Changing from broadcast to cable TV on the Insignia DVD/VCR

Changing from broadcast to cable TV on the Insignia DVD/VCR
Changing from broadcast to cable TV on the Insignia DVD/VCR combo.
If non-school programming is coming through on the closed circuit channels, this procedure will
probably fix it.
This usually happens if the power has been off to the unit for any length of time.
These instructions are similar for other models.
Your DVD/VCR unit must be in VCR mode.
Short version- find the tuning set up and change from broadcast/antenna/TV to cable/CATV.
Longer version (with pictures!)
Turn on your DVD/VCR unit and your
projector or TV.
Press the Setup/Menu button.
Press the down arrow 2 times so
that “Tuning” is highlighted.
Press “OK” (enter).
Press the down arrow 1 time so that “TV” is highlighted.
Press the right arrow 1 time so that “TV” becomes “CATV”
Press the “Setup/Menu” button again.
You should be back to regular viewing.
Unless something is currently being
broadcast on the closed circuit channels, you
should have a blue screen when tuned to
those channels.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement