Contents - Hannspree
Regulatory Information.......................2
Description of Warning Symbols.......2
Safety Notices......................................2
Preface. ................................................4
Warranty and Service / Repair............4
Cleaning...............................................4
1. Getting Started.................................5
• Package Contents...........................5
ENGLISH
Contents
3. Adjusting On-Screen Display (OSD)
Settings...........................................15
• On-Screen Menus Selection. ........16
• Media Center Menu.......................20
• PVR (Personal Video Record).......21
4. Troubleshooting............................22
5. Support Timing..............................23
6. Specifications................................24
• Introducing the TV...........................5
• Features..........................................5
• Foot Stand Installation.....................6
• Disconnecting the Stand. ................6
• Installing the Wall Mount Kit............7
• Control Panel...................................8
• Input and Output Jacks. ..................9
• Remote Control.............................10
2. Setting up your TV.........................11
• Power Connection......................... 11
• Rear Connections.......................... 11
• Using the TV..................................12
Turning the TV On and Off............12
Running Setup Wizard..................12
Selecting Your Content Source.....13
Performing an Automatic Channel
Search..........................................13
Selecting Channels.......................13
Setting Up Your Favorite
Channels.......................................14
Resetting to Factory Default
Settings.........................................14
1
ENGLISH
Regulatory Information
CE Conformity Statement
This device is in conformity with
the requirements of EU Council
Directive 2004/108/EC on the
approximation of the laws of
the Member States relating to
electromagnetic compatibility
and Directive 2006/95/EC on
the harmonization of the laws of
Member States relating to electrical
equipment for use within certain
voltage limits. Hannspree cannot
accept responsibility for any
failure to satisfy the requirements
resulting from a non-recommended
modification of the device.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
Description of Warning
Symbols
WARNING
This symbol is used to alert users
to pay attention to important
descriptions regarding usage,
maintenance (repair), and
additional important information
related to this TV.
CAUTION
This symbol is used to alert users
to the risk of electric shocks due
to dangerous and uninsulated
components.
Safety Notices
Installation Safety Notes
Location
Avoid allowing the TV to get
prolonged exposure to sunlight or
other strong sources of heat. Leave
sufficient distance between the
TV and the wall to provide enough
space for the emission of heat.
To reduce the risk of fire
or electric shock, do not
expose this apparatus to
rain or moisture. Apparatus shall not
be exposed to dripping or splashing
and no objects filled with liquids,
such as vases, shall be placed on
the apparatus.
2
These servicing
instructions are for use by
qualified service personnel
only. To reduce the risk of electric
shock, do not perform any servicing
other than that contained in the
operating instructions unless you
are qualified to do so.
To prevent the spread of
fire, keep candles or other
open flames away
from this product at all times.
Installation
• Do not place the TV in locations
where there is excessive steam
or dust.
• Avoid blocking the TV’s vents, do
not place the TV on a bed, sofa,
carpet, or in a sealed cabinet.
• Install the outdoor antenna away
from power transmission lines to
avoid possible danger.
Personal Safety
• To avoid overloading the power
supply, never plug too many
electrical devices into an outlet,
power strip, or extension cable.
• Dangerous high-voltage electric
power components are located
inside the TV. To avoid electric
shock, do not disassemble the
casing.
• Do not place or drop metals, small
objects, or flammable materials
into the vent of the TV.
• If the TV is dropped, falls down,
or is otherwise damaged, unplug
the power cord immediately and
contact an authorized service
technician.
• If any fluid is sprayed or dropped
into the TV, contact an authorized
service technician.
• The screen of the TV is made of
glass. Avoid hitting or scraping
it. If the screen is broken, do not
touch the broken glass.
• Do not allow children to use the
TV unattended.
• Be careful when disconnecting the
power plug. Hold the plug. Do not
attempt to disconnect the plug by
pulling on the power cord.
• Batteries shall not be exposed to
excessive heat such as sunshine,
fire or the like.
• Where the mains plug or an
appliance coupler is used as the
disconnect device, the disconnect
device shall remain readily
operable.
Trademark Notice
Hannspree products
incorporate HighDefinition Multimedia Interface
(HDMI™) technology.
HDMI, the HDMI Logo, and HighDefinition Multimedia Interface
are trademarks or registered
trademarks of HDMI Licensing
LLC in the United States and other
countries.
Manufactured
under license from
Dolby Laboratories. Dolby and the
double-D symbol are trademarks of
Dolby Laboratories.
The “HD TV” Logo and “1080p”
qualifier Logo are trademarks
of DIGITALEUROPE.
“DVB and the DVB logos
are trademarks of the DVB
Project”.
• If the remote control is not used
for a long period, remove the
batteries and store them properly.
• Handle damaged or leaking
batteries carefully, and wash
hands with soap if they come
in contact with leaked chemical
fluids.
• If your remote control has two
batteries, do not mix new and
old batteries, or the life of the
new batteries will be shortened.
Chemical fluids may leak from the
old batteries.
• Danger of explosion if battery
is incorrectly replaced. Replace
only with the same or equivalent
type recommended by the
equipment manufacturer. Discard
used batteries according to
manufacturer’s instructions.
• Refer to your local recycling or
waste disposal rules and contact
a local waste disposal vendor to
dispose of used batteries.
• The remote control cover may
have a magnet in it, so do not
place magnetic sensitive items
such as watches, credit cards, or
flash media close to the cover.
• Do not use force when pulling the
remote control cover open; you
may damage the hinge.
ENGLISH
Copyright
© Copyright 2011 Hannspree, Inc.
All rights reserved. This manual is protected by copyright and distributed under licenses restricting its use, copying
and distribution. No part of this manual may be reproduced in any form by any means without the prior written
authorization of Hannspree. The TV described in this manual may include copyrighted software of Hannspree (or
other third parties). Hannspree (or other third parties) preserves the exclusive rights for copyrighted software, such
as the right to distribute or reproduce the copyrighted software. Accordingly, and to the extent allowed by applicable
law, any copyrighted software contained in the product described herein shall not be distributed, modified, reverse
engineered, or reproduced in any manner without the prior written authorization of Hannspree (or of other third
parties).
The Hannspree logos presented herein are trademarks of Hannspree. All other product names, trademarks or logos
mentioned herein are used for identification purpose only, and may be the trademarks or registered trademarks of
their respective owners.
The purchase of the product described herein shall not be deemed to grant, either directly or by implication, estoppel
or otherwise, any license under the copyrights, patents, patent applications or trademarks of Hannspree, except for
the normal, non-exclusive use that arises by operation of law in the sale of a product.
RECYCLING INFORMATION
We, the Hannspree care very much about our environment protection strategy and firmly believe that it helps us have
healthier earth via appropriate treatment and recycling of industrial technology devices at the end-of-life.
These devices contain recyclable materials, which can be re-decomposed and re-integrated into brand-new marvels.
On the contrary, other material can be classified to hazardous and poisoned substances. We strongly encourage you
to contact the provided information to recycle this product.
For more information, please visit
www.hannspree.com/
According to WEEE regulation, this TV can’t be handled as normal trash in Europe when it is out of usage.
Please refer to the recycle information from our website to handle it.
3
ENGLISH
Notes:
• The LED TV is for entertainment use only and visual display tasks are excluded.
• This device uses a VGA connector to connect to a PC. To reduce the influence of main frequency on the source
signal, use a VGA monitor cable with ferrite shield.
Preface
Thank you for purchasing a Hannspree LED TV. Your new TV will allow you to enjoy superior audio and video while
enriching your lifestyle with advanced technology.
Please carefully read this manual in its entirety before setting up, using or operating your TV. To ensure the safe and
correct installation and operations of the TV, it is important that the safety and operation instructions in this manual
are followed.
This instruction manual is designed to assist you in setting up and using the TV. The information in this manual
has been carefully checked for accuracy; however, no guarantee is given to the correctness of the contents. The
information in this manual is subject to change without notice.
To the extent allowed by applicable law, Hannspree, Inc. (“Hannspree”) shall not be liable for direct, indirect, special,
exemplary, incidental or consequential damages arising from any defect or omission in this manual, even if advised
of the possibility of such damages in advance.
Warranty and Service / Repair
For complete warranty service information, please refer to the “Warranty Card” enclosed with your TV.
Service and Repair Information for United Kingdom:
Should the need for service arise, please contact HANNspree Technical Service Center and refer to the warranty
card for the Terms and Conditions.
Please visit HANNspree Europe Website:
http://www.hannspree.com/eu
and go to the “Service” – “Repair Service” section.
Packing Material Disposal:
Please refer to your local laws and directives to ensure an environmentally safe disposal.
Keep this manual for later use.
Cleaning
Instruction for cleaning the TV
1 Clean your TV frequently with a soft cloth to remove dust and dirt. More persistent dirt can be removed with a moist
cloth with soft soap.
2 Do not use detergents or any other aggressive cleaning. This might damage the housing or screen surface.
4
ENGLISH
1. Getting Started
Package Contents
Make sure the following components are included in the box. Please contact Hannspree
Customer Service immediately if anything is missing or damaged.
User'
s Ma
TV
nual
User’s manual
Quick
GuideStart
Quick start guide
Warra
nt
y Card
Warranty card
INPUT
LAST
Pro.LIST
INFO
MENU
OK
EPG
EXIT
MUTE
VOL
TEXT
P
I - II
SUBTITLE
FREEZE
ASPECT
SLEEP
FAV.
PVR
TV stand
Power cord
YPbPr cable
Remote control and
batteries
Introducing the TV
You can watch DVB-T or digital television channels, and easily connect a VCR, STB or DVD
player to the SCART, HDTV (Component), and HDMI input port. You can also use the TV as
a monitor for your PC by connecting it through the VGA port.
Convenient control buttons located on the TV and a handy remote control let you change
channels, adjust the volume, and change display settings through an easy-to-use on-screen
display menu system. The built-in stereo speakers provide full rich sound and a convenient
audio output port lets you connect to an external audio system or earphones.
Features
• TV Tuner: Built-in TV Tuner (analog,
DVB-T)
• Audio/ Video support:
– SCART input
– VGA (PC) input
– HDMI input
– HDTV (Component) input
– CVBS audio input (Component share
with CVBS)
– VGA (PC) audio input
– 3.5 mm stereo earphone output
• On-Screen Display (OSD) menu system
• Teletext (TV RF+SCART) 1.5v. with 1000
pages memory
• Built-in stereo speakers
• Image Enhancement Technology
– 3:2/2:2 pull down (24P)
– 3D Comb Filter
• Noise Reduction
• Advanced 3D de-interlacing
• Edge Enhancement
• HDTV 1080P
• PVR and Time Shift functions
Note:
• The supporting devices mentioned in this manual may vary on different models. For more information, please
refer to the manufacturer’s user manual or the Quick Start Guide of your TV model.
5
ENGLISH
Foot Stand Installation
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage.
n Install only with another person’s assistance.
n Make sure to distinguish between the front and back of the stand when assembling it.
2 Attach the foot stand as shown in the illustration and secure it by turning the stand
counterclockwise until a “click” is heard.
Open
Close
Disconnecting the Stand
1 Carefully place the TV screen side down on a cushioned surface to protect the screen from
damage.
2 Remove the screws and detach the stand from the TV.
Installing the LED TV requires special skill that should only be performed by qualified service
personnel. Customers should not attempt to do the work themselves. Hannspree bears no
responsibility for improper mounting or mounting that results in accident or injury. You can ask a
qualified service personnel about using an optional bracket to mount the TV to the wall.
6
ENGLISH
Installing the Wall Mount Kit
Wall mount items (sold separately) allow you to mount the TV on the wall. For detailed
information on installing the wall mount, see the instructions provided with the Wall Mount
items. Contact a technician for assistance when installing the wall mounted bracket.
Hannspree is not responsible for any damage to the product or injury to yourself or others if
you select to install the TV on your own.
n Do not install your Wall Mount Kit while your TV is turned on. It may result in
personal injury due to electric shock.
Model Name
VESA-compatible Mount holes
wall bracket (WxH)
number
Screw type
Maximum loading
SL22D
100x100 mm
4
Metric 4 x 12 mm
40 kg
SL24D
100x100 mm
4
Metric 4 x 12 mm
40 kg
1 Purchase a VESA compatible wall bracket
(please refer to the table above).
2 Locate your ideal TV position on the wall.
3 Fix the wall bracket firmly on the wall.
4 Secure the TV to the bracket using the 4
mount holes on the back and center of the
TV.
Securing the Installation Space
Keep the required distances between the product and other objects (e.g. walls) to ensure
proper ventilation. Failing to do so may result in fire or a problem with the product due to an
increase in the internal temperature of the product. Install the product so that the required
distances shown in the figure are kept.
n When using a stand or wall-mount, use parts provided by Hannspree only.
When installing the product with a stand
When installing the product with a wall-mount
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
10 cm
Note:
• Please read the instructions of your specific wall bracket to properly wall mount the TV.
7
ENGLISH
Control Panel
1
INPUT
2
3
4
5
6
No. Description
1
Power
2
Source
INPUT Press INPUT to display the input source list.
3
Menu
MENU
4
8
Button Function
Program select
5
Volume adjust
6
Remote IR sensor
Press to turn the TV on or off.
Press to turn the on-screen display (OSD) menu on /
off.
Press to increase the program number or move
upward to the previous item on the OSD menu.
During standby mode, press to turn the TV on.
Press to decrease the program number or move
downward to the next item on the OSD menu.
During standby mode, press to turn the TV on.
Press to increase the volume or move to the right on
the OSD menu.
Press to decrease the volume or move to the left on
the OSD menu.
Receive incoming remote control commands.
ENGLISH
Input and Output Jacks
Please refer to the front cover illustration for the Input & Output location.
No. Description
1
Connector
Function
Connect to a CI device.
CI
CI SLOT
2
Antenna
3
USB
4
Component Inputs
DTV/TV
CABLE/ANTENNA
USB
AV IN
Y Pb/Cb Pr/Cr
COMPONENT
5
SCART
SCART
6
VGA Audio Input
7
VGA (PC) Input
VGA
AUDIO
Connect to an antenna.
Connect to a USB device such as a USB
flash drive.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to an external device, such as a
VCR, STB, or a DVD player.
Connect to a PC’s line / audio port.
Connect to a PC’s VGA port.
VGA
8
HDMI Input
9
Earphone Output
10
Power Connector
HDMI
Connect an HDMI equipment or an HDMIDVI adapter cable to devices such as a
DVD player or set-top box.
Connect to earphones or external speakers
with built-in amplifier.
AC IN
Connect to the included power cord.
9
ENGLISH
Remote Control
16 Arrows
1 INPUT
Press to select the input
signal type selections.
1
Press / / /
to
navigate in the main menu,
to select menu options, to
set functions, and to change
values.
13
INPUT
2 Keypad
Press to select a program
directly. Press 0-9 to enter
the program numbers (press
1 and 0 for program 10).
3 Pro.LIST
Press to display channel list.
2
Pro.LIST
4
INFO
4 INFO
Press to display program
information (if available).
5 OK
Press to enter a submenu or
activate a setting.
14
MENU
OK
EPG
EXIT
8
VOL
18
P
I - II
TEXT
12
SUBTITLE
FREEZE
ASPECT
SLEEP
FAV.
PVR
19 19 Dual sound
Press to change the multi
sound selection of the TV
20
channel.
21
22
23 20 ASPECT
Press to select the picture
format.
8 Volume adjust
21 FREEZE
Press to pause a video frame
on-screen (only for TV input).
Press + to increase
audio volume. Press - to
decrease audio volume.
22 FAV.
9 Color buttons
Press the colored buttons to
perform specific tasks in the
OSD menu or teletext mode.
10 TEXT
to select a subtitle language
available for selected digital
TV program.
With an ATV source, if
teletext mode is activated
and the teletext has a
subtitle page, press to
display the subtitle page.
With a DTV source, press
Inserting Batteries
(Battery size: AAA)
Press to display stored
favorite channel list.
23 SLEEP
Press to set the sleep timer.
12 Media buttons
Press the control buttons to
perform specific tasks in the
TV or USB mode.
Press to toggle teletext on
or off.
11 SUBTITLE
Press p to increase the
program number. Press q
to decrease the program
number.
17
MUTE
Press to display detailed
9
programming information for
10
channels (only for DTV).
11
Press to toggle the sound
off and back on again.
15 17 EXIT
Press to exit the menu screen
or Teletext.
16
18 Select program
5
6
7
6 EPG
7 MUTE
can also be used to open the
corresponding submenu.
LAST
3
13
14
Teletext Functions
4
15
Power
10
Press to turn the TV on or off. 11
LAST
20
Press to return to the last
21
selected channel.
: Teletext reveal
: Teletext index
: Alternately select
Teletext, Double, or Mix
: Teletext subtitle
: Teletext size selection
: Teletext hold
15 MENU
Press to access the main
menu or to return to the
previous menu.
Notes:
• For best results, use the remote control within a proper distance from the
front of the TV. Do not exceed an angle of 30 degrees when pointing at TV.
• The operational distance may be shortened when the signal sensor is
directly exposed to strong light.
• Aim the transmitter on the remote control at the signal sensor and ensure
that there are no obstacles between them.
10
ENGLISH
2. Setting up your TV
Power Connection
1 Connect the power cord to the AC IN input jack on the rear of the TV.
2 Insert the plug at the other end of the power cord into a power outlet.
Rear Connections
See the illustration and table below for device connection instructions.
Connection Order
HDMI is the best way to connect a device. If it’s
not available, move down the list in order until
you find a connection that’s available on each
device.
HDMI
Component&AV
1
2
3
AC POWER
USB
SCART
1
DTV/TV
CABLE/ANTENNA
2
HDMI
VGA
AUDIO
VGA
HDMI
AV IN Y Pb/Cb Pr/Cr
COMPONENT
SCART
CI SLOT
Component&AV
Y
HDMI
VGA
HDMI
Use HDMI to connect
external devices when
available. If not available,
use Component.
3
VGA
AUDIO
AV IN Y Pb/Cb Pr/Cr
COMPONENT
(green)
Pb/Cb
(blue)
Pr/Cr
(red)
CVBS
(green)
L
(blue)
R
(red)
Use COMPONENT to connect with
the AV devices.
SCART
Antenna/Cable
Use this connection when you need to connect
directly to an antenna or cable system instead of
using a cable box.
SCART
USB
SCART
Use SCART to
connect with the
AV devices that are
equipped with the
SCART connectors
using the SCART
cable.
DTV/TV
CABLE/ANTENNA
Be careful not
to bend the
copper wire.
RF Coaxial Wire (75 Ω)
Antenna
Or
Cable
TV
11
ENGLISH
Using the TV
Turning the TV On and Off
1 Press
on the control panel or remote control to turn the TV on.
2 Press
again. The power LED turns red, indicating that the TV is off.
Running Setup Wizard
The Setup Wizard is displayed on the screen when you turn on your LED TV for the first time.
Note:
• Press p/q on the remote control to move through the menu. Press OK to select.
1 The Wizard appears to guide you
through the initial setup. Press OK to
start.
Initial Setup
Welcome
2 Select your backlight mode.
Initial Setup
Backlight Mode
Please select the backlight mode :
Home Mode
We lcome to use the Wizard for Initial Setup !!
Shop Mode
Please press [OK] to start the wizad.
t
Back
3 Select your language for the on-screen
display (OSD) menu.
Initial Setup
Language
Select
Next
Exi
Exit
Exit
4 Select your country.
Initial Setup
Country
Please select your country:
Please select your language:
English
Auseria
Hrvatski
Switzerland
Belgium
Czech Republic
Germany
Dansk
Back
Selec t
Next
Exit
Exit
5 Select Scan and press OK for channel
scan.
Initial Setup
Channel Scan
First, please connect antenna.
Back
Selec t
Next
Exit
Exit
6 The channel scan may take a while to
complete.
Initial Setup
Channel Scan
The channel scan may take a while to complete.
Start channel scan now?
If you skip this step, the channel scan could be performed in Menu.
Status: Scanning.
Analog channels: 0
Digital channels:0
Scan
Skip Scan
8%
Back
12
Selec t
Next
Exit
Exit
Exit
Cancel
ENGLISH
7 Press OK when initial setup is
completed.
Initial Setup
Complete
Congratulations !!
Completed Initial Setup.
Please press [OK] to exit the wizard.
Back
Selecting Your Content Source
You can watch cable or broadcast TV, play DVD or connect to your
PC.
Source
To select the source signal:
TV
• Press INPUT on the remote control. The Input Source menu
appears.
• Press p/q to highlight the desired source, then press OK to
confirm.
AV
Component
SCART
VGA
HDMI
USB
Performing an Automatic Channel Search
Before using the TV to view programs, you need to activate the channel search first.
1 Press MENU on the control panel or the remote control to enter the TV menu.
2 Select Channels > Channel Scan > Country.
3 Select your country and press OK.
4 Select the signal type.
5 Press OK/u on the remote control to run the channel search.
Selecting Channels
• Press P
or P
on the control panel or P p or P q on the remote control to increase
/ decrease the program number.
• Press the numeric buttons on the remote control.
13
ENGLISH
Setting Up Your Favorite Channels
1 Press FAV.
2 Press p/q to select empty item. Then press FAV to add current channel to favorite list.
n Press p/q to select the channel you want to delete. Then press FAV to remove the
channel from favorite list.
3 Press p/q to select the channel. Then press OK to enter the favorite channel.
4 Press Exit to exit.
Resetting to Factory Default Settings
1 Press MENU on the remote control to display the main menu.
2 Select Setup > Reset Default and press OK/u to enter its submenu.
3 Use the digit buttons to enter the password.
4 Press ◄/► to select OK and press OK to confirm.
5 The Initial setup menu appears. Follow the on-screen instructions.
Note:
• The default password is 0000.
14
ENGLISH
3. Adjusting On-Screen Display (OSD)
Settings
The On-Screen Display (OSD) menu system provides a quick and simple method to adjust
the TV settings. The OSD menu can be accessed conveniently through the buttons on the
remote control.
Before going into details of each OSD option, you may get acquainted with the placement of
the OSD system:
Main Menus:
Display the main menus.
Adjustable Options:
Display the setting/value of the adjustable
options.
Instructions:
Quick instructions for adjusting the
settings.
Function
OSD Menu
TV Control Panel
Remote Control
MENU
Menu
Up
P
Arrow p
Down
P
Arrow q
Select/ Increase
VOL +
Arrow u
Select/ Decrease
VOL -
Arrow t
Return
MENU
Menu
15
ENGLISH
On-Screen Menus Selection
Follow the instructions indicated on the left side of the OSD Function Menu.
• Press P
/P
on the control panel or p/q arrow keys to scroll through the menus.
• Press VOL + on the control panel or the u arrow key to enter a correspond submenu.
• Press VOL +/VOL - on the control panel or the t/u arrow keys to adjust the desired
setting.
• Press MENU on the control panel repeatedly or Exit to exit the OSD menu.
Video
Option
Description
Picture mode
Select a preset view option optimized for different viewing
conditions (Standard/Mild/Dynamic/User).
Brightness
Adjust the base level of the signal in the picture (0~100).
Contrast
Adjust the gradient of the video signal (0~100).
Saturation
Adjust the color intensity (0~100).
Sharpness
Adjust the sharpness or softness of the display (0~20).
Color temperature
Select the color temperature in the display
(Normal/Warm/Cool).
Advanced video
DNR
Reduce the noise level
(Strong/Auto/Off/Low/Medium).
MPEG NR
Reduce the light level
(Strong/Auto/Off/Low/Medium).
Active Contrast
Enable/Disable the Active Contrast feature (On/Off).
Backlight Mode
Automatic adjust the backlight mode setting based on your
current location (Home Mode/Shop Mode).
* This option will only appear when Active Contrast is set
to Off.
E-Sticker
Enable/Disable the E-Sticker function. E-Sticker is used
by dealers to display the TV banner or featured logo
on screen at an interval of 8 seconds for promotional
purposes (Off/On).
* This option will only appear when Active Contrast is set
to Off.
Video Preset
Reset all Video settings to the factory default settings (OK/
Cancel).
Note: The options available on the OSD may vary depending on the input signal
source.
16
Option
Description
Balance
Adjust the sound balance between the left and right
speakers (-50~50).
Bass
Adjust the audio bass setting in millisecond (0~100).
Treble
Adjust the audio treble setting in millisecond (0~100).
Sound Surround
Enable/Disable the Sound Surround feature (On/Off).
Sound Mode
Select a preset audio option optimized for different
sounding conditions (Rock/Pop/Live/Dance/Techno/
Classic/Soft/User).
Equalizer
Adjust the equalizer settings.
* This option will only appear when Sound Mode is set to
User.
Auto Volume Control
Select to automatically adjust the volume (Off/On).
Audio Preset
Reset all Audio settings to the factory default settings (OK/
Cancel).
ENGLISH
Audio
Note: The options available on the OSD may vary depending on the input signal
source.
TV
Option
Description
Channels
Channel Scan
Scan the channel search.
Analog manual
ATV Manual Tuning
scan
Digital Manual
Scan
DTV Manual Tuning
Favorite Network Select
Channel skip
Channel sort
Channel edit
Analog
Channel Fine
Tune
Adjust precisely the channel frequency to
ensure high signal quality.
* Only for ATV
Clean Channel List
Schedule List
Set the schedule settings.
Note: The options available on the OSD may vary depending on the input signal
source.
17
ENGLISH
Setup
18
Option
Description
OSD Language
Set the on-screen display language.
Aspect Ratio
Select the aspect ratio of the display
(16:9/4:3/Zoom1/Zoom2/Auto).
Blue Screen
Enable/Disable the Blue Screen function. If Blue Screen
is enabled, the screen will turn blue and the sound will be
muted when no signal is received (On/Off).
Time Setup
Time zone
Set the time zone
(As broadcaster/GMT +0:00/GMT +1:00//
GMT +2:00/GMT +3:00/GMT +3:30/GMT
+4:00/GMT +4:30/GMT +5:00/GMT +5:30/
GMT +5:45/GMT +6:00/GMT +6:30/GMT
+7:00/GMT +8:00/GMT +9:00/GMT +9:30/
GMT +10:00/GMT +11:00/GMT +12:00/
GMT +12:45/GMT +13:00/GMT -12:00/
GMT -11:00/GMT -10:00/GMT -9:00/GMT
-8:00/GMT -7:00/GMT -6:00/GMT -5:00/
GMT -4:00/GMT -3:30/GMT -3:00/GMT
-2:00/GMT -1:00).
Time
Set the clock settings.
- Auto synchronization (On/Off)
- Data (Only Auto synchronization On)
- Time (Only Auto synchronization On)
- Power On Timer (Off/On/Once)
- Timer (Only Power On Timer On/Once)
- Power On Channel (Only Power On
Timer On/Once)
- Power Off Timer (Off/On/Once)
Sleep timer
Set the timer to turn the TV off at the
preset time
(Off/10 Minutes/20 Minutes/30 Minutes/40
Minutes/50 Minutes/60 Minutes/90
Minutes/120 Minutes).
Auto Sleep
Set the TV to automatically turn off if it is
left idle at the preset time
(Off/3 Hours/4 Hours/5 Hours).
OSD Timer
Set the time to hide the on-screen
display (OSD) menu at the preset time
(5S/10S/15S/30S/45S/60S).
Subtitle
Enable/Disable the subtitle (On/Off).
Digital subtitle
language
Set the subtitle language for digital
broadcast.
ENGLISH
Subtitle
Digital subtitle
language 2nd
Subtitle type
Teletext
Select the subtitle type mode
(Normal/Hearing impaired).
Digital Teletext Set the subtitle language for digital
Language
broadcast.
Decoding page Set the decoding page language for
Language
teletext display.
First Time Installation
Erase all stored channels and run the Setup Wizard (OK/
Cancel).
Reset Default
Reset all TV operational settings to the factory default
settings (OK/Cancel).
Lock
Option
Description
Password
Enable/Disable the System Lock feature (On/Off).
Channel Block
Block any channels that you do not want
to watch or that you do not want your
children to watch.
* This option will only appear when
System Lock is set to On.
Program Block Enable/Disable the TV programs or
movies to be locked according to TV
rating setting.
* This option will only appear when
System Lock is set to On.
Change
Password
New Password
Clean All
Reset all Lock settings to the factory
default settings (OK/Cancel).
Confirm Password
Note:
• The default password is 0000.
• The Channel Block is only accessible in TV mode.
19
ENGLISH
Media Center Menu
Your TV is equipped with a USB connector that enables you to view photos, listen to music,
or watch videos stored on a USB storage device.
USB
DTV/TV
CABLE/ANTENNA
USB
Device
File Format
USB 2.0 device
USB memory, USB card reader
File System
FAT/FAT 32/NTSF
Photo file format
JPEG (*.JPG)
Music format
MPEG1 (*.MP3) Bitrate: 32k, 64k, 96k, 128k, 196k, 256k, 320kbps
Sampling frequency: 32k, 44.1k, 48kHz
Video file format
MPEG1/2 (*.AVI, *.MPG, *.MPEG, *.TS)
MPEG4 (*.AVI, *.MP4)
H.264 (*.AVI, *.MP4, *.TS)
Plug a USB device to the USB connector
on the TV. When this USB device is
detected, it enters the Media Center
menu directly.
Media Center
Photo
Select
Music
Video
OK
Enter
Text
Exit
Exit
Press the related buttons on the remote control to perform the available functions shown on
the function bar at the bottom of the TV screen.
20
ENGLISH
Time Shift Function
Allows you to record the TV program so that you won’t miss the favorite part even if you go
out. Before you use the function, connect a USB device to the TV first. For the first time, you
should do the disk setup for the USB device.
1 Switch the input source to DTV mode.
2 Press
to pause the picture and begin the time shift.
3 Press
to continue the program.
4 Press
to fast forward or press
shift file.
5 Press
SLEEP
FAV.
PVR
to rewind the time
to quit the time shift function.
Notes:
• Before you plug the USB device to TV, make sure you have backed up the data in the device to avoid unusual
performances make your important data lost.
• We recommend you use a USB device with the free file size bigger than 1Gb and disk speed faster than 5.0M/
sec.
• The bigger file size for the time shift, the longer you can record the program.
• If changing channel in time shifting, a message prompts to let you select Yes or No. You can select Yes to exit
the time shift function and execute the channel change.
PVR (Personal Video Record)
This function allows you to record your favorite TV program to a USB device.
1 Plug a USB device to the USB connector on the TV.
2 Press the red button to start recording. A PVR mini panel appears on the screen to indicate
the recording progress.
n Use p/q/t/u to adjust the recording duration.
n Press the green button to stop recording manually. Otherwise, the recording will stop
automatically when the recording duration is complete.
n The recorded file is saved into a PVR folder in Media Center > Video > pvr.
3 To watch the recorded program, exit the PVR mode first and switch to USB mode. Go to
Media Center > Video and select the desired recorded file in the PVR folder. Press OK to
play.
Notes:
• This function is only available for digital channels.
• This function only supports USB device of FAT32 format.
• Before you plug the USB device to the TV, make sure that you have backed up the data in the device to avoid
unusual performances that might cause data lost.
• The bigger storage size of the USB device for PVR function, the longer you can record the program.
• If you want to switch the channel or signal source during recording, it will prompt you whether to stop recording,
select OK if you want to save the recorded data. Then switch to a new channel or signal source.
• The TV can not play files normally if the file parameters exceed the system limitations, the file format is not
supported, the file is damaged, or the file can not be decoded.
• Do not unplug the USB device when the system is recording data or reading a file. This may cause system or
device malfunction.
21
ENGLISH
4. Troubleshooting
Situation
Solution
• Connect the power cord properly.
• Check if the power LED is on or not.
No picture and sound.
• Press
on the control panel or the remote control.
• Press INPUT on the remote control to select the
connected video sources.
• Press P
or P
on the control panel or P p or P q
on the remote control to switch to other TV programs.
• Make sure all cables are connected properly.
No picture, or poor picture,
sound is OK.
• Check the antenna and cable connections.
• Adjust the Brightness in the Video menu.
Picture is not in color.
• Try the Video Preset function in the Video menu.
Picture is OK, no sound.
•
•
•
•
One of the speakers has no
sound.
• Adjust the Balance in the Audio menu.
Cannot receive some TV
channels using cable TV.
• Try the Channel Scan function in the TV menu.
Want to reset TV settings.
• Use the Reset Default function in the Setup menu.
Cannot operate menus.
• If OSD items are colored in gray, the system is in a state
such that those settings are not available.
Screen image turns over.
• Make sure the video signal cable is connected properly.
Snow appears on the
screen.
• Adjust the location of the antenna, placing it far from
roads or sources of interference.
• Check the antenna and the video signal line connections.
Blurred or overlapped
images.
• Adjust the sharpness setting.
• Choose programs with high quality signals.
• Adjust the direction of the antenna or replace the video
signal cable.
•
•
•
Remote control doesn’t work. •
Make sure the source device is functioning properly.
Make sure the audio cable is connected securely.
Turn the mute off.
Press VOL + on the control panel or the remote control.
Make sure the battery is inserted correctly.
Replace the battery with a new one.
Make sure the TV power cord is plugged in.
Make sure the path between the remote control and the
sensor is clear.
• Try operating the remote control at a closer distance to
the TV.
22
ENGLISH
5. Support Timing
PC Mode Support Timing
Mode
Resolution
Frequency
SL22D
SL24D
1
640 x 480
60Hz
V
V
2
800 x 600
60Hz
V
V
3
1024 x 768
60Hz
V
V
4
1280 x 720
60Hz
V
V
5
1280 x 960
60Hz
V
V
6
1280 x 1024
60Hz
V
V
7
1360 x 768
60Hz
V
V
8
1440 x 900
60Hz
V
V
9
1680 x 1050
60Hz
V
V
10
1920 x 1080
60Hz
V
V
Video Mode Support Timing
Resolution (active dot)
HDMI/Component
480i
V
576i
V
480p
V
576p
V
720p
V
1080i
V
1080p
V
23
ENGLISH
6. Specifications
Model No.
SL22D
SL24D
DISPLAY
Screen Size
54.6cm/21.5 inches
60cm/23.6 inches
Aspect Ratio
16:9
16:9
1920 x 1080
1920 x 1080
Resolution
OSD Language
English, Spanish, French, German, Italian, Czech,
Danish, Hungarian, Dutch, Polish, Portuguese,
Romanian, Slovak, Swedish, Greek, Bulgarian,
Russian, Ukrainian
ENHANCEMENT
Sound Output (RMS Watts)
3W+3W
3W+3W
Sound Mode
Rock, Pop, Live, Dance, Techno, Classic, Soft, User
Picture Format
16:9, 4:3, Zoom1, Zoom2, Auto
Picture Mode
Standard, Mild, Dynamic, User
Rear Connectors
Earphone Output
PC IN: PC-RGB and PC Audio
Component Input
SCART
HDMI
CVBS audio input (Component share with CVBS)
Side Connectors
Tuner Input (ATV/DVB-T RF)
CI Slot
USB
CONNECTION
WEIGHT & DIMENSIONS
Product
With Stand
Dimensions
Without
(W x H x D mm) Stand
Net Weight
529 x 388 x 170
573 x 413 x 170
529 x 333 x 42
573 x 360 x 42
With Stand
4.2kg
4.8kg
Without
Stand
3.96kg
4.56kg
POWER
Main power - Operation (Max.)
Standby
Main Power
Ambient Temperature
24
40W
40W
< 0.5 W
110-240V~ 50/60Hz
5 ºC ~ 35 ºC
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement