PTAC Type - LG PTAC Systems

PTAC Type - LG PTAC Systems
PTAC Type
(60Hz/R410A)
6RWU0-02A
PTAC
Introduction
Part 1 General information
1. Model line up ....................................................................................12
2. Nomenclature ...................................................................................13
3. Appearance.......................................................................................14
4. List of functions ...............................................................................15
5. Features ............................................................................................16
2
PTAC
Part 2 Product data
1 YA chassis ........................................................................................22
1.1
1.2
1.3
1.4
1.5
1.6
1.7
1.8
Features........................................................................................................22
List of functions.............................................................................................23
Specifications................................................................................................24
Dimensions ...................................................................................................36
Piping diagrams ............................................................................................37
Wiring diagrams............................................................................................40
Capacity tables .............................................................................................41
Operation range............................................................................................51
2 Control Devices...............................................................................52
2.1 Electronic Controls(Micom models) ..............................................................52
PTAC
3
Part 3 Design and installation
1 General installation procedure........................................................58
2 Installation of unit.............................................................................59
2.1
2.2
2.3
2.4
2.5
4
Safety precautions .........................................................................................59
Points of explanation about operations .........................................................62
Selecting installation site for the unit .............................................................63
Installation of unit...........................................................................................63
Wall sleeve installation ..................................................................................65
PTAC
Part 4 Accessories
1 Controller accessories ....................................................................72
1.1
1.2
1.3
1.4
Hard Wire kit .................................................................................................72
Fuse Holder kit ..............................................................................................74
Circuit Breaker kit..........................................................................................76
Power Switch ................................................................................................79
2 Mechanical accessories ..................................................................82
2.1 Control Panel Key Lock ...............................................................................82
2.2 Condensate Disposal Pump kit ....................................................................83
2.3 Architectural Grille Aluminum – Single Pack .................................................87
2.4 Condensate Drain Kit....................................................................................89
2.5 Leveling legs .................................................................................................92
2.6 Subbase ........................................................................................................93
2.7 Wiring Harness kit .........................................................................................96
2.8 Replacement Filter ........................................................................................97
2.9 Wall Sleeve ...................................................................................................97
2.10 Vent Filter ...................................................................................................98
PTAC
5
Test condition of International Standards
6RWU0-02A
Test condition of International Standards
KSC
9306
ISO
5151
ARI
210/240
AHAM
AS
1861.1
SSA
385
DB°C(°F)
27.0
27.0
26.7(80)
26.7(80)
27.0
29.0
WB°C(°F)
19.5
19.0
19.4(67)
19.4(67)
19.0
19.0
DB°C(°F)
35.0
35.0
35.0(95)
35.0(95)
35.0
46.0
WB°C(°F)
24.0
24.0
23.9(75)
23.9(75)
24.0
24.0
DB°C(°F)
20.0
20.0
21.1(70)
21.1(70)
21.0
21.0
WB°C(°F)
15.0
15.0
15.6(60)
15.6(60)
15.0
15.5
DB°C(°F)
7.0
7.0
8.3(47)
8.3(47)
7.0
7.0
WB°C(°F)
6.0
6.0
6.1(43)
6.1(43)
6.0
6.0
DB°C(°F)
32.0
32.0
26.7(80)
32.2(90)
32.0
29.0
WB°C(°F)
23.0
23.0
19.4(67)
22.8(73)
23.0
19.0
DB°C(°F)
43.0
43.0
46.1(115)
43.3(110)
43.0
54.0
WB°C(°F)
26.0
26.0
23.9(75)
25.6(78)
26.0
24.0
DB°C(°F)
27.0
27.0
26.7(80)
26.7(80)
-
-
WB°C(°F)
19.0
19.0
19.4(67)
22.8(73)
-
-
DB°C(°F)
21.0
24.0
23.9(75)
23.9(75)
-
-
WB°C(°F)
15.0
18.0
18.3(65)
18.3(65)
-
-
DB°C(°F)
27.0
27.0
26.7(80)
26.7(80)
27.0
27.0
WB°C(°F)
24.0
24.0
23.9(75)
23.9(75)
24.0
24.0
DB°C(°F)
27.0
27.0
26.7(80)
26.7(80)
27.0
27.0
WB°C(°F)
24.0
24.0
23.9(75)
23.9(75)
24.0
24.0
DB°C(°F)
21.0
21.0
19.4(67)
21.1(70)
21.0
21.0
WB°C(°F)
15.0
15.0
13.9(57)
15.6(60)
16.0
16.0
DB°C(°F)
21.0
21.0
19.4(67)
21.1(70)
21.0
21.0
WB°C(°F)
15.0
15.0
13.9(57)
15.6(60)
16.0
16.0
CLASSIFICATION
Indoor
Cooling
Capacity
Outdoor
Indoor
Heating
Capacity
Maximum
Outdoor
Indoor
Cooling
Operating
Outdoor
Maximum
Indoor
Heating
Operating
Enclosure
Outdoor
Indoor
Sweat /
Condensate
Outdoor
Disposal
Freeze-up/
Indoor
Low
Temperature Outdoor
KS : Korea Standard
ISO : International Standard Organization
ARI : Airconditioning and Refrigeration Institute
AHAM : Association of Home Appliance Manufacturers
AS : Australia Standard
SSA : Saudi Arabian Standard
In the table above, temperatures are expressed in Fahrenheit(°F) within parentheses only for ARI and AHAM standards.
6
PTAC
General information
Introduction
6RWU0-02A
Introduction
Preface
Packaged Terminal Air-Conditioners(PTAC) of LG is the best choice a customer can avail when it comes to a quiet environment. Ultra quiet operation is the hallmark of these Air-Conditioners of LG. These range of units are suitable for Hotels and
Healthcare applications. These units have extremely low noise levels and outstanding sound prevention ratings. Moreover,
these units have higher Energy ratings which results in excellent energy savings.
These units are also provided with unique features to provide better usability and easy installation for the user.
The capacity of these PTAC models ranges from 7,000 Btu/h to 15,000 Btu/h.
Some of the important features of this units are as follows:Long term money saving: By providing features such as Gold Fin etc... to maintain the same performance throughout the life
of the Air-Conditioner.
Comfort : With features such as Wall Thermostat temperature control, Auto Restart, etc…, which gives ultimate comfort to
our customer.
These units are equipped with many standard and optional features for our customers and for details please refer to the
detailed specification followed after this description.
LG Electronics Inc.
Air Conditioning Company
General information
PTAC
7
Introduction
6RWU0-02A
Publication History
Pub. No.
Frequency Category
Product name
Refrigerant
Notes
Published in
6RWU0 - 01A
60Hz
RAC
PTAC
R410A
New Edition of PDB
Apr.2010
6RWU0 - 01B
60Hz
RAC
PTAC
R410A
Spec sheet update
June.2010
6RWU0 – 01C
60Hz
RAC
PTAC
R410A
Spec sheet update
August. 2010
6RWU0 – 01D
60Hz
RAC
PTAC
R410A
Add Operation range
Dec. 2010
6RWU0 – 02A
60Hz
RAC
PTAC
R410A
2011 New line-up update
Apr. 2011
8
PTAC
General information
6RWU0-02A
Introduction
Step by step air conditioner selection process (reference)
(1)
Calculate or obtain the maximum heat load for the area to be air conditioned.
Specifications
(2)
Model features and functions
Air-flow and temperature distribution
Selection of the control system
Remote Wall Thermostat Control
(3)
Front Desk Control
CAUTION
1. Air conditioners should not be installed in areas where corrosive gases such as acid gas or
alkaline gas is present.
Note :
Here in this PDB, the temperature units are generally expressed in Fahrenheit (°F) but for specific regions
please conform to local standards whenever necessary.
General information
PTAC
9
6RWU0-02A
10
PTAC
General information
Part 1 General information
1. Model line up .......................................................................................12
2. Nomenclature ......................................................................................13
3. Appearance ..........................................................................................14
4. List of functions ..................................................................................15
5. Features ...............................................................................................16
General information
PTAC
11
Model line up
6RWU0-02A
1. Model line up
Model names
Capacity, kW(kBtu/h)
Chassis
2.05(7)
YA
12
AYC073ALE20(LP073CD2A)
AYH073ALE20(LP073HD2A)
AYC07EALE20(LP076CD2A)
AYH07EALE20(LP076HD2A)
AYC073ALE30(LP073CD3A)
AYH073ALE30(LP073HD3A)
AYC07EALE30(LP076CD3A)
AYH07EALE30(LP076HD3A)
2.64(9)
AYC093ALE30(LP093CD3A)
AYH093ALE30(LP093HD3A)
AYC09EALE30(LP096CD3A)
AYH09EALE30(LP096HD3A)
PTAC
3.52(12)
AYC123ALE30(LP123CD3A)
AYH123ALE30(LP123HD3A)
AYC12EALE30(LP126CD3A)
AYH12EALE30(LP126HD3A)
4.4(15)
AYC153ALE30(LP153CD3A)
AYH153ALE30(LP153HD3A)
AYC15EALE30(LP156CD3A)
AYH15EALE30(LP156HD3A)
AYC153ALE50(LP153CD5A)
AYH153ALE50(LP153HD5A)
AYC15EALE50(LP156CD5A)
AYH15EALE50(LP156HD5A)
General information
6RWU0-02A
Nomenclature
2. Nomenclature
Global standard
[New version]
A Y
C
0
7
3
A
L
E
2
0
Model Development serial number.
Heater Capacity:
0kW: No Heater 2kW: 2.0 ~ 2.9
1kW: 1.0 ~ 1.9
3kW: 3.0 ~ 3.9
Function.
A: Cooling Standard
B: Cooling + Corrosion Protection
C: Cooling + Condensate Pump
E: Electronic
Look.
T: Trane
4kW : 4.0 ~ 4.9
5kW : 5.0 ~ 5.9
H: Heat Pump Standard
J: Heat Pump + Corrosion Protection
K: Heat Pump + Condensate Pump
L: LG
Chassis : A – YA chassis.
Power Rating:
1: 115V, 60Hz
2: 220V, 60Hz
3: 208-230V, 60Hz
5: 200-220V, 50Hz
6: 220-240V, 50Hz
7: 110V, 50-60Hz
8: 380-415V, 50Hz
9: 380-415V, 60Hz
E: 265V, 60Hz
Cooling/Heating Capacity.
Ex) 07 -> 7,000 Btu/h Class
Model Type:
C: Cooling + Electric Heater or Cooling only.
H: Heat pump + Electric Heater or Heat Pump only.
W: Window Air Conditioner
Y: Packaged Terminal Air Conditioner
X: Through the Wall Air Conditioner
E: Casement Air Conditioner
U: SPVU Air Conditioner
L: Condole Air Conditioner
Q: Low Profile Air Conditioner
Production Center, Refrigerant
L: Changwon R22
N: India
A: Changwon R410A
Z: Brazil
C: Changwon R407C
D: Indonesia
T: China
M: Mexico
K: Turkey R22
V: Vietnam
E: Turkey R410A
S: Outsourcing
H: Thailand
General information
PTAC
13
Appearance
6RWU0-02A
3. Appearance
Chassis
YA
14
Unit
Models
AYC073ALE20(LP073CD2A)
AYH073ALE20(LP073HD2A)
AYC073ALE30(LP073CD3A)
AYH073ALE30(LP073HD3A)
AYC07EALE20(LP076CD2A)
AYH07EALE20(LP076HD2A)
AYC07EALE30(LP076CD3A)
AYH07EALE30(LP076HD3A)
AYC093ALE30(LP093CD3A)
AYH093ALE30(LP093HD3A)
AYC09EALE30(LP096CD3A)
AYH09EALE30(LP096HD3A)
PTAC
AYC123ALE30(LP123CD3A)
AYH123ALE30(LP123HD3A)
AYC12EALE30(LP126CD3A)
AYH12EALE30(LP126HD3A)
AYC153ALE30(LP153CD3A)
AYH153ALE30(LP153HD3A)
AYC153ALE50(LP153CD5A)
AYH153ALE50(LP153HD5A)
AYC15EALE30(LP156CD3A)
AYH15EALE30(LP156HD3A)
AYC15EALE50(LP156CD5A)
AYH15EALE50(LP156HD5A)
General information
6RWU0-02A
List of functions
4. List of functions
Category
Function
PTAC Type
Cooling only Models
PTAC Type
Heat Pump Models
Top discharge
Yes
2/2/2
2 way
O
O
O
O
O
O
O
O
O
O
O
Top discharge
Yes
2/2/2
2 way
O
O
O
O
O
O
O
O
O
O
O
Air discharge type
Airflow direction control (up & down)
Airflow direction control (left & right)
Air flow
Auto swing
Airflow steps (fan/cool/heat)
Airflow Direction
Deodorizing filter
Air purifying Plasma air filter
Air filter (washable / anti-fungus)
Installation Electric heater (operation)
Reliability Hot start
Auto restart operation
Micom control
Convenience Air ventilation
Forced operation
Sleep mode
Timer
Wired remote controller
Individual
Wireless remote controller
control
Wireless LCD remote control
Energy save mode
Others
Thermostat
Thermistor
O : applied
- : not applied
* the front view of the air conditioner may vary depending upon the type of front grille look.
General information
PTAC
15
Features
6RWU0-02A
5. Features
The following features can be found in PTAC (Packaged Terminal Air-Conditioners) :n 2 -Way Air Flow Direction
n Two Fan Motors
n Washable Filters
n LED Diagnostics and Self Diagnostics
n Low Noise at High Air Volume
n 2 Position Discharge Grille
n High Efficiency Compressor
n Indoor Room Freeze Protection
n Energy Saver Mode
n Door Switch/Occupancy Sensor
n Timer
n Compressor Overload Protection
n Electric Heater
n Outdoor Air Temperature Switchover
n Deice Control
n Temperature Limits
n Air Ventilation
n Condensate Drain Valve
n Energy saving Anti-corrosion treated Fins
n Quick Heater Recovery
n Infinite Impulse Response(IIR)
n Reverse Cycle Defrosting (PTHPʼs only)
n Compressor Restart Delay
n High Temperature Heat Pump operation Protection
n Fan only Setting
n Remote Thermostat Control
n Indoor Fan Speed Setting
n Zone Sensor
2 -Way Air Flow Direction
40
15
Air Flow can be adjusted by changing the direction of the air conditionerʼs louvers to attain the desired level of comfort and
convenience. This can also increase the cooling efficiency of the air conditioner.
In order to attain maximum cooling efficiency, adjust the louvers so that they face upwards.
16
PTAC
General information
6RWU0-02A
Features
Washable Filters
The Unit uses two filters on the indoor side which can be slid easily. These filters can be taken out without removing the
Front Grille and then cleaned by washing or brushing.
The filters should be checked and cleaned every two(2) weeks or as necessary to maintain the optimal performance of the
air conditioner. depending upon the region and purpose of application.
Low Noise at High Air Volume
New Blowers and Fans which are bigger and stronger than earlier ones operate at low rpmʼs and have higher efficiency.
High Efficiency Compressor
LG Rotary compressors have low noise, Low Vibration and higher efficiency and
reliability.
Energy save mode
This feature employs a programmable logic which enables the unit to minimize power consumption. When the switch is activated in the “on” position, the Indoor fan turns off as soon as the compressor stops running. And in the “off” mode, the
indoor fan runs continuously even if the compressor stops running.
Timer
By this feature we can set the operating time of the air conditioner from one(1) hour up to a time of 12 hours. In the “Off”
mode, the Air Conditioner stops operating after the set time, while in the “On” mode, the Air Conditioner timer can be set so
that the unit starts operating at the desired time.
General information
PTAC
17
6RWU0-02A
Features
Electric Heater
Electric heaters are used in cold regions when instant heating is
required in the room.
In such cases, electric heaters are preferred over heat pump models
which sometime require long time to achieve the desired heating
effect.
Fig : Coil Heater
Electric Heater are of two types – Coil Heater and PTC Heater
Fig : PTC Heater
Deice Control
When the unit starts operating in the heating mode, then, to protect the outdoor unit pipe from freezing, “deice” control is
used. By exercising this control, the cycle is reversed into the cooling mode; to deice or defrost the condenser tubes in the
outdoor unit.
Air Ventilation
Air ventilation is carried out by means of a ventilation lever
from time to time to induct fresh air into the room. For the air
conditioner to maintain the best cooling conditions, the lever
must be in the closed position. And when the ventilation lever
is set in the open position, the damper opens and the room
air is exhausted while at the same time fresh air from outside
enters the room.
VENT
CLOSE
VENT
OPEN
Energy saving Gold Fin
Heat exchangers are coated with anti-corrosive and Hydrophilic layers. It prevents the corrosion of heat exchanger.
Fins remain new for a long time and the efficiency of the heat exchanger remains constant thereby saving power and
maintenance cost.
Salt Spray Test Result : After 360 hours
[ Test Standard: ASTM B-117, KS D 9502 ]
Uncoated
Aluminum
Anti Corrosion Gold Fin
Hydrophilic
layer
Anticorrosion
layer
Pitting Corrosion
Aluminum
[ Aluminum]
10 mm
10 mm
Anti Corrosion Gold Fin
• Pitting corrosion
on the surface
No corrosion
Gold Fin Anti-Corrosive Treatment:
18
PTAC
General information
6RWU0-02A
Features
Infinite Impulse response (IIR)
The IIR function senses the temperature several times per second and make micro adjustments accordingly.
Compressor Restart Delay
This feature extends the overall life of the compressor by preventing the short cycling of the air-conditioner. When the compressor restarts, LG PTAC is designed to give it a minimum of three minutes to have a time of equalizing the refrigerant
pressures for optimizing the cycle.
Fan only setting
When the Fan only setting is made, only the fan on the indoor side operates while the compressor stops operating and the
unit ceases to run in the Cooling or the Heating mode.
Indoor Fan speed setting
The Indoor fan can run at HIGH or LOW speed for either COOLING or HEATING operation.
Two Fan motors
The air conditioning unit has two fan motors for providing a quiet operation and maximum efficiency.
LED Diagnostics and Self Diagnostics
LED Diagnostics feature indicates the problem by its easy to read diagnostics, when the unit does not operate properly. For
example, one blink every 2 seconds indicate compressor failure.
While Self Diagnostics feature is used in micom models and it indicates the problem by a displaying a set of error codes.
2 position discharge grille
The discharge grille can provide air flow upwards at an angle of 40˚ off vertical or 15˚ off vertical. The angle is changed by
removing the front grille and 4 screws that fasten the discharge grille to the front grille and rotating the louvers to an alternate position.
Indoor room freeze protection
When the unit senses the room temperature to be less than 40˚ F, the unit activates the fan motor and either the electric
resistance heater or the hydronic heater, to prevent the pipes or fixtures from freezing. This also overrides the front desk
control of the unit mounted controls or the wall mounted controls.
Door Switch/Occupancy Sensor
The unit is capable of accommodating a field installed door switch and occupancy sensor to operate the energy management feature by checking whether any people are present inside the room or not. If there are no people inside the room, the
energy management feature is in play.
Compressor Overload protection
This feature prevents damage of the compressor by sensing the indoor coil temperature during the heating mode. If the
indoor coil temperature is over 130˚ F, the outdoor fan is switched off and it operates again only when the temperature
drops below 120 ˚ F.
General information
PTAC
19
Features
6RWU0-02A
Outdoor Air Temperature switchover
This feature changes the operating mode of the unit from the heat pump mode to total resistance heat.
Temperature limits
The unit is programmed to provide both heating and cooling temperature limits by dip switches on the control panel. The
limits are from 50˚ F to 90˚ F. These temperature limits help to prevent overheating and overcooling thereby reducing the
energy costs.
Condensate Drain Valve
The unit has a condensate drain valve to prevent water from collecting and freezing in the basepan.
Quick Heater Recovery
The unit is designed to operate the electric heater so as to warm the room to the desired temperature set point as soon as
the Heat Pump cycle operates. This feature has an advantage of reducing the time to reach the desired temperature for better comfort.
Reverse Cycle Defrosting – (PTHPʼs only)
This feature enables the unit to activate the reverse cycle defrost so as to prevent the formation of ice on the outdoor unit,
which is exposed to cold environment. Formation of ice reduces the airflow through the coil and hence the efficiency of the
air conditioning unit. The LG PTHP employs an active reverse cycle defrost function to melt the ice off the outdoor coil for
ensuring room comfort conditions and savings from extended operation.
High Temperature Heat Pump Operation Protection
When the unit operates at high outdoor temperature conditions during the cooling cycle, this feature switches off the compressor to prevent damage.
Remote Thermostat Control
The PTAC air conditioning unit is designed and built to be operated from any
four(4) or five(5) wire remote mounted thermostat if desired. The unit has a builtin low voltage power source which can accommodate any of the thermostat
choices – manual, auto changeover or programmable. A remote thermostat can
also be added to any unit.
Zone Sensor
The PTAC air conditioning unit can be controlled by means of a Zone Sensor which carries out the same functions as that of
a Wall Thermostat. In other words, it is a remote wall thermostat.
20
PTAC
General information
Part 2 Product data
1 YA chassis............................................................................................22
1.1 Features............................................................................................................22
1.2 List of functions.................................................................................................23
1.3 Specifications....................................................................................................24
1.4 Dimensions .......................................................................................................36
1.5 Piping diagrams ................................................................................................37
1.6 Wiring diagrams................................................................................................40
1.7 Capacity tables ..................................................................................................41
1.8 Operation range.................................................................................................51
2 Control Devices ..................................................................................52
2.1 Electronic Controls............................................................................................52
Product Data
PTAC
21
YA Chassis
6RWU0-02A
1. YA Chassis
Models : AYC073ALE20(LP073CD2A)
AYH073ALE20(LP073HD2A)
AYC07EALE20(LP076CD2A)
AYH07EALE20(LP076HD2A)
AYC073ALE30(LP073CD3A)
AYH073ALE30(LP073HD3A)
AYC07EALE30(LP076CD3A)
AYH07EALE30(LP076HD3A)
AYC093ALE30(LP093CD3A)
AYH093ALE30(LP093HD3A)
AYC09EALE30(LP096CD3A)
AYH09EALE30(LP096HD3A)
AYC123ALE30(LP123CD3A)
AYH123ALE30(LP123HD3A)
AYC12EALE30(LP126CD3A)
AYH12EALE30(LP126HD3A)
AYC153ALE30(LP153CD3A)
AYH153ALE30(LP153HD3A)
AYC15EALE30(LP156CD3A)
AYH15EALE30(LP156HD3A)
AYC153ALE50(LP153CD5A)
AYH153ALE50(LP153HD5A)
AYC15EALE50(LP156CD5A)
AYH15EALE50(LP156HD5A)
1.1 Features
n 2 -Way Air Flow Direction
n Washable Filters
n Low Noise at High Air Volume
n High Efficiency Compressor
n Energy Saver Mode
n Timer
n Electric Heater
n Deice Control
n Air Ventilation
n Energy saving Anti-corrosion treated Fins
n Infinite Impulse Response(IIR)
n Compressor Restart Delay
n Fan only Setting
n Indoor Fan Speed Setting
22
n Two Fan Motors
n LED Diagnostics and Self Diagnostics
n 2 Position Discharge Grille
n Indoor Room Freeze Protection
n Door Switch/Occupancy Sensor
n Compressor Overload Protection
n Outdoor Air Temperature Switchover
n Temperature Limits
n Condensate Drain Valve
n Quick Heater Recovery
n Reverse Cycle Defrosting (PTHPʼs only)
n High Temperature Heat Pump operation Protection
n Remote Thermostat Control
n Zone Sensor
PTAC
Product Data
6RWU0-02A
YA Chassis
1.2 List of functions
Category
Air flow
Air purifying
Installation
Reliability
Convenience
Individual control
Others
Function
Air discharge type
Airflow direction control (up & down)
Airflow direction control (left & right)
Auto swing
Airflow steps (fan/cool/heat)
Airflow Direction
Deodorizing filter
Plasma air filter
Air filter (washable / anti-fungus)
Electric heater (operation)
Hot start
Auto restart operation
Micom control
Air ventilation
Forced operation
Sleep mode
Timer
Wired remote controller
Wireless remote controller
Wireless LCD remote control
Energy saver switch
Thermostat
Thermistor
PTAC
Cooling only Models
Top discharge
Yes
2/2/2
2 way
O
O
O
O
O
O
O
O
O
O
O
PTAC
Heat Pump Models
Top discharge
Yes
2/2/2
2 way
O
O
O
O
O
O
O
O
O
O
O
Note :
O : applied
- : not applied
Product Data
PTAC
23
YA Chassis
6RWU0-02A
1.3 Specifications
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC073ALE20(LP073CD2A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.17
7,200
2.4
8,200
620
3.0
11.5
3.4
11.6
1 / 208 / 60
97
2.23
7,400
2.5
8,600
635
2.9
10.9
3.4
11.6
1 / 230 / 60
97
14.6
15.0
8.5(300)
17(600)
1.6
45/-/43
61
R410A, 660(23.3)
Rotary(Non Tropical)
GA066KAB
PSC
POE(RB68A)orPVE(FVC68D)
230
B120-160-241E
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
9.1/60
2R *12C *18FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
42.2(93.0)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC07EALE20(LP076CD2A)
2.11
7,200
2.0
6,800
650
2.7
7.6
3.2
11.0
1 / 265 / 60
92
9.7
15.0
7.2(255)
17(600)
1.5
45/-/43
61
R410A, 650(22.9)
Rotary
GA066QAB
PSC
POE(RB68A)orPVE(FVC68D)
230
B105-165-241E
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
24.9/60
2R *12C *21FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
42.2(93.0)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
24
PTAC
Product Data
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC073ALE30(LP073CD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.17
7,200
3.1
10,500
620
3.0
14.9
3.39
11.6
1 / 208 / 60
99.4
2.23
7,400
3.5
11,900
635
2.9
15.2
3.39
11.6
1 / 230 / 60
95.2
19.2
20.0
8.5(300)
17(600)
2.0
45/-/43
61
R410A, 660(23.3)
Rotary(Non Tropical)
GA066KAB
PSC
POE(RB68A)orPVE(FVC68D)
230
B120-160-241E
Cross Flow Fan
Axial Fan
6 Poles / 4 Poles
9.1/60
2R *12C *18FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
42.2(93)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC07EALE30( LP076CD3A)
2.11
7,200
3.7
11,900
650
2.7
7.6
1.9
11.0
1 / 265 / 60
90.8
17.7
20.0
7.2(255)
17(600)
2.0
45/-/43
61
R410A, 650(22.9)
Rotary
GA066QAB
PSC
POE(RB68A)orPVE(FVC68D)
230
B105-165-241E
Cross Flow Fan
Axial Fan
6 Poles / 4 Poles
24.9/60
2R *12C *21FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
42.2(93)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
25
YA Chassis
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH073ALE20(LP073HD2A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.11
7200
1.82
6200
2.4
8200
621/567
3.0/2.7
10.9
3.4
11.6
3.2
1 / 208 / 60
99.5/99.5
2.17
7400
1.88
6400
2.5
8600
638/586
2.9/2.6
11.5
3.4
11.6
3.2
1 / 230 / 60
95.7/98.0
14.6
15
8.5(300)
17(600)
1.6
45/-/43
61
R410A, 660(23.3)
Rotary(Non Tropical)
GA066KAB
PSC
POE or PVE
230
B120-160-241E
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
9.1/60
2R *12C *18FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
43.5(95.7)
YA
Thermistor
O
O
2002.2.2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH07EALE20(LP076HD2A)
2.14
7300
1.79
6100
2
6800
655/575
2.7/2.5
7.6
3.3
11.2
3.1
1 / 265 / 60
91.6/88.7
9.7
15
7.8(275)
20(706)
1.5
45/-/43
61
R410A, 665(23.4)
Rotary(Non Tropical)
GA066QAB
PSC
POE or PVE
230
B105-165-241E
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
2009.7.25
2R *12C *21FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
44.4(97.9)
YA
Thermistor
O
O
2002.2.2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
26
PTAC
Product Data
6RWU0-02A
YA Chassis
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH073ALE30 (LP073HD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.11
7,200
1.82
6,200
3.1
10,500
620/565
3.0/2.7
10.9
3.40
11.6
3.2
1 / 208 / 60
99.4
2.17
7,400
1.88
6,400
3.5
11,900
635/585
2.9/2.6
11.5
3.40
11.6
3.2
1 / 230 / 60
95.2
19.2
20.0
8.5(300)
17(600)
2.0
45/-/43
61
R410A, 660(23.3)
Rotary(Non Tropical)
GA066KAB
PSC
POE or PVE
230
B120-160-241E
Cross Flow Fan
Axial Fan
6 Poles / 4 Poles
9.1/60
2R *12C *18FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
43.4(95.7)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH07EALE30(LP076HD3A)
2.14
7,300
1.79
6,100
3.7
11,900
655/575
2.7/2.5
7.6
3.3
11.2
3.1
1 / 265 / 60
91.5
17.6
20.0
7.8(275)
20(706)
2.0
45/-/43
61
R410A, 665(23.4)
Rotary(Non Tropical)
GA066QAB
PSC
POE or PVE
230
B105-165-241E
Cross Flow Fan
Axial Fan
6 Poles / 4 Poles
9.7/25
2R *12C *21FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
44.4(97.9)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
27
YA Chassis
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC093ALE30(LP093CD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.58
8800
3.1
10500
800/4.2/14.9
3.2
11
1 / 208 / 60
100
2.64
9000
3.5
11900
820/3.8/15.2
3.2
11
1 / 230 / 60
101
19.2
20
7.2(255)
17(600)
2.3
46/-/44
61
R410A,650(22.9)
Rotary(Non Tropical)
GKS086KAB
PSC
POE(RB68A)orPVE(FVC68D)
330
MRA 12130 - 12026
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
9.1/60
3R *12C *20FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
46.1(101.6)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC09EALE30(LP096CD3A)
2.64
9000
3.5
11900
860/3.4/14
3.1
10.5
1 / 265 / 60
95
17.7
20
8.2(290)
17(600)
2.0
46/-/44
61
R410A, 675(23.8)
Rotary(Non Tropical)
GKS086QAB
PSC
POE(RB68A)orPVE(FVC68D)
330
MRA12060-12026
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
11/52
2R *10C *19FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
47.1(103.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
28
PTAC
Product Data
6RWU0-02A
YA Chassis
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH093ALE30(LP093HD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
2.58
8800
2.32
7900
3.1
10500
800/723
4.2/4.0
14.9
3.2
11
3.2
1 / 208 / 60
99
2.64
9000
2.37
8100
3.5
11900
820/741
3.8/3.6
15.2
3.2
11
3.2
1 / 230 / 60
99.5
19.2
20
7.2(255)
17(600)
2.3
46/-/44
61
R410A, 735(25.9)
Rotary(Non Tropical)
GKS086KAB
PSC
POE(RB68A)orPVE(FVC68D)
330
MRA 12130 - 12026
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
9.1/60
3R *12C *20FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
47.7(105.2)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH09EALE30(LP096HD3A)
2.67
9200
2.4
8200
3.5
11900
865/750
3.4/3.0
14
3.2
10.8
3.2
1 / 265 / 60
95.2(93.2)
17.7
20
8.8(310)
17(600)
2.2
46/-/44
61
R410A, 800(28.2)
Rotary(Non Tropical)
GKS086QAB
PSC
POE(RB68A) or PVE(FVC68D)
330
MRA12060-12026
Cross Flow Fan
Axial Fan
6 Poles
4 Poles
11/52
2R *10C * 19FPI
3R *17C * 20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
48.7(107.4)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
29
YA Chassis
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC123ALE30(LP123CD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
3.4
11600
3.1
10500
1094
5.4
14.9
3.1
10.6
1 / 208 / 60
98
3.46
11800
3.5
11900
1113
4.9
15.2
3.1
10.6
1 / 230 / 60
99
19.3
20
7.2(255)
17(600)
2.8
50/-/48
63
R410A, 650(22.9)
Rotary(Non Tropical)
GKS113KAB
PSC
POE(RB68A)orPVE(FVC68D)
330
MRA98996-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
3R *12C *20FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
46.1(101.6)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC12EALE30(LP126CD3A)
3.45
11800
3.5
11900
1156
4.5
14
3.0
10.2
1 / 265 / 60
98
17.7
20
11.3(399)
20(706)
2.6
50/-/48
63
R410A, 715(25.2)
Rotary(Non Tropical)
GKS113QAB
PSC
POE(RB68A)orPVE(FVC68D)
330
MRA12017-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *19FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
47.1(103.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
30
PTAC
Product Data
6RWU0-02A
YA Chassis
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH123ALE30(LP123HD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
3.4
11600
3.11
10600
3.1
10500
1,095/970
5.4/4.8
14.9
3.1
10.6
3.2
1 / 208/ 60
97
3.46
11800
3.17
10800
3.5
11900
1,115/990
4.9/4.4
15.2
3.1
10.6
3.2
1 / 230/ 60
96.8
19.3
20
11(388)
20(706)
2.9
50/-/48
63
R410A, 860(30.3)
Rotary(Non Tropical)
GKS113KAB
PSC
POE(RB68A) or PVE(FVC68D)
330
MRA98996-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
3R * 12C * 20FPI
3R * 17C * 20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
47.7(105.2)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH12EALE30(LP126HD3A)
3.46
11800
3.14
10700
3.5
11900
1,135/980
4.5/3.9
14
3.0
10.4
3.2
1 / 265 / 60
95.2(94.8)
17.7
20
11(388)
20(706)
2.4
50/-/48
63
R410A, 865(30.5)
Rotary(Non Tropical)
GKS113QAB
PSC
POE(RB68A) or PVE(FVC68D)
330
MRA12027-12026
Cross Flow Fan
Axial Fan
4 Poles
21.6/52
3R *12C * 20FPI
3R *17C * 20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
48.7(107.4)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
31
YA Chassis
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC153ALE30(LP153CD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
4.13
14100
3.1
10500
1532
7.6
14.9
2.7
9.2
1 / 208 / 60
95
4.19
14300
3.5
11900
1554
6.9
15.2
2.7
9.2
1 / 230 / 60
95
19.3
20
11(388)
20(706)
3.9
50/-/48
63
R410A, 745(26.2)
Rotary(Non Tropical)
GKS141KAC
PSC
POE(RB68A) or PVE(FVC68D)
350
MRA12136-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *19FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
48(105.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC15EALE30(LP156CD3A)
4.1
14000
3.5
11900
1555
5.9
14
2.6
9
1 / 265 / 60
98
17.7
20
11.3(399)
20(706)
3.8
50/-/48
63
R410A, 720(25.4)
Rotary(Non Tropical)
GKS141QAB
PSC
POE(RB68A) or PVE(FVC68D)
330
MRA98996-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *18FPI
2R *17C *18FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
49.1(108.2)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54°F ~ 86°F(12.2°C ~ 30°C)
54°F ~ 86°F(12.2°C ~ 30°C)
Micom
12h, on/off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
32
PTAC
Product Data
6RWU0-02A
YA Chassis
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYC153ALE50(LP153CD5A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
4.13
14,100
4.6
15,695
1,530
7.6
20.5
2.70
9.2
1 / 208 / 60
96.8
4.19
14,300
5.0
17,060
1,550
6.9
21.1
2.70
9.2
1 / 230 / 60
97.7
26.3
30.0
11(388)
20(706)
4.4
50/-/48
63
R410A, 745(26.2)
Rotary(Non Tropical)
GKS141KAC
PSC
POE(RB68A) or PVE(FVC68D)
350
MRA12136-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *19FPI
2R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
48(105.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
L - Look
Slide In-Out
Electric Heater
AYC15EALE50(LP156CD5A)
4.10
14,000
5.0
17,060
1,555
5.9
14.0
2.63
9.0
1 / 265 / 60
99.5
26.3
30.0
11.3(399)
20(706)
4.4
50/-/48
63
R410A, 720(25.4)
Rotary(Non Tropical)
GKS141QAB
PSC
POE(RB68A) or PVE(FVC68D)
330
MRA98996-12026
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *18FPI
2R *17C *18FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
49.1(108.2)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
33
YA Chassis
6RWU0-02A
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH153ALE30(LP153HD3A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
4.25
14,500
3.49
11,900
3.1
10,500
1540/1340
7.6/6.6
14.9
2.8
9.4
2.6
1 / 208 / 60
98.8
4.31
14,700
3.55
12,100
3.5
11,900
1560/1360
6.9/6.0
15.2
2.8
9.4
2.6
1 / 230 / 60
98.7
19.3
20.0
11(388)
20(706)
4.1
50/-/48
63
R410A, 960(33.9)
Rotary(Non Tropical)
GJS151KAB
PSC
POE(RB68A) or PVE(FVC68D
440
INTERNAL
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *19FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
51.6(113.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH15EALE30(LP156HD3A)
4.31
14,700
3.55
12,100
3.5
11,900
1,560/1,360
6.0/5.4
14
2.8
9.4
2.6
1 / 265 / 60
97.7
17.7
20.0
11(388)
20(706)
4.1
50/-/48
63
R410A, 1,000(35.3)
Rotary
GJS151QAA
PSC
POE(RB68A) or PVE(FVC68D)
440
MRA12081-12026
Cross Flow Fan
Axial Fan
4 Poles
21.6/52
2R *10C *19FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
52.6(116)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, on/off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
34
PTAC
Product Data
6RWU0-02A
YA Chassis
Model
Cooling Capacity
Heating Capacity (for Heat Pump models)
Electric Heater capacity
Power Input
Cooling/ Heating
Running Current
Cooling/ Heating
Starting Current
Cooling/ Heating
Electric Heater Current
EER
COP
Power Supply
Power Factor
MCA
MOP
Air Flow Rate
Indoor,Max
Outdoor,Max
Dehumidification
Sound Level
Indoor, H/M/L
(SoundPressure,1m) Outdoor, Max
Refrigerant & Charge
Compressor
Type
Model
Motor Type
Oil Type
Oil Charge
O.L.P Name
Fan
Type(In/Out)
Motor Type(In/Out)
Motor Output(In/Out)
Heat Exchanger
Evaporator
Condensor
Power Supply Cable (Power Cord)
Dimension ( W x H x D)
Net Weight
Tool Code
Features
AYH153ALE50(LP153HD5A)
kW
Btu/h.
kW
Btu/h.
kW
Btu/h.
W
A
A
A
W/W
Btu/h.W
W/W
Ø / V / Hz
%
A
A
m3/min(CFM)
m3/min(CFM)
pts/h
dB(A)±3
dB(A)±3
g(oz)
cc
W
Rows * Column * FPI
Rows * Column * FPI
No. x mm2
mm
inch
kg(lbs)
Temperature Control
Energy Saver Mode
Prefilter(washable/anti-fungus)
Plasma Filter
Steps, Fan/Cool/Heat
Airflow Direction Control(up&down)
Airflow Direction Control(left&right)
Remote Controller Type
Setting Temperature
Cooling
Range
Heating
Auto Operation (Micom Control)
Panel Touch Type
Timer
Air Discharge
Air-Ventilation
Deice Control(Defrost)
Hot Start
Look
Cabinet Type(Chassis Type)
Special Function
4.25
14,500
3.49
11,900
4.6
15,695
1540/1340
7.6/6.6
14.9
2.75
9.4
2.6
1 / 208 / 60
97.4
4.31
14,700
3.55
12,100
5.0
17,060
1560/1360
6.9/6.0
15.2
2.75
9.4
2.6
1 / 230 / 60
98.3
26.3
30.0
11(388)
20(706)
4.6
50/-/48
65
R410A, 960(33.9)
Rotary(Non Tropical)
GJS151KAB
PSC
POE(RB68A) or PVE(FVC68D
440
INTERNAL
Cross Flow Fan
Axial Fan
4 Poles
24.9/60
2R *10C *19FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
51.6(113.8)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
AYH15EALE50(LP156HD5A)
4.31
14,700
3.55
12,100
5.0
17,060
1,560/1,360
6.0/5.4
7.2
2.75
9.4
2.6
1 / 265 / 60
92.0
26.3
30.0
11(388)
20(706)
4.6
50/-/48
63
R410A, 1,000(35.3)
Rotary
GJS151QAA
PSC
POE(RB68A) or PVE(FVC68D)
440
MRA12081-12026
Cross Flow Fan
Axial Fan
4 Poles
21.6/52
2R *10C *19FPI
3R *17C *20FPI
3 * 2.1
1,066*406*505
42*16*19-7/8
52.6(116)
YA
Thermistor
O
O
2/2/2
Manual
Wall Thermostat
54℉ ~ 86℉(12.2℃ ~ 30℃)
54℉ ~ 86℉(12.2℃ ~ 30℃)
Micom
12h, On/Off
Rear
O
O
L - Look
Slide In-Out
Electric Heater
Note : ○ : applied
- : not applied
Product Data
PTAC
35
36
1
2
1,066mm (42")
TOP VIEW
PTAC
Architectural Grille
3
5
Remark
CHASSIS CODE : YA
an air guide should be installed on the outdoor side.
2. In an area or space having no proper circulation,
1. The unit should not be installed in a closed area.
■ Note
76, Seongsang-dong, Changwon City, Gyeongnam,
641-713, Korea
TEL : 82 – 55 – 269 - 3506
www.lge.com/airconditioner
3
505mm (20")
Vertical Air Deflector
2
4
Inlet Grille
Part name
1
Item No.
406mm (16")
PTAC
YA Chassis
6RWU0-02A
1.4 Dimensions
Product Data
406mm (16")
6RWU0-02A
YA Chassis
1.5 Piping diagrams
Models : AYC073ALE20(LP073CD2A), AYC07EALE20(LP076CD2A), AYC093ALE30(LP093CD3A)
AYC09EALE30(LP096CD3A), AYC123ALE30(LP123CD3A), AYC12EALE30(LP126CD3A)
AYC073ALE30(LP073CD3A), AYH073ALE30(LP073HD3A), AYC07EALE30(LP076CD3A)
AYH07EALE30(LP076HD3A)
Liquid side
Capillary Tube
Th2
Th1
Heat
Exchanger
(Evaporator)
Heat
Exchanger
(Condenser)
C.F.F
Axial Fan
Gas side
LOC.
Product Data
Compressor
Description
High Pressure S/W
2
H/P : 41.8/32.6(kgf/cm G)
2
[595/463(ibf/in G)]
PCB Connector
Th1
Thermistor for indoor Air temperature
CN-IDAT
Th2
Thermistor for evaporator temperature
CN-IDPT
PTAC
37
YA Chassis
6RWU0-02A
Models : AYC153ALE30(LP153CD3A), AYC15EALE30(LP156CD3A), AYC153ALE50(LP153CD5A),
AYH153ALE50(LP153HD5A), AYC15EALE50(LP156CD5A), AYH15EALE50(LP156HD5A)
Liquid side
Capillary Tube
Th2
Th1
Heat
Exchanger
(Evaporator)
Heat
Exchanger
(Condenser)
C.F.F
Axial Fan
Gas side
LOC.
38
Compressor
Description
High Pressure S/W
2
H/P : 44/32(kgf/cm G)
[626/455(ibf/in2G)]
PCB Connector
Th1
Thermistor for indoor Air temperature
CN-IDAT
Th2
Thermistor for evaporator temperature
CN-IDPT
PTAC
Product Data
6RWU0-02A
YA Chassis
Models : AYH073ALE20(LP073HD2A), AYH07EALE20(LP076HD2A), AYH093ALE30(LP093HD3A)
AYH09EALE30(LP096HD3A), AYH123ALE30(LP123HD3A), AYH12EALE30(LP126HD3A)
AYH153ALE30(LP153HD3A), AYH15EALE30(LP156HD3A), AYC073ALE30(LP073CD3A)
AYH073ALE30(LP073HD3A), AYC07EALE30(LP076CD3A), AYH07EALE30(LP076HD3A)
AYC153ALE50(LP153CD5A), AYH153ALE50(LP153HD5A), AYC15EALE50(LP156CD5A)
AYH15EALE50(LP156HD5A),
CAPILLARY TUBE
(HEAT)
CAPILLARY TUBE
(COOL)
CHECK VALVE
Th2
Th3
Th1
Th4
Capi
HEAT
EXCHANGER
(EVAPORATOR)
Th2
Th1
Heat
Exchanger
(Evaporator)
HEAT
EXCHANGER
(CONDENSER)
Heat
Exchanger
(Condense
C.F.F.
Axial Fan
REVERSING VALVE Th4
ACCUMULATOR
H/P
Compressor
Reversing Valve
Accumulator
LOC.
Product Data
High Pressure
Th3 S/W
: 41.8/32.6(kgf/cm2G)
[595/463 (ibf/in2G)
Description
PCB Connector
Th1
Thermistor for indoor air temperature
CN-IDAT
Th2
Thermistor for evaporator temperature
CN-IDPT
Th3
Thermistor for outdoor air temperature
Th4
Thermistor for condenser temperature
PTAC
Cooling
Heating
CN-ODT
39
YA Chassis
6RWU0-02A
1.6 Wiring diagrams
Models : AYC073ALE20(LP073CD2A), AYH073ALE20(LP073HD2A), AYC07EALE20(LP076CD2A), AYH07EALE20(LP076HD2A)
AYC093ALE30(LP093CD3A), AYH093ALE30(LP093HD3A), AYC09EALE30(LP096CD3A), AYH09EALE30(LP096HD3A)
AYC123ALE30(LP123CD3A), AYH123ALE30(LP123HD3A), AYC12EALE30(LP126CD3A), AYH12EALE30(LP126HD3A)
AYC153ALE30(LP153CD3A), AYH153ALE30(LP153HD3A), AYC15EALE30(LP156CD3A), AYH15EALE30(LP156HD3A)
AYC073ALE30(LP073CD3A), AYH073ALE30(LP073HD3A), AYC07EALE30(LP076CD3A), AYH07EALE30(LP076HD3A)
AYC153ALE50(LP153CD5A), AYH153ALE50(LP153HD5A), AYC15EALE50(LP156CD5A), AYH15EALE50(LP156HD5A)
NEUTRAL
LIVE
WH
In part "A", there are 3 types.
BK
Type.1
GN/YL
BK1
RD
BK2
BL
BK3
RD
BK4
BL
OUTDOOR
FAN
MOTOR
OR
TB1
TB2
WH
OR
OR(BR)
YL
Type.2
BK
BK
BL
RD
OR(BR)
YL
BL
OR(BR)
YL
Type.3
INDOOR COIL
THERMISTOR
INDOOR AIR
THERMISTOR
BK
OUTDOOR
FAN
MOTOR
BK
BL
RD
OR(BR)
YL
RD
OR(BR)
YL
In part "B", there are 3 types.
"A"
BK
Type.1
OUTDOOR COIL
THERMISTOR
OR(BR)
YL
F
OUTDOOR AIR
THERMISTOR
BK
BL
RD
OR(BR)
YL
BK
BK
OUTDOOR
FAN
MOTOR
OUTDOOR
FAN
MOTOR
BK
BL
RD
OR(BR)
YL
INDOOR
FAN
MOTOR
BK
BL
RD
OR
BR
YL
BL
RD
OR
BR
YL
BK
BL
RD
OR
BR
YL
RD
OR
BR
YL
BK
BL
RD
OR
BR
YL
OR
BR
YL
GN/YL
HERM
Type.2
R
COMP
BK
RD
BL
CN_PRESS
BK
RD
BL
OLP
"B"
INDOOR
FAN
MOTOR
GN/YL
BK
BL
RD
OR
BR
YL
BL
RD
OR
BR
YL
INDOOR
FAN
MOTOR
BK
GN/YL
Type.3
FAN
CAPACITOR
Pressure
Switch
INDOOR
FAN
MOTOR
BK
BK
BK
BK
BK
BL
GN/YL
P/NO:3850A20594M
CN-AUX_S
CN-THERMO_S
CN-LINK
CN-IDPT
CN-IDAT
CN-ODT
CN-DISP1
CN-IDF
CN-DISP2
CN-4WAY
CN-ICR
CN-ODF
CN-PRESS
40
PTAC
Product Data
6RWU0-02A
YA Chassis
1.7 Capacity tables
Cooling Capacity
AYC073ALE20(LP073CD2A), AYC073ALE30(LP073CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.23
2.38
2.53
2.61
2.83
2.99
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.85
1.94
1.96
1.98
2.03
2.07
77
PI
0.40
0.51
0.55
0.55
0.55
0.65
TC
3.24
3.39
3.55
2.50
3.79
3.84
SHC
1.84
1.87
1.90
1.92
1.97
2.02
89.6
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.98
2.13
2.28
2.36
2.58
2.73
SHC
1.75
1.79
1.82
1.85
1.90
1.96
PI
0.53
0.60
0.63
0.63
0.65
0.66
Outdoor Air Temperature : DB°F
95
TC
1.91
2.06
2.21
2.28
2.51
2.66
SHC
1.68
1.72
1.76
1.78
1.84
1.89
104
PI
0.56
0.62
0.65
0.65
0.68
0.69
TC
1.82
1.97
2.12
2.19
2.42
2.56
SHC
1.62
1.67
1.71
1.73
1.79
1.85
109.4
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.76
1.91
2.06
2.14
2.36
2.51
SHC
1.55
1.60
1.65
1.67
1.73
1.79
TC
2.35
2.50
2.65
2.73
2.95
3.10
SHC
1.77
1.81
1.84
1.87
1.92
1.98
PI
0.53
0.54
0.55
0.55
0.56
0.57
AYC093ALE30(LP093CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.60
2.75
2.90
2.98
3.20
3.36
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.87
1.96
1.98
2.00
2.05
2.09
77
PI
0.58
0.69
0.73
0.73
0.73
0.83
SHC
1.86
1.89
1.92
1.94
1.99
2.04
89.6
PI
0.60
0.70
0.73
0.73
0.74
0.75
PI
0.71
0.78
0.81
0.81
0.83
0.84
Outdoor Air Temperature : DB°F
95
TC
2.28
2.43
2.58
2.65
2.88
3.03
SHC
1.70
1.74
1.78
1.80
1.86
1.91
104
PI
0.74
0.80
0.83
0.83
0.86
0.87
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
Product Data
TC
3.24
3.39
3.55
2.87
3.79
3.84
TC
2.19
2.34
2.49
2.56
2.79
2.93
SHC
1.64
1.69
1.73
1.75
1.81
1.87
109.4
PI
0.60
0.70
0.73
0.73
0.74
0.75
TC
2.13
2.28
2.43
2.51
2.73
2.88
SHC
1.57
1.62
1.67
1.69
1.75
1.81
PI
0.71
0.72
0.73
0.73
0.74
0.75
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
41
YA Chassis
6RWU0-02A
AYC123ALE30(LP123CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
3.43
3.58
3.73
3.81
4.03
4.19
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.65
2.74
2.76
2.78
2.83
2.87
77
PI
0.87
0.98
1.02
1.02
1.02
1.12
TC
3.24
3.39
3.55
3.70
3.79
3.84
SHC
2.64
2.67
2.70
2.72
2.77
2.82
89.6
PI
0.89
0.99
1.02
1.02
1.03
1.04
TC
3.18
3.33
3.48
3.56
3.78
3.93
SHC
2.55
2.59
2.62
2.65
2.70
2.76
PI
1.00
1.07
1.10
1.10
1.12
1.13
Outdoor Air Temperature : DB°F
95
TC
3.11
3.26
3.41
3.48
3.71
3.86
SHC
2.48
2.52
2.56
2.58
2.64
2.69
104
PI
1.03
1.09
1.12
1.12
1.15
1.16
TC
3.02
3.17
3.32
3.39
3.62
3.76
SHC
2.42
2.47
2.51
2.53
2.59
2.65
109.4
PI
0.89
0.99
1.02
1.02
1.03
1.04
TC
2.96
3.11
3.26
3.34
3.56
3.71
SHC
2.35
2.40
2.45
2.47
2.53
2.59
TC
4.09
4.24
4.39
4.47
4.69
4.84
SHC
3.02
3.06
3.09
3.12
3.17
3.23
PI
1.00
1.01
1.02
1.02
1.03
1.04
AYC153ALE30(LP153CD3A), AYC153ALE50(LP153CD5A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
4.34
4.49
4.64
4.72
4.94
5.10
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
3.12
3.21
3.23
3.25
3.30
3.34
77
PI
1.28
1.39
1.43
1.43
1.43
1.53
SHC
3.11
3.14
3.17
3.19
3.24
3.29
89.6
PI
1.30
1.40
1.43
1.43
1.44
1.45
PI
1.41
1.48
1.51
1.51
1.53
1.54
Outdoor Air Temperature : DB°F
95
TC
4.02
4.17
4.32
4.39
4.62
4.77
SHC
2.95
2.99
3.03
3.05
3.11
3.16
104
PI
1.44
1.50
1.53
1.53
1.56
1.57
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
42
TC
3.24
3.39
3.55
4.61
3.79
3.84
TC
3.93
4.08
4.23
4.30
4.53
4.67
SHC
2.89
2.94
2.98
3.00
3.06
3.12
109.4
PI
1.30
1.40
1.43
1.43
1.44
1.45
TC
3.87
4.02
4.17
4.25
4.47
4.62
SHC
2.82
2.87
2.92
2.94
3.00
3.06
PI
1.41
1.42
1.43
1.43
1.44
1.45
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
Product Data
6RWU0-02A
YA Chassis
AYH073ALE20(LP073HD2A), AYH073ALE30(LP073HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.23
2.38
2.53
2.61
2.83
2.99
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.83
1.92
1.94
1.96
2.01
2.05
77
PI
0.41
0.52
0.56
0.56
0.56
0.66
TC
3.24
3.39
3.55
2.50
3.79
3.84
SHC
1.82
1.85
1.88
1.90
1.95
2.00
89.6
PI
0.43
0.53
0.56
0.56
0.57
0.58
TC
1.98
2.13
2.28
2.36
2.58
2.73
SHC
1.73
1.77
1.80
1.83
1.88
1.94
PI
0.54
0.61
0.64
0.64
0.66
0.67
Outdoor Air Temperature : DB°F
95
TC
1.91
2.06
2.21
2.28
2.51
2.66
SHC
1.66
1.70
1.74
1.76
1.82
1.87
104
PI
0.57
0.63
0.66
0.66
0.69
0.70
TC
1.82
1.97
2.12
2.19
2.42
2.56
SHC
1.60
1.65
1.69
1.71
1.77
1.83
109.4
PI
0.43
0.53
0.56
0.56
0.57
0.58
TC
1.76
1.91
2.06
2.14
2.36
2.51
SHC
1.53
1.58
1.63
1.65
1.71
1.77
TC
2.39
2.54
2.69
2.77
2.99
3.14
SHC
1.80
1.84
1.87
1.90
1.95
2.01
PI
0.54
0.55
0.56
0.56
0.57
0.58
AYH093ALE30(LP093HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.64
2.79
2.94
3.02
3.24
3.40
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.90
1.99
2.01
2.03
2.08
2.12
77
PI
0.61
0.64
0.69
0.69
0.69
0.71
SHC
1.89
1.92
1.95
1.97
2.02
2.07
89.6
PI
0.61
0.64
0.69
0.69
0.69
0.71
PI
0.69
0.72
0.77
0.79
0.79
0.81
Outdoor Air Temperature : DB°F
95
TC
2.32
2.47
2.62
2.69
2.92
3.07
SHC
1.73
1.77
1.81
1.83
1.89
1.94
104
PI
0.72
0.78
0.81
0.81
0.84
0.85
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
Product Data
TC
3.24
3.39
3.55
2.91
3.79
3.84
TC
2.23
2.38
2.53
2.60
2.83
2.97
SHC
1.67
1.72
1.76
1.78
1.84
1.90
109.4
PI
0.75
0.76
0.80
0.80
0.82
0.85
TC
2.17
2.32
2.47
2.55
2.77
2.92
SHC
1.60
1.65
1.70
1.72
1.78
1.84
PI
0.76
0.77
0.80
0.80
0.82
0.84
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
43
YA Chassis
6RWU0-02A
AYH123ALE30(LP123HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
3.45
3.60
3.65
3.73
3.95
4.11
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.76
2.79
2.81
2.83
2.88
2.92
77
PI
0.92
1.03
1.07
1.07
1.07
1.08
TC
3.24
3.39
3.55
3.62
3.79
3.84
SHC
2.71
2.73
2.75
2.77
2.82
2.87
89.6
PI
0.94
1.04
1.07
1.07
1.08
1.10
TC
3.20
3.35
3.40
3.48
3.70
3.85
SHC
2.6
2.64
2.67
2.70
2.75
2.81
PI
1.05
1.12
1.15
1.15
1.17
1.18
Outdoor Air Temperature : DB°F
95
TC
2.70
2.85
3.33
3.40
3.63
3.83
SHC
2.22
2.26
2.61
2.63
2.69
2.75
104
PI
1.08
1.14
1.17
1.17
1.20
1.21
TC
3.04
3.09
3.24
3.31
3.54
3.68
SHC
2.46
2.51
2.53
2.58
2.65
2.7
109.4
PI
1.14
1.18
1.19
1.19
1.20
1.21
TC
2.96
3.01
3.14
3.26
3.48
3.63
SHC
2.41
2.46
2.50
2.52
2.58
2.64
TC
4.14
4.29
4.44
4.52
4.74
4.89
SHC
3.05
3.09
3.12
3.15
3.20
3.26
PI
1.15
1.16
1.17
1.17
1.18
1.19
AYH153ALE30(LP153HD3A), AYH153ALE50(LP153HD5A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
4.39
4.54
4.69
4.77
4.99
5.15
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
3.15
3.24
3.26
3.28
3.33
3.37
77
PI
1.55
1.66
1.70
1.70
1.70
1.80
SHC
3.14
3.17
3.20
3.22
3.27
3.32
89.6
PI
1.57
1.67
1.70
1.70
1.71
1.72
PI
1.68
1.75
1.78
1.78
1.80
1.81
Outdoor Air Temperature : DB°F
95
TC
4.07
4.22
4.37
4.44
4.67
4.82
SHC
2.98
3.02
3.06
3.08
3.14
3.19
104
PI
1.71
1.77
1.80
1.80
1.83
1.84
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
44
TC
3.24
3.39
3.55
4.66
3.79
3.84
TC
3.98
4.13
4.28
4.35
4.58
4.72
SHC
2.92
2.97
3.01
3.03
3.09
3.15
109.4
PI
1.57
1.67
1.70
1.70
1.71
1.72
TC
3.92
4.07
4.22
4.30
4.52
4.67
SHC
2.85
2.90
2.95
2.97
3.03
3.09
PI
1.68
1.69
1.70
1.70
1.71
1.72
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
Product Data
6RWU0-02A
YA Chassis
AYC07EALE20(LP076CD2A), AYC07EALE30(LP076CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.12
2.27
2.42
2.50
2.72
2.88
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.78
1.87
1.89
1.91
1.96
2.00
77
PI
0.40
0.51
0.55
0.55
0.55
0.65
TC
3.24
3.39
3.55
2.39
3.79
3.84
SHC
1.77
1.80
1.83
1.85
1.90
1.95
89.6
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.87
2.02
2.17
2.25
2.47
2.62
SHC
1.68
1.72
1.75
1.78
1.83
1.89
PI
0.53
0.60
0.63
0.63
0.65
0.66
Outdoor Air Temperature : DB°F
95
TC
1.80
1.95
2.10
2.17
2.40
2.55
SHC
1.61
1.65
1.69
1.71
1.77
1.82
104
PI
0.56
0.62
0.65
0.65
0.68
0.69
TC
1.71
1.86
2.01
2.08
2.31
2.45
SHC
1.55
1.60
1.64
1.66
1.72
1.78
109.4
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.65
1.80
1.95
2.03
2.25
2.40
SHC
1.48
1.53
1.58
1.60
1.66
1.72
TC
2.45
2.60
2.75
2.83
3.05
3.20
SHC
2.02
2.06
2.09
2.12
2.17
2.23
PI
0.53
0.54
0.55
0.55
0.56
0.57
AYC09EALE30(LP096CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.70
2.85
3.00
3.08
3.30
3.46
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.12
2.21
2.23
2.25
2.30
2.34
77
PI
0.62
0.73
0.77
0.77
0.77
0.87
SHC
2.11
2.14
2.17
2.19
2.24
2.29
89.6
PI
0.64
0.74
0.77
0.77
0.78
0.79
PI
0.75
0.82
0.85
0.85
0.87
0.88
Outdoor Air Temperature : DB°F
95
TC
2.38
2.53
2.68
2.75
2.98
3.13
SHC
1.95
1.99
2.03
2.05
2.11
2.16
104
PI
0.78
0.84
0.87
0.87
0.90
0.91
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
Product Data
TC
3.24
3.39
3.55
2.97
3.79
3.84
TC
2.29
2.44
2.59
2.66
2.89
3.03
SHC
1.89
1.94
1.98
2.00
2.06
2.12
109.4
PI
0.64
0.74
0.77
0.77
0.78
0.79
TC
2.23
2.38
2.53
2.61
2.83
2.98
SHC
1.82
1.87
1.92
1.94
2.00
2.06
PI
0.75
0.76
0.77
0.77
0.78
0.79
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
45
YA Chassis
6RWU0-02A
AYC12EALE30(LP126CD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
3.47
3.62
3.77
3.85
4.07
4.23
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.74
2.83
2.85
2.87
2.92
2.96
77
PI
0.91
1.02
1.06
1.06
1.06
1.16
TC
3.24
3.39
3.55
3.74
3.79
3.84
SHC
2.73
2.76
2.79
2.81
2.86
2.91
89.6
PI
0.93
1.03
1.06
1.06
1.07
1.08
TC
3.22
3.37
3.52
3.60
3.82
3.97
SHC
2.64
2.68
2.71
2.74
2.79
2.85
PI
1.04
1.11
1.14
1.14
1.16
1.17
Outdoor Air Temperature : DB°F
95
TC
3.15
3.30
3.45
3.52
3.75
3.90
SHC
2.57
2.61
2.65
2.67
2.73
2.78
104
PI
1.07
1.13
1.16
1.16
1.19
1.20
TC
3.06
3.21
3.36
3.43
3.66
3.80
SHC
2.51
2.56
2.60
2.62
2.68
2.74
109.4
PI
0.93
1.03
1.06
1.06
1.07
1.08
TC
3.00
3.15
3.30
3.38
3.60
3.75
SHC
2.44
2.49
2.54
2.56
2.62
2.68
TC
3.85
4.00
4.15
4.23
4.45
4.60
SHC
2.87
2.91
2.94
2.97
3.02
3.08
PI
1.04
1.05
1.06
1.06
1.07
1.08
AYC15EALE30(LP156CD3A), AYC15EALE50(LP156CD5A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
4.10
4.25
4.40
4.48
4.70
4.86
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.97
3.06
3.08
3.10
3.15
3.19
77
PI
1.31
1.42
1.46
1.46
1.46
1.56
TC
3.24
3.39
3.55
4.37
3.79
3.84
89.6
PI
1.33
1.43
1.46
1.46
1.47
1.48
PI
1.44
1.51
1.54
1.54
1.56
1.57
Outdoor Air Temperature : DB°F
95
TC
3.78
3.93
4.08
4.15
4.38
4.53
SHC
2.80
2.84
2.88
2.90
2.96
3.01
104
PI
1.47
1.53
1.56
1.56
1.59
1.60
TC
3.69
3.84
3.99
4.06
4.29
4.43
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
46
SHC
2.96
2.99
3.02
3.04
3.09
3.14
SHC
2.74
2.79
2.83
2.85
2.91
2.97
109.4
PI
1.33
1.43
1.46
1.46
1.47
1.48
TC
3.63
3.78
3.93
4.01
4.23
4.38
SHC
2.67
2.72
2.77
2.79
2.85
2.91
PI
1.44
1.45
1.46
1.46
1.47
1.48
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
Product Data
6RWU0-02A
YA Chassis
AYH07EALE20(LP076HD2A), AYH07EALE30(LP076HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.14
2.29
2.44
2.52
2.74
2.90
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
1.75
1.84
1.86
1.88
1.93
1.97
77
PI
0.40
0.51
0.55
0.55
0.55
0.65
TC
3.24
3.39
3.55
2.41
3.79
3.84
SHC
1.74
1.77
1.80
1.82
1.87
1.92
89.6
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.89
2.04
2.19
2.27
2.49
2.64
SHC
1.65
1.69
1.72
1.75
1.80
1.86
PI
0.53
0.60
0.63
0.63
0.65
0.66
Outdoor Air Temperature : DB°F
95
TC
1.82
1.97
2.12
2.19
2.42
2.57
SHC
1.58
1.62
1.66
1.68
1.74
1.79
104
PI
0.56
0.62
0.65
0.65
0.68
0.69
TC
1.73
1.88
2.03
2.10
2.33
2.47
SHC
1.52
1.57
1.61
1.63
1.69
1.75
109.4
PI
0.42
0.52
0.55
0.55
0.56
0.57
TC
1.67
1.82
1.97
2.05
2.27
2.42
SHC
1.45
1.50
1.55
1.57
1.63
1.69
TC
2.41
2.56
2.71
2.79
3.01
3.16
SHC
1.99
2.03
2.06
2.09
2.14
2.20
PI
0.53
0.54
0.55
0.55
0.56
0.57
AYH09EALE30(LP096HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
2.66
2.81
2.96
3.04
3.26
3.42
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.09
2.18
2.20
2.22
2.27
2.31
77
PI
0.60
0.71
0.75
0.75
0.75
0.85
SHC
2.08
2.11
2.14
2.16
2.21
2.26
89.6
PI
0.62
0.72
0.75
0.75
0.76
0.77
PI
0.73
0.80
0.83
0.83
0.85
0.86
Outdoor Air Temperature : DB°F
95
TC
2.34
2.49
2.64
2.71
2.94
3.09
SHC
1.92
1.96
2.00
2.02
2.08
2.13
104
PI
0.76
0.82
0.85
0.85
0.88
0.89
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
Product Data
TC
3.24
3.39
3.55
2.93
3.79
3.84
TC
2.25
2.40
2.55
2.62
2.85
2.99
SHC
1.86
1.91
1.95
1.97
2.03
2.09
109.4
PI
0.62
0.72
0.75
0.75
0.76
0.77
TC
2.19
2.34
2.49
2.57
2.79
2.94
SHC
1.79
1.84
1.89
1.91
1.97
2.03
PI
0.73
0.74
0.75
0.75
0.76
0.77
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
47
YA Chassis
6RWU0-02A
AYH12EALE30(LP126HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
3.51
3.66
3.81
3.89
4.11
4.27
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
2.63
2.72
2.74
2.76
2.81
2.85
77
PI
0.87
0.98
1.02
1.02
1.02
1.12
TC
3.24
3.39
3.55
3.78
3.79
3.84
SHC
2.62
2.65
2.68
2.70
2.75
2.80
89.6
PI
0.89
0.99
1.02
1.02
1.03
1.04
TC
3.26
3.41
3.56
3.64
3.86
4.01
SHC
2.53
2.57
2.60
2.63
2.68
2.74
PI
0.10
1.07
1.10
1.10
1.12
1.13
Outdoor Air Temperature : DB°F
95
TC
3.19
3.34
3.49
3.56
3.79
3.94
SHC
2.46
2.50
2.54
2.56
2.62
2.67
104
PI
1.03
1.09
1.12
1.12
1.15
1.16
TC
3.10
3.25
3.40
3.47
3.70
3.84
SHC
2.40
2.45
2.49
2.51
2.57
2.63
109.4
PI
0.89
0.99
1.02
1.02
1.03
1.039
TC
3.04
3.19
3.34
3.42
3.64
3.79
SHC
2.33
2.38
2.43
2.45
2.51
2.57
TC
4.17
4.32
4.47
4.55
4.77
4.92
SHC
3.04
3.08
3.11
3.14
3.19
3.25
PI
0.10
1.01
1.02
1.02
1.03
1.04
AYH15EALE30(LP156HD3A)
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
Outdoor Air Temperature : DB°F
68
TC
4.42
4.57
4.72
4.80
5.02
5.18
Indoor Air
Temperature
WB°F
57.2
60.8
64.4
66.2
71.6
75.2
DB°F
68.0
71.6
77.0
80.6
86.0
89.6
SHC
3.14
3.23
3.25
3.27
3.32
3.36
77
PI
1.321
1.431
1.471
1.471
1.471
1.571
SHC
3.13
3.16
3.19
3.21
3.26
3.31
89.6
PI
1.34
1.44
1.47
1.47
1.48
1.49
PI
1.45
1.52
1.55
1.55
1.57
1.58
Outdoor Air Temperature : DB°F
95
TC
4.10
4.25
4.40
4.47
4.70
4.85
SHC
2.97
3.01
3.05
3.07
3.13
3.18
104
PI
1.48
1.54
1.57
1.57
1.60
1.61
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
SHC : Sensible Heating Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
48
TC
3.24
3.39
3.55
4.69
3.79
3.84
TC
4.01
4.16
4.31
4.38
4.61
4.75
SHC
2.91
2.96
3.00
3.02
3.08
3.14
109.4
PI
1.34
1.44
1.47
1.47
1.48
1.49
TC
3.95
4.10
4.25
4.33
4.55
4.70
SHC
2.84
2.89
2.94
2.96
3.02
3.08
PI
1.45
1.46
1.47
1.47
1.48
1.49
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
3. Direct interpolation is permissible. Do not extrapolate
PTAC
Product Data
6RWU0-02A
YA Chassis
Heating Capacity
AYH073ALE20(LP073HD2A), AYH073ALE30(LP073HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
1.22
1.23
1.23
1.23
1.22
1.20
23
PI
0.45
0.46
0.48
0.48
0.49
0.51
TC
1.44
1.45
1.45
1.45
1.45
1.41
32
PI
0.47
0.49
0.51
0.52
0.52
0.54
TC
1.63
1.63
1.62
1.62
1.61
1.58
42.8
PI
0.52
0.53
0.55
0.56
0.57
0.58
TC
1.95
1.93
1.90
1.88
1.86
1.83
50
PI
0.56
0.58
0.59
0.60
0.60
0.61
TC
2.14
2.09
2.07
2.07
2.08
2.09
59
PI
0.59
0.60
0.61
0.62
0.62
0.63
TC
2.42
2.42
2.43
2.40
2.37
2.33
PI
0.63
0.64
0.65
0.65
0.66
0.66
AYH093ALE30(LP093HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
1.76
1.77
1.77
1.77
1.76
1.74
23
PI
0.63
0.64
0.66
0.66
0.67
0.69
TC
1.98
1.99
1.99
1.99
1.99
1.95
32
PI
0.65
0.67
0.69
0.70
0.70
0.72
TC
2.17
2.17
2.16
2.16
2.15
2.12
42.8
PI
0.70
0.71
0.73
0.74
0.75
0.76
TC
2.49
2.47
2.44
2.42
2.40
2.37
50
PI
0.74
0.76
0.77
0.78
0.78
0.79
TC
2.68
2.63
2.61
2.61
2.62
2.63
59
PI
0.77
0.78
0.79
0.80
0.80
0.81
TC
2.96
2.96
2.97
2.94
2.91
2.87
PI
0.96
0.97
0.98
0.99
0.99
1.00
TC
3.68
3.68
3.69
3.66
3.63
3.59
PI
0.81
0.82
0.83
0.83
0.84
0.84
AYH123ALE30(LP123HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
2.48
2.49
2.49
2.49
2.48
2.46
23
PI
0.82
0.83
0.85
0.85
0.86
0.88
TC
2.70
2.71
2.71
2.71
2.71
2.67
32
PI
0.84
0.86
0.88
0.89
0.89
0.91
TC
2.89
2.89
2.88
2.88
2.87
2.84
42.8
PI
0.89
0.90
0.92
0.93
0.94
0.95
TC
3.21
3.19
3.16
3.14
3.12
3.09
50
PI
0.93
0.95
0.96
0.97
0.97
0.98
TC
3.40
3.35
3.33
3.33
3.34
3.35
59
PI
1.00
1.01
1.02
1.02
1.03
1.03
AYH153ALE30(LP153HD3A), AYH153ALE50(LP153HD5A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
2.88
2.89
2.89
2.89
2.88
2.86
23
PI
1.21
1.22
1.24
1.24
1.25
1.27
TC
3.10
3.11
3.11
3.11
3.11
3.07
32
PI
1.23
1.25
1.27
1.28
1.28
1.30
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
Product Data
TC
3.29
3.29
3.28
3.28
3.27
3.24
42.8
PI
1.28
1.29
1.31
1.32
1.33
1.34
TC
3.61
3.59
3.56
3.54
3.52
3.49
50
PI
1.32
1.34
1.35
1.36
1.36
1.37
TC
3.80
3.75
3.73
3.73
3.74
3.75
59
PI
1.35
1.36
1.37
1.38
1.38
1.39
TC
4.08
4.08
4.09
4.06
4.03
3.99
PI
1.39
1.40
1.41
1.41
1.42
1.42
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
PTAC
49
YA Chassis
6RWU0-02A
AYH07EALE20(LP076HD2A), AYH07EALE30(LP076HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
1.10
1.11
1.11
1.11
1.10
1.08
23
PI
0.44
0.45
0.47
0.47
0.48
0.50
TC
1.32
1.33
1.33
1.33
1.33
1.29
32
PI
0.46
0.48
0.50
0.51
0.51
0.53
TC
1.51
1.51
1.50
1.50
1.49
1.46
42.8
PI
0.51
0.52
0.54
0.55
0.56
0.57
TC
1.83
1.81
1.78
7.78
1.74
1.71
50
PI
0.55
0.57
0.58
0.59
0.59
0.60
TC
2.02
1.97
1.95
1.95
1.96
1.97
59
PI
0.58
0.59
0.60
0.61
0.61
0.62
TC
2.30
2.30
2.31
2.28
2.25
2.21
PI
0.76
0.77
0.78
0.79
0.79
0.80
TC
2.94
2.94
2.95
2.92
2.89
2.85
PI
0.97
0.98
0.99
1.00
1.00
1.01
TC
3.67
3.67
3.68
3.65
3.62
3.58
PI
1.34
1.35
1.36
1.37
1.37
1.38
TC
4.09
4.09
4.10
4.07
4.04
4.00
PI
0.62
0.63
0.64
0.64
0.65
0.65
AYH09EALE30(LP096HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
1.74
1.75
1.75
1.75
1.74
1.72
23
PI
0.62
0.63
0.65
0.65
0.66
0.68
TC
1.96
1.97
1.97
1.97
1.97
1.93
32
PI
0.64
0.66
0.68
0.69
0.69
0.71
TC
2.15
2.15
2.14
2.14
2.13
2.10
42.8
PI
0.69
0.70
0.72
0.73
0.74
0.75
TC
2.47
2.45
2.42
7.78
2.38
2.35
50
PI
0.73
0.75
0.76
0.77
0.77
0.78
TC
2.66
2.61
2.59
2.59
2.60
2.61
59
PI
0.80
0.81
0.82
0.82
0.83
0.83
AYH12EALE30(LP126HD3A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
2.47
2.48
2.48
2.48
2.47
2.45
23
PI
0.83
0.84
0.86
0.86
0.87
0.89
TC
2.69
2.70
2.70
2.70
2.70
2.66
32
PI
0.85
0.87
0.89
0.90
0.90
0.92
TC
2.88
2.88
2.87
2.87
2.86
2.83
42.8
PI
0.90
0.91
0.93
0.94
0.95
0.96
TC
3.20
3.18
3.15
7.78
3.11
3.08
50
PI
0.94
0.96
0.97
0.98
0.98
0.99
TC
3.39
3.34
3.32
3.32
3.33
3.34
59
PI
1.01
1.02
1.03
1.03
1.04
1.04
AYH15EALE30(LP156HD3A), AYH15EALE50(LP156HD5A)
Outdoor Air Temperature : WB°F
Indoor Air
Temperature
DB°F
60.8
64.4
68.0
69.8
71.6
75.2
14
TC
2.89
2.90
2.90
2.90
2.89
2.87
23
PI
1.20
1.21
1.23
1.23
1.24
1.26
TC
3.11
3.12
3.12
3.12
3.12
3.08
32
PI
1.22
1.24
1.26
1.27
1.27
1.29
Symbol
DB : Dry Bulb Temperature
[°F]
WB : Wet Bulb Temperature
[°F]
TC : Total Capacity
[kW]
PI : Power Input
[kW]
(Comp.+ indoor fan motor + outdoor fan motor)
50
TC
3.30
3.30
3.29
3.29
3.28
3.25
42.8
PI
1.27
1.28
1.30
1.31
1.32
1.33
TC
3.62
3.60
3.57
7.78
3.53
3.50
50
PI
1.31
1.33
1.34
1.35
1.35
1.36
TC
3.81
3.76
3.74
3.74
3.75
3.76
59
PI
1.38
1.39
1.40
1.40
1.41
1.41
Notes
1. All capacities are net, evaporator fan motor heat is deducted.
2.
Indicates nominal maximum capacity.
PTAC
Product Data
6RWU0-02A
YA Chassis
1.8 Operation range
Heating
24
(75°F)
Outdoor Unit [°C DB]
Outdoor Unit [°C DB]
46
(115°F)
Continuous
operation
21
(70°F)
Operative
12
(54°F)
Continuous
operation
Electric Heater
-20
(-4°F)
12(54°F)
30(86°F)
Indoor Unit [°C DB]
Product Data
1
(34°F)
Warming up
Operation
Cooling
12(54°F)
30(86°F)
Indoor Unit [°C DB]
PTAC
51
Control device
6RWU0-02A
2 Control Device
2.1 Electronic Controls (Micom models)
The Electronic controls and the panel display is as shown below.
FAN SPEED
• Every time you push this button, it cycles through the settings as follows:
{High(F2) ’ Low(F1) ’ High(F2) ’ Low(F1)}
* For Cooling only models(for some specific
regions), the “HEAT” option is not there in the
panel display(escutcheon).
POWER
• To turn the air conditioner ON, push this button.
To turn the air conditioner OFF, push the button
again.
• This button takes priority over any other button.
MODE
- Push this button to cycle through the modes from COOL ’ FAN
’ HEAT’ COOL.
TEMPERATURE SETTING
- COOL
• Fan runs continually for normal cooling operation.
- ENERGY SAVER
• The fan stops when the compressor stops cooling.
Approximately every 3 minutes the fan will turn on and the unit
will check the room air temperature to determine if cooling is
needed.
• Use this button to automatically control the
temperature of the room.
The temperature can be set within a range of 54
F to 86 F by increments of 2 F.
• The setting appears in the display.
- FAN
• Fan operation without heating or cooling.
- HEAT
• Fan runs continually for normal heating operation.
TIMER
- SHUT-OFF TIME
• You will usually use shut-off time while you sleep.
• If unit is running, use Timer to set number of hours until shut-off.
• For your sleeping comfort, once Time is set, the Temperature setting will raise 2 F after 30 minutes, and once again
after another 30 minutes.
• Push Timer to cycle through the settings from 1 Hour ’ 2 Hours ’ ... ’ 12 Hours maximum.
52
PTAC
Product Data
6RWU0-02A
Control device
Additional Controls (Micom models)
Additional controls can be seen after removing the front grille and the
option cover of the control box.
To remove the front grille, pull out the bottom at both the sides and then lift
up the grille as shown in the figure on the right.
And to install the front grille back to itʼs original position, place the tabs over
the top of the unit and push the bottom of the front grille until the clips snap
into place.
Now the additional controls are located behind the option cover of the control box. The standard settings are in the "OFF" position as shown in the
figure below. The authorized personnel has to check the switches and
ensure that the switches are in the desired position.
REMOTE ON
ON
ON
ON
ON
OFF
LOCAL OFF OFF OFF OFF
1
2
3
4
5
Remote/Local
Energy Saver
Temperature Limit 1
Temperature Limit 2
Temperature Limit 3
PTAC/PTHP
UNIT TYPE
OFF
6
OFF
7
Here in the figure above the three Temperature limit switches ( Temperature Limit 1, Temperature Limit 2 and Temperature
Limit 3) can provide various temperature ranges of operation by means of different combinations of dip switches as shown
in the Table below. These temperature limits prevent overcooling and over heating, by limiting the lowest temperature for
cooling and by limiting the highest temperature for heating respectively, thereby reducing energy costs.
Temperature
Limit #1
Temperature
Limit #2
Temperature
Limit #3
OFF
OFF
OFF
Cooling Operation
Heating Operation
Lowest Temp.
54 F (12.2 C)
Highest Temp.
86 F (30.0 C)
Lowest Temp.
54 F (12.2 C)
Highest Temp.
86 F (30.0 C)
ON
OFF
OFF
56 F (13.3 C)
86 F (30.0 C)
54 F (12.2 C)
84 F (28.9 C)
OFF
ON
OFF
58 F (14.4 C)
86 F (30.0 C)
54 F (12.2 C)
82 F (27.8 C)
ON
ON
OFF
60 F (15.5 C)
86 F (30.0 C)
54 F (12.2 C)
80 F (26.7 C)
OFF
OFF
ON
62 F (16.6 C)
86 F (30.0 C)
54 F (12.2 C)
78 F (25.5 C)
ON
OFF
ON
64 F (17.7 C)
86 F (30.0 C)
54 F (12.2 C)
76 F (24.4 C)
OFF
ON
ON
66 F (18.9 C)
86 F (30.0 C)
54 F (12.2 C)
74 F (23.3 C)
ON
ON
ON
68 F (20.0 C)
86 F (30.0 C)
54 F (12.2 C)
72 F (22.2 C)
#6
OFF
OFF
#7
OFF
ON
Unit Type
Cooling+Electric Heater+Heat Pump
Cooling+Electric Heater
ON
ON
OFF
ON
Heat Pump Only
Cooling Only
Note:
This Temperature limit option is not available with the Remote Wall Thermostat.
Product Data
PTAC
53
Control device
6RWU0-02A
Remote / Local Control
When the Remote/Local dip switch #1 is "ON", it allows the unit to operate by means of Remote Wall Thermostat Control.
When this option is in function, the unit cannot be controlled by means of the knobs.
Energy Saver
When the Energy Saver dip switch #2 is in the "On" position, the indoor fan operates when the compressor is running and
the fan stops operating when the compressor stops running. But when the switch is in the "Off" position, the indoor fan runs
continuously irrespective of the fact that the compressor is running or not.
Front Desk Control
When the paired wire is connected to the two connectors FD2 and FD1(refer to
the figure below), the unit can be turned ON and OFF with a switch located at the
Front Desk Control Panel. When the Front Desk switch is "On", the unit operates
by means of the setting at the Front Desk .And when the Front Desk switch is
"Off", the air conditioning unit operates by the settings made at the Unit itself. In
the "Off" position the Front Desk control cannot be exercised.
Motion Sensor
Motion Sensor
Door Switch
Door Switch
Front Desk Control
Front Desk Control
Note: The following figures show
wiring schematics for heat pump
and straight cool units with electric
heat, respectively.
Wiring Schematic for
Remote Heat Pump
FD2 FD1 DR2 DR1 MS2 MS1
(Molex Housing Spec 396-06V)
(recommended wire lengths)
Wire # AWG
#22
#20
#18
#16
54
Wiring Schematic for
Straight Cool Unit.
Maximum Length
600ft(180m)
900ft(270m)
1500ft(450m)
2000ft(610m)
PTAC
Product Data
6RWU0-02A
Control device
Remote Wall Thermostat
When the wires are connected, the unit will be controlled by a remote wall thermostat.
The thermostat connections supply the 24 Volt AC. When you install the digital/electronic thermostat, you must set it to 24
Volt AC. See the installation instruction in this manual for the Remote Wall Thermostat.
24 Volt-N
24 Volt-L
Compressor
Heater
Reversing Valve
High Fan
Low Fan
GL GH O
W
Y
R
C
(Molex Housing Spec 396-07V)
Self Diagnosis
If the unit has a malfunction, a green OPERATION LED located on the Display PCB of the unit, indicates the errors.
The error codes are displayed on the Table below :ON
Normal
OFF
No power / failure of board
Fault Codes
CH 01
Indoor Air Thermistor error
CH 02
Indoor Coil Thermistor error
CH 03
Outdoor Air Thermistor error(PIHP only)
CH 04
Outdoor Coil Thermistor error(PIHP only)
CH 05
Mode Error
CH 06
Setpoint Error
CH 07
Bad Thermistor Wiring
CH 09
Pressure Switch Error
Product Data
PTAC
55
6RWU0-02A
56
PTAC
Product Data
Part 3 Design and Installation
1 General installation procedure ..........................................................58
2 Installation of unit ...............................................................................59
2.1 Safety precautions............................................................................................59
2.2 Points for explanation about operations ...........................................................62
2.3 Selecting installation site for the unit ................................................................63
2.4 Installation of Unit .............................................................................................63
2.5 Wall sleeve installation .....................................................................................65
Design and installation
PTAC
57
General Installation Procedure
6RWU0-02A
1. General Installation Procedure
Installation Procedure
Determination of work scope
Selection of suitable location
for unit
Remarks
……
……
Installation of Wall sleeve
……
Installation of indoor unit
……
Drain pipe work
……
Insulation works
……
Fit Outer Grille
……
Transfer charge to customer
……
58
Check and confirm required load calculation, model
selection etc…
The base or the foundation of the Air-Conditioner
should be firm and vibration proof and air-flow should
not be restricted on either side of the unit - front and
the back.
Check out the Wall opening to make sure the Wall
sleeve fits properly.
Check the size of the selected model and make sure
the fitting is made correctly.
Make sure the drain pipe is big enough and adjust it
to a downward gradient.
The Air-Conditioner supporting parts should secure
firmly to the wood, masonry and metal.
The Air Conditioner should be protected from
physical contact with animals or any external object.
Educate the customer or the operator on how
to operate the Air-Conditioner and the utility
of the manuals.
PTAC
General installation guideline
6RWU0-02A
Installation of unit
2. Installation of unit
2.1 Safety precautions
To prevent injury to the user or other people and property damage, the following instructions must be followed.
n Incorrect operation due to ignoring instructions will cause harm or damage. The seriousness is classified by the following
indications.
n Because of the weight of the product, it is recommended that you have a helper to assist in the installation.
WARNING
This symbol indicates the possibility of death or serious injury.
CAUTION
This symbol indicates the possibility of injury or damage to properties only.
n Meanings of symbols used in this manual are as shown below.
Be sure not to do.
Be sure to follow the instruction.
WARNING
Do not use a damaged power cord, plug or loose socket.
• Otherwise there is risk of fire or electric shock.
Always plug onto a grounded outlet.
• Otherwise there is risk of fire or electric shock.
Do not extend or modify the power cord length.
• Otherwise there is risk of fire or electric shock due to heat generation.
Do not install, remove or reinstall the unit by yourself.
• Otherwise there is risk of fire, electric shock, explosion or injury.
Be cautious when unpacking and installing the product.
• Sharp edges could cause injury. Especially be careful of the case edges and the fins on the condenser and evaporator.
Do not store or use flammable gas or combustibles near the Air-Conditioner.
• Otherwise there is risk of fire, explosion or failure of product.
Be sure the installation area does not deteriorate with time.
• If the base collapses then the Air- Conditioner might fall causing property damage, product failure and personal injury.
Do not place heavy object on the power cord and take care that the cord is not pressed.
• Otherwise there is a danger of fire or electric shock.
Do not share the outlet with other appliances.
• Otherwise there is a risk of fire or electric shock due to heat generation.
While unplugging, hold the head of the plug and do not touch it with wet hands.
• Otherwise there is a risk of fire or electric shock.
Do not place the power cord near a heater.
• Otherwise there is a risk of fire or electric shock.
Do not allow water to run into electric parts.
• Otherwise there is a risk of electric shock or failure of the unit.
Use a soft cloth to clean. Do not use wax, thinner or a strong detergent.
• Otherwise the appearance of the Air-Conditioner may deteriorate, change color or develop flaws on the surface.
Unplug the unit if any strange sound, odor or smoke comes out of it.
• Otherwise there is a risk of fire or electric shock.
Installation
PTAC
59
Installation of unit
6RWU0-02A
Do not open the inlet grille of the product during operation.
• Otherwise it may cause electric shock and failure.
If water enters the product, turn off the power switch, remove the power plug from the socket and contact the
service center immediately.
• Otherwise it may cause electric shock and failure of the product.
Ensure proper ventilation in the room when using this appliance together with a stove.
• Otherwise there may be a shortage of oxygen.
Before cleaning the unit turn off the power to the unit.
• The fan blows at a high speed and may cause injury. Also the appliance may cause electric shock.
Turn off the main power switch when the unit is not used for a long time.
• We can prevent accidental startup and thereby prevent injury.
Do not operate or stop the unit by inserting or pulling out the power plug.
• Otherwise it may cause electric shock or fire due to heat generation.
Do not use a damaged power cord and do not use an unspecified power cord.
• Otherwise it may cause electric shock or fire.
Do not operate the unit with wet hands or in a damp environment.
• Otherwise it may cause electric shock or fire.
Always hold the plug by the head while plugging or unplugging it onto the socket.
• Otherwise it may cause electric shock or it may damage the power cord.
When there is a gas leakage, open the windows for ventilation before operating the unit.
• There is a risk of fire or explosion.
Take care not to touch the metal parts of the Air-Conditioner while removing the filter.
• Presence of sharp metal parts may cause injury.
During installation and un installation always contact the dealer of an Authorized service center.
• Otherwise there is a risk of fire, electric shock, explosion or injury.
Be sure only to use those parts which are listed in the service parts list. Never attempt to modify the equipment.
• Use of parts not listed in the service list can cause an electrical shock, excessive heat generation or fire.
Safely dispose off the packing materials.
• Things like screws, nails, batteries, etc….can cause injury to a person. Take care to throw away the plastic packaging
bags so that children may not play with them.
Do not touch, operate or repair the product with wet hands.
• Otherwise there is a risk of electric shock or fire.
Do not allow water to run into electric parts. Install the unit away from water sources.
• Otherwise there is a risk of fire, electric shock or failure of the product.
If any strange sound, smell or smoke comes out of the product, immediately disconnect the power supply
and contact the nearest service center.
• Otherwise there is a risk of fire, electric shock or failure of the product.
Do not use the socket if it is loose or damaged.
• Otherwise it may cause shock or electric fire.
Keep fire arms away from the unit.
• Otherwise it may cause fire.
Do not use the power cord close to heating tools.
• Otherwise it may cause an electric shock or fire.
Do not disassemble or modify the products randomly.
• Otherwise it may cause an electric shock or failure of the product.
60
PTAC
Installation
6RWU0-02A
Installation of unit
CAUTION
Install the product in such a way that the noise or hot wind from the outdoor unit may not cause any disturbance to neighbors.
• Otherwise there may be disputes with neighbors.
During installation the unit should be horizontally leveled.
• Otherwise it may cause vibration or water leakage.
Do not allow direct exposure of pet animals and house plants to air flow from the unit.
• Otherwise it may cause injury to them.
Do not block the flow of air into the inlet and the outlet.
• Otherwise it may lead to failure of the product.
Use a soft cloth to clean. Do not use wax, thinner or a strong detergent.
• Otherwise the appearance of the air conditioner may deteriorate, change color and develop flaws on the surface.
Do not step on the unit and do not place anything above it.
• Otherwise the unit may fall and cause personal injury.
Always place the filter securely and clean it every two weeks.
• Operation without filters may cause the unit to fail.
Do not drink water drained by the air-conditioner.
• The drained water contains contaminants and can make you sick.
Be cautious so as not to touch the sharp edges during installation.
• Otherwise it may cause injury.
Avoid excessive cooling and ventilate the room at times.
• Otherwise it may cause personal injury.
Do not try to lift the unit alone.
• Avoid personal injury.
Do not install the product where it is exposed to sea wind (salt spray) directly.
• Otherwise it may corrode the product. Corrosion, particularly on the condenser and evaporator fins, could cause product
malfunction or inefficient operation.
Install the drain hose so as to ensure that the water is drained properly.
• Otherwise there might be water leakage.
Replace all the batteries in the remote control with new ones of the same type.
Do not mix old and new batteries or different type of batteries.
• Otherwise there is a risk of fire or explosion.
If the liquid from the batteries gets onto your skin or clothes, wash it well with clean water. Do not use the
remote controller if the batteries have leaked.
• Otherwise the chemicals in the batteries may cause burns or other health hazards.
Do not use the product for purposes such as preserving foods, works of art, etc…It is a consumer air conditioner not a precision refrigeration system.
• Otherwise there is risk of damage or loss to property.
Do not recharge or disassemble the batteries. Do not dispose off batteries in fire.
• Otherwise the batteries may burn or explode.
Do not clean the air conditioner using water.
• Water may enter the unit and degrade the insulation. Hence, it may cause an electric shock.
Ventilate well when used near a stove.
• Otherwise there may be a lack of Oxygen in the room.
Do not put pets or house plants where it is exposed to direct air-flow.
• It is injurious to the health of the pet and the plant.
Installation
PTAC
61
Installation of unit
6RWU0-02A
2.2 Points for explanation about operations
The items listed under the WARNING and CAUTION list in the operation manual are the items pertaining to possibilities for
bodily injury and material damage in addition to the general usage of the product. Accordingly, it is necessary that you make
a full explanation about the described contents and also ask your customers to read the owners manual.
NOTE
to the installer
Be sure to instruct customers how to properly operate the unit (especially cleaning filters, operating different functions and
adjusting the temperature) by having them carry out operations themselves while looking at the manual.
• Be sure to read this manual before installing the indoor unit.
• Entrust the duty of installation to the place of purchase or an authorized serviceman. Improper installation could lead to
damage of the product, bodily injury , electric shock or fire.
• Use parts only provided along with the unit or parts satisfying required specifications.
Unspecified parts could cause the unit to fall out of place, or could lead to leaks and in the worst cases, electric shock or
fire.
2.3 Selecting installation site for the unit
Select an installation site where the following conditions are fulfilled and that meet your customers approval.
1) Location should be strong enough to bear the weight of the unit.
2) Location should be accessible to inspection and service in future.
3) Location should allow suitable gradient for the drainage of water.
4) Location free from electrical noise.
5) Location allowing optimum air distribution without restricting air flow.
6) Location having no risk of flammable gas leakage.
7) Location free from any machinery emitting electromagnetic waves which may disturb the control system thus causing the
unit to malfunction.
8) Location should be free from flammable gases, carbon fiber or ignitable dust suspensions in the air or in areas where
volatile flames like gasoline and thinner are handled. Operating the unit in such conditions may lead to fire.
9) Finally conform to local rules and regulations for air conditioner installation.
62
PTAC
Installation
6RWU0-02A
Installation of unit
2.4 Installation of unit
The PTAC and its components are as shown below.
12
1
1
3
1
13
1
1
4
1
2
1
5
1
6
1
8
10
1
14
11
1
7
1
9
1. WALL SLEEVE
2. FRONT GRILLE
3. AIR FILTER
4. AIR INTAKE
5. AIR DISCHARGE
6. VERTICAL AIR DEFLECTOR
(HORIZONTAL LOUVER)
7. EVAPORATOR
8. CONTROL PANEL
9. POWER CORD
10. COMPRESSOR
11. BASE PAN
12. BRACE
13. CONDENSER
14. OUTDOOR GRILLE (ARCHITECTURAL GRILLE)
Use the correct wall sleeve and outdoor grille
This unit is designed to be installed in the insulated wall sleeve.
When you place the unit into the existing sleeve, the wall sleeve
used to mount the new unit must be in good structural condition
and have the outdoor grille that securely attaches to the sleeve
or the flange of the sleeve to secure the new air conditioner.
Outdoor Grille
Wall Sleeve
Unit
With the LG sleeve, you can maintain the best performance of
the new air conditioner.
If you keep the existing sleeve, you run the risk of poor performance or product failure. This is not covered
under the LG warranty.
Remove the vertical deflectors in the existing grille to reduce
condenser air recirculation that can cause the unit to poor cooling or heating and component failure.
Installation
PTAC
Front Grille
(Shipped with the unit)
63
Installation of unit
6RWU0-02A
CAUTION
1,066 mm
(42")
• There are sharp edges that can cause serious cuts.
• When lifting the air conditioner.
Use 2 people to lift.(the unit is heavy)
For existing sleeve, you should measure the wall sleeve
dimensions.
Install the new air conditioner according to these installation
instructions to achieve the best performence. The wall sleeve
used to mount the new air conditioner must be in good structural condition and have a rear grille that securely attaches to
the sleeve or the flange of the sleeve to secure the new air
conditioner.
406 mm
(16")
349 mm
(13 3/4")
505 mm
(20")
• To avoid vibration and noise, make sure the unit is installed
securely and firmly.
Dimension of sleeve assembly (optional)
42"
1/2" SQ. HOLE (2 REQ'D.)
13-
When installing the sleeve, make certain there is nothing within 20" of the back that would interfere with heat radiation and
exhaust air flow.
3/4
"
2-3/4"
1/2"
1-1/2" TYP
16"
5-5/8"
4"
6"
36"
21"
1/2" DIA.
HOLE (3 REQ'D.)
Wall opening 16-1/4"x42-1/4"
Recommended Insulation strip must be attached to prevent the re-circulation of exhaust
air to inward side from either side of condenser space. The insulation
strip is provided with the box.
Refer to the diagram below.
GRILLE
13-3/4"
INSULATION
WALL
COOLED
AIR
TOP VIEW
SLEEVE
HEAT
RADIATION
INTAKE
AIR
42"
1/4" Bubble
of the level
ROOM
CABINET
WALL
1) Take out the insulation strip from the upper packing.
2) Attach the insulation strip onto the rear upper side of the
wall sleeve.
3) To improve the unitʼs energy efficiency, it is recommended
to change the outer grille with a plastic grille.(This is optional for old models but New models readily comes with the
plastic rear grille)
4) Insulation strip prevents the exhaust air from re-entering
from either side of condenser space which may decrease
the cooling efficiency of condenser.
64
PTAC
280 mm
(11")
Front
Over 20"
Insulation Strip
Sleeve
Rear
Installation
6RWU0-02A
Installation of unit
2.5 WALL SLEEVE INSTALLATION
Wall Case Installation Data
General
Generally, units are installed 3" to 5" above the floor
(flush to finished floor installation is possible) as near to
the center of the room as possible; underneath a window or a glass panel is typical. Normal installation of
the wall case allows installation flexibility; from flush
with the finished interior wall to a minimum of 1/4" of the
wall case extending beyond the finished exterior of the
building.
Special consideration must be given to installations
where the wall case does not extend a minimum of 1/4"
beyond the finished exterior wall.
Regardless of the installation, there are several things
to consider when selecting a location for installing the
unit. For instance, drapery location could interfere with
air discharge, and placement of furniture may have an
impact on the performance of the unit. The following
information is intended to minimize installation problems and assure you of a trouble-free installation.
Refer to last page for required wall opening dimensions. Minimum recommended interior and exterior
case projection for standard wall thicknesses are
shown in the drawings in this manual. The case may be
installed flush with the finished indoor wall.
framing, moving electrical outlets, and other expensive
modifications.
For existing construction it is important that carpentry,
masonry and electrical work be performed by competent, qualified personnel. Since installations in existing construction may involve removal of building
material from the structure, location of the wall
case must be precisely done.
42"
1/2" SQ. HOLE (2 REQ'D.)
13-
3
/4"
2-3/4"
1-1/2" TYP
1/2"
16"
4"
6"
36"
21"
1/2" DIA.
HOLE (3 REQ'D.)
Wall opening 16-1/4"x42-1/4"
Mounting an outdoor grille or louver section to the building face may cause a space between the outdoor coil
and the louver section. Air splitters, aligned with the
ends of the outdoor coil, must be installed between the
outdoor coil inlet and outlet air streams. Gaps between
the outdoor coil and the louver section may allow condenser air recirculation and affect the operation of the
unit.
The wall case should be level from side to side
and from level to 1/4 bubble tilt to the outdoors.
The condensate disposal system in the unit is
designed to dissipate the condensate water generated during cooling operation in accordance
with ARI standards and actually uses this water
for maximum unit efficiency. A level unit will also
insure proper performance of the Internal
Condensate Removal (ICR) system optional on
heat pump units.
For new construction, early planning with the architect
is necessary. Unit location, electrical connection
locations, and wall openings of proper dimension are
essential to avoid the necessity of rework, fillers,
Installation
PTAC
65
Installation of unit
6RWU0-02A
63. The outside edge of the wall case should extend at
least 1/4" beyond the outside wall.
This is necessary for proper caulking, to prevent sealing
thedrain holes in the rear flange of the wall case, and to
facilitate the installation of an accessory drain, if used.
Preparation of the front grille
Carefully remove shipping tape from the front grille.
The wall case should be level from side to
side and from level to 1/4 bubble tilt to the
outdoors. The condensate disposal system in
the unit is designed to dissipate the condensate water generated during cooling operation
in accordance with ARI standards and actually uses this water for maximum unit efficiency. A level unit will also insure proper performance of the Internal Condensate Removal
(ICR) system optional on heat pump units.
Shipping Tape
Brick, Frame, Stucco and Shingle
Construction
For new construction, the opening for the wall case should
be framed and inserted into the opening during construction. Lintels should be used when the building material is
heavy and is not self supporting (such as brick). The wall
case will fit an opening of six courses of standard brick or
five courses of jumbo brick. Wall framing in this type construction is normally on 16" centers and the wall case will fit
a framed opening spanning three 16" O.C. 2" x 4" stud
spaces.
For existing construction the indoor and outdoor wall will
need to be cut out, allowing for clearances of 1/8" on all
sides of the wall case. Work should begin on the inside wall.
Cut the correct dimensions and mark (using drill holes) the
outside wall from each corner of the inside cutout. Studding
that interferes with the opening must be removed and a suitable frame constructed to secure the wall case and provide
adequate support for case and chassis.
Preparation of the Wall Case for All Types of
Construction
As shipped, the LG wall sleeve is ready for installation.
Do not remove the stiffener from inside the wall case or the
weather closure panel from the outside face of the wall case
until the outdoor grille and chassis are ready to be installed.
Installation of Wall Case in Wall Opening
2. The wall case should be secured to the wall at both
sides.
Use a minimum of two screws or other fastening device
on each side. See Figure 2 page 63. Mark the wall case
on each side 2" from the bottom and 2" from the top at a
point where basic wall structure is located. Drill wall case
and use fasteners appropriate for wall construction. All
holes for fasteners in the side of the wall case must be at
least 2" up from the bottom of the wall case.
Never fasten screws or put other holes in the bottom
of the wall case.
If the wall opening is greater than the case dimensions,
spacers must be used on the sides between the wall
case and the wall support structure to prevent distorting
the wall case.
3. Caulk or gasket the entire opening on the outside
between the wall case and exterior wall surface (4 sides)
to provide total water and air seal.
4. Caulk or gasket room-side opening between wall case
and interior wall surface (4 sides). Opening beneath or
around the wall case can allow outdoor air to leak into the
room resulting in increased operating costs and improper
room temperature control.
Care should be taken in location of electrical supply
entry in relationship to wall sleeve to assure access to
receptacle or junction box once unit is installed.
1. Position the wall case into the wall. The room side edge of
the wall case should be at least flush with the finished wall
for line cord installations and permanent connection installations when no sub-base is used, and should project into
the room at least 2-3/8" when a sub-base is used. If the
minimum exterior dimensions are not met, refer to page
66
PTAC
Installation
6RWU0-02A
Installation
Installation of unit
PTAC
67
68
PTAC
WALL RECEPTACLE
(BY OTHERS)
2" MIN.
CAULK*
POWER SUPPLY
CONDUIT
OUTDOOR
GRILLE
STEEL LINTEL
CAULK*
1/4"
MIN.
WALL CASE
MOUNTING SCREWS
BY INSTALLER
20-7/8" (RAB71)
21"
(RAB77)
RAB71 13-3/4"
RAB77 13-7/8"
*Caulk around perimeter of wall case all four sides
where it joins the building - Interior and Exterior
.
FINISHED FLOOR
OR TOP OF
CARPET
CAULK*
ROOM
CABINET
CAULK*
Cord Set Connected
FINISHED FLOOR
OR TOP OF
CARPET
3" MIN.
5" MAX.
FRAME AND BRICK VENEER INSTALLATION
WALL SECTION – DETAILED SIDE VIEW
3-11/16"
SIDE CHANNEL
WALL CASE
2" MIN.
MOUNTING SCREWS
BY INSTALLER
POWER SUPPLY CONDUIT
(ALTERNATE ENTRY)
CAULK*
SUB-BASE
(RAK204)
1-5/16"
ROOM
CABINET
CAULK*
2-3/8"
LINTEL
Sub-Base Connected
*Caulk around
perimeter of wall
case all four
sides where it
joins the building
- Interior and
Exterior .
OUTDOOR
GRILLE
CAULK*
1/4"
Installation of unit
6RWU0-02A
Installation
6RWU0-02A
Installation of unit
Unit installation
1. Remove the shipping screw from the ventilation door.
(refer to figure on the right)
2. Remove the front gille by pulling it out at the bottom to
release it, then lift it up along the unit top front.
(refer to figure on the right)
3. Slide the unit into the wall sleeve and secure with 6 screws
through the unit flange holes. (refer to figure on the right)
4. Reinstall the front grille by hooking the top over the unit top,
then pushing it in at the bottom. (refer to figure on the right)
Installation
PTAC
69
Installation of unit
6RWU0-02A
ELECTRICAL SAFETY
IMPORTANT
(PLEASE READ CAREFULLY)
PREFERRED METHOD
FOR THE USER'S PERSONAL SAFETY, THIS APPLIANCE MUST BE PROPERLY GROUNDED
The power cord of this appliance is equipped with a threeprong (grounding) plug. Use this with a standard three-slot
(grounding) wall power outlet to minimize the hazard of electric shock. The customer should have the wall receptacle and
circuit checked by a qualified electrician to make sure the
receptacle is properly grounded.
Ensure proper ground
exists before use
DO NOT CUT OR REMOVE THE THIRD (GROUND)
PRONG FROM THE POWER PLUG.
FUSE – Use a time – delay fuse or circuit breaker. Refer to the nameplate for proper power supply requirements.
Use Wall Receptacle
Power Supply
CAUTION
1. Do not use an extension cord with this unit.
2. When the unit is in the OFF position, the power supply to the electrical controls is still energized.
3. Disconnect the power to the unit before servicing
the unit.
4. Remove the power cord from the wall receptacle.
5. Remove or turn off the protective device (fuses or circuit breaker).
Wirings including installation of the receptacle must comply with the
NEC and local codes, local regulations.
Use 15 AMP. time
delay fuse or 15 AMP.
Circuit breaker.
Standard 208/230V, 3-wire
grounding receptacle rated 15A
Use 20 AMP. time
delay fuse or 20 AMP.
Circuit breaker.
Standard 208/230V, 3-wire
grounding receptacle rated 20A
(2500W Heater ơ15Amp
Circuit Breaker)
Use 30 AMP. time
delay fuse or 30 AMP.
Circuit breaker.
Standard 208/230V, 3-wire
grounding receptacle rated 30A
FUSE- Use a time-delay fuse or circuit breaker. Refer to the nameplate
for proper power supply requirements.
Use 20AMP,time delay
fuse or 20AMP
Circuit breaker
Standard 265V grounding
receptacle rated 20A
Standard 265V grounding
receptacle rated 25A
(2000W Heater ơ15Amp
Circuit Breaker)
Use 25AMP,time delay
fuse or 25AMP
Circuit breaker
Installation(for 60Hz)
• Electric installation requirement for personal safety:
• This equipment must be properly connected to ground.
Standard 265V grounding
receptacle rated 30A
Use 30AMP, time delay
fuse or 30AMP
Circuit breaker
• Under no circumstances cut or break the grounder conductor.
• We recommend not to use an extension wire or any adaptor with this product.
• Follow the national or local electric codes.
• If the power supply does not fulfill the specifications previously mentioned, call an authorized electrician.
• The aluminum wired in the houses may bring about some problems, call an authorized electrician.
• This unit requires a separated power supply that works only for this application.
70
PTAC
Installation
Part 4 Accessories
1 Controller accessories .......................................................................72
1.1
1.2
1.3
1.4
Hard Wire kit .....................................................................................................72
Fuse Holder kit .................................................................................................74
Circuit Breaker kit .............................................................................................76
Power Switch....................................................................................................79
2 Mechanical accessories .....................................................................82
2.1 Control Panel Key Lock ...................................................................................82
2.2 Condensate Disposal Pump kit .......................................................................83
2.3 Architectural Grille Aluminum – Single Pack ....................................................87
2.4 Condensate Drain Kit .......................................................................................89
2.5 Leveling legs.....................................................................................................92
2.6 Subbase ...........................................................................................................93
2.7 Wiring Harness kit ............................................................................................96
2.8 Replacement Filter ...........................................................................................97
2.9 Wall Sleeve.......................................................................................................97
2.10 Vent Filter ......................................................................................................98
Accessories
PTAC
71
Controller accessories
6RWU0-02A
1. Controller accessories
1.1 Hard Wire Kit
The Hard Wire kit consists of a Junction box which provides a
protective enclosure for the electrical connections. This junction box is furnished with approximately 2 - 1/2 feet of 1/2 inch
flexible steel conduit and a metal box that secures to the
PTAC at the control panel. The Hard Wire kit connects the
PTAC directly to the building power supply wires and the
junction box is intended to be mounted on the wall or the floor
near the PTAC.
Hardwire Kit
AYHW101
Installation Procedure:
The Installation and servicing of the equipment should be performed by qualified and experienced personnel only.
1) At first, remove the cover plate from the junction box.
Then, mount the junction box on the wall or floor within 28
inches (711mm) from the lower right corner of the wall
sleeve so that the metal box is suitably clamped on the
side of the sleeve as shown on the right below.
2) If a power switch is to be used, make sure the electrical
connections are done and then mount the switch onto the
junction box. During this operation, refer to the Power
Switch Installation instructions.
3) Remove the control panel assembly by removing the two
screws holding the control panel in place and then gently
lift the panel. Disconnect the power cord leads from all
electrical connections including the ground wire.
4) Remove the power cord clamp and the power cord from
the unit.
Wall Sleeve
Ground Wie
with Eyelet
Terminal
Cover plate
Power Leads
with Push on
Connectors
28 Inch es Max
Conduit
Metal Box
with Straight Clamp
Control Panel
Base Pan
Bracket
72
PTAC
Accessories
6RWU0-02A
Controller accessories
5) Now for 208/230 volt units, remove and discard the white lead from the wire assembly. For 265 volt units, remove and
discard the red lead from the wire assembly.
* For 208/230 volt units and 265 volt units refer to notes given on the next page.
6) Remove the retaining ring, which holds the threaded conduit and the metal box together, from the straight conduit clamp.
Insert the three wires into the metal box through one of the two openings in the box. Replace the hole cover grommet into
the unused hole to prevent objects from entering the box.
7) After inserting the wires, replace the retaining ring back on the conduit clamp inside the metal box and tighten the ring
securely so that it holds the conduit firmly.
8) The three wires extending from the metal box to the incoming power opening are inserted in such a way that approximately 20inches (508mm) of the wires protrude through the opening.
9) Attach the metal box to the chassis once again. Then, finally insert the wire tie into the _ inch diameter hole located just
above the incoming power opening. Tie all wires together securely with the wire tie as shown in the figure below.
Right Side of Chassis
Wire Tie
3/16 Inch
Diamenter Hole
Electrical Supply Wires
Back of Control Panel
208 / 230 Volt Units
a) After removing the white lead from the wire assembly, connect the black lead to the line-2 terminal on the control board.
b) Connect the red lead to the common (C) terminal of the capacitor and then connect the ground wire to the partition panel
where the ground wire of the power cord was located earlier. For grounding, use the supplied ground screw (green color).
c) Then connect the red lead wire of the wire assembly at the junction box to the red lead of the field power source and similarly, connect the black lead of the wire assembly at the junction box to the black lead of the field power source. After that
connect the ground wire too from the field power source to the ground wire of the wire assembly at the junction box.
d) Install the junction box cover plate and reinstall the control panel assembly.
265 Volt Units
a) After removing the red lead from the wire assembly, connect the black lead to the center terminal of the fuse holder.
b) Connect the white lead to the common (C) terminal of the capacitor and then connect the ground wire to the partition
panel where the ground wire of the power cord was located earlier. For grounding, use the supplied ground screw (green
color).
c) Then connect the white lead wire of the wire assembly at the junction box to the white lead of the field power source and
similarly, connect the black lead of the wire assembly at the junction box to the black lead of the field power source. After
that connect the ground wire too from the field power source to the ground wire of the wire assembly at the junction box.
d) Install the junction box cover plate and reinstall the control panel assembly.
Accessories
PTAC
73
Controller accessories
6RWU0-02A
1.2 Fuse Holder Kit
The optional fuse holder kit can be directly installed in the chassis or in the optional subbase. Fuse holder kits are available in
208/230 volt ratings.
Time delay fuses of 15, 20, 25 or 30 Amperes should be used in
accordance with maximum over current protection as displayed
on the unit nameplate.
Fuse Holder Kit
AYFH1401
Installation Procedure(without subbase):
The Installation and servicing of the equipment should be performed by qualified and experienced personnel only.
1) Remove the Front Grille from the unit by pulling it at the bottom on both sides and then lifting upwards as shown in the
figure on the right.
2) To gain access inside the control panel, after removing the
knobs and escutcheon, remove the screws holding the panel
in position. Tilt the panel forward, being careful not to pinch
any wires, as shown in the figure on the right.
3) As can be seen from the front, remove both knockouts off the
control panel and insert the two fuse holders from the front.
The fuse holders should be so connected that the quick connect tabs are facing towards the center of the unit. Attach the
fuse holders using screws and nuts provided.
Mode Switch
Thermostat
Remove two screws
to gain access inside
Control Panel
Fuse Holder
Knockouts
under panel
74
PTAC
Accessories
6RWU0-02A
Controller accessories
4) Remove both the power cord leads – one from the capacitor and
the other from the electronic board. And then install one power
cord lead to the center terminal of one fuse holder and the other
power cord lead onto the center terminal of the second fuse
holder as shown in the figure on the right.
FUSEHOLDERS
WH
GN
BK
5) Connect the BK-10 wire from the side terminal of one fuse holder to the Line terminal on the electronic board.
6) Connect the RD-10 wire from the side terminal of the other fuse
holder to the Common (C) terminal on the capacitor.
7) Place the control panel back to itʼs original position, taking care
not to pinch any wires. Align the panel and screw it firmly to
position with the original screws. Place the escutcheon and slide
the control knobs back to itʼs earlier position.
Terminal Blocks Behind
the Control Panel
Transformer
Status Light
Control Board
Fig: Fuse Holder connections.
Installation Procedure(using a subbase):
The Installation and servicing of the equipment should be per-
Fig: Front of subbase.
Fig: Back of subbase.
formed by qualified and experienced personnel only.
Fuse Holder
Knockouts
1) Remove both knockouts from the fuse holder location on the
subbase as shown on the right.
2) Install the fuse holders using the screws provided. The side connector tab on the fuse holders should be towards the left.
Leveling
Leg
Accessories
PTAC
Power Switch
Knockouts
75
Controller accessories
6RWU0-02A
3) Connect the stripped BK-9 wire to the center of the quickconnect tab of the fuse holders. Wire nut the other end of this
wire to the black field connect wire (TB1).
4) Connect the other stripped BK-9 wire to the quick-connect
tab on the side of the same fuse holder. Wire nut the other
end to the black subbase wire to the receptacle.
5) Connect the stripped RD-9 wire to the center quick-connect
tab of the second fuse holder. Wire nut the other end to the
red field connection wire (TB3) as shown on the figure on
top right.
Electrical
Receptacle
Fuseholder
BK-9
Fuseholder
RD-9
Green
Field Connection
Wiring
Black
Red
6) Connect the other striped RD-9 wire to the quick connect tab
on the side of the second fuse holder. Wire nut the other end
to the red subbase wire which leads to the receptacle.
7) Finally, Insert delay fuses into the fuse holders. Size all fuses
by the Maximum over current Protection as displayed on the
nameplate of the unit. Please refer to the serial plate of the
unit too.
76
PTAC
Accessories
6RWU0-02A
Controller accessories
1.3 Circuit Breaker kit
The Circuit breaker kit provides POWER ON/OFF and overcurrent protection function to the unit. The circuit breaker kit
contains the following:-
Cover
(Not included
in this kit)
Bracket
(Not included
in this kit)
• Circuit breaker
• Replacement access cover for the high voltage section
of the subbase.
• Mounting bracket
Din rail
• Mounting Clips and
• Required Hardware.
Mounting
clips
Circuit breaker
Fig: Circuit Breaker kit.
Mounting Clips
Din rail
Bracket(not included in the kit)
Circuit Breaker kits should always be selected according to the unit amperage.
Accessories
Fig: Circuit Breaker
PTAC
77
Controller accessories
6RWU0-02A
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
1) At first remove the access cover from the subbase.
2) Position and fasten the din rail on top of the mounting
bracket as indicated in the figure on the right. Secure one
of the two small mounting clips to the din rail. Do not fully
tighten the mounting screw during this time.
3) Position the assembly into the subbase as shown in the
figure on the right. Using the two screws provided, secure
the assembly to the subbase back wall in the subbase
high voltage section.
4) Position the circuit breaker on the din rail so that the locking tabs on the mounting clip holds the circuit breaker on
the mounting bracket.
5) Install the second mounting clip onto the din rail, locking
the circuit breaker on the mounting bracket as shown in
the figure on the right.
Then, after making sure that the circuit breaker is in the
right position tighten both the mounting screws.
(Install the cover in place and adjust the position of the
breaker to make sure that the mounting holes between
the subbase and the cover match)
78
PTAC
Accessories
6RWU0-02A
Controller accessories
1.4 Power Switch
For both 208/230 and 265Volt power Switch
Assemblies
This optional kit can be installed in a full length subbase or
in the junction box of the Hard Wire Junction Box kit. This
switch has the Power On/Off function.
With each switch, a replacement junction box cover plate
has also been provided.
Note:
Unit terminals are not designed to accept conductors other
than copper. Use of other conductors may result in damage
of equipment.
All wiring must comply with applicable local and national
codes.
Fig: Power Switch
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
For 208/230 Volt Installation
1) At First, remove and discard the white lead of the Hard
wire assembly.
2) Connect the Black lead of the Hard wire assembly to one
terminal of the disconnect switch as shown in the figure
on the right.
3) Connect the red lead of the Hard wire assembly to the
terminal just opposite to the one, to which the black lead
has been connected.
4) Remove the knockout from the desired power entry point
of the junction box and route the field supply power wires
into the junction box.
5) Connect the red and black leads of the field power supply
to the two unused terminals on the power switch.
6) Connect the ground wire of the field power supply to the
bare ground wire assembly.
7) Mount the switch on the tabs in the junction box and
install the switch cover plate provided with the power
switch.
Accessories
Fig: 208/230V Power Switch
PTAC
79
Controller accessories
6RWU0-02A
For 265 Volt Installation
1) At First, remove and discard the red lead of the Hard wire
assembly.
2) Connect the Black lead of the Hard wire assembly to one
terminal of the disconnect switch as shown in the figure
on the right.
3) Remove the knockout from the desired power entry point
of the junction box and route the field supply power wires
into the junction box.
4) Connect the black lead of the power supply to the remaining disconnect switch terminals.
5) Connect the ground wire of the field power supply to the
bare ground wire assembly.
Fig: 265V Power Switch
6) Connect the white lead of the wire assembly to the
Neutral lead of the power supply.
7) Mount the switch on the tabs in the junction box and
install the switch cover plate provided with the power
switch as shown in the figure on the right.
80
PTAC
Accessories
6RWU0-02A
Controller accessories
Power Switch installation for subbase
For 208/230 Volt
1) Remove the left and the right subbase cover panels by
removing the screws. Please retain the screws.
2) Remove the rectangular knockout located near the center
of the recessed area on the left cover panel.
3) Install the switch using the two bolts and the two nuts provided so that the "On" position of the switch is on the
right. Install the ground lead between the switch mounting
tab and the mounting plate.
4) Route the RED wire, from the receptacle, through the barrier in the subbase using the hole provided. (refer to figure
on the right)
5) Insert the RED wire from the receptacle into the upper
right hole in the rear of the switch and tighten the screw.
Insert the RED power wire(field wiring) into the upper left
hole in the switch and tighten the screw.
6) Route the black wire, from the receptacle, through the
barrier in the subbase using the hole provided.
7) Insert the black wire, from the receptacle, into the lower
right hole in the rear of the switch and tighten the screw.
8) Attach the ground field wire by connecting the green wire
on the disconnect switch to the ground terminal on the
back wall of the subbase high voltage section.
9) And finally replace the cover panels (with the switch
installed) to the subbase using the screws removed in
step 1.
For 265 Volt
1) Remove the left and the right subbase cover panels by
removing the screws. Please retain the screws.
2) Insert the black wire from the receptacle into the lower
right hole in the rear of the switch and tighten the screw.
Insert the Black power wire(field wiring) into the lower left
hole in the switch and tighten the screw.
3) Connect the white wire, from the receptacle, to the white
power wire(field wiring) by means of the wire nut
4) Attach the ground field wire by connecting the green wire
on the disconnect switch to the ground terminal screw on
the back wall of the subbase high voltage section.
5) And finally replace the cover panels (with the switch
installed) to the subbase using the screws removed in
step 1.
Accessories
PTAC
81
Mechanical accessories
6RWU0-02A
2 Mechanical Accessories
2.1 Control Panel Key Lock
Door
Hinge Pins
(Each Side)
Front
Control Panel Key Lock
AYCP101
Brackets
(Each Side)
The Control Panel Key Lock Kit prevents tampering
of the controls which is used to set temperatures and
other Heating and Cooling functions.
Installation Procedure:
The Installation and servicing of the equipment should be performed by qualified and experienced personnel only.
1) Remove the Front Grille from the unit by pulling at the bottom on both sides and then lifting upwards as shown in the
figure on the right.
2) Remove the existing cover assembly by lifting the cover
halfway, using both hands and then slightly pull the cover
hinge pins so that these pins slide out of the mating holes.
3) After removing the existing cover assembly, install the cover
assembly with the key lock by applying slight pressure with
both hands so that the cover hinge pins align properly onto
the bracket.
82
PTAC
Accessories
6RWU0-02A
Mechanical accessories
2.2 Condensate disposal pump kit.
Spray tube
The internal condensate pump serves as a means for disposing the condensate generated during the Heat pump
operation by transferring the condensate into the indoor
coil. The warm coil along with the warm air from the room
helps in evaporating
the condensate while adding humidity to the room.
But the addition of this kit decreases the effective heating
capacity of the unit and this kit is not intended for use in
seacoast or corrosive environments.
Tube # 1
Tube # 2
Screws
Pump Assembly
Rubber Elbows
Note:
Under extreme high humidity conditions, the internal condensate pump may not be able to dispose off all the condensate produced, and then the condensate may drip from
the outside of the wall sleeve. If this condensation is unacceptable, then a drainage system (including factory
approved drain kit for the wall sleeve) should be installed.
Condensate Disposal Kit
AYCD2101
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
1) Unplug the PTAC unit from the power supply and then
remove the unit from the wall sleeve. Place the chassis
where the front and the back of the chassis can be easily
accessed.
2) Remove the Front Grille from the unit by pulling it at the
bottom on both sides and then lifting upwards as shown
in the figure on the right.
Accessories
PTAC
83
Mechanical accessories
6RWU0-02A
3) Remove the Top cover assembly and the net steel shown
in the figure on the right.
Net steel
4) Remove the wire junction box cover by removing the four
screws and lifting it up as shown in the figure on the right.
5) Remove and set aside the air discharge screen and then
remove the two screws holding the control board cover as
shown in the figure below.
6) Unplug the electric heater connector located inside the
wire junction box and remove the screw that attaches the
electric heater wire to the side of the indoor fan housing
as well as remove the four screws which fasten the top
cover assembly.
Top Cover
7) Position the water spraying plastic tube into the electric
heater cover. Then, after installing the Electric Heater
cover, install one of the three rubber elbows at the inlet of
the spraying tube and through the grommet.
8) Place the Top cover assembly back into the unit.
Electric Heater Cover
84
PTAC
Accessories
6RWU0-02A
Mechanical accessories
9) Install Tube #1 and Tube # 2 of the pump assembly using
Rubber elbows as show in the figure on the right.
Tube #2
Tube #1
10) Position the pump assembly onto the base pan into the
slots provided adjacent to the compressor, by means of
the three screws as shown below.
Tube # 1
Fig:Position of the condensate pump adjacent to compressor
Tube # 2
11) Insert Tube # 2 of the pump assembly through the plastic grommet of the sheet metal partition between the
indoor and the outdoor side of the PTAC. And then connect the end of the Tube # 2 to the plastic elbow coming
out of the inlet of the spraying tube as shown on the
right.
Fig:Connection between Tube # 2 and the spray tube
Accessories
PTAC
85
Mechanical accessories
6RWU0-02A
12) Connect the condensate pump to the ICR relay of the
terminal of the board as shown in the figure below.
Please make sure that the pump wire is fastened on the
back side of the control barrier as shown in the figure on
the right.
Note:
The Tube ends should be inserted into rubber elbows by at
least 1/2 inch.
ICR Motor port
86
PTAC
Accessories
6RWU0-02A
Mechanical accessories
2.3 Architecture Grille Aluminum – Single Pack.
Outdoor Grilles are attached to the Wall Sleeve and exposed to the exterior Wall. These Grilles comes in industry standard
size of 42" x 16". These Grilles are of two types :
(a) Stamped Aluminum Grille
Stamped Aluminum Grille
AYRGALA01
and (b) Architecture Grille.
Aluminum
AYAGALA01A
Soft Dove
AYAGALC01A
Dark Bronze
AYAGALB01A
Installation Procedure:
The Installation and servicing of the equipment should be performed by qualified and experienced personnel only.
(a) Stamped Aluminum Grille.
1) Prepare the wall sleeve for installation of the Grille by removing the cardboard stiffener and rear enclosure panel from the
sleeve. These items may be removed from the inside of the room.
Note: The Sleeve stiffener must be taken out before the rear sleeve enclosure panel can be removed from the sleeve.
Accessories
PTAC
87
Mechanical accessories
6RWU0-02A
2) Prepare the stamped Aluminum Grille for installation on the sleeve by inserting the six plastic grommets into the square
holes located near the outer edges of all the four sides of the Grille. Now with the Grille positioned so that the flanges of
all the four sides are in the up position (at 90 degrees), insert the grommets in the opposite direction so that their square
end protrudes through the grille through the flanges. The Grille is installed in such a way that it could be removed through
the rear sleeve opening.
3) Install the stamped Aluminum Grille by aligning the guide
pins located in the lower right and left hand corners of the
Grille with the corresponding holes in the rear of the wall
sleeve.
4) Secure the Grille by threading each of the screws into the
plastic grommets.
5) Remove the wire handle from the center of the grille prior
to installing the chassis into the sleeve.
(b) Architecture Grille.
1) Remove the cardboard stiffener and rear enclosure panel
from the sleeve. These items may be removed from the
inside of the room.
2) The Grille is installed in such a way that it could be
removed through the rear end of the sleeve.
3) Install the Grille by aligning the four screws supplied to
their corresponding holes in the architecture grille.
4) Secure the Grille to the sleeve by tightening the four
screws to their corresponding holes in the Grille.
5) Remove the wire handle from the center of the grille prior
to installing the chassis into the sleeve.
88
PTAC
Accessories
6RWU0-02A
Mechanical accessories
2.4 Condensate Drain Kit.
During the Heat Pump operation, condensate water inside
the unit drains out into the sleeve from the chassis. Such an
instance may also happen at times of high humidity during
the cooling operation. And when normal drainage from the
wall sleeve is not possible or undesirable then, this condensate drain kit can be used.
There are two types of condensate drain kit :(a) Outdoor drain kit and
(b) Indoor drain kit.
Condensa te Drain Kit
AYDR101
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
(a) Outdoor drain kit
Before installing the outdoor Grille, it must be determined if
the optional outdoor wall sleeve drain kit is to be installed.
The drain kit will allow the condensate from the outdoor and
indoor coils to be routed to a suitable area and the kit can
be installed so that the condensate can be drained from the
right or left hand side of the wall sleeve.
1) At first remove the rear enclosure panel and the sleeve
stiffener. These items may be removed from the inside of
the building.
2) The drain fitting can be installed either on the right or on
the left hand side of the sleeve. (Illustration is only for the
right hand installation) Insert the drain fitting in the opening of gasket A and hole of plate B. Secure this assembly
to the rear of the sleeve with two sheet metal screws into
holes G in the sleeve as shown in the figure on the right.
PLATE "B"
G
DRAIN FITTING
Accessories
PTAC
89
Mechanical accessories
6RWU0-02A
3) Locate the other gasket A on the back of the bank off plate and
secure the assembly to the left rear of the wall sleeve with sheet
metal screws provided.(refer to figure on the right)
Now if the unit is to be installed right away install the condenser grille
to the wall sleeve with the hardware provided. See the condenser
grille installation instructions.
BLANK-OFF PLATE
If the unit is not installed right away then replace the rear enclosure
panel in the wall sleeve.This will help protect the inside of the buildSHEET METAL SCREWS
ing from weather damage.
And if a subbase is used, be sure to remove the right hand subbase cover before installation of the chassis into the sleeve.
Then finally, slide the chassis into the wall sleeve until it comes in contact with the flanges.
(b) Indoor drain kit.
The internal drain kit is installed when the condensate is to be drained into the drain system inside the building. This drain
kit is installed on the bottom of the wall sleeve. The components of this kit is shown in the figure below :-
See Detail A
Sleeve overflow port
Do not close up this port
Gasket (2)
Blank-off Plate (2)
(4) Mounting Screws
Gasket
Wall Sleeve Bottom
Cover
Plate
1/2" Outdoor Drain Fitting
Detail A
MTG. Screws (2)
90
PTAC
Accessories
6RWU0-02A
Mechanical accessories
1) The components D, E and the drain fitting of the kit are mounted on the bottom of the wall sleeve prior to the installation of
the sleeve. When a subbase in not used, a suitable area on
the bottom of the sleeve is selected which is inside the room.
And when a subbase is installed, the drain should be installed
at a minimum of 3 – 1/2 inch from the front flange of the wall
sleeve. A minimum clearance should be provided for the subbase as shown in the figure on the right.
2) Cut out the template in the lower right hand corner of the
sleeve to locate the field drilled holes. See detail A on the last
page on how the components have to be installed after the
holes are drilled in the bottom of the wall sleeve. If the drain
fitting is not connected to an indoor drainage system immediately after the wall sleeve is installed, then it must be plugged
with a cork to prevent indoor water spilling in case of rain.
An indoor tube or hose must be installed on the drain fitting and inter connected to the drain system inside the building.
Install the two blank off plates C and gaskets A on the outdoor portion(flange) of the wall sleeve as shown in the figure on
the last page. These components may be installed after the wall sleeve is secured in the wall opening just prior to the installation of the condenser grille and chassis.
Accessories
PTAC
91
Mechanical accessories
6RWU0-02A
2.5 Leveling legs
Leveling legs are designed to provide extra front support
and leveling of the wall sleeve. Two leg assemblies are
needed by each unit and each leg assembly requires two
screws for attaching them to the wall .
These leveling legs must be installed before the installation of the chassis but after the wall sleeve is in position.
Holes must be drilled on each side of the wall sleeve
below the duct package holes, as shown on the figure on
the right, for attaching it to the wall sleeve.
Leveling Legs
AYLL101
Installation Procedure:
The Installation and servicing of the equipment should
be performed by qualified and experienced personnel
only.
1) At first, drill two 1/8 – inch holes in each side of the
wall sleeve as shown in the figure on the right(using
the leveling leg assembly as a template). The holes
should be drilled near the front of the sleeve for the
leveling legs to provide better support to the wall
sleeve and the weight of the unit.
2) Adjust the leveling legs to the required height and
then install them on either side of the wall sleeve by
means of screws. Caulk or seal the screws to prevent
any water leaks from these screw points.
3) Adjust the level of the sleeve horizontally from side to
side. Provide a slight slope (one quarter bubble in the
sight glass) towards outside (other side of the room).
Check the level again after the unit has been installed
and adjust the legs further if necessary.
1/8" Diameter holes
(four required per unit field-drilled)
Leveler Bracket
1/2"
Speed Grip Nut
1"
Adjuster Screw
1/4"
92
PTAC
Accessories
6RWU0-02A
Mechanical accessories
2.6 Subbase
1
The Subbase provides an enclosure for an electrical
receptacle, power switch and a circuit breaker. Electrical
connections to the power supply from the unit are made
inside the subbase. In addition, the subbase provides
structural support to the Wall Sleeve and to the weight of
the PTAC unit .
The Subbase kit consists of two leveling legs for sleeve
support and an accurate unit for leveling during installation. Also, the subbase is pre-wired and is grounded by
means of a grounding screw.
2
3
4
2
Part No.: AYSB1101(230/208V 20A)
AYSB2101(230/208V 20A)
1
2
3
4
1 – Subbase box Assembly.
2 – Skirting
3 – Right Front Cover.
4 – Front Cord Panel.
2
Note: When using a subbase, the wall sleeve must be installed at a minimum height of 3 – 1/4 inches (83mm) above a finished
floor and at a minimum distance of 2 – 3/4 inches(70mm) from a finished wall.
Accessories
PTAC
93
Mechanical accessories
6RWU0-02A
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
Part/Location Identification
1) Remove parts B and C (refer to the figure on the right)
from the subbase and join together using two metal
screws. The resulting assembly now becomes the right
front cover (part F) as shown in the figure below.
A
Left Front Cover
B
Right Front Cover
C
Front Cord Panel
D
Wall Sleeve Hole Location
E
Skirting Hole Location
F
Right Cover Assembly
Wall Sleeve
D
E
Fig: Right Front Cover assembly
Cover
Wiring
Access
2) Position the subbase under the front of the wall sleeve.
B
F
Subbase
Box Assy
3) Align the back edge of the flange on cover A to the
front of the wall sleeve flange(refer to the figure on the
right).
2-13/16"
(71 mm)
D
A
"
/16 )
-13 m
11 0 m
(30
E
C
Low Voltage
Compartment
Fig: Subbase and itʼs components
4) Drill four 1/8 inch holes in wall sleeve to line-up with
holes in subbase (location D) and then mount the subbase onto the wall sleeve with four sheet metal screws
provided with the kit (refer to the figure on top right).
13 3/4"
Wall Sleeve
(Outdoor Side)
16" 16" 2 3/4"
2 3/4"
5) Remove the left front cover from the subbase (refer to
part A on the figure on top right).
Wall Sleeve
Inside Edge
Back of
Flange "A"
4" (101 mm)
2 5/8"
2" (50 mm)
Left End View
Concentric
Knockouts In Bottom
Top View
1-3/8" (35 mm)
Receptacle Provided
Inside subbase
3-1/16" Accessory
13-7/8" (352 mm) (78 mm)
20-5/16" (515.5 mm)
Concentric
Knockouts In Rear
Front View
2-5/8" (67 mm)
Ground
Screw Location
2" (50 mm) Max.
Adjustment
Fig: Dimensions of subbase
94
PTAC
Accessories
6RWU0-02A
Mechanical accessories
6) Position skirting on each side of the wall sleeve to prevent the entry of foreign materials. Trim skirting to desired length
and attach the skirting with four metal screws provided with the kit (refer location E of the Fig: Subbase and itʼs components on the previous page).
7) Wire the subbase for appropriate voltage (refer to the figure on the right).
Field Wiring
Line Voltage
Note:
The proper subbase must be ordered to obtain
the correct electrical receptacle.
NEMA 6-20R
Receptacle
NEMA 7-20R
Receptacle
NEMA 6-30R
Receptacle
NEMA 7-30R
Receptacle
Refer to the table at the end of this page.
230/208 VAC Field Schematic
Field Wiring
Line Voltage
265 VAC Field Schematic
8) After the wiring is done, mount the two covers A and F to the subbase with the provided screws (refer to the Fig: Subbase
and itʼs components on the previous page).
9) When installing optional accessories to the subbase, refer to each instruction for that accessory
NEMA Plug Configurations
Voltage
Unit Plug
Subbase Receptacle
265
Accessories
PTAC
95
Mechanical accessories
6RWU0-02A
2.7 Wiring Harness kit
The PTAC Wire Harness kit provides connection from the
6-pin terminal strip on the PTAC control board to the following broad features :
• Energy Management*
• Front Desk Control
• Remote Fan (relay must be manufacturer approved and
have a AC low voltage coil)
• Remote Thermostat (confirm with manufacturer before
using)
• If other than a dry switch is used in connecting these features, consult the manufacturer before proceeding.
The PTAC Wire Harness kit contains the following (refer to
figure in right):1) 6-pin connector having the following options –
• FD1 and FD2 – Front Desk Control.
• MS1,MS2,DR1 and DR2 – Energy
Management System (connections available for occupancy sensor and door switch).
Fig: Wiring Harness connected to PCB
2) 6 wire nuts.
3) 6 wires.
Wire Nuts (x13)
Wires (x13)
FD2
FD1
MS1
MS2
DR1
DR2
Fig: Wiring Harness components
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
Table1
1) Disconnect power and remove the front panel per unit
installation instruction.
2) Using Table 1 as guide, choose the feature desired and
insert the proper jumper wire into the appropriate slot on
the housing.
96
PTAC
Feature
Pins Used
Motion Sensor
MS1, MS2
Door Switch
DR1, DR2
Front Desk Control
FD1, FD2
Accessories
6RWU0-02A
Mechanical accessories
3) Install the appropriate male-connector header onto the matching on-board female connector.
4) Connect the kit wiring to the field wiring using the wire nuts
(included). Route the kit wiring as shown in the figure below.
Do not run the wires through basepan or wall sleeve.
2.8 Replacement Filter ( 10 Pack )
The unit is provided with two easy-to-use replaceable mesh
filters which can be cleaned periodically form time to time.
Replacement Filter 10-Pack
AYFT110
2.9 Wall Sleeve
These Wall Sleeve comes in industry standard size of
42" x 16"
These Wall Sleeves are fitted firmly onto the wall. The Air
Conditioner unit is slid onto it and held firmly to position by
this Wall Sleeve which acts as its support. Installation of a
wall sleeve allows flexibility to the PTAC unit.
Installation Procedure:
42" Wall Sleeve
AYSVB01A
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
1) For installing the Wall Sleeve, a wall opening 42 x 16 –
1/4 x 13 – 3/4 inch required.
For Details please refer to the Design and Installation part for
installation of the Wall Sleeve.
Accessories
PTAC
97
Mechanical accessories
6RWU0-02A
2.10 Vent Filter
Figure A – Vent (Left side of unit)
The Vent filter is used to filter the air flowing inside the
room when Air Ventilation is performed by means of the
ventilation lever.
Installation Procedure:
The Installation and servicing of the equipment should be
performed by qualified and experienced personnel only.
Before cleaning the vent filter, disconnect power to the unit
by unplugging the power cord at the wall outlet or subbase,
or disconnect power at the fuse box or circuit breaker. If
unit is operated with vent door closed, the vent filter does
not need to be cleaned.
Figure B – Vent Filter Removal
1. Remove the cabinet front as described in Front
Removal.
2. Remove the six screws securing the chassis to the wall
sleeve with a Phillips-Head screwdriver.
3. Slide the chassis out of the wall sleeve far enough so
that the vent filter is accessible as shown in Figure A.
4. Remove the vent filter by unscrewing the two screws at
the top of the filter and gently pulling the filter away from
the partition panel. Refer to Figure B.
5. Clean and replace the filter by reattaching the hook to
the bottom of the vent door and replacing the two
screws, slide the chassis back into the wall sleeve,
secure it in place with six screws and reinstall the front
cabinet.
98
PTAC
Accessories
P/No.: 3828A20801T
Air Conditioner
20 Yeouido-dong, Yeongdeungpo-gu,
Yeouido P.O.Box 335 Seoul,
150-721, Korea.
http://www.lgeaircon.com
All rights reserved
Printed in Korea April/2011
The specifications, designs, and
information in this brochure are subject to
change without notice.
The air conditioners manufactured by LG have received ISO9001 certificate for
quality assurance and ISO14001 certificate for environmental management system.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement