Linear GD00Z-1 Garage door opener Installation instructions

Below you will find brief information for Garage door opener GD00Z-1. The Linear GD00Z-1 is a garage door opener remote command controller with a built-in Z-Wave interoperable two-way RF mesh networking technology designed for use with Lowe’s Iris hub, allowing you to remotely control your garage door using the Iris web interface or Iris mobile applications. The GD00Z-1 Controller connects to the garage door opener’s pushbutton wall console terminals and communicates with the Iris hub using Z-Wave radio signals. A wireless tilt sensor mounts on the garage door and reports the door’s position to the Controller. When the Controller receives a command from the Iris hub, it will open or close the garage door.

PDF Download
Document
Linear GD00Z-1 Installation Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Z-Wave interoperable two-way RF mesh networking technology
  • Remotely controlled via Iris web interface or mobile applications
  • Wireless tilt sensor monitors garage door position
  • Warning indicator flashes and beeper sounds before door movement
  • Controller powered by plug-in power supply
  • Tilt sensor powered by 2032 lithium battery
  • Adjustable controller mounting bracket
  • Easy pairing with Iris hub
  • Troubleshooting guide for common issues

Frequently asked questions

To pair the controller with the Iris hub, follow the on-screen instructions on the Iris website. Press the link button on the controller when instructed.

If the door doesn't fully open or close, the controller will allow one more attempt. If the second attempt fails, the controller will go into lock-out mode and blink the status indicator. You'll need to activate the door from the pushbutton wall console to clear the lock-out mode.

First, make sure the power supply is plugged in securely to a live outlet and that the power cord is plugged in securely to the controller. If the issue persists, check that the connection wires are properly connected to the garage door opener terminals.
ALP:
Preparing document for printing…
0%