T50-T70 Treadmill Rev.1.2.indd
HZ SERIES
FOR MODELS :
T50
T70
TREADMILL USER’S GUIDE
INTRODUCTION
IN T R O D U C T I O N
IMPORTANT
PRECAUTIONS
CONGRATULATIONS and THANK YOU for your purchase of this Horizon Series treadmill!
ASSEMBLY
Whether your goal is to win races or simply enjoy a fuller, healthier lifestyle, a Horizon Series treadmill
can help you attain it – adding club-quality performance to your at-home workouts, with the ergonomics
and innovative features you need to get stronger and healthier, faster. Because we're committed to
designing fitness equipment from the inside out, we use only the highest quality components. It's a
commitment we back with one of the strongest frame-to-motor warranty packages in the industry.
You want exercise equipment that offers the most comfort, the best reliability and the highest quality
in its class.
BEFORE
YOU BEGIN
The Horizon Series delivers.
Assembly
6
Before You Begin
10
Treadmill Operation
13
Conditioning Guidelines
20
Troubleshooting & Maintenance
27
Limited Warranty
30
Back Panel
3
LIMITED
WARRANTY
CONTACT INFORMATION
CONDITIONING
GUIDELINES
4
TROUBLESHOOTING
& MAINTENANCE
Important Precautions
TREADMILL
OPERATION
TABLE OF CO NT ENT S
INTRODUCTION
I M P O R TA N T PRECAUTIONS
SAVE THESE INSTRUCTIONS
IMPORTANT
PRECAUTIONS
Read all instructions before using this treadmill. When using an electrical product, basic precautions
should always be followed, including the following: Read all instructions before using this treadmill. It is the
responsibility of the owner to ensure that all users of this treadmill are adequately informed of all warnings
and precautions. If you have any questions after reading this manual, contact Customer Tech Support at the
number listed on the back panel of this manual.
ASSEMBLY
WARNING
Connect this exercise product to a properly grounded outlet only. See grounding
instructions.
BEFORE
YOU BEGIN
GROUNDING INSTRUCTIONS
This product must be grounded. If a treadmill should malfunction or breakdown, grounding provides a path
of least resistance for electrical current to reduce the risk of electrical shock. This product is equipped with
a cord having an equipment-grounding conductor and a grounding plug. The plug must be plugged into an
appropriate outlet that is properly installed and grounded in accordance with local codes and ordinances.
TREADMILL
OPERATION
WARNING
Improper connection of the equipment-grounding conductor can result in a risk of
electric shock. Check with a qualified electrician or serviceman if you are in doubt
as to whether the product is properly grounded. Do not modify the plug provided
with the product. If it will not fit the outlet, have a proper outlet installed by a
qualified electrician.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
This product is for use on a nominal 120-volt circuit, and has a grounding plug that looks like the plug
illustrated below. A temporary adapter such as the one illustrated below may be used to connect this plug to
a 2-pole receptacle as shown, if a properly grounded outlet is not available. The temporary adapter should
be used only until a properly grounded outlet can be installed by a qualified electrician. The green colored
rigid ear, lug, or the like extending from the adapter must be connected to a permanent ground such as
a properly grounded outlet box cover. Whenever the adapter is used, it must be held in place by a metal
screw.
3-Pole Grounded Outlet
2-Pole Outlet in Grounded Box
ADAPTER
LIMITED
WARRANTY
GROUNDED
TREADMILL
POWER CORD
GROUNDED
TREADMILL
POWER CORD
METAL GROUNDING SCREW
4
INTRODUCTION
IMPORTANT
PRECAUTIONS
WARNING To reduce the risk of burns, fire, electrical shock or injury to persons:
TREADMILL
OPERATION
BEFORE
YOU BEGIN
ASSEMBLY
• Never use the treadmill before securing the safety tether clip to your clothing.
• If you experience chest pains, nausea, dizziness, or shortness of breath, stop exercising immediately and
consult your physician before continuing.
• Do not wear clothes that might catch on any part of the treadmill.
• Always wear athletic shoes while using this equipment.
• Do not jump on the treadmill.
• Keep power cord away from heated surfaces.
• Do not insert or drop any object into any opening.
• Unplug treadmill before moving or cleaning it. To clean, wipe surfaces down with soap and slightly damp
cloth only; never use solvents. (See MAINTENANCE)
• At no time should more than one person be on treadmill while in operation.
• The treadmills should not be used by persons weighing more than 275 pounds (T50) and 300 pounds (T70).
Failure to comply will void the warranty.
• The treadmills are intended for in-home use only. Do not use this treadmill in any commercial, rental,
school or institutional setting. Failure to comply will void the warranty.
• Do not use treadmill in any location that is not temperature controlled, such as garages, porches, pool
rooms, bathrooms, car ports or outdoors. Failure to comply may void the warranty.
• Use the treadmill only as described in this manual.
CONDITIONING
GUIDELINES
At NO time should pets or children under the age of 12 be closer to the treadmill than 10 feet.
At NO time should children under the age of 12 use the treadmill.
Children over the age of 12 should not use the treadmill without adult supervision.
OTHER SAFETY TIPS FOR YOUR TREADMILL
OPERATION
TROUBLESHOOTING
& MAINTENANCE
To reduce the risk of damaging important components on your treadmill, it is strongly
recommended that your treadmill is plugged into a dedicated 20 amp outlet, without
the use of an additional extension cord and/or power strip.
IMPORTANT: The treadmill is not compatible with GFCI-equipped outlets.
It is essential that your treadmill is used only indoors, in a climate controlled room. If your treadmill has been
exposed to colder temperatures or high moisture climates, it is strongly recommended that the treadmill is
warmed up to room temperature before first time use. Failure to do so may cause premature electronic failure.
5
LIMITED
WARRANTY
WARNING
INTRODUCTION
A S S E M B LY
IMPORTANT
PRECAUTIONS
IMPORTANT: READ THESE SAFETY INSTRUCTIONS BEFORE USE!
WARNING
ASSEMBLY
During the assembly process of the treadmill there are several areas that special attention must be paid.
It is very important to follow the assembly instructions correctly and to make sure all parts are firmly
tightened. If the assembly instructions are not followed correctly, the treadmill could have frame parts that
are not tightened and will seem loose and may cause irritating noises. There should be no side-to-side play
in the console masts or any forward and back play in the console assembly or handlebars. If there is any
play in these areas, the treadmill has not been properly assembled. To prevent damage to the treadmill, the
assembly instructions must be reviewed and corrective actions should be taken.
BEFORE
YOU BEGIN
UNPACKING
TREADMILL
OPERATION
Place the treadmill carton on a level flat surface. It is recommended that you place a protective covering on
your floor. Take CAUTION when handling and transporting this unit. Never open box when it is on its side.
Once the banding straps have been removed, do not lift or transport this unit unless it is fully assembled
and in the upright folded position, with the lock latch secure. Unpack the unit where it will be used. The
enclosed treadmill is equipped with high-pressure shocks and may spring open if mishandled. Never grab
hold of any portion of the incline frame and attempt to lift or move the treadmill. FAILURE TO FOLLOW THESE
INSTRUCTIONS COULD RESULT IN INJURY!
CONDITIONING
GUIDELINES
Before proceeding, find your treadmill’s serial number
and model name located to the left of the on/off
power switch and power cord and enter it in the space
provided below.
TROUBLESHOOTING
& MAINTENANCE
ENTER YOUR SERIAL NUMBER AND
MODEL NAME IN THE BOXES BELOW:
SERIAL NUMBER:
MODEL NAME:
LIMITED
WARRANTY
* Refer to the SERIAL NUMBER and MODEL NAME when calling for service.
* Also enter this serial number on your Warranty Card.
6
WATER BOTTLE HOLDER
GRIP PULSE HANDRAILS
ON/OFF SWITCH
CIRCUIT BREAKER
INTRODUCTION
CONSOLE
TOUCH PAD PANEL WITH LCD WINDOWS
AND SPEED INCLINE INDICATORS
IMPORTANT
PRECAUTIONS
READING RACK
SAFETY KEY PLACEMENT
CONSOLE MAST
MOTOR COVER
FOOT LOCK LATCH
ASSEMBLY
POWER CORD
RUNNING BELT / RUNNING DECK
SIDE RAIL
TRANSPORT WHEEL
SIDE RAIL
BEFORE
YOU BEGIN
ROLLER END CAP
REAR ROLLER ADJUSTMENT CAPS
TREADMILL
OPERATION
T70 SHOWN
TOOLS INCLUDED
CONDITIONING
GUIDELINES
5 mm Allen Wrench/Phillips Screw Driver
6 mm T-Wrench
Flat Wrench
PARTS INCLUDED
NOTE : If you have questions or if there are any missing parts, we will guarantee complete satisfaction.
Customer Tech Support contact information is located on the back panel of this manual.
7
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
1 Safety Key
1 Console Assembly
1 Power Cord
2 Hardware Bags
INTRODUCTION
PR E - A S S E M B LY
IMPORTANT
PRECAUTIONS
WARNING
DO NOT CUT STRAPS UNTIL STEP 1-E!* Disassemble box and remove the
cardboard packaging that is not beneath the treadmill. Do not attempt to lift the
treadmill at this time. Remove plastic wrap from console masts.
NOTE: It is recommended that you apply grease to the threads of each bolt as you assemble your treadmill, to
prevent loosening and noise. Also, during each assembly step, ensure that ALL nuts and bolts are in place and
partially threaded in before completely tightening any ONE bolt.
ASSEMBLY
A S S E M B LY S T E P 1
HARDWARE BAG 1 CONTENTS :
BEFORE
YOU BEGIN
��������
�����
������
��������
TREADMILL
OPERATION
������������
����
A Open HARDWARE BAG 1.
B Lift LEFT CONSOLE MAST into
upright position. Be sure to hold
the console mast firmly, as it
will not stay in the upright
position on its own.
C Move LEFT SIDE LINKAGE ARM
into position. Insert BOLT (A)
and tighten.
D Repeat on the right side.
������
CONDITIONING
GUIDELINES
���������������������
E Now cut the banding straps and
remove remaining packaging
material.*
* NOTE: If the straps have been removed before completing step 1-D and the linkage arms cannot be aligned,
refer to the TROUBLESHOOTING section (page 28) in order to restore the treadmill to its proper position.
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
8
INTRODUCTION
ASSEMBLY S T E P 2
A Open HARDWARE BAG 2.
��������
�����
������
��������
�����
������
�������
�����
������
IMPORTANT
PRECAUTIONS
B With the running deck in the
lowered position, pull CONSOLE
CABLE through right side
handlebar and pull PULSE
GRIP WIRES through both
handlebars.
�������������
���������
�������
��������
* Be sure to tighten bolts after all are lined up.
E Gently place CONSOLE on top of
handlebars. Connect CONSOLE
CABLE and PULSE GRIP WIRES
carefully tucking wires in masts
to avoid damage.
NOTE: Do not pinch console
cable or grip pulse wires.
BEFORE
YOU BEGIN
���������������
D Place 2 BOLTS (B) into OUTSIDE
of upright MASTS and tighten
with NUT (C).
TREADMILL
OPERATION
�������
ASSEMBLY
C Slide handlebar into the top
holes of the upright masts.
F Place 4 BOLTS (D) into INSIDE
of upright MASTS and tighten.
CONDITIONING
GUIDELINES
ASSEMBLY S T E P 3
TROUBLESHOOTING
& MAINTENANCE
Connect power plug to the
treadmill and connect the cord to
a power outlet. The on/off switch
is located next to the power
cord. Flip this switch to the ‘on’
position, so that the switch is
lit. You will hear a beep and the
console will light up.
YOU’RE FINISHED!
9
LIMITED
WARRANTY
HARDWARE BAG 1 CONTENTS :
INTRODUCTION
B E F O R E Y O U BEGIN
IMPORTANT
PRECAUTIONS
CONGRATULATIONS! on choosing your treadmill. You’ve taken an important step in developing and
sustaining an exercise program! Your treadmill is a tremendously effective tool for achieving your personal
fitness goals. Regular use of your treadmill can improve the quality of your life in so many ways.
HERE ARE JUST A FEW OF THE HEALTH BENEFITS OF EXERCISE:
ASSEMBLY
• Weight Loss
• A Healthier Heart
• Improved Muscle Tone
• Increased Daily Energy Levels
The key to reaping these benefits is to develop an exercise habit. Your new treadmill will help you eliminate
obstacles that prevent you from exercising. Inclement weather and darkness won't interfere with your
workout when you use your treadmill in the comfort of your home. This guide provides you with basic
information for using and enjoying your new machine.
BEFORE
YOU BEGIN
LOCATION OF THE TREADMILL
TREADMILL
OPERATION
Place the treadmill on a level surface. There should be 6 feet of clearance
behind the treadmill, 3 feet on each side and one foot in front for folding
and the power cord. Do not place the treadmill in any area that will block
any vent or air openings. The treadmill should not be located in a garage,
covered patio, near water or outdoors.
1 foot
3 feet
3 feet
WARNING
CONDITIONING
GUIDELINES
DO NOT STAND ON THE BELT
While you are preparing to use the treadmill, do not stand on the belt.
Place your feet on the side rails before starting the treadmill. Start
walking on the belt only after the belt has begun to move. Never start the
treadmill at a fast running speed and attempt to jump on!
6 feet
TROUBLESHOOTING
& MAINTENANCE
SAFETY KEY
Your treadmill will not start unless the safety key is placed in position. Attach the clip end securely to your
clothing. This safety key is designed to cut the power to the treadmill if you should fall. Check the operation
of the safety key every 2 weeks.
LIMITED
WARRANTY
WARNING
10
NEVER USE THE TREADMILL WITHOUT SECURING THE SAFETY KEY CLIP TO YOUR
CLOTHING. PULL ON THE SAFETY KEY CLIP FIRST TO MAKE SURE IT WILL NOT
COME OFF YOUR CLOTHING.
INTRODUCTION
IMPORTANT
PRECAUTIONS
PROPER USAGE
BEFORE
YOU BEGIN
Do not operate the treadmill if the power cord or plug is damaged.
If the treadmill appears to not be working properly, do not use the treadmill.
FOLDING
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
Firmly grasp the back end of the treadmill. Carefully
lift the end of the treadmill deck into the upright
position until the foot lock latch engages and
securely locks the deck into position. Make sure the
deck is securely latched before letting go. To unfold,
firmly grasp the back end of the treadmill. Gently
press down on the foot lock latch with your foot until
the lock latch disengages. Carefully lower the deck
to the ground.
MOVING
WARNING
TROUBLESHOOTING
& MAINTENANCE
Your treadmill has a pair of transport wheels built
into the frame. To move, make sure the treadmill is
folded and securely latched. Then firmly grasp the
handlebars, tilt the treadmill back and roll.
Our Treadmills are heavy, use care and additional help if necessary when moving.
Do not attempt to move or transport treadmill unless it is in the upright, folded
position with the lock latch secured. Failure to follow these instructions could
result in injury.
11
LIMITED
WARRANTY
WARNING
ASSEMBLY
Your treadmill is capable of reaching high speeds. Always start off using a slower speed and adjust the speed in
small increments to reach a higher speed level. Never leave the treadmill unattended while it is running. When
not in use, remove the safety key, turn the on/off switch to off and unplug the power cord. Make sure to follow the
MAINTENANCE schedule located on page 29 in this manual. Never step onto the treadmill when it is moving more
than 0.5 mph. Keep your body and head facing forward. Do not attempt to turn around or look backwards while
the treadmill is running. Stop your workout immediately if you feel pain, faint, dizzy or are short of breath.
INTRODUCTION
TENSIONING THE RUNNING BELT
IMPORTANT
PRECAUTIONS
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment.
ASSEMBLY
CAUTION: Running belt should NOT be moving during
tensioning. Over-tightening the running belt can
cause excessive wear on the treadmill as well as its
components. Never over-tighten the belt.
BEFORE
YOU BEGIN
If you can feel a slipping sensation when running on the
treadmill, the running belt must be tightened. In most
cases, the belt has stretched from use, causing the belt
to slip. This is a normal and common adjustment. To
eliminate this slipping, turn the treadmill off and tension
BOTH THE REAR ROLLER BOLTS using the supplied Allen
wrench, turning them 1/4 TURN to the right as shown.
Turn the treadmill on and check for slipping. Repeat if
necessary, but NEVER TURN the roller bolts more than
1/4 turn at a time. Belt is properly tensioned when the
slipping sensation is gone.
CENTERING THE RUNNING BELT
TREADMILL
OPERATION
The running belt has been properly adjusted at the
factory before it was shipped. At times the belt can
move off-center during shipment. Before operating the
treadmill, make sure the belt is centered and remains
centered to maintain smooth operation.
CAUTION: Do not run belt faster than 1/2 mph while
centering. Keep fingers, hair and clothing away from
belt at all times.
CONDITIONING
GUIDELINES
Belt is too far to the right side
If the running belt is too far to the right side:
TROUBLESHOOTING
& MAINTENANCE
With the treadmill running at 1/2 mph, turn the right
adjustment bolt clockwise 1/4 TURN at a time (using
the supplied Allen wrench). Check the belt alignment.
Allow belt to run a full cycle to gauge if more adjustment
is needed. Repeat if necessary, until the belt remains
centered during use.
If the running belt is too far to the left side:
Belt is too far to the left side
LIMITED
WARRANTY
12
With the treadmill running at 1/2 mph, turn the right
adjustment bolt counter-clockwise 1/4 TURN at a time
(using the supplied Allen wrench). Check the belt
alignment. Allow belt to run a full cycle to gauge if more
adjustment is needed. Repeat if necessary, until the
belt remains centered during use.
INTRODUCTION
T R E A D M I L L O P E R ATION
�
�
�
�
�
�
�
�
IMPORTANT
PRECAUTIONS
�
�� �� ��
����
� � ��
� � ��
���
�� �
����
����
�����
������������������
���
���
���
���
�
�
�
�
���
�
�
�
�� �� �
� �
�
�
� ���
�
���
�������
���
�������������
�
�
�
�
�
�����
����
��������
�����
�����
�����
� ���
����
���
�
��
� ��
�����
��
��
�� ���
�����
���
���
���
�
� � � �
�
����
����
�����
�� �� ��
�� ��
�� �� ��
�� ��� �
��� �
�� ��� ��
����
ASSEMBLY
���
����
��
����
�����
��������������
�
�� ���
��������������
�� �� � ��
�
�
�
�����
�����
� ���
�������������
�
����
�
BEFORE
YOU BEGIN
�� ��
���
�
Note: There is a thin protective sheet of clear plastic on the overlay of the console and should be removed.
TREADMILL
OPERATION
A) LCD DISPLAYS: Speed, Time, Pulse, Distance, Incline, Calories and Program Profiles (T50 has 2 large LCD Displays).
B) STOP: Press to pause/end your workout. Hold for 3 seconds to reset the treadmill.
C) START: Simply press to begin exercising or starts your program.
D) ENTER: Used to select Program, Level and Time. Press to change display feedback during workout, Hold to scan.
CONDITIONING
GUIDELINES
E) ONE-TOUCH INCLINE KEYS: Used to reach desired incline more quickly.
F) ONE-TOUCH SPEED KEYS: Used to reach desired speed more quickly.
G) ONE TOUCH PROGRAM KEYS: Use for easy program selection (T70 only).
H) INCLINE ARROW KEYS: Used to adjust incline in small increments (0.5% increments).
J) BACK-LIT INCLINE INDICATORS: Illuminate to indicate current incline.
K) BACK-LIT SPEED INDICATORS: Illuminate to indicate current speed.
L) SAFETY KEY POSITION: Enables treadmill when safety key is inserted.
M) WATER BOTTLE / CD / MP3 HOLDERS: Holds personal workout equipment.
N) READING RACK: Holds reading material. (Remove sales sticker before use)
13
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
I) SPEED ARROW KEYS: Used to adjust speed in small increments (0.1 mph increments).
INTRODUCTION
M O N I T O R D I S P L AY
IMPORTANT
PRECAUTIONS
SPEED • Shown as MPH. Indicates how fast your
walking or running surface is moving.
TIME • Shown as Minutes:Seconds. View the time
������������������
remaining or the time elapsed in your workout.
PULSE • Shown as Beats Per Minute. Used to monitor
ASSEMBLY
your heart rate (displayed when contact is made with
both pulse grips).
�
�
�
�
�
�
�
�� �� �
� �
�
�
� ���
�
���
�������
��������
�������������
�
�
�
�
�
�����
����
DISTANCE • Shown as Miles. Indicates distance
traveled during your workout.
INCLINE • Shown as Percent. Indicates the incline of your walking or running surface.
BEFORE
YOU BEGIN
CALORIES • Total Calories burned during your workout.
TREADMILL
OPERATION
H E A R T R AT E
HANDLEBARS
CONDITIONING
GUIDELINES
Place the palm of your hands directly on the grip pulse handlebars. Both hands must grip the bars for your heart
rate to register. It takes 5 consecutive heart beats (15-20 seconds) for your heart rate to register. When gripping
the pulse handlebars, do not grip tightly. Holding the grips tightly may elevate your blood pressure. Keep a loose,
cupping hold. You may experience an erratic readout if consistently holding the grip pulse handlebars. Make
sure to clean the pulse sensors to ensure proper contact can be maintained. (See page 28).
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
14
INTRODUCTION
G ETTING S TA R T E D / S E L E C T I N G A P R O G R A M
IMPORTANT
PRECAUTIONS
1) Check to make sure nothing is on or will hinder the movement of the treadmill.
2) Plug in the power cord and turn the treadmill ON.
3) Stand on the side rails of the treadmill.
4) Attach the safety key clip to part of your clothing.
ASSEMBLY
5) Place the safety key on the magnetic safety key holder.
6) You have two options to start your workout:
A) QUICK START UP
Simply press the START key to begin working out. OR...
B) SELECT A PROGRAM
BEFORE
YOU BEGIN
Select a PROGRAM using the SPEED ARROW keys.
Once a PROGRAM has been chosen, press ENTER.
SELECT A LEVEL
TREADMILL
OPERATION
Select a PROGRAM LEVEL using the ARROW keys.
Once a PROGRAM LEVEL has been chosen, press ENTER.
SELECT A TIME
Select a Time using the ARROW keys or use the default time.
Once a TIME has been chosen, press START.
FINISHING YOUR WORKOUT
CONDITIONING
GUIDELINES
When your workout is complete, the LCD DISPLAY will flash and beep. Your workout information will stay
displayed on the console for 30 seconds and then reset.
CLEAR CURRENT SELECTION
To clear the current program selection or screen, hold the STOP button for 4-5 seconds.
To have the display screen rotate continuously (Speed and Time, Pulse and Distance, Incline and Calories),
hold the ENTER button for 4-5 seconds.
15
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
SCAN VIEWING SCREENS (T50 ONLY)
INTRODUCTION
P R O G R A M I N F O R M AT I O N
IMPORTANT
PRECAUTIONS
PMANUAL
ROGRAM: MANUAL
(T50, T70 models)
INTERVALS
Allows ‘On The Fly’ manual SPEED and INCLINE changes. Time-based goal.
ROLLING
MANUAL
WEIGHT LOSS
INTERVALS
ASSEMBLY
P R O G R A M : I N T E R VA L S
(T50, T70 models)
GOLF COURSE
Walk or run aROLLING
series of alternating SPEED levels. Time-based goal with 10 difficulty levels to choose from.
RACE
WEIGHT LOSS
INTERVALS PROGRAM SEGMENTS
CUSTOM 1
GOLF COURSE
MPH
BEFORE
YOU BEGIN
TREADMILL
OPERATION
1
2
3
4
1.0
1.5
2.0
4.0
2.0
4.0
CUSTOM
RACE 2 Level 2
1.0
1.5
2.0
4.5
2.0
4.5
Level 3
1.3
1.9
2.5
5.0
2.5
5.0
Level 4
CUSTOM
THR ZONE1 1
Level 5
1.3
1.9
2.5
5.5
2.5
5.5
1.5
2.3
3.0
6.0
3.0
6.0
Level 6
THR
ZONE2 2Level 7
CUSTOM
1.5
2.3
3.0
6.5
3.0
6.5
1.8
2.6
3.5
7.0
3.5
7.0
Level 8
1.8
2.6
3.5
7.5
3.5
7.5
VALLEY Level 9
THR ZONE 1
Level 10
2.0
3.0
4.0
8.0
4.0
8.0
2.0
3.0
4.0
8.5
4.0
8.5
TOUR
THR ZONE 2
VALLEY
CONDITIONING
GUIDELINES
TOUR
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
16
WARM-UP
Level 1
SEGMENTS ARE REPEATED UNTIL SELECTED
TIME IS REACHED
(peak segments last 30 seconds, valley segments last 90 seconds)
COOL DOWN
1.5
1.0
1.5
1.0
1.9
1.3
1.9
1.3
2.3
1.5
2.3
1.5
2.6
1.8
2.6
1.8
3.0
2.0
3.0
2.0
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
INTRODUCTION
MANUAL
INTERVALS
ROLLING G R A M : R O L L I N G
PRO
(T70 model)
2
3
4
5
6
7
8
1.0
RACE
1.3
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
1.5
CUSTOM
1.8 1
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
Level 4
2.6
3.5
4.0
4.5
5.0
5.5
5.0
4.5
4.0
Level 5
2.0
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
Level 6
2.3
CUSTOM 2
2.5
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
Level 2
Level 3
Level 7
3.8
5.0
5.5
6.0
6.5
7.0
6.5
6.0
5.5
2.8
4.1
MANUAL
THR3.0
ZONE 1 4.5
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
Level 10 INTERVALS
3.3
4.9
THR ZONE 2
6.5
7.5
7.5
8.0
8.5
8.0
7.5
7.0
Level 8
Level 9
COOL-DOWN
2.3
1.5
2.6
1.8
3.0
2.0
3.4
2.3
3.8
2.5
4.1
2.8
4.5
3.0
4.9
3.3
5.3
3.5
5.6
3.8
ASSEMBLY
1
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
BEFORE
YOU BEGIN
Level 1
ROLLING PROGRAM SEGMENTS (all segments last 30 seconds)
SEGMENTS ARE REPEATED UNTIL SELECTED
TIME IS REACHED
GOLF COURSE
WARM-UP
MPH
IMPORTANT
PRECAUTIONS
Motivates with
different
WEIGHT
LOSS combinations of SPEED. Time-based goal with 10 difficulty levels to choose from.
ROLLING
VALLEY
WEIGHT LOSS
PRO
GRAM: WEIGHT LOSS
(T50, T70 models)
TOUR
Level 4
3
4
5
6
7
8
1.5
1.5
1.0
0.5
0.5
0.5
1.0
1.5
0.5
0.0
CUSTOM 1 1.0
Speed
1.5
2.0
2.5
3.0
3.5
4.0
3.5
3.0
2.5
2.3
1.5
0.0
0.5
1.5
1.5
1.0
0.5
1.0
0.5
1.0
1.5
0.5
0.0
Speed
1.3
CUSTOM 2
Elevation
0.5
1.9
2.5
3.0
3.5
4.0
4.5
4.0
3.5
3.0
2.6
1.8
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
1.5
2.3
3.0
3.5
4.0
4.5
5.0
4.5
4.0
3.5
3.0
2.0
THR ZONE 0.5
1
Elevation
1.0
2.0
2.0
1.5
1.0
1.0
1.0
1.5
2.0
1.0
0.5
3.4
2.3
1.5
1.0
3.8
2.5
1.5
1.0
4.1
2.8
2.0
1.5
4.5
3.0
2.0
1.5
4.9
3.3
2.5
2.0
Elevation
Speed
1.8
2.6
3.5
4.5
4.5
5.0
5.5
5.0
4.5
4.5
Level 5
Elevation
THR ZONE 1.5
2
Speed
2.0
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
3.0
4.0
4.5
5.0
5.5
6.0
5.5
5.0
4.5
Level 6
Elevation
VALLEY
Speed
1.5
1.5
2.5
2.5
2.0
1.5
1.5
1.5
2.0
2.5
2.3
3.4
4.5
5.0
5.5
6.0
6.5
6.0
5.5
5.0
Level 7
Elevation
TOUR
Speed
1.5
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
2.5
3.8
5.0
5.5
6.0
6.5
7.5
6.5
6.0
5.5
Elevation
1.5
2.0
3.0
3.0
2.5
2.0
2.0
2.0
2.5
3.0
Level 8
Level 9
Level 10
COOL-DOWN
Speed
Speed
2.8
4.1
5.5
6.0
6.5
7.0
7.5
7.0
6.5
6.0
Elevation
2.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
Speed
3.0
4.5
6.0
6.5
7.0
7.5
8.0
7.5
7.0
6.5
5.3
3.5
Elevation
2.0
2.5
3.5
3.5
3.0
2.5
2.5
2.5
3.0
3.5
2.5
2.0
Speed
3.3
4.9
6.5
7.0
7.5
8.0
8.5
8.5
7.5
7.0
5.6
3.8
CONDITIONING
GUIDELINES
Level 3
2
0.5
TROUBLESHOOTING
& MAINTENANCE
Level 2
WARM-UP
SEGMENTS ARE REPEATED UNTIL SELECTED TIME IS REACHED
Level 1
1
0.0
Elevation
(WARM-UP and COOL-DOWN last 5:00 minutes each and are included in program times)
17
LIMITED
WARRANTY
RACE
TREADMILL
OPERATION
Challenges with various combinations of hills and valleys (INCLINE & SPEED levels). Time-based goal with 10
GOLF COURSE
difficulty levels to choose from.
WEIGHT LOSS PROGRAM SEGMENTS (all segments last 30 seconds)
INTERVALS
INTRODUCTION
ROLLING
WEIGHT LOSS
PGOLFRCOURSE
OGRAM: GOLF COURSE
(T70 model)
IMPORTANT
PRECAUTIONS
Simulates various
RACE INCLINES and yardages for holes on a golf course, with 4 tee-off boxes and 9 or 18 holes to choose
from. Distance-based goal.
HOLE
NUMBER:
CUSTOM 1
1
GOLF COURSE PROGRAM SEGMENTS
2
3
4
5
6
7
8
9
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
359
283
256
113
387
91
351
333
White tee
9 holes
Elevation 0.0 1.0
THR ZONE
Distance
3311 427
2.0
3.0
2.5
1.0
2.0
2.5
1.5
330
295
129
466
91
369
431
Blue tee
9 holes
Elevation
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
Distance
3452 460
THR ZONE
337
308
142
484
97
389
441
Black tee
9 holes
Elevation
Red tee
9 holes
Elevation 0.0
CUSTOM 2
Distance 309
ASSEMBLY
0.0
10
12
13
14
15
16
17
18
2875
3003
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
Distance 376
VALLEY
Elevation 0.0
502
374
327
187
500
106
416
462
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance 309
TOUR
Elevation 0.0
359
283
256
113
387
91
351
333
301
301
165
288
434
312
310
150
455
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
331
427
330
295
129
466
97
369
431
407
339
179
368
548
349
376
166
509
Blue tee
18 holes
Elevation
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.0
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
345
460
337
308
142
484
97
389
441
413
349
187
376
560
373
383
383
532
Black tee
18 holes
Elevation
0.0
1.0
2.0
3.0
2.5
1.0
2.0
2.5
1.5
3.5
2.5
2.0
4.0
2.5
3.0
2.0
5.0
2.0
Distance
376
502
374
327
187
500
106
416
462
430
373
201
393
572
396
401
178
543
BEFORE
YOU BEGIN
White tee
18 holes
TOTAL
DISTANCE
2482
0.0
Red tee
18 holes
3250
Distance = Yards
TREADMILL
OPERATION
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
18
11
5198
6116
6348
6737
INTRODUCTION
WEIGHT LOSS
GOLF COURSE
RACE
CUSTOM 1
PRO
GRAM: CUSTOM
(T70 model)
IMPORTANT
PRECAUTIONS
Lets you create
and2 reuse a perfect workout for you with specific speed, incline and time combination.
CUSTOM
The ultimate in personal programming. Time-based goal.
THR ZONE 1
1. Once the CUSTOM program has been chosen, press ENTER
THR ZONE 2
2. Choose the desired TIME using the SPEED ARROW KEYS and press ENTER.
VALLEY
ASSEMBLY
3. Choose the desired SPEED for each segment, using the SPEED ARROW KEYS
and press ENTER. Note: You will need to press ENTER after each segment.
TOUR
4. Choose the desired INCLINE for each segment, using the SPEED ARROW KEYS
and press ENTER. Note: You will need to press ENTER after each segment.
BEFORE
YOU BEGIN
5. Press START to begin your program. At this time, your program has been
successfully saved into memory, and can be used for future workouts.
• To RESET your program information and delete it from memory, press and hold
the ENTER key for 5 seconds (after you have selected the CUSTOM program).
19
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
CONDITIONING
GUIDELINES
TREADMILL
OPERATION
• While using your saved program, you are able to adjust the speed or incline, but
any changes will not be saved.
INTRODUCTION
C O N D I T I O N I NG GUIDELINES
IMPORTANT
PRECAUTIONS
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
HOW OFTEN? (Frequency of Workouts)
ASSEMBLY
The American Heart Association recommends that you exercise at least 3 to 4 days per week to maintain
cardiovascular fitness. If you have other goals such as weight or fat loss, you will achieve your goal faster with
more frequent exercise. Whether it’s 3 days or 6 days, remember that your ultimate goal should be to make
exercise a lifetime habit. Many people are successful staying with a fitness program if they set aside a specific
time of day to exercise. It doesn’t matter whether it’s in the morning before breakfast, during lunch hour or while
watching the evening news. What’s more important is that it’s a time that allows you to keep a schedule, and a
time when you won’t be interrupted. To be successful with your fitness program, you have to make it a priority in
your life. So decide on a time, pull out your day planner and pencil in your exercise times for the next month!
HOW LONG? (Duration of Workouts)
BEFORE
YOU BEGIN
For aerobic exercise benefits, it’s recommended that you exercise from between 24 and 60 minutes per
session. But start slowly and gradually increase your exercise times. If you’ve been sedentary during the past
year, it may be a good idea to keep your exercise times to as little as five minutes initially. Your body will need
time to adjust to the new activity. If your goal is weight loss, a longer exercise session at lower intensities has
been found to be most effective. A workout time of 48 minutes or more is recommended for best weight loss
results.
TREADMILL
OPERATION
HOW HARD? (Intensity of Workouts)
CONDITIONING
GUIDELINES
How hard you workout is also determined by your goals. If you use your treadmill to prepare for a 5K run, you
will probably work out at a higher intensity than if your goal is general fitness. Regardless of your long term
goals, always begin an exercise program at low intensity. Aerobic exercise does not have to be painful to be
beneficial! There are two ways to measure your exercise intensity. The first is by monitoring your heart rate (using
the grip pulse handlebars), and the second is by evaluating your perceived exertion level (this is simpler than
it sounds!).
PERCEIVED EXERTION LEVEL
TROUBLESHOOTING
& MAINTENANCE
A simple way to gauge your exercise intensity is to evaluate your perceived exertion level. While exercising, if you
are too winded to maintain a conversation without gasping, you are working out too hard. A good rule of thumb
is to work to the point of exhilaration, not exhaustion. If you cannot catch your breath, it’s time to slow down.
Always be aware of these warning signs of overexertion.
LIMITED
WARRANTY
20
INTRODUCTION
IMPORTANT
PRECAUTIONS
TARGET H E A R T R AT E Z O N E C H A R T
0%
12
0
0
AGE
14
6
14
3
T A 139 1
35
R
11
7
G E 131
11
4
T
11
1
10
8
12
8
12
4
12
Z
0
O
10
5
NE
10
2
9
9
20
25
30
35
40
45
50
BEFORE
YOU BEGIN
%
15
55
97
60
11
6
TREADMILL
OPERATION
60
%
93
65
CONDITIONING
GUIDELINES
75
EXAMPLE:
TROUBLESHOOTING
& MAINTENANCE
For a 42-year-old user: Find age along the bottom of the chart (round to 40), follow age column up to
the target zone bar. Results: 60% of maximum Hear Rate = 108 Beats Per Minute, 75% of maximum
Heart Rate = 135 Beat Per Minute.
ALWAYS CONSULT YOUR PHYSICIAN BEFORE BEGINNING AN EXERCISE PROGRAM.
21
LIMITED
WARRANTY
10
BEATS PER MINUTE
Target Heart Rate Zone tells you
the number of times per minute
your heart needs to beat to
achieve a desired workout effect.
It is represented as a percentage
of the maximum number of times
your heart can beat per minute.
Target Zone will vary for each
individual, depending on age,
current level of conditioning,
and personal fitness goals. The
American Heart Association
recommends working-out at a
Target Heart Rate Zone of between
60% and 75% of your maximum
heart rate. A beginner will want to
workout in the 60% range while
a more experienced exerciser will
want to workout in the 70-75%
range. See chart for reference.
ASSEMBLY
What is Target Heart Rate Zone?
INTRODUCTION
STRETCHING
IMPORTANT
PRECAUTIONS
STRETCH FIRST
Before using your product, it is best to take a few minutes to do a few gentle stretching exercises. Stretching
prior to exercise will improve flexibility and reduce chances of exercise related injury. Ease into each of these
stretches with a slow gentle motion. Do not stretch to the point of pain. Make sure not to bounce while doing
these stretches.
ASSEMBLY
1. STANDING CALVE MUSCLE STRETCH
BEFORE
YOU BEGIN
Stand near a wall with the toes of your left foot about 18" from the wall, and
the right foot about 12" behind the other foot. Lean forward, pushing against
the wall with your palms. Keep your heels flat and hold this position for a
count of 15 seconds. Make sure that you do not bounce while stretching.
Repeat on the other side.
2. STANDING QUADRICEPS STRETCH
TREADMILL
OPERATION
Using a wall to provide balance, grasp your left ankle
with your left hand and hold your foot against the back
of your thigh for 15 seconds. Repeat with your right
ankle and hand.
CONDITIONING
GUIDELINES
3. SITTING HAMSTRING & LOWER BACK MUSCLE STRETCH
TROUBLESHOOTING
& MAINTENANCE
Sit on the floor with your legs together and straight out in front of you. Do
not lock your knees. Extend your fingers towards your toes and hold for a
count of 15 seconds. Make sure that you do not bounce while stretching. Sit
upright again. Repeat one time.
LIMITED
WARRANTY
22
INTRODUCTION
T IP S
THE IMPORTANCE OF WARM UP & COOL DOWN
IMPORTANT
PRECAUTIONS
WARM UP
The first 2 to 5 minutes of a workout should be devoted to warming up. The warm-up will limber your
muscles and prepare them for more strenuous exercise. Make sure that you warm-up on your product at a
slow pace. The warm up should gradually bring your heart rate into your Target Heart Rate Zone.
COOL DOWN
BEFORE
YOU BEGIN
ACHIEVING YOUR FITNESS GOALS
An important step in developing a long term fitness program is to determine your goals. Is your primary
goal for exercising to lose weight? Improve muscle? Reduce stress? Prepare for the spring racing schedule?
Knowing what your goals are will help you develop a more successful exercise program. Below are some
common exercise goals:
TREADMILL
OPERATION
• Weight Loss - lower intensity, longer duration workouts
• Improve Body Shape and Tone - interval workouts, alternate between hi and low intensities
• Increased Energy Level - more frequent daily workouts
• Improved Sports Performance - high intensity workouts
• Improved Cardiovascular Endurance - moderate intensity, longer duration workouts
CONDITIONING
GUIDELINES
If possible try to define your personal goals in precise, measurable terms, and then put your goals in writing.
The more specific you can be, the easier it will be to track your progress. If your goals are long term, divide
them up into monthly and weekly segments. Longer term goals can lose some of the immediate motivation
benefits. Short term goals are easier to achieve. Your console provides you with several readouts that can
be used to record your progress. You can track Distance, Calories or Time.
TROUBLESHOOTING
& MAINTENANCE
KEEPING AN EXERCISE DIARY
To make your personal exercise log book, photocopy the weekly and monthly log sheets, which are located
on the following pages, or you can print them off of your computer by going to:
www.horizonfitness.com/guides/weeklylog.pdf
www.horizonfitness.com/guides/monthlylog.pdf
As your fitness improves, you can look back and see how far you’ve come!
23
LIMITED
WARRANTY
T IP S
ASSEMBLY
Never stop exercising suddenly! A cool-down period of 3-5 minutes allows your heart to readjust to the
decreased demand. Make sure that your cool down period consists of a very slow pace to allow your heart
rate to lower. After the cool-down, repeat the stretching exercises listed above to loosen and relax your
muscles.
INTRODUCTION
W E E K LY L O G S H EETS
IMPORTANT
PRECAUTIONS
WEEK #
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
COMMENT S
S U N D AY
M O N D AY
T U E S D AY
W E D N E S D AY
T H U R S D AY
ASSEMBLY
F R I D AY
S AT U R D AY
W E E K LY T O TA L S :
BEFORE
YOU BEGIN
WEEK #
D AY
WEEKLY GOAL
DATE
DISTANCE
CALORIES
TIME
COMMENT S
S U N D AY
M O N D AY
T U E S D AY
TREADMILL
OPERATION
W E D N E S D AY
T H U R S D AY
F R I D AY
S AT U R D AY
W E E K LY T O TA L S :
CONDITIONING
GUIDELINES
WEEK #
D AY
WEEKLY GOAL
DATE
TROUBLESHOOTING
& MAINTENANCE
S U N D AY
M O N D AY
T U E S D AY
W E D N E S D AY
T H U R S D AY
F R I D AY
S AT U R D AY
LIMITED
WARRANTY
W E E K LY T O TA L S :
24
DISTANCE
CALORIES
TIME
COMMENT S
INTRODUCTION
D AY
W EEKLY GOAL
DATE
DISTANCE
CAL OR IE S
T IM E
IMPORTANT
PRECAUTIONS
WE E K #
CO MM EN TS
SUN D AY
MON D AY
TUE S D AY
WED N E S D AY
ASSEMBLY
THU R S D AY
FRI D AY
SAT U R D AY
WE E K #
D AY
BEFORE
YOU BEGIN
WE E K LY T O TA L S :
W EEKLY GOAL
DATE
DISTANCE
CAL OR IE S
T IM E
CO MM EN TS
SUN D AY
MON D AY
TREADMILL
OPERATION
TUE S D AY
WED N E S D AY
THU R S D AY
FRI D AY
SAT U R D AY
WE E K #
D AY
CONDITIONING
GUIDELINES
WE E K LY T O TA L S :
W EEKLY GOAL
DATE
DISTANCE
CAL OR IE S
T IM E
CO MM EN TS
TROUBLESHOOTING
& MAINTENANCE
SUN D AY
MON D AY
TUE S D AY
WED N E S D AY
THU R S D AY
FRI D AY
WE E K LY T O TA L S :
25
LIMITED
WARRANTY
SAT U R D AY
INTRODUCTION
M O N T H LY L O G SHEETS
IMPORTANT
PRECAUTIONS
MONTH
WEEK #
ASSEMBLY
D I STANCE
MONTHLY GOAL
CALORIES
TIME
D I STANCE
MONTHLY GOAL
CALORIES
TIME
D I STANCE
MONTHLY GOAL
CALORIES
TIME
M O N T H LY T O TA L S :
BEFORE
YOU BEGIN
MONTH
WEEK #
TREADMILL
OPERATION
M O N T H LY T O TA L S :
CONDITIONING
GUIDELINES
MONTH
WEEK #
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
M O N T H LY T O TA L S :
26
INTRODUCTION
TR O U B L E S H O O T I N G
IMPORTANT
PRECAUTIONS
COMMON PRODUCT QUESTIONS
ARE THE SOUNDS MY TREADMILL MAKES NORMAL?
All treadmills make a certain type of thumping noise due to the belt riding over the rollers, especially new
treadmills. This noise will diminish over time, although may not totally go away. Over time, the belt will stretch,
causing the belt to ride smoother over the rollers.
WHY IS THE TREADMILL I PURCHASED LOUDER THAN THE ONE AT THE STORE?
ASSEMBLY
All fitness products seem quieter in a large store showroom because there is generally more background noise
than in your home. Also, there will be less reverberation on a carpeted concrete floor than on a wood overlay floor.
Sometimes a heavy rubber mat will help reduce reverberation through the floor. If a fitness product is placed
close to a wall, there will be more reflected noise.
WHEN SHOULD I BE WORRIED ABOUT A NOISE?
As long as the sounds your treadmill makes are no louder than a normal conversational tone of voice, it is
considered normal noise.
BEFORE
YOU BEGIN
TROUBLESHOOTING - TREADMILL
Your treadmill is designed to be reliable and easy to use. However, if you experience a problem, please reference the
troubleshooting guide listed below.
PROBLEM:
TREADMILL
OPERATION
L IF T
The banding straps were
removed before ASSEMBLY STEP 1 was
complete and the machine has sprung
open and cannot be assembled.
SOLUTION: The air shocks have been engaged prematurely. To correct this, tilt the machine on it’s nose by lifting
the deck (light end) upwards. Step on the foot latch and fold down the deck so that it is horizontal. You may now
proceed with ASSEMBLY STEP 1.
CONDITIONING
GUIDELINES
PROBLEM: The console does not light up.
SOLUTION: Verify the following:
27
LIMITED
WARRANTY
TROUBLESHOOTING
& MAINTENANCE
DOES THE RED LIGHT ON THE ON/OFF SWITCH LIGHT UP?
IF YES:
• Double check that all connections are secure, especially the console cable. Unplug and reconnect the console
cable to verify.
• Make sure the console cable is not pinched or damaged in any way.
• Turn the power off and wait 60 seconds. Remove motor cover. Wait until all red LED lights have gone off on the
motor control board before proceeding. Next, verify that no wires are loose or disconnected.
IF NO:
• Verify that the outlet the machine is plugged into is functional. Double check that the breaker has not tripped,
it is on a dedicated 20-amp circuit, it is not on a GFCI-equipped outlet, and it is not plugged into a surge
protector or extension cord.
• The power cord is not pinched or damaged and is properly plugged into the outlet AND the machine.
• The power switch is turned to the ON position.
INTRODUCTION
PROBLEM: The treadmill circuit breaker trips during a workout.
SOLUTION: Verify the following:
IMPORTANT
PRECAUTIONS
• Make sure the treadmill is plugged into a dedicated 20-amp circuit.
• Verify that you do not have the machine on an extension cord or surge protector.
• Confirm that the machine is not plugged into a GFCI-equipped outlet or on a circuit that has a GFCI-equipped
outlet on it.
PROBLEM: The treadmill shuts off when elevating.
SOLUTION: Verify the following:
ASSEMBLY
• Make sure there is enough slack in the power cord to reach to the wall during elevation
• Verify that the console cable is not pinched between the handlebars and console mast.
• Turn the power off and wait 60 seconds. Remove motor cover. Wait until all red LED lights have gone off on the motor
control board before proceeding. Next, verify that no wires are loose or disconnected.
PROBLEM: The running belt does not stay centered during a workout.
SOLUTION: Verify the following:
• Make sure the treadmill is on a level surface.
• Verify that the belt is properly tightened and centered (Refer to the Adjustment section for detailed directions).
BEFORE
YOU BEGIN
TROUBLESHOOTING - HEART RATE
Check your exercise environment for sources of interference such as fluorescent lights, computers, underground fencing,
home security systems or appliances containing large motors. These items may cause erratic heart rate readouts.
TREADMILL
OPERATION
You may experience an erratic readout under the following conditions:
• Gripping the heart rate handlebars too tight. Try to maintain moderate pressure while holding onto the heart rate
handlebars.
• Constant movement and vibration due to constantly holding the heart rate handlebars while exercising. If you are
receiving erratic heart rate readouts, try to only hold the grips long enough to monitor your heart rate.
• When you are breathing heavily during a workout.
• When your hands are constricted by wearing a ring.
• When your hands are dry or cold. Try to moisten your palms by rubbing them together to warm.
• Anyone with heavy arrhythmia.
• Anyone with arteriosclerosis or peripheral circulation disorder.
• Anyone whose skin on the measuring palm is especially thick.
CONDITIONING
GUIDELINES
If the above troubleshooting section does not remedy the problem, discontinue use and turn the power off.
PLEASE CALL CUSTOMER TECH SUPPORT AT THE NUMBER ON THE BACK PANEL.
TROUBLESHOOTING
& MAINTENANCE
The following information may be asked of you when you call. Please have these items readily available:
• Model Name
• Serial Number
• Date of Purchase (receipt or credit card statement)
LIMITED
WARRANTY
In order for Customer Tech Support to service your treadmill they may need to ask detailed questions about the symptoms
that are occurring. Some troubleshooting questions that may be asked are:
• How long has this problem been occurring?
• Does this problem occur with every use? With every user?
• If you are hearing a noise, does it come from the front or the back? What kind of noise is it (thumping, grinding,
squeaking, chirping etc.)?
• Has the machine been lubricated and maintained per the maintenance schedule?
Answering these and other questions will give the technicians the ability to send proper replacement parts and the service
necessary to get you and your Horizon Fitness treadmill running again!
28
INTRODUCTION
MAINTENANCE
IMPORTANT
PRECAUTIONS
Cleanliness of your treadmill and its operation environment will keep maintenance problems and service
calls to a minimum. For this reason, we recommend that the following preventive maintenance schedule
be followed.
AFTER EACH USE (DAILY)
BEFORE
YOU BEGIN
ASSEMBLY
Clean and inspect, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Wipe down the running belt, deck, motor cover, and console casing with a damp cloth. Never use
solvents, as they can cause damage to the treadmill.
• Inspect the power cord. If the power cord is damaged, contact Horizon Fitness.
• Make sure the power cord is not underneath the treadmill or in any other area where it can become
pinched or cut.
• Check the tension and alignment of the running belt. Make sure that the treadmill belt will not damage
any other components on the treadmill by being misaligned.
EVERY WEEK
TREADMILL
OPERATION
Clean underneath the treadmill, following these steps:
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Fold the treadmill into the upright position, making sure that the lock latch is secure.
• Move the treadmill to a remote location.
• Wipe or vacuum any dust particles or other objects that may have accumulated underneath the treadmill.
• Return the treadmill to its previous position.
EVERY MONTH - IMPORTANT!
CONDITIONING
GUIDELINES
Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
Inspect all assembly bolts of the machine for proper tightness.
Turn off the treadmill and wait 60 seconds.
Remove the motor cover. Wait until ALL LED lights turn off.
Clean the motor and lower board area to eliminate any lint or dust particles that may have accumulated.
Failure to do so may result in premature failure of key electrical components.
EVERY 6 MONTHS
TROUBLESHOOTING
& MAINTENANCE
It may be necessary to lubricate your treadmill running deck every six months to maintain optimal
performance of your treadmill. Only use lubricant provided by Horizon Fitness! Please contact Horizon
Fitness with questions about applying lubricant to your treadmill.
• Turn off the treadmill with the on/off switch, then unplug the power cord at the wall outlet.
• Loosen both the rear roller bolts. (For best results, place two removable marks on both sides of the
frame and note roller position). Once the belt is loosened, take the bottle of lubricant and apply it to the
entire top surface of the running deck. Tighten both rear roller bolts (matching up the marks for proper
position) to original position. After you have applied lubricant, plug in the power cord, insert the safety
key, start the treadmill and walk on the belt for two minutes to spread the lubricant.
• Lubricate the air shocks with teflon based spray.
29
LIMITED
WARRANTY
•
•
•
•
•
INTRODUCTION
L I M I T E D H O ME-USE WARRANTY
FRAME • LIFETIME
Horizon Fitness warrants the frame against defects in workmanship and materials for the lifetime of the original owner.
IMPORTANT
PRECAUTIONS
DRIVE MOTOR/ELEVATION • 10 YEARS
Horizon Fitness warrants the drive/elevation motors against defects in workmanship and materials for a period of ten years from the date
of purchase, so long as the device remains in the possession of the original owner.
ELECTRONICS & PARTS • 1 YEAR
Horizon Fitness warrants the electronic components and all original parts for a period of one year from the date of original purchase,
so long as the device remains in the possession of the original owner.
ASSEMBLY
LABOR • 90 DAYS
Horizon Fitness shall cover the labor cost for the repair of the device for a period of 90 days from the date of the original purchase, so
long as the device remains in the possession of the original owner.
EXCLUSIONS AND LIMITATIONS
BEFORE
YOU BEGIN
Who IS covered:
• The original owner and is not transferable.
What IS covered:
• Repair or replacement of a defective motor, electronic component, or defective part and is the sole remedy of the warranty.
TREADMILL
OPERATION
What IS NOT covered:
• Normal wear and tear, improper assembly or maintenance, or installation of parts or accessories not originally intended or compatible
with the equipment as sold.
• Damage or failure due to accident, abuse, corrosion, discoloration of paint or plastic, neglect, theft, vandalism, fire, flood, wind, lightning,
freezing, or other natural disasters of any kind, power reduction, fluctuation or failure from whatever cause, unusual atmospheric
conditions, collision, introduction of foreign objects into the covered unit, or modifications that are unauthorized or not recommended by
Horizon Fitness.
• Incidental or consequential damages. Horizon Fitness is not responsible or liable for indirect, special or consequential damages, economic
loss, loss of property, or profits, loss of enjoyment or use, or other consequential damages of whatsoever nature in connection with the
purchase, use, repair or maintenance of the product.
• Equipment used for commercial purposes or any use other than a single family or Household, unless endorsed by Horizon Fitness for
coverage.
• Equipment owner or operated outside the US and Canada.
• Delivery, assembly, installation, setup for original or replacement units or labor or other costs associated with removal or replacement of
the covered unit.
• Any attempt to repair this equipment creates a risk of injury. Horizon Fitness is not responsible or liable for any damage, loss or liability
arising from any personal injury incurred during the course of, or as a result of any repair or attempted repair of your fitness equipment
by other than an authorized service technician. All repairs attempted by you on your fitness equipment are undertaken AT YOUR OWN RISK
and Horizon Fitness shall have no liability for any injury to the person or property arising from such repairs.
CONDITIONING
GUIDELINES
TROUBLESHOOTING
& MAINTENANCE
LIMITED
WARRANTY
30
SERVICE/RETURNS
• In-home service is available within 150 miles of the nearest authorized repair center (Mileage beyond 150 miles from an authorized
service center is the responsibility of the consumer).
• All returns must be pre-authorized by Horizon Fitness.
• Horizon Fitness’ obligation under this warranty is limited to replacing or repairing, at Horizon Fitness’ option, the product at one of its
authorized service centers.
• A Horizon Fitness authorized service center must receive all products for which a warranty claim is made. These products must be received
with all freight and other transportation charges prepaid, accompanied by sufficient proof of purchase.
• Parts and electronic components reconditioned to As New Condition by Horizon Fitness or its vendors may sometimes be supplied as
warranty replacement parts and constitute fulfillment of warranty terms.
• This warranty gives you specific legal rights, and your rights may vary from state to state.
C U S T O MER TECH SUPPORT
If you have any questions or comments, you may contact one of our
trained customer technicians via phone, email or our website.
Customer Tech Support Hotline: 1 - 8 0 0 - 2 4 4 - 4 1 9 2
Email: [email protected]
Website: www.horizonfitness.com
Customer Tech Support hours: Monday - Friday, 8 am - 5 pm CST (excluding holidays)
NOTE: Please read the TROUBLESHOOTING section before contacting Customer Tech Support.
DO NOT return the treadmill to the store.
800 Burton Blvd
DeForest, WI 53532
Tel: 1.800.244.4192
Fax: 608.842.1660
T50, T70. Rev. 1.2 2005 Horizon Fitness Products | Designed & Engineered in the U.S.A. | Made in China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement