Xerox FreeFlow Accxes Print Server

Xerox FreeFlow Accxes Print Server
FreeFlow® Accxes® Print Server Software Version 15.0 b 136
September 2010
®
®
Xerox FreeFlow Accxes
Print Server
Customer Release Notes
®
XEROX® and XEROX and Design®, Accxes®, FreeFlow®, 6204®, 6279®, 6604/6605 Solution™, 6622 Solution™, and 7142 Solution™ are
trademarks of Xerox Corporation in the United States and/or other countries. Postscript® and Postscript®3™ are either registered
trademarks or trademarks of Adobe Systems Incorporated in the United States and/or other countries. UNIX® is a registered trademark
of The Open Group. Windows® is a registered trademark of Microsoft Corporation in the United States and/or other countries. Mac®
and Mac OS® are registered trademarks of Apple Inc
Table of Contents
1
Customer Release Notes ........................................................................... 1
Introduction............................................................................................................................................. 1
Feature Keys ............................................................................................................................................ 1
Release Deliverables............................................................................................................................. 2
Xerox 6204 Wide Format Solution .................................................................................... 2
Xerox 6279 Wide Format Solution .................................................................................... 2
Xerox 6604/6605 Wide Format Solution........................................................................ 2
Xerox 6622 Wide Format Solution .................................................................................... 2
Xerox 7142 Wide Format Solution .................................................................................... 3
Recommended Configurations ....................................................................................................... 3
Release Installation .............................................................................................................................. 3
Print From USB ........................................................................................................................... 4
Accxes Client Tools ................................................................................................................... 4
Web Printer Management Tool .......................................................................................... 4
UNIX® ........................................................................................................................................... 4
New Features in v15.0 ......................................................................................................................... 5
Support for the 7142 Printer ................................................................................................ 5
Permanent Job Queue ............................................................................................................ 5
Job Hold Support ....................................................................................................................... 5
Administrator Managed Queue .......................................................................................... 5
Naming of Scanned files ....................................................................................................... 5
Scan to USB Device .................................................................................................................. 6
Print from USB Device............................................................................................................. 6
GFI finisher key required for all finishing systems ...................................................... 6
Support for Wide Format Scan System on 6622......................................................... 6
Release Notes.......................................................................................................................................... 7
IE 6.0............................................................................................................................................... 7
Controller ...................................................................................................................................... 7
Manual Feed ............................................................................................................................... 7
Web Printer Management Tool .......................................................................................... 8
Disk Image Overwrite .............................................................................................................. 9
Touch Screen for 6622/6604/6605/6279 Specific Notes .................................... 10
7142 Specific Notes .............................................................................................................. 12
6604/6605 Specific Notes ................................................................................................. 12
GFI Finishing Specific Notes.............................................................................................. 13
Xerox FreeFlow Accxes Print Server Customer Release Notes
iii
Windows® 2008 security settings and TotalAccxes .............................................. 13
Customer Issues Resolved .............................................................................................................. 14
iv
Xerox FreeFlow Accxes Print Server Customer Release Notes
1 Customer Release
Notes
1
Introduction
®
®
®
The Xerox FreeFlow Accxes Controller Firmware Release 15.0 b 136 provides multinational
software for the Xerox 7142® Wide Format Printer, the Xerox Wide Format 6622 Solution™,
the Xerox Wide Format 6604/6605 Solution™, the Xerox 6279® Wide Format Printer, and the
Xerox 6204® Wide Format Printer. The languages supported are English, Deutsch, Espanol,
Francais, Italiano, and Brazilian Portuguese.
This document presents the following information about the FreeFlow Accxes Controller
Release 15.0 b 136. The document applies to LVX, UXC, and UXC-N controllers and for
simplicity they will simply be referred to as UXC.
•
Release deliverables
•
Recommended configurations
•
Installation procedures
•
Present supplemental information and known issues that are not mentioned in the
published customer user documentation.
Feature Keys
Print and Copy Feature Keys are enabled on the UXC controller by loading the “OS
Enablement” feature key.
Additionally, the following functions will be unavailable until the appropriate feature key
is loaded.
•
DGN printing is enabled with an “Other CAD” feature key.
•
JPEG 2000, PNG, BMP, and GIF printing is enabled with a “Raster” feature key.
•
DWF printing is enabled with the “AutoCAD” feature key.
•
Job Accounting Enables tracking media usage data for print, scan, and copy jobs. Account
Management Tool, or some other external accounting tool, is used to assign User Id,
Account Id, Printer Id associations, and then collects and tallies the stored data from the
printers).
•
PostScript® – Enables the interpretation of Adobe Postscript® 3™ and PDF 1.7 files.
•
Disk Image Overwrite – Enables the security options for overwriting image data on the
hard drive.
Xerox FreeFlow Accxes Print Server Customer Release Notes
1
•
Scan-To-Net – Enables Scan to Mailbox, Scan to FTP, and Scan to Remote Printer features.
•
Scan-to-Print – Allows a scanned document to be printed to the system automatically as a
proof copy.
•
Color Scanning key is only needed on the 6279 as this function is a standard function of
the 6604 and 6605 solutions.
•
9-D Speed key for printing on the 6279.
•
Speed Enhancement Turbo II – Enables 4 ips scan speed on the Wide Format Scan
Solution
•
Speed Enhancement Turbo III – Enables 7.33 ips scan speed on the Wide Format Scan
Solution.
•
GFI Enablement – Enables communication with a folder using the Generic Folder
Interface.
Release Deliverables
Xerox 6204 Wide Format Solution
The following executable is provided for the Xerox 6204 Wide Format Solution.
•
LVX, UXC, & UXC-N Controllers:
LVX_UXC_UXCN_6204_15_0b136.disk.bin (file size = 66,038,277 bytes)
Xerox 6279 Wide Format Solution
The following executable is provided for the Xerox 6279 Wide Format Solution and supports
the Wide Format Scan System.
•
LVX, UXC, & UXC-N Controllers:
LVX_UXC_UXCN_6279_15_0b136.disk.bin (file size = 65,746,322 bytes)
Xerox 6604/6605 Wide Format Solution
The following executable is provided for the Xerox 6604/6605 Wide Format Solution and
supports the Xerox Large Format Scan System.
•
LVX, UXC, & UXC-N Controllers:
LVX_UXC_UXCN_6604_6605_15_0b136.disk.bin (file size = 66,038,277 bytes)
Xerox 6622 Wide Format Solution
The following executable is provided for the Xerox 6622 Wide Format Solution and supports
the Xerox Large Format Scan System.
•
2
UXC & UXC-N Controllers:
UXC_UXCN_6622_15_0b136.disk.bin (file size = 66,203,838 bytes)
Xerox FreeFlow Accxes Print Server Customer Release Notes
Xerox 7142 Wide Format Solution
The following executable is provided for the Xerox 7142 Wide Format Solution.
•
UXC & UXC-N Controllers:
UXC_UXCN_7142_15_0b136.disk.bin (file size = 90,945,487 bytes)
Recommended Configurations
The following table specifies the RAM requirements for the various systems and configurations
supported by the FreeFlow Accxes controller.
UXC/UXC-N Controller
LVX Controller
System
Min
Recommend
Max
Min
Recommend
Max
Any System with the following feature
keys:
2GB
2GB
3GB
2GB
2GB
3GB
Any System using Total Accxes
2GB
2GB
3GB
2GB
2GB
3GB
7142, 6622, 6604/6605, 6279
2GB
2GB
3GB
2GB
2GB
3GB
AutoCAD
Other CAD
RASTER
Release Installation
This version of Accxes (15.0 build 136) requires OS Install CD version 4.4 or higher. BSP Kernel
revision 2.6.22.9-61.fc6 or later is also required. Service is required to upgrade from earlier
Accxes revisions.
This version of Accxes has been tested with:
•
6604/6605 printers running version 1.1.07 firmware and the Large Format Scanner
running 1.64 firmware.
•
6204 printers running version 1.1.07 firmware.
•
6279 printers running version 1.00.20 firmware.
•
6622 printers running version 22010400 firmware.
Xerox FreeFlow Accxes Print Server Customer Release Notes
3
•
7142 printers running version Pro 01.05 or 01.06 firmware.
Print From USB
Place the firmware file onto a USB drive and insert into one of the USB ports on the controller
or UI. Choose the “Print From Device” service and select the file on the USB drive to request
that it be submitted/printed. A status sheet will be printed to indicate that the download was
successful.
Accxes Client Tools
Download the file named “<Controller>_<Printer>_<Accxes_version>.disk.bin”. A status sheet
will be printed and indicate that the download was successful.
Web Printer Management Tool
Select Utilities > Upload > Upload File. Use the Browse button to select the
“<Controller>_<Printer>_<Accxes_version>.disk.bin”. Click on the “Upload” button. A printed
status sheet will indicate that the download was successful.
UNIX®
Download the software using LPR with the following command line:
lpr –P printername “<Controller>_<Printer>_<Accxes_version>.disk.bin”
A status sheet will be printed and indicate that the download was successful.
4
Xerox FreeFlow Accxes Print Server Customer Release Notes
New Features in v15.0
Support for the 7142 Printer
The 7142 is now supported by the Accxes print server as a printer via the
customer’s network. This allows for prints to be submitted through the Accxes
print server via ACT, drivers, lpr, Web Printer Management Tool upload file, and
Instant Accxes folders directly to the 7142 printer.
Configuration of the Accxes controller is managed through the Web Printer
Management Tool as there is no other User interface.
Color printing is supported for the following data formats: TIFF, HP-GL/2, HPRTL, JPEG, Postscript/PDF, CGM, and VCGL. Three print quality modes are
supported “Fast”, “Normal”, and “Best”
Note: To function properly, Accxes requires the 7142 to have version 01.05
or 01.06 Pro firmware.
Permanent Job Queue
The Accxes print server job queue is now preserved across power cycles and
reboots. This prevents data loss during power outages and other inadvertent
shutdowns. Any active job at the time of system shutdown will be placed in
the “Hold” queue at power-up. This allows the system administrator to control
which jobs get processed first when the system resumes.
Job Hold Support
A job can now be submitted to a hold queue or placed on hold for printing at a
later time. Jobs can be put on hold or released from either the touch screen UI
or the Web Printer Management interface.
Administrator Managed Queue
The Accxes print server now supports a mode which puts all incoming jobs on
hold to allow the key operator to manage what gets printed when. This mode
is controlled via the Web Printer Management Tool or the Touch Screen UI.
Naming of Scanned files
Users can now name their images prior to scanning their documents. A simple
numeric index will allow quick continuous scanning of originals. Or users can
enter unique ID’s for each scan. This support is for all scanning operations
including “Scan to Mailbox”, “Scan to FTP”, and “Scan to USB”
Xerox FreeFlow Accxes Print Server Customer Release Notes
5
Scan to USB Device
A new feature has been added to the touch screen user interface (6279,
6604/6605, and 6622) to support scanning from on-board scanners to a USB
device. This feature can be accessed by inserting a USB device or selecting an
inserted device from the “Scan to Mailbox” device list. A USB device (FLASH
drive or portable HDD) can be connected via the touch screen UI or directly
into one of the USB ports on the controller to support scanning. This allows a
user to have his files in hand when the scanning operation is complete. USB
ports on the controller are high speed ports and have higher performance than
those on the touch screen UI. This feature is compatible with the touch screen
on the 6204 User Interface.
Print from USB Device
Another new service of the touch screen (6279, 6604/6605, and 6622) is the
support of printing from a connected USB device or CD. The user can browse
and select a file from the attached device and request that it be printed to the
local printer. The settings used are the default print settings as configured on
the Web Printer Management interface. This feature is compatible with the
touch screen on the 6204 User Interface.
GFI finisher key required for all finishing systems
We have added the requirement that all finishers be enabled with a new
feature key. If the feature key is not present the finisher communication will
not be activated.
Support for Wide Format Scan System on 6622
Legacy users will be happy to know that support for the Wide Format Scan
System has been added to the 6622 printer. Users upgrading to a 6622 can
now keep their familiar scanner for continued use. (Note: additional
hardware is required.)
6
Xerox FreeFlow Accxes Print Server Customer Release Notes
Release Notes
The following information supplements the 15.0 customer user guides.
IE 6.0
IE 6.0 only does not display the Total Accxes preview image when using Web Printer
Management Tool.
Controller
Stamp Does Not Appear
If the user tries to upload a stamp files that contains an invalid format, or if the Accounting
Mode is set to “Enabled”, no error message will be displayed. The Web Printer Management
Tool screen will display a message that the file was uploaded successfully and the stamp’s
filename will not appear in the “Printer Resident Stamps” list. To avoid this situation, set the
Job Accounting mode to “Optional” before uploading stamps. The Web Printer Management
Tool has no knowledge of the validity of any file that is sent to the printer. File validation and
error handling is done on the printer by the FreeFlow Accxes controller. The Web Printer
Management Tool only reports that the file was sent to the printer successfully.
Scaling Interaction with “ANY”
The media size “ANY” will select the best sheet size for an image to prevent clipping. If a user
specifies a media size of “ANY” and a scale factor that makes the image too large for any
sheet size and mismatch mode is set to scale, the controller will select the largest sheet size
and scale the image to fit on it. If this is not the desired behavior, a specific sheet size can be
selected, or the media mismatch mode can be set to QUERY.
Margins May Cause Clipping
If the margins (TOP, BOTTOM, RIGHT and LEFT) are set to a non-zero value (5mm is the
default) then that amount of whitespace will be added to the image before placing it on the
media and could cause part of the image to be shifted off the page, or clipped. To correct this
problem set the margins to 0.
CGM Files and Folding
Certain CGM files contain rotation commands which can confuse the system when folding. If
the title block is not visible or the plot is bypassed and not folded, change the title block
location to obtain a correctly folded document.
Manual Feed
Manual feed media source will be ignored when used with the Accxes
Client Tools’ page composition feature
Go to Accxes Client Tools > Job Option tab > Composition tab > Select Overlay Images > Media
Source drop down menu. Although “Manual Feed” is listed as a choice of media source for
page composition jobs, the print job will be treated as if AUTO media source was selected. If
an appropriate roll of media is available, it will be printed on that media; otherwise, the job will
Xerox FreeFlow Accxes Print Server Customer Release Notes
7
query until the correct roll media is installed. In addition, other Media Source selections will be
treated as AUTO if an appropriate roll of media is available in a different roll.
InstantAccxes
When using InstantAccxes folders on an IPv6 network DNS server is recommended and you
must reference the system directly as shown below:
•
Vista: Start>Run> \\<Controller Name>
•
Linux: smb://<Controller Name>
InstantAccxes Folders not accessible from Mac® on IPv6
InstantAccxes folders are not accessible to systems running Mac OS® 10.4 or earlier versions
on IPv6 networks.
Web Printer Management Tool
TotalAccxes copies Setting does not function
When defining a remote printer for use with TotalAccxes there is a selection for “Copies” which
is NOT applied to the job and should be ignored.
Printer Queue – Main Web Printer Management Tool Screen
The FreeFlow Accxes Controller supports a maximum of 120 active printer jobs in the queue
and 8 active copy jobs. If subsequent jobs are sent before the 128th prints, ports will refuse
connections and there can be scan errors; when there are fewer jobs in the queue, the jobs can
then be resubmitted or scanned. Additionally, completed jobs will be removed from the queue
display immediately to make room for the newly submitted print jobs. To avoid these issues,
keep the number of active print jobs to under the 128 limit.
Note
More than 128 files can be sent from the Document Submit Tool as one print job,
but all of the files in the print job must have printed before sending subsequent jobs,
or the jobs will be refused.
German users only
Zum Drucken von Etiketten mit Umlauten DRUCKERVORGABEN > DRUCKER-EINSTELLUNG >
Plot-Etiketten wählen. Anschließend im Dropdown-Menü für Fonts einen der folgenden Fonts
wählen: HP2 Stick Font Latin - 1 oder HP2 Stick font Latin - 1 – Proportional.
Large Scaling Factors
Images set to scale beyond the largest installed roll will not scale beyond the largest width
unless a specific roll is selected, a specific page size is selected, or mismatch mode is set to
something other than scaling. This is a behavior that has changed from previous releases (prior
to 9.0).
For example: The largest roll installed is 36". Scaling is set to 999%. Submit an ARCH E sized
drawing (Media Size = Any, Mismatch = Scaling). The drawing will not be scaled.
In order for the output to exhibit the desired scaling factor, one of the following conditions
must be met:
8
Xerox FreeFlow Accxes Print Server Customer Release Notes
What to do:
Set Mismatch Mode to Substitute
•
Request a Media Size of ARCH E via Web Printer Management Tool, ACT, or the Driver
•
Request a Media Size 36" Roll via Web Printer Management Tool, ACT, or the Driver
HPGL Page – End of File
If the files are streamed via any port on the system, these are treated as a single job and no
reset is done between them. However, if one uses the LPD protocol to send the files one at a
time, the effect is that the printer is reset after each job. If the “Reinitialize after EOF” is set to
be on, the FreeFlow Accxes firmware will reset the printing parameters after each plot file that
is received by a serial port or a parallel port. To reset the HPGL parameters on the Web Printer
Management Tool, select Printer Defaults > Emulations > HPGL. Click on the box in front of
“Reinitialize after EOF”. Click on the “UPDATE PRINTER” button.
Default PostScript Page Size
If a PostScript job does not specify a page size (either by using a compatibility operator such
as “letter”, or “a4”, or by using the setpagedevice operator /PageSize parameter), the page size
used is the one specified by the Default PostScript Page Size parameter available via the
printer user interface, or via the Web Printer Management Tool.
“Printer has been updated” Message
If the user presses the “UPDATE PRINTER” button without actually making changes first, the
Web Printer Management Tool will still return a message that the printer was updated. The
Web Printer Management Tool cannot distinguish a page that has been modified from one
that has not been modified. This is because of the “stateless” nature of the http protocol and
the fact that no events are generated (html) when text values are entered or items are
selected. When the “UPDATE PRINTER” button is pressed, all the data on the form is gathered
and sent to the server. If the data is valid, the printer is updated and “The printer was updated
successfully.” message is returned. If inappropriate data is sent, an error message is returned.
To verify valid changes to printer settings, a test print can be printed to view the changed
settings.
Scan to Print and Margins
When performing a scan-to-print operation the scanned image is printed using the current
printer processing defaults including margins. If the image scanned is exactly the width of the
paper, then the processing default margins should be set to zero to prevent the image from
being clipped or placed on a larger sheet of paper.
Scaling Shaded Documents
Scaling documents with error diffused shaded areas should be done in a photo mode to
produce the best image quality. Line mode tends to exaggerate the shading dots making
them more visible.
Disk Image Overwrite
Overview
The Disk Image Overwrite feature has two operations: Immediate and On Demand. The
immediate operation overwrites image data on the hard drive immediately after it is no longer
Xerox FreeFlow Accxes Print Server Customer Release Notes
9
needed (i.e. When the page has printed). The On Demand operation cleans the entire disk.
Both On Demand Image Overwrite and Immediate Image overwrite feature are configured by
the system administrator, assuming that the system administrator password is set to a nonzero value.
Algorithm
The overwrite algorithm for both IIO and ODIO conforms to the U.S. Department of Defense
Directive 5200.28-M (Section 7, Part 2, paragraph 7-202), and is common to all
WorkCentre/WorkCentre Pros and Accxes controllers.
The algorithm for the Image Overwrite feature is:
1.
2.
3.
4.
Pattern #1 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0x35 (ASCII “5”)).
Pattern #2 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0xCA (ASCII compliment of 5)).
Pattern #3 is written to the sectors containing temporary files (IIO) or to the entire
spooling area of the disk (ODIO). (hex value 0x97 (ASCII “ú”)).
10% of the overwritten area is sampled to ensure Pattern #3 was properly written. The
10% sampling is accomplished by sampling a random 10% of the overwritten area.
Note
See Online Help in Web Printer Management Tool for more details about using the Image
Overwrite feature.
Touch Screen for 6622/6604/6605/6279 Specific Notes
Overview
This section is clarification to the existing documentation available for the Touch Screen UI
which is used on the 6622, 6604/6605, and 6279 systems.
Scan to Print Taking Too Long
When scanning documents to a Mailbox, or FTP site and printing them at the same time the
prints may be slow due to scan processing. Processing of the scan image takes priority over
the printing and so the print may be delayed.
Timer Reset Button
This button will reset the timer value to the previous setting, NOT to the factory default
setting.
Shared Settings
Many of the settings for Scan-to-Mailbox Scan-to-Remote-Printer and Scan-to-FTP are shared
and so many of the settings made on one will stay when selecting the other.
Can’t interrupt multi-page/set operations
When creating a collated copy set or a multi-page scan file you cannot leave the Service to
enter another service like machine info to change administration settings. To allow the user to
10
Xerox FreeFlow Accxes Print Server Customer Release Notes
do so would force an abort of the current scanned job or potentially change a setting which
should have applied to all pages and so produce an inconsistent set.
Managing Multi-page document sizes
When creating a multi-page document it is important to use an appropriate resolution for the
application. A 600 dpi scan in full color is 38MB per inch (for 36” wide doc) and even with JPG
compression will create files which quickly approach or exceed 1GB. Unless the application
warrants a high resolution scan, it is recommended that 200-300 dpi be used or limit the
number of pages to keep file sizes manageable.
Speeding up Remote Print Times
When scanning a document to a remote printer it is important to use an appropriate
resolution for the application. A 600 dpi scan in full color will take significantly longer to
process than a 200 or 300 dpi scan. Unless the application warrants a high resolution scan, it
is recommended that 200-300 dpi be used to increase productivity.
Installing and removing feature keys
The 6279 and 6604/6605 systems must be in an idle state, not in a power-saving state when
installing or removing feature keys. In a power-saving state some components are powered
down and cannot respond to feature key changes.
Any Sheet page sizes
When submitting a job where the media size is set to “ANY_SHEET” all standard page sizes will
be used to identify a good fitting sheet. Standard page sizes include all ANSI, ARCH, ISO A,
ISO B, 30x42, 17x25, 22x36 and extended ISO sizes like 297x1189, 297x841, 420x841,
594x1189, 841x2378.
Changing settings on Instant Accxes folders
When settings are changed on Instant Accxes folders, the folder usually needs to be re-shared
to the network. This may cause InstantAccxes folders which are open on client workstations to
become invalid until the user closes the folder and re-opens it.
Printing Custom Size Documents
When printing non-standard size documents on the 6279 or 6604/6605 Setting media
mapping to “Any_roll” and setting mismatch mode to “Scale” produces the best results and
prevents clipping.
Web Printer Management Tool Reports Out of Toner Until Next Job
On the 6279 and 6604/6605 if an out of toner condition occurs the Web Page will report the
IOT status as out of toner until the next job is processed even if toner is loaded into the
system. The printer User Interface will report it correctly.
TotalAccxes prints extra media to an Accxes driven printer
When submitting large prints (ARCH E) via TotalAccxes to an Accxes driven printer it may
produce an oversize print.
“Please Wait” Message
Occasionally when inserting one document immediately after another the printer user
interface will display a “please wait” message until it is ready for the document. If this
Xerox FreeFlow Accxes Print Server Customer Release Notes
11
message remains displayed for more than a few seconds, remove the newest document and
re-insert to begin your scan.
Copying ARCH-E size prints
To maximize copying of ARCH-E size prints always copy them using the preset output format
ARCH-E. When copied in synchro mode it is likely that ARCH-E documents will scan as 1220mm
and will incur unneeded pauses between printing pages. The 6204 IOT will pause between
pages which are greater than ARCH-E (48 inches 1219 mm) in length for the fuser to come all
the way back to full temp even if it is in the nominal fuser temperature range.
Sluggish Response While Scanning
Occasionally under heavy load, the system, especially the User Interface, has been seen to
respond slowly. Response times usually speed up once the active jobs are completed. If they
do not a reboot of the system will restore proper operation.
7142 Specific Notes
Media Mapping
The 7142 supports a wide array of different media types. To get the best print quality you
must specify the media type on the IOT UI when the media is loaded into the printer. Below
is a mapping:
Web Name
Printer UI Name
Bond
Bond
Coated
Coated
Film
Film
Photo
Photo
Semi Opaque
Mono Tracing
Tracing
Color Tracing
6604/6605 Specific Notes
Scanner Fails to Accept Document
If the scanner fails to accept and scan a document and does NOT display an error message it
is necessary to open and close the scanner to reinitialize it for continued operation. The
scanner may take up to 10 seconds to initialize after closing.
Copy Template Viewing
When attempting to view a copy template with “Blue Line” as the original type the system will
shutdown. Any other original type will be displayed correctly.
Enhanced Stitch Support
Version 15.0 b 136 adds support for stitch skew detection and will report an error if the stitch
target is NOT inserted correctly.
12
Xerox FreeFlow Accxes Print Server Customer Release Notes
GFI Finishing Specific Notes
Gera Mondial B6
Due to end of roll conditions or roll switch conditions, the system may appear to be hung or
unresponsive. The system can be reengaged simply by pressing the green folder reset button
on the folder. By pressing the reset button, the system will begin again with the pages
currently queued. Enhancements have been made to the system to allow for the reset as
expected.
Windows® 2008 security settings and TotalAccxes
When using TotalAccxes on Windows 2008 servers, you must make some security setting
changes to allow for the configuration of remote destinations. One of the following will work.
1.
Enable scripting.
a. Go to Tools->Internet Options->Security
b. Click on 'Custom level...' for the 'Internet' security zone.
c. Scroll down until you reach the category 'Scripting' and set 'Active Scripting' to enabled.
2.
Add the site to the trusted sites zone
a. Navigate to the page you wish to allow to work
b. Go to File->Add this site to->Trusted Sites Zone
3.
Disable the Internet Explorer Enhanced Security Configuration
a. Open the Server Manager
b. Click on 'Configure IE ESC'
c. Turn off IE ESC for either Administrators or Users as seen fit.
Xerox FreeFlow Accxes Print Server Customer Release Notes
13
Customer Issues Resolved
The following issues were resolved in 15.0 build 136.
Issue Description
Problem
Resolution
SPAR #882283326 – PDF
scaling down of fine lines.
Scaling down fine lines with
minimum line width set to more
than 1 pixel produced unusually fat
lines.
The fine line calculation was corrected to
produce the correct thickness of lines.
SPAR #051708141 – DWF
files show completed, but
nothing prints
Certain DWF files were not properly
interpreted.
The DWF interpreter was upgraded to properly
support these DWF files.
Streamed DWF and PS/PDF
files did not print correctly.
When PS/PDF or DWF files were
streamed to the server without file
separators only the first page was
printed.
The server was updated to better identify the
start of PS/PDF and DWF files in streams.
14
Xerox FreeFlow Accxes Print Server Customer Release Notes
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising