under 15 minutes under 30 minutes under 60 minutes Basic Installation Guide 1 p e t S Hand Tools Time Set up Your DIGITAL VIDEO RECORDER First Under 10 Minutes* Hi Speed Skills - Easy Router easy Plug & Play connectors, On screen set up Hand Tools * Installation time may vary based on application and camera cabling Skill Level Hardware Tools over 60 min Skill Level * NOTE: Test the cameras prior to selecting a permanent mounting location by temporarily connecting the Cameras and Cables to your DVR. 5 OPT Connect a CCTV monitor to the Monitor OUT (Composite OUT) port to view camera images. 2 Connect one end of the ethernet cable to one of the router’s (not included) LAN PORTS and the other end to DVR’s Network Port located at the back of the DVR. See picture below showing a generic LAN/WAN connection. WAN (WIDE AREA NETWORK) BACK OF THE ROUTER TO YOUR MONITOR TO YOUR COMPUTER advanced Digital Video Recorder* NAVIGATION CONTROLS: Virtual Keyboard Control: The Virtual Keyboard control becomes available when keyboard input (A~Z, 0~9) is needed for entering information such as Names, Network Information, etc. Connect Power Cable: Connect one end of the Power cable to the DVR, the other end to an electrical outlet. This unit powers ON once it is plugged in to the power outlet. DVR FRONT PANEL - POWER BUTTON 4 Intermediate easy Connect Ethernet Cable: LAN (LOCAL AREA NETWORK) 3 To view the video from your DVR on a PC monitor, connect the VGA Connector Cable from the PC Monitor to the VGA Port located at the back of the DVR. AL Connect the first camera to the CH1 input. Follow the same steps to connect the additional cameras*. Connect PC Monitor (not included) to DVR VGA Output: ION 1 Connect Cameras & Monitor (not included) to the DVR: PUSH THE POWER BUTTON TO Turn ON the DVR • Navigate using the arrow keys on the Front Panel or Remote Control. • Use the ENTER key to choose the letters and numbers. • Select the APPLY button once the setup is completed. DVR Menu - Navigation Controls: MAKE SURE THAT THE DATE AND TIME ARE SET PRIOR TO RECORDING! *** Note: If the Date/Time is set into the past, a message will appear warning that Overlapped date(s) will be erased. Congratulations! You have completed STEP 1 successfully. Your DVR is now ready to use. Refer to the owner’s manual to learn how to record, playback, use the search features and all other features available with this system. Return Button: Complete modifications of a menu option; exit a menu Navigation Controls: Move UP/DOWN/ LEFT/RIGHT Enter Button: Press this button to select and change the values in a menu option Set the Time and Date***: Click the MENU button from the front panel of the DVR (or the remote control) to enter SYSTEM SETUP and press ENTER to go to MAIN MENU. From the MAIN MENU Scroll down to SYSTEM and press ENTER to go to the DATE/TIME MENU. Press ENTER while on DATE/TIME MENU to activate menu options. Broadband Router and Computers are Required (for local and remote monitoring), not Included. Active Option Indicator: USB Ports: Orange Highlight - Indicates that the option is in active editing mode. Provides connection ports for USB Flash Drives (thumbsticks), USB Hard Drives and Optional Mouse (not included). Green Highlight - Indicates that the option is available for editing. Once the option is highlighted, press the ENTER key to edit the option (hightlight changes to Orange). For detailed setup information, please refer to your User’s Manual. *Channel/ Port configuration and HDD (hard disk drive) capacity may vary by model. Check your package for specific content information. Refer to Step 3 for Setting Up Remote Security Monitoring. Information in this document is subject to change witho ut notice. As our products are subject to continuous improvement,Digimerge Technologies Inc. reserves the right to modify product design, specifications and prices, without notice and without incurring any obligation. E&OE © 2007 . Digimerge - All rights reserved. DHU500R Series Quick Start Guide_R1 Page www.digimerge.com I under 15 minutes under 30 minutes under 60 minutes over 60 minutes Router Basic Installation Guide 2 p e t S Time Hand Tools Hardware Hardware Under 30 Minutes* Set up Local Viewing on your PC * Installation time may vary based on application Hi Speed Skills - Intermediate Skill Level Computer Router & Router* easy Plug & Play connectors, Intermediate On screen set up * Minimum System Requirement: Windows XP, Pentium IV, 256MB Ram (512MB Recommended), 200MB Storage, Internet, DSL or Cable Modem Skill Level Your DVR must be connected to a Router prior to powering it ON 1 Retrieve System Information: To retrieve the System Information, press the ENTER button on the Remote Control (ensure batteries are inserted) (OR) Press the ENTER button on the front panel of the Monitor (please check the user’s manual for MENU steps). easy REMOTE CONTROL DVR FRONT PANEL - ENTER BUTTON 3 DigiClient Software: 4 DigiClient Software: Intermediate advanced (on your Local Computer) Follow the installation screens to complete DigiClient Software installation. Record the IP and MAC Addresses in the section below: IP ADDRESS : . MAC ADDRESS : . : : . : : : (needed to register for DDNS) (on your Local Computer) Close the CD Menu Screen. A DigiClient icon and a DigiPlayer icon will appear on your desktop. DigiClient 2 DigiPlayer Install Software: (on your Local Computer) Insert the DigiClient Software CD into your local computer’s CD ROM drive and proceed with installation. 5 Run the DigiClient Software: (on your Local Computer) Double-click the DigiClient software icon on your desktop to run the program. DigiClient On your Local Computer COMPUTER - NOT INCLUDED DHU500R Series Quick Start Guide_R1 Page www.digimerge.com ad 2 p e St ed u tin n Co Set up Local Viewing on your PC Set-up: 6 (on your Local Computer) Click the Setup icon from the DigiClient Software Screen 9 SET-UP BUTTON DigiClient Software - Local Configuration: (on your Local Computer) From the DigiClient Software - Local Configuration screen (as shown in Step 7), select the new Group you created using the drop down menu (1) and press the CONNECT button (2) to connect to the LOCAL LIVE site. 1 2 Add ‘Group’: 7 (on your Local Computer) CONNECT BUTTON Click on the SITE listing on the Left Panel, and Right Click to ‘ADD GROUP’. Enter a name for the GROUP, and click OK. OFFICE Enter Setup Information: 8 (on your Local Computer) Select the GROUP you created and enter SETUP information. 6 System 1 2 3 4 5 6 192.168.0.150 6100 ADMIN **** 7 8 1. Enter a Name for the System 2. Enter the IP Address recorded in Step 2-1 3. Enter the DVR TCP/IP port (6100 by default) 4. Enter the User ID (ADMIN by default), max. 5 characters 5. Enter the Admin Password (1234 by default) * User ID and Password are case sensitive 6. Add cameras using the dropdown menus to assign camera positions 7. Click ADD to add the System Location 8. Click OK LOCAL LIVE SITE Camera Selection Dropdown Menu DHU500R Series Quick Start Guide_R1 Page www.digimerge.com under 15 minutes under 30 minutes under 60 minutes over 60 minutes Router 3 p e t S REMOTE VIEWING INSTALLATION GUIDE Time Time Set up Internet Remote Security Monitoring under 15 minutes under 30 minutes Hand Tools 1 Hardware Hi Speed Skills - Advanced Computer Router & Router* 60 Minutes easy under 60 minutes over 60 minutes * Installation time may vary based on application Router Port forward your router first before proceeding with the set-up (you must forward web port 80 and TCP/IP Port 6100). Skill Level A Router Configuration Guide is available on your Digi Client Software CD. easy 3 Hardware Hardware Skill Level Intermediate Basic Computer Skills, advanced Router Port Forwarding * Minimum System Requirement: Windows XP, Pentium IV, 256MB Ram (512MB Recommended), 200MB Storage, Internet, DSL or Cable Modem Skill Level Hi Speed Port Forward Your Router: All routers are different. To port forward your router, please refer to your router’s user’s manual. 2 Hand Tools DDNS Set-up: Open your web browser (Internet Explorer by default) and enter http://ddns.digimerge.net in the address bar. http://ddns.digimerge.net 4 easy Intermediate advanced Complete New Account Information: 1. FOR PRODUCT LICENSE select the DHU500R Series option from the drop down menu. 2. FOR PRODUCT CODE enter the DVR’s MAC address (recorded in step 2, section 1). Intermediate 3. FOR URL REQUEST advanced enter a unique URL name (e.g. tomsmith1). Note: URL name should not be more than 15 characters. 5 Registration Email: 6 Enter DDNS Set-up on your DVR: An automated REGISTRATION CONFIRMATION EMAIL will be sent to your email. Print and Save this confirmation. You will need this information to access your System remotely. 1 3 2 Service Provider: dns1.digimerge.net Domain Name: tomsmith.digimerge.net User ID: tomsmith1 Password: (your password) Create Account: From the http://ddns.digimerge.net website, click the CREATE ACCOUNT option. Create Account Enter DDNS SET option on your DVR by pressing the MENU button on the front panel of your DVR (or Remote Control). Select the SYSTEM SETUP and press ENTER. Scroll down to SYSTEM and press ENTER. Scroll down to NETWORK option and press ENTER. DVR FRONT PANEL - SETUP BUTTON DHU500R Series Quick Start Guide_R1 Page www.digimerge.com 3 p e St ed u tin n Co Set up Internet Remote Security Monitoring 7 8 9 Enable DDNS Settings: On the NETWORK menu, use the DOWN arrow key to navigate to DDNS. Highlight DDNS checkbox by pressing ENTER and press the UP arrow key to put a check mark in the DDNS checkbox. Press ENTER to accept settings. 10 DigiClient Software: 11 DigiClient Software: (on your Remote Computer*) Follow the installation screens to complete DigiClient Software installation. Set the DDNS Settings: 1. Scroll down to the DDNS SERVER within the NETWORK menu and press ENTER. 2. Enter the USER ID sent to you in the REGISTRATION CONFIRMATION EMAIL. 3. Enter the DOMAIN NAME sent to you in the REGISTRATION CONFIRMATION EMAIL (i.e.tomsmith.strategicvista.net) leaving out the .strategicvista.net part of the URL. 4. Enter your PASSWORD (from the DDNS Registration Email sent to you). 5. Click the DDNS Status button - A SUCCESS message will appear if the settings are correct. 6. Scroll to OK button and press ENTER to accept. 7. On the SYSTEM menu screen scroll down to APPLY and press ENTER. 8. The system will now ask you to RESTART. Click OK. tomsmith1 tomsmith (on your Remote Computer*) Close the CD Menu Screen. A DigiClient icon and a DigiPlayer icon will appear on your desktop. DigiClient **** SUCCESS Install Software: 12 (on your Remote Computer*) Insert the DigiClient Software CD into your remote computer’s CD ROM drive and proceed with installation. DigiPlayer Run the DigiClient Software: (on your Remote Computer*) Double-click the DigiClient icon on your desktop to run the program. DigiClient On your Remote Computer* *For viewing your system from a remote location DHU500R Series Quick Start Guide_R1 Page COMPUTER - NOT INCLUDED www.digimerge.com 3 p e St ed u tin n Co Set up Internet Remote Security Monitoring 13 Set-up: (on your Remote Computer*) 16 Click the Setup icon from the DigiClient Software Screen SET-UP BUTTON 14 DigiClient Software - Local Configuration: (on your Remote Computer*) From the DigiClient Software - Local Configuration screen (as shown in Step 13), select the new Group you created using the drop down menu (1) and press the CONNECT button (2) to connect to the REMOTE* LIVE site. 1 2 Add ‘Group’: CONNECT BUTTON (on your Remote Computer*) Click on the SITE listing on the Left Panel, and Right Click to ‘ADD GROUP’. Enter a name for the GROUP, and click OK. OFFICE 15 Enter Setup Information: (on your Remote Computer*) 6 System tomsmith.strategicvista.net 6100 ADMIN **** 7 8 Camera Selection Dropdown Menu DHU500R Series Quick Start Guide_R1 1 2 3 4 5 6 Page 1. Enter a Name for the System 2. Enter the DDNS DOMAIN NAME from the Registration Email sent to you. 3. Enter the DVR TCP/IP port (6100 by default) 4. Enter the User ID (ADMIN by default), max. 5 characters 5. Enter the Admin Password (1234 by default) * User ID and Password are case sensitive 6. Add cameras using the dropdown menus to assign camera positions 7. Click ADD to add the System Location 8. Click OK REMOTE* LIVE SITE *For viewing your system from a remote location For other remote access viewing features, please consult the DigiClient Software Manual. www.digimerge.com THIS PAGE IS INTENTIONALLY LEFT BLANK. DHU500R Series Quick Start Guide_R1 Page www.digimerge.com It’s all on the Web www.digimerge.com For detailed setup information, please refer to your User’s Manual. For additional information please visit our website www.digimerge.com. Toll Free Technical Support - North America: 1-866-344-4674 Email Support: [email protected]; [email protected] Product Information Product Documentation DHU500R Series Quick Start Guide_R1 Specification Sheet User’s Manual Digi Client Software Manual Quick Start Guide Page Software/Hardware Updates & Ugrades www.digimerge.com
* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project
advertisement
© 2021