YAESU FT-50R CheatSheet

YAESU FT-50R CheatSheet
Yaesu FT-50R 144/440 Dualband Transceiver
Storing a frequency in memory
1. Select VFO Mode
Press [V/M], less than 1 second. The Channel number
should be out.
2. Enter Frequency
Directly enter the frequency, 6 digits
3. Select Offset
FT-60R will automatically assign the offset based on the
band plan
4. Activate Tone (pg 22)
1. Press [F/W] then [1(SQ TYP)].
2. Use Tuning control to select “Tone”, PTT to save.
3. Press [F/W] then [2(CODE)].
4. Use Tuning control to select Tone Freq, [F/W] to
save.
6. Store in Mem Channel
1. Press [F/W] for 1 second. Mem Channel Number
blinks showing the next unassigned channel number.
2. Use Tuning control to select Mem channel.
3. Press [F/W] to save (listen for 1 beep), then [PTT].
7. Delete a Mem Channel
4. Press [F/W] to enter MR mode.
5. Use Tuning control to select Mem channel to delete.
6. Briefly press [HM/RV]; do not hold.
7. Display reverts to Channel 1.
7. Select Memory Mode
Press [V/M]. “MEMORY” is briefly displayed, then
frequency display with channel number.
--------------------------------------------------------------------------------------------------------Other Operations
Set Power Level
1. Press[F/W], then [3 (TX PO)]
2. Use Tuning control to select LOW, MED, HIGH
(pg 15)
3. Press [PTT] to save.
Battery Saver
1. Press [F/W], then [0 (o)SET].
2. Use Tuning control to select 41: RXSAVE.
3. Press [F/W] to select sleep time or OFF
4. Use Tuning control to select 43: TXSAVE.
5. Press [F/W] to select ON or OFF
6. To exit, press [PTT] to save.
Lock Keyboard
7. Press [F/W], then [6 LOCK] to toggle
Scanning
8. Press ▲MHz or ▼MHz
Set Menu Mode
1. Press [F/W], then use Tuning control to select 1 .. 55
2. Press [F/W] again for submenus.
3. Use Tuning control to select 43: TXSAVE.
4. To exit, press [PTT] to save.
1.AutoPowerOff
2.Beep Option
3.ARTS
4.ARS
5.BCLO
6.Beep
7.Bell
8.Busy LED
9.CPUClockFreq
10.CWID
11.StoreCWID
12.DCVolts
13.DCS Code
14.DCS N/R
15.DTMF delay
16.DTMF speed
17.DTMF Writer
18.EAI
19.EdgeBandBeep
20.EMG S
21.Internet Link
22.WIRES DTMF
23.Wires MemReg
24.LampKeybd
25.Lock Combinatn
26.MONI Sw.F
27.DisplayName
28.StoreChName
29.CTSS Paging
30.PageAutoAns
31.PageCode
32.PageCodeCTCSS
33.EnablePassWd
34.Store PassWd
35.ScanResumeMode
36.REV/HM
37.RF Squelch Adj
38.RepeaterShiftDir
39.Priority Revert
40.ReceivingMode
41.RxBatterySaver
42.SmartSearchMode
43.MemScanMode
44.EnableScanLamp
45.RepeaterShiftOffset
46.MemScanSkipMode
47.CTSCC/DCS Split
48.SelectToneEncoder
49.SynthesizerSteps
50.CTCSS ToneFreq
51.TOT Time
52.Enable TX LED
53.TxBatterySaver
54.VFO Band Edge
55.Wide/NarrowDev
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement