Using PAYD - For iPad, iPhone and iPod touch

Using PAYD - For iPad, iPhone and iPod touch
D
Y
A
P
G
USIN
®
TM MONERIS PAYD and MONERIS PAYD BE PAYMENT READY & Design are trade-marks of Moneris Solutions Corporation.
® MONERIS and PAYD are registered trade-marks of Moneris Solutions Corporation. INTERAC is a registered trade-mark of Interac
Inc. APPLE, IPAD, IPHONE, IPOD TOUCH and APP STORE are trade-marks of Apple Inc., registered in the U.S. and other countries.
All other marks or registered trade-marks are the property of their respective owners.
© 2016 Moneris Solutions Corporation, 3300 Bloor Street West, Toronto, Ontario, M8X 2X2.
All Rights Reserved. This manual shall not wholly or in part, in any form or by any means, electronic, mechanical, including
photocopying, be reproduced or transmitted without the authorized consent of Moneris Solutions Corporation (“Moneris”). This
guide is for informational purposes only. Neither Moneris nor any of its affiliates shall be liable for any direct, indirect, incidental,
consequential or punitive damages arising out of use of any of the information contained in this guide. Neither Moneris or any of
its affiliates nor any of our or their respective licensors, licensees, service providers or suppliers warrant or make any representation
regarding the use or the results of the use of the information, content and materials contained in this guide in terms of their
correctness, accuracy, reliability or otherwise. Your credit and/or debit card processing is separately governed by the Terms and
Conditions of your Moneris VISA Merchant Agreement, your Moneris MasterCard Merchant Agreement, your Moneris Discover
Merchant Agreement and/or your INTERAC Merchant and Terminal Agreement (collectively, the “Merchant Agreements”), as
applicable with Moneris. It is the merchant’s responsibility to ensure that proper card processing procedures are followed at
all times. Please refer to your Merchant manuals and the Terms and Conditions of your Merchant Agreement(s) for details. The
Moneris Merchant Operating Manual is available for free download at getpayd.com/manuals.
For Apple® iPad®,
iPhone® and iPod touch®
PAYD_ Apl_ YT_ E (01/16)
(01/16)
Table of Contents
Important: Read First • Before you begin
• Activating your PAYD store
• Downloading and installing the PAYD App from the App StoreSM • Ready to use the PAYD App?
• Setting the transaction details level
• Setting a default payment device
• Enabling Pre-Authorizations
• Enabling tip prompting
• Location-mapping transactions • Setting a tax rate
• Configuring a quick PIN
• Pre-filling the Username/Store ID at sign-in
• Setting an e-mail address to receive exported reports
• Auto-sending transaction receipts to a set merchant e-mail address • Setting a default PAYD App screen
• Setting the default language of the PAYD App
• Signing in with full credentials
• Signing out
• Signing in with a quick PIN
• The PAYD App main menu
• Need to reset your sign-in password?
• Can’t remember your quick PIN?
• Configure your security question/answer
• Determining the PAYD App’s version number
• Sale with credit card
• Sale with cash
• Pre-Authorization with credit card
• Customer prompts in the PAYD App
• Voiding/Refunding a transaction
• Capturing a Pre-Authorization
• Signature capture for receipts
• E-mailing a transaction receipt
• Sending an SMS text message transaction notification
• Card masking
• Transactions Report
• Details screen (transactions)
• Totals (Batches) Report
• Error messages in the PAYD App
• Other issues
Setting up the PAYD App on your mobile device Optional features For more information
and assistance:
Web: getpayd.com/payd/support
Email: [email protected]
Toll-free: 1-855-423-PAYD (7293)
Record your Moneris® merchant ID here:
Signing into/Signing out of the PAYD App
The PAYD card reader
Transactions
Receipts
Reporting
Troubleshooting
2
2
3
3
4
5
6
6
7
7
8
9
9
10
11
12
13
14
14
15
15
16
17
18
18
19
19
20
21
22
22
24
25
26
28
30
32
32
33
34
35
36
36
37
39
40
40
41
1
Important: Read First
Before you begin
Setting up the PAYD App
on your mobile device
This guide provides instructions on how to download and install the PAYD App
on an Apple iPad, iPhone, and iPod touch (collectively referred to as “mobile
device” or “device”) and use the PAYD App to perform transactions.
Activating your PAYD store
Note: For instructions on how to use the Moneris PAYDTM Administration to
manage your store and any other registered account users, refer to the Using
Moneris PAYD Administration guide.
2.In the Merchant ID and Store ID fields, enter your Merchant ID and Store ID
(refer to your Moneris Welcome e-mail for these IDs).*
1.Ensure that you have the following components:
• Mobile device.
• Moneris PAYD card reader (provided in your welcome kit).
2.If you are activating your PAYD store, ensure that you have your Merchant ID
and Store ID (refer to your Moneris Welcome e-mail for these IDs).
Note: Based on your PAYD account, you may not be able to accept credit cards.
If you want to accept credit cards as well as cash, please visit getpayd.com or
call us toll-free at 1-855-423-PAYD (7293).
3.Do one of the following:
• If you have all the required elements, go to step 4.
• If you do not have the required elements, please contact us:
call 1-855-423-PAYD (7293) or email [email protected]
4.Determine your setup requirements:
• If your store has not yet been activated, proceed to Activating your PAYD
store on page 3.
• If your store has already been activated, proceed to Downloading and
installing the PAYD App from the App Store on page 4.
1.Visit getpayd.com/activate.
3. Tap Next.
4. In the First name and Last name fields, enter your first name and last name.*
5. In the Email field, enter your e-mail address.*
Note: Once you have successfully completed the activation steps, a
confirmation e-mail will be sent to this address. If you ever need to have your
password reset, a temporary password will be sent to this address.
6. In the Employee ID and Password/Confirm password fields, enter the
Username and password under which you want to sign into your store.*
7. In the Security question and Answer fields, enter a security question and the
answer.*
Note: Periodically you will be prompted to answer this question when signing in.
8. Tap Save.
9. The statement “Activation completed” appears above the fields on the
Moneris PAYD Administration sign-in screen.
Note: You will shortly receive an Activation Confirmation e-mail containing your
Store ID and Employee ID (the Username you created).
10.Proceed to Downloading and installing the PAYD App from the App Store on
page 4.
* The information entered here applies to both the PAYD App and Moneris PAYD Administration.
2
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
3
Downloading and installing the PAYD App
from the App Store
Ready to use the PAYD App?
Follow the steps below to download and install the PAYD App to your mobile
device.
2.To learn about the PAYD App and some of its features, read the sections listed
here:
•Configuring optional PAYD App settings, see pages 6 to 14.
•Signing out and options for signing into the PAYD App, see pages 15 to 20.
•Performing transactions, see pages 22 to 31.
•Generating reports, see pages 36 to 39.
SM
Note: If you have already downloaded and installed the PAYD App to your mobile
device, go directly to step 6.
1.From your mobile device’s home screen, open the App Store.
1.To begin using the PAYD App, you must sign in (see page 15).
2.In the Business category, search for “PAYD” then select the PAYD App.
Important: Read the PAYD “Terms of Use” before proceeding with the download.
3.Tap Free, and then tap INSTALL APP.
4.When prompted, enter your Apple ID and password, and then tap OK.
5.When the installation is complete, your mobile device’s home screen displays.
•If prompted to allow the PAYD App to access your device’s location data, grant
this access if you want to use the location mapping feature (see page 9).
•If prompted to allow the PAYD App to access your mobile device’s
microphone, grant this access so that you can use the PAYD card reader as
a card entry device (see page 21).
•If you want to e-mail transaction receipts or send SMS text message
notifications to a contact from your mobile device’s contacts list without
having to enter the address or phone number each time you want to take
the action (see pages 33 and 34 respectively), ensure that your device’s
privacy settings are configured to allow the PAYD App to access the device’s
contacts data.
6.Proceed to Ready to use the PAYD App? on page 5.
4
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
5
Optional features
Setting the transaction details level
Sets the optional transaction details (secondary transaction identifiers,
Customer ID and Order ID) that you can enter during a transaction.
Setting a default payment device
Sets a default payment device for transactions
1.Start on the “Settings” screen.
Note: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Interface.
Note: Even if optional transaction details are enabled, you may bypass entering
data in the Customer ID and Order ID fields during a transaction. If you enter data
in one or both of these fields during a transaction, you can subsequently retrieve
the transaction by using one or more of the identifiers as search criteria (e.g., when
generating a report and/or doing a Refund, Void, or Capture).
3.Specify the default payment device by tapping one of:
•Swipe/Keyed: if the PAYD card reader is connected to your mobile device,
sets “Swipe” as the default. If the PAYD card reader is not connected to your
mobile device, sets “Keyed” as the default.
•Cash: sets “Cash” as the default.
1.Start on the “Settings” screen.
4.Tap
N
ote: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Interface.
3.Specify the optional transaction details to include by tapping one of:
•Quick Pay: excludes the Customer ID and Order ID.
•Minimal: includes only the Customer ID.
•Full: includes the Customer ID and Order ID.
4.Tap
to return to the main menu.
N
ote: To change this setting on a different mobile device, repeat these steps on
the other device.
to return to the main menu.
Note: To change this setting on a different mobile device, repeat these steps
on the other device.
Enabling Pre-Authorizations
Enables the option to process Pre-Authorizations.
1.Start on the “Settings” screen.
N
ote: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Interface.
3.Tap (checkmark or unmark the box) Display Preauth:
•With checkmark: Option to “Process as Preauth” always displays on the
“Sale” screen (see page 25).
•Without checkmark: Option to “Process as Preauth” does not display on the
“Sale” screen.
4.Tap
to return to the main menu.
N
ote: To enable/disable this feature on a different mobile device, repeat these
steps on the other device.
6
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
7
Enabling tip prompting
Location-mapping transactions
If enabled, tip prompts appear during every credit Sale or Pre-Authorization.
The PAYD App can map the location of PAYD financial transactions performed
from your mobile device if: 1) the device is configured to use a location service;
2) the device is configured to allow the PAYD App to access the device’s location
data; and 3) the transaction response is APPROVED or DECLINED .
1.Start on the “Settings” screen.
Note:
If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Tip.
3.Tap (checkmark or unmark the box) Tip on Purchase:
•With checkmark: Tip prompts appear during every credit Sale or
Pre-Authorization.
•Without checkmark: Tip prompts do not appear during any transaction.
4.If you enabled tip prompting, you may use the three pre-set percentages,
or set your own default values:
To change one or more default tip percentages:
a.Enter a tip percentage in one or more “Quick Tip” fields.
b.Tap Save Tip Values.
c. When the “Success” message appears, tap OK.
To leave the default tip percentages as they are:
a.Go directly to the next step.
5.Tap
to return to the main menu.
N
ote: To enable/disable this feature or change this setting on a different mobile
device, repeat these steps on the other device.
ote: Your mobile device may prompt you to allow the PAYD App to access the
N
device’s location data. You must grant this access to use the location mapping feature.
If you want to enable this feature on a different mobile device, repeat these steps
on the other device.
Viewing a location map
To view the mapped location of a PAYD transaction, you must access the
transaction’s “Details” screen (see page 37) from any mobile device.
Setting a tax rate
Sets a tax name and a percentage by which the tax will be auto-calculated for
every Sale and Pre-Authorization.
Note: The tax will be calculated based on the original transaction amount
excluding any tip (for information about tip prompting, see page 8).
1.Start on the “Settings” screen.
Note: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Tax.
3.Tap (checkmark or unmark the box) Calculate Tax:
•With checkmark: Option to calculate/add tax always appears on the “Sale” screen.
N
ote: By default the tax box will always be checkmarked (selected) on the
“Sale” screen, but you may unmark (deselect) it if you do not want to add tax
to that Sale (or Pre-Authorization).
•Without checkmark: Option to calculate/add tax does not appear during any
transaction.
8
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
9
4.In the Tax Description and Tax Rate (%) fields, enter the tax name and the tax
percentage.
Disabling a quick PIN
Note: This name will appear on the “Sale” screen but may be truncated if longer
than 12 characters.
N
ote: If another screen is displayed, tap
then tap Settings.
5.Tap Save Tax Rate.
2.Tap Quick Login.
6.When the “Success” message appears, tap OK.
3.Tap (unmark the box) PIN Login.
7.Tap
4.When the “Success” message appears, tap OK.
to return to the main menu.
Note: To enable/disable this feature or change this setting on a different mobile
device, repeat these steps on the other device.
to return to the main menu, and
N
ote: If you want to set a new (or the same) quick PIN, see Setting a quick PIN
for sign-in on page 10.
5.Tap
Configuring a quick PIN
to return to the main menu.
N
ote: To disable this feature on a different mobile device, repeat these steps
on the other device.
Setting a quick PIN for sign-in
Pre-filling the Username/Store ID at sign-in
Sign into the PAYD App with a 4-digit PIN.
1.Start on the “Settings” screen.
N
ote: If another screen is displayed, tap
then tap Settings.
1.Start on the “Settings” screen.
to return to the main menu, and
2.Tap Quick Login.
3.Tap (checkmark the box) PIN Login.
4.Enter a 4-digit PIN, and then re-enter it when prompted.
Pre-fills the PAYD “full” sign-in fields with your PAYD Username and PAYD Store
ID credentials whenever you launch the PAYD App (see page 15).
1.Start on the “Settings” screen.
N
ote: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Login Credentials.
5.Tap Save Quick PIN.
3.Fill in the field(s) that you want to have pre-filled whenever you launch the
PAYD App.
6.When the “Success” message appears, tap OK.
Note: To disable this feature, leave the field(s) blank.
N
ote: The next time you sign in, you will be prompted to enter your 4-digit PIN
(see page 17).
4.Tap Save Login Credentials.
7.Tap
to return to the main menu.
N
ote: To enable this feature or change this setting on a different mobile device,
repeat these steps on the other device.
10
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
5.When the “Success” message appears, tap OK.
6.Tap
to return to the main menu.
N
ote: To enable/disable this feature or change this setting on a different mobile
device, repeat these steps on the other device.
11
Setting an e-mail address to receive exported
reports
Auto-sending transaction receipts to a set
merchant e-mail address
Sets an e-mail address to which transaction reports will be sent when you
export report results to a comma-separated values (CSV) file (see page 36).
Sets an e-mail address to which the PAYD App will automatically e-mail PAYD
transaction receipts. The PAYD App e-mails receipts only for APPROVED or
DECLINED responses.
Note: Results include the following transaction data (CSV fields appear in
quotations): Store ID (“store id”), Terminal (ECR) ID (“terminal”), Batch Number
(“batch”), Date and Time (“date time”), Transaction Type (“type”), Order ID (“order
no”), Customer ID (“cust id”), Amount (“amount”), Card Type (“card type”),
Account Number (“card”), Result (“result”), Auth Code (“auth code”), Response
Code (“response code”), Clerk ID (“clerk”), and Customer E-mail (“email”).
1.Start on the “Settings” screen.
N
ote: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Export to CSV.
3.In the Export Email Address field, enter the e-mail address to which the
CSV-format text file will be sent when you export your report results.
Note: To disable this feature, leave the field blank.
4.Tap Save Export Email.
5.When the “Success” message appears, tap OK.
6.Tap
to return to the main menu.
N
ote: To enable/disable this feature or change this setting on a different mobile
device, repeat these steps on the other device.
12
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
ote: Receipts will be e-mailed to the set address in the background (i.e., the
N
PAYD App will give no visual indication that an e-mail has been sent following
a transaction).
1.Start on the “Settings” screen.
N
ote: If another screen is displayed, tap
then tap Settings.
to return to the main menu, and
2.Tap Merchant Email.
3.In the Merchant Email Address field, enter the e-mail address to which a
receipt will automatically be sent following a transaction performed on this
mobile device.
Note: To disable this feature, leave the field blank.
4.Tap Save Merchant Email.
5.When the “Success” message appears, tap OK.
6.Tap
to return to the main menu.
Note: To enable/disable this feature or change this setting on a different mobile
device, repeat these steps on the other device.
13
Setting a default PAYD App screen
Sets a default screen (“Sale”, “Reports”, “ Totals”, or “Settings”) to open whenever
you sign into the PAYD App.
Signing into/Signing out
of the PAYD App
Note: “Sale” is pre-set as the default screen.
1.Start on the main menu.
Note: If another screen is displayed, tap
.
2.Press and hold down the main menu item (Sale, Reports, Totals, or Settings)
that you want to set as your default screen.
Note: “Help” and “Sign Out” cannot be set as default screens.
3.Release your hold on the menu item when a confirmation message appears
indicating that the default screen has been set.
Signing in with full credentials
Follow these steps to sign in using full credentials.
Note: If you have configured a quick PIN, see page 17.
1.From your mobile device’s home screen, tap the PAYD
PAYD App.
icon to launch the
2.Wait for the PAYD “full” sign-in screen to display:
N
ote: Whenever you sign in with your credentials, the default screen that you
have just set will display. To change this setting on a different mobile device,
repeat these steps on the other device.
Setting the default language of the PAYD App
The language of the PAYD App is determined by the language set for your
mobile device.
Note: If your device is configured for a language other than English or French,
the PAYD App defaults to English.
14
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
15
3.Enter your credentials in the sign-in fields: PAYD Username, PAYD Store ID,
and PAYD Password.
Note: Some fields may be pre-filled (see page 11).
Note: If you do not have a PAYD account, tap the Register button and follow the
on screen prompts to register for a cash account. If you want to accept credit
cards as well as cash, please visit getpayd.com or call us toll-free at
1-855-423-PAYD (7293).
4.Tap Sign In.
•If prompted to allow the PAYD App to access your device’s location data,
grant this access if you want to use the location mapping feature (see page 9).
•If prompted to allow the PAYD App to access your mobile device’s
microphone, grant this access so that you can use the PAYD card reader as
a card entry device (see page 21).
•If prompted to change your password, enter the required data, and tap Save Password.
•If prompted to select and answer one or more security questions, see page 19.
Signing in with a quick PIN
Follow these steps to sign in using a 4-digit quick PIN.
Note: To enable this method of signing in, see Setting a quick PIN for sign-in
on page 10.
1.From your mobile device’s home screen, tap the PAYD
PAYD App.
icon to launch the
2.Wait for the “Enter PIN” sign-in screen to display:
5.Your default PAYD screen displays once you are signed in.
Note: To change the default screen, see page 14.
Signing out
To ensure that unauthorized PAYD transactions cannot be performed from your
mobile device, sign out of the PAYD App when you are not using it.
1.Start on the main menu.
Note: If another screen is displayed, tap
.
2.Tap Sign Out.
3.When the PAYD sign-in screen displays, it means you are signed out.
Note: Depending on how you have configured the PAYD App, the “full” sign-in
screen may display (see page 15) or the “Enter PIN” sign-in screen may display
(see page 17).
16
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
3.In the Enter PIN field, enter your 4-digit quick PIN.
Note: You will automatically be signed in once you enter the last digit;
otherwise, tap Sign In.
Note: If you do not have a PAYD account, tap the Register button and follow the
on screen prompts to register for a cash account. If you want to accept credit
cards as well as cash, please visit getpayd.com or call us toll-free at
1-855-423-PAYD (7293).
4.Your default PAYD screen displays once you are signed in.
Note: To change the default screen, see page 14.
17
The PAYD App main menu
Can’t remember your quick PIN?
From this menu, you can access any transaction, report, or setting in the PAYD App.
• To return to this menu from any other screen, simply tap
at the top of the
screen.
1.From your mobile device’s home screen, tap the PAYD
PAYD App.
icon to launch the
2.When the PAYD “Enter PIN” sign-in screen displays, tap Forgot PIN?.
3.When the PAYD “full” sign-in screen displays, enter your full sign-in credentials
(see page 15).
N
ote: If you have also forgotten your sign-in password, see Need to reset your
sign-in password? on page 18.
4.Once you are signed in, you may change or disable your quick PIN (see
Disabling a quick PIN on page 11).
Configure your security question/answer
The question/answer that you configure will be used to identify you in the event
that you forget your password. (Periodically you may be prompted to answer the
question when signing in.)
Need to reset your sign-in password?
Note: The information that you enter here also applies to Moneris PAYD
Administration.
1.From your mobile device’s home screen, tap the PAYD
PAYD App.
1.Select a question from the Choose security question drop-down list, and enter
an answer in the Security Answer field.
icon to launch the
2.On the PAYD “full” sign-in screen, tap Forgot Password?.
3.Enter your Username and Store ID, and tap Next.
N
ote: If there is more than one drop-down list, select the additional questions,
and then enter answers in the corresponding fields.
4.Answer the security question, and tap Next.
2.If the Email Address field appears, enter your e-mail address.
5.When the “Success” message appears, tap OK.
N
ote: If you ever need to have your password reset, a temporary password will
be sent to this address.
6.A temporary password will be e-mailed to the address that you registered to
your PAYD store sign-in account.
7.When you next sign in (see page 15), be sure to enter the temporary password
in the PAYD Password field.
N
ote: You will subsequently be prompted to create a new password, which you will
use from that point on to sign into the PAYD App and Moneris PAYD Administration.
18
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
3.Tap Save Security Question (or Save Security Questions).
4.When the “Sale” screen displays, proceed to Ready to use the PAYD App? on
page 5, and begin at step 2.
19
Determining the PAYD App’s version number
1.Start on the “Settings” screen.
Note: If another screen is displayed, tap
and then tap Settings.
2.The version number of the PAYD App appears near the bottom of the
“Settings” screen (appears as “PAYD mobile app v#.##”).
The PAYD card reader
When you want to swipe a card (e.g., during a Sale or Pre-Authorization
transaction), you must connect the PAYD card reader to your mobile device
as follows:
1.Make sure the media speaker on your mobile device is turned off.
2.Ensure that the volume level of your mobile device is maximized.
3.Connect the PAYD card reader:
PAYD card reader
plugged into
audio jack
(not shown)
Stabilizer
flap
(not shown)
PAYD card
reader
Swiping a card
Swipe the card on the connected PAYD card reader as shown above.
20
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
21
Transactions
If you need to manually enter the card data:
a.Disconnect the PAYD card reader if it is connected to your mobile device.
b.Tap Keyed.
c.In the Card Number field, enter the card number.
d.In the Exp (MMYY) field, enter the card expiry date.
• If the CVV field appears, enter the 3- or 4-digit card verification value (code).
Sale with credit card
Credit card sale of goods and services.
1.Start on the “Sale” screen.
N
ote: If another screen is displayed, tap
then tap Sale.
to return to the main menu, and
•If the Customer ID and Order ID fields appear and you want to track the
transaction with your own identifier(s), enter the required data in one or
both fields; otherwise, leave these fields blank to bypass entering any
identifier.
N
ote: If you enter your own Order ID, it must be unique. If you don’t enter
your own Order ID, it will be generated automatically.
2.In the Amount ($) field, enter the Sale amount (#.##).
•If the tax 00% ($) field/box appears and is checkmarked, the tax that will be
added displays in the field while the total transaction amount (including the
tax) displays in the Total ($) field.
Note: If you do not want to add the tax to this transaction, tap (unmark)
the tax 00% ($) box.
4.Tap Process Transaction.
• If “Please specify a tip amount” appears, see page 26.
• If “Please swipe card” appears, swipe the card on the connected PAYD card
reader (see page 21).
• If the “Customer Signature” screen displays, capture the customer’s
signature (see page 32).
5.Wait for the APPROVED or DECLINED response to appear.
6.The transaction is complete.
• To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address (the
PAYD App will not notify you that the e-mail has been sent).
• To send an SMS text message notification, see page 34.
7.Tap
to return to the main menu.
3.Capture the card data:
To swipe the card:
a.Ensure that the PAYD card reader is connected to your mobile device
(see page 21).
b.Tap Swipe.
22
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
23
Sale with cash
Pre-Authorization with credit card
Cash sale of goods and services.
Authorization of an amount on a credit card if the final transaction amount
is unknown.
1.Start on the “Sale” screen.
Note: If another screen is displayed, tap
then tap Sale.
to return to the main menu, and
2.Tap Cash.
•If the Customer ID and Order ID fields appear and you want to track the
transaction with your own identifier(s), enter the required data in one or both
fields; otherwise, leave these fields blank to bypass entering any identifier.
Note: If you enter your own Order ID, it must be unique. If you don’t enter
your own Order ID, it will be generated automatically.
3.In the Amount ($) field, enter the Sale amount (#.##).
•If the tax 00% ($) field/box appears and is checkmarked, the tax that will be
added displays in the field while the total transaction amount (including the
tax) displays in the Total ($) field.
Note: If you do not want to add the tax to this transaction, tap (unmark)
the tax 00% ($) box.
4.In the Amount Tendered ($) field, enter the amount tendered by the customer.
Note: The Change Due ($) field will automatically display the amount owed
to the customer.
5.Tap Process Transaction.
6.Wait for the APPROVED response to appear.
7.The transaction is complete.
• To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address (the
PAYD App will not notify you that the e-mail has been sent).
• To send an SMS text message notification, see page 34.
8.Tap
24
to return to the main menu.
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
IMPORTANT: To receive funds, you must perform a Capture at a later time (see page 30).
1.Start on the “Sale” screen.
Note: If another screen is displayed, tap
then tap Sale.
to return to the main menu, and
2.Tap (checkmark the box) Process as Preauth.
•If the Customer ID and Order ID fields appear and you want to track the
transaction with your own identifier(s), enter the required data in one or both
fields; otherwise, leave these fields blank to bypass entering any identifier.
Note: If you enter your own Order ID, it must be unique. If you don’t enter
your own Order ID, it will be generated automatically.
3.In the Amount ($) field, enter the Pre-Authorization amount (#.##).
•If the tax 00% ($) field/box appears and is checkmarked, the tax that will
be added displays in the field while the total transaction amount (including
the tax) displays in the Total ($) field.
Note: If you do not want to add the tax to this transaction, tap (unmark)
the tax 00% ($) box.
4.Capture the card data.
To swipe the card:
a.Ensure that the PAYD card reader is connected to your mobile device
(see page 21).
b.Tap Swipe.
If you need to manually enter the card data:
a.Disconnect the PAYD card reader if it is connected to your mobile device.
b.Tap Keyed.
c.In the Card Number field, enter the card number.
d.In the Exp (MMYY) field, enter the card expiry date.
•If the CVV field appears, enter the 3- or 4-digit card verification value (code).
25
5.Tap Process Transaction.
• If “Please specify a tip amount” appears, see page 26.
• If “Please swipe card” appears, swipe the card on the connected PAYD card
reader (see page 21).
• If the “Customer Signature” screen displays, capture the customer’s
signature (see page 32).
6.Wait for the APPROVED or DECLINED response to appear.
7.The transaction is complete.
• To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address
(the PAYD App will not notify you that the e-mail has been sent).
• To send an SMS text message notification, see page 34.
8.Tap
to return to the main menu.
Customer prompts in the PAYD App
To bypass adding a tip:
a.The customer taps No Tip (go directly to step 4).
3.When “Please confirm totals” appears, the customer confirms the displayed
totals and taps OK.
Note: If the customer wants to change the tip amount, they tap Back, and then
they re-enter the tip amount when prompted (see To add a different tip
as an amount or percentage on page 26; begin at step b).
4.When “Processing Transaction” or “Please swipe card” appears on your mobile
device, retrieve the device from the customer.
•If “Please swipe card” appears on your mobile device, swipe the card on the
connected PAYD card reader (see page 21).
•If the “Customer Signature” screen displays on your mobile device, capture
the customer’s signature (see page 32).
5.Wait for the APPROVED or DECLINED response to appear on your mobile device.
6.The transaction is complete.
•To e-mail a transaction receipt, see page 33.
When “Please specify a tip amount” appears on your mobile device, do the
following:
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address (the
PAYD App will not notify you that the e-mail has been sent).
1.Hand your mobile device to the customer.
•To send an SMS text message notification see page 34.
2.The customer does one of the following:
7.Tap
to return to the main menu.
To add a default tip percentage:
a.The customer taps one of the three displayed percentages.
To add a different tip as an amount or percentage:
a.The customer taps Custom Tip.
b.The customer chooses a tip type:
•To add a percentage-based tip, they tap %.
•To add a dollar-amount tip, they tap $.
c.In the Please specify tip field, the customer enters a value (percentage or
dollar amount) and taps OK.
26
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
27
Voiding/Refunding a transaction
Reverses a credit or cash transaction.
Note: If you want to reverse a credit transaction on the same day it was originally
processed, you must do a Void for the full amount.
If you want to reverse a credit transaction processed on a different day, you must
do a Refund. Credit transactions can be refunded for a full or partial amount.
Cash transactions are always reversed (refunded) for the full amount regardless
of the date on which the original transaction was processed.
1.Start on the “Reports” screen.
Note: If another screen is displayed, tap
then tap Reports.
to return to the main menu, and
2.Do one of the following:
To display the last 10 transactions processed today:
a.Leave all search fields blank, and go directly to step 3.
To narrow the scope of your search:
a.Select one or more of the following criteria:
Note: The original transaction receipt includes the transaction identifiers
submitted with the original transaction.
•Date: To retrieve transactions processed within a date range other than
today: Tap the Today drop-down list, and select a date range from the list;
otherwise, skip this step to retrieve only transactions processed today.
•Order ID: Enter the ID in the Order ID field (a full or partial ID may be
entered).
•Customer ID: Enter the ID in the Customer ID field (a full or partial ID may
be entered).
•Amount: Enter the amount in the Amount ($) field.
b.Tap Sort by, and select a sort-by option from the drop-down list.
3.Tap Search Transactions.
A transaction list appears.
•To display the next 10 transactions if applicable, tap More (to maximum
of 300).
4.Tap the transaction that you want to reverse.
5.When the transaction “Details” screen displays, confirm this is the
transaction that you want to reverse (see page 37).
Note: If this transaction is not the one you want to reverse, tap
(repeat step 4).
6.Tap Void this transaction (or tap Refund this transaction).
•If the Refund Amount ($) field appears, enter the amount to be refunded.
7.Tap Process Transaction.
•If “Please swipe card” appears, swipe the card on the connected PAYD card
reader.
8.Wait for the APPROVED or DECLINED response to appear.
9.The transaction is complete.
•To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address (the
PAYD App will not notify you that the e-mail has been sent).
•To send an SMS text message notification, see page 34.
10.Tap
to return to the main menu.
Note: Sort results by Amount, Customer ID, Date, Order ID, Card Type, or
Transaction Type.
28
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
29
Capturing a Pre-Authorization
4.Tap the “Preauth” transaction that you want to complete.
Completes a Pre-Authorization so that the funds are transferred to your account
at settlement.
5.When the transaction “Details” screen displays, confirm this is the transaction
that you want to complete (see page 37).
1.Start on the “Reports” screen.
Note: If this transaction is not the one you want to complete, tap
step 4).
N
ote: If another screen is displayed, tap
then tap Reports.
to return to the main menu, and
2.Do one of the following:
To display the last 10 transactions processed today:
a.Leave all search fields blank, and go to step 3.
To narrow the scope of your search:
a.Select one or more of the following criteria:
Note: The original transaction receipt includes the transaction identifiers
submitted with the original transaction.
•Date: To retrieve transactions processed within a date range other than
today: Tap the Today drop-down list, and select a date range from the list;
otherwise, skip this step to retrieve only transactions processed today.
•Order ID: Enter the ID in the Order ID field (a full or partial ID may be
entered).
•Customer ID: Enter the ID in the Customer ID field (a full or partial ID may
be entered).
•Amount: Enter the amount in the Amount ($) field.
(repeat
6.Tap Capture this transaction.
7.In the Capture Amount ($) field, enter the amount to be completed (captured).
Note: If the Pre-Authorization is completed for an amount that is less than the
original, the hold on the remaining amount will be released.
8.Tap Process Transaction.
9.Wait for the APPROVED or DECLINED response to appear on your mobile
device.
10.The transaction is complete.
•To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address
(the PAYD App will not notify you that the e-mail has been sent).
•To send an SMS text message notification, see page 34.
11.Tap
to return to the main menu.
b.Tap Sort by, and select a sort-by option from the drop-down list.
Note: Sort results by Amount, Customer ID, Date, Order ID, Card Type,
or Transaction Type.
3.Tap Search Transactions.
A transaction list appears.
• To display the next 10 transactions if applicable, tap More (to maximum
of 300).
30
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
31
Receipts
E-mailing a transaction receipt
Signature capture for receipts
Note: If you enabled the PAYD App to auto-send receipts to a set merchant address
(see page 13), the PAYD App automatically e-mails a receipt to the address (the PAYD
App will not notify you that the e-mail has been sent).
The “Customer Signature” screen displays on your mobile device if you are
required to capture the customer’s signature.
Note: If a signature is captured, it will not be included in e-mailed receipts; however,
a receipt with signature will be stored on Moneris PAYD Administration and can
be viewed or printed from that interface at any time (see the Using Moneris PAYD
Administration guide). A receipt with signature can also be viewed via the hyperlink
included in any SMS text message notification sent for the transaction.
The captured customer signature can also be viewed in the PAYD App when you
retrieve the transaction’s details in a Transactions Report (see page 36) or when
you are doing a Void or Refund (see page 28) or Capture (see page 30).
When the “Customer Signature” screen displays on your mobile device, do the
following:
1.Have the customer “write” their signature above the “Customer Signature”
line on the screen of your mobile device.
•If the customer wishes to redo their signature, they tap Clear and then sign
again.
3.Once the customer approves their signature, they tap Done.
4.Wait for the APPROVED or DECLINED response to appear on your mobile device.
5.The transaction is complete.
•To e-mail a transaction receipt, see page 33.
Note: If you enabled the PAYD App to auto-send receipts to a set merchant
address, the PAYD App automatically e-mails a receipt to the address (the PAYD
App will not notify you that the e-mail has been sent).
When the APPROVED or DECLINED response appears on your mobile device,
follow these steps to e-mail a transaction receipt.
1.Under “Receipt” (bottom of the screen), tap
.
2.When the “Send Receipt” screen displays, enter an e-mail address as follows:
To manually enter an e-mail address:
a.In the Email Address field, enter the address to which you want to send the
receipt.
b.Tap
.
To select an e-mail address from your mobile device’s contacts list:
N
ote: To use this feature, your mobile device’s privacy settings must be
configured to allow the PAYD App to access your device’s contacts data. (Your
mobile device may prompt you you to allow the PAYD App to access the device’s
contacts data. You must grant this access to use this feature.)
a.Tap
.
b.When the “Contacts” screen displays, tap the Firstname Lastname of the
contact to whom you want to send the receipt.
c.Tap the [email protected] (e-mail address) to which to send the receipt.
3.When “Receipt successfully sent” appears, tap OK.
4.If you want to e-mail a receipt to additional addresses, repeat steps 1 to 3
as many times as you require.
5.When you are finished, tap
to return to the main menu.
•To send an SMS text message notification, see page 34.
6.Tap
32
to return to the main menu.
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
33
Sending an SMS text message transaction
notification
When the APPROVED or DECLINED response appears on your mobile device,
follow these steps to send an SMS (short message system) text message
notification.
Note: The text message includes a hyperlink to a transaction receipt. If a customer
signature was captured for the transaction, the signature will appear on the
displayed receipt’s “SIGNATURE” line.
1.Under “Receipt” (bottom of the screen), tap
Card masking
To reduce the risk of fraudulent card use, masking and truncation are applied to
card numbers in receipts. Masking replaces a card’s numbers (except for the last
4) with “*”s (e.g., ************1234).
Truncation displays only the last 4 digits of a card (e.g., 1234). The expiry date
does not appear in any receipt.
.
2.When the “Send Receipt” screen displays, enter a phone number as follows:
To manually enter a phone number:
a.In the Phone Number field, enter the phone number to which you want
to send the SMS text message.
b.Tap
.
To select a phone number from your mobile device’s contacts list:
N
ote: To use this feature, your mobile device’s privacy settings must be
configured to allow the PAYD App to access your device’s contacts data.
(Your mobile device may prompt you to allow the PAYD App to access the
device’s contacts data. You must grant this access to use this feature.)
a.Tap
.
b.When the “Contacts” screen displays, tap the Firstname Lastname of the
contact to whom you want to send the text message.
c.Tap the (123) 456-7890 phone number to which to send the text message.
3.When “Receipt successfully sent” appears, tap OK.
4.If you want to send an SMS text message notification to additional phone
numbers, repeat steps 1 to 3 as many times as you require.
5.When you are finished, tap
34
to return to the main menu.
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
35
Reporting
4.You may do any of the following:
•To display the next 10 transactions if applicable, tap More (to maximum
of 300).
•To export the report results in CSV format in a text file, tap Export Report
(near top of screen).
Transactions Report
Search for and display transactions by date, Order ID, Customer ID, or amount.
You may also export the search results.
•To view the details of a listed transaction, tap the desired transaction
(see page 37).
1.Start on the “Reports” screen.
N
ote: If another screen is displayed, tap
then tap Reports.
Note: The file will be sent to the e-mail address that you specified in your
Export to CSV setting (see page 12).
to return to the main menu, and
5.When you are finished, tap
return to the main menu.
to return to the transaction list, or tap
to
2.Do one of the following:
To display the last 10 transactions processed today:
a.Leave all search fields blank, and go to step 3.
Details screen (transactions)
To narrow the scope of your search:
a.Select one or more of the following criteria:
The “Details” screen displays (see page 38) when you tap a transaction record
listed in a Transactions Report (e.g., you may be performing a Void, Refund,
or Capture, or simply reviewing transactions).
Note: The original transaction receipt includes the transaction identifiers
submitted with the original transaction.
Note: Line items 1 to 10 and item 16 display by default. To display line items 11
to 15, tap More Details.
•Date: To retrieve transactions processed within a date range other than
today: Tap the Today drop-down list, and select a date range from the list;
otherwise, skip this step to retrieve only transactions processed today.
•Order ID: Enter the ID in the Order ID field (a full or partial ID may be
entered).
•Customer ID: Enter the ID in the Customer ID field (a full or partial ID
may be entered).
•Amount: Enter the amount in the Amount ($) field.
b.Tap Sort by, and select a sort-by option from the drop-down list.
1.You may do one or more of the following if applicable:
•To perform a Refund or Void, continue at step 6 on page 29.
•To perform a Capture, continue at step 6 on page 31.
•To e-mail a transaction receipt, see page 33.
•To send an SMS text message notification, see page 34.
•Tap
to return to the transaction list, or tap
to return to the main menu.
Note: Sort results by Amount, Customer ID, Date, Order ID, or Card Type,
or Transaction Type.
3.Tap Search Transactions.
A transaction list appears.
36
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
37
1
Transaction name.
2
Transaction date (DD/MM/YYYY) and time
(hh:mm:ss).
3
Unique transaction identifier. Auto-generated if no
Order ID entered for transaction.
4
Card type or “Cash”.
5
Card number (masked) or “Cash”.
6
Displays if Customer ID entered for transaction.
7
Transaction amount excluding tax and tip.
8
Tax amount (see page 9).
9
Tip amount (see page 8).
10
Total amount including any tax and/or tip.
11
Transaction performed by user signed in under this
Username.
12
Moneris Host identifier (e.g., if “660123450010690030”
is the number, then “66012345” is the terminal ID
(i.e., ECR). This number may be requested by Moneris
to help track a transaction.
13
14
Transaction Response code:
•< 50: Transaction approved.
•>= 50: Transaction declined.
•NULL: Transaction was not sent for authorization.
Auth code (6-8 digits) from the card-issuing
institution.
15
Location of transaction (see page 9).
16
Customer signature (displays if captured during
transaction).
Totals (Batches) Report
1
2
3
4
5
6
7
8
9
10
Displays open and closed batch totals (sub-totals include transaction totals, tip
totals, and device ID totals) so that you can determine the amount deposited
in your back account for a batch that has been closed.
Note: Totals for a batch can be viewed from the PAYD App for up to three months
from the date a batch is closed.
1.Start on the “Totals” screen.
N
ote: If another screen is displayed, tap
then tap Totals.
2.Select a date range from the drop-down list.
3.Tap Search Batches.
•If the “Totals” screen displays listing one or more “Daily Total” records, tap
the record that you want to view.
4.When the “Daily Summary” screen displays, you may review one or more
of the following sub-reports:
11
12
13
Daily Summary Totals
For the selected date range, displays transaction types and totals grouped
by card type (or “Cash”).
.
a.To display this sub-report, tap
Tip Totals
14
15
For the selected date range, displays tip totals grouped by the PAYD Username
(Clerk ID) under which the tip amounts were accrued.
a.To display this sub-report, tap
Terminal Totals
16
For the selected date range, displays transaction types and totals (excluding
cash) grouped by batch number and terminal (ECR) ID.
5.When you are finished, tap
to the main menu.
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
.
Note: If “No tip totals for today” appears, it means no tip amounts were
accrued for the specified date range.
a.To display this sub-report, tap
38
to return to the main menu, and
.
to return to the “Totals” list, or tap
to return
39
Troubleshooting
Error messages in the PAYD App
If an error message is displayed in the PAYD App (i.e., on your mobile device)
and is listed in the table below, tap OK and then follow the instructions in
the table’s Solution column. If the problem is still not resolved, call us at
1-855-423-PAYD (7293).
Error message
Application PAYD already
exists. Replace version XXX
with version XXX.
Solution
You have already installed an earlier version of the PAYD
App.
1.Delete the unusable PAYD App from your mobile
device.
2.Download and install the latest version of the PAYD
App (see page 4).
Card Read Error. Please
swipe again.
The connected PAYD card reader could not read the card
data when the card was swiped on it.
1.Try swiping again (see page 21).
Sign In Failed.
Please Try Again.
1.Try signing in again.
Other issues
Issue
You cannot remember your sign-in password or quick
PIN.
1.Reset your password (see page 18), or reset your quick
PIN (see page 19).
The “Export Report” button
does not appear on the
“Reports” screen.
1.Set an e-mail address to receive exported reports (see
page 12).
Nothing happens when you tap
Your mobile device’s privacy settings are configured to
deny the PAYD App access your device’s contacts list,or you
do not have any contact listings stored on your device.
The “Swipe” option
does not appear on the
transaction page when
the PAYD card reader is
connected.
4.If the problem persists, redo the setup procedures
starting on page 4.
2.Redo the report and try exporting it again (the Export
Report button should now appear near the top of the
“Reports” screen).
1.Configure your device’s privacy settings to allow the PAYD
App to access to your device’s contacts list, and then
retry to access your contacts list from the PAYD App.
Your mobile device was unable to detect the PAYD card
reader connection.
Note: The Swipe option will replace the Keyed option only
if a PAYD card reader is properly connected to your mobile
device.
1.Ensure the PAYD card reader is securely connected to
your mobile device (see page 21).
2.If the text Quit Demo Mode appears at the bottom of
the sign-in screen, tap Quit Demo Mode to return to
the “live” sign-in screen, and retry signing in again.
3.If the authentication fails, use the reset password
feature (see page 18) if you are trying to sign in using
your full credentials, or use the forgot PIN feature
(see page 19) if you are trying to sign in using your
quick PIN.
Solution
2.If your mobile device has a protective sleeve, ensure
it is not preventing the PAYD card reader from being
completely plugged in.
3.When Swipe is displayed as a card entry option, tap it
and continue the transaction.
Nothing happens when
you swipe the card on the
connected PAYD card reader.
You may not have swiped the card correctly and/or the
PAYD App does not have access to your mobile device’s
microphone settings.
1.Try swiping the card again (see page 21 for correct
swipe position).
2.If this does not work ensure your mobile device is
configured to allow the PAYD App to access the device’s
microphone, and then retry swiping the card.
40
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
41
Issue
A location map does not
display on the “Details”
screen.
Solution
Your mobile device is not configured to use location
services and/or the PAYD App does not have access to
your device’s location data.
1.To enable location-mapping, see page 9.
You want to determine the
version number of the PAYD
App.
See Determining the PAYD App’s version number on
page 20.
Need help?
For telephone or e-mail assistance:
• Call us toll-free at 1-855-423-PAYD (7293), or e-mail us at [email protected]
(24 hours a day, 7 days a week).
For online troubleshooting tips, frequently asked questions (FAQ), and other help
resources:
• In the PAYD App:
1.Start on the main menu (you must be signed in).
Note: If another screen is displayed, tap to go to the main menu.
2.Tap Help.
• On the Web:
1.Visit getpayd.com/payd/support (additional copies of this guide may be
downloaded from this site).
42
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
43
Notes
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
________________________________________________________________
44
U S I N G PAY D ® F O R A P P L E ® i PA D ® , i P H O N E ® A N D i P O D T O U C H ®
45
D
Y
A
P
G
USIN
®
TM MONERIS PAYD and MONERIS PAYD BE PAYMENT READY & Design are trade-marks of Moneris Solutions Corporation.
® MONERIS and PAYD are registered trade-marks of Moneris Solutions Corporation. INTERAC is a registered trade-mark of Interac
Inc. APPLE, IPAD, IPHONE, IPOD TOUCH and APP STORE are trade-marks of Apple Inc., registered in the U.S. and other countries.
All other marks or registered trade-marks are the property of their respective owners.
© 2016 Moneris Solutions Corporation, 3300 Bloor Street West, Toronto, Ontario, M8X 2X2.
All Rights Reserved. This manual shall not wholly or in part, in any form or by any means, electronic, mechanical, including
photocopying, be reproduced or transmitted without the authorized consent of Moneris Solutions Corporation (“Moneris”). This
guide is for informational purposes only. Neither Moneris nor any of its affiliates shall be liable for any direct, indirect, incidental,
consequential or punitive damages arising out of use of any of the information contained in this guide. Neither Moneris or any of
its affiliates nor any of our or their respective licensors, licensees, service providers or suppliers warrant or make any representation
regarding the use or the results of the use of the information, content and materials contained in this guide in terms of their
correctness, accuracy, reliability or otherwise. Your credit and/or debit card processing is separately governed by the Terms and
Conditions of your Moneris VISA Merchant Agreement, your Moneris MasterCard Merchant Agreement, your Moneris Discover
Merchant Agreement and/or your INTERAC Merchant and Terminal Agreement (collectively, the “Merchant Agreements”), as
applicable with Moneris. It is the merchant’s responsibility to ensure that proper card processing procedures are followed at
all times. Please refer to your Merchant manuals and the Terms and Conditions of your Merchant Agreement(s) for details. The
Moneris Merchant Operating Manual is available for free download at getpayd.com/manuals.
For Apple® iPad®,
iPhone® and iPod touch®
PAYD_ Apl_ YT_ E (01/16)
(01/16)
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement