MyEVTV URC remote control User guide

The Universal Remote Control (URC) is a device that can be used to control one TV, one AUX device, and a set-top box. The URC can be programmed with device codes for specific TV and AUX devices, or it can automatically search for compatible codes. The URC also includes features such as volume control, channel changing, and menu navigation. To use the URC, you must first select the device you want to control by pressing the corresponding mode key (i.e. "TV", "STB", or "AUX"). The mode key will light up to confirm your selection. You can then use the buttons on the URC to control the selected device.

PDF Download
Document
myEVTV URC User Guide | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • TV/STB/AUX device control
  • Auto device code search
  • Multiple device control
  • Volume control
  • Channel changing
  • Menu navigation

Frequently asked questions

Press the corresponding mode key (i.e. "TV", "STB", or "AUX"). The mode key will light up to confirm your selection.

1. Locate the device code for your desired device in the device code table provided in the Appendix as the end of this guide. 2. Turn on your device and with media inserted (if applicable). 3. On the remote control, press a device mode key for 5 seconds (i.e., "TV" or "AUX"). The device mode key will light up. 4. Enter the four-digit device code for you device. If you perform this procedure correctly, the selected device mode key backlight will blink twice.

1. Turn on your TV or your A/V device. 2. On the remote control, press a device mode key (i.e., "TV" or "AUX") and hold for 5s. The device mode key will light up. 3. Press the "POWER" key once. 4. Aim the remote control at the device. Press either the "CH UP" key or "CH DOWN" key to do device auto-scan. 5) If the device turns off, a working code has been found. Press OK once to lock in the code. The selected mode key will blink twice. 6) If all code sets of that device is exhausted in the search and the OK is not pressed, the selected device key will fast blink 7 times and the search mode will be terminated
Preparing document for printing…
0%