SOLE B94 Upright Cycle Model #16867394

SOLE B94 Upright Cycle Model #16867394
Model : 16867394
OWNERÊS MANUAL
PLEASE CAREFULLY READ THIS ENTIRE MANUAL BEFORE OPERATING
YOUR NEW UPRIGHT!
TABLE OF CONTENTS
Product Registration
3
Important Safety Instructions
4
Important Electrical Information
5
Important Operation Instructions
5
Assembly Instructions
7
Fitness Bike Features
10
Operation of Your New Fitness Bike
11
Programmable Features
14
Using Heart Rate Monitor
19
General Maintenance
21
Exploded View Diagram
22
Parts List
23
Manufacturer's limited warranty
25
ATTENTION
THIS FITNESS BIKE IS INTENDED FOR RESIDENTIAL USE ONLY AND IS
WARRANTED FOR THE APPLICATION. ANY OTHER APPLICATION VOIDS THIS
WARRANTY IN ITS ENTIRETY.
Dyaco Canada Inc. 2013
2
[email protected]
CONGRATULATIONS ON YOUR NEW UPRIGHT AND WELCOME TO THE SOLE FAMILY!
Thank you for your purchase of this quality Sole Upright from Dyaco Canada Inc. Your new
Upright has been manufactured by one of the leading fitness manufacturers in the world and
is backed by one of the most comprehensive warranties available. Dyaco Canada Inc. will do
all we can to make your ownership experience as pleasant as possible for many years to
come.
If you have any questions about your new Sole product or questions about the warranty
contact Dyaco Canada Inc. at 1-888-707-1880.
Please take a moment at this time to record below the name of the dealer, their telephone
number, and the date of purchase for easy contact in the future. We appreciate your
confidence in SOLE and we will always remember that you are the reason that we are in
business. Please complete and mail your registration card today and enjoy your new Upright.
Yours in Health,
Dyaco Canada Inc.
Name of Dealer
Telephone Number of Dealer
Purchase Date
PRODUCT REGISTRATION
RECORD YOUR SERIAL NUMBER
Please record the Serial Number of this fitness product in
the space provided below.
Serial Number
Dyaco Canada Inc. 2013
3
[email protected]
IMPORTANT SAFETY INSTRUCTIONS
WARNING - Read all instructions before using this appliance.
Do not operate fitness bike on deeply padded, plush or shag carpet. Damage
to both carpet and fitness bike may result.
Keep children away from the fitness bike. There are obvious pinch points and
other caution areas that can cause harm.
Keep hands away from all moving parts.
Never operate the fitness bike if it has a damaged cord or plug. If the fitness
bike is not working properly, call your dealer.
Keep the cord away from heated surfaces.
Never drop or insert any object into any openings.
Do not use outdoors.
Do not attempt to use your fitness bike for any purpose other than for the
purpose it is intended.
The hand pulse sensors are not medical devices. Various factors, including the
user’s move- ment, may affect the accuracy of heart rate readings. The pulse
sensors are intended only as exercise aids in determining heart rate trends in
general.
Wear proper shoes. High heels, dress shoes, sandals or bare feet are not
suitable for use on your fitness bike. Quality athletic shoes are recommended
to avoid leg fatigue or injury.
SAVE THESE INSTRUCTIONS - THINK SAFETY!
Dyaco Canada Inc. 2013
4
[email protected]
IMPORTANT ELECTRICAL INSTRUCTIONS
WARNING!
NEVER remove any cover without first disconnecting AC power.
If voltage varies by ten percent (10%) or more, the performance of your fitness bike
may be affected. Such conditions are not covered under your warranty. If you
suspect the voltage is low, contact your local power company or a licensed electrician
for proper testing.
NEVER expose this fitness bike to rain or moisture. This product is NOT designed for
use outdoors, near a pool or spa, or in any other high humidity environment. The
operating tempera- ture specification is 40 to 120 degrees Fahrenheit, and humidity is
95% non-condensing (no water drops forming on surfaces).
IMPORTANT OPERATION INSTRUCTIONS
NEVER operate this fitness bike without reading and completely
understanding the results of any operational change you request from the
computer.
NEVER use your fitness bike during an electrical storm. Surges may occur in
your household power supply that could damage fitness bike components.
Unplug the fitness bike during an electrical storm as a precaution.
Do not use excessive pressure on console control keys. They are precision set
to function properly with little finger pressure. If you feel the buttons are not
functioning properly with normal pressure contact your dealer.
Dyaco Canada Inc. 2013
5
[email protected]
ASSEMBLY PACK CHECKLIST
1
HARDWARE STEP 1
#50. 3/8” x 2-1/4”
Hex Head Bolt (2 pcs)
2
#72. 5/16” x 18mm x 1.5T
Flat Washer (6 pcs)
#99. 5/16” x 19mm x 1.5T
Curved Washer (1 pc)
HARDWARE STEP 3
#51. 5/16” x 5/8”
Hex Head Bolt (2 pcs)
4
#71. 3/8” x 25mm x 2T
Flat Washer (2 pcs)
HARDWARE STEP 2
#51. 5/16” x 5/8”
Hex Head Bolt (7 pcs)
3
#58. M5 x 12mm
Phillips Head Screw
(2 pcs)
#72. 5/16” x 18mm x 1.5T
Flat Washer (2 pcs)
#103. 5/16” x 1.5T
Split Washer (2 pcs)
HARDWARE STEP 4
#58. M5 x 12mm
Phillips Head Screw (6 pcs)
Dyaco Canada Inc. 2013
6
[email protected]
ASSEMBLY TOOLS
#92. 13/15mm Wrench
#93. Phillips Head Screwdriver
#100. 12/14mm Wrench
ASSEMBLY INSTRUCTIONS
PRE-ASSEMBLY
1.
2.
3.
Dyaco Canada Inc. 2013
Using a razor knife (Box Cutter) cut the outside, bottom, edge of box. Lift
Box over the unit and unpack.
Carefully remove all parts from carton and inspect for any damage or
missing parts. If damaged parts are found, or parts are missing, contact
your dealer immediately.
Locate the hardware package. Remove the tools first. Remove the
hardware for each step as needed to avoid confusion. The numbers in the
instructions that are in parenthesis (#) are the item number from the
assembly drawing for reference.
7
[email protected]
1
REAR STABILIZER
HARDWARE STEP 1
#50. 3/8” x 2-1/4”
Hex Head Bolt (2 pcs)
#58. M5 x 12mm Phillips
Head Screw (2 pcs)
#71. 3/8” x 25mm x 2T
Flat Washer (2 pcs)
1. Attach the Rear Stabilizer Cover (41) to the Rear Stabilizer (5)
with twoPhillips Head Screws (58). Tighten with the Phillips
Head Screw Driver (93).
2. Attach the Rear Stabilizer (5) to the Main Frame (1) by sliding
two Flat Washers (71) onto two Hex Head Bolts (50); insert
the bolts through the Rear Stabilizer Attachment Plate
(131), then into the rear stabilizer. Tighten using the 12/14
mm Wrench (100).
2
CONSOLE MAST
HARDWARE STEP 2
#51. 5/16” x 5/8”
Hex Head Bolt (7 pcs)
#72. 5/16” x 18mm x 1.5T
Flat Washer (6 pcs)
#99. 5/16” x 19mm x 1.5T
Curved Washer (1 pc)
1. Unravel the Computer Cable (29) and pull the twist tie wire
through the Console Mast Cover (38) (see illustration for the
correct orientation of the cover)and the Console Mast (2) until
the cable connector comes out the top opening of the Console
Mast.
2. Attach the Console Mast (2) onto the Main Frame (1) with
the seven Hex Head bolts (51). Place six Flat Washers (72)
on the side bolts and one Curved Washer (99) on the front
bolt. Tighten using the 12/14mm Wrench (100).
Dyaco Canada Inc. 2013
8
[email protected]
3
HANDLEBAR
HARDWARE STEP 3
#51. 5/16” x 5/8”
Hex Head Bolt (2 pcs)
#72. 5/16” x 18mm x 1.5T
Flat Washer (2 pcs)
#103. 5/16” x 1.5T
Split Washer (2 pc)
1. Insert the two hand pulse cables (26) through the opening of
the handlebar mounting bracket on the front side of the
console mast tube (2). Pull the cables through the opening of
the console mounting bracket at the rear of the console mast
tube
2. Attach the Handle Bar (3) to the Front Console Mast (2) with
the two Hex Head bolts (51), two Flat Washers (72) and two
Split Washers (103). Tighten using the 12/14mm Wrench
(100). Be careful not to pinch the cables when fastening.
Install part (105) handlebar cover on the handlebar.
4
PLASTIC PARTS
HARDWARE STEP 4
#58. M5 x 12mm Phillips
Head Screw (6 pcs)
1. Insert the Computer Cable (29) and two Hand pulse cables
(26) into the connectors in the back of the Console (34).
2. Attach the Console (34) onto the Console Mast (2) with four
Phillips Head Screws (58). Be careful not to pinch the cables
when fastening.
3. Attach the Front Stabilizer Cover (40) to the Main Frame (1)
with two Phillips Head Screws (58). Tighten with the Phillips
Head Screw Driver (93).
4. Install the Pedals (45 L, 46 R) onto the Cranks by using the
13/15mm Wrench (92). Remember that the left pedal has a
reverse thread and will be screwed into the crank in the
opposite rotation from normal threads. There is an L stamped
into the end of the threaded post of the left pedal and an R on
the end of the right post. Make sure to tighten the pedals as
much as you possibly can. It may be necessary to re-tighten the
pedals if you feel a thumping while pedaling the bike. A clicking
noise or thumping feeling is usually caused by loose pedals.
5. Install the Seat mount slide (7) onto the track on top of the seat
tube with the seat post facing forward. Place the nut plate (8)
onto the seat slide behind the seat post. Place the flat washer
(71) onto the seat adjustment knob (86) and thread it into the
nut plate from underneath the seat tube track. Attach the seat
(19) to the seat post using the 12/14mm Wrench (100).
Dyaco Canada Inc. 2013
9
[email protected]
4
ASSEMBLY STEP 4
FITNESS BIKE FEATURES
FOOT PEDALS
Through research performed with a leading sports scientist and physical rehabilitation
expert, engineering has developed a breakthrough in pedal design. Typical stationary
exercise bikes are wider than a normal road bike. The reason is to allow for the braking
mechanism, pulleys, drive components and plastic covers. Since the bike is wider, so is
the distance between the pedals; this width between the pedals is called the Q factor.
It has designed our pedal system so the Q factor is the smallest in the industry, but we
did not stop there. We have also custom designed and tooled a new pedal that provides a
two degree inward tilt to compensate for the Q factor not being perfect. Having a small Q
factor in addition to the two-degree inward tilt of the pedals puts the user into a
biomechanical neutral alignment. This means that your feet, ankles, knees and hips are
lined up properly ensuring a comfortable workout.
SEAT ADJUSTMENT
You are able to adjust the seat position while seated. Pull up on the lever located in front
of the seat and slide the carriage forward or backwards. The correct position is when
there is a slight bend in your knee when the pedal is at its farthest position forward (3
o’clock position when looking from the right side of the bike). Release the lever and you
are ready to begin.
PEDAL STRAP ADJUSTMENT
Adjust each pedal strap so that they are snug around your feet. You have the option of
adjusting the hole location on one or both sides of the pedal.
Dyaco Canada Inc. 2013
10
[email protected]
OPERATION OF YOUR FITNESS BIKE
GETTING FAMILIAR WITH THE CONTROL PANEL
COOLING FAN
SPEAKER
DATA DISPLAY
DOT MATRIX
(Program Profiles)
PROGRAM
BUTTONS
MESSAGE
WINDOW
(Manual, Hill, Fat
Burn, Cardio,
Strength, Interval, 2
User, 2HR)
(Laps, Speed,
Level, Watts,
Segment Time)
DISPLAY
FAN POWER
SWITCH
CONTROL KEYS
AUDIO
IN JACK
HEADPHONE JACK
(MP3, CD, OR
SMARTPHONE)
POWER UP
When power is connected to the fitness bike the console will automatically power up.
These models operate on 12V/1.5A DC which is supplied by the power pack that is
connected to AC power. There is a power switch located where the line cord plugs into
the unit on the front of the bike .
When it is first powered on, the console will perform an internal self-test. During this time
all the lights will turn on. When the lights go off, the Message Window will show a
software version (i.e.: VER 1.0) and the Distance window will display an odometer
reading. The odometer reading displays how many virtual miles the fitness bike has gone.
The Time window displays how many hours the fitness bike has been used.
The odometer and time will remain displayed for only a few seconds then the console will
go to the start-up display. The dot matrix display will be scrolling through the different
workout profiles and the Message Window will scroll the start-up message. You may
now begin to use the console.
Dyaco Canada Inc. 2013
11
[email protected]
CONSOLE OPERATION
QUICK START
This is the quickest way to start a workout. After the
console powers up you just press the Start key to begin,
this will initiate the Quick Start mode. In Quick Start the
time will count up from zero and the workload/resistance
may be adjusted manually by pressing the Level ▲/▼
buttons. The dot matrix display will be showing a track with
a blinking dot indicating your progress as it travels around
the track.
BASIC INFORMATION
The Message Window will initially display Laps completed. Each time the Display
button is pressed the next set of information will appear. The order of information
displayed will be: Speed, Level, Watts, Segment Time and Data Scan mode. In
Data Scan mode, the displayed information will change every 4 seconds in the
Message Window.
The fitness bike has a built in heart rate monitoring system. Simply grasping the Contact
Heart Rate Sensors on the handle bars or wearing the chest strap transmitter will start
the heart (see Heart Rate Programs) Icon blinking (this may take a few seconds). The
Pulse Window will display your heart rate in beats per minute and the HR bar graph will
show your current % in relation to projected heart rate maximum. The chest strap is a
more accurate and reliable method of heart rate reading. The hand pulse sensors are
subject to false readings depending on user physiology and workout habits including
how one grips the sensors or how sweaty their hands are.
The Stop button actually has several functions. Pressing the
Stop key once during a program will Pause the program for
5 minutes. If you need to get a drink, answer the phone or
any of the many things that could interrupt your workout, this
is a great feature. To resume your workout during Pause just
press the Start key. If the Stop button is pressed twice
during a workout the program will end and a Workout
Summary is displayed.
If the Stop/Reset key is held down for 3 seconds the console will perform a complete
Reset. During data entry for a program the Stop/Reset key performs a Previous Screen
function. This allows you to go back one step in the programming each time you press
the Stop key.
There is an Audio In Jack (
) on the front of the console and built-in speakers. You
may plug any low-level audio source signal into this port. Audio sources include MP3,
iPod, portable radio, CD player or even a TV or computer audio signal. There is also a
Headphone Jack (
)for private listening.
Dyaco Canada Inc. 2013
12
[email protected]
PROGRAMMING THE CONSOLE
Each of the programs can be customized with your personal information and changed
to suit your needs. Some of the information asked for is necessary to ensure the
readouts are correct. You will be asked for your Age and Weight. Entering your Age is
necessary during the Heart Rate control program to ensure the correct settings are
entered in the program; entering your Weight aides in calculating a more correct
Calorie reading. Although we cannot provide an exact calorie count we do want to be
as close as possible.
A message about Calories: Calorie readings on every piece of exercise equipment,
whether it is in a gym or at home, are not accurate and tend to vary widely. They are
meant only as a guide to monitor your progress from workout to workout. The only way to
measure your calorie burn accurately as in a clinical setting connected to a host of
machines. This is because every person is different and burns calories at a different rate.
ENTERING A PROGRAM AND CHANGING SETTINGS
Press each program button to scroll through the program selections. The profile for each
program will be displayed in the dot matrix window. Press the Enter key to select a
program and begin customizing the settings. If you want to workout without entering
new settings, then just press the Start key. This will bypass the programming of data
and take you directly to the start of your workout. If you want to change the personal
settings, then just follow the instructions in the Message Window. If you start a program
without changing the settings, the default settings will be used.
Note: Age and Weight default settings will change when you enter a new number. So
the last Age and Weight entered will be saved as the new default settings. If you enter
Age and Weight the first time you use the fitness bike you will not have to enter it every
time you work out unless either Age or Weight has changed or someone else enters a
different Age and Weight.
Dyaco Canada Inc. 2013
13
[email protected]
PROGRAMMABLE FEATURES
MANUAL PROGRAM
The Manual program works as the name implies, manually. This means that you
control the workload yourself and not the computer.
1.
2.
3.
4.
5.
6.
7.
8.
Press the Manual program button then press the Enter key.
The Message Window will ask you to enter your Age. You may adjust the age
setting using the Level ▲/▼ keys, then press the Enter key to accept the new
number and proceed on to the next screen.
You are now asked to enter your Weight. You may adjust your weight setting
using the Level ▲/▼ keys, then press Enter to continue.
Next is the Time. You may adjust the length of Time by pressing the Level ▲/▼
keys, then press Enter to continue.
Now you are finished editing the settings and can begin your workout by pressing
the Start key. You can also go back and modify your settings by pressing the Stop
key to go back one level of the programming screen.
Once the program starts the fitness bike will be set to level one. This is the easiest
level and it is a good idea to stay at level one for a while to warm up. If you want to
increase the work load at any time press the Level ▲key; the Level ▼ key will
decrease the workload.
During the Manual program you will be able to scroll through the data in the
Message Window by pressing the Display key.
When the program ends the Message Window will show a summary of your
workout. The summary will be displayed for a short time then the console will
return to the start- up display.
Dyaco Canada Inc. 2013
14
[email protected]
PRESET PROGRAMS
The fitness bike has five different programs that have been designed for a variety of
workouts. These five programs have factory preset work level profiles for achieving
different goals.
Hill
The Hill program simulates going up and down a hill. The resistance in the pedals will steadily
increase and then decrease during the program.
WORK
Fat Burn
The Fat Burn program is designed, as the name implies, to maximize the burning of fat. There
are many schools of thought on the best way to burn fat but most experts agree that a lower
exertion level that stays at a steady workload is the best. The absolute best way to burn fat is to
keep your heart rate at around 60% to 70% of its maximum potential. This program does not use
heart rate but simulates a lower, steady exertion workout.
WORK
Cardio
The Cardio program is designed to increase your cardiovascular function and endurance. This is
exercise for your heart and lungs. It will build up your heart muscle and increase blood flow and
lung capacity. This is achieved by incorporating a higher level of exertion with slight fluctuations
in work.
WORK
Strength
The Strength program is designed to increase muscular strength in your lower body. This
program will steadily increase in resistance to a high level and forces you to sustain it. This is
designed to strengthen and tone your legs and glutes (muscles of the butt).
WORK
Interval
The Interval program takes you through high levels of intensity followed by periods of low
intensity. This program increases your endurance by depleting your oxygen level followed by
periods of recovery to replenish oxygen. Your cardiovascular system gets programmed to use
oxygen more efficiently this way. This program also forces your body to become more efficient
due to spikes in heart rate, between recovery periods. This aids in heart rate recovery from
intense activities.
WORK
Dyaco Canada Inc. 2013
15
[email protected]
PROGRAMMING PRESET BUTTONS
1. Press the desired program button then press the Enter key.
2. The Message Window will ask you to enter your Age. You may adjust
the age setting, us- ing the Level / keys, then press the Enter key
to accept the new number and proceed on to the next screen.
3. You are now asked to enter your Weight. You may adjust the weight
number using the Level / keys then press Enter to continue.
4. Next is Time. You may adjust the Time and press Enter to continue.
5. Now you are asked to adjust the Max Level. This is the peak exertion level you will experience
during the program (the highest colored segment/box of the program profile). Adjust the level and
then press Enter.
6. Now you are finished editing the settings and can begin your workout by pressing the Start key.
You can also go back and modify your settings by pressing the Stop key to go back one level, or
screen.
7. During the program you will be able to scroll through the data in the Message Window by
pressing the Display key.
8. When the program ends the Message Window will show a summary of your workout. The
summary will be displayed for a short time then the console will return to the start-up display.
▲▼
▲▼
CUSTOM USER DEFINED PROGRAMS
The customizable User programs allow you to build and save your own workout. You can build your
own custom program by following the instructions below.
1. Select the User program (User 1 or User 2) then press Enter. If you have already saved a
program to either User 1 or User 2, it will be displayed and you are ready to begin. If not, you will
have the option of inputing a username. In the Message Window, the letter “A” will be blinking.
Use the Level buttons to select the appropriate first letter of your name (pressing the Up button
will switch to the letter “B”; pressing the Down button will switch to letter “Z”). Press Enter when
the desired letter is displayed. Repeat this process until all of the characters of your name have
been pro- grammed (maximum 7 characters). When finished press Stop.
2. If there is a program already stored in User when you press the key, you will have an option to run
the program as it is or delete the program and build a new one. At the welcome message screen,
when pressing Start or Enter you will be prompted: Run Program? Use the Level / to select
Yes or No. If you select No, you will then be asked if you want to delete the currently saved
program. It is necessary to delete the current program if you want to build a new one.
3. The Message Window will ask you to enter your Age. You may enter your age using the Level
/ keys, then press the Enter key to accept the new number and proceed on to the next
screen.
4. You are now asked to enter your Weight. You may adjust the weight number using the Level
/
keys, then press Enter to continue.
5. Next is Time. You may adjust the Time using the Level
/ keys and press Enter to continue.
6. Now the first column will be blinking and you are asked to adjust the level for the first segment of
the workout. When you finish adjusting the first segment, or if you don’t want to change, then
press Enter to continue to the next segment. The next segment will show the same level as the
previously adjusted segment. Repeat the same process as the last segment then press Enter.
Continue this process until all twenty segments have been set.
7. The Message Window will then tell you to start to begin (and save the program) or Enter to
modify the program. Pressing Stop will exit to the start up screen.
8. If you want to increase or decrease the workload at any time during the program press the Level
/ key. This will only affect the Level for the present column in the profile. When the profile
changes to the next column it will return to the preset work level.
9. During the User 1 or User 2 program you will be able to scroll through the data in the Message
Window by pressing the Display key.
10. When the program ends the Message Window will show a summary of your workout. The
summary will be displayed for a short time then the console will return to the start-up display.
▲▼
▲▼
▲
▼
▲▼
▲▼
Dyaco Canada Inc. 2013
16
[email protected]
HEART RATE PROGRAMS
Before we get started, a word about Heart Rate:
The old motto, “no pain, no gain”, is a myth that has been overpowered by the benefits
of exercising comfortably. A great deal of this success has been promoted by the use
of heart rate monitors. With the proper use of a heart rate monitor, many people find
that their usual choice of exercise intensity was either too high or too low and exercise
is much more enjoyable by maintaining their heart rate in the desired benefit range.
To determine the benefit range in which you wish to train, you must first determine your
Maximum Heart Rate. This can be accomplished by using the following formula: 220
minus your age. This will give you the Maximum Heart Rate (MHR)for someone of your
age. To determine the effective heart rate range for specific goals you simply calculate a
percentage your MHR. Your Heart rate training zone is 50% to 90% of your maximum
heart rate. 60% of your MHR is the zone that burns fat while 80% is for strengthening
the cardio vascular system. This 60% to
80% is the zone to stay in for maximum
benefit.
For someone who is 40 years old their
target heart rate zone is calculated:
220 – 40 = 180 (maximum heart rate)
180 x .6 = 108 beats per minute
(60% of maximum)
180 X .8 = 144 beats per minute
(80% of maximum)
So for a 40 year old the training zone would
be
108 to 144 beats per minute.
If you enter your age during programming the console will perform this calculation
automatically. Entering your age is used for the Heart Rate programs. After calculating
your MHR you can decide upon which goal you would like to pursue.
The two most popular reasons for, or goals, of exercise are cardiovascular fitness
(training for the heart and lungs) and weight control. The black columns on the chart
above represent the MHR for a person whose age is listed at the bottom of each column.
The training heart rate, for either cardiovascular fitness or weight loss, is represented by
two different lines that cut diagonally through the chart. A definition of the lines’ goal is in
the bottom left-hand corner of the chart. If your goal is cardiovascular fitness or if it is
weight loss, it can be achieved by training at 80% or 60%, respectively, of your MHR on
a schedule approved by your physician. Consult your physician before participating in
any exercise program.
Dyaco Canada Inc. 2013
17
[email protected]
RATE OF PERCEIVED EXERTION
Heart rate is important but listening to your body also has a lot of advantages. There are
more variables involved in how hard you should workout than just heart rate. Your stress
level, physical health, emotional health, temperature, humidity, the time of day, the last
time you ate and what you ate, all contribute to the intensity at which you should workout.
If you listen to your body, it will tell you all of these things.
The rate of perceived exertion (RPE), also know as the Borg scale, was developed by
Swedish physiologist G.A.V. Borg. This scale rates exercise intensity from 6 to 20
depending upon how you feel or the perception of your effort.
The scale is as follows:
Rating Perception of Effort
6 Minimal
7 Very, very light
8 Very, very light +
9 Very light
10 Very light +
11 Fairly light
12 Comfortable
13 Somewhat hard
14 Somewhat hard +
15 Hard
16 Hard +
17 Very hard
18 Very hard +
19 Very, very hard
20 Maximal
You can get an approximate heart rate level for each rating by simply adding a zero to
each rating. For example a rating of 12 will result in an approximate heart rate of 120
beats per minute. Your RPE will vary depending up the factors discussed earlier. That is
the major benefit of this type of training. If your body is strong and rested, you will feel
strong and your pace will feel easier. When your body is in this condition, you are able to
train harder and the RPE will support this. If you are feeling tired and sluggish, it is
because your body needs a break. In this condition, your pace will feel harder. Again,
this will show up in your RPE and you will train at the proper level for that day.
Dyaco Canada Inc. 2013
18
[email protected]
USING HEART RATE TRANSMITTER (Optional)
How to wear your wireless chest strap transmitter:
1.
2.
3.
4.
5.
6.
Attach the transmitter to the elastic strap using the locking
parts.
Adjust the strap as tightly as possible as long as the strap is
not too tight to remain comfortable.
Position the transmitter with the centered in the middle of
your body facing away from your chest (some people must
position the transmitter slightly left of center). Attach the
final end of the elastic strap by inserting the round end and,
using the locking parts, secure the transmitter and strap
around your chest.
Position the transmitter immediately below the pectoral muscles.
Sweat is the best conductor to measure very minute heart beat electrical signals.
However, plain water can also be used to pre-wet the electrodes (2 ribbed oval areas
on the reverse side of the belt and both sides of the transmitter). It’s also
recommended that you wear the transmitter strap a few minutes before your work out.
Some users, because of body chemistry, have a more difficult time in achieving a
strong, steady signal at the beginning. After “warming up”, this problem lessens. As
noted, wearing clothing over the transmitter/strap doesn’t affect performance.
Your workout must be within range - distance between transmitter/receiver – to
achieve a strong steady signal. The length of range may vary somewhat but
generally stay close enough to the console to maintain good, strong, reliable
readings. Wearing the transmitter immediately against bare skin assures you of
proper operation. If you wish, you may wear the transmitter over a shirt. To do so,
moisten the areas of the shirt that the electrodes will rest upon.
Note: The transmitter is automatically activated when it detects activity from the user’s heart.
Additionally, it automatically deactivates when it does not receive any activity. Although the
transmitter is water resistant, moisture can have the effect of creating false signals, so you should
take precautions to completely dry the transmitter after use to prolong battery life (estimated
transmitter battery life is 2500 hours). The replacement battery is Panasonic CR2032.
ERRATIC OPERATION
Caution! Do not use this treadmill for Heart Rate unless a steady, solid Actual Heart
Rate value is being displayed. High, wild, random numbers being displayed indicate a
problem.
Areas to look for interference which may cause erratic heart rate:
1. Microwave ovens, TV’s, small appliances, etc.
2. Fluorescent lights.
3. Some household security systems.
4. Perimeter fence for a pet.
5. Some people have problems with the transmitter picking up a signal from their
skin. If you have problems try wearing the transmitter upside down. Normally the
transmitter will be oriented so the is right side up.
6. The antenna that picks up your heart rate is very sensitive. If there is an outside
noise source, turning the whole machine 90 degrees may de-tune the
interference.
7. Loose treadmill console or bolts in the upright tube.
8. Another Individual wearing a transmitter within 3’ of your machine’s console.
If you continue to experience problems contact your dealer.
WARNING! - DO NOT USE THE HEART RATE PROGRAM IF YOUR HEART RATE
IS NOT REGISTERING PROPERLY ON THE CYCLE’S DISPLAY!
Dyaco Canada Inc. 2013
19
[email protected]
HEART RATE CONTROL PROGRAM OPERATION
Both programs operate the same, the only difference is that HR1 is set to 60% and HR2 is set
to 80% of the maximum heart rate. They both are programmed the same way.
To start an HRC program follow the instructions below or just select the HR1 or HR2
program, then the Enter button and follow the directions in the Message Window.
1.
2.
3.
4.
5.
Press the HR1 or HR2 key then press the Enter key.
The Message Window will ask you to enter your Age. You may enter your Age, using
the / keys, then press the Enter key to accept the new number and proceed on to
the next screen.
You are now asked to enter your Weight. You may adjust the Weight number using the
/ keys, then press Enter to continue.
Next is Time. You may adjust the Time and press Enter to continue.
Now you are asked to adjust your Target Heart Rate. This is the heart rate level you
will strive to reach and maintain during the program. Adjust the level and then press
Enter. NOTE: The heart rate that appears is based on the % you accepted in Step 2. If you change this
▲▼
▲▼
number it will either increase or decrease the % from Step 2.
6.
Now you are finished editing the settings and can begin your workout by pressing the
Start key. You can also go back and modify your settings by pressing the Enter key.
NOTE: At any time during the editing of Data you can press the Stop key to go back one level, or
screen.
7.
If you want to increase or decrease the workload at any time during the program press
the / key. This will allow you to change your target heart rate at any time
during the program.
8. During the HR1 or HR2 programs you will be able to scroll through the data in the
Message Window by pressing the adjacent Display key.
9. When the program ends you may press Start to begin the same program again or
Stop to exit the program.
▲▼
Dyaco Canada Inc. 2013
20
[email protected]
GENERAL MAINTENANCE
1. Wipe down all areas in the sweat path with a damp cloth after each workout.
2. If a squeak, thump, clicking or rough feeling develops the main cause is most likely
one of two reasons:
I. The hardware was not sufficiently tightened during assembly. All bolts that were
installed during assembly need to be tightened as much as possible. It may be
necessary to use a larger wrench than the one provided if you cannot tighten
the bolts sufficiently. Ninety percent of calls to the service department for noise
issues can be traced to loose hardware.
II. The crank arm nut needs to be retightened
III. If squeaks or other noises persist, check that the unit is properly leveled. There
are 2 leveling pads on the bottom of the rear stabilizer, use a 14mm wrench (or
adjustable wrench) to adjust the levelers.
MAINTENANCE MENU IN CONSOLE SOFTWARE
The console has built in maintenance/diagnostic software. The software will allow
you to change the console settings from English to Metric and turn off the beeping
of the speaker when a key is pressed for example. To enter the Maintenance Menu
(may be called Engineering mode, depending on version) press and hold down the
Start, Stop and Enter keys Keep holding the keys down for about 5 seconds and
the Message Window will display “Engineering mode”. Press the Enter button to
access the menu below. Press the Level / keys to navigate the menu.
A. Key Test
B. Display Test
C. Functions
I.
ODO Reset - Resets the odometer reading to zero
II.
Units - Choose from English(Imperial) or Metric display readings
III.
Display Mode - Turn off to have the console power down automatically
after 30 minutes of inactivity
IV.
Motor Test - Continually runs the tensioning gear motor
V.
Manual - Allows stepping of the gear motor
VI.
Pause Mode - Turn on to allow 5 minutes of pause, turn off to have console
pause indefinitely
VII.
Key Tone - Turn on or off the beep sound when a key is pressed
D. Security
E. Factory Settings - For Factory use only
F. Exit
▲▼
Dyaco Canada Inc. 2013
21
[email protected]
EXPLODED VIEW DIAGRAM
Dyaco Canada Inc. 2013
22
[email protected]
PARTS LIST
KEY NO.
PART NO.
1
2
3
5
6
7
8
9
10
11
14
15
16L
16R
17
18
19
20
21
22
23
24
25
26
29
31
34
35
36
37
38
40
41
42
43
45
46
47
48
49
50
51
52
53
54
57
58
59
61
6739401
6739402
6739403
6739405
6739406
6739407
6739408
6739409
6739410
6739411
6739414
6739415
6739416L
6739416R
6739417
6739418
6739419
6739420
6739421
6739422
6739423
6739424
6739425
6739426
6739429
6739431
6739434
6739435
6739436
6739437
6739438
6739440
6739441
6739442
6739443
6739445
6739446
6739447
6739448
6739449
6739450
6739451
6739452
6739453
6739454
6739457
6739458
6739459
6739461
Dyaco Canada Inc. 2013
Description
Main Frame
Console Mast
Seat Handle Bar
Rear Stabilizer
Seat Slider
Sliding Seat Mount
Fix Plate
Front Linkage Assembly
Bearing Housing
Crank Axle
Drive Belt
Drive Pulley
Crank Arm(L)
Crank Arm(R)
6004_Bearing
6203_Bearing
Seat
Flywheel
Gear Motor
Magnet
500m/m_Sensor W/Cable
1" × 5T × 285m/m_Handgrip Foam
1" × 5T × 200m/m_Handgrip Foam
800m/m_Handpulse W/Cable Assembly
1300m/m_Computer Cable
750m/m_DC Power Cord
Console assembly
Rubber Foot
Chain Cover (L)
Chain Cover (R)
Console Mast Cover
Front Stabilizer Cover
Rear Stabilizer Cover
Handgrip Side Cap (Top)
Handgrip Side Cap (Bottom)
Pedal (L)
Pedal (R)
Transportation Wheel
Rubber Foot Pad
Button Head Plug
3/8" × 2-1/4"_Hex Head Bolt
5/16" × 5/8"_Hex Head Bolt
5 × 19m/m_Tapping Screw
5/16" × 1-3/4"_Button Head Socket Bolt
1/4" × 3/4"_Hex Head Bolt
3/16" × 15mm × 1.5T_Flat Washer
M5 × 12m/m_Phillips Head Screw
3/8" × 2m/m_Flat Head Socket Bolt
5 × 16m/m_Tapping Screw
23
Q’TY
1
1
1
1
1
1
1
1
1
1
1
1
1
1
2
2
1
1
1
1
1
2
2
2
1
1
1
2
1
1
1
1
1
2
2
1
1
2
2
4
2
13
2
2
4
1
11
2
6
[email protected]
KEY NO.
PART NO.
62
63
65
66
67
68
70
71
72
79
80
82
83
86
89
90
91
92
93
95
96
98
99
100
101
103
104
105
106
107
109
114
124
126
127
128
129
130
131
6739462
6739463
6739465
6739466
6739467
6739468
6739470
6739471
6739472
6739479
6739480
6739482
6739483
6739486
6739489
6739490
6739491
6739492
6739493
6739495
6739496
6739498
6739499
67394100
67394101
67394103
67394104
67394105
67394106
67394107
67394109
67394114
67394124
67394126
67394127
67394128
67394129
67394130
67394131
Dyaco Canada Inc. 2013
Description
Q’TY
Ø3 × 20m/m_Tapping Screw
Ø3.5 × 16m/m_Sheet Metal Screw
Ø3 × 10m/m_Tapping Screw
Ø17_C Ring
Ø20_C Ring
4 × 12m/m_Sheet Metal Screw
3/8" × 19mm × 1.5T_Flat Washer
3/8" × 25mm × 2T_Flat Washer
5/16" × 18mm × 1.5T_Flat Washer
1/4" × 8T_Nyloc Nut
5/16" × 6T_Nyloc Nut
3/8" × 7T_Nut
M10 × 1.25m/m_Nut
Seat Adjustment Knob
3/8"-UNF26 × 3T_Nut
3/8"-UNF26 × 4T_Nut
3/8"-UNF26_Nut
13/15m/m_Wrench
Phillips Head Screw Driver
Chest Strap (Optional)
Crank Arm End Cap
Steel Cable
5/16" × 19 × 1.5T_Curved Washer
12/14m/m_Wrench
Drink Bottle (Optional)
5/16" × 1.5T_Split Washer
Power Adaptor
Handle Bar Cover
Locking Knob
Center spatial wrap
400m/m_Audio Cable (Optional)
Slide Spacer
On/Off Switch Bracket
3/8" × 25.4mm × 3T_Flat Washer
M10 × P1.25 × 15L_Button Head Socket Bolt
1/4" × 70L_Idle Wheel Screw
M6_Nut Stopper
1/4" × 8T_Nyloc Nut
Rear Stabilizer Attaching Plate
24
4
8
4
1
2
2
2
3
12
4
2
4
2
1
1
1
2
1
1
1
2
1
1
1
1
2
1
1
1
1
1
1
1
1
1
1
1
1
1
[email protected]
MANUFACTURER’S LIMITED WARRANTY
Dyaco Canada Inc. warrants all its fitness bike parts for a period of time listed below from the date of retail sale, as
determined by sale receipt, or in the absence of a sales receipt eighteen (18) months from the original factory shipping date.
Dyaco Canada Inc.’s responsibilities include providing new or remanufactured parts, at Dyaco Canada Inc.’s option, and
technical support to our independent dealers and servicing organizations. In the absence of a dealer or service organization,
these warranties will be administered by Dyaco Canada Inc. directly to a consumer. The warranty period applies to the
following components:
Frame
lifetime
Parts
3 years
Labour
1 year
This warranty applies only to products in ordinary household use, and the consumer is responsible for the items listed below:
1. The warranty registration card must be completed and returned to the address listed on the card within 10 days of the
original purchase to validate the Dyaco Canada Inc.’s limited warranty.
2. Proper use of the fitness bike in accordance with the instructions provided in this manual.
3. Proper installation in accordance with instructions provided with the fitness bike and with all local electric codes.
4. Proper connection to a grounded power supply of sufficient voltage, replacement of blown fuses, repair of loose
connections or defects in house wiring.
5. Expenses for making the fitness bike accessible for servicing, including any item that was not part of the fitness bike at
the time it was shipped from the factory.
6. Damages to the fitness bike finish during shipping, installation or following installation.
7. Routine maintenance of this unit as specified in this manual.
EXCLUSIONS
This warranty does not cover the following:
1. CONSEQUENTIAL, COLLATERAL, OR INCIDENTAL DAMAGES SUCH AS PROPERTY DAMAGE AND
INCIDENTAL EXPENSES RESULTING FROM ANY BREACH OF THIS WRITTEN OR ANY IMPLIED WARRANTY.
Note: Some states do not allow the exclusion or limitation of incidental or consequential damages, so this limitation or
exclusion may not apply to you.
2. Service call reimbursement to the consumer. Service call reimbursement to the dealer that does not involve
malfunction or defects in workmanship or material, for units that are beyond the warranty period, for units that are
beyond the service call reimbursement period, for fitness bike not requiring component replacement, or fitness bike not
in ordinary household use.
3. Damages caused by services performed by persons other than authorized Dyaco Canada Inc. service companies; use
of parts other than original Dyaco Canada Inc. parts; or external causes such as corrosion, discoloration of paint or
plastic, alterations, modifications, abuse, misuse, accident, improper maintenance, inadequate power supply, or acts
of God.
4. Products with original serial numbers that have been removed or altered.
5. Products that have been: sold, transferred, bartered, or given to a third party.
6. Products that do not have a warranty registration card on file at Dyaco Canada Inc. Dyaco Canada Inc. reserves the
right to request proof of purchase if no warranty record exists for the product.
7. THIS WARRANTY IS EXPRESSLY IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED,
INCLUDING THE WARRANTIES OF MERCHANTABILITY AND/OR FITNESS FOR A PARTICULAR PURPOSE.
8. Product use in any environment other than a residential setting.
9. Warranties outside of North America may vary. Please contact your local dealer for details.
SERVICE
by the serial number establishes the labor warranty period should service be required. If service is performed, it is in your
best interest to obtain and keep all receipts. This written warranty gives you specific legal rights. You may also have other
rights that vary from state to state. Service under this warranty must be obtained by following these steps, in order:
1. Contact your selling authorized SOLE dealer. OR
2. If you have any questions about your new product or questions about the warranty contact Dyaco Canada Inc. at
1-888-707-1880.
3. If no local service is available, Dyaco Canada Inc. will repair or replace the parts, at Dyaco Canada Inc.’s option, within
the warranty period at no charge for parts. All transportation costs, both to our factory and upon return to the owner,
are the responsibility of the owner. The owner is responsible for adequate packaging upon return to Dyaco Canada Inc.
Dyaco Canada Inc. is not responsible for damages that occur during shipping. Make all freight damage claims with the
appropriate freight carrier. DO NOT SHIP ANY UNIT TO OUR FACTORY WITHOUT A RETURN AUTHORIZATION
NUMBER. All units arriving without a return authorization number will be refused.
4. For any further information, or to contact our service department by mail, send your correspondence to:
Dyaco Canada Inc.
6050 Don Murie Street
Niagara Falls, ON
L2G 0B3
Product features or specifications as described or illustrated are subject to change without notice. All warranties are made
by Dyaco Canada Inc.
Dyaco Canada Inc. 2013
25
[email protected]
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement