instruction manual - M-Edge
INSTRUCTION MANUAL
➏
➋
Product Features
➊
➎
➍
• Built-in wireless Bluetooth 3.0 keyboard
➌
• Compatible across iOS, Android, and Windows, enabling you to mix and
match with devices
®
• Ultra-thin, lightweight aluminum keyboard.
• Quiet key design
• Micro USB interface for convenient charging
• Moisture resistant and dust-proof keyboard design
• Energy-saving keyboard with self-activating sleep mode
➏
➏
Key
➊On/Off switch
➋Bluetooth Connect Button
(flashes when searching)
➍Micro USB Port
➎Operating System Toggle Keys
➏Foam Screen Protectors
➌LED Indicators
Keyboard Specification
Bluetooth Specification:
Standby Time: 100 days
Bluetooth® 3.0 interface standard
Charging Time: < 2hours
Operating Range: Up to 10 meters
Lithium Battery Capacity: 280mA
Modulating System:
Uninterrupted working time: 100 hours
Gaussian Frequency-Shift Keying (GFSK)
Lithium Battery Life: 3 years
Operation Voltage: 3.0-4.2V
Operation Current: < 2.5mA
3 EASY STEPS
Lithium Battery Specification:
3.8*20*35mm
Standby Current: < 0.3mA
1. Wrap the silicone mount around the device corners f or installation.
Keystroke Strength: 80±10g
Sleeping Current: < 40UA
2. Easily position or remove magnetic keyboard for desired viewing angle
Tablet and case can be used separately.
Keystroke life: 5 million strokes
Charging Current: ≥ 200mA
Operation Temperature: −10±55 C
3. Connect Bluetooth keyboard to your device.
®
Pairing Instructions (pair to iPad as example)
1. Turn on the power toggle switch. The [Power] and [ ] indicator light will be on
for 5 seconds and then go off.
2. Press on the [Connect] button, the indicator light [ ] will blink. The keyboard
is now ready to connect to your device.
3. Turn on and unlock iPad. Click on the iPad [Settings] icon.
4. On the setting menu, select item [General] to access [Bluetooth] turn on the
connection. iPad will automatically search for a Bluetooth-enabled device.
2. Connect the other end of the cable to a wall plug power adapter or computer
USB interface.
3. The indicator light [charge] will stay on red while the keyboard is charging.
Once it is fully charged, the power indicator light will shut off.
The Power Saving Mode
The keyboard will enter sleep mode after being idle for 15 minutes. To activate it from
sleep mode, press any key and wait 3 seconds.
5. Once the Bluetooth 3.0 keyboard has been identified, click on Bluetooth 3.0
keyboard to connect to your device.
Troubleshooting
6. Enter the random four digit password code as displayed on the screen on the
keyboard and hit enter.
Unable to connect
7. Once the Bluetooth keyboard has successfully connected to your device, the
indicator light [status] will be off.
Operating System Instructions
1. The default mode is for the iOS system. If you need to use it for android or
Windows, please shift it by pressing Fn key and W key for Android (or E key for
Windows) together before you start to type.
2. Please make sure your Android or Windows device is equipped with a
Bluetooth HID profile before pairing.
Charging Instructions
When the battery power is low, the indicator light [power] will start blinking. This
means that it is time to recharge the keyboard.
1. Connect the micro end of the USB power cable to the micro USB port on
the keyboard.
1. Check whether the power switch is on or not.
2. Verify that the keyboard is within the operating distance (the available
distance is 10 meters).
3. Make sure the battery is not depleted.
4. Ensure your device’s Bluetooth function is turned on.
5. Confirm the Bluetooth keyboard has been paired with your device.
Unable to Charge Keyboard
1. Identify if the USB power cable is connected properly to the keyboard and the
power source.
2. Check of the wall charger has plugged into power outlet.
Usage Tips
1. Do not place any heavy objects on top of the key board.
2. Do not knock or dismantle the keyboard.
3. Keep the keyboard away from oil, chemicals, and organic liquids.
• Reorient or relocate the receiving antenna;
4. Clean the keyboard with the water, alcohol, or an alcohol-based disinfectant.
• Increase the separation between the equipment and receiver;
5. Dispose of batteries according to local laws.
• Connect the equipment into an outlet on a circuit different from that to which
the receiver is connected;
Technical Support
For technical questions, please visit:
www.medgestore.com/about/contact/
• Consult the dealer or an experienced radio/TV technician for help.
Changes or modifications not authorized by the party responsible for compliance
could void the user’s authority to operate this product.
877-MEDGE-43 or 877-633-4343
Compliance with 21 CFR 1040.10 and 1040.11 except for deviations pursuant to
Laser Notice No. 50 dated June 24, 2007.
Regulatory Compliance
Battery Warning
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions. (1) This device may not cause harmful interference, and (2)
This device must accept any interference received, including interference that may
cause undesired operation.
You are cautioned that changes or modifications not expressly approved by the party
responsible for compliance could void your authority to operate the equipment.
FCC Statement
The equipment complies with FCC RF exposure limits set forth for an
uncontrolled environment.
Tested to Comply
This equipment has been tested and found to comply with the limits of a Class
B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed
to provide reasonable protection against harmful interference in a residential
installation. This equipment generates, uses, and can radiate radio frequency
energy and if not installed and used in accordance with the instructions, may cause
harmful interference to radio communications. However, there is no guarantee that
interference will not occur in a particular installation. If this equipment does not
cause harmful interference to radio or television reception, which can be determined
by turning the equipment off and on, the user is encouraged to try to correct the
interfere by one or more of the following measures:
RF exposure warning
The equipment must not be co-located or operating in conjunction with any other
antenna or transmitter.
MEDGESTORE.COM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement