Electro-Voice Mixer Amplifier MA-1206 Sales Manual

MA-1206 and MA-1212 Mixer Amplifiers

Sales Guide

MA-1200 Series Mixer/Amplifier Sales Guide

The MA-1200 series of professional rack mount mixer/amplifiers are designed for larger BGM/paging and public address system installations where expandability and flexibility is the ticket. These new units are exceptional values, loaded with features and are easy to install in a variety of system designs.

The MA-1206 provides a powerful 60 watts of output power into 70v/100v or 8 ohm loads. The MA-

1212 has the same feature set but supplies twice the power at 120 watts. Both models have a variety of features to enable them to be customized to a wide range of background music and paging applications.

The units feature 12 separate input channels. Input channels 1-10 are designed to be used as either balanced or unbalanced low-Z microphone inputs or they can be switched to a line level signal.

Phantom power is also available on any of the 10 inputs. A signal appearing at input 1 will automatically mute the other channels unless the mute function is defeated via a switch on the front panel. Inputs 11 and 12 are for auxiliary line-level sources such as tape or CD players. Mono or stereo signals may be applied to inputs 11 or 12. The left and right components of a stereo signal can be applied to the dual RCA phono jacks of these inputs and mixed together to drive the built-in monaural power amplifier. A rear panel paging input with gain control is provided for the paging output of a telephone system. An audio signal appearing at this input automatically mutes all other inputs.

A preamplifier output jack and power amplifier input jack permit the mixed output to be fed to an external signal processor (graphic EQ or compressor), and then returned to the built-in amplifier. The preamp output may be used to drive an additional power amp with its own set of speakers without interrupting the function of the built-in amplifier.

The speaker output is available at a barrier strip which includes terminals for driving low impedance loudspeaker loads, as well as 25, 70.7 or 100 volt distributed systems.

The KEY EV Advantages!

• 10 balanced mic or line inputs – All available with 24v phantom power!

• 2 Auxiliary stereo summing inputs with 4 level sensitivity adjustment.

• 60 or 120 watt models available

• Balanced line level output for adding additional power amplifiers.

• 24 volt powered operation available for emergency power requirements

• Adjustable level telephone paging input.

• Independently adjustable low power monitor output.

• Integrated ‘rack ears” allow for rack mounting without additional accessories.

Key markets and applications

• Warehouses

• Shopping malls

• Retail stores

• Churches

• Office lobbies

• Hotel conference rooms

• Dentist/Doctor waiting rooms

……And any other installation involving background music and paging.

Product Specifications:

Power Output (at 1 kHz):

Frequency Response:

Input Sensitivity/Impedance,

Inputs 1-10 Mic setting:

Inputs 1-10 Line setting:

Paging

:

Power Amp In:

Aux:

THD (at rated output):

Signal-to-Noise Ratio,

Mic :

.

Aux:

Paging:

Power Amp In:

Line Output Level/Impedance,

Preamp Output:

Balanced Line Output:

Speaker Outputs:

MA-1212

120 Watts

50 Hz - 15 kHz, ±3 dB

MA-1206

60 Watts

50 Hz - 15 kHz, ±3 dB

0.3 mV/600 ohm (balanced)

75 mV/47kohm (balanced)

-20 dBm/600 ohm (transformer isolated)

1 V/10 kohm (unbalanced)

100 mV to 1V/ (unbalanced)

<1% at 1 kHz

0.3 mV/600 ohm (balanced)

75 mV/47kohm (balanced)

-20 dBm/600 ohm (transformer isolated)

1 V/10 kohm (unbalanced)

100 mV to 1V/ (unbalanced)

<1% at 1 kHz

>52 dB

> 65 dB

> 65 dB

>90 dB

>52 dB

> 65 dB

> 65 dB

>90 dB

1 V/1 kohm (unbalanced) 1 V/1 kohm (unbalanced)

500 mV/47 kohm (unbalanced) 500 mV/47 kohm (unbalanced)

4, 8, 16 ohm, 25, 70.7 and 1004, 8, 16 ohm, 25, 70.7 and 100-

Volt Volt

Tone Controls,

Bass:

Treble:

Muting:

Protection :

Power Dissipation:

Power Supply:

+-10 dB at 100 Hz

+-10 dB at 10 kHz

40 dB attenuation

3 independent Slo-Blo

® fuses, primary ac and dc

390 watts

108-132 V ac, 50/60 Hz

+-10 dB at 100 Hz

+-10 dB at 10 kHz

40 dB attenuation

3 independent Slo-Blo

® primary ac and dc

250 watts

108-132 V ac, 50/60 Hz fuses,

Dimensions

Height: 15.0 cm (5.9 in.) 15.0 cm (5.9 in.)

Width: 48.0 cm (18.9 in.) 48.0 cm (18.9 in.)

Depth: 32.0 cm (12.6 in.) 32.0 cm (12.6 in.)

Net Weight: 12.0 kg (26.5 lb) 9.0 kg (19.9 lb)

Shipping Weight: 12.7 kg (28.0 lb) 9.7 kg (21.4 lb)

Mixer/Amplifier Competitive Comparison

Brand

Ultrak

Ultrak

Bogen

Ultrak

Ultrak

Bogen

Bogen

Bogen

EV

Bogen

Bogen

Bogen

Ultrak

EV

Bogen

Bogen

Bogen

Bogen

Model

KAA2035M

KAA2060M

C35

KAB2060M

KAB2120M

C60

GS35

CTS-1035

MA-1206

C100

CTS-1060

GS60

KAB2240M

MA-1212

GS100

CTS-1100

GS150

GS250

$112

$135

$207

$219

$249

$259

$259

$272

$299

$305

$323

$330

$343

$349

$376

$378

$433

$569

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

Y

3

2

2

3

2

2

3

2

2

2

2

2

2

2

3

3

2

2

Power

35

60

35

60

120

60

35

35

60

100

60

60

240

120

100

100

150

250

5

4

4

5

6

5

4

4

12

4

6

6

6

5

5

6

5

12

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

1

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

Com

TOA

TOA

A-912MK2

A-906MK2

Com

Com

1

1

8

8

60

120

3

3

Y

Y

$640

$720

As shown in the competitive comparison chart the new MA1206 and 1212 offer far more flexibility at the same price. The new units are a great addition to many system designs.