VIA PCI IEEE 1394 Adapter
VIA PCI IEEE 1394 Adapter
User Manual
Ver. 4.00
All brand names and trademarks are properties of their
Respective owners.
Features and Benefits
z
VIA VT6306 chipset
z
PCI 32-bit 33MHz Interface
z
Compliant IEEE 1394-1995, 1394a (rev. 1.1) and OHCI Interface
Specification 1.0
z
Supports data transfer rates of 100, 200 and 400 Mbps
z
Hot-swapping features allows you to connect/disconnect devices
without powering down your system
z
Adds four IEEE 1394 (FireWire) ports to your PC for high-speed
I/O connectivity and support up to 63 devices
z
One (1) internal IEEE 1394 port (Sharing with first external
IEEE 1394 port P2)
z
Supports various brands of DV camcorders including Sony,
Panasonic, Canon, JVC, Sharp and more
z
Supports Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit
Connectors
z
2 x external IEEE 1394a 6-pin connectors
z
1 x external IEEE 1394a 4-pin connector
z
1 x internal IEEE 1394a 6-pin connector
MN2000000109 Page 2 System Requirements
z
Windows® 2000, XP/2003 32/64 bit, Vista 32/64 bit
z
Available PCI slot
Package Contents
z
1 x VIA PCI IEEE 1394 Adapter
z
1 x User’s Manual
Optional Accessories
z
IEEE 1394a Cable
z
Ulead Video Studio CD
Hardware Description
Before installing the VIA PCI IEEE 1394 Adapter, please see the photo
below highlighting the available IEEE 1394 ports of the card.
MN2000000109 Page 3 Note: The Internal Port (P1)) shares with first External
Port (P2). DO NOT use P1 and P2 at the same time.
Hardware Installation
1.
Turn Off the power to your computer.
2.
Unplug the power cord and remove your computer’s cover.
3.
Remove the slot bracket from an available PCI slot.
4.
To install the card, carefully align the card’s bus connector with
the selected PCI slot on the motherboard. Push the board down
firmly.
MN2000000109 Page 4 5.
Replace the slot bracket’s holding screw to secure the card.
6.
Replace the computer cover and reconnect the power cord.
Driver Installation
Windows® 2000/XP/Vista will automatically detect and install the
correct driver for the VIA PCI IEEE 1394 Adapter. Make sure that the
driver has been installed correctly, right click My Computer, then
click Manage, click Device Manager. The Device Manager window
opens. Scroll to the IEEE 1394 Bus host controller icon and click on
the plus symbol, the VIA OHCI Compliant IEEE 1394 Host
Controller should be displayed.
MN2000000109 Page 5 
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement