Read First! Important! Reminders!

Read First! Important! Reminders!
Read First! Important! Reminders!
Please read the following information before connecting your
new Datalogic Heron D130 corded or Datalogic Gryphon GM4100
USB cordless handheld scanner. The information below is
intended to reduce problems and to maximize your scanner
You do not need a charging cable. The Gryphon GM4100 USB
cordless uses its USB cable and cradle to charge the barcode
reader. The scanner also self-charges during the scanning
 Do not configure your Datalogic scanner. Your new scanner
has already been set up and configured. No further
configuration is required!
 Do not install a Datalogic scanner driver. There is no Datalogic scanner installation
CD-ROM. A Datalogic scanner driver is not needed in order to scan from within
 The Gryphon GM4100 USB cordless scanner is shipped with a reader, charging
cradle, and USB cable.
 Read the “Scanning and Printing Barcodes with OfficeMate Software” document that
was shipped with the printer for complete instructions on how to use your new
Datalogic scanner with OfficeMate.
 Read the Datalogic Reference Manual that shipped with
your scanner for additional information and instructions.
 Questions? First check the online Knowledge Base at for answers and then refer to
the OfficeMate User’s Guide or F1 Online Help. If you have
additional questions, call Customer Care at 1.800.942.5353
and select option 1.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF