• Only DV format video can be dubbed. It is not possible to dub
MPEG2 format video.
When you dub from
camcorder
DV equipment
other
than
a
[]
[]
Perform steps 1 - 3.
Locate the point from where you want to start dubbing,
then stop on the DV equipment.
• If you pause the DV equipment in this step, a few
second's still picture will be recorded at the beginning of
the recorded program.
[] Set the input mode to "DV INPUT" on the DV equipment.
• If input mode is set to other than "DV INPUT", unwanted
pictures may be recorded at the beginning of the
recorded program.
[] Perform steps 6 and 7.
To skip unwanted part of the source picture
Press ENTER to stop both equipment, press P-, I_-_ or << to
locate the point where you want to resume dubbing, then press •.
Press selection keys to select
_'_O,
then press ENTER to
start dubbing.
54 ENEDITING
1 Make connections.
i EditFromA Camcorder
[]
You can use a camcorder as the source player and your unit as the
recording deck.
[]
If the camcorder
has no S-VIDEO output connector:
i
Recorder
I
7
(T(°M[VlNDoEI?R/_]UDIO
_
A
If the camcorder has no S-VIDEO output connector:
-- connect the camcorder's AUDIO/VIDEO OUT connectors to
the unit's [VIDEO/AUDIO (L(MONO)/R)] input connectors on
the front panel.
• When using a monaural camcorder, connect its AUDIO OUT
connector to the [AUDIO(L(MONO))]
input connector on your
unit.
[] If the camcorder has an S-VIDEO output connector:
-- connect the camcorder's AUDIO OUT and S-VIDEO OUT
connectors to the unit's [AUDIO] and [S-VIDEO] input
connectors on the front panel.
2 Press CH +/-to select "F-I".
A
• Set "FRONT AUX F-1" to "VIDEO" for the [VIDEO] input
connector, or "S-VIDEO" for the [S-VIDEO] input connector,
depending on the connector being used. (= pg. 59)
3
Press REC MODE repeatedly to set the recording mode.
4
Start playback on the camcorder slightly before the actual point
from where you wish to start dubbing.
5
Press • on the unit to start recording. Or while holding 0, press
I_ on the remote control. The dubbing starts.
Audio/video cable /
(not supplied) l
6
Upon completing dubbing, stop the unit and the camcorder.
• Stop recording on the recording deck (your unit), then stop
playback on the source player (camcorder).
NOTES:
• All necessary cables can be obtained from your dealer.
• Refer to the camcorder's instruction manual for operating
procedure.
• The quality of dubbed picture are poorer than that of the original.
AUD,O,V,D OOU
[]
If the camcorder
has an S-VIDEO output connector:
Recorder
T° [S-Vl iDEOI
S-video cable
(not supplied)
S-VIDEO OUT
AUDIO OUT
_
!inT°p_IU
DIO]
Audio cable
(not
supplied)
EDITING
EN55
1 Make connections.
| EditToOrFromAnotherRecorder
You can use your unit as the source player or as the recording
deck.
NOTE:
When using another recorder as the recording deck, refer to its
instruction manual.
[]
[]
When using your unit as the source player
-- connect it's [S-VIDEO/VIDEO/AUDIO
OUTPUT] connectors
to the input connectors on another recorder.
[] When using your unit as the recording deck
-- connect it's [L-I/F-I] connectors on the front or rear panel to
the output connectors on another recorder.
• When connecting to another recorder with S-Video connector,
set "REAR AUX L-1" or "FRONT AUX F-1" to "SWIDEO'.
2
When using your unit as the source player
TV receiver
Your unit
Player
TT
3
Press REC MODE repeatedly to set the recording mode.
4
Engage play mode on the source player.
•5 Engage record mode on the recording deck.
6
S-Video cable
Audio/video
.._
I
Audio/vidb!_
Another recorder
]
Recorder
[]
When using your unit as the recording deck
TV receiver
Your unit
Recorder
1 _ _:__ U
TT
Audio/video
_-Video cable
cable
Audio%
Another recorder
Player
Press CH +/- to select the external input.
• Select "F-1" when the source player is connected to the unit's
[VIDEO/AUDIO] or [S-VIDEO/AUDIO] input connectors on the
front panel, and select "L-1" when it is connected to the unit's
[VIDEO/AUDIO] or [SWIDEO/AUDIO] input connectors on the
rear panel.
Stop recording on the recording deck, then stop playback on
the source player.
NOTES:
• All necessary cables can be obtained from your dealer.
• When you use this unit as the source player for editing, be sure to
set "SUPERIMPOSE" or "OFF" before starting. (_ pg. 59)
56 ENEDITING
Connect the unit and a digital audio device using an optional
coaxial cable.
II DigitalAudioDubbing
You can dub selected audio from a DVD or Audio CD disc to a
digital audio device.
However, it is not possible to dub copy-protected discs.
I o Turn on the TV and select an input mode such as EXT1.
Example: Dubbing to an MD
Recorder
Place a disc on the unit and load an MD on the connected
digital audio device.
3
4
Select the audio to be dubbed.
Start playback slightly before the actual point from where you
wish to start dubbing.
5
Press II to pause playback.
6
Select the input mode on the connected
7
Press I_ to start playback on the unit.
8
Start recording on the digital audio device.
9
Stop recording on the digital audio device. Then press • to stop
playback on the unit.
digital audio device.
NOTE:
There may be a discrepancy of several seconds between where
you intend editing to start, and where it actually starts.
Digital audio device (MD
deck, etc.)
Coaxial cable
(not supplied)
To [DIGITAL OUT
(COAXIAL)] i
Player
I
2
I
Rear of unit
REHOTE CONTROL/SYSTEM
CONNECTION5
EN
57
| RemoteControlFunctions
RemoteControl1/2/3/4
I Connecting
ToAWithBuilt-in
DolbyDigital
Decoder
OrAnAmplifier
DTS
CodeSwitching
The remote control is capable of controlling four JVC video units
independently. Each of the units can respond to one of the four
codes (1,2, 3 or 4). The remote control is preset to send code 3
signals because your unit is initially set to respond to code 3
signals. You can easily modify your unit to respond to code 1,2 or
4 signals.
These instructions enable you to connect your unit to a Dolby
Digital Decoder or an amplifier with built-in DTS.
! ° ,
(b/I
•
Dolby Digital Decoder or
amplifier with built-in DTS
To DIGITAL AUDIO
input
® o_
Coaxial cabl_
(not supplied)
1-4_
-,_
7_ (8/
_
To [DIGITAL OUT
COAX AL
(9/](+/
_,--_
,.,.ENTER
Rear of unit
• IL,--i .L.',
..... _:_.;._
0000
0 O,
_•
,_SETUP
• Keep pressing SET UP down during step 1.
1 Press the number key "1" for 1, "2" for 2, "3" for 3 or "4" for 4 to
change the remote control code, then press ENTER.
Press ©/I on the unit to turn off the unit.
Press I_ on the unit for over 5 seconds while the unit is turned
off. The code currently set appears on the front display panel.
4
Press • on the remote control to change the unit's code. The
code currently set on the remote control blinks on the front
display panel for approximately 5 seconds, and is applied to the
unit.
1 Connect the unit and a Dolby Digital Decoder or an amplifier
with built-in DTS using an optional coaxial cable.
NOTE:
For details on [DIGITAL OUT] connector
AUDIO OUT". (_ pg. 58)
setting, refer to "DIGITAL
SETTINGS
58 ENSUBSZD.[ARY
The boldface settings below indicate the settings at your purchase.
II ModeSet
AUDIOOUTPUT
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
• DIGITALAUDIOOUT-- DOLBYDIGITAL/POM
/STREAM/
PCM / PCM ONLY
Set to the appropriate mode according to the type of the device
connected to [DIGITAL OUT] connector.
DOLBYDIGITAL/PCM:
Select this when you connect the digital input connector of a
Dolby Digital Decoder or an amplifier with a built-in Dolby Digital
Decoder.
STREAM/PCM:
_) (2) {3)If+/
Select this when you connect the digital input connector of an
amplifier with a built-in DTS, Dolby Digital, or MPEG
multichannel decoder.
'0 (_7(6)It-)
",b(8} C_,bl¢+/
I
col
I
J!t-I
PCMONLY:
= Selection
Keys
(/',V<1 _>)
ENTER
_o88
NOTE:
If you watch or play back a program recorded on a DVD-RAM or
DVD-RW (VR mode only) disc which contains multiple audio
languages, select "PCM ONLY" in advance and choose main or
sub audio with AUDIO.
• ANALOGAUDIOOUT-- STEREO/ DOLBYSURROUND
©000
OG
Select the appropriate setting to accommodate the unit to the
connected AN equipment. This function takes effect when a
DVD VIDEO disc is played back.
= SETUP
AUDIO
STEREO:
Various modes of this unit are categorized into menus nested in
2 levels shown in the following table. To change the settings of
these modes, find the desired mode in the menu, then follow the
procedure below. (For details on each menu, see pages 58
through 59)
DVDSETUP
Select this when you connect the linear PCM digital input of
other audio equipment (amplifier, MD or DAT deck, etc.).
LANGUAGE SET (u pg. 18)
AUDIO OUTPUT (_*_pg. 58)
UTILITY (_._pg. 62, 63)
FUNCTIONSETUP
VIDEO IN/OUT (,J pg. 21,59)
RECORDING SET (_ pg. 59)
DISPLAY SET (_ pg. 59)
OTHERS (.,:*'.pg. 60)
INITIALSETUP
TUNER SET (_ pg. 20)
CLOCK SET (_ pg. 19)
Select this when listening to conventional two-channel stereo
audio with the unit's [AUDIO OUTPUT] connectors connected
to a stereo amplifier/receiver
or TV set, or in case you want to
record the audio from a DVD VIDEO disc to a Mini Disc, etc.
DOLBY SURROUND:
Select this when listening to audio with the unit's [AUDIO
OUTPUT] connectors connected to an amplifier/receiver with a
built-in surround decoder or a surround decoder.
• D. RANGECONTROL-- NORMAL/ WIDERANGE/ TVMODE
The dynamic range (the difference between the loudest sound and
the quietest one) can be compressed during playback of a program
encoded in Delby Digital format.
This function takes effect when a DVD VIDEO disc recorded in
Dolby Digital format is played back at low or middle volume.
NORMAL:
• The procedure below shows how to set the desired option of the
"2ND AUDIO RECORD" mode as an example.
1 Press SET UP to access the Main Menu screen.
TV MODE:
Select this when connecting
well heard.
to a TV. Even soft sound can be
Press selection
press ENTER.
3
Press selection keys to
select "RECORDING
SET", then press
ENTER.
NOTES:
• This function has no effect on programs other than those
recorded in Dolby Digital format.
• The effect of "NORMAU' and "WIDE RANGE" may not be
different depending
on discs.
4
Press selection keys to
select "2ND AUDIO
• OUTPUTLEVEL-- STANDARD/ LOW
RECORD",
ENTER.
You can lower the output level of analogue audio to accommodate
the unit to the connected AN equipment.
6
then press
Press selection keys to
select the desired
setting, then press ENTER.
Press SET UP to complete the setting.
SET UP", then
Select this to deactivate this function when you enjoy wide
dynamic range program.
2
5
keys to select "FUNCTION
Normally select this setting to activate this function.
WIDERANGE:
STANDARD:
Normally select this setting.
LOW:
The output level of analogue audio is lowered.
SUBSIDIARY
SETTINGS
VIDEOIN/OUT
DISPLAYSET
• MONITORTYPE-- 4:3LB/ 4:3PS/ 16:9AUTO
/ 16:9FIX
• SUPERIMPOSE
-- OFF/ AUTO
For details, refer to "Monitor Set" (_ pg. 21).
When this function is set to "AUTO", various operational
appear on the TV screen.
• FRONTAUX F-1-- VIDEO/ S-VIDEO
Select the appropriate mode depending on the F-1 connector
([VIDEO] or [S-VIDEO]) being used on the front panel.
VIDEO:
To use the [VIDEO] input connector.
S-VIDEO:
To use the [S-VIDEO]
input connector.
• REARAUXL-1 -- VIDEO/ S-VIDEO
Select the appropriate mode depending on the L-1 connector
([VIDEO INPUT] or [S-VIDEO INPUT]) being used on the rear
panel.
VIDEO:
To use the [VIDEO INPUT] connector.
EN59
indicators
OFF:
To turn off superimposed
indications.
AUTO:
To superimpose operational indications for approximately
seconds just after the corresponding operation.
five
NOTES:
• Even when "SUPERIMPOSE"
is set to "OFF", you can display
the various operational indicators by pressing ON SCREEN on
the remote control. To clear the operational indicators, press
ON SCREEN again.
• When you use this unit as the source player for editing, be sure to
set "SUPERIMPOSE" to "OFF" before starting. (=:_ pg. 55)
• When you select "AUTO", during playback, the operation mode
indicators may be disturbed depending on the type of disc being
used.
S-VIDEO:
To use the [S-VIDEO
INPUT] input connector.
RECORDING
SET
• SAVEASLIBRARY-- OFF/ ON
When this function is set to "ON", the recording information is
automatically stored in the library. For details, refer to "Edit Library
Information" (_ pg. 51).
• GRAYBACK--OFF/ ON
OFF:
Select this when you want to receive an unstable channel with
poor signals.
ON:
When this function is set to "ON", the TV screen becomes all
gray when receiving a channel not in use.
• XP MODERECAUDIO-- DOLBYDIGITAL/ LINEARPCM
• DIMMER-- BRIGHT/ DIMMED1/ DIMMED2/ OFF
You can select the audio format when you record a title in XP
mode. When this function is set to "LINEAR PCM", you can obtain
a high-quality audio sound.
You can change the brightness
DOLBYDIGITAL:
To record in Dolby Digital format
LINEARPCM:
To record in Linear PCM format.
of the front display panel.
BRIGHT:
Normally select this. To turn on the display and blue lamp of the
front display panel.
DIMMED1/DIMMED2:
To change the brightness level, and turn off the blue lamp of the
front display panel.
OFF:
• 2ND AUDIORECORD-- OFF/ ON
When this function is set to "ON", if a SAP program is received, the
SAP audio is recorded on L/R tracks. The main audio is not
recorded. If a non-SAP program is received, the main audio is
recorded on L/R tracks.
When this function is set to "OFF", the SAP audio cannot be
recorded.
NOTE:
When the channel is changed on the unit;
• The "MONO" indicator appears on the screen for about 5
seconds if the program is a monaural broadcast.
• The "STEREO" indicator appears on the screen for about 5
seconds if the program is a stereo broadcast.
• Both "STEREO" and "SAP" indicators appear when a stereo
program is accompanied by SAP sound.
• Both "MONO" and "SAP" indicators appear when the main
audio on the monaural broadcast is accompanied by SAP
sound.
To turn off the display and blue lamp of the front display panel.
• POWERSAVE--OFF/ ON
When this function is set to "ON", you can reduce the power
consumption while the unit is turned off.
NOTES:
• During
-- the
• Power
-- the
Power Save mode -front display panel will be turned off.
Save does not work when -Automatic Satellite Program Recording mode is engaged.
• ONSCREENLANGUAGE--ENGLISH/ FRANCAIS
/ ESPANOL
This unit offers you the choice to view on-screen messages in
3 different languages.
• For details, refer to "On-screen Language Set" (= pg. 18).
60 E. SUBSIDIARY
SETTINGS
OTHERS
II ScanModeSet
• AUTOTIMER-- OFF/ ON
This is the setting for engaging timer recording standby mode.
OFF:
Press (_) to engage timer recording standby mode.
ON:
Timer recording standby mode is automatically
the unit is turned off.
engaged when
• RESUME-- 0FF/0N/DISC RESUME
When this function is set to "ON" or "DISC RESUME", you can use
the resume function. (_*._pg. 24)
OFF:
You cannot use the resume function.
ON:
The resume function works on the disc loaded on the unit.
DISCRESUME:
The unit retains a memory of the resume points of the last
30 discs played back, even though they have been ejected.
NOTE:
"DISC RESUME" setting works on DVD-VIDEO, VCD, SVCD and
finalized DVD-R/DVD-RW (Video mode) discs. For other types of
discs, the function under "ON" setting will be applied even if
"RESUME" is set to "DISC RESUME".
If you connect the unit and TV with Component Video Connection
([_._pg. 12), you can select the scan mode from two modes:
Interlaced scan mode which is used in the conventional TV
system, and Progressive scan mode which enables reproduction
of higher-quality images.
• Interlaced scan
In the conventional video system, a picture is shown on the display
monitor in two halves. The Interlaced scan system places lines of
the second half of the picture in-between lines of the first half of the
picture.
• Progressive scan
Progressive scan displays all the horizontal lines of a picture at
one time, as a single frame. This system can convert the interlaced
video from DVD into progressive format for connection to a
progressive display. It dramatically increases the vertical
resolution.
All'ENTION:
• Your TV needs to be compatible with Progressive.
• Connect the unit and the TV using a component video cable.
Turn on the unit.
Turn on the TV and select an input mode such as EXT1.
® oLo @
_DVD (_/I
oo88
0000
-PROGRESSIVESCAN
1
Press PROGRESSIVE
SCAN for 3 or more seconds.
• Video output indicator (1_) lights on the front display panel if
Progressive scan mode has been established. (_ pg. 13)
• Each press of PROGRESSIVE SCAN for 3 or more seconds
switches the scan mode.
NOTES:
• Progressive scan video signal is output from the [COMPONENT
VIDEO OUT (Y/PB/PR)] connectors. It will not be output from the
[VIDEO OUTPUT] and [S-VIDEO OUTPUT] connectors.
• Interlaced scan mode is the setting at your purchase.
• Interlaced scan mode might be suitable depending on video
material.
• Scan mode cannot be set while menu screen is displayed.
SUBSIDIARY
SETTING5
m
mTrayLock
E. 61
ChildLock
You can lock the disc tray to prohibit the unwanted disc ejection by
children.
You can disable the operations
function.
of this unit using the Child Lock
I oTurn on the unit.
)
)
To lock tray
When the unit is turned off, while holding m, press _Aon the unit.
"LOCK" appears on the front display panel and the disc tray is
locked.
To unlock tray
When the unit is turned off, while holding m, press _Aoil the unit.
"UNLOCK" lights up on the front display panel.
1 When the unit is turned on, press and hold DVD ©/I on the
remote control for more than 10 seconds.
oThe unit turns off and enters into Child Lock mode.
• When in Child Lock mode, "cr' will appear on the front display
panel indicating that Child Lock mode is engaged when an
attempt was made to operate buttons on the unit or remote
control.
2
Press and hold DVD ©/I on the remote control for more than
10 seconds.
• Child Lock is released and the unit turns on.
NOTE:
When in Child Lock mode, pressing TIMERQ during timer
recording releases Child Lock and recording is continued.
SETTZNGS
62 ENSUBSZD.[ARY
| Changing
VCRPlus+Setting
The VCR Plus+ programming system assigns a VCR Plus+ guide
channel number to the TV channels and the cable channels. These
GuideChannelNumberSet
1
Press SET UP to access the Main Menu screen.
2
Press selection keys to
select "INITIAL SET UP".
then press ENTER.
guide channel numbers are also called the VCR Plus+ channel
codes.
Most TV listings have a section, usually a chart, indicating the
guide channel numbers assigned to each station. To ensure that
VCR Plus+ timer recording operates correctly, it is necessary to
set the VCR Plus+ Guide Channel for each station.
If you have moved to a different area or if a broadcasting station's
channel number has been changed, perform the steps on the right
column to set the correct guide channel number.
NOTES:
3
Press selection keys to
select "TUNER SET",
then press ENTER.
4
Press selection keys to
select "GUIDE
CHANNEL SET", then
press ENTER.
5
Press selection keys to
select "GUIDE CH", then
press ENTER.
6
Press selection keys to
select the Guide
Channel number for the
• In many instances, the VCR Plus+ guide channel numbers for
cable and broadcast TV stations DO NOT match the channel
number on which it is received by your unit. Check your TV
listing, or contact your cable supplier for details.
• Many TV stations can be viewed on cable. Check your TV listing,
or contact your cable supplier for details.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
CLOCK SET
desired station as shown in the TV listings, then press ENTER.
• To change the Guide Channel number in 10 channel
increments, press and hold A v.
m
7
8
9
Press selection
Press SET UP to complete the setting.
Guide Channel
--SelectionKeys(SV_})
ENTER
oo88
0000
O_
=SET UP
keys to select "DVD CH", then press ENTER.
Press selection keys to select the channel number of the unit
on which desired broadcast is received, then press ENTER.
• Repeat steps 4 - 8 as necessary.
Number
"Guide Channel (GUIDE CH) Number" refers to the assigned TV
station numbers, according to broadcast area, for the VCR Plus+
timer recording. The Guide Channel Numbers can be found in
most TV listings.
SUBSIDIARY
SETTINGS
EN
63
FormatA DVD-RAMDisc
| FormatA Disc
1
2
Some DVD-RAM/RW discs are unformatted.
Format the disc when you use an unfermatted
delete all recordings and data on the disc.
Press selection
ENTER.
3
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD-RAM/RW disc to format.
keys to select "DVD SET UP", then press
Press selection keys to
select "UTILITY", then
press ENTER.
disc or you want to
ATTENTION:
• When a disc is formatted, all recordings and data are erased. It
is impossible to restore them.
• Never turn off the unit or disconnect the AC power cord while
"NOW FORMATTING..." is displayed on the TV screen.
Press SET UP to access the Main Menu screen.
I LANGUAGESET
I
4
Press selection keys to
select "FORMAT", then
press ENTER.
• The confirmation screen
appears.
5
Press selection keys to
select "YES", then press
ENTER.
• The confirmation screen appears.
6
Press selection
7
Upon completing formatting, "COMPLETED" appears on the TV
screen. Press ENTER to complete formatting.
Press SET UP to return to the normal screen.
8
keys to select "OK", then press ENTER.
FormatA DVD-RWDisc
.....
Selection
Keys
(AV_
ENTER
I
Perform steps 1 - 3 of "Format A DVD-RAM Disc" as above
before continuing.
2
Press selection keys to select "FORMAT", then press ENTER.
Press selection keys to choose "VR MODE" or "VIDEO
MODE", then press ENTER when "DISC WILL BE
FORMATTED" appears on the TV screen.
"VR MODE":
To be chosen when you want to record, erase, or edit data on
the disc repeatedly.
"VIDEO MODE":
_)
To be chosen when you want to erase all the data on the disc
once played back to record new data, or play back the disc on
other DVD players.
-$-o 8 8
0000
O(F
= SETUP
3
Press selection keys to select "YES", then press ENTER.
4
Upon completing formatting, "COMPLETED" appears on the TV
screen. Press ENTER to complete formatting.
5 Press SET UP to return to the normal screen.
NOTES:
• It is impossible to format Version 1.0 DVD-RW discs in Video
mode.
• It is impossible to format DVD-R discs.
• All the titles on a disc will be deleted once the disc is formatted
even if they are protected titles.
SETTXNGS
G4 ENSUBSXD.[ARY
FinalizeA DVD-R/RW Disc
| FinalizeA Disc
1
Finalizing DVD-R/RW discs recorded on this unit makes it possible
for the discs to be played back on other DVD players. DVD-RW
discs are finalized in the mode that the discs were formatted,
enabling playback on compatible DVD players.
Title names input in the Library Database Navigation are
registered as title names in the DVD menu. (_._ pg. 51)
A'n'ENTION.
• Never turn off the unit or disconnect the AC power cord while
finalization or cancellation of finalization is in progress.
• Turn on the unit.
• Turn on the TV and select an input mode such as EXT1.
• Load a DVD-R/RW disc to finalize.
Perform steps f - 3 of "Format A DVD-RAM Disc" (_._ pg. 63)
before continuing.
2
Press selection keys to select "FINALIZE",
3
The confirmation screen appears. Press selection
select "YES", then press ENTER.
4
then press ENTER.
keys to
The confirmation screen appears again. Press selection
to select "OK", then press ENTER.
• To cancel finalization, press "CANCEIJ'.
keys
5
Upon completing finalization, "COMPLETED" appears on the
TV screen. Press ENTER to return to the previous screen.
6 Press SET UP to return to the normal screen.
• Menu screen is cleared.
• Once a DVD-R/RW (Video mode) disc has been finalized, the
displays for original and play list do not appear. As only the
display for library appears, press TOP MENU to select the
desired title.
• Once a DVD-RW (VR mode) disc has been finalized, it can be
played on DVD players compatible with VR mode.
CancelTheFinalizationOf A DVD-RWDisc
1 Load a DVD-RW disc to cancel the disc finalization, and
perform steps f - 3 of "Format A DVD-RAM Disc" (_._ pg. 63)
before continuing.
2
Press selection
FINALIZATION",
keys to select "CANCEL
then press ENTER.
3
Press selection
keys to select "OK", then press ENTER.
4
TOPMENU
Selection
Keys(_V_
ENTER
_)
-3-o88
0000
O0
.... SETUP
Before finalizing
• It is possible to record on a blank space.
• It is possible to enter title names. (_ pg. 46)
• It is possible to delete titles. (_:*_pg. 44)
• It is impossible to overwrite recorded areas of DVD-R discs.
• Available recording capacity does not increase even if a recorded
program is deleted from a DVD_R disc.
• It is impossible to record or edit DVD-R/RW discs recorded on
other devices even if they have not been finalized.
After finalizing (For DVD-R/RW (Video mode) discs)
• Video and audio that are recorded in conformity to the DVD
Video standard before finalizing enables you to play back the
discs as DVD VIDEO discs.
• Although DVD-R/RW discs finalized on this unit become playable
on DVD players compatible with DVD-R/RW discs, some discs
still may not play, for which JVC cannot take responsibility.
• Marked points marked before finalizing will be deleted, and titles
will be divided automatically into "chapters" approximately every
5 minutes. (_*_pg. 9, 25)
• Depending on the DVD players and DVD-R/RW discs used, and
on the conditions of recording, it may not be possible to play back
the discs. In this case, play back the discs on this unit.
• Additional recordings become impossible.
DISC
Upon completing cancellation of finalization, "COMPLETED"
appears on the TV screen. Press ENTER to return to the
previous screen.
Press SET UP to return to the normal screen.
• When the disc finalization is canceled, the mode in which the
disc was formatted is restored, making the disc recordable.
• It is not possible to cancel the finalization of a DVD-R disc.
TROUBLESHOOTING
Before requesting service for a problem, use this chart and see if
you can solve the trouble yourself. Small problems are often easily
solved, and this can save you the trouble of sending your unit off
for repair.
Initializing
EN
65
Playback
•
The TV receiver's channel selector is not set to an input mode
such as EXT1.
-* Set the TV to an input mode such as EXT1.
• When interlace scanned program is played back, progressive
scan mode is selected.
-* Press ©/I to turn off the unit, press and hold ©/I, then press •
for 3 seconds or more.
--* Press and hold PROGRESSIVE SCAN until [] disappears
from the front display panel. (_:*_pg. 60)
General
• The AC power plug is disconnected from the AC outlet.
-* Connect the AC power plug to the AC outlet securely.
(_ pg. 16)
-* Remove the batteries, wait for 5 minutes or more, then load the
butteries again.
• The setting of the remote control code is inappropriate.
-* Set the same remote control code (1,2, 3, or 4) on both the unit
and the remote control. (_ pg. 57)
• The batteries are discharged.
-* Replace the dead batteries with new ones.
• The disc is loaded upside down.
-* Place the disc on the disc tray with the playback surface facing
down. (_ pg. 10)
• A disc not being compatible with the unit is loaded.
-* Load a playable disc on the unit. (_ pg. 8)
• A dirty disc is loaded.
-* Clean the disc. (_ pg. 11)
• Defective disc is loaded.
-* Replace the warped or scratched disc with a normal one.
-* Images are blurred or distorted at the point where the playback
speed changes and this is not a malfunction of the unit.
•
The source (another video recorder, camcorder) has not been
properly connected.
-* Confirm that the source is properly connected.
• All necessary power switches have not been turned on.
-* Confirm that all units' power switches are turned on.
• The setting of the input channel position is inappropriate.
-* Select the input channel position ("F-I" or "L-I") that
corresponds to the input terminal connected to the external
equipment. (_ pg. 54)
-* Playback does not start for approximately 30 seconds after
recording is stopped and this is not a malfunction of the unit.
Recording
•
The channel position does not correspond to that in the
receiving area.
-* Set the correct channel position for the receiving broadcast.
(_ pg. 20)
-* Set "SUPERIMPOSE"
to "OFF". (_*_.pg. 59)
• There are cases when the operation is prohibited on the disc.
• Lightning or static electricity may cause malfunction of the unit.
-* Disconnect the AC power plug from the AC outlet and connect
again. Then turn on the unit.
• The setting of the remote control code is inappropriate.
-* To operate the unit using a JVC TV remote control, set the
remote control code of the unit to "1" (Default: "3"). (_:*_.
pg. 57)
•
-*
•
-*
•
-*
•
No disc or a disc not being compatible with the unit is loaded.
Load a recordable disc on the unit. (_ pg. 7)
The disc loaded is not formatted.
Format the disc. (_*_.pg. 63)
A finalized disc is loaded.
Recording cannot be made on finalized discs. Load a
recordable disc on the unit.
The disc is full or does not have enough space for the title to be
recorded.
-* Clear unnecessary titles on the disc or load a blank disc.
(_ pg. 44)
66 EN TROUBLESHOOTING
Other Problems
TimerRecording
•
Date and time is not correct.
-* Set date and time correctly. (u pg. 17, 19)
• Timer recording is in progress.
--* Timer programming can't be performed while a timer recording
is in progress. Wait until it finishes.
• Date and time is not correct.
-* Set date and time correctly. ([*_ pg. 17, 19)
+'l_tIi ".Ili'(!ll
•
ilill'('i
ll"il!)_lil
i I,'_'_r(7t__-_
--* Press PROGRESSIVE
•
--*
•
--*
Date and time is not correct.
i,'?_v£illtl'.IPr_
_,"L'4II_II_BI'_,
•
,, -
_l_..rilillil,
lj ..,,l,.I_ri_!
• Power failure occurred.
-* Set date and time correctly. (_ pg. 19)
•
_1
lilll
:.l,L_i4
• Those channels have been designated to be skipped.
--* If you need the skipped channels, restore them using "Manual
Channel Set" ([_._pg. 20).
•
After the manual settings were made, Auto Channel Set was
performed.
--* Do no perform Auto Channel Set after making manual settings,
proceed to perform "Clock Set" (t:_._pg. 19).
LV_lllll
• The DBS receiver is not connected properly to this unit.
--* Connect the DBS receiver correctly to the unit's [L-1 INPUT]
connectors. (_ pg. 42)
I
/
- . ._
• The unit's channel positions have been set incorrectly.
--* Refer to "Guide Channel Number Set" (_._pg. 62) and reperform the procedure.
mT;mll
ilt_-_
i1"_ ,q_
lights off on the front display panel.
The camcorder's microphone is too close to the TV.
Position the camcorder so its microphone is away from the TV.
The TV's volume is too high.
Turn the TV's volume down.
llil|i'lll'_
-* Set date and time correctly. ([*_ pg. 17, 19)
• The channel position does not correspond to that in the
receiving area.
--* Set the correct channel position for the receiving broadcast.
(_ pg. 20)
SCAN for 3 or more seconds so that the
Video output indicator ([])
The PC's data recorded on a DVD-RAM drive cannot be
cleared on this unit.
--* Format the disc. (When the disc is soiled, wipe the disc with a
soft dry cloth before formatting.) (_._pg. 11,63)
rill)
--* Reset the unit by disconnecting
outlet and connect again.
lllil
the AC power plug from the AC
TROUBLESHOOTING
EN
67
On-screenMessage
• A disc that is not registered in the library has been inserted.
Register the disc as necessary. (_ pg. 51)
Ill-l=llil
• An attempt has been made to start DV dubbing when a digital
video camera is not properly connected to the unit.
• Check the connection. (_ pg. 53)
m]l-'li _:l;#:#;I
• Appears when a title that has been selected in the library is not
contained in the loaded disc.
• Recording and/or editing cannot be performed.
• The number of titles exceeds 99.
• The memory for registration for the Navigation system is full. The
recording cannot be started even though the capacity for the
recording is enough.
• The number of play lists exceeds 99.
• To set the timer program, the clock must be set in advance.
(_ pg. 19)
• The remaining capacity of the memory is not enough for
registration for the Navigation system. The recording cannot be
started even though the capacity for the recording is enough.
• You can program this unit to timer record as many as
8 programs. To program more, you need to cancel a timer
program already set. (_ pg. 41)
• When a playback-only disc or a finalized disc is loaded, • has
been pressed. (_ pg. 8)
• On-Disc Timer Programming has been attempted when a disc
that is not compatible with the function is loaded.
l[o] _]f.-[4 Illf.t=l;idl_l
lt4!][o]llolo]_]l
=lll;[o];i
[=]-"l =[o][g e][,."Io]
• A disc loaded cannot be played back on this unit since the region
number of the disc does not match that of the unit. (_ pg. 8)
• On-Disc Timer Programming has been attempted when a disc is
not loaded, or loaded upside down.
• An invalid PlusCode number has been input.
• When an incompatible
(_ pg. 8)
disc is loaded, I_ has been pressed.
• To set the timer program using the VCR Plus+ system, the Guide
Channel Number must be set in advance.
• Formatting is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry. (_._pg. 11, 63)
",I1t=(,-"t.Illl_.(t%lllilo]
{-'il[o]'.lllt=[_.]lti]ll[!t
• During Live Memory playback, • has been pressed. (_ pg. 27)
illVllllt
I-'l=[i,_o]-'1mill [_ [_o]_V_l',l
1111=Ill
• Appears when you tried to input a PlusCode number during timer
recording or instant timer recording.
• Timer recording has finished during Live Memory playback.
• Timer recording finished during Live Memory playback, then the
next timer recording is about to begin while playback continues.
• An attempt has been made to record copy-protected contents.
• An attempt has been made to record copy-once contents on a
disc that is not CPRM compatible.
• The unit has detected invalid contents at the start or in the middle
of playback.
• Finalizing is not complete since the disc may be dirty or
damaged. Take out the disc, clean it and retry.
• Canceling disc finalization is not complete since the disc may be
dirty or damaged. Take out the disc, clean it and retry.
68 ENA PPENDLY
LanguageCodeList
AA
Afar
IN
Indonesian
RU
Russian
AB
Abkhazian
AF
Afrikaans
IS
Icelandic
RW
Kinyarwanda
IW
Hebrew
SA
Sanskrit
AM
AR
Ameharic
JI
Yiddish
SD
Sindhi
Arabic
JW
Javanese
SG
AS
Sangho
Assamese
KA
Georgian
SH
Serbo-Croatian
AY
Aymara
KK
Kazakh
Sl
Singhalese
AZ
Azerbaijani
KL
Greenlandic
SK
Slovak
BA
Bashkir
KM
Cambodian
SL
Slevenian
BE
Byelorussian
KN
Kannada
SM
Samoan
BG
Bulgarian
KO
Korean (KOR)
SN
Shona
BH
Bihari
KS
Kashmiri
SO
Somali
BI
Bislama
KU
Kurdish
SQ
Albanian
BN
Bengali, Bangla
KY
Kirghiz
SR
Serbian
BO
Tibetan
LA
Latin
SS
Siswati
BR
Breton
LN
Lingala
ST
Sesotho
CA
Catalan
LO
Laothian
SU
Sundanese
CO
Corsican
LT
Lithuanian
SW
Swahili
CS
Czech
LV
Latvian, Lettish
TA
Tamil
CY
Welsh
MG
Malagasy
TE
Telugu
DZ
Bhutani
MI
Maori
TG
Tajik
EL
Greek
MK
Macedonian
TH
Thai
EO
Esperanto
ML
Malayalam
TI
Tigrinya
ET
Estonian
MN
Mongolian
TK
Turkmen
EU
Basque
MO
Moldavian
TL
Tagalog
FA
Persian
MR
Marathi
TN
Setswana
FJ
Fiji
MS
Malay (MAY)
TO
Tonga
FO
Faroese
MT
Maltese
TR
Turkish
FY
Frisian
MY
Burmese
TS
Tsonga
GA
Irish
NA
Nauru
TT
Tatar
GD
Scots Gaelic
NE
Nepali
TW
Twi
GL
Galician
OC
Occitan
UK
Ukrainian
GN
Guarani
OM
(Afan) Oromo
UR
Urdu
GU
Gujarati
OR
Oriya
UZ
Uzbek
HA
Hausa
PA
Panjabi
Vl
Vietnamese
HI
Hindi
PL
Polish
VO
Volapuk
HR
Croatian
PS
Pashto, Pushto
WO
Wolof
HU
Hungarian
PT
Portuguese
XH
Xhosa
HY
Armenian
QU
Quechua
YO
Yoruba
IA
Interlingua
RM
Rhaeto-Romance
ZH
Chinese
IE
Interlingue
RN
Kirundi
ZU
Zulu
IK
Inupiak
RO
Rumanian
SPECIFICATIONS
Power requirement
AC 126 V _,, 60 Hz
Power consumption
Power on: 30 W
Power off: 2.7 W
Temperature
Operating: 5°C to 35°C (41°F to 95°F)
Storage: -20°C to 6O°C (-4°F to 140°F)
Operating position
Horizontal only
Dimensions (WxHxD)
435 mmx 70 mmx 300 mm (17-3/16" x 2-11/16"x
11-13/16")
Weight
3.4 kg (7.5 Ibs)
wA
im]:(171_._lJ
=]Ill
S-video input
Y
: 1.0 Vp-p, 75 £)
C
: 0.286 Vp-p, 75 £)
S-video output
Y
: 1.0 Vp-p, 75 £)
C
: 0.3 Vp-p, 75 £_
Video input
: 1.0 Vp-p, 75 £) (pin jack)
Video output : 1.0 Vp-p, 75 £_ (pin jack)
Audio input
: 2 Vrms (pin jack)
Audio output : 2 Vrms (pin jack)
i.Link
: 4-pin for DV input
Component video output
Y
: 1.0 Vp-p, 75 £)
Pb/Pr
: 0.7 Vp-p, 75 £_
Corresponding to copy protection
Digital audio output
: Coaxial
Corresponding
Surround
Bit stream
Recordable disc: DVD-RAM 12 cm (4.7 GB/9.4 GB)
DVD-RAM 8 cm (1.4 GB/2.8 GB)
DVD-R 12 cm (4.7 GB)
DVD-R 8 cm (1.4 GB)
DVD-RW 12 cm (4.7 GB)
DVD-RW 6 cm (1.4 GB)
Recording format
DVD-RAM
: DVD Video Recording format
DVD-R
: DVD Video format
DVD-RW
: DVD Video format, DVD Video Recording format
Recording time
Maximum 6 hours (with
(XP)
: Approx.
(SP)
: Approx.
(LP)
: Approx.
(EP)
: Approx.
(FR)
: Approx.
Audio
recording
Video recording
4.7 GB disc)
1 hour
2 hours
4 hours
6 hours
1 hour - 6 hours
system
: Dolby Digital (2 ch)
Linear PCM (XP mode only)
compression
system
: MPEG2 (CBR/VBR)
EN69
Selectable
to Dolby Digital and DTS Digital
in digital audio output setting menu
i|lJ _I;i ;TidILV_l
;i ;!
Tuning system
: Frequency synthesizer tuner
Channel coverage
VHF
: Channels 2 - 13
UHF
: Channels 14 - 69
CATV
: 113 Channels
Clock reference : Quartz
Program capacity
: 30 days programmable timer/8 programs
Memory backup
time
: Approx. 5 sec.
r:T_ ::[,.',_',[.];
fl ::[,.']
Provided accessories
: RF cable,
Audio/video cable,
Infrared remote control unit,
"AA" battery x 2
Specifications shown are for SP mode unless otherwise specified.
E. & O.E. Design and specifications subject to change without
notice.
70 EN
LIST OF TERMS
A
O
A-B Repeat Playback ................................................
Adjusting The Picture Quality .....................................
Angle Selection ........................................................
Audio Language/Sound Selection ...............................
Auto Channel Set .....................................................
Auto Clock ...............................................................
Auto Tuner Set .........................................................
31
32
25
26
20
17
17
Automatic Satellite Program Recording
.......................
42
Check, Cancel And Change Programs ........................
Child Lock ...............................................................
41
61
D
Disc menu ...............................................................
23
R
Disc Remaining Time ................................................
Disc Resume ...........................................................
35
60
Discs For Playback Only .............................................
DV Dubbing .............................................................
DVD menu ...............................................................
8
53
23
E
Elapsed Recording Time Indication ............................
35
Random Playback .....................................................
Recordable/Playable
Discs ..........................................
Recording Medium And Format ....................................
Recording mode .......................................................
Region Number ..........................................................
Register Disc ............................................................
Repeat Playback ......................................................
Resume Function .....................................................
F
File Structure Of Discs ................................................
Finalize ...................................................................
Format disc ..............................................................
9
64
63
Frame-By-Frame Playback ........................................
Free Rate Function ...................................................
23
36
G
Guide Channel Number Set .......................................
62
C
I
Instant Timer Recording (ITR) ....................................
Interlaced scan .........................................................
35
60
L
On-Disc Timer Programming ................................
One Touch Replay ....................................................
On-screen Bar ..........................................................
On-Screen Display ....................................................
On-screen Language Set ...........................................
15
18
P
Pan&Scan ................................................................
21
Play List ...................................................................
Playback Control (PBC) Function ...............................
Program Playback ....................................................
Programs overlap .....................................................
Progressive scan ......................................................
47
26
33
41
60
Second Audio Recording ...........................................
36
Select The Switching Interval Of The Slide Show ......... 33
Semiauto Clock Set ..................................................
19
Setting the Progressive Mode ....................................
Simultaneous Recording and Playback .......................
Skip Search .............................................................
Slow Motion .............................................................
Soundtrack Selection ................................................
Still Picture ...............................................................
Subtitle Selection ......................................................
32
28
24
24
26
23
25
T
Time Sea_h
32
............................................................
68
21
Top menu ................................................................
Tray Lock .................................................................
Library Database Navigation ......................................
Live Memory Playback ..............................................
43
27
U
Unplayable Discs ........................................................
20
19
Manual Timer Programming .......................................
Marking Positions To Play Back Again Later ................
Menu/Audio/Subtitle Language Set .............................
Monitor Set ..............................................................
38
25
18
21
33
7
9
34
8
51
30
24
S
Language Code List ..................................................
Letter Box ................................................................
M
Manual Channel Set .................................................
Manual Clock Set .....................................................
39, 40
24
30
23
61
8
V
VCR Plus+ Setting ....................................................
VCR Plus+ Timer Programming .................................
62
37
WARRANTY(Only in U.5.A.)
EN 71
_r
_r
*_r
LIMITEDWARRANTY
_r
IUSAONLY
I
[ ONLY FOR PRODUCT PURCHASED IN U.S.A. ]
CONSUMER
VIDEO
`*
`*
1-90
* JVC COMPANY OF AMERICA (JVC) warrants this product and all parts thereof, except as set forth below ONLY
* TO THE ORIGINAL RETAIL PURCHASER to be FREE FROM DEFECTIVE MATERIALS AND WORKMANSHIP from
-k
* the date of original
*
purchase for the period shown below.
_r
PARTS
("The Warranty
Period")
LABOR
1 YR
90 OAYS
*
* THIS LIMITED WARRANTY IS VALID ONLY IN THE FIFTY (50) UNITED STATES, THE DISTRICT OF COLUMBIA
* IN THE COMMONWEALTH OF PUERTO RICO.
AND-*
*
Yr
WHAT WE WILL DO:
* If this product is found to be defective within the warranty period, JVC will repair or replace defective parts with new or
rebuilt equivalents at no charge to the original owner. Such repair and replacement services shall be rendered by JVC
* during normal business hours at JVC authorized service centers. Parts used for replacement are warranted only for the
** remainder of the Warranty Period. All products may be brought to a JVC authorized service center on a carry-in basis.
`* Color televisions with a screen size of 27" or greater qualify for in-home service. In such cases, a technician will come
* to your home and either repair the TV there or remove and return it if it cannot be repaired in your home.
_r
*
,k
`*
*
**
-_
WHAT YOU MUST DO FOR WARRANTY
SERVICE:
Please do not return your product to the retailer
Instead, return your product to the JVC authorized service center nearest you. If shipping the product to the service
center, please be sure to package it carefully, preferably in the original packaging, and include a brief description of
the problem(s). Please call 1-800-252-5722 to locate the nearest JVC authorized service center. Service locations
can also be obtained from our website http://www.jvc.com. If your product qualifies for in-home service, the service
representative
will require clear access to the product.
,* If you have any questions
. at 800-252-5722
concerning
your JVC Product,
please
contact
our Customer
Relations
`*
*
`*
`*
Yr
_r
*
`*
`*
`*
"Jr
Department
,
* WHAT IS NOT COVERED:
-k This limited warranty provided by JVC does not cover:
,
t. Products which have been subject to abuse, accident, alteration, modification, tampering, negligence, misuse, faulty
*
installation, lack of reasonable care, or if repaired or serviced by anyone other than a service facility authorized by
JVC to render such service, or if affixed to any attachment not provided with the products, or if the model or serial
`*
number has been altered, tampered with, defaced or removed;
.
2. Initial installation, installation and removal from cabinets or mounting systems.
-_- 3. Operational adjustments
covered in the Owner's Manual, normal maintenance,
video and audio head cleaning;
** 4. Damage that occurs in shipment, due to act of God, and cosmetic damage;
.
5. Signal reception problems and failures due to line power surge;
,* 6. User Removal Memory Devices/Video Pick-up Tubes/OCD Image Sensors are covered for 90days from the date of purchase;
.
7. Accessories;
* 8. Batteries (except that Rechargeable
Batteries are covered for 90 days from the date of purchase);
* 9. Products used for commercial purposes, including, but not limited to rental.
_r 10. Loss of data resultant from malfunction of hard drive or other data storage device.
`*
`*
`*
,
`*
There are no express
warranties
except as listed above.
`*
`*
*`*
,
`*
`*
`*
Yr
`*
`* THE DURATION OF ANY IMPLIED WARRANTIES, INCLUDING THE IMPLIED WARRANTY OF MERCHANTABILITY,
IS
LIMITED TO THE DURATION OF THE EXPRESS WARRANTY HEREIN.
_r
"k JVC SHALL NOT BE LIABLE FOR ANY LOSS OF USE OF THE PRODUCT, INCONVIENCE, OR ANY OTHER
* DAMAGES,
WHETHER
DIRECT, INCIDENTAL
OR CONSEQUENTAL
(INCLUDING,
WITHOUT
LIMITATION,
DAMAGE TO TAPES, RECORDS OR DISCS) RESULTING FROM THE USE OF THIS PRODUCT, OR ARISING OUT
`* OF ANY BREACH OF THIS WARRANTY.
ALL EXPRESS AND IMPLIED WARRANTIES,
INCLUDING
THE
WARRANTIES
OF MERCHANTABILITY
AND FITNESS FOR PARTICULAR
PURPOSE, ARE LIMITED TO THE
-_ WARRANTY PERIOD SET FORTH ABOVE.
_`*
_r
_r
`*
*
* Some states do not allow the exclusion
of incidental or consequential
damages or limitations
on how long an
* implied warranty lasts, so these limitations or exclusions
may not apply to you. This warranty gives you specific
** legal rights and you may also have other rights which vary from state to state.
,
*
*
*
`*
`*
JVC COMPANY OF AMERICA
DIVISION OF JVC AMERICAS CORP.
1700 Valley Road
Wayne, NJ 07470
REFURBISHED PRODUCTS CARRY A SEPARATE WARRANTY, THIS WARRANTY DOES NOT APPLY. FOR DETAIL
OF REFURBISHED
PRODUCT WARRANTY, PLEASE REFER TO THE REFURBISHED
PRODUCT WARRANTY
INFORMATION PACKAGED WITH EACH REFURBISHED PRODUCT.
For customer use:
Enter below the Model No. and Serial No. which is located either on the rear, bottom or side of the cabinet.
Retain this information for future reference.
Model No. :
Serial No. :
Purchase
Name of dealer :
date :
`*
`*
`*
FOR SERVICZNG(OnLy in U.S.A.)
THANK YOU FOR PURCHASmNG THIS JVC PRODUCT.
WE WANT TO HELP YOU ACHHEVE A PERFECT
EXPERHENCE.
C3
_0
!
=.&
NEED HELP ON HOW TO HOOK UP?
NEED ASSmSTANCE ON HOW TO OPERATE?
NEED TO LOCATE A JVC SERVICE CENTER?
LmKE TO PURCHASE
ACCESSORmES?
HELP!
HERE
TOLL
EE: 1
!
Remember
(n
VC,COm
to retain your Bill of Sale for Warranty
Do not attempt
to service
Service.
the product yourseJf
Caution
To prevent electrical shock, do not open the cabinet.
There are no user serviceable parts inside.
Please
refer to qualified
service
personnel
for repairs.
BT-51005-9
(0904)
JVC
Printed
©
2005
Victor
Company
of Japan,
Limited
_/LU2Z2_J
u
in China
0205CSH-SW-SC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement