FCC Information
FCC Information
Information
EN FCC
This device complies with Part 15 of the FCC
Rules. Operation is subject to the following two
conditions: (1) This device may not cause
harmful interference, and (2) this device must
accept any interference received, including
interference that may cause undesired
operation.
In accordance with FCC requirements, changes
or modifications not expressly approved by
Thomson Inc. could void the user’s authority to
operate this product.
This device generates and uses radio frequency
(RF) energy, and if not installed and used
properly, this equipment may cause
interference to radio and television reception.
If this equipment does cause interference to
radio or television reception (which you can
determine by unplugging the unit), try to
correct the interference by one or more of the
following measures:
• Re-orient the receiving antenna (that is, the
antenna for the radio or television that is
“receiving” the interference).
• Move the unit away from the equipment that
is receiving interference.
• Plug the unit into a different wall outlet so
that the unit and the equipment receiving
interference are on different branch circuits.
If these measures do not eliminate the
interference, please consult your dealer or an
experienced radio/television technician for
additional suggestions. Also, the Federal
Communications Commission has prepared a
helpful booklet, “How To Identify and Resolve
Radio TV Interference Problems.” This booklet is
available from the U.S. Government Printing
Office, Washington, DC 20402. Please specify
stock number 004-000-00345-4 when ordering
copies.
Untitled-2
1
Technical Specification
Product: Clock Radio
Brand: RCA
Model: RP3740
Electrical Consumption
Power Supply: 120V~60Hz
Power Consumption: 15 Watts
IMPORTER
Comercializadora Thomson de México, S.A. de C.V.
Miguel de Cervantes Saavedra 57
Col. Ampliación Granada
C.P. 11529 Mexico D.F.
Telefono: (55)25 81 53 20
RFC: CTM-980723-KS5
For Your Records
In the event that service should be required,
you may need both the model number and the
serial number. In the space below, record the
date and place of purchase:
Date of Purchase:
Place of Purchase:
Service Information
This product should be serviced only by those
specially trained in appropriate servicing
techniques. For instructions on how to obtain
service, refer to the warranty included in this
Guide.
4/1/03, 3:48 PM
Safety Information
• Do not use your set
immediately after transport
from a cold place to a warm
place: there may be
condensation problems.
• This set uses a laser beam. To prevent
any accident due to this type of beam,
the set should only be opened by
properly trained personnel.
• Make sure that you keep your set
away from water and high
temperatures.
• To prevent personal injury, do not
reverse any battery and do not
mix battery types.
Ecology
EN
Help protect the environment we recommend that you
dispose of used batteries by
putting them into specially
designed receptacles.
Maintenance
Clean the unit with a soft
cloth, or a damp chamois
leather. Never use solvents.
CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN
THE LIGHTNING
FLASH AND ARROWHEAD WITHIN THE
TRIANGLE IS A
WA R N I N G S I G N
ALERTING YOU OF
"DANGEROUS
VOLTAGE" INSIDE
THE PRODUCT.
CAUTION: TO REDUCE THE
RISK OF ELECTRIC SHOCK,
D O N OT R E M OV E C OV E R
( O R BAC K ) . N O U S E R S E RV I C E A B L E PA RT S I N S I D E . R E F E R S E RV I C I N G
T O Q UA L I F I E D S E RV I C E
PERSONNEL.
THE EXCLAMATION
POINT WITHIN THE
TRIANGLE IS A
WARNING
SIGN
ALERTING YOU OF
I M P O R TA N T
INSTRUCTIONS
A C C O M PA N Y I N G
T H E P R O D U C T.
SEE MARKING ON BOTTOM / BACK OF PRODUCT
WARNING: TO PREVENT FIRE OR ELECTRICAL
SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT
TO RAIN OR MOISTURE.
Untitled-2
2
4/1/03, 3:48 PM
Table of Content
EN
FCC information / Safety Information
CD Player ........................................ 10
Before Your Begin ............................ 2
Play and Pause CD ................................. 10
Stop ......................................................... 10
Skip/Search Tracks .................................. 10
Playback Options .................................... 10
1. Before Plug-In ............................... 2
Automatic Time Set ............................ 2
Setting Time Zone ............................... 2
U.S. Time Zone (Figure 1) ................... 3
Canadian Time Zone (Figure 2) ......... 3
2. Plugging In for Power .................. 4
For Your Safety ................................... 4
3. Daylight Saving Time .................. 4
General Controls .............................. 5
Front View ................................................ 5
Top View ................................................... 5
Side Views ................................................. 6
Display .............................................. 7
Setting the Clock ............................. 8
Weekday Setting ...................................... 8
Setting Clock ............................................. 8
Operating the Radio ........................ 9
Built-In AFC ............................................... 9
Antennas ................................................... 9
Turning on/off the Radio ........................ 9
Selecting Bands ........................................ 9
Tuning to Stations .................................... 9
Radio Frequency Memory ..................... 10
Wake Settings ................................ 11
Setting Wake Time ................................. 11
Wake by Selected Source ...................... 11
Wake to Tone ......................................... 11
Wake to Radio ........................................ 11
Wake to CD ............................................ 12
Cancel Wake Setting .............................. 12
Turning off Alarm .................................. 12
Operating the Clock ....................... 13
Sleep Mode ............................................. 13
Nap Mode ............................................... 13
Snooze Alarm Operation ....................... 14
Weekend Cancel ..................................... 14
Seconds Time Display ............................. 14
Display Brightness .................................. 14
Installing Back-Up Batteries .......... 15
Battery Back-Up ................................ 15
Installing batteries ............................ 15
Power Failure Indicator .................... 15
U.S. Warranty .................................. 16
Canadian Warranty ........................ 18
1
Untitled-2
3
4/1/03, 3:48 PM
Before You Begin
Setting Time Zone
1. Before Plug-In
EN
You may slide the time zone selector at
the bottom of the clock to Pacific,
Mountain, Central or Eastern.
PACIFIC
MOUNTAIN
PACIFIC
MOUNTAIN
EASTERN
CENTRAL
UM3/AA/LR6
You do not have to set the clock time
as a built-in automatic time set system
is equipped in this clock powered by 3V
(2 x “AA” batteries (included)). All you
have to do is to plug this clock for
power and current time will be shown
automatically.
EASTERN
CENTRAL
UM3/AA/LR6
Automatic Time Set
Before plugging in for power, follow
the steps below to select time zone.
Refer to Figure 1 for U.S. Time Zone
details.
Refer to Figure 2 for Canadian Time
Zone details.
2
Untitled-2
4
4/1/03, 3:48 PM
Before Your Begin
U.S. Time Zone (Figure 1)
EN
Canadian Time Zone (Figure 2)
3
Untitled-2
5
4/1/03, 3:48 PM
Before You Begin
2. Plugging In For Power
3. Daylight Saving Time
AC OUTLET POWER SUPPLY:
120V~60Hz
Press and hold DAYLIGHT SAVING
button at the side of the unit to turn on/
off daylight saving time in areas
observing/ not observing such time
change. The daylight saving time icon
will be displayed when the feature is
activated.
e
The AC power plug is
polarized (one blade is
wider than the other)
and only fits into AC
power outlets one way.
If the plug will not go into the
outlet completely, turn the plug over
and try to insert it the other way. If it
still does not fit, contact a qualified
electrician to change the outlet, or use
a different one. Do not attempt to
bypass this safety feature.
Note
Note:
Power is fed to the unit even when it
is not functioning. To cut the power
supply off, the power cable must be
unplugged.
NAP
WEEKEND
CANCEL
e e
For Your Safety
EN
DAYLIGHT
SAVING
WARNING: Please avoid playing with
the DAYLIGHT SAVING button and
TIME ZONE switch after entering
the Clock/Wake set mode.
4
Untitled-2
6
4/1/03, 3:48 PM
General Controls
EN Front View
Top View
OFF
RADIO ON
BAND
MEMO
RECALL
SLEEP
MEMO
SET
WAKE
CANCEL
REW
REV
FW
FWD
FWD
SET
SET
TIME
WAKE
WAKE
WAKE
1
2
MODE
RADIO ON / BAND - Turns radio on.
Selects between FM and AM radio band.
OFF - Turns power off.
PLAY/PAUSE - Starts and pauses
CD playback.
STOP - Stops CD playback.
MEMO RECALL - In radio mode, access
memory location.
SKIP FORWARD - Skips to the next
track.
MEMO SET - In radio mode, stores
preset memory.
SKIP BACKWARD - Skips to the
previous track.
SLEEP - Activates sleep function.
CD WAKE TRACK - Selects Wake to CD
mode track number.
WAKE CANCEL - Cancels wake settings.
REV
- In clock and wake setting
mode, counts backwards for clock time.
In radio mode, tunes down radio
frequency.
FWD
- In clock and wake setting
mode, moves forward for clock time.
In radio mode, tunes up radio
frequency.
SET TIME / WAKE - Enters clock and
wake setting mode.
MODE - Selects among playback
options: random playback, repeat all
and repeat all with random playback.
SNOOZE - Enters snooze mode where
the alarm will quiet but will sound
again once the snooze period is over.
Note: REV
/ FWD
and SKIP
FORWARD
/ SKIP BACKWARD
buttons have the same function.
WAKE 1 - Activates Wake 1 settings
and change wake 1 mode.
WAKE 2 - Activates Wake 2 settings
and change wake 2 mode.
5
Untitled-2
7
4/1/03, 3:48 PM
General Controls
Side Views
EN
DISPLAY
BRIGHTNESS
VOLUME
NAP
WEEKEND
CANCEL
DAYLIGHT
SAVING
NAP - Activates nap function.
WEEKEND CANCEL - Deactivates Wake
function on weekends (SAT and SUN).
DAYLIGHT SAVING - Enable and
disable Daylight Saving Time in areas
observing/not observing such time
change.
DISPLAY BRIGHTNESS - Adjusts display
light brightness.
VOLUME - Adjusts volume level.
Headphones - Insert headphones
here.
Note: Speakers will still sound when
any wake mode is activated even if
headphone is plugged in.
6
Untitled-2
8
4/1/03, 3:48 PM
Display
e
Clock Display
e e
EN
WEEKEND
CANCEL
AM
PM
TUE WED THU FRI SAT
MON
Wake 1 Display
A
P
Clock Display Section
Wake 2 Display
MHz / kHz - Radio frequency unit.
MON TUE WED THU FRI SAT SUN Weekday indicator
- In clock setting mode.
e e
e
SUN
A
P
- Daylight Saving Time activated.
WEEKEND CANCEL - Weekend cancel
is activated. Wake settings are
cancelled on Sat and Sun.
Wake 1 and Wake 2 Display
- Nap activated.
1 - Wake 1 settings.
- Sleep activated.
2 - Wake 2 settings.
AM - In AM radio band.
- Wake to CD.
FM - In FM radio band.
- Wake to tone.
- Wake to radio.
CD - In CD mode.
A - AM time indicator.
- random playback
P - PM time indicator.
- repeat disc.
- repeat disc and random
playback.
- Wake time.
- In CD mode, displays track
number.
- In radio mode, displays memory
location.
7
Untitled-2
9
4/1/03, 3:48 PM
Setting the Clock
This unit has a built-in automatic time
set system that automatically generates
the correct clock time once the unit is
plugged in. You are not required to set
the clock manually, however, in case
the memory holding batteries are
accidentally removed, you may reset
the clock as follow:
Be sure Time Zone and Daylight Saving
Time is adjusted before operating the
clock.
Weekday Setting
1. Press SET TIME / WAKE button
repeatedly until the weekday icon is
blinking.
2. Press REV or FWD to select the date.
3. The setting will automatically be save
if no buttons are pressed after a few
seconds.
You can also press SET TIME / WAKE
once to save you setting and return
to standby mode.
Setting Clock
EN
1. Press the SET TIME / WAKE button
repeatedly until the clock setting icon
is displayed.
2. Press REV or FWD to set the time.
Press and hold the respective buttons
to fast forward or fast reverse clock
time.
3. Clock time will automatically be
saved if no buttons are pressed after
a few seconds.
You can also press SET TIME /
WAKE twice to save your setting and
return to standby mode.
Note: The clock is in 12 hour format.
The AM and PM indicators will light
to show am and pm time.
8
Untitled-2
10
4/1/03, 3:48 PM
Operating the Radio
EN Built-In AFC
Turning on/off the Radio
The Built-In Automatic Frequency
Control (AFC) works only on FM. It
helps to reduce drift on FM reception
and to keep the radio locked in on the
FM station to which it is tuned.
Press RADIO ON/BAND to turn on the
radio.
Antennas
Selecting Bands
AM Antenna - A built-in ferrite rod
antenna eliminates the need for an
outside antenna for AM reception.
Rotating the unit slightly may improve
reception of distant AM stations.
Press RADIO ON/BAND repeatedly to
select between FM and AM band.
FM Antenna - The power cord acts as
your FM antenna. The power cord
picks up moderate to strong stations
and eliminates the need for an external
antenna in most strong signal areas.
Be sure the power cord is stretched out
to its full length. Do not coil or bunch
the cord together. Changing position
of the power cord may improve
reception.
Press REV to search down radio
frequency.
Press OFF to turn off the radio.
Tuning to Stations
Press FWD to search up radio
frequency.
Press and hold REV or FWD to
automatically search for the next
station in the respective direction.
9
Untitled-2
11
4/1/03, 3:48 PM
Operating the Radio
Radio Frequency Memory
1. Refer to “Selecting Bands” and
“Tuning to Stations” to select the
station to be stored into memory.
2. Press MEMO SET and the next
available memory location will be
displayed with the memory icon
flashing.
3. To select another memory location,
press MEMO RECALL.
4. Once the desired memory location is
selected, press MEMO SET to save
setting.
Memory Recall
EN
1. Press MEMO RECALL repeatedly to
recall preset stations when radio is
on.
Cancel Memory
1. Press MEMO RECALL to select the
memory location you want to cancel.
2. Press and hold MEMO SET to cancel
memory setting.
CD Player
Play and Pause CD
Press
PLAY/PAUSE to begin CD
playback.
Press
PLAY/PAUSE during playback
to pause CD. Press again to resume.
Note: nd will flash on the display if
the disc compartment is empty.
Press
SKIP BACKWARD to skip to
the previous track.
Press and hold SKIP FORWARD or SKIP
BACKWARD to search fast forward or
backwards for the current track in the
respective direction.
Playback Options
Press MODE repeatedly to toggle
playback options.
STOP
Press
STOP to end playback.
The corresponding indicator for each
option will light when selected.
- Random playback.
Skip/Search Tracks
- Repeat All.
Press
SKIP FORWARD to skip to the
next track.
- Random playback and Repeat
all.
10
Untitled-2
12
4/1/03, 3:48 PM
Wake Settings
Wake to Tone
EN Setting WAKE Time
Your digital clock operates on a
12-hour standard mechanism. A will
light for AM time and P will light for
PM time.
1. Press SET TIME / WAKE button
repeatedly until wake 1 or wake 2
icon is blinking.
A
P
A
P
2. Press REV or FWD to set the wake
time.
Press and hold REV or FWD to fast
search reverse or forward clock time.
Waking by Selected Source
Press WAKE 1 or WAKE 2 repeatedly
to select wake source for the
respective wake setting.
You may be woken up by TONE
RADIO
or CD
.
,
The corresponding icon will show on
the display.
When wake to tone is selected, the
icon will be displayed.
The unit is equipped with GRAD-UWAKE feature, the alarm tone volume
will increase gradually to its maximum
in about 30 to 45 seconds.
Tip: If you set SLEEP function with
low volume level before going to bed,
we advise using Wake to tone mode
to wake you up since its volume will
automatically increase.
Wake to Radio
When wake to radio is selected, the
icon will be displayed.
Setting Wake Station
1. Select radio band.
2. Select desired station.
3. Press MEMO SET to enter preset
mode.
4. Press MEMO RECALL repeatedly until
the “AL” memory location is reached.
5. Press MEMO SET to save the station
into alarm memory location.
6. Adjust the volume by turning
VOLUME.
Note: When you turn off the alarm by
pressing OFF
OFF, the alarm will turn on at
the same time tomorrow.
11
Untitled-2
13
4/1/03, 3:48 PM
Wake Settings
Wake to CD
Turning off Alarm
The wake to CD is selected, the
icon will be displayed.
Silence the alarm momentarily
1. Insert a disc into the CD
compartment.
2. Press and hold CD WAKE TRACK
then press REV or FWD to select the
track to wake up to.
3. Press PLAY/PAUSE to listen to the
wake up volume.
4. Adjust the volume until the desired
volume is reached.
5. Press OFF to turn off the unit.
Note: If the CD compartment is
empty, the alarm tone will sound
instead.
Cancel Wake Setting
1. Press WAKE CANCEL.
2. Press WAKE 1 or WAKE 2 button to
cancel the corresponding wake function
permanently.
OFF will be displayed as the Wake
setting.
EN
Press SNOOZE. The alarm will sound
again when the snooze period is over. (see
“Snooze Alarm Operation”).
Stop the alarm
Press OFF. Then, the alarm will be on the
following day at the same time.
Tip: You can activate the previously
set alarm time by pressing WAKE 1
or WAKE 2 button.
Note: Speakers will still sound when
any wake mode is activated even if
headphone is plugged in.
Note: When AC power is interrupted
and the unit is operating through the
DC backup batteries, all wake mode
will work with buzzer instead.
12
Untitled-2
14
4/1/03, 3:48 PM
Operating the Clock
EN Sleep Mode
In sleep mode, the unit will turn off
automatically after a specified time.
Setting Sleep Time
1. Press SLEEP then the time display will
exhibit 0:59 and the radio will turn
on.
2. While holding SLEEP, press REV or
FWD to set the sleep time.
The time range is from 1 minute to 2
hours.
3. Release SLEEP and the current time
will be shown again.
The sleep icon
is displayed when
it is activated.
Sleep to Radio
The radio is turned on after step 3 in
Setting Sleep Time and you may
select the station as usual. The radio
will turn off when the preset time
elapses.
If you decide to turn off the radio
sooner, press SNOOZE or OFF.
Sleep to CD
Press PLAY/PAUSE
after step 3 in
Setting Sleep Time to begin CD playback.
The unit will turn off automatically once
sleep time is reached.
View Remaining Time
Press SLEEP to read the remaining
sleep time.
Note: When SLEEP is activated again,
the sleep time will be the same as the
one you have set before.
Nap Mode
This function wakes you up after a short
period of time. Only alarm sound can be
selected for Nap.
1. Press NAP and release. The
indicator will flash. During this
period, adjust NAP time by pressing
REV or FWD. The range is from 10
minutes to 2 hours.
2. The clock will be shown after 5
seconds if no button is pressed. The
NAP indicator will lit up.
View NAP time
Press NAP once to show time left.
Cancel NAP
Press and hold NAP to cancel the nap
setting.
Stop the Nap alarm
Press NAP or follow “Turning off Alarm”.
Note: Nap will not be activated again
the following day at the same time.
Nap alarm is equipped with GRAD-UWAKE feature.
13
Untitled-2
15
4/1/03, 3:48 PM
Operating the Clock
Snooze Alarm Operation
Seconds Time Display
This operation allows extra sleep time
after the alarm is on. The alarm will
be off by pressing SNOOZE until the
snooze period is over. Snooze function
can be used repeatedly up to 2 hours.
After this, the alarm will turn off until
the next alarm conditions are met. Set
the “quiet” period as follow:
The unit may display in seconds.
1. Press and hold SNOOZE.
2. Press REV or FWD to set the “quiet”
period (the default time is 9 minutes)
from 1 minute to 30 minutes.
Release button, then, the “quiet”
period is set.
You can adjust the backlight of the display
with the DISPLAY BRIGHTNESS button.
There are three levels you may select from:
Observe the change when you press
DISPLAY BRIGHTNESS repeatedly.
EN
1. Press and hold REV or FWD to show
seconds display.
2. Release REV or FWD to return to
the hour and minute display.
Display Brightness
Weekend cancel
If the weekend cancel function is
activated, the alarm will be active
during MON to FRI, and inactive during
SAT and SUN.
Activate Weekend Cancel Function
• Press and hold the WEEKEND CANCEL
button until the WEEKEND CANCEL icon
remains lit on the display.
Deactivate Weekend Cancel Function
• Press and hold the WEEKEND CANCEL
button to cancel this function (the icon
“Weekend Cancel” will disappear.)
14
Untitled-2
16
4/1/03, 3:48 PM
Installing Back-up Batteries
UM3/AA/LR6
UM3/AA/LR6
EASTERN
CENTRAL
UM3/AA/LR6
PACIFIC
MOUNTAIN
Battery Back-Up
The power failure protection circuit
will not operate unless battery is
installed.
When the battery backup functions,
the digital display will not light,
however, the function of wake still
occurs during the power interruption if
remaining battery power is adequate.
Normal operation will resume after AC
power is restored so you will not have
to reset the time or wake.
UM3/AA/LR6
2. Remove battery compartment door
(located at the bottom of the radio)
by applying thumb pressure to the
tab on battery door and then lift the
door out and off the cabinet.
EN
3. Before inserting the batteries,
observe the polarities (That is, + and
-) of the battery, then relate the
polarities to the engraved diagram
inside the battery compartment.
Connect 2 “AA” battery to the
connector plug.
4. Replace the compartment door and
lock the door in place by pushing the
tab towards the compartment door.
NOTE:
We recommend that you replace the
batteries every 2-3 years.
Power Failure Indicator
Installing batteries
UM3/AA/LR6
UM3/AA/LR6
1. Unlock the battery compartment
door (located at the bottom of
the radio) by sliding the tab away
from the door.
When AC power is interrupted
(disconnected) for a short period of time,
both time and alarm settings will change
(unless batteries are installed). After AC
power is restored (reconnected), the
Digital Display will blink to indicate that
power was interrupted and you should
readjust the time and alarm settings.
15
Untitled-2
17
4/1/03, 3:48 PM
U.S. Warranty
What your warranty covers:
• Defects in materials or workmanship.
EN
For how long after your purchase:
• One year from date of purchase.
The warranty period for rental units begins with the first rental or 45 days from date of shipment to
the rental firm, whichever comes first.
What we will do:
• Provide you with a new, or at our option, a refurbished unit. The exchange unit is under warranty
for the remainder of the original product’s warranty period.
• Proof of purchase in the form of a bill of sale or receipted invoice which is evidence that the
product is within the warranty period must be presented to obtain warranty service. For rental
firms, proof of first rental is also required.
How to make a warranty claim:
• Properly pack your unit. Include any cables, etc., which were originally provided with the product.
We recommend using the original carton and packing materials.
• Include evidence of purchase date such as the bill of sale. Also print your name and address and a
description of the defect. Send via standard UPS or its equivalent to:
Thomson Inc.
Product Exchange Center
11721 B Alameda Avenue
Socorro, Texas 79927
• Insure your shipment for of loss or damage. Thomson accepts no liability in case of damage or loss
en route to Thomson.
• Pay any charges billed to you by the Exchange Center for service not covered by the warranty.
• A new or refurbished unit will be shipped to you freight prepaid.
What your warranty does not cover:
• Customer instruction. (Your Owner’s Manual provides information regarding operating Instructions
and user controls. For additional information, ask your dealer.)
• Installation and set-up service adjustments.
• Batteries.
• Damage from misuse or neglect.
• Products which have been modified or incorporated into other products.
• Products purchased or serviced outside the USA.
• Acts of nature, such as but not limited to lightning damage.
16
Untitled-2
18
4/1/03, 3:48 PM
U.S. Warranty
EN
Limitation of Warranty:
• THE WARRANTY STATED ABOVE IS THE ONLY WARRANTY APPLICABLE TO THIS PRODUCT.
ALL OTHER WARRANTIES, EXPRESS OR IMPLIED (INCLUDING ALL IMPLIED WARRANTIES OF
MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE) ARE HEREBY DISCLAIMED. NO
VERBAL OR WRITTEN INFORMATION GIVEN BY THOMSON INC., ITS AGENTS OR EMPLOYEES
SHALL CREATE A GUARANTY OR IN ANY WAY INCREASE THE SCOPE OF THIS WARRANTY.
• REPAIR OR REPLACEMENT AS PROVIDED UNDER THIS WARRANTY IS THE EXCLUSIVE
REMEDY OF THE CONSUMER. THOMSON INC. SHALL NOT BE LIABLE FOR INCIDENTAL OR
CONSEQUENTIAL DAMAGES RESULTING FROM THE USE OF THIS PRODUCT OR ARISING OUT
OF ANY BREACH OF ANY EXPRESS OR IMPLIED WARRANTY ON THIS PRODUCT. THIS
DISCLAIMER OF WARRANTIES AND LIMITED WARRANTY ARE GOVERNED BY THE LAWS OF
THE STATE OF INDIANA. EXCEPT TO THE EXTENT PROHIBITED BY APPLICABLE LAW, ANY
IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE ON
THIS PRODUCT IS LIMITED TO THE APPLICABLE WARRANTY PERIOD SET FORTH ABOVE.
How state law relates to this warranty:
• Some states do not allow the exclusion nor limitation of incidental or consequential damages, or
limitations on how long an implied warranty lasts, so the above limitations or exclusions may not
apply to you.
• This warranty gives you specific legal rights, and you also may have other rights that vary from
state to state.
If you purchased your product outside the USA:
This warranty does not apply. Contact your dealer for warranty information.
17
Untitled-2
19
4/1/03, 3:48 PM
Canadian Warranty
Thomson multimedia Ltd. warrants to the purchaser or gift recipient that if any manufacturing
defect becomes apparent in this product within 1 year from the original date of purchase, it will be
replaced free of charge, including return transportation.
EN
This warranty does not include damage to the product resulting from accidents, misuse or leaking
batteries.
Should your product not perform properly during the warranty period, either:
1. Return it to the selling dealer with proof of purchase for replacement,
OR
2. Remove the batteries (where applicable), and pack product complete with accessories in the
original carton (or equivalent). Mail prepaid (with proof of purchase) and insured to:
Thomson multimedia Ltd.
6200 Edwards Blvd.,
Mississauga, Ontario,
L5T 2V7
Canada
The provisions of this written warranty are in addition to and not a modification of or subtraction
from the statutory warranties and other rights and remedies contained in any applicable legislation,
and to the extent that any such provisions purport to disclaim, exclude or limit any such statutory
warranties and other rights and remedies, such provisions shall be deemed to be amended to the
extent necessary to comply therewith.
If you are unable to find a qualified servicer for out of warranty service, you may write to:
Thomson Inc.
P.O. Box 0944
Indianapolis, Indiana, U.S.A., 46206-0944
Attach your sales receipt to this booklet for future reference. This information is required if service is
needed during the warranty period.
PURCHASE DATE
NAME OF STORE
18
Untitled-2
20
4/1/03, 3:48 PM
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement