4610 1NR

Add to my manuals
54 Pages

advertisement

4610 1NR | Manualzz

Toshiba Global Commerce Solutions

SureMark 4610 Printers

Hardware Guide

Model 1NR

TC62-0002-00

1

Note:

Before using this information and the product it supports, be sure to read Safety Information, Warranty Information,

Uninterruptible Power Supply Information, and the information under Notices.

April 2016

This edition applies to Toshiba SureMark Printer Model 1NR.

If you send information to Toshiba Global Commerce Solutions (Toshiba), you grant Toshiba a nonexclusive right to use or distribute whatever information you supply in any way it believes appropriate without incurring any obligation to you.

©

Copyright Toshiba Global Commerce Solutions, Inc. 2016

Contents

Figures.......................................................5

Tables.........................................................7

Safety.........................................................9

About this guide..................................... 11

Who should read this guide.................................................. 11

Where to find more information...........................................11

Additional information................................................... 11

Notice statements....................................................................11

Chapter 1. Introducing the 4610

Model 1NR............................................... 13

Features and specifications....................................................13

Communication and power...................................................14

Network interface adapter prerequisites...................... 18

Operating system requirements........................................... 18

Hardware requirements.........................................................19

Understanding the controls and indicators........................ 20

Locating the power button..............................................21

Calling for service................................................................... 22

Chapter 2. Product specifications........ 25

Physical dimensions............................................................... 25

Temperature and humidity limits........................................ 26

Chapter 3. Installing and configuring the 4610 printer.......................................27

Before you begin......................................................................27

Understanding your configuration ..................................... 27

Verify your order.....................................................................27

Installing the interface card................................................... 27

Routing the cash drawer and RS-485 cables....................... 28

Installing the fillers................................................................. 30

Wall (or 45-degree) mounting............................................... 30

Chapter 4. Using and maintaining the 4610 printer.......................................35

Replenishing consumable supplies...................................... 35

Loading and replacing the paper roll............................35

Supported thermal paper................................................35

Installing large paper rolls.............................................. 36

Cleaning recommendations...................................................36

Cleaning the thermal printhead.....................................36

Retrieving printer statistics....................................................37

Notices.....................................................39

Telecommunication regulatory statement...........................40

Electronic emission notices....................................................40

Federal Communications Commission (FCC) statement............................................................................40

FCC Radiation Exposure Statement.............................. 40

Industry Canada Class A Emission Compliance statement............................................................................40

Avis de conformité à la réglementation d'Industrie Canada...........................................................41

Industry Canada Radiation Exposure Statement........ 41

European Union Electromagnetic Compatibility

(EMC) Directive Conformance Statement.................... 41

Germany Class A statement........................................... 41

Australia and New Zealand Class A statement...........42

Aviso para los usuarios de México................................ 42

People's Republic of China Class A electronic emission statement...........................................................42

Russian Electromagnetic Interference (EMI) Class

A statement....................................................................... 43

Japanese Electrical Appliance and Material

Safety Law statement.......................................................43

Japanese power line harmonics compliance statement............................................................................43

Japan Voluntary Control Council for Interference

Class A statement.............................................................43

Japan Electronics and Information Technology

Industries Association (JEITA) statement.....................43

Korean communications statement............................... 44

Taiwan Class A compliance statement..........................44

Taiwan contact information............................................ 44

Cable ferrite requirement.......................................................45

Electrostatic discharge (ESD)................................................ 45

Product recycling and disposal.............................................45

Battery safety........................................................................... 46

Battery return program.......................................................... 46

For Taiwan:........................................................................47

For the European Union:.................................................47

For California:................................................................... 48

Flat panel displays.................................................................. 48

Monitors and workstations....................................................48

Trademarks.............................................................................. 48

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

3

4

Hardware Guide for Model 1NR

Figures

1. SureMark 4610 printer........................................................13

2. USB interface card...............................................................15

3. RS-232 interface card.......................................................... 16

4. RS-485 interface card.......................................................... 16

5. Ethernet interface card....................................................... 17

6. WiFi interface card..............................................................17

7. Indicators and controls.......................................................20

8. Power button........................................................................22

9. Location of serial number.................................................. 23

10. SureMark 4610 Model 1NR dimensions........................25

11. Installing the interface card............................................. 28

12. Cash drawer cable routing...............................................29

13. RS-485 cable routing......................................................... 29

14. Installed WiFi interface with cable routing...................30

15. Position selector.................................................................31

16. Wall-mount slots............................................................... 32

17. Mount-release button....................................................... 33

18. Receipt showing usage statistics.....................................37

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

5

6

Hardware Guide for Model 1NR

Tables

1. Model feature description .................................................14

2. Communication interface, rate, and power source........15

3. OS printer interface options.............................................. 18

4. Paper supply LED indicator.............................................. 21

5. Printer ready LED indicator ............................................. 21

6. Ethernet LED indicator...................................................... 21

7. WiFi LED indicator............................................................. 21

8. Summary of dimensions.................................................... 25

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

7

8

Hardware Guide for Model 1NR

Safety

Before installing this product, read Safety Information.

Antes de instalar este produto, leia as Informações de Segurança.

Pred instalací tohoto produktu si prectete prírucku bezpecnostních instrukcí.

Læs sikkerhedsforskrifterne, før du installerer dette produkt.

Lees voordat u dit product installeert eerst de veiligheidsvoorschriften.

Ennen kuin asennat tämän tuotteen, lue turvaohjeet kohdasta Safety Information.

Avant d'installer ce produit, lisez les consignes de sécurité.

Vor der Installation dieses Produkts die Sicherheitshinweise lesen.

Prima di installare questo prodotto, leggere le Informazioni sulla Sicurezza.

Les sikkerhetsinformasjonen (Safety Information) før du installerer dette produktet.

Antes de instalar este produto, leia as Informações sobre Segurança.

Antes de instalar este producto, lea la información de seguridad.

Läs säkerhetsinformationen innan du installerar den här produkten.

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

9

10

Hardware Guide for Model 1NR

About this guide

This guide contains information about installing, using, and maintaining the Toshiba

®

SureMark

4610 Model 1NR printer.

Who should read this guide

This guide is intended for use by personnel who are installing and using the SureMark 4610

Model 1NR printers.

Where to find more information

For information on Toshiba Global Commerce Solutions products and services, start at https:// www.toshibacommerce.com. Click on the support link for information on the latest versions of

Toshiba Global Commerce Solutions documentation.

Note: Access to Toshiba online publications requires an Enterprise ID. For more information, contact your Toshiba representative, or [email protected].

Additional information

The following publications provide additional information about the SureMark 4610 Models

1NR printer:

• Click SureMark 4610 Printers: Hardware Service Guide - Models 1NR TC62-0001.

SureMark 4610 Printers: Programming Guide for Models 1xR and 2xR, TC62-0005

Notice statements

Notices in this guide are defined as follows:

Notes

These notices provide important tips, guidance, or advice.

Important

These notices provide information or advice that might help you avoid inconvenient or problem situations.

Attention

These notices indicate potential damage to programs, devices, or data. An attention notice is placed just before the instruction or situation in which damage could occur.

CAUTION

These statements indicate situations that can be potentially hazardous to you. A caution statement is placed just before the description of a potentially hazardous procedure step or situation.

DANGER

These statements indicate situations that can be potentially lethal or extremely hazardous to you. A danger statement is placed just before the description of a potentially lethal or extremely hazardous procedure step or situation.

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

11

12

Hardware Guide for Model 1NR

Chapter 1. Introducing the 4610 Model 1NR

Introducing the 4610 Model 1NR

The SureMark 4610 Printer Model 1NR is single-station thermal printer designed for ease use and service. With a print speed of 80 lines per second (LPS) and a 4-inch paper roll diameter, this high-speed printer lets you quickly print long receipts, monitor paper status, and gather printer usage statistics.

Figure 1. SureMark 4610 printer

Features and specifications

The key features of the Model 1NR include:

• Print speeds of 80 lines per second (LPS)

• One-hand paper loading with the touch of a button

• 4 inch thermal paper roll

• System management sensors that alert you to:

• Close the cover on the printer

• Replace the receipt paper

• Status of the printhead

• Printer usage statistics

• Beeper

• Quiet paper cutter

• USB, RS-232, RS-485, Ethernet, and WiFi interfaces

• 3 MB flash memory for storing messages, logos, code pages, and electronic journal data

• DBCS thermal font - 24x24 matrix

• Bar code generation

• Downloadable fonts and code pages

• Downloadable microcode

• Small footprint

• Wall mount

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

13

Color

Controls and indicators

Mounting

Operating systems

Drivers

Receipt paper loading

Receipt paper cutter

Receipt tear bar

Rotate print (line by line)

DBCS thermal font - 24x24 matrix

Table 1. Model feature description

Features

Print method

Command sets

SureMark 4610 Model 1NR

Thermal

Native, Epson emulation (RS-232, and network attached), direct, compatibility mode (Tx6/Tx7)

Communication interface

RS-232 - 115 kbps

RS-485 - 187 kbps

USB 1.1 (USB 2.0 compatible)

Ethernet - 10/100 Mbps

WiFi - 802.11 a/b/g/n/ac

Paper support

Print speed

Dot pitch

User memory

Ports

58 mm or 80 mm single- or two-color, 102 mm (4 in.) maximum outer diameter internal roll, 12 in. external supply

Up to 80 LPS (one-color)

203 dpi

3 MB Flash

DC In (except RS-485), USB/Powered USB or RS-232 or RS-485 (24 V or 38

V) or Ethernet (interface card-specific), OEM cash drawer (+24 V)

Power options

System Unit: 24 V or 38 V (interface card-specific)

Brick: 24 V

Iron gray or pearl white (two-tone color not provided)

Cover Open, Paper Feed, Beeper, Status LED (bi-color), Paper Status LED,

Power Switch

Integrated (Integration tray), Distributed (free standing), Wall mount

POSReady 2009, POSReady 7, Windows 7, Windows 8.1, Windows 10, 4690

OS, Linux, iOS, Android

Native Windows, UPOS (OPOS and JavaPOS ™ ), 4690 OS

Drop and load

Standard

Yes

Yes

Yes

Communication and power

An interface card is shipped with the SureMark 4610

in Table 2.

™ printers to provide communication to the system unit. Depending on your connectivity requirements, you will have one of the cards listed

14

Hardware Guide for Model 1NR

Table 2. Communication interface, rate, and power source

Device

USB

RS-485

Description

USB is 2.0 Compliant Full Speed

HID; Bulk transfers at 12 Mbps

(Mega bits per second)

Toshiba proprietary

RS-232

Power

®

System unit input voltage (+24 V); separate power supply if standard

USB connector is used

System unit input voltage +38 V or

+24 V (Japan only)

Separate power supply

Ethernet

WiFi

9.6K - 115.2K (selectable using offline or online configuration) Baud rate

10/100 Ethernet port for connection to an industry standard Ethernet

LAN

801.11 a/b/g/n/ac Wireless LAN

Adapter

Separate power supply

Separate power supply

Figure 2 illustrates the different communications connections on the USB interface card.

A B C D

Figure 2. USB interface card

Device

A

B

C

D

Description

Cash drawer

Powered USB

Standard USB

Power supply

Figure 3 illustrates the communications connections on the RS-232 interface card.

Chapter 1. Introducing the 4610 Model 1NR

15

E F G

Figure 3. RS-232 interface card

Device

E

F

G

Description

Cash drawer

RS-232

Power supply

Figure 4 illustrates the communications connections on the RS-485 interface card.

H I

Figure 4. RS-485 interface card

Device

H

I

Description

Cash drawer

RS-485

Figure 5 illustrates the communications connections on the Ethernet interface card.

16

Hardware Guide for Model 1NR

J K L M

Figure 5. Ethernet interface card

Device

J

K

L

M

Description

Cash drawer

Ethernet

Ethernet status indicators

Power supply

Figure 6 illustrates the communications connections on the WiFi interface card:

• Frequency Band of 802.11 b/g/n - 2.4 Ghz, power 18.30 dBm

• Frequency Band of 802.11 a/n/ac - 5 Ghz, power 19.12dBm

N O P

Q

Figure 6. WiFi interface card

Device

N

O

Description

WiFi

WiFi status indicator

Chapter 1. Introducing the 4610 Model 1NR

17

Device

P

Q

Description

Cash drawer

Power supply

Network interface adapter prerequisites

The network interface adapters (Ethernet and WiFi) have dependencies on the level of the printer and printer firmware.

• The printer manufacturing date must be after June 10, 2013. Printers built prior to this date have an older level main logic card (MLC) that will not support these adapters. The manufacturing date is located under the paper cover above the serial number label (see

“Calling for service” on page 22).

• Firmware level 14 and above is required for an Ethernet interface adapter.

• Firmware level 18 and above is required for a WiFi interface adapter. EC firmware level 17.xx will enable basic function, but will not match the function that is described in this manual.

These firmware levels will print a message as part of a test receipt that indicates the firmware should be upgraded.

Note: The required firmware levels referenced above will not allow back leveling to a version that does not fully support the installed adapter.

Important: If a network interface adapter is installed in a printer and the printer has back level firmware or a MLC that does not support it, the printer will indicate an error:

• The ready light will blink amber with the internal LED#2, which indicates that the printer firmware is back level. If the firmware is known to be at the minimum level identified, then this condition indicates a failed adapter or other HW problem.

• A message is printed in the receipt station that the MLC card does not support network adapters, which indicates that the MLC is back level and cannot be used with the installed adapter.

Operating system requirements

You can download drivers from the Toshiba Global Commerce Solutions support website: www.toshibacommerce.com/support.

The printer provides a compatibility mode to enable use of older drivers and applications with only minor modifications. The default operating system is referred to as "Native Mode. "Native

Mode" provides functional enhancements and is supported by the most current applications and drivers.

Operating system requirements includes a list of the printer interface options that are supported for each OS/Driver combination.

Table 3. OS printer interface options

4690

OS

4690 API

USB

RS485

JavaPOS

Drivers 1.14.0

or later

All

Driver/API

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later

OPOS

Drivers 1.14.0

or later Direct IO

18

Hardware Guide for Model 1NR

OS

POSReady

2009

Windows 7

POSReady 7

Windows

Embedded 8.1

Pro/Industry

(64-bits only)

Windows 8.1

Pro/Enterprise

(64-bits only)

Windows 10

Pro/Enterprise

SUSE Linux

Enterprise 11

SP1 (SLE 11)

PC DOS 2000

4690 API

JavaPOS

Drivers 1.14.0

or later

All

OPOS

Drivers 1.14.0

or later

All

Driver/API

OPOS

Drivers 1.14.0

or later

All

OPOS

Drivers 1.14.0

or later

USB

RS232

Ethernet

WiFi

Direct IO

RS232

Ethernet

WiFi

All All All

USB

RS232

Ethernet

WiFi

RS232

Ethernet

WiFi

All All All

USB

RS232

Ethernet

WiFi

RS232

Ethernet

WiFi

All All All

USB

RS232

Ethernet

WiFi

RS232

Ethernet

WiFi

All All All

USB

RS232

Ethernet

WiFi

RS232

Ethernet

WiFi

All All All

USB

RS232

Ethernet

WiFi

RS232

Ethernet

WiFi

All

RS232

Ethernet

WiFi

RS232

Note:

1. Toshiba 4610 Ethernet Printer iOS SDK is supported with iOS 8.x or later for use with the

Ethernet and WiFi interface adapters.

2. Toshiba 4610 Ethernet Printer Android SDK is supported with Android 4.0 or later for use with the Ethernet and WiFi interface adapters.

3. Only those items listed are supported.

Hardware requirements

SureMark printers work with the following systems:

Chapter 1. Introducing the 4610 Model 1NR

19

• 4694 systems

• 4695 systems (RS-232 connection only and with power supply)

• PC or other store controller with an RS-232, Ethernet, WiFi, or USB port

• SurePOS

100 Series systems

• SurePOS 300 Series systems

• SurePOS 500 Series systems

• SurePOS 700 Series systems

• Self Checkout solution

• AnyPlace ™ Kiosk

• TCx ™ Wave

• TCx700

• TCx300

• TCxFlight

• iOS, Android, and Windows mobile devices

Understanding the controls and indicators

This section describes the controls and indicators.

A

B

C

D

Figure 7. Indicators and controls

Device

A

B

C

20

Hardware Guide for Model 1NR

Description

Paper feed button; press to advance the customer receipt paper.

Paper supply LED indicator. See Table 4

Printer ready LED indicator. See Table 5

Device

D

Table 4. Paper supply LED indicator

LED indicator ( 

B

)

Amber On

Off

Blinking

Description

Paper door release button

Paper out

Paper sufficient

Critically low paper supply

Table 5. Printer ready LED indicator

Printer ready ( 

C

)

Amber

Green

Blinking (0.5s

on / 0.5s off)

Blipping (0.25s

on / 1.75s off)

On

Station not ready; recoverable error - paper jam, cover open, cutter jam

Offline or hardware failure: Cannot communicate with paper motion sensor or the thermal printhead; MLC or IFC problem

Station is ready

Table 6 describes the Ethernet LED indicators that reflect printer status.

Table 6. Ethernet LED indicator

Color

Green

Amber

State

Off - No link

On - Good link

Blinking - Network activity

Off - 10 MB mode

On - 100 MB mode

Function

Ethernet Good Link / Activity

Ethernet 10/100Mb

Table 7 describes the indicators that reflect the status of the WiFi connection.

Table 7. WiFi LED indicator

Color

Amber

State

Off - No link

On - Link up

Function

WiFi connected

Locating the power button

The power button ( 

A

in Figure 8) for the 4610 Model 1NR is located under the paper door.

Chapter 1. Introducing the 4610 Model 1NR

21

A

Figure 8. Power button

Calling for service

When you call Toshiba for warranty information or service, be sure to have the serial number and model number of the printer available. The serial number and model number are located beside the flipper door (see  

A

in Figure 9).

22

Hardware Guide for Model 1NR

Figure 9. Location of serial number

A

Chapter 1. Introducing the 4610 Model 1NR

23

24

Hardware Guide for Model 1NR

Chapter 2. Product specifications

Product specifications

This section describes the physical specifications for models 1NR.

Physical dimensions

Figure 10 describes the physical dimensions.

159 mm

(6.26 in)

177 mm

(6.97 in)

Figure 10. SureMark 4610 Model 1NR dimensions

Table 8. Summary of dimensions

Width:

Height:

Depth:

Weight:

145 mm (5.71 in.) footprint

Cover closed: 159 mm (6.26 in.)

Cover open: 260 mm (10.24 in.)

177 mm (6.97 in.)

1.4 kg (3.09 lb)

145 mm

(5.71 in)

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

25

Temperature and humidity limits

Shipping

-40° to 60° C (-40° to 140° F) with 5% to 100% relative humidity including condensation, but excluding rain

Storage

0° to 60° C (32° to 140° F) with 5% to 80% relative humidity

Operating

5° to 40° C (42.8° to 104° F) with 8% to 80% relative humidity

26

Hardware Guide for Model 1NR

Chapter 3. Installing and configuring the 4610 printer

Installing and configuring the 4610 printer

This section provides safety information and steps on installing your printer.

Before you begin

Before you install your SureMark printer, be sure to read this section and the Safety Information guide.

Understanding your configuration

Your printer can be set up in either an integrated or distributed configuration. An integrated configuration is one in which all parts of a system are assembled in one location. A distributed configuration is one in which you set up parts of the system in different physical locations. In an integrated configuration, you install the printer on the input/output tray option with the fillers to contain the printer and display on top of the wide-footprint system units. Other tray options include mounting the printer on the full-size cash drawer or directly on the counter.

Verify your order

Each order contains the following:

• 4610 unit

• Interface card (RS-232, RS-485, USB, WiFi, or Ethernet)

• Safety manual

• Warranty statement

• Customer options, such as fillers, cables, and power bricks (packaged separately)

Installing the interface card

The interface card (either an RS-232, RS-485, USB, Ethernet, or WiFi interface) is shipped in a separate box with your printer. Install the interface card as follows:

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

27

B

A

Figure 11. Installing the interface card

1. As shown in Figure 11, place the printer unit upside down.

2. Insert the tab of the interface card ( 

A

) into the slot on the base of the printer ( 

B

).

3. Press down on the side of the interface card opposite the tab until the blue release button slider snaps into place.

4. Connect the printer with your system unit or network (RS-232, RS-485, USB, or Ethernet connector).

Note:

1. You might prefer to plug all cables into the interface card before installation; however,

do not plug in any power until after installation.

2. If you are using an RS-485 interface card, see “Routing the cash drawer and RS-485 cables” on page 28.

5. If you have a power cord, connect it to the printer.

Routing the cash drawer and RS-485 cables

To route the cash drawer and RS-485 cables together through the back cable slot:

1. Route the cash drawer cable through the cable slot ( 

A

in Figure 12).

28

Hardware Guide for Model 1NR

A

Figure 12. Cash drawer cable routing

2. Route the RS-485 cable (see Figure 13).

1. Place the RS485 cable completely down on the base  

B

.

2. Route the cable under the notch  

C

.

3. Route the RS485 cablle through the back cable slot  

B

and  

C

(this is the only possible route).

B C D

Figure 13. RS-485 cable routing

Chapter 3. Installing and configuring the 4610 printer

29

Figure 14. Installed WiFi interface with cable routing

Installing the fillers

The fillers are an important part of your integrated system. They securely position your printer into position with the system unit and other peripherals.

Refer to the installation documentation for your system unit for complete instructions.

Wall (or 45-degree) mounting

Attention: Printer must be powered off. The following ESD handling procedure is recommended: You should touch the metal on the printer frame with the back of your hand

before making contact with the printer. Also, see “Electrostatic discharge (ESD)” on page 45.

Follow these steps to wall (or 45-degree) mount the printer unit:

1. Turn off the power to the 4610.

2. Roll the bottom position selector (part of the low-paper sensor;  

A

in Figure 15) to the

WALL position.

30

Hardware Guide for Model 1NR

A

Figure 15. Position selector

3. Align the two rounded slots on the base of the printer unit ( 

A

in Figure 16 ) with the two

D-shaped posts on the mount. Also, ensure that the hook near the corner of the mount aligns with the slot at the corner of the printer unit ( 

B

).

Chapter 3. Installing and configuring the 4610 printer

31

B

A

Figure 16. Wall-mount slots

4. Slide the printer unit down (or up) until the mount-release button snaps into place.

To remove the printer unit from the wall mount:

1. Press the door-release button ( 

D

in Figure 7) and pull (or push) the door fully open.

2. While pushing the mount-release button ( 

B

in Figure 17) lift (or lower) the printer unit off

of the mount posts and hook.

32

Hardware Guide for Model 1NR

B

Figure 17. Mount-release button

Chapter 3. Installing and configuring the 4610 printer

33

34

Hardware Guide for Model 1NR

Chapter 4. Using and maintaining the 4610 printer

Using and maintaining the 4610 printer

This section contains information about the proper use and maintenance of the 4610 Model 1NR.

For detailed technical information, see Chapter 2, Product specifications on page 25.

Attention: All covers must be installed on the SureMark printer during operation.

Replenishing consumable supplies

You are responsible for replenishing consumable supplies, which include the paper rolls.

Make sure that you are using the recommended supplies for the 4610 printer, which are described in the following sections.

Loading and replacing the paper roll

Ensure that you have the correct paper for the 4610. See “Supported thermal paper” on page

35.

1. Press and release the blue release button to release the paper door. In a wall-mount configuration, you must also pull the door fully open, because of the brake feature that decelerates it from the full force of gravity.

2. If necessary, remove any unused paper or the empty paper roll core before inserting a new paper roll.

Note: Refer to the label inside the printer for a diagram of how to load paper.

3. Place the paper roll into the paper roll bucket as shown on the diagram. The leading edge of the paper should come from the bottom of the roll as shown in the diagram.

Note: The thermal printhead will not print on paper with glue on it. If the new paper roll was sealed by glue, tear off the 6 to 8 inches of paper with glue on it before loading it.

4. Close the paper cover.

5. Press the customer receipt feed button to advance the paper, to verify that the paper is feeding correctly. Feed 30 cm (about 1 ft) of paper through to test for correct alignment.

Attention: Do not pull the receipt paper out of the printer with the paper access cover closed.

This disengages the paper feed. The paper feed motor must then catch up before the printer can feed the paper, which causes missing lines or partial lines of print. Use the customer receipt feed button to advance the receipt and all lines will print.

Supported thermal paper

Attention: Using an inferior grade of paper can affect print quality as well as the life of printheads and the printer mechanism.

Note: When selecting a paper, ensure that the paper's archive life meets the requirements of the tax authorities of your country for archiving tax-related data.

The paper used in the thermal receipt station must meet the following requirements:

Width

79.5 ± 0.5 mm (3.13 ± 0.02 in.) or 57.5 ± 0.5 mm (2.26 ± 0.02 in.)

Outside Diameter

102 mm (4.0 in.) maximum

Thickness

60 μm (0.00225 in.) optimal. Range: 41 μm minimum to 99 μm maximum.

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

35

Important: Paper has a significant manufacturing tolerance, and nominal paper designations do not reflect actual measurements. The manufacturing tolerance must fall within the published operating thickness range. Customers should test paper in their specific configuration before use. The intent of this specification is that if any spot measurement of the paper is outside the specified range, the paper is deemed not to meet the specification and the customer is responsible for any problems caused by paper jams.

The paper must be wound with the printing side facing out. The paper should not be attached to the core in any manner.

Important:

Printer reliability and performance are directly related to the quality of the supplies used by the customer. The published parameters for printer performance are established using supplies that meet the specifications listed above.

Thermal paper with watermarks, coupons, or advertisements printed on the front or back of the paper is not covered by Toshiba specifications. Some inks and printing processes work acceptably, but others do not. Printer problems that are caused by supplies that do not meet

Toshiba specifications might result in a billable service call, regardless of the existence of a service contract.

Installing large paper rolls

The 4610 can accommodate extra-large rolls (up to 15 in.) of paper below the printer. Mounting hardware is necessary to avoid placing undue strain on the paper feed motor. See your Toshiba representative for additional information.

Cleaning recommendations

You should inspect your 4610 unit periodically and clean the cover as required. Use a soft, clean cloth with warm, soapy water to clean the plastic parts. Do not use abrasives or any alkaline, ammonia, or chloride-based cleaner.

Note: Do not apply cleaning solution directly to the cover. Always apply the cleaner to a clean cloth and then wipe the cover with the damp cloth. Be certain that the cloth is only damp and not dripping wet.

Cleaning the thermal printhead

The thermal printhead should be cleaned at regular intervals or when the print quality has noticeably deteriorated. There are many factors that affect cleaning frequency. Poor paper quality, high printer usage, or a dirty environment are all reasons to clean the thermal printhead more often. Complete the following steps to clean the thermal printhead:

1. Open the paper cover.

2. Using a cotton swab soaked in isopropyl alcohol, gently wipe the printhead several times on its print line and on the surrounding area.

3. Wipe off any residual alcohol with a dry swab.

If print quality does not improve after cleaning the thermal printhead, call for service to replace the thermal printhead unit.

Note: The type of paper used and the usage rate will increase wear on the thermal printhead.

36

Hardware Guide for Model 1NR

Retrieving printer statistics

The Model 4610 2CR and 2NR printers retain usage statistics to help you evaluate your printer usage and performance. The statistics available for your printer are defined during printer

configuration. Figure 18 is an example of a printed receipt with usage statistics for the Model

1NR.

Figure 18. Receipt showing usage statistics

In addition to the Usage Statistics, the printer stores statistics on errors or unexpected events for use in predicating problems. See the SureMark Printers: Programming Guide for Models 1xR and

2xR, GA27-5005 for commands to retrieve this data.

The available statistics for the 4610 1NR printer include:

• Number of Failed Flash Writes

• Unexpected Cover Open Count

• Thermal Print Head element failure

• Printer serial number

• Manufacturing Week Code

• Number of paper cuts

• Number of characters printed on the CR (thermal) station

Chapter 4. Using and maintaining the 4610 printer

37

• Number of steps performed by the CR paper feed motor (200 steps per inch of paper)

• Number of times the customer receipt cover was opened

• Number of failed paper cuts

• Number of Flash Erase commands performed (NVRAM write count)

• Cash drawer opened successfully count

• Cash drawer failed to opened count

• Number of bar codes printed

• Number of times the max temperature of either the motors or the print heads have been reached

38

Hardware Guide for Model 1NR

Notices

This information was developed for products and services offered in the U.S.A.

Toshiba Global Commerce Solutions may not offer the products, services, or features discussed in this document in other countries. Consult your local Toshiba Global Commerce Solutions representative for information on the products and services currently available in your area. Any reference to a Toshiba Global Commerce Solutions product, program, or service is not intended to state or imply that only that Toshiba Global Commerce Solutions product, program, or service may be used. Any functionally equivalent product, program, or service that does not infringe any Toshiba Global Commerce Solutions intellectual property right may be used instead.

However, it is the user's responsibility to evaluate and verify the operation of any non-Toshiba

Global Commerce Solutions product, program, or service.

Toshiba Global Commerce Solutions may have patents or pending patent applications covering the subject matter in this document. The furnishing of this document does not give you any license to these patents. You can send license inquiries, in writing, to:

Toshiba Global Commerce Solutions

Attn: General Counsel

3901 South Miami Blvd.

Durham, NC 27703

United States of America

The following paragraph does not apply to the United Kingdom or any other country where such provisions are inconsistent with local law: TOSHIBA GLOBAL COMMERCE SOLUTIONS

PROVIDES THIS PUBLICATION "AS IS" WITHOUT WARRANTY OF ANY KIND, EITHER

EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES

OF NON-INFRINGEMENT, MERCHANTABILITY, OR FITNESS FOR A PARTICULAR

PURPOSE. Some states do not allow disclaimer of express or implied warranties in certain transactions, therefore, this statement may not apply to you.

This information could include technical inaccuracies or typographical errors. Changes are periodically made to the information herein; these changes will be incorporated in new editions of the publication. Toshiba Global Commerce Solutions may make improvements and/or changes in the product(s) and/or program(s) described in this publication at any time without notice.

Toshiba Global Commerce Solutions may use or distribute any of the information you supply in any way it believes appropriate without incurring any obligation to you.

Any references in this information to non-Toshiba Global Commerce Solutions Web sites are provided for convenience only and do not in any manner serve as an endorsement of those Web sites. The materials at those Web sites are not part of the materials for this Toshiba Global

Commerce Solutions product and use of those Web sites is at your own risk.

Information concerning non-Toshiba Global Commerce Solutions products was obtained from the suppliers of those products, their published announcements or other publicly available sources. Toshiba Global Commerce Solutions has not tested those products and cannot confirm the accuracy of performance, compatibility or any other claims related to non-Toshiba Global

Commerce Solutions products. Questions on the capabilities of non-Toshiba Global Commerce

Solutions products should be addressed to the suppliers of those products.

This information is for planning purposes only. The information herein is subject to change before the products described become available.

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

39

Telecommunication regulatory statement

This product is not intended to be connected directly or indirectly by any means whatsoever to interfaces of public telecommunications networks, nor is it intended to be used in a public services network.

Electronic emission notices

When you attach a monitor to the equipment, you must use the designated monitor cable and any interference suppression devices that are supplied with the monitor.

Federal Communications Commission (FCC) statement

This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference, in which case the user will be required to correct the interference at his own expense. There is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

1. Reorient or relocate the receiving antenna.

2. Increase the separation between the equipment and receiver

3. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.

4. Consult the dealer or experienced radio TV technician for help.

Properly shielded and grounded cables and connectors must be used in order to meet FCC emission limits. Toshiba Global Commerce Solutions is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment. Unauthorized changes or modifications could void the user's authority to operate the equipment.

This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and

2. This device must accept any interference received, including interference that may cause undesired operation.

FCC Radiation Exposure Statement

To comply with the FCC RF exposure compliance requirements, the separation distance between the antenna and the body of all persons must be at least 20 cm (8 inches).

Industry Canada Class A Emission Compliance statement

This Class A digital apparatus complies with Canadian ICES-003 and RSS247.

Operation is subject to the following two conditions:

1. This device may not cause interference.

2. This device must accept any interference, including interference that may cause undesired operation of the device.

40

Hardware Guide for Model 1NR

Avis de conformité à la réglementation d'Industrie Canada

Cet appareil numérique de la classe A est conforme aux normes NMB-003 et RSS247 du Canada.

Le fonctionnement est soumis aux conditions suivantes :

1. Ce périphérique ne doit pas causer d’interférences;

2. Ce périphérique doit accepter toutes les interférences reçues, y compris celles qui risquent d’entraîner un fonctionnement indésirable.

Industry Canada Radiation Exposure Statement

This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with a minimum distance of 20 cm (8 inches) from the body of all persons.

European Union Electromagnetic Compatibility (EMC) Directive

Conformance Statement

This product is in conformity with the protection requirements of EU Council Directive

2004/108/EC on the approximation of the laws of the Member States relating to electromagnetic compatibility. Toshiba Global Commerce Solutions cannot accept responsibility for any failure to satisfy the protection requirements resulting from a non-recommended modification of the product, including the fitting of non-Toshiba Global Commerce Solutions option cards.

This product has been tested and found to comply with the limits for Class A Information

Technology Equipment according to CISPR 22/European Standard EN 55022. The limits for Class

A equipment were derived for commercial and industrial environments to provide reasonable protection against interference with licensed communication equipment.

Attention: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Responsible manufacturer:

Toshiba Global Commerce Solutions

3901 South Miami Blvd.

Durham, NC 27703

United States of America

European Community contact:

Toshiba Global Commerce Solutions, Inc.

Brand Manager - Europe, Middle East & Africa

Toshiba Court, Weybridge Business Park, Addlestone Road, Weybridge, Surrey, KT15 2UL, UK

Germany Class A statement

Deutschsprachiger EU Hinweis: Hinweis für Geräte der Klasse A EU-Richtlinie zur

Elektromagnetischen Verträglichkeit

Dieses Produkt entspricht den Schutzanforderungen der EU-Richtlinie 2004/108/EG zur

Angleichung der Rechtsvorschriften über die elektromagnetische Verträglichkeit in den EU-

Mitgliedsstaaten und hält die Grenzwerte der EN 55022 Klasse A ein.

Um dieses sicherzustellen, sind die Geräte wie in den Handbüchern beschrieben zu installieren und zu betreiben. Des Weiteren dürfen auch nur von der Toshiba Global Commerce Solutions empfohlene Kabel angeschlossen werden. Toshiba Global Commerce Solutions übernimmt keine

Verantwortung für die Einhaltung der Schutzanforderungen, wenn das Produkt ohne

. Notices

41

Zustimmung der Toshiba Global Commerce Solutions verändert bzw. wenn

Erweiterungskomponenten von Fremdherstellern ohne Empfehlung der Toshiba Global

Commerce Solutions gesteckt/eingebaut werden.

EN 55022 Klasse A Geräte müssen mit folgendem Warnhinweis versehen werden: “Warnung:

Dieses ist eine Einrichtung der Klasse A. Diese Einrichtung kann im Wohnbereich Funk-

Störungen verursachen; in diesem Fall kann vom Betreiber verlangt werden, angemessene

Maβnahmen zu ergreifen und dafür aufzukommen.”

Deutschland: Einhaltung des Gesetzes über die elektromagnetische Verträglichkeit von

Geräten

Dieses Produkt entspricht dem “Gesetz über die elektromagnetische Verträglichkeit von Geräten

(EMVG)”. Dies ist die Umsetzung der EU-Richtlinie 2004/108/EG in der Bundesrepublik

Deutschland.

Zulassungsbescheinigung laut dem Deutschen Gesetz über die elektromagnetische

Verträglichkeit von Geräten (EMVG) (bzw. der EMC EG Richtlinie 2004/108/EG) für Geräte der Klasse A

Dieses Gerät ist berechtigt, in Übereinstimmung mit dem Deutschen EMVG das EG-

Konformitätszeichen - CE - zu führen.

Verantwortlich für die Einhaltung der EMV Vorschriften ist der Hersteller:

Toshiba Global Commerce Solutions

3901 South Miami Blvd.

Durham, NC 27703

United States of America

Der verantwortliche Ansprechpartner des Herstellers in der EU ist:

Toshiba Global Commerce Solutions, Inc.

Brand Manager - Europe, Middle East & Africa

Toshiba Court, Weybridge Business Park, Addlestone Road, Weybridge, Surrey, KT15 2UL, UK

Generelle Informationen:

Das Gerät erfüllt die Schutzanforderungen nach EN 55024 und EN 55022 Klasse A.

Australia and New Zealand Class A statement

Attention: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

Aviso para los usuarios de México

La operación de este equipo está sujeta a las siguientes dos condiciones:

1. Es posible que este equipo o dispositivo no cause interferencia prejudicial.

2. Este equipo o dispositivo debe aceptar cualquier interferencia. Incluyendo la que pueda causar su operación no deseada.

Para saber el modelo de la tarjeta inalámbrica utilizada, revise la etiqueta regulatoria de la impresora.

People's Republic of China Class A electronic emission statement

Attention: This is a Class A product. In a domestic environment this product may cause radio interference, in which case the user may be required to take adequate measures.

42

Hardware Guide for Model 1NR

Russian Electromagnetic Interference (EMI) Class A statement

Japanese Electrical Appliance and Material Safety Law statement

Japanese power line harmonics compliance statement

Japan Voluntary Control Council for Interference Class A statement

Attention: This is a Class A product based on the standard of the Voluntary Control Council for

Interference (VCCI). If this equipment is used in a domestic environment, radio interference may occur, in which case, the user may be required to take corrective actions.

Japan Electronics and Information Technology Industries

Association (JEITA) statement

. Notices

43

Japan Electronics and Information Technology Industries Association (JEITA) Confirmed

Harmonics Guidelines with Modifications (products greater than 20 A per phase).

Korean communications statement

This is electromagnetic wave compatibility equipment for business (Type A). Sellers and users need to pay attention to it. This is for any areas other than home.

Taiwan Class A compliance statement

Taiwan contact information

Toshiba Global Commerce Solutions Taiwan Product Service Contact Info:

Toshiba Global Commerce Solutions, Inc.

44

Hardware Guide for Model 1NR

Rm. 1, 5F., No.3-2, Park St., Nangang Dist., Taipei City, Taiwan

Telephone: 0800-001-939

Cable ferrite requirement

All cable ferrites are required to suppress radiated EMI emissions and must not be removed.

Electrostatic discharge (ESD)

Attention: Electrostatic discharge (ESD) damage can occur when there is a difference in charge between the part, the product, and the service person. No damage will occur if the service person and the part being installed are at the same charge level.

ESD damage prevention

Anytime a service action involves physical contact with logic cards, modules, back-panel pins, or other ESD sensitive (ESDS) parts, the service person must be connected to an ESD common ground point on the product through the ESD wrist strap and cord.

The ESD ground clip can be attached to any frame ground, ground braid, green wire ground, or the round ground prong on the AC power plug. Coax or connector outside shells can also be used.

Handling removed cards

Logic cards removed from a product should be placed in ESD protective containers. No other object should be allowed inside the ESD container with the logic card. Attach tags or reports that must accompany the card to the outside of the container.

Product recycling and disposal

This unit must be recycled or discarded according to applicable local and national regulations.

Toshiba Global Commerce Solutions encourages owners of information technology (IT) equipment to responsibly recycle their equipment when it is no longer needed. Toshiba Global

Commerce Solutions offers a variety of product return programs and services in several countries to assist equipment owners in recycling their IT products. Information on Toshiba

Global Commerce Solutions product recycling offerings can be found on the Toshiba Global

Commerce Solutions product recycling programs website.

Español: Esta unidad debe reciclarse o desecharse de acuerdo con lo establecido en la normativa nacional o local aplicable. Toshiba Global Commerce Solutions recomienda a los propietarios de equipos de tecnología de la información (TI) que reciclen responsablemente sus equipos cuando

éstos ya no les sean útiles. Toshiba Global Commerce Solutions dispone de una serie de programas y servicios de devolución de productos en varios países, a fín de ayudar a los propietarios de equipos a reciclar sus productos de TI. Se puede encontrar información sobre las ofertas de reciclado de productos de Toshiba Global Commerce Solutions en el sitio web Toshiba

Global Commerce Solutions product recycling programs.

Note: This mark applies only to countries within the European Union (EU) and Norway.

Appliances are labeled in accordance with European Directive 2002/96/EC concerning waste electrical and electronic equipment (WEEE). The Directive determines the framework for the return and recycling of used appliances as applicable throughout the European Union. This label is applied to various products to indicate that the product is not to be thrown away, but rather reclaimed upon end of life per this Directive.

. Notices

45

Remarque : Cette marque s’applique uniquement aux pays de l’Union Européenne et à la

Norvège. L’etiquette du système respecte la Directive européenne 2002/96/EC en matière de

Déchets des Equipements Electriques et Electroniques (DEEE), qui détermine les dispositions de retour et de recyclage applicables aux systèmes utilisés à travers l’Union européenne.

Conformément à la directive, ladite étiquette précise que le produit sur lequel elle est apposée ne doit pas être jeté mais être récupéré en fin de vie.

In accordance with the European WEEE Directive, electrical and electronic equipment (EEE) is to be collected separately and to be reused, recycled, or recovered at end of life. Users of EEE with the WEEE marking per Annex IV of the WEEE Directive, as shown above, must not dispose of end of life EEE as unsorted municipal waste, but use the collection framework available to customers for the return, recycling, and recovery of WEEE. Customer participation is important to minimize any potential effects of EEE on the environment and human health due to the potential presence of hazardous substances in EEE. For proper collection and treatment, contact your local Toshiba Global Commerce Solutions representative.

Disposal of IT products should be in accordance with local ordinances and regulations.

Battery safety

FG:

!"#$%&。()*+, -./0"#1234"。

-.:6"#78198:;、6"#=>?

100°C (212°F)

@A、BC1DE。

(C003)

Caution: Risk of explosion if battery is replaced by an incorrect type. Dispose of used batteries according to the instructions.

Battery return program

This product may contain sealed lead acid, nickel cadmium, nickel metal hydride, lithium, or lithium ion battery. Consult your user manual or service manual for specific battery information.

The battery must be recycled or disposed of properly. Recycling facilities may not be available in

46

Hardware Guide for Model 1NR

your area. For information on disposal of batteries outside the United States, go to the Battery disposal website or contact your local waste disposal facility.

For Taiwan:

Please recycle batteries.

For the European Union:

Notice: This mark applies only to countries within the European Union (EU)

Batteries or packaging for batteries are labeled in accordance with European Directive

2006/66/EC concerning batteries and accumulators and waste batteries and accumulators. The

Directive determines the framework for the return and recycling of used batteries and accumulators as applicable throughout the European Union. This label is applied to various batteries to indicate that the battery is not to be thrown away, but rather reclaimed upon end of life per this Directive.

Les batteries ou emballages pour batteries sont étiquetés conformément aux directives européennes 2006/66/EC, norme relative aux batteries et accumulateurs en usage et aux batteries et accumulateurs usés. Les directives déterminent la marche à suivre en vigueur dans l'Union

Européenne pour le retour et le recyclage des batteries et accumulateurs usés. Cette étiquette est appliquée sur diverses batteries pour indiquer que la batterie ne doit pas être mise au rebut mais plutôt récupérée en fin de cycle de vie selon cette norme.

. Notices

47

In accordance with the European Directive 2006/66/EC, batteries and accumulators are labeled to indicate that they are to be collected separately and recycled at end of life. The label on the battery may also include a chemical symbol for the metal concerned in the battery (Pb for lead,

Hg for mercury and Cd for cadmium). Users of batteries and accumulators must not dispose of batteries and accumulators as unsorted municipal waste, but use the collection framework available to customers for the return, recycling and treatment of batteries and accumulators.

Customer participation is important to minimize any potential effects of batteries and accumulators on the environment and human health due to the potential presence of hazardous substances. For proper collection and treatment, contact your local Toshiba Global Commerce

Solutions representative.

This notice is provided in accordance with Royal Decree 106/2008 of Spain: The retail price of batteries, accumulators and power cells includes the cost of the environmental management of their waste.

For California:

Perchlorate material – special handling may apply

Refer to www.dtsc.ca.gov/hazardouswaste/perchlorate.

The foregoing notice is provided in accordance with California Code of Regulations Title 22,

Division 4.5, Chapter 33: Best Management Practices for Perchlorate Materials. This product/part includes a lithium manganese dioxide battery which contains a perchlorate substance.

Flat panel displays

The fluorescent lamp in the liquid crystal display contains mercury. Dispose of it as required by local ordinances and regulations.

Monitors and workstations

Connecticut: Visit the website of the Department of Energy & Environmental Protection at www.ct.gov/deep for information about recycling covered electronic devices in the State of

Connecticut, or telephone the Connecticut Department of Environmental Protection at

1-860-424-3000.

Oregon: For information regarding recycling covered electronic devices in the state of Oregon, go to the Oregon Department of Environmental Quality site at www.deq.state.or.us/kj/ electronics.htm.

Washington: For information about recycling covered electronic devices in the State of

Washington, go to the Department of Ecology Website at fortress.wa.gov/ecy/recycle/ or telephone the Washington Department of Ecology at 1-800-Recycle.

Trademarks

The following are trademarks or registered trademarks of Toshiba, Inc. in the United States or other countries, or both:

48

Hardware Guide for Model 1NR

Toshiba

The Toshiba logo

The following are trademarks of Toshiba Global Commerce Solutions in the United States or other countries, or both:

AnyPlace

SureMark

SurePoint

SurePOS

TCxWave

TCxFlight

TCx

The following are trademarks of International Business Machines Corporation in the United

States or other countries, or both:

DB2

DB2 Universal Database

IBM and the IBM logo

PS/2

Wake on LAN

WebSphere

Linux is a trademark of Linus Torvalds in the United States, other countries, or both.

Magellan is a registered trademark of Datalogic Scanning, Inc.

SYMBOL a registered trademark of Symbol Technologies, Inc.

Microsoft, Windows, Windows NT, and the Windows 95 logo are trademarks of Microsoft

Corporation in the United States, other countries, or both.

Celeron and Intel are trademarks of Intel corporation in the United States, or other countries.

Oracle, JVM and Java are registered trademarks of Oracle and/or its affiliates.

Other company, product, or service names may be trademarks or service marks of others.

. Notices

49

50

Hardware Guide for Model 1NR

Index

45-degree mounting 30

B

battery return program 46

before you begin 27

C

cable ferrite requirement 45

calling for service

22

Class A compliance statement

Australia and New Zealand

42

China

42

European Union 41

FCC (USA)

40

Germany

41

Industry Canada

40

Japan 43

Russia

43

cleaning recommendations 36

communication interfaces

Ethernet interface card

16

RS-232 interface card

15

RS-485 interface card

16

USB interface card 15

controls and indicators

20

D

damage from electrostatic discharge

45

dimensions, physical

25

disposal of equipment 45

E

edition notice electromagnetic Interference statement

Russia

43

electronic emissions notices

Australia and New Zealand

42

China

42

European Union 41

FCC (USA)

40

Germany

41

Industry Canada

40

Japan 43

Korea

44

electrostatic discharge (ESD)

45

end of life disposal

45

equipment disposal

45

Ethernet

interface card 16

European Union battery recycling statement

47

F

ferrite requirement 45

fillers, installing 30

flat panel displays 48

H

hardware adjustment procedures

35

hardware requirements

19

height, all models

25

humidity requirements 26

I

installation, thermal/impact unpacking

27

installing fillers

30

interface card 27

large paper rolls

36

interface card installing

27

interfaces, communication 14

introduction

13

J

Japan Electronics and Information

Technology Industries Association statement

43

Japanese Electrical Appliance and Material

Safety Law statement

43

Japanese power line harmonics compliance statement

43

Japanese VCCI Council Class A statement

43

K

Korean communications statement

44

L

loading and replacing the paper roll 35

locating the power button 21

M

mercury-added statement

48

model and feature description 14

model number location

22

models and features

13

mounting mounting (continued)

45 degree

30

wall

30

N

Network (Ethernet and WiFi) interface adapter prerequisites

18

notices battery recycling

47

cable ferrites

45

electronic emissions 40

electrostatic discharge (ESD)

45

end of life disposal

45

Toshiba 39

O

opening the paper door 35

operating system requirements 18

P

paper

large rolls 36

supported types

35

thermal specifications

35 paper roll placement 35

paper roll, loading and replacing

35

perchlorate 48

physical dimensions

25

power button

location 21

printer statistics 37

printer, thermal/impact indicators and controls

20 operation 20

printhead cleaning, thermal head

36

product specifications

25

publications, 11

R

retrieving printer statistics 37

RS-232

interface card 15

RS-485

interface card 16

S

safety information

9

serial number location

22

statistics, printer 37

supported paper types

35

© Copyright Toshiba Global Commerce Solutions, Inc. 2016

51

T

Taiwanese battery recycling statement

47

Telecommunications regulatory statement

40

temperature requirements 26

thermal paper specifications

35

Toshiba Global Commerce Solutions support site

website 11

trademarks

48

U

understanding the controls and indicators

20

understanding your configuration 27 unpacking the printer 27

USB

interface card 15

W

wall mounting 30

weight, all models 25

WiFi 17

WiFi interface card

interface card 17

52

Hardware Guide for Model 1NR

TC62-0002-00

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement

Table of contents