Class A Tube Guitar Amps

Class A Tube Guitar Amps
2
Tube Programmable
Guitar Amplifier
6
Classic Tube
Guitar Amplifier
8
Tube Guitar
Amplifier
10
Tube Bass
Amplifier
14
GUITAR
Tube Effect
Pedals
15
AccessoriES
16
TECHNICAl
SPECIFICATIONS
1
GUITARGUITAR
Imperium H 150
Switchable 150W/50W/11W
Guitar Amp Head
•Class AB1 tube amp head
•5 x 12AX7 and 4 x 5881/6L6GC tubes
•3 switchable power outputs: 150W,
50W, 11W, allows for use in concert,
club and rehearsal venues without
compromising tone
•6 custom analog sounds with 127
user selectable & storable presets
accessible from the amps control panel
or via a midi footswitch
•2 sound enhancements: “Classic” and
“Modern”
•4 pre-preamp effect loops
•1 Post-preamp effect loop control,
variable (dry/wet) level control
•Four 9V DC power supply jacks:
eliminates the need for wall wart power
supplies or batteries to power your
effect pedals
Imperium H 50
50W Guitar Amp Head
•Class AB tube amp guitar head,
MOSFET buffered
•4 x 12AX7 tubes
•Power output: 50WRMS @ 8ohms
•6 custom analog sounds with 127
user selectable / programmable &
storable presets accessible from
the amps control panel or via a midi
footswitch
2
•2 pre-preamp effect loops
•1 Post-preamp effect loop with
series/parallel switch
•Slave amp output jack
•Two 9V DC power supply jacks:
eliminates the need for wall wart
power supplies or batteries to power
your effect pedals
LKSDJKDJFK
Programmable
Dfdakljr tijqnTube
gk nrjehtklejlkkjf
Guitar Amps
IMPERIUM combines the advantages of digital technology
with the purest tradition of tube
amplification for electric guitar.
With easy to program settings,
IMPERIUM allows 127 custom
user sounds, which can be memorized and recalled through
a midi pedal board. The digital
encoding pots and push buttons of the user friendly control board light up automatical-
ly when you set your sounds.
namic rhythms, light distor6 pre-installed analog sounds
tion
are provided as a base to pro- •Lead 1: solo overdrive: high
gram your own user sounds.
gain: rock, hard sounds
•Lead 2: heavy rock overdrive:
•Clean 1: Pristine Clean: grehigh sustain solo, shredding
at for arpeggios
•Clean 2: funky rhythms, The digital interface controls
Nashville country sounds
allow the combination of soun•Sexy: slight distortion: pop, ds, EQ (tone) settings, volublues overdrive sounds
me, effects and power output
•Crunch: rock overdrive: dy- that can be easily stored as
Imperium H 150
Imperium 412
midi presets. The IMPERIUM
amps are equipped with TRUE
bypass effect loops to allow
connection of external effect
pedals, and are selectable
from the front panel of the amp
and can be directly assignable
as a preset. The “pre-preamp”
mode indicates the effect is inserted between the guitar and
the preamp circuitry.
Imperium H 50
Imperium 212
3
GUITAR
Imperium 412
Speaker Cabinet
•13 ply Poplar plywood cabinet with
black tolex covering with removable
back panel: allows for closed or
open use
•Internal bracing of the cabinet
prevents rattles and undesired
resonance
•4 x 12” JENSEN neodymium magnet
woofers, Cicognani custom voiced
•Mono power handling: 400W/16ohm
•Stereo power handling: 200W+
200W/8ohm
•Equipped with
attachment for
the “Smart
Mike”
adjustable
microphone
stand
Imperium 212
Speaker Cabinet
•13 ply Poplar plywood cabinet with
black tolex covering, with removable
back panel allows closed or open
playing use
•Internal bracing of the cabinet
prevents rattles and undesired
resonance
•2 x 12” JENSEN neodymium magnet
woofers, Cicognani custom voiced
•Mono power handling: 200W @
8ohms
•Stereo power handling: 100W+100W
@ 16ohms
•Equipped with attachment for the
“Smart Mike”
adjustable
microphone
stand
Imperium C 50
Combo Guitar Amp
•Class AB tube Combo guitar amp
•4 x 12AX7 tubes
•1 x 12” JENSEN neodymium magnet
woofer, custom voiced in a closed
cabinet
•Power output: 50WRMS @ 8ohms
•6 custom analog sounds with 127
user selectable & storable presets
accessible from the amps control
4
panel or via a midi footswitch
•2 pre-preamp effect loops
•Post-preamp effect loops with series/
parallel switch
•Slave amp output jack
•Two 9V DC power supply jacks:
eliminates the need for wall wart
power supplies or batteries to power
your effect pedals
Programmable Tube Guitar Amps
Imperium C 50
5
GUITAR
Dragon Club
Class A Combo Guitar Amp
•Class A tube circuitry combo guitar
amp
•3 x 12AX7 and 2 x 5881 tubes
•1 x 12” JENSEN custom ceramic
magnet woofer
•Power output: 30W RMS
•2 channels: Clean, Overdrive
•Post -preamp effect loops with
series/parallel switch
•Built-in effects: Reverb, Tremolo
•Bass, Middle, Treble EQ + Bright
switch
•2 footswitch inputs: channel
selection and effects on/off
Dragon Studio
Class A Combo Guitar Amp
•Class A tube circuitry combo guitar
amp
•1 x 12AX7 and 1 x EL84 tubes
•1 x 12” JENSEN custom ceramic
magnet woofer
•Power output: 5W RMS
•2 channels: Clean, Soft Overdrive
•Post -preamp effect loop in series
with FET buffer
•Bass, Middle, Treble EQ + Bright
switch
•Headphone Output jack
•1 footswitch input for channel
switching
6V6 Amp Jazz & Blues
Combo Guitar Amp
•Class AB Combo tube amp for guitar
•3 x 12AX7 and 2 x 6V6 tubes
•2 x 10” JENSEN ALNICO Magnet
vintage woofers for “Classic” sound
reproduction
•Power output: 20WRMS with factory
set tubes. 30W, with user switchable
5881 tubes
6
•Single channel with boost switch
•Post -preamp effect loop with series/
parallel switch
•Bass, Middle, Treble EQ + Presence
•Footswitch input jack for BOOST
and EFFECT BYPASS
Classic Tube Guitar Amps
The DRAGON Series features
Class A amp circuitry with classic tube sound voicing. Our
custom wound output transformer guarantees both crystal
clear and pure warm sounds
that are rich in harmonics. The
DRAGON Series was especially developed for those who play
in the blues, pop, country and
rock genres and who are looking
for a lightweight compact sized
amp, without sacrificing the tone, •Post-preamp effect loop
attack, and harmonics.
The Dragon Combo amps are
•Channels: Clean, Overdrive compact and easily transpor•EQ: Bass-Middle-Treble and ted. Designed and Manufactured in Italy.
Presence
Dragon Club
6V6 Amp Jazz & Blues
Dragon Studio
7
GUITAR
Brutus Live
•Class A (single ended) tube guitar
amp head •4 x 12AX7 and 2 x 5881 tubes; auto
biasing circuitry
•28WRMS power output
•2 channels, 5 sounds: Clean, Sexy,
Crunch, Lead 1, Lead 2
•Post -preamp effect loop with series/
parallel switch
•Bass, Middle, Treble EQ
•3 presence frequencies (LF, MF, HF)
with adj. boost/cut in the preamp stage
•¼” (6.3mm) Slave amp output jack
•¼” (6.3mm) Footswitch jack for
channel switching
Brutus
•Class A (single ended) tube guitar
amp head •4 x 12AX7 and 1 x 5881 tubes;
autobias circuitry
•11WRMS power output
•2 channels, 5 sounds: Clean, Sexy,
Crunch, Lead 1, Lead 2
•Post-preamp effect loop in series
•Bass, Middle, Treble EQ
•3 presence frequencies (LF, MF, HF)
with adj. boost/cut in the preamp
stage
•¼” (6.3mm) Slave amp output jack
•¼” (6.3mm) Footswitch jack for
channel switching
Brutus CAB 212 DP
•13 ply Poplar plywood cabinet with
black tolex covering
•Internal bracing of the cabinet
prevents rattles and undesired
resonance
•2 x 12” JENSEN ceramic magnet
woofers, Cicognani custom voiced
•Mono power handling: 200W @
8ohms
•Stereo power: 100W+100W @
16ohms
•See-thru front steel grille enables
perfect microphone positioning
•Cabinet design allows for Horizontal
and Vertical positioning
•Cabinet equipped with attachment
for “Smart Mike” adjustable
microphone stand
Brutus CAB 112 SP
•13 ply Poplar plywood cabinet with
durable black tolex covering
• Internal bracing of the cabinet
prevents undesired resonance
•1 x 12” JENSEN ceramic magnet
woofer, Cicognani custom voiced
• Power handling: 100W @ 8ohms
8
•See -thru front steel grille enables
perfect microphone positioning
•Cabinet design allows for Horizontal
and Vertical positioning
•Cabinet equipped with attachment
for “Smart Mike” adjustable
microphone stand Class A Tube Guitar Amps
The Brutus Series Guitar amplifiers were developed in collaboration with Italian guitarist
virtuoso, Donato Begotti.
The BRUTUS Series amps feature Class A all-tube circuitry
designed to provide superb
balanced sounds, rich in harmonics and exciting dynamics. The BRUTUS, Brutus LIVE
amp heads, the Brutus 112SP
and Brutus 212DP speaker
cabs are compact and easy to
transport, making them ideal
for all guitarists for rehearsal,
recording studio and stage
performance. The tube driven
effect loop ensures optimum
interfacing with all external
effects: analog or digital. The
unique sound of the BRUTUS
Series amps is reminiscent of
famous classic amps of the
60s, but with a modern touch
to also produce the new sound
of today’s music.
•2 channels, 5 sounds Channel 1: Clean, Sexy, Crunch.
Channel 2: Lead 1, Lead 2
•Bass, Middle, Treble EQ,
plus 3 presence frequencies
(LF, MF, HF) with adj. boost/
cut in the preamp stage
•Post -preamp effect loop
•Automatic Tube biasing for:
5881, 6L6GC, EL34, 6CA7,
KT66, KT88, 6550. The
choice of tube replacement
allows for personal sound
customization
•Individual 4ohm, 8ohm,
16ohms ¼” (6.3mm) speaker
output jacks: makes for easy
and correct ohms impedance
to match the amp to the speaker cabs
Brutus Live
Brutus
Brutus CAB 212 DP
Brutus CAB 112 SP
9
BASS
Indy Bass Amp 800H
Bass Guitar Amp
•Class A tube preamp with Class D
power amp
•Class A preamp with 3 x 12AX7
tubes
•800WRMS Class D amp
•2 independent channels: each with
Bass, Middle, Treble EQ, Bass &
Treble boost switches and tube
compressor
•2 Switchable Input channels. 2 users
modes: Dual Channel and Dual Bass
•D.I. out with Lo-z balanced audio
transformer, pre/post EQ selectable
•¼” (6.3mm) dedicated tuner out jack
•Capability to store and recall midi
presets via a Midi footswitch
Indy Bass Preamp
Bass Preamp
•Class A Bass Guitar Preamp
•3 x 12AX7 tubes
•2 independent channels: each with
Bass, Middle, Treble EQ, Bass &
Treble boost switches and tube
compressor
• 2 channels, 2 inputs and 2 users
modes: Dual Channel and Dual Bass
•D.I. out with Lo-z balanced audio
transformer, pre/post EQ selectable
•¼” (6.3mm) dedicated tuner out jack
•Capability to store & recall midi
presets via Midi footswitch
•Balanced mono XLR preamp out &
¼”(6.3mm) unbalanced jack
Indy Bass Amp 400H
Bass Guitar Amp Head
•Hybrid Design: Class A tube preamp
with Class D power amp
•Class A preamp with 2 x 12AX7
tubes
•400WRMS Class D power amp
•Single channel with Bass, Middle,
Treble EQ and Tube Compressor
•9-band graphic EQ equalizer at the
preamp out
•Effect loop in series with True
Bypass
•D.I. out with Lo-z balanced audio
transformer, pre/post EQ selectable
•Compressor and EQ on/off
controllable via footswitch pedal
Indy 210
Bass Guitar Cabinet
•13 ply poplar plywood Bass Guitar
Cabinet in bass-reflex design, tough
carpet covered
•Internal bracing of the cabinet
prevents undesired resonance
•2 x 10” B&C custom neodymium
magnet woofers
•1 x 1” HF compression driver with
level control
•Power handling 500W @ 4ohms
(1200W peak)
•Compact dimensions and light
weight for easy transport
Indy 115
Bass Guitar Cabinet
•13 ply poplar plywood Bass Guitar
Cabinet in bass-reflex design, tough
carpet covered
•Internal bracing of the cabinet
prevents undesired resonance
•1 x 15” B&C custom neodymium
10
magnet woofer
•1 x 1” HF compression driver with
level control
•400W @ 4ohms (1200W peak)
power handling
•“Classic” Tone: round and well
balanced sound
Series Bass Guitar Amps
The INDY Series Bass Guitar
Amps feature Hybrid Circuitry Design, combining a Class
A tube preamp with a Class D
power amp. This hybrid technology succeeds in amalgamating
a tube type bass amp with high
power output, while reducing the
amps weight by eliminating he-
Indy Bass
Amp 800H
avy weight transformers in the
power amp stage without sacrificing the amps tone.
The built-in tube type compressor that’s featured in all models
guarantees touch-controlled dynamics and remarkable sustain
when desired. The intuitive control panel features a 3 band EQ
switch controllable presets
(Bass, Middle, Treble) and bass
and treble boost switches to •EQ section: Bass-MiddleTreble, treble boost switch,
provide the electric bassist with
bass boost switch
maximum tone variation and
•Built in Tube type Comprespersonalization.
sor circuitry
•Mono or multi channel ope- •Post -preamp effect loop
ration, user programmable •D.I. out with custom wound
audio transformer for Lo-z
Midi presets & midi footbalanced connection to mixer/recording without sacrificing tone
Indy 210
Indy Bass
Amp 400H
Indy 210
Indy 115
11
BASS
Indy Bass Amp 420C
Combo Bass Guitar Amp
•Hybrid Design: Class A tube preamp
with Class D power amp
•Class A preamp with 2 x 12AX7
tubes
•400WRMS Class D power amp
•2 x 10” JENSEN custom ceramic
magnet woofers & 1 x 1” HF
compression driver
•13 ply poplar plywood cabinet
•Single channel with Bass, Middle,
Treble EQ and Tube Compressor
•Effect loop in series configuration
•D.I. out with Lo-z balanced audio
transformer, pre/post EQ selectable
•Compressor on/off controllable via
footswitch pedal
Indy Bass Amp 415C
Combo Bass Guitar Amp
•Hybrid Design: Class A tube preamp
with Class D power amp
•Class A preamp with 2 x 12AX7
tubes
•400WRMS Class D power amp
•1 x 15” JENSEN custom ceramic
magnet woofer & 1 x 1” HF
compression driver
•13 ply poplar plywood cabinet
•Single channel with Bass, Middle,
Treble EQ and Tube Compressor
•Effect loop in series configuration
•D.I. out with Lo-z balanced audio
transformer, pre/post EQ selectable
•Compressor and EQ on/off
controllable via footswitch pedal
Indy Studio
•Hybrid Design: Class A tube preamp
with Class G power amp
•Class A preamp with 2 x 12AX7
tubes
•150WRMS Class G power amp
•1 x 10” JENSEN custom ceramic
woofer
•1 x 1” HF driver
12
•Single channel with Bass, Middle,
Treble EQ and Tube Compressor
•Effect loop in series with FET buffer
•Post preamp D.I. out with Lo-z
balanced audio transformer
•Compact dimensions and light
weight for easy transportation
Series Bass Guitar Amps
Indy Bass
Amp 420C
Indy Bass
Amp 415C
Indy Studio
13
GUITAR
Tube Driven Effect Pedals
The DRAGON Series Overdrive and
Distortion Effect Pedals feature Class
A circuitry design to deliver high quality
tube sound that cannot be duplicated
by solid state (transistor) type effect
pedals. Ideal for use in pop, hard rock,
shredding and blues music, the Dragon Series pedals offer an original cir-
cuitry design to provide unsurpassed
tone enhancement along with a robust
stainless steel chassis to provide years of use. The TRUE BYPASS relay
circuitry eliminates tone and signal
loss to your amp when the effects are
switched off.
Dragon Distortion
•Class A Tube Circuitry Designed
Distortion Effect Pedal
•2 x 12AX7A tubes
•Gain, Tone, Volume Controls
•TRUE BYPASS circuitry
•LED on indicator
•Low noise 12V DC / 350mA power
supply
Dragon Overdrive
•Class A Tube Circuitry Designed
Overdrive Effect Pedal
•2 x 12AX7A tubes
•Gain, Tone, Volume Controls
14
•TRUE BYPASS circuitry
•LED on indicator
•Low noise 12V DC / 350mA power
supply
ACCESSORIES
Midi pedal boards and accessories
to enhance your performances
Cicognani offers a range of
useful accessories to enhance and optimize your performances.
Our Midi pedal boards are
especially designed to be
used with our Imperium Series Guitar Amps, the INDY
800H Bass Guitar amplifier
and the Indy Bass Guitar
Preamp to allow you to control your customized presets
in both live performance and
studio applications. All Cicognani Accessories are manufactured utilizing the highest
quality components to ensure
years of use.
The Midi Footswitch
Midi Pedal Board
•Midi footswitch board with 127
presets
•10 selectable latching type
metal switches with LED on
indicators
•Bank Up/Down latching type
metal switches
•Display with easy to read
numbers for presets
•Dipswitch to select set the midi
transmission channel (1 to 16)
•Quick Recall of the last preset
•Midi slave aux output
•9V-15V DC out @
300mA provides
power for an effect
pedal
•Can be powered by a
9-15V DC 300ma power
supply or by external
phantom power via the
midi slave input with a midi
cable
MF24
Compact Midi Pedal Board
•Compact sized Midi
footswitch board with 24
presets
•4 selectable latching type
metal switches with LED on
indicators
•Bank Up/Down latching type
metal switches
•Display to view the selected
bank
•Quick Recall of the last
preset
•Midi slave aux output
•9V-15V DC out @ 300mA
provides power for an effect
pedal
•Can be powered by a 9-15V
DC 300ma power supply or
by external phantom power
via the midi slave input with
a midi cable
Power Load
•Handles 50 watts musical
power at 8ohms
•Provides a dummy load
allowing use of amp heads
without a speaker cabinet
•Passive filtered recording
line out with microphone
emulation of a 4 x 12”
cabinet equipped with
vintage speakers: for direct
input recording to a mixer or
direct input to a P.A. system
•Variable Record out level
control
•Clipping LED to display
overloaded input signal
Smart Mike
Adjustable Microphone
Boom Stand
•SMART MIKE: adjustable
boom microphone stand for
the Brutus and Imperium
Guitar Speaker Cabinets
•Eliminates the need for a
floor type mic stand and
stage clutter
•SMART MIKE
provides precise
microphone placement
•Attaches easily & quickly
15
GUITAR
GUITAR
Model
H 150
H 50
C 50
6V6 AMP JAZZ & Blues
DRAGON CLUB
Type
Head
Head
Combo
Combo
Combo
Combo
W
11/50/150
50
50
[email protected] with 6V6 tubes
[email protected] with 5881/6L6GC tubes
40W RMS with 5881 tubes
5W RMS with 5881 tubes
AB1
A
A
A
A
A
dB
< 78
< 78
< 78
< 80
< 83
< 85
ohm
< 1M
< 1M
< 1M
Impedance < 1M
Input sensitivity <100m
Impedance < 1M
Input sensitivity <100m
Impedance < 1M
Input sensitivity <100m
5 x 12AX7EH
4 x 5881 WGC
4 x 12AX7WC
4 x 12AX7WC
3 x 12AX7WA + 2
6V6EH o 2 x 5881
3 x 12AX7WA
+ 2 x 5881/6L6GC
1 x 12AX7WC / 1 x EL84
Low ± 10dB 120Hz
Mid ± 8dB 460Hz
High ± 12dB 2400Hz
Low ± 10dB 120Hz
Mid ± 8dB 460Hz
High ± 12dB 2400Hz
Low ± 10dB 120Hz
Mid ± 8dB 460Hz
High ± 12dB 2400Hz
Low 180Hz
Mid 620Hz
High 3000Hz
Low 180Hz
Mid 620Hz
High 2800Hz
Low 180Hz
Mid 620Hz
High 2800Hz - Bright 5000Hz
Send level 1Vpp/imp. 1Mohm
Return level max 1.5Vpp
Send level 1Vpp/imp. 1Mohm
Return level max 1.5Vpp
Send level 1Vpp/imp. 1Mohm
Return level max 1.5Vpp
Output power
Class
Signal to noise ratio
Pre input
Tubes
Tone controls
FX Post Preamp
Series/Parallel with potentiometer
Series/Parallel with selector
Series/Parallel with selector
Send lev. max. 1,5pp Z<100kohm Send lev. max. 1.5pp Z<100kohm Send lev. max. 1.5pp Z<100kohm
Return lev. max. 1.8Vpp Z<100kohm Return lev. max. 1.8Vpp Z<100kohm Return lev. max. 1.8Vpp Z<100kohm
DRAGON STUDIO
FX Pre Preamp
Consecutive serial FX1 to FX4
THRU By pass Relays
Consecutive serial FX1 to FX2
THRU By pass Relays
Consecutive serial FX1 to FX2
THRU By pass Relays
-
-
-
MIDI
Standard omnimode 1-16 CH
Standard omnimode 1-16 CH
Standard omnimode 1-16 CH
-
-
-
MIDI Phantom power
External power supply unit
(not included)
External power supply unit
(not included)
External power supply unit
(not included)
-
-
-
Classic
Presence +1dB a 4500Hz
Sub pass +1dB a 100Hz
-
-
-
-
-
Modern
Presence +4dB a 5800Hz
Sub pass +4dB a 100Hz
-
-
-
-
-
Loudspeakers
-
-
1x12” JENSEN
2x10” JENSEN
1x12” JENSEN
1x12” JENSEN
Frequency response
-
-
-3dB 90Hz - 5.5kHz
110 /230Vac 50-60Hz
110 /230Vac 50-60Hz
110 /230Vac 50-60Hz
110 /230Vac 50-60Hz
110 /230Vac 50-60Hz
220
100
100
100
110
60
kg/Lb
17.5 / 38.6
10.5 / 23.14
18 / 39.68
16 / 35.27
16 / 35.27
12.5 / 27.55
mm
inch
685x240x280
27x9.45x11
560x200x260
22x7.9x10.23
560x485x309
22x19x12
600x480x300
23.62x18.9x11.82
544x470x270
21.41x18.5x10.62
444x424x240
17.5x16.7x9.5
Power supply
VA
Power consumption
Weight
Dimensions (WxHxD)
Transport weight
Transport dimensions (WxHxD)
20 / 44
13 / 28.66
20.5 / 45.19
18 / 39.68
19 / 41.88
14 / 30.86
mm
inch
815x345x400
32x13.58x15.75
670x320x370
26.37x12.6x14.56
600x560x360
23.62x22x14.17
630x550x345
24.80x21.65x13.6
579x485x305
22.8x19x12
498x483x298
19.6x19x11.73
Type
412
212
Cabinet
Cabinet
Configuration
stereo/mono
stereo/mono
Loudspeakers
4x12” JENSEN
2x12” JENSEN
Mono power
400W @ 16ohm
200W @ 8ohm
Stereo power
200+200W @ 8ohm
100+100W @ 16ohm
-3dB 80Hz - 5kHz
-3dB 80Hz - 5kHz
Frequency response
Recommended amplifier
50/200W RMS
25/100W RMS
Input connectors
2xJack ø 6.5mm
2xJack ø 6.5mm
kg/Lb
Dimensions (WxHxD)
mm/inch
Transport weight
Transport dimensions (WxHxD)
25 / 55
18 / 39.68
773x789x362
31.88x33.46x15.75
773x522.5x362
30.43x20.55x14.25
kg/Lb
27.5 / 60.62
20.5 / 45.19
mm
inch
810x850x400
31.88x33.46x15.75
815x590x410
32x23.22x16.14
EFFECTS
Model
Input level
Input impedance
DISTORTION
OVERDRIVE
-18/22dBm
-18/22dBm
1Mohm
1Mohm
Output impedance
Max 100kohm
Max 100kohm
Power supply
12Vdc 350mA
12Vdc 350mA
Signal connectors
Jack ø 6.5mm
Jack ø 6.5mm
Enable relays
THRU by pass
THRU by pass
kg/Lb
Weight
Dimensions (WxHxD)
Transport weight
mm/inch
kg/Lb
Transport dimensions (WxHxD)mm/inch
16
110 /230Vac 50-60Hz
kg/Lb
Model
Weight
-3dB 150Hz a 68kHz @ 20W/8ohm -3dB 150Hz a 65kHz @ 40W/16ohm -3dB 150Hz a 65kHz @ 40W/8ohm
1 / 2.20
1 / 2.20
150x40x190 / 6x1.57x7.5
150x40x190 / 6x1.57x7.5
1.8 / 4
1.8 / 4
330x140x200 / 13x5.50x7.87
330x140x200 / 13x5.50x7.87
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement