Owner`s Manual
CONTROL REFERENCE GUIDE
IMPORTANT SAFETY
INSTRUCTIONS
1.
2.
3.
4.
5.
6.
7.
Read these instructions.
Keep these instructions.
Heed all warnings.
Follow all instructions.
Do not use this apparatus near water.
Clean only with a dry cloth.
Do not block any of the ventilation
openings. Install in accordance with the
manufacturer’s instructions.
8. Do not install near any heat sources such
as radiators, heat registers, stoves, or
other apparatus (including amplifiers) that
produce heat.
9. Do not defeat the safety purpose of the
polarized or grounding - type plug. A
polarized plug has two blades with one
wider than the other. A grounding type
plug has two blades and a third grounding
prong. The wide blade or the third prong is
provided for your safety. When the provided
plug does not fit into your AC power outlet,
consult an electrician for replacement of
the obsolete outlet.
10. Protect the AC power cord from being
11.
12.
13.
14.
Remote Control
walked on or pinched particularly at plugs,
convenience receptacles, and the point
where they exit from the apparatus.
Only use attachments/accessories
specified by the manufacturer.
Use only with a cart,
stand, tripod, bracket, or
table specified by the
manufacturer, or sold with
the apparatus. When a
cart is used, use caution when moving
the cart/apparatus combination to avoid
injury from tip-over.
Unplug this apparatus during lightning storms
or when unused for long periods of time.
Refer all servicing to qualified service
personnel. Servicing is required when the
apparatus has been damaged in any way,
such as the AC power cord or plug is
damaged, liquid has spilled or objects
have fallen into the apparatus, the
apparatus has been exposed to rain or
moisture, does not operate normally, or
has been dropped.
1
2
3
4
The unit can playback
DVDs
[8cm/12cm disc]
5
6
Region Management Information
Region Management Information: This unit is designed and manufactured to respond to the Region
Management Information that is encoded on DVDs. If the region number printed on the DVD does
not correspond to the region number of this unit, it cannot play that disc.
The region number of this unit is 1.
7
8
8)
15
NEXT
14
STOP
GOTO
PAUSE
13
ENTER
ANGLE
MEMORY
12
11
10
DISPLAY
M
3
SUBTITLE/
RETURN
4
5
6
7
8
9
9)
9
0
SETUP
A-B
DISC
REPEAT
11)
1)
5)
Disc Function or Operation that is Not Available
Icons Used on DVDs
SEARCH
10)
6)
When the
symbol appears on the screen, it indicates that the function or operation attempted
is not available at that time. This occurs because the DVD manufacturer determines the specific
functions of DVDs. Certain functions may not be available on some DVDs. Be sure to read the
documentation provided with the DVD.
PREV
2
4)
Compatible
MENU
AUDIO
3)
Audio CDs
[8cm/12cm disc]
VIDEO
MODE
PLAY
2)
DISC FORMATS
7)
VIDEO MODE Button
Adjust Brightness, Panel Display and
Contrast of the LCD screen.
PREV Button
Move back through titles, chapters or tracks
on a disc.
/
SEARCH Buttons
SEARCH: Fast reverse playback.
SEARCH: Fast forward playback.
GOTO Button
Skip directly to a location on a DVD.
Cursor ( , , , ) Buttons
Use to move between selections on a
menu screen and adjust certain settings.
ENTER Button
Confirm selections on a menu screen.
MEMORY Button
Set titles/chapters in a favourite order.
12)
13)
14)
15)
Number (0 - 9) Buttons
Use when creating programs or locating a
title/chapter/track or specific time.
REPEAT A-B Button
Perform point-to-point repeat playback on
a DVD or CD.
REPEAT DISC Button
Repeat a DVD chapter or title.
Repeat a CD track or the whole disc.
SETUP Button
When a DVD is stopped, display the unit’s
SETUP menu.
SUBTITLE Button
Select one of the subtitle languages
programmed on a DVD (if available).
RETURN Button
Return to normal operation after using the
SETUP menu of a DVD.
AUDIO Button
Select one of the audio sound tracks on a
DVD (if more than one is available) or select
the audio output mode on an Audio CD.
ANGLE Button
Switche between multiple camera angles
when the DVD you are playing has been
programmed with multiple camera angles.
DISPLAY Button
Show status information on the screen.
STOP Button
Stop playing a disc.
PLAY Button
Start or resume playback of a disc.
PAUSE Button
Press once to pause playback. Press
subsequently to advance frame by frame
on a DVD.
NEXT Button
Move forward through titles, chapters or
tracks on a disc.
MENU Button
Enter and exit the main DVD menu.
B. Using the Car Power Adapter
1
Car Power Adapter
WARNING:
Disconnect the
car power adapter
when not in use.
Not for use in 24V
vehicles.
•
•
•
•
•
•
CAUTION:
2 To DC IN 9 -12V Jack
Press and hold
Press and hold
FUSE
Cautions:
Use the provided 12V car power adapter only. Use with other car power adapters could
damage the unit.
The 12V car power adapter included with this unit is for its use only. Do not use it with other
equipment.
In the interest of traffic safety, do not operate this unit or view videos while driving a vehicle.
Make sure the unit is securely fastened to prevent it from falling or flying through the air in
the event of an accident.
When the inside of the cigarette lighter socket is dirty with ashes or dust, the plug section may
become hot due to poor contact. Be sure to clean the cigarette lighter socket before use.
After use, disconnect the 12V car power adapter from both the unit and cigarette lighter socket.
The unit has a built-in, non-replaceable, rechargeable battery. Charge the built-in battery before
using it for the first time. The normal charging time should be completed within 4-5 hours. The green
charging light will go out when the built-in battery becomes fully charged.
1
•
Audio CDs are divided into “tracks”. A “track” is
usually one song on an Audio CD.
Unit
4 Charging
light ON
Title2
Chapter1
Chapter2
Chapter3
Chapter1
Chapter2
Track1
Track2
Track3
Track4
Track5
•
Dolby Digital
Dolby Digital is a technology developed by Dolby Laboratories. Soundtracks encoded in Dolby
Digital can reproduce from one to 5.1 discrete channels of excellent quality audio.
The unit automatically recognizes the Dolby Digital bitstream and provides a downmix suitable for
two-channel listening. An additional Dolby Digital decoder is required for reproduction of the discrete
multi-channel soundtracks available on many DVDs.
Manufactured under license from Dolby Laboratories.
'Dolby' and
the double-D symbol are trademarks of Dolby Laboratories.
ACCESSORIES
Please check and identify the supplied accessories.
• To order accessories visit website http://www.1800customersupport.com/audiovox
•
•
•
1)
2)
3)
4)
5)
6)
7)
8)
9)
10)
11)
LCD Screen
Built-in Rechargeable Battery
DC IN 9 -12V Jack
AUDIO / VIDEO OUT Jacks
CHARGE / STANDBY / ON Switch
VOLUME Control
Adjusts the volume.
Headphone Jack
Disc Door
Close tray by pushing the disc door.
Remote Sensor
Receive the remote control unit signals.
POWER ON Indicator
CHARGING Indicator
Charge the rechargeable battery before
using it for the first time. The normal charging
time should be completed in approximately
4-5 hours. The green charging light will go
out when the battery becomes fully charged.
12)
NEXT Button
Press to advance chapters / tracks.
PREV Button
Press to go back to the previous chapters
/ tracks.
PAUSE Button
Pauses playback of a disc. Each time you
press the
PAUSE button the picture
advances one frame. Press the
PLAY
button to resume playback.
PLAY Button
Starts or resumes playback of a disc.
STOP Button
Stops playing a disc.
SEARCH Button
Press to perform fast forward playback.
SEARCH Button
Press to perform fast reverse playback.
POWER SUPPLY
Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
Notes:
• When the built-in battery power is low, "BATTERY LOW" will display on the screen and the unit
will stop playing.
• Recharge the built-in battery when you are ready to use it again.
• While using the built-in battery, the environmental temperature should be 41°F (5°C) to 95°F (35°C).
• To get the longest service life of the built-in battery, charge at indoor-temperature.
• The built-in battery in this device may present a risk of fire or chemical burn if mistreated. Do not
disassemble, heat above 212oF (100oC), or incinerate.
• The unit should not be exposed to excessive heat such as sunshine, fire or the like.
• When discarding the unit, environmental problems must be considered and local rules or laws
governing the disposal of such products must be strictly followed.
Turning On the Unit
1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the
ON position.
2. The DVD logo (start-up picture) will appear on the screen.
3. After use, slide the CHARGE / STANDBY / ON switch to the STANDBY (power
off) position.
8x
2x
16 x
4x
8x
16 x
Press the
NEXT button to advance chapters/tracks.
Press the
PREV button to go back to current or previous chapters/tracks.
For an Audio CD, use the number buttons on the remote control to jump directly to the desired
track number.
If your TV has Audio/Video inputs, you can connect the
unit to your TV using a standard Audio/Video cable.
LEFT SIDE OF UNIT
Remove the PLASTIC
sheet before USING
the Remote Control.
LEFT SIDE OF UNIT
BATTERY REPLACEMENT
When the battery becomes weak,
the operating distance of the remote
control will be greatly reduced and
you will need to replace the battery.
Note: If the remote control is not going to be used for a long time, remove the battery.
WARNING: Do not dispose of the battery in a fire or it may leak and/or explode.
WARNING: Batteries shall not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION: Danger of explosion if battery is incorrectly replaced. Replace only with the same or
equivalent type.
L
AUDIO IN
1
TV
White
R
Red
To AC Power Outlet
White Red Yellow
To AUDIO / VIDEO
OUT Jacks
VIDEO IN
Yellow
AC Power Adapter
2 To DC IN 9 -12V Jack
Cautions:
• The AC power adapter included with this unit is for its use only. Do not use it with other equipment.
• When the unit is not going to be used for long time, disconnect the AC power adapter from
the AC power outlet.
• When the AC power adapter is plugged in, the apparatus is not completely disconnected from
the main power supply, even when the power is turned off.
Warning:
The AC power adapter is used as disconnect device and it should remain readily operable during
intended used. In order to disconnect the apparatus from the mains completely, the AC power
adapter should be disconnected from the mains socket outlet completely.
E-3
Audio 1/3:Dolby D 2ch English
2. Press the AUDIO button repeatedly to select the desired audio format.
Notes:
• If only one audio format is recorded on the DVD, the number does not change.
• Some DVDs allow you to change audio selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate language on the disc menu.
• You can select different audio channels (Stereo, Mono Left, Mono Right or Mix-Mono) on an
Audio CD by pressing the AUDIO button repeatedly.
Subtitle Selection
DVD
1. While a DVD is playing, press the SUBTITLE button to display the current language setting, as
shown in the example.
Subtitle 02/03:Spanish
2. Press the SUBTITLE button repeatedly to select the desired subtitle language. You can turn
subtitles off by pressing the SUBTITLE button repeatedly until the “ Subtitle Off ” is displayed.
Notes:
• Some DVDs are set to display subtitles automatically, and you cannot turn them off even if you
set the subtitle function to off.
• During some scenes, the subtitles may not appear immediately after you select your desired
scene.
• The number of subtitle languages recorded differs depending on the disc. If only one language
is recorded, the language does not change.
• This function can only be used for discs on which subtitles have been recorded in multiple
languages.
• Some DVDs allow you to change subtitles only via the disc menu. If this is the case, press the
MENU button and choose the appropriate subtitle on the disc menu.
DVD
Some DVDs contain scenes that have been shot from a number of different angles. For these
discs, the same scene can be viewed from each of these different angles.
The supplied AC power adapter operates on AC 120V.
Using the Remote Control
E-2
•
•
•
Angle Selection
A. Connecting a TV
A. Using the AC Power Adapter
REMOTE CONTROL
Warnings:
The built-in battery can only be recharged when the unit is in CHARGE mode while using the
AC adapter.
The built-in battery cannot be recharged when the unit is in power ON mode.
Do NOT recharge the built-in battery in a vehicle using the car power adapter.
CONNECTIONS
Remote Control (with battery) ................................................................................................. x 1
AC Power Adapter ................................................................................................................... x 1
Car Power Adapter .................................................................................................................. x 1
TO CHANGE REMOTE BATTERY
1. Open the battery door.
2. Insert one CR2025
(3V) size battery.
is completed
5 Recharging
when charging light goes out
the switch
3 Slide
to CHARGE
SOUND SYSTEM
•
4x
On some DVDs, the sound is recorded in two or more formats. Follow the directions below to select
the preferred language and sound system.
1. While a disc is playing, press the AUDIO button to show the current audio format number.
CHARGE STANDBY
ON
You may not be able to play some DVDs on this unit, particularly if they were purchased from outside
your geographic area or made for business purposes.
•
Press the
STOP button at the location where you want to interrupt playback. To resume
playback at the position where the disc was stopped, press the
PLAY button.
PLAY
If you press the STOP button twice, the unit’s memory will be cleared and pressing the
button will reset the DVD to the beginning.
Audio Selection
Notes on Unauthorized Discs
Point the remote control at the REMOTE SENSOR
located on the unit.
When using this unit in very bright light, the infrared
REMOTE SENSOR may not work properly.
The recommended effective distance for remote
operation is about 16 feet (5 meters).
Press the
PAUSE button. To resume normal playback, press the
PLAY button.
Each time you press the
PAUSE button, the picture advances one frame.
Skip (Forward / Reverse)
DC IN
2 To9-12V
jack
Note: Numbers identify each title, chapter, and track on a disc. Most discs have these numbers
recorded on them, but some do not.
•
Pausing Playback (Still Mode)
PLAY button when you reach the desired point to resume normal playback.
2. Press the
Notes:
• The DVD player mutes sound and subtitles during reverse and forward scan of DVDs.
• The fast playback speed may differ depending on the disc.
AC Power
Adapter
Region code indicator
Title1
1. Slide the CHARGE / STANDBY / ON switch on the left side of the unit to the ON position.
See CUSTOMIZING THE FUNCTION SETTINGS before proceeding to step 2.
2. Open the disc door.
3. Hold the disc by its sides and carefully place it onto the spindle with the
label side facing up, pushing gently until you hear a “click”.
4. Close the disc door. It takes a short while for your unit to load the disc.
After loading, the unit will automatically bring you to the main menu of
the DVD or start playing the DVD.
5. If the unit does not automatically start playing the DVD, press the
PLAY
button.
1. Press the SEARCH
or
SEARCH button when a disc is playing. Each time you press the
or
SEARCH button, the playback speed changes in the following sequence:
SEARCH
To AC power
outlet
Multiple camera angles
DVDs are divided into “titles” and “chapters”. If the
disc has more than one movie on it, each movie would
be a separate “title”. “Chapters” are sections of titles.
Playing a Disc
2x
Title, Chapter and Tracks
•
” means that the desired operation
Fast Forward / Fast Reverse
To Recharge the Built-in Battery
Screen aspect ratio
1
CD
Stopping Playback
C. Using the Built-in Battery
Language selections for subtitles
Note:
When playing back a CD-G (Graphics)
or CD EXTRA disc, the audio portion
will be played, but the graphic images
will not be shown.
“
” may appear on the screen during operation. A “
is not permitted by the unit or disc.
Fuse Replacement Instructions
For continued protection against
risk of fire, replace only with
same type and rating of fuse.
DVD
Basic playback
This owner’s manual explains the basic instructions for operating this unit. Some DVDs
are produced in a manner that allows specific or limited operation during playback.
Therefore, this unit may not respond to all operating commands. THIS IS NOT A DEFECT.
Please refer to the instructions accompanying the specific DVD in question for more
information about the options available on that DVD.
To Cigarette
Lighter Socket
Language selections for audio
Sample lcons
PLAYING A DISC
LEFT SIDE OF UNIT
The 12V car power adapter allows the unit to be used
with vehicles that have a 12V, negative ground
electrical system.
Audio / Video Cable
(not included)
Watching a DVD on your TV
1. Turn on the unit.
2. Turn on the TV and follow the instructions included with it to play the DVD.
LEFT SIDE OF UNIT
B. Using Headphones/Earphones
•
•
Turn down the volume before connecting, and
then adjust the level.
When headphones/earphones are connected, no
sound will be emitted from the unit's speaker.
Caution: Avoid listening to sound at levels
which may be harmful to your ears.
E-4
1. While you are playing a DVD with different angles
recorded, press the ANGLE button to view the
number of current angles available.
2. Press the ANGLE button repeatedly to change the
scene to the next recorded angle.
• After approx. two seconds, playback will continue
from the new angle selected.
• If no button is pressed within 10 seconds, playback
continues without changing the current angle.
(3.5mm diameter plug)
1 /3
2 /3
3 /3
Note: This function can only be used for discs on which scenes shot from multiple angles have been
recorded.
Display Function
DVD
While the disc is playing, press the DISPLAY button repeatedly to display information on operation
status.
Chapter Elapsed
Tt 01/03 Ch 03/12
0:13:26 Subtitle 02/03:Spanish
Audio 1/3:Dolby D 2ch English
Adjust the LCD Screen
Headphones/
Earphones
1
1/3
Sequence of angle shots
(Example)
Chapter Remain
Tt 01/03 Ch 03/12
0:05:42 Subtitle 02/03:Spanish
Audio 1/3:Dolby D 2ch English
Title Remain
Tt 01/03 Ch 03/12
0:36:08 Subtitle 02/03:Spanish
Audio 1/3:Dolby D 2ch English
DVD
You can adjust Brightness, Panel Display and Contrast of the LCD screen.
1. Press the VIDEO MODE button.
2. Press the
/
button to select Brightness, Panel Display or Contrast.
3. Press the
/
button to change the setting.
4. Press the VIDEO MODE button to exit the menu.
E-5
Display Off
REPEAT PLAYBACK
” indicator displays
Notes:
• If the title or chapter number entered is not permitted by the DVD, it will disappear. You should
re-enter correct number.
• You should input items one by one following the 1, 2, 3 ... sequence.
• If the DVD contains only one title, you can only arrange order for chapters.
• Some discs may not permit memory playback operation.
• If you select repeat during memory playback, the DVD player repeats the current memory playback.
• If you press the MEMORY button while the display appears on the TV screen, the display disappears.
• The programmed selections will be cleared when you press the STOP button two times, open
the disc tray or turn off the DVD player.
” indicator displays
VIEWING JPG FILES
DVD
You can play a specific title or chapter repeatedly. (Title repeat, chapter repeat, A-B repeat)
CD
DVD
Repeating a Chapter
1. While the DVD is playing, press the REPEAT DISC button until the “
on the screen. The current chapter is played repeatedly.
Chapter
” indicator displays
Repeating a Title
2. While the DVD is playing, press the REPEAT DISC button until the “
on the screen. The current title is played repeatedly.
Title
To Resume Normal Playback
3. While the DVD is playing, press the REPEAT DISC button until the “
on the screen.
Repeat Off
You can play a single track or the whole disc repeatedly.
Repeating a Single Track
1. While the CD is playing, press the REPEAT DISC button until the “
on the screen. The current track is played repeatedly.
Repeat One
” indicator displays
Repeating the Whole Disc
2. While the CD is playing, press the REPEAT DISC button until the “
on the screen. The whole disc is played repeatedly.
Repeat All
” indicator displays
To Resume Normal Playback
3. While the CD is playing, press the REPEAT DISC button until the “
Off
” indicator displays on the screen.
Repeating a Specific Section
You can play a specific section repeatedly.
1. While the disc is playing, press the REPEAT A-B button at the beginning of the section (“
is displayed) you want to play repeatedly.
AB ” is displayed).
2. Press the REPEAT A-B button again at the end of the section (“
3. The Unit will immediately begin replaying your selection.
A
”
To Resume Normal Playback
AB OFF ” indicator displays
4. While the disc is playing, press the REPEAT A-B button until the “
on the screen.
Notes:
• Some discs may not permit A-B repeat operation.
• You cannot set the A-B repeat function for a segment that includes multiple camera angles.
• You can specify a segment only within the current title or track.
• There may be a slight difference between point A and the location where playback actually
resumes depending on the disc.
LOCATING A DESIRED SECTION
DVD
Locating a Specific Chapter
If you know the chapter number for the chapter that you want to play, you can locate it by directly
selecting that number.
1. Press the GOTO button.
Title 01/03 Chapter 03/12
2. Press the corresponding number buttons (2 digits) for the chapter you want. (For example: 02,
08, 10 or 15.) (If you press only 1 numeric button, press the ENTER button to confirm.)
3. Playback starts from the selected chapter.
Notes:
• If the chapter number entered is not permitted by the DVD, " Input invalid " will display. You should
press the GOTO button again and re-enter correct number.
• Some discs may not respond to this process.
• This method of locating a chapter is available only on a DVD that contains chapter numbers.
Locating a Specific Title
If a DVD contains title numbers, you can locate a specific title by directly selecting its title number.
1. Press the GOTO button.
Locating a Specific Time
You can move to a specific location by entering its corresponding time (hours, minutes, seconds).
1. Press the GOTO button two times.
DVD PROGRAMMABLE MEMORY
You can combine your favourite titles/chapters and play them in the order you determine.
1. Press the MEMORY button while a DVD is playing, the following display appears.
1
Tt:01ch:05
6
Tt:
ch:
2
Tt:
ch:
7
Tt:
ch:
3
Tt:
ch:
8
Tt:
ch:
4
Tt:
ch:
9
Tt:
ch:
5
Tt:
ch:
10
Tt:
ch:
Clear
Exit
Start
Clear:
Exit:
Delete all the input programs.
Exit memory menu and return to
normal playback.
Start:
Start memory playback.
Next / Prev:Move to the the next / previous
setup page.
Next
2. Input the title (2 digits) and chapter (2 digits) by pressing the number buttons. (For example: 01
02, 02 05, 02 11.) It will move to the next item automatically.
• You can use the Cursor buttons ( , , , ) to move the highlighted bar to any item, and reenter the title and chapter. (Press the
NEXT /
PREV to move to the the next / previous
setup page.)
• You can use the Cursor buttons ( , , , ) to move the highlighted bar to “Clear”, “Exit”, “Start”
or “Next / Prev”, and press the ENTER button to confirm.
3. Press the
PLAY button to start memory playback. (“ Program ” appears on the screen.)
4. To resume normal playback from memory playback
1). Press the MEMORY button to display the memory menu.
2). Use the Cursor buttons ( , , , ) to move the highlighted bar to “Stop”. Press the ENTER
button to confirm “Stop”.
3). Press the ENTER button to confirm “Exit”. It will return to normal playback. (“ Program ” disappear
from the screen.)
E-6
•
•
Ensure the AC power adapter is connected.
The unit is not turned on.
The remote
control does not
function.
•
•
•
•
Make sure the infrared remote sensor is not blocked.
Make sure the plastic sheet has been removed from the remote control.
Point the remote directly at the infrared remote sensor on the unit.
Replace the battery in the remote control with a new one.
No sound or only
a very low-level
sound is heard.
•
•
PVD80
•
Viewing JPG Files
•
•
•
No picture.
•
The region number of the disc doesn't match the region number of this unit.
The picture is not
clear.
•
•
•
Clean the disc.
The disc is scratched.
Adjust the LCD's brightness and contrast using the VIDEO MODE button
on the remote control.
Severe hum or
noise is heard.
•
The plugs and jacks are dirty. Wipe them with a cloth slightly moistened with
alcohol.
Clean the disc.
1. Open the disc door.
2. Hold a JPG file disc by its edges and gently push it
onto the spindle with the label side facing up until you
hear a “click”.
3. Close the disc door. The JPG files on the disc will be
displayed one by one automatically.
4. Press the MENU or STOP button to display a folder
list. Press the / button to highlight a JPG file to
PLAY button to start playback.
play. Press the
00:00 00:00
001/035
\
DSCN0281
DSCN0282
DSCN0283
DSCN0284
DSCN0285
DSCN0286
Notes:
• You can press the PAUSE button to freeze the picture. Press the
PLAY button to resume
picture slide show.
• You can press the
STOP button to quit playback.
PREV or
NEXT button to change the picture.
• You can press the
• You can press the ANGLE button to rotate direction of the picture by 90o.
• Some discs may not permit this operation.
•
The disc does not
play.
•
•
•
•
•
CUSTOMIZING THE FUNCTION SETTINGS
There is no disc inside (“No Disc” appears on the screen).
Insert the disc correctly with the playback side facing down.
Clean the disc.
A non-NTSC disc has been inserted. The unit and disc region number are
incompatible.
Condensation may have formed inside the unit due to a sudden change
in temperature. Wait about an hour for it to clear and try again.
D I G I TAL
PHOTO
8” Portable
DVD Player
Owner’s Manual
SAFETY PRECAUTIONS
WARNING: TO REDUCE THE RISK
OF ELECTRIC SHOCK, DO NOT REMOVE
COVER (OR BACK). NO USER-SERVICEABLE
PARTS INSIDE. REFER SERVICING TO
QUALIFIED SERVICE PERSONNEL.
The lightning flash with an arrowhead
symbol, within the equilateral triangle, is
intended to alert the user to the presence
of uninsulated "dangerous voltage"
within the product's enclosure that may be of
sufficient magnitude to cause an electric shock.
The exclamation point within the
equilateral triangle is intended to alert
the user to the presence of important
operating and maintenance (servicing)
instructions in this owner’s manual.
* SEE BOTTOM OF UNIT FOR GRAPHIC SYMBOLS *
Language Setup
1. Press the SETUP button in stop mode.
Video
System
Language
button to select Language Setup
2. Press the
Page.
- - Language Setup Page - 3. Press the / button to select the option (OSD
Eng
OSD Language
Language, Audio, Subtitle or Disc Menu), then
Eng
Audio
button.
press the
Off
Subtitle
Eng
Disc Menu
4. Press the
/
button to select your preferred
language, then press the ENTER button to
confirm.
5. Repeat steps 3 and 4 to adjust other options.
Press the button to return to the previous menu.
Go To Language Setup Page
6. Press the SETUP or RETURN button to exit the
menu.
Notes:
• Some DVDs may not play in the audio language selected. A prior language may be programmed
on the disc.
• Some DVDs may be set to display subtitles in a language other than the one you selected. A
prior subtitle language may be programmed on the disc.
• Some DVDs allow you to change subtitle selections only via the disc menu. If this is the case,
press the MENU button and choose the appropriate subtitle language from the selection on the
disc menu.
• Some DVDs may not include your pre-selected language. In this case, the DVD player
automatically displays disc menus consistent with the disc's initial language setting.
Video Setup
1. Press the SETUP button in stop mode.
2. Press the
/
button to select Video Setup
Page.
3. Press the
/
button to select the option
(Brightness or Contrast), then press the button.
4. Press the / button to adjust the setting, then
press the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options.
Press the button to return to the previous menu.
6. Press the SETUP or RETURN button to exit the
menu.
Video
Language
System Setup
1. Press the SETUP button in stop mode.
2. Press the
/ button to select System Page.
3. Press the
/
button to select the option (TV
Display or Default), then press the button.
4. Press the
/
button to adjust the settings,
then press the ENTER button to confirm.
5. Repeat steps 3 and 4 to adjust other options.
Press the button to return to the previous menu.
6. Press the SETUP or RETURN button to exit the
menu.
LIMITED WARRANTY
VENTURER ELECTRONICS ("VENTURER") makes the following limited warranty. This limited
warranty extends to the original consumer purchaser and is limited to non-commercial use of the
product.
Ninety (90) Day Parts & Labor Warranty
VENTURER products purchased in the United States are warranted to be free from defects in
materials or workmanship for a period of ninety (90) days from the date of their original retail
purchase. If the unit fails to conform to this warranty, we will service the product using new or
refurbished parts and products, at VENTURER's sole discretion.
During a period of ninety (90) days from the effective warranty date, Venturer will provide, when
needed, service labor to repair a manufacturing defect at its designated Service Center. To obtain
warranty service in the United States, you must first call our Customer Support Center at
(800) 252-6123, during the hours listed in the box below. The determination of service will be
made by VENTURER Customer Support. PLEASE DO NOT RETURN YOUR UNIT TO VENTURER
WITHOUT PRIOR AUTHORIZATION. New or remanufactured replacements for defective parts or
products will be used for repairs by Venturer at its designated Service Center for ninety (90) days
from the effective warranty date. Such replacement parts or products are warranted for an
additional ninety (90) days from the date of repair or replacement. The Customer will be required
to ship the unit to the Service Center indicated at the time Customer Support is contacted to make
the necessary repairs. The customer is responsible for all transportation charges to the service
facility.
Brightness
Contrast
(1) You must retain the original sales receipt to provide proof of purchase.
(2) These warranties are effective only if the product is purchased and operated in the U.S.A. or
Canada.
(3) Warranties extend only to defects in material or workmanship, and do not extend to any product
or parts which have been lost or discarded, or damage to product or parts caused by misuse,
accident, improper operation or maintenance, or use in violation of instructions provided with
the product, or to product which has been altered or modified without authorization of VENTURER,
or to products or parts thereof which have had the serial number removed or changed.
Go To Video Setup Page
Video
Language
System
- - System Page - Tv Display
Default
Out of Warranty
Go To System Page
Cut off when a wide-screen
video image is played.
Pan Scan
• When wide-screen video is played, this mode clips the right and left
sides of the image so that it can be viewed on a conventional screen.
• Some wide-screen DVDs that do not permit Pan Scan mode playback
are automatically played in letterbox mode (black bands that appear
at the top and bottom of the screen).
Letter Box
• When wide-screen video is played in this mode on a conventional
screen, black bands appear at the top and bottom of the screen.
Wide Screen
• This is the correct mode for playing wide-screen videos on the unit
screen or other external wide-screens.
Notes:
• The displayable picture size is preset on the DVD. Therefore the playback
picture of some DVDs may not conform to the picture size selected.
• When you play DVDs recorded in the 4:3 aspect ratio, the playback
picture will always appear in the 4:3 aspect ratio regardless of the TV
display setting.
• Select Wide Screen to conform the LCD screen on the unit. Always be
sure that your TV display conforms to the actual TV in use if you connect
the unit to a TV.
Pan Scan
All warranties implied by state law, including the implied warranties of merchantability and fitness
for a particular purpose, are expressly limited to the duration of the limited warranties set forth
above. With the exception of any warranties implied by state law as hereby limited, the foregoing
warranty is exclusive and in lieu of all other warranties, guarantees, agreements and similar
obligations of manufacturer or seller with respect to the repair or replacement of any parts. In no
event shall VENTURER be liable for consequential or incidental damages.
No person, agent, distributor, dealer or company is authorized to change, modify or extend the
terms of these warranties in any manner whatsoever. The time within action must be commenced
to enforce any obligation of VENTURER arising under the warranty or under any statute, or law
of the United States or any state thereof, is hereby limited to ninety (90) days from the date of
purchase. This limitation does not apply to implied warranties arising under state law.
This warranty gives you specific legal rights and you may also have other rights, which may vary,
from state to state. Some states do not allow limitation on how long an implied warranty lasts, when
an action may be brought, or the exclusion or limitation of incidental or consequential damages,
so the above provisions may not apply to you.
For more information on other products and services, please visit our web site at
www.1800customersupport.com/audiovox
Important: Also keep your "Bill of Sale" as proof of purchase.
•
•
Serial no. ........................................................... Invoice no. ........................................................
•
E-7
When connecting or disconnecting the AC power adapter, grip the plug and not the cord itself.
Pulling the cord may damage it and create a hazard.
When you are not going to use the unit for a long period of time, disconnect the AC power adapter.
When left in a heated room where it is warm and damp, water droplets or condensation may form
inside the unit. When there is condensation inside the unit, the unit may not function normally.
Let the unit stand for 1 to 2 hours before turning the power on, or gradually heat the room and
allow the unit to dry before use.
Rating Plate Location
WARNING: Should any trouble occur, disconnect the AC power adapter and refer servicing
to a qualified technician.
Notes on Copyright
It is forbidden by law to copy, broadcast, show, broadcast on cable, play in public, or rent copyrighted
material without permission.
Apparatus Claims of U.S. Patent Nos. 4,907,093; 5,315,448; and 6,516,132 licensed for limited
viewing uses only.
This product incorporates copyright protection technology that is protected by U.S. patents and
other intellectual property rights. Use of this copyright protection technology must be authorized
by Macrovision, and is intended for home and other limited viewing uses only unless otherwise
authorized by Macrovision. Reverse engineering or disassembly is prohibited.
MAINTENANCE
Cleaning the Disc
A defective or soiled disc inserted into the unit can cause sound to drop out during playback.
Handle the disc by holding its inner and outer edges.
• Do NOT touch the surface of the unlabeled side of the disc.
• Do NOT stick paper or tape on the surface.
• Do NOT expose the disc to direct sunlight or excessive heat.
• Clean the disc before playback. Wipe the disc from the center outward with a
cleaning cloth.
• NEVER use solvents such as benzine or alcohol to clean the disc.
• Do NOT use irregular shaped discs (example: heart shaped, octagonal, etc.). They may cause
malfunctions.
•
•
•
Specifications and external appearance are subject to change without notice.
Printed in China
The rating plate is located on the bottom of the unit.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device,
pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection
against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may
cause harmful interference to radio communications. However, there is no guarantee that interference
will not occur in a particular installation. If this equipment does cause harmful interference to radio or
television reception, which can be determined by turning the equipment off and on, the user is
encouraged to try to correct the interference by one or more of the following measures:
– Reorient or relocate the receiving antenna.
– Increase the separation between the equipment and receiver.
– Connect the equipment into an AC power outlet on a circuit different from that to which the receiver
is connected.
– Consult the dealer or an experienced radio/TV technician for help.
WARNING: Changes or modifications to this unit not expressly approved by the party responsible
for compliance could void the user's authority to operate the equipment.
Date purchased ............................................... Dealer name .....................................................
Wide Screen
Do not use the unit in places that are extremely hot, cold, dusty, or humid.
Do not restrict the air flow of the unit by placing it in a place with poor air flow, by covering it with
a cloth, or by placing it on carpeting.
On Condensation
FOR SERVICE AND REPAIR, PLEASE VISIT www.1800customersupport.com/audiovox
It takes 3-5 seconds to reset the DVD settings to the factory default.
WHEN OPEN.
AVOID EXPOSURE TO BEAM.
Cleaning the Unit
Letter Box
Default
CAUTION
On Safety
www.1800customersupport.com/audiovox.
Hours: Monday-Thursday: 9-7, Friday: 9-5, Saturday: 9-12 EST.
Important:
You are responsible for any transportation, shipping or insurance relative to the return of
product to our Product Returns Center.
TV Display
•
•
In the event your product requires repair after the limited warranty period has expired,
please contact our Customer Support Center at 1-800-252-6123 or
Wide
No
CAUTION: DANGER OF EXPLOSION IF
BATTERY IS INCORRECTLY REPLACED.
REPLACE ONLY WITH THE SAME OR
EQUIVALENT TYPE.
On Placement
FCC Statements
LIMITED WARRANTY
CAUTION: USE OF CONTROLS OR
ADJUSTMENTS OR PERFORMANCE OF
PROCEDURES OTHER THAN THOSE
SPECIFIED MAY RESULT IN HAZARDOUS
RADIATION EXPOSURE.
THIS CLASS B DIGITAL APPARATUS COMPLIES
WITH CANADIAN ICES-003.
•
Your Responsibility
WARNING: TO PREVENT FIRE OR SHOCK
HAZARD, DO NOT EXPOSE THIS
APPLIANCE TO RAIN OR MOISTURE. DO
NOT PLACE OBJECTS FILLED WITH
LIQUIDS ON OR NEAR THIS UNIT.
INVISIBLE LASER RADIATION
When you send the product to the Venturer service facility you must use the original carton box
and packing material or an equivalent as designated by VENTURER.
System
00
00
This product
contains a low
power laser device.
Packaging and Shipping Instruction
- - Video Setup Page - -
DVD
Playing TItles/Chapters in a Favourite Order
CAUSE (AND REMEDY)
No power.
This unit can play JPG files recorded on a CD-R or CD-ROM disc (CD-RW is not recommended).
Title 01/03 Time : :
2. Press the corresponding number buttons (5 digits: X:XX:XX, for example: 0 30 05, 1 08 23, 1
22 56.) for the setting point you want.
3. Playback starts from the selected section.
Notes:
• If the time entered is not permitted by the DVD, " Input invalid " will display. You should re-enter
correct time.
• Some discs may not respond to this process.
• Some scenes may not be located as precisely as you specified.
• This method for accessing specific locations is available only within the current title of the DVD.
SYMPTOM
Make sure ON mode is selected.
The system is in pause mode. Press the
PLAY button to return to normal
play mode.
The unit is in fast-forward or fast-reverse mode. Press the
PLAY button
to return to normal play mode.
Make sure the AUDIO/VIDEO output connections are correct.
The DTS DVD cannot be decoded to have speaker output.
The unit is too hot; shut off the unit for 30 minutes to cool it down.
Title 01/03 Chapter 00/00
2. Press the / button to highlight title number, press the corresponding number buttons (2 digits)
for the title you want. (For example: 02, 08, 10 or 15.) (If you press only 1 numeric button, press
the ENTER button to confirm.)
3. Playback starts from the selected title.
Notes:
• If the title number entered is not permitted by the DVD, " Input invalid " will display. You should
repeat steps 1 and 2 to re-enter correct numbers.
• Some discs may not respond to this process.
• This method of locating a title is available only on a DVD that contains title numbers.
TROUBLESHOOTING GUIDE
811-338791W010
Be sure to turn the unit off and disconnect the AC power adapter before maintaining the unit.
Wipe the unit with a dry soft cloth. If the surfaces are extremely dirty, wipe clean with a cloth that
has been dipped in a weak soap-and-water solution and wrung out thoroughly, then wipe with
a dry cloth.
Never use alcohol, benzine, thinner, cleaning fluid or other chemicals. Do NOT use compressed
air to remove dust.
Important Note
•
Before transporting the unit, remove the disc from the disc compartment.
E-1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement