www.norbar.com TruTorque™ Screwdriver

www.norbar.com TruTorque™ Screwdriver
www.norbar.com
TruTorque™ Screwdriver
Models 1.5 N.m to 6 N.m (13 lbf.in to 53 lbf.in)
Norbar’s new range of Torque Screwdrivers embodies the values of the TruTorque brand:
accuracy, ease of use and comfort in use.With an accuracy that exceeds the requirement of
ISO6789 (+/-6% for tools up to 10 N.m). Furthermore, they are engineered to retain this accuracy
over many thousands of tightened cycles.
• Supplied with a 1/4” hexagon bit holder designed using a 4mm hexagon stem.
• For maximum versatility and particularly for applications with limited access, the bit holder can be
removed and replaced with widely available screwdriver blades.
• Easy torque adjustment without the need of additional specialist tools.
• All tools feature a lock to prevent accidental adjustment of the set torque.
• Accuracy exceeds the requirements of ISO6789.
• Traceable calibration certificate for the clockwise direction supplied with all
adjustable tools. (not ‘P’Types).
• Tool ‘slips’ when torque is achieved removing the possibility of ‘overtightening’.
• Comfortable, durable handle.The handle is constructed
using two materials; a base material for strength
overlaid with a soft feel grip for comfort and slip
resistance.
Adjustables - N.m
Model
TTs1.5 N.m
TTs3.0 N.m
TTs6.0 N.m
Part No.
13475
13476
13509
Range
Length
Weight
N.m
mm
Kg
0.3 - 1.5
0.6 - 3
1.2 - 6
155
155
155
0.235
0.235
0.235
Range
Length
Weight
lbf.in
mm
Kg
2.5 - 13
5 - 26
10 - 53
155
155
155
0.235
0.235
0.235
Adjustables - lbf.in
Model
TTs13 in.lb
TTs26 in.lb
TTs53 in.lb
Part No.
13515
13516
13517
Production ‘P’ Type
Model
TTs1.5
TTs3.0
TTs6.0
12
Range
Part No.
13510
13511
13512
Norbar - Total Torque Control
Length
Weight
N.m
lbf.in
mm
Kg
0.3 - 1.5
0.6 - 3
1.2 - 6
2.5 - 13
5 - 26
10 - 53
155
155
155
0.235
0.235
0.235
Bit holder can be removed and replaced with widely available
screwdriver blades.
Torque Wrenches
TruTorque™ Wrench
Models 20 N.m and 50 N.m (180 lbf.in and 35 lbf.ft)
Durability has been a primary development goal – both in terms of the lifetime of components and
longevity of calibration accuracy. Cycle testing of wrenches at full torque was a key element of the
development process and, in total, several million tightening cycles were accumulated. The result is a
product that you can use with complete confidence that you have the best tool for the job.
• Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench
is supplied with a traceable calibration certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer
increment applies to the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with
minimal effort in approximately ten complete turns (exact number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.
• Versatile Ratchets: the tough ratchets are reversible and have a narrow engagement angle of 5º to
allow easy positioning of the tool in the tight confines of today’s vehicles and machines.
• Comfortable, Durable Handle: the handle is constructed using two materials: a base material for
strength overlaid with a soft feel grip for comfort and slip resistance. The handle material and
lens resist chemicals in common usage in the automotive, aviation and industrial environments.
Norbar Non-Magnetic torque wrenches are
designed primarily for the medical MRI scanner
market. However, they will prove invaluable where
ever a torque wrench has to be used in the
presence of a strong magnetic field.There are
currently two models: 1 - 20 N.m, Part Number
13292 and 8 - 50 N.m, Part No. 13293.
Ratchet Adjustables - Dual Scale
Model
Square
Drive
in
Part No.
TT20
TT20
TT50
TT50
⁄4
⁄8
3
⁄8
1
⁄2
13262
13263
13264
13265
1
3
Range
Resolution
N.m
lbf.ft
N.m
1 – 20
1 – 20
8 – 50
8 – 50
10 – 180*
10 – 180*
6 – 35
6 – 35
0.05
0.05
0.1
0.1
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
30
30
30
30
72
72
72
72
230
230
278
278
0.4
0.4
0.5
0.5
* lbf.in
N.m only and lbf.ft only versions are available, contact Norbar for details.
13
www.norbar.com
TruTorque™ Wrench
Models 100 N.m to 300 N.m (75 lbf.ft to 250 lbf.ft)
In engineering this range, Norbar has paid close attention to accuracy, ease of setting and comfort
in use.
Durability has been a primary development goal – both in terms of the lifetime of components and
longevity of calibration accuracy. Cycle testing of wrenches at full torque was a key element of the
development process and, in total, several million tightening cycles were accumulated. The result is a
product that you can use with complete confidence that you have the best tool for the job.
• Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench
is supplied with a traceable calibration certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer
increment applies to the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with
minimal effort in approximately ten complete turns (exact number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.
• Versatile Ratchets: the tough ratchets are reversible and a narrow engagement angle of 6º to
allow easy positioning of the tool in the tight confines of today’s vehicles and machines.
• Bi-directional Torque: the ratchets are also ‘push through’ meaning that these
wrenches will provide torque control in both the clockwise and anticlockwise directions.
• Comfortable, Durable Handle: the handle is constructed using two
materials: a base material for strength overlaid with a soft feel grip
for comfort and slip resistance. The handle material and lens
resist chemicals in common usage in the automotive,
aviation and industrial environments.
TruTorque is available with either dual scale (N.m and lbf.ft)
or single scale (N.m or lbf.ft)
Ratchet Adjustables - Dual Scale
Model
TT100
TT100
TT150
TT200
TT250
TT300
Square
Drive
in
Part No.
⁄8
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
13266
13267
13268
13269
13270
13271
3
1
Resolution
Range
N.m
lbf.ft
N.m
20 – 100
20 – 100
30 – 150
40 – 200
50 – 250
60 – 300
15 – 75
15 – 75
20 – 110
30 – 150
40 – 185
45 – 220
0.5
0.5
0.5
1.0
1.0
1.0
N.m only and lbf.ft only versions are available, contact Norbar for details.
14
Norbar - Total Torque Control
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
38
38
38
46
46
46
60
60
60
60
60
60
405
405
455
505
560
610
1.0
1.0
1.1
1.2
1.4
1.6
Torque Wrenches
TruTorque™ TTi Wrench
Models 50 N.m to 300 N.m (35 lbf.ft to 220 lbf.ft)
TruTorque TTi wrenches feature the same accuracy, ease of setting and comfort in use as the
regular TruTorque models.They add to this formula non-reversible push through ratchets which are
ultra robust and very simple to use. Body tubes and ratchets are finished in an attractive and
durable satin chrome plate.
• Accuracy: +/-3% of reading exceeds all international standards for torque wrenches. Each wrench
is supplied with a traceable calibration certificate.
• Micrometer Scale for simple and error free setting. (On dual scale wrenches, the micrometer
increment applies to the N.m scale.)
• Quick and Light Adjustment: adjustment over the entire scale can quickly be achieved and with
minimal effort in approximately ten complete turns (exact number varies by model).
• Adjustment Lock: all models feature a lock to prevent accidental adjustment of the set torque.
• Versatile Ratchets: the tough ratchets have a narrow engagement angle of 5º on the TTi50 and 6º
on all other models allowing easy positioning of the tool in the tight confines of today’s vehicles
and machines.
• Bi-directional Torque: the ratchets are ‘push through’ meaning that these
wrenches will provide torque control in both the clockwise and anticlockwise directions.
• Comfortable, Durable Handle: the handle is constructed using two
materials: a base material for strength overlaid with a soft feel grip
for comfort and slip resistance. The handle material and lens
resist chemicals in common usage in the automotive,
aviation and industrial environments.
Adjustment is achieved by rotating the end knob.The centre
ring provides the lock feature.
Ratchet Adjustables - Dual Scale
Model
Square
Drive
in
Part No.
TTi50
TTi50
TTi100
TTi100
TTi150
TTi200
TTi250
TTi300
⁄8
⁄2
3
⁄8
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
⁄2
13438
13439
13440
13441
13442
13443
13444
13445
3
1
Resolution
Range
N.m
lbf.ft
N.m
8 – 50
8 – 50
20 – 100
20 – 100
30 – 150
40 – 200
50 – 250
60 – 300
6 – 35
6 – 35
15 – 75
15 – 75
20 – 110
30 – 150
40 – 185
45 – 220
0.1
0.1
0.5
0.5
0.5
1.0
1.0
1.0
N.m only and lbf.ft only versions are available, contact Norbar for details.
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
30
30
38
38
38
46
46
46
72
72
60
60
60
60
60
60
278
278
405
405
455
505
560
610
0.5
0.5
1.0
1.0
1.1
1.2
1.4
1.6
15
www.norbar.com
Professional Torque Wrench
Model 5
The Model 5 is a torque wrench that offers high accuracy and the convenience of
interchangeable 1/4 in. hexagon bits. (ISO 1173:1988 Form C drive bits).
• Accuracy of ±3% of reading exceeds all torque wrench standards.
• Traceable calibration certificate supplied, to satisfy ISO9000:2000 quality systems.
• Non Length dependent.The Model 5 remains
accurate regardless of hand position.
• Supplied in a storage case.The case allows
space for the storage of additional drive
bits and optional stepless ratchet.
Production ‘P’ Types
The ‘P’ type version prevents unauthorised alteration of torque setting. No external
calibration equipment is required to set the Model 5 ‘P’ Type.
Coloured end seals are provided to identify the wrench to a particular operator, torque
setting or calibration period.
Model 5 ‘P’ Type
Adjustable Torque Wrenches
Model
Units
Square
Drive
in
Part No.
5
5
5
N.m
lbf.in
kgf.cm
⁄4
⁄4
1
⁄4
13001
13002
13003
1-5 N.m
10-50 lbf.in
10-50 kgf.cm
Range
1
1
Range
Length Weight
mm
kg
170
170
170
0.12
0.12
0.12
‘P’ Type Torque Wrenches
Optional stepless ratchet (Part No. 13122)
16
Norbar - Total Torque Control
Model
Units
Square
Drive
in
Part No.
5 ’P’
5 ’P’
5 ’P’
N.m
lbf.in
kgf.cm
⁄4
⁄4
1
⁄4
13004
13005
13006
1
1
1-5 N.m
10-50 lbf.in
10-50 kgf.cm
Length Weight
mm
kg
154
154
154
0.12
0.12
0.12
Torque Wrenches
Professional Torque Wrench
The ‘Professional’ is Norbar’s core torque wrench range containing the most
popular models and the most model variants to suit almost every application.
More than 60 years of torque wrench manufacture has shaped this
range and no aspect of design, manufacture or materials is taken
to chance. Every new product and design change is rigorously
tested before introduction, a process that makes these
wrenches amongst the most durable and accurate
on the market.
Torque Mechanism
Adjustment Lock
A robust lock prevents
accidental adjustment
of the wrench during
use. Fingertip light
adjustment comes
from the best design
and materials.
Norbar’s accurate
mechanism has been
developed and
enhanced over a 40
year period and several
million examples have
been produced. Less
parts to maintain than
‘pivot block’
mechanisms. Simple
calibration adjustments
without disassembly.
Torque Scale
Ratchets
Unique ‘harmonic drive’ scale
mechanism allows a long scale
length and therefore accurate
and error free setting.
The Professional
torque wrench is
available with a choice
of ratchets and as a
‘Torque Handle’ for
interchangeable fittings.
Norbar 5 station tester is
used for durability and
benchmark testing.
17
www.norbar.com
Professional Torque Wrench
‘Automotive’ Ratchet Models
The Professional torque wrench offers an ideal combination of accuracy, robust construction,
comfort and ease of use.
The reversible ratchets on these models are designed with compact dimensions and a narrow
engagement angle resulting from the 72 tooth pattern. These features make the wrench ideal
for use in the confined spaces of modern motor vehicles and many other applications.
• Accuracy of ±3% of reading exceeds all international standards for torque wrenches.
• Every wrench is supplied with a calibration certificate to satisfy the requirements of ISO
9000:2000.
• Soft feel handle provides excellent grip even in oily conditions.
• Handle material and lens resist all chemicals in common automotive, industrial and aviation use.
• Locking mechanism prevents accidental adjustment of the wrench during operation.
• Long scale graduated in N.m and lbf.ft allows for foolproof and
accurate setting.
• Supplied in moulded box for
storage and protection.
Ratchet Adjustables - Automotive Ratchet
18
Model
Square
Drive
in
Part No.
60
60
100
100
200
⁄8
⁄2
3
⁄8
1
⁄2
1
⁄2
13010
13011
13012
13013
13014
3
1
Norbar - Total Torque Control
Range
N.m
lbf.ft
8 – 60
8 – 60
20 – 100
20 – 100
40 – 200
5 – 45
5 – 45
15 – 80
15 – 80
30 – 150
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
31
31
31
31
41
72
72
72
72
72
307
307
347
347
443
0.6
0.6
0.7
0.7
1.0
Torque Wrenches
Professional Torque Wrench
‘Industrial’ Ratchet Models
These wrenches offer the same outstanding features as those on the previous page but
with a wider model range – up to 400 N.m – and a different ratchet concept.
The push-through ratchets on these models are robustly engineered for strength
and durability. The strength and high wear resistance comes from the design of
the tooth pattern while a principle of offset ratchet pawls gives a narrow
engagement angle of 5º on wrenches up to and including Model 200
and 6º on Models 300 to 400.
The push through square drive is not only a robust design
but allows the wrench to be used for torque control
in both the clockwise and anti clockwise
directions. Please note that the 3/4” square
drive of the Model 400 has to be
removed and re-inserted on the
other side of the ratchet
head rather than pushed
through.
Ratchet Adjustables - Industrial Ratchet N.m/lbf.ft Models
Model
Square
Drive
Part No.
in
Range
N.m
lbf.ft
lbf.in Models
Ratchet
Diameter
Length
Weight
mm
mm
Kg
Model
Range
lbf.in
60
3
13042
8 – 60
5 – 45
35
312
0.66
13075
60
1
13043
8 – 60
5 – 45
40
320
0.74
13076
70 - 530
100
3
13044
20 – 100
15 – 80
35
353
0.73
13077
100 - 800
⁄8
⁄2
⁄8
70 - 530
100
1
13045
20 – 100
15 – 80
40
359
0.80
13078
100 - 800
200
1
13046
40 – 200
30 – 150
42
442
1.01
13079
400 - 1800
⁄2
⁄2
300
1
13047
60 – 300
45 – 220
49
570
1.38
13080
500 - 2500
330
1
13049
60 – 330
45 – 250
49
683
1.50
13082
500 - 3000
400
3
13050
80 – 400
60 – 300
49
683
2.09
13083
700 - 3500
⁄2
⁄2
⁄4
All other features as table to the
left.
19
www.norbar.com
Adjustable - 16mm Spigot
Model
Part No.
60 TH
100 TH
200 TH
300 TH
13018
13019
13020
13021
N.m
Range
8 – 60
20 – 100
40 – 200
60 – 300
lbf.ft
Length
mm
Weight
Kg
5 – 45
15 – 80
30 – 150
45 – 220
301
340
423
548
0.55
0.6
0.78
1.13
Female Ended Adjustable - 9 x 12mm and 14 x 18mm
Model
Professional Torque Wrench
Torque Handles
Norbar Torque Handles are based on the
‘Professional’ wrench range and share the same
high precision engineering.
Two end fitting styles are catered for: 16mm
diameter spigot type and the 9 x 12mm and
14 x 18mm rectangular type.
For many applications a spanner end fitting rather
than a socket is the best or, often, the only
solution.Typically this will be because the joint
is a pipe union (such as a brake pipe).
Available Fittings
See pages 28 & 29
20
Norbar - Total Torque Control
60 TH
100 TH
200 TH
300 TH
400 TH
Part No.
9x12 14x18
13022
13023
13024
-
13025
13026
13028
Range
N.m
lbf.ft
8 – 60
20 – 100
40 – 200
60 – 300
80 – 400
5 – 45
15 – 80
30 – 150
45 – 220
60 – 300
Length
mm
Weight
Kg
300
340
421/431
546.5
658
0.55
0.6
0.78
1.13
1.78
Length
mm
Weight
Kg
280
320
402
640
0.55
0.6
0.78
1.13
Production ‘P’ Type - 16mm Spigot
Model
Part No.
60 THP
100 THP
200 THP
300 THP
11167
11143
11144
11117
Range
N.m
lbf.ft
8 – 60
20 – 100
40 – 200
60 – 300
5 – 45
15 – 80
30 – 150
45 – 220
Female Ended Production ‘P’ Type - 9 x 12mm & 14 x 18mm
Model
Part No.
9x12 14x18
60 THP
100 THP
200 THP
300 THP
400 THP
11170
11150
11151
-
11152
11153
13068
N.m
Range
8 – 60
20 – 100
40 – 200
60 – 300
80 – 400
lbf.ft
Length
mm
Weight
Kg
5 – 45
15 – 80
30 – 150
45 – 220
60 – 300
280
319
400/410
528
640
0.55
0.6
0.78
1.13
1.75
Torque Wrenches
End Cap Kit and Locking Tool
Part No. 11698
‘P’Type wrenches have no scale.They must be set against a
torque testing device such as Norbar’s Professional Torque Tester
(see page 68).
Professional Torque Wrench
Production ‘P’ Types
‘P’ Type wrenches are designed for the production environment where they will be set
and then dedicated to a particular application. There is no scale, the wrench must be set
against a torque testing device such as Norbar’s Professional Torque Tester (see page 68).
‘P’ Type wrenches are available with two ratchet types – ‘Industrial’ and ‘Automotive’ (see
explanation on pages 18 and 19) and as ‘Torque Handles’ for interchangeable end fittings.
Ratchet Torque Wrench Production ‘P’ Type - Automotive Ratchet
Model
Square
Drive
in
Part No.
Range
N.m
lbf.ft
8 – 60
5 – 45
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
60 ‘P’
3
11164
60 ‘P’
1
11171
8 – 60
100 ‘P’
3
11138
20 – 100
100 ‘P’
1
11139
20 – 100
15 – 80
31
200 ‘P’
1
11140
40 – 200
30 – 150
41
⁄8
⁄2
⁄8
⁄2
⁄2
31
72
286
0.6
5 – 45
31
72
286
0.6
15 – 80
31
72
326
0.69
72
326
0.69
72
423
1.0
Ratchet Torque Wrench Production ‘P’ Type - Industrial Ratchet
Model
Square
Drive
in
Part No.
Range
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
N.m
lbf.ft
13051
8 – 60
5 – 45
35
72
291
0.62
13052
8 – 60
5 – 45
40
72
299
0.69
3
13053
20 – 100
15 – 80
35
72
332
0.68
100 ‘P’
1
13054
20 – 100
15 – 80
40
72
338
0.74
200 ‘P’
1
13055
40 – 200
30 – 150
42
72
422
0.96
300 ‘P’
1
13057
60 – 300
45 – 220
49
60
663
1.45
400 ‘P’
3
13056
80 – 400
60 – 300
49
60
663
2.04
60 ‘P’
3
60 ‘P’
1
100 ‘P’
⁄8
⁄2
⁄8
⁄2
⁄2
⁄2
⁄4
21
www.norbar.com
Professional Torque Wrench
Models 550 - 1500
• Accuracy of ±3% of reading.
• Traceable calibration certificate supplied.
• Non length dependent. Extension handle can be used to reduce operator effort (handle
supplied as standard with Model 800, 1000 and 1500).
• Positive ‘click’ can be heard, seen and felt.
• Low weight - Model 1000 just 5.8kg.
• Long scale length in N.m and lbf.ft allows error free setting.
• Fine 60 tooth ratchet allows the wrench to
be used in confined areas.
• Supplied in carry case for storage and protection.
Extension Handle Part No. 14142 - supplied as standard with Models 800 to 1500
Ratchet Adjustables
Model
550
800
800
1000
1000
1500
1500
Square
Drive
in
Part No.
⁄4
⁄4
1
3
⁄4
1
3
⁄4
1
14001
14015
14016
14002
14003
14004
14005
3
3
Range
N.m
lbf.ft
110 – 550 80 – 400
200 – 800 150 – 600
200 – 800 150 – 600
300 – 1000 220 – 750
300 – 1000 220 – 750
500 – 1500 370 – 1100
500 – 1500 370 – 1100
* Weight excluding extension handle. Extension handle, length 700 mm, weight 1.6 kg
22
Norbar - Total Torque Control
Ratchet Engagements Length
Diameter per revolution
mm
mm
61
75
75
75
75
75
75
60
60
60
60
60
60
60
845
1035
1035
1250
1250
1570
1570
Length Weight*
inc ext handle
mm
Kg
1535
1535
1750
1750
2070
2070
4.0
5.2
5.2
5.8
5.8
6.7
6.7
Torque Wrenches
Adjustable Torque Handles
Model
550 TH
550 TH
End Fitting
Part No.
14x18mm Female
22mm Male
14011
14012
Range
Length
Weight
N.m
lbf.ft
mm
Kg
110 – 550
110 – 550
80 – 400
80 – 400
790
780
3.6
3.6
Length
Weight
Available Fittings
See page 29
Torque Handles Production ‘P’ Type
Model
End Fitting
Part No.
550 THP 14x18mm Female
550 THP
22mm Male
14013
14014
Range
N.m
lbf.ft
mm
Kg
110 – 550
110 – 550
80 – 400
80 – 400
790
780
3.6
3.6
End Cap Kit and Locking Tool
Part No. 14166
Ratchet Torque Wrench Production ‘P’ Type
Model
Square
Drive
in
Part No.
550 ‘P’
800 ‘P’
800 ‘P’
1000 ‘P’
1000 ‘P’
1500 ‘P’
1500 ‘P’
⁄4
⁄4
1
3
⁄4
1
3
⁄4
1
14006
14017
14018
14007
14008
14009
14010
3
3
Range
N.m
lbf.ft
110 – 550 80 – 400
200 – 800 150 – 600
200 – 800 150 – 600
300 – 1000 220 – 750
300 – 1000 220 – 750
500 – 1500 370 – 1100
500 – 1500 370 – 1100
Ratchet Engagements Length
Diameter per revolution
mm
mm
61
75
75
75
75
75
75
60
60
60
60
60
60
60
845
1035
1035
1250
1250
1570
1570
Length Weight*
inc ext handle
mm
1535
1535
1750
1750
2070
2070
Kg
4.0
5.2
5.2
5.8
5.8
6.7
6.7
* Weight excluding extension handle. Extension handle, length 700 mm, weight 1.6 kg
23
www.norbar.com
Slimline™ Torque Wrench
Model SLO Fixed Head and Torque Handles
• Accuracy exceeds all international standards.
• Unmistakable signal when set torque is reached.
• Traceable calibration certificate supplied to satisfy ISO 9000:2000
quality systems.
• High quality 72 tooth ratchet allows use in confined spaces.
• Fixed head version has a push through square for left and
right handed torque tightening.
• Moulded grip aids correct handle location and operator comfort.
For 1 - 20 N.m ratchet torque wrenches, see the TruTorque range on
page 13.
Adjustable Wrenches - Fixed Head
Model
SL0 Fixed
SL0 Fixed
Square
Drive
in
Part No.
⁄8
⁄8
11035
11125
3
3
Range
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
N.m
lbf.in
1 – 20
4 – 20
10 – 180
40 – 180
-
-
Adjustable Torque Handles
Model
SL0 TH
SL0 TH
SL0 TH
24
End Fitting
16mm Spigot
16mm Spigot
9x12mm Female
Norbar - Total Torque Control
Part No.
11036
11126
11122
Range
Length
Weight
N.m
lbf.in
mm
Kg
1 – 20
4 – 20
4 – 20
10 – 180
40 – 180
40 – 180
207
210
205
0.4
0.4
0.4
211
213
0.4
0.4
Torque Wrenches
Slimline™ Torque Wrench
Model SLO ‘P’ Type
• Torque Handle versions are available for both 16mm spigot and 9 x 12mm
fittings.
• Production ‘P’ type versions are designed to discourage unauthorised alteration.
• ‘P’Type versions have no scale. These wrenches must be set against a torque
testing device such as Norbar’s Professional Torque Tester (see page 68).
Torque Handles Production ‘P’ Types
Model
Range
Part No.
End Fitting
SL0 THP 16mm Spigot
SL0 THP 9x12mm Female
11090
11088
Length
Weight
N.m
lbf.in
mm
Kg
1 – 20
1 – 20
10 – 180
10 – 180
207
203
0.4
0.4
Available Fittings
See pages 28 & 29
16mm Spigot
9x12mm Female
Ratchet and Fixed Head - Production ‘P’ Types
Model
Square
Drive
in
Part No.
SL0 ‘P’
SL0 ‘P’
SL0 Fixed
⁄4
⁄8
3
⁄8
11085
11086
11089
1
3
Range
N.m
lbf.in
1 – 20
1 – 20
1 – 20
10 – 180
10 – 180
10 – 180
Ratchet Head
Fixed Head
Ratchet Engagements Length Weight
Diameter per revolution
mm
mm
Kg
29
29
-
72
72
-
218
218
211
0.4
0.4
0.4
25
www.norbar.com
Industrial Torque Wrench
Adjustable Models
•
•
•
•
•
•
•
Robust construction gives accurate results, to ±4%, even in arduous working conditions.
Every wrench supplied with a calibration certificate to satisfy requirements of ISO 9000:2000.
The large break angle improves accuracy by reducing the possibility of over torquing.
Cam control of the mechanism gives a controlled break which will not throw the operator off balance.
Dual scaled, N.m and lbf.ft.
Supplied in a carry case for storage and protection.
If storage space is limited, for example in vehicle tool kits, models
4R to 5R can be supplied in two piece form where
the longer of the pieces is 900mm (see page 27).
• For 2000 N.m, see 6R Split Industrial on page 27
Carry case standard (except 4 TH and 4 THP)
Adjusting Scale
Ratchet Adjustables
Model
3AR
4R
4AR
5R
5AR
Part No.
Range
3/4”
1”
N.m
lbf.ft
12001
12006
12007
12009
12012
12001.01
12006.01
12007.01
12009.01
12012.01
100 – 500
150 – 700
200 – 800
300 – 1000
700 – 1500
70 – 350
100 – 500
150 – 600
200 – 750
500 – 1000
† Length with adjusting nut set to minimum torque.
26
Norbar - Total Torque Control
Ratchet Engagements Length † Weight
Diameter per revolution
mm
mm
Kg
70
70
70
70
70
36
36
36
36
36
910
1150
1250
1475
1475
5.2
6.3
6.4
7.3
10.4
Torque Wrenches
Industrial Torque Wrench
Torque Handles, Production ‘P’ Type and Split Models
• Robust construction gives accurate results, to ±4%, even in arduous working conditions.
• Every adjustable wrench supplied with a calibration certificate to satisfy requirements of
ISO 9000:2000.
• The break angle improves accuracy by reducing the possibility of over torquing.
• All models listed are also available as Production ‘P’ types with no setting scale.
These must be set against a torque testing device such as Norbar’s Professional Torque Tester.
See page 68.
• ‘P’Type Wrenches can be set by the factory or distributor on request.
Part code SQ2222.
• Supplied in a carry case for storage and protection
(except 4TH and 4THP).
Split Industrial in Box.
Adjustable and Production ‘P’ Type Torque Handles
Model
4 TH
4 THP
End Fitting
Range
Part No.
22mm Spigot
22mm Spigot
12003
12017
Available Fittings
See page 29
Length † Weight
N.m
lbf.ft
mm
Kg
130 – 550
130 – 550
100 – 400
100 – 400
935
835
4.6
4.6
† Length with adjusting nut set to minimum torque.
Ratchet Torque Wrench Split Adjustables
Model
4R
5R
6R
Range
Part No.
3/4”
1”
N.m
lbf.ft
12102
12101
-
12102.01
12101.01
12100
150 – 700
300 – 1000
900 – 2000
100 – 500
200 – 750
600 – 1500
Ratchet Engagements Length † Weight
Diameter per revolution
mm
mm
Kg
70
70
70
36
36
36
1150
1475
1920
6.3
7.3
13
‘P’Type - Sealed Adjustment
† Length with adjusting nut set to minimum torque.
27
Torque Handle Fittings - Fittings for 16mm Spigot
www.norbar.com
A/F Size
mm
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
30
32
Imperial - in
1
⁄4
5
⁄16
3
⁄8
7
⁄16
1
⁄2
9
⁄16
5
⁄8
11
⁄16
3
⁄4
13
⁄16
7
⁄8
15
⁄16
1
1 1⁄16
1 1⁄8
1 3⁄16
1 1⁄4
1 5⁄16
Open Ends
Part No. Max Torque*
(N.m)
Ring Ends
Part No. Max Torque*
(N.m)
Flare Ends
Part No. Max Torque*
(N.m)
29841
29842
29843
29844
29845
29846
29847
29848
29849
29850
29851
29876
29877
29852
29853
29854
29855
29856
29857
29858
29878
29861
29863
9
13
19
25
32
41
51
63
77
92
107
128
149
172
198
225
255
287
322
330
330
330
330
29881
29882
29883
29884
29885
29886
29887
29888
29889
29890
29891
29913
29914
29892
29893
29894
29895
29896
29897
29202.M26
29915
29202.M30
29202.M32
25
35
45
52
73
89
107
128
150
175
201
230
261
294
330
330
330
330
330
330
330
330
330
29921
29922
29923
29924
29925
29926
29927
29928
29929
29930
29931
29953
29954
29932
29933
29934
29935
29936
29955
29204.M30
29204.M32
4
7
9
12
16
25
28
31
38
46
53
65
74
86
100
112
123
143
150
200
200
29701
29702
29703
29704
29705
29706
29707
29708
29709
29710
29711
29712
29713
29714
29715
29716
29717
29718
7
13
21
32
48
67
90
118
150
187
230
281
330
330
330
330
330
330
29726
29727
29728
29729
29730
29731
29732
29733
29734
29735
29736
29737
29738
29739
29202.I18
29202.I19
29202.I20
29202.I21
25
35
42
73
115
170
226
260
305
330
330
330
330
330
330
330
330
330
29752
29753
29754
29755
29756
29757
29758
29759
29760
29761
29762
29763
29764
-
7
9
15
23
32
44
58
74
93
114
140
166
166
-
* Max torque values listed are proof torques quoted in BS 192:1982 & BS 3555:1988 (tested on hardened hexagon test stud).
For other available sizes contact Norbar
28
Norbar - Total Torque Control
Where the distance between centres differs
from 1.25 in (31.8mm) the torque applied
will not be as set on the wrench (see page
10)
Torque Wrenches
Fittings for 22mm Spigot
Torque Handle Fittings
Fittings for 16mm Spigot
Spanner End Fittings
Square
Drive
in
Part No.
⁄8
⁄2
29828
29827
3
1
Diameter
mm
in
19
25
0.75
1.0
Ratchet Heads
Reversible
Square - Part No.
Drive
in
⁄8
⁄8
1
⁄2
1
⁄2
3
3
29826
29829
29825
29830
Push Through
Diameter
mm
in
34
30.5
40
40
1.3
1.2
1.6
1.6
No.Teeth
Ratchet Type
36
72
72
72
Push Through
Reversible
Push Through
Reversible
Accessories for 16mm Spigot
Part No.
29832
85242
11343
72000
Part No. 29832
A/F Size
mm
Open End
Part No.
Ring End
Part No.
22
24
27
30
32
36
41
46
Imperial - in
11⁄8
13⁄16
11⁄4
15⁄16
17⁄16
11⁄2
29963.22
29963.24
29963.27
29963.30
29963.32
29963.36
29963.41
29963.46
29960.22
29960.24
29960.27
29960.30
29960.32
29960.36
29960.41
29960.46
29964.23
29964.24
29962.18
29962.19
29962.20
29962.21
29962.23
-
Accessories for 22mm Spigot
Part No.
29969
29972
85719
85720
Description
⁄4” Fixed Head
⁄4” Ratchet
Blank End Fitting for Open End
Blank End Fitting for Ring End
3
3
Description
Blank End Fitting for In-line Open End
Blank End Fitting for Open End
Blank End Fitting for Ring End
Spigot Adaptor 16mm to 22mm
Part No. 85242
Part No. 11343
Part No. 29969
Part No. 29972
Part No. 85719
Part No. 85720
Part No. 72000
29
Torque Multipliers
HT3 Torque Multiplier
• 5:1 torque multiplication, accuracy guaranteed
better than ±4%.
• Supplied with two reaction bar styles for
maximum versatility.
• Robust construction means minimal
maintenance and long life.
• Supplied in a carrying case, the Highwayman is
ideal for inclusion in the heavy vehicle tool kit.
• 1300 N.m version has a spare 3/4” output
square included in the kit.
• Multiplier head only (no reaction bars or plastic
box) also available. 1300 N.m version, part no.
17218. 2700 N.m version, part no. 17219.
HT3 1300 N.m
HT3 Torque Multiplier
Model
HT3
1300 N.m
Version Kit
HT3
2700 N.m
Version Kit
Part
No.
Range
A
B
C
D
N.m
Ratio Input Square Output
Square
lbf.ft
in
in
mm
mm
mm
mm
17220
1300
960
5:1
1
17221
2700
2000
5:1
3
Tool Reaction
Weight Weight
kg
kg
⁄2
3
⁄4
108
126
210
180
3.8
1.3
⁄4
1
108
128
210
186
3.8
1.3
Weight of entire kit, 7.1kg.
HT4 Torque Multiplier
B
• True 15.5:1 or 26:1 torque multiplication,
accuracy guaranteed better than ±4%.
• High ratios allow the use of a small torque
wrench.
• Robust construction means minimal
maintenance and long life.
• Supplied in carrying case with replacement
square drive.
• Anti Wind-Up Ratchet (Anti Backlash) fitted to
allow safer and more practical operation.
• Angle protractor for easy torque and angle
tightening.
HT4/26
A
HT4 Torque Multiplier
Model
HT4/15.5
HT4/26
Part
No.
17022
17021
Range
A
B
C
N.m
Ratio Input Square Output
Square
lbf.ft
in
in
mm
mm
mm
3000
4500
2200
3300
108
108
156
173
450
450
15.5:1
26:1
⁄2
⁄2
1
1
1
1
Tool Reaction
Weight Weight
kg
kg
6.1
7.0
1.9
1.9
35
www.norbar.com
Handtorque™ HT-52 and HT-72 Series
•
•
•
•
•
•
Compact dimensions allow excellent access and easy, safe handling.
Guaranteed accuracy of better than ±4%.
Anti Wind-Up Ratchet available, for easier and safer operation.
HT-72 features a light weight aluminium reaction arm.
A variety of alternative reaction styles are available for maximum versatility.
Electronic torque transducers can be fitted to the HT-72 for precise torque monitoring.
See page 83.
• Available in a variety of ratios and output square drive sizes.
HT-52/22
HT-72/25
HT-52 and HT-72 Series
Model
HT-52/4.5
HT-52/22
HT-52/22
HT-52/22
Fitted with AWUR
HT-52/22
Fitted with AWUR
HT-72/5
HT-72/5
HT-72/5
HT-72/25
HT-72/25
HT-72/25
Fitted with AWUR
HT-72/25
Fitted with AWUR
36
Part
No.
18087
18051
18052
18083
18084
18014
18015
18017
18018
18019
18081
18082
Norbar - Total Torque Control
Range
N.m
lbf.ft
1000
1000
1000
1000
1000
1000
1500
2000
1000
2000
1000
2000
740
740
740
740
740
740
1100
1450
740
1450
740
1450
Ratio
4.5:1
22:1
22:1
22:1
22:1
5:1
5:1
5:1
25:1
25:1
25:1
25:1
Input
Square
in
⁄2
⁄8
1
⁄2
3
⁄8
1
⁄2
1
⁄2
1
⁄2
3
⁄4
1
⁄2
1
⁄2
1
⁄2
1
⁄2
1
3
Output
Square
in
A
B
C
mm
mm
mm
Tool Reaction
Weight Weight
mm
kg
kg
⁄4
⁄4
3
⁄4
3
⁄4
3
⁄4
3
⁄4
1
1
3
⁄4
1
3
⁄4
1
52
52
52
52
52
72
72
72
72
72
72
72
115
139
139
150.1
150.1
144
144
144
165
165
174
174
131
131
131
131
131
165
165
165
165
165
165
165
150.3
175
175
186.3
186.3
188
188
188
188
188
218
218
3
3
D
1.02
1.4
1.4
1.6
1.6
2.4
2.4
2.4
2.7
2.7
3.0
3.0
0.85
0.85
0.85
0.85
0.85
0.66
0.66
0.66
0.66
0.66
0.66
0.66
Torque Multipliers
Handtorque™ Small Diameter Series
Handtorque models HT30, 45 and 60 have all the features of the Standard Series, but have a
higher torque output for a given gearbox diameter.
• Reduced diameter allows better access, particularly on pipe flanges.
• Reaction taken from high strength spline.
• Reaction foot can slide on the spline to allow for sockets of various lengths (except HT45).
• Anti Wind-Up Ratchet available on all models (except 5:1 ratios), allowing safer and more
practical operation.
• HT45 has integral angle protractor for easy torque and angle tightening.
HT45/26
Alternative 350mm
long, straight reaction
plate; may be modified
by customer to suit
their applications.
HT30 Part No. 16686
HT45 and HT60 Part
No. 16687
HT60/25
Small Diameter Series
Model
Part
No.
Range
N.m
lbf.ft
Ratio
mm
D
min
mm mm
Tool Reaction
D
max Weight Weight
mm
kg
kg
108
108
192
210.9
140
140
224.2
243.2
252.4
271.4
5.0
7.0
2
2
1
108
210.9
140
243.2
241.4
7.0
2
⁄2
1
108*
228
174
-
322
8.7
4
⁄2
1
1 ⁄2
119
256
174
311.5
337
10.6
4
⁄2
1 ⁄2
119
284.7
174
340.5
366
12.1
4
Input
Square
in
Output
Square
in
A
B
mm
⁄4
⁄2
1
1
⁄2
30/5
30/15
Fitted with AWUR
18003
18004
3000
3000
2200
2200
5:1
15:1
3
Fitted with AWUR
30/25
18006
3000
2200
25:1
1
Fitted with AWUR
45/26
18037
4500
3300
26:1
1
Fitted with AWUR
60/25
18008
6000
4400
25:1
1
60/125
18012
6000
4400
125:1
1
Fitted with AWUR
1
1
C
*Maximum width 140mm.
37
www.norbar.com
Handtorque™ Standard Series
Models to 3400
•
•
•
•
•
N.m
True torque multiplication guaranteed better than ±4%.
High ratios allow the use of a small torque wrench, multipliers can be used where access is limited.
Anti Wind-Up Ratchet available on models of 25:1 ratio.
Other reaction styles can be designed to suit specific applications.
Electronic torque transducers can be fitted for precise torque monitoring. See page 83.
HT5/25
HT2/5
Standard Series to 3400 N.m
Model
38
Part
No.
Range
N.m
lbf.ft
Ratio
Input
Square
in
Output
Square
in
A
B
mm
mm
C
C
Tool Reaction
min max Weight Weight
mm mm
kg
kg
⁄2
⁄4
1
⁄2
3
⁄4
1
1
108
108
108
106
126
141.5
83
83
83
217
217
217
3
3
5.6
2.2
2.2
2.2
⁄4
⁄2
1
1
119
119
142.1
167.6
86
86
264
264
4.7
7.5
2.5
2.5
⁄4
⁄2
11⁄2
11⁄2
119
119
144.7
172
86
86
264
264
4.7
7.5
2.5
2.5
1
2/5
2/25
Fitted with AWUR
16010
16012
16089
1700
1700
1700
1250
1250
1250
5:1
5:1
25:1
5/5
5/25
Fitted with AWUR
16014
16090
3400
3400
2500
2500
5:1
25:1
6/5
6/25
Fitted with AWUR
16016
16092
3400
3400
2500
2500
5:1
25:1
Norbar - Total Torque Control
1
3
3
1
3
1
Torque Multipliers
Handtorque™ Standard Series
Models to 47
,500
N.m
• True torque multiplication guaranteed better than ±4%.
• High ratios allow the use of a small torque wrench, multipliers can be used
where access is limited.
• Anti Wind-Up Ratchet available on models of 25:1 ratio and above.
• Electronic torque transducers can be fitted for precise torque monitoring.
See page 83.
• Other models available up to 300,000 N.m.
HT13/125
HT9/125
Standard Series to 47500 N.m
Model
Part
No.
Range
Ratio
Input
Square
in
Output
Square
in
A
B
mm
mm
C
C
Tool Reaction
min max Weight Weight
mm mm
kg
kg
⁄4
⁄2
1
⁄2
1 1⁄2
1 1⁄2
1 1⁄2
144
144
130
174.8
201.1
201.1
146
146
163.4
333
333
337
8.1
10.7
10.6
6.3
6.3
4.9
⁄2
1 1⁄2
144
226
146
333
12.2
6.3
⁄2
1 ⁄2
130
226
163.4
337
12.1
4.9
⁄4
1 1⁄2
184
200.1
171
351
17.4
8.3
⁄2
1 1⁄2
184
220.1
171
351
18.9
8.3
⁄4
⁄2
2 1⁄2
2 1⁄2
212
212
265.6
293.4
-
500
500
30.1
32.1
13.3
13.3
⁄4
2 1⁄2
240
337
-
-
41.5
6.5
⁄4
2 1⁄2
315
379
-
-
95.2
6.9
N.m
lbf.ft
16067
16065
16095
6000
6000
6000
4500
4500
4500
5:1
25:1
25:1
3
16068
6000
4500
125:1
1
7/125Sm.Dia
16096
Fitted with AWUR
6000
4500
125:1
1
7/5
7/25
Fitted with AWUR
7/25Sm.Dia
Fitted with AWUR
7/125
Fitted with AWUR
1
Fitted with AWUR
9/25
16070
9500
7000
25:1
3
Fitted with AWUR
9/125
16071
9500
7000
125:1
1
11/25
11/125
Fitted with AWUR
16082
16049
20000
20000
14700
14700
25:1
125:1
Fitted with AWUR
12/87.5
18085
34,000
25000
87.5:1
3
13/125
16053
47500
35000
125:1
3
Fitted with AWUR
3
1
1
39
Measurement and Calibration
TruCheck™ Models 3 N.m, 10 N.m and 25 N.m
Simple, Cost Effective Torque Testing
The importance of keeping your torque tools in peak calibration condition is well
established. Many businesses achieve this by using a third party calibration service.
However, how much more convenient would it be to perform calibration checks inhouse? Tools could be checked more frequently, immediately if a problem is suspected,
and tools would not need to leave site unnecessarily.
The main reasons that more companies do not perform calibration checks on their own
tools are the cost of testers and fears over the complexity of the testing equipment.
Norbar’s ‘TruCheck’ torque screwdriver testers aim to sweep aside these concerns.
They are very cost effective being significantly cheaper than most similar products on
the market and the basic version of the TruCheck particularly is very simple to use.
The product comes in two versions: there is a basic version, simply called ‘TruCheck’
and a version with greater functionality called ‘TruCheck Plus’.
TruCheck Plus 3 N.m and 10 N.m
TruCheck 25 N.m
Technical Specification
Accuracy: +/-1%, +/-1 digit over the stated operating range.
Display: 4 digit, 7 segment LED.
TruCheck 3 N.m and 10 N.m
Drive Size: 1/4” male hexagon (vertical)
Dimensions in mm: 64(d) x 175(w) x 72(h)
Weight: 2.6 kg shipping
TruCheck 25 N.m
Drive Size: 1/4” male hexagon (horizontal) - supplied with 1/4” and 3/8”
female square drive adaptors
Dimensions in mm: 72(d) x 175(w) x 64(h)
Weight: 2.6 kg shipping
Materials/Finish: Powder coated aluminium housing.
Stainless steel transducer shaft.
TruCheckTM
Model
Part No.
Range
TruCheck 3 N.m
TruCheck Plus 3 N.m
TruCheck 10 N.m
TruCheck Plus 10 N.m
TruCheck 25 N.m
TruCheck Plus 25 N.m
43253
43250
43254
43251
43255
43252
0.1 - 3 N.m
0.1 - 3 N.m
1 - 10 N.m
1 - 10 N.m
1 - 25 N.m
1 - 25 N.m
65
www.norbar.com
TruCheck™ Models 350 N.m, 1000 N.m and
2000 N.m
One of the concerns in putting a torque tester into an environment where people
are not calibration specialists is that incorrect selections will be made with the
potential for incorrect tool setting and consequently tool failure. Norbar’s solution
is to remove all choices from the operator. The TruCheck is for click type torque
wrenches and comes with a single measurement unit (N.m or lbf.ft).There is only
one button on the device and that is to zero the display. Operation is simplicity
itself and it is virtually impossible
to go wrong!
TruCheckTM
Model
Part No.
TruCheck 350 N.m
TruCheck 250 lbf.ft
TruCheck 1000 N.m
TruCheck 750 lbf.ft
TruCheck 2000 N.m
43221
43226
43230
43237
43244
TruCheck 10 - 350 N.m
10 -Range
350 N.m
10 - 250 lbf.ft
100 - 1000 N.m
75 - 750 lbf.ft
200 - 2000 N.m
Technical Specification
Accuracy: +/-1%, +/-1 digit over the stated operating range.
Display: 4 digit, 7 segment LED.
TruCheck 350 N.m and 250 lbf.ft
Drive Size: 1/2” female square
Dimensions in mm: 145.5(d) x 150(w) x 85(h)
Weight: 3.2 kg shipping
TruCheck 1000 N.m and 750 lbf.ft
Drive Size: 27mm male hexagon supplied with 3/4” square drive socket
Dimensions in mm: 145.5(d) x 175(w) x 85(h)
Weight: 4.8 kg shipping
TruCheck 2000 N.m
Drive Size: 27mm male hexagon supplied with 1” square drive socket
Dimensions in mm: 145.5(d) x 175(w) x 85(h)
Weight: ** kg shipping
Materials/Finish: Self coloured rigid polypropylene case.
Stainless steel transducer shaft and zinc plated steel base plate.
66
Norbar - Total Torque Control
Power Tool Test Fixture For TruCheckTM,
1000 N.m and 750 lbf.ft (Part Number 50757)
2000 N.m, (Part Number 50774)
These Power Tool Test Fixtures incorporate a Joint Simulation
Rundown Assembly, base plate, reaction plate, drive adaptors
and a reaction adaptor. When used in conjunction with a
TruCheck Plus 1000 or TruCheck Plus 2000, provides a cost
effective means of testing Norbar’s PTM-52, PTM-72 and
PT72 tools. The Joint Simulation elements can be purchased
separately for customers wishing to design their own reaction
fixtures; part number 50758 for 1000 N.m and 50775 for
2000 N.m. These joint simulators are not recommended for
use with impact or impulse type wrenches.
Measurement and Calibration
TruCheck™ Plus
Accepting that some customers require more flexibility than the basic TruCheck
provides, the ‘Plus’ adds a comprehensive range of features.With three modes of
operation the TruCheck Plus is suitable for click wrenches, dial and electronic
wrenches and in ‘Track’ mode will continuously monitor the torque signal.
There are three torque units - N.m, lbf.ft and lbf.in.
TruCheck Plus also has a user selectable ‘limit’ feature.The operator sets the target
torque and tolerance and the instrument will calculate whether the reading is
within tolerance and indicate the result by illuminating one of three coloured LEDs:
yellow = low, green = OK, red = high.
Finally,TruCheck Plus has an RS-232 serial data output and comes complete with an
RS-232 lead.The reading, measurement unit and limit status (Low, OK or High) are
output via RS-232.
TruCheck Plus 100 - 1000 N.m
3/4” socket is supplied
TruCheckTM Plus
Model
Part No.
TruCheck Plus 350 N.m
TruCheck Plus 1000 N.m
TruCheck Plus 2000 N.m
43222
43231
43245
Range
10 - 350 N.m
100 - 1000 N.m
200 - 2000 N.m
Calibration Options
TruCheck instruments are supplied as standard with a traceable calibration certificate for the
clockwise direction. As an option, UKAS accredited calibration certificates from Norbar’s
laboratory can be supplied, either clockwise only or clockwise and counter clockwise.
Part No.
TCACC.CW
TCACC.CW+CCW
Description
UKAS accredited calibration clockwise
UKAS accredited calibration clockwise and counter clockwise
Note: UKAS accredited calibration is from 5% to 100% of full scale for part numbers
43243, 43221, 43226, 43222 43250, 43251, 43253 & 43255 and
10% to 100% for part numbers 43230, 43231, 43237, 43244, 43245, 43251 & 43254.
67
www.norbar.com
Professional Torque Tester (Pro-Test) – Series 2
The accuracy, ease of use and price competitiveness of the Pro-Test instrument has made it the
choice of many industrial, military and automotive customers worldwide. The Pro-Test Series 2 has
many features designed to make life easier and reduce the opportunities for error when calibrating
torque wrenches.
Features
• Pictorial display panel for easy mode selection.
• Limit detection with low, pass and high indication both on the screen, and by coloured LEDs.
Limit status is also output via RS-232-C. Target torque and tolerance can be set by the operator.
• ISO 6789 calibration mode automatically calculates the torque wrench calibration points and
tolerance. All the user has to do is set the maximum calibration point for the wrench – the
instrument does the rest for you!
• Memory function displays the 5 previous readings taken by the operator. For operators creating
manual calibration certificates, there is no need to stop and write after each reading, hence speeding
the process.
• Carry case is now a standard feature.
• RS-232 cable included as standard.
Pro-Test display and transducer in carry case.
Flexible mounting options of Pro-Test on Bracket, Part No. 62198
68
Norbar - Total Torque Control
Measurement and Calibration
Professional Torque Tester (Pro-Test) – Series 2
• Supplied with UKAS accredited calibration certificate.
• Guaranteed classification to BS7882:2008, Class 1 or better over the primary calibration
range (20% to 100% of full scale), Class 2 or better over the secondary calibration range
(lowest calibrated value to 20% of full scale). Class 1 equates to ±0.5% of reading.
• Three transducers are available in the range, up to 1500 N.m (1100 lbf.ft).
• Three essential operating modes allow the Pro-Test to be used with all torque wrench
types: ‘Track’ displays the live value, ‘Peak Memory’ records the highest value and ‘First
Peak Memory’ records the first peak of torque (for click type torque wrenches). Both
memory modes can be used with manual or automatic reset.
• Large back lit display is easily visible from a distance and in poor light.
• All common units of torque measurement are included.
• User can select the language they wish to work in (most European languages are
included).
• Transducer can be mounted for torque wrench operation in the horizontal or
vertical plane.
• RS-232-C is included for the output of reading to a printer, PC, data capture unit, SPC
software etc.
• Optional mounting plate, Part No. 62198 gives greater flexibility of mounting options.
• All user settable parameters are menu selectable from the front panel.
• As standard, all transducers are calibrated in a clockwise direction. For additional anti
clockwise direction order Part No. PROTEST.CCW.
Measure Screen
Limit type selection
Pro-Test
Model
Part
No.
Operating
Range
N.m
Calibrated
Range
N.m
System
Resolution
N.m
Pro-Test 60
Pro-Test 400
Pro-Test 1500
43218
43219
43220
0 - 60
0 – 400
0 – 1500
1.2 – 60
8 – 400
30 – 1500
0.001
0.01
0.1
Input Hex Square Drive
Adaptor
A/F
mm
in
10
22
36
⁄4 + 3⁄8 + 1⁄2
⁄8 + 1⁄2 + 3⁄4
3
⁄4
1
3
Pro-Test Ancillaries
Part No.
Description
60253
62198
PROTEST.CCW
12V DC Power Supply*
Mounting Plate
Pro-Test Counter Clockwise Calibration
* Option only necessary when powering from a 12V DC vehicle battery.
69
www.norbar.com
Torque Screwdriver Tester (TST) - Series 2
The TST combines simplicity with up to date technology to provide a high quality
instrument for the testing and calibration of low capacity torque tools.
Featuring an internal transducer complete with Joint Simulation Rundown Assembly,
the TST is available in 3 torque ranges, 0.04 to 2 N.m, 0.5 to 10 N.m and 1.25 to 25
N.m. Class 1 system accuracy over its Primary range (±0.5% of reading from 20%
to 100% of full scale).
What makes the TST genuinely versatile is the interface for an external transducer.
This interface, accessed by a 2 way switch in the TST, allows the connection of any
transducer from Norbar’s “SMART” range and most mV/V calibrated transducers
from Norbar or other manufacturers.
Norbar is UKAS accredited for the calibration of electrical torque indicator
displays and the TST is supplied with a calibration certificate.This ensures
that each element of the system is fully traceable and interchangeable.
The TST is also supplied with a UKAS torque calibration certificate
for the complete system i.e. display and internal transducer.
Back Panel
TST in standard carr y case,
70
Norbar - Total Torque Control
Measurement and Calibration
Torque Screwdriver Tester (TST) - Series 2
•
•
•
•
•
•
•
•
•
•
•
•
•
Pictorial display panel for easy mode selection.
Limit detection with low, pass and fail indication. Up to 12 target values can be set.
Digital limit state output for control of external tools.
Operation from fast charge internal battery pack (maximum time of 3 hours 20
minutes for full charge) or a.c. supply (90 to 264 Volts).
RS-232-C serial data interface for connection to a printer or PC. Continuous RS
232 output when used in track mode (up to 11 readings per sec).
Pulse count feature in Impulse mode and Clutch Tool mode.
“SMART” intelligence for transducer recognition.
Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
Analogue output allows the instrument to be used as part of a process control
system for performance analysis.
User selectable frequency response for each mode of operation.
All user selectable features have password protection.The instrument can be issued
to users with only the required modes of operation and units of measure enabled.
This feature can virtually eliminate operator induced errors.
Supplied in carry case.
All common measurement units for torque are included plus users can configure
their own units to interface with non torque transducers.
TST
Model
TST 2
TST 10
TST 25
Range
Part No.
43212
43213
43214
N.m
lbf.in
0.04-2
0.5-10
1.25-25
0.4-20
5-100
12.5-250
TST Ancillaries
Part No.
Description
60216.200
60217.200
TST.CCW
50539*
50540*
50541*
TST to 10 Way lead, for Norbar Rotary Transducers
TST to 6 Way lead, for Norbar Static & Annular Transducers
TST Counter Clockwise Calibration
Joint Simulation Rundown Assembly 2 N.m
Joint Simulation Rundown Assembly 10 N.m
Joint Simulation Rundown Assembly 25 N.m
*The TST comes with a Joint Simulation Rundown Assembly as standard.
These Part No.s are for replacement or additional fixtures only.
Limit Setting Screen
Accuracy when used with external transducer port:
Input Voltage Equivalent torque
Accuracy
Calibration uncertainty*
@0.5 mV
5% of full scale
±0.1% of reading
@1.0 mV
10% of full scale
±0.05% of reading
@2.0 to 18.9 mV 20% to 110% full scale ±0.05% of reading
±0.13%
±0.08%
±0.06%
Measure Screen
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution:
Weight:
Dimensions:
5 digits for all Norbar transducers.
2.2 kg (4.8 lb).
160 mm deep x 288 mm wide x 72 mm high.
71
www.norbar.com
Torque Tool Tester (TTT) - Series 3
The TTT shares all of the extensive features of the TST except that it has no internal
transducer. Instead, the TTT offers not one but three external transducer interfaces allowing
any three transducers to be simultaneously connected. Selection between the transducers is
made by a rotary switch at the back of the instrument case.
Any transducer from Norbar’s “SMART” range and most mV/V calibrated transducers from
Norbar or other manufacturers can be connected to the TTT. The “SMART” feature means
that once a transducer has been connected, the instrument will automatically recognise
calibration details such as mV/V output, serial number and capacity.
Norbar is UKAS accredited for the calibration of electrical torque indicator
displays and the TTT is supplied with a calibration certificate.This ensures
that each element of the system is fully traceable and interchangeable.
Back panel
TTT in standard carr y case.
STB1000 Transducer also shown.
72
Norbar - Total Torque Control
Measurement and Calibration
Torque Tool Tester (TTT) - Series 3
•
•
•
•
•
•
•
•
•
•
•
•
•
Pictorial display panel for easy mode selection.
Limit detection with low, pass and fail indication. Up to 12 target values can be set.
Digital limit state output for control of external tools.
Operation from fast charge internal battery pack (maximum time of 3 hours 20
minutes for full charge) or a.c. supply (90 to 264 Volts).
RS-232-C serial data interface for connection to a printer or PC. Continuous RS
232 output when used in track mode (up to 11 readings per sec).
Pulse count feature in Impulse mode and Clutch Tool mode.
“SMART” intelligence for transducer recognition.
Memory for calibration details of 20 non-“SMART” mV/V calibrated transducers.
Analogue output allows the instrument to be used as part of a process control
system for performance analysis.
User selectable frequency response for each mode of operation.
All user selectable features have password protection.The instrument can be
issued to users with only the required modes of operation and units of measure
enabled.This feature can virtually eliminate operator induced errors.
Supplied in carry case.
All common measurement units for torque are included plus users can configures
their own units to interface with non torque transducers.
TTT
Part No.
Description
43228
Torque Tool Tester
TTT Ancillaries
Part No.
Description
60216.200
60217.200
TTT.CCW
TTT to 10 Way lead, for Norbar Rotary Transducers
TTT to 6 Way lead, for Norbar Static & Annular Transducers
TTT Counter Clockwise Calibration
Details of connected transducer displayed by pressing # key.
Accuracy:
Input Voltage Equivalent torque
Accuracy
Calibration uncertainty*
@0.5 mV
5% of full scale
±0.1% of reading
@1.0 mV
10% of full scale
±0.05% of reading
@2.0 to 18.9 mV 20% to 110% full scale ±0.05% of reading
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution:
Weight:
Dimensions:
±0.13%
±0.08%
±0.06%
Language setting
5 digits for all Norbar transducers.
1 Kg (2.2 lb).
150 mm high x 200 mm wide x 180 mm deep.
73
www.norbar.com
T-Box and TDMS (Torque Data Management System)
T-Box shown with Neck Strap and Mounting
Bracket.
The T-Box together with Norbar’s Torque Data Management System (TDMS) software provides
the complete solution for torque tool calibration, data logging and data management and archiving
on your PC.
• T-Box features a colour 5.7” (145 mm) touch screen LCD display with graphic on screen icons
for simple tool selection. Feature modes include Click Hydraulic, Pulse and Stall tools that
enable the most common torque products to be tested by a simple touch of the screen.
• T-Box also features a new “Pulse Tool Mode” which uses a mathematical algorithm to accurately
determine the output torque from Impulse tools.
• T-Box comes pre-loaded with Tool Templates for the entire Norbar product range of Torque
Wrenches and Pneutorqes® enabling the user to simply assign individual tools to perform
calibrations to the relevant ISO standard. Other tool templates can be created by the operator.
• Graphical analysis and display of joint profiles are available using the Graph Mode.
• T-Box can connect up to 4 Smart Transducers including transducers with angle capabilities for
instant connectivity. Alternatively, non Norbar transducers with a mV/V output can be
programmed into the T-Box memory.
• T-Box has 2 USB ports, one RS232 serial port and an ancillary connection (USB cable supplied
as standard).
• T-Box can log data at a rate of 5 readings per second or can be set to log torque data at the
required angle increment, for example, take a torque reading at every degree.
T-Box mode screen.
74
Norbar - Total Torque Control
T-Box Language selection screen.
T-Box Instrument screen.
Measurement and Calibration
T-Box and TDMS
• T-Box is supplied with Norbar’s new Torque Data Management System software
(TDMS) for complete tool data management and archiving on your PC.
• TDMS enables data to be viewed graphically, in an SPC format, or as a Calibration
Certificate (available in English, French, German, Italian, Spanish and Russian).
• T-Box contains a large capacity memory that will enable a user to collect data and
store in excess of 100,000 individual test results directly to the instrument and
then synchronise to the TDMS software.
T-Box kit includes: • T-Box instrument complete with UKAS accredited bi-directional calibration
certificate
• Carry Case
• Quick Reference Guide
• Mounting foot and bolts
• Neck strap and mounting kit
• Power supply with appropriate local mains supply cable (100 - 240 v)
• USB cable
• USB memory stick pre-loaded with TDMS software
• T-Box Operator’s Handbook
• TDMS Operator’s Handbook.
T-Box & TDMS
Part No.
Description
43236
61129
T-Box Instrument with TDMS Software
TDMS Software (supplied on USB Flash Drive)
T-Box Accessories
Part No.
Description
60216.200
60217.200
60223.200
60248
T-Box to 10 way lead, for Norbar Rotary Transducers
T-Box to 6 way lead, for Norbar Static and Annular Transducers
T-Box to no connector (for non-Norbar Transducers)
Serial Data Lead Kit
Torque vs Angle graph produced using TDMS software
Accuracy:
Input Voltage
Equivalent torque
Accuracy
Calibration uncertainty*
@0.5 mV
5% of capacity
±0.1% of reading
@1.0 mV
10% of capacity
±0.05% of reading
@2.0 to 18.9 mV 20% to 120% of capacity ±0.05% of reading
±0.13%
±0.08%
±0.06%
*Using a coverage factor of k=2, to give a confidence level of approximately 95%.
Resolution:
5 active digits for all Norbar transducers.
Weight (T-Box only): 1.5 Kg (3.3 lb).
Dimensions:
162 mm high x 205 mm wide x 60 mm deep.
Torque and Angle vs Time graph produced using TDMS software
75
www.norbar.com
Flange Mounted Transducers - FMT
Flange Mounted Transducers incorporate mounting points for securely fixing the transducer to the
working surface.The transducer lead is also included and is fitted with a high quality Lemo® connector,
suitable for attachment to TST and TTT instruments.
• Classified to BS7882:2008, typically better than Class 1 for the primary classification range
(±0.5% of reading from 20% to 100% of full scale).
• “SMART” – TST and TTT instruments will automatically recognise calibration details.
• Joint Simulation Rundown Assembly is included on transducers up to 150 N.m (100 lbf.ft) allowing joint
simulation for power tool testing.
• Supplied with UKAS calibration certificate.
• Transducers are supplied with precision made square drive adaptors.
1500 N.m Transducer
S.I Calibrated Transducers
Capacity
Part No.
Range
Square Drives
Supplied - in
2 N.m
10 N.m
25 N.m
150 N.m
400 N.m
1500 N.m
50671.xxx
50672.xxx
50673.xxx
50674.xxx
50675.xxx
50676.xxx
0.04-2 N.m
0.5-10 N.m
1.25-25N.m
7.5-150 N.m
20-400 N.m
30-1500 N.m
⁄4
⁄4
1
⁄4 + 3⁄8
3
⁄8 + 1⁄2
1
⁄2 + 3⁄4
1
⁄2 + 3⁄4 + 1
1
1
Part No.
Imperial Calibrated Transducers
Capacity
Part No.
Range
Square Drives
Supplied - in
20 lbf.in
100 lbf.in
250 lbf.in
100 lbf.ft
250 lbf.ft
1000 lbf.ft
50677.xxx
50678.xxx
50679.xxx
50680.xxx
50681.xxx
50682.xxx
0.4-20 lbf.in
5-100 lbf.in
12.5-250 lbf.in
5-100 lbf.ft
12.5-250 lbf.ft
20-1000 lbf.ft
⁄4
1
⁄4
1
⁄4 + 3⁄8
3
⁄8 + 1⁄2
1
⁄2 + 3⁄4
1
⁄2 + 3⁄4 + 1
Norbar - Total Torque Control
50539
1
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example: 50671.LOG). For
connection to a non Norbar instrument or when a mV/V certificate is required, select .IND.
76
Joint Simulation Rundown Assemblies
for Flange Mounted Transducers
50540
50541
50692
Range
0.04 – 2 N.m
0.4 – 20 lbf.in
0.5 – 10 N.m
5 – 100 lbf.in
1.25 – 25 N.m
12.5 – 250 lbf.in
7.5 – 150 N.m
5 – 100 lbf.ft
A/F Size of
Hex Screws
⁄4”
1
⁄4”
1
⁄4”
1
14 mm
The above Joint Simulation Rundown Assemblies are supplied with
the Flange Mounted Transducer as standard, but can also be ordered
separately.
Measurement and Calibration
2 N.m Transducer
150 N.m Transducer
Large Mounting Bracket, Part No.
62220 suitable for 150 N.m to
1500 N.m Transducers
Small Mounting Bracket, Part No.
62221 suitable for 2 N.m to
400 N.m Transducers
“SMART” Torque Block - STB
• Classified to BS7882:2008, typically better than Class 1 for the primary classification range
(±0.5% of reading from 20% to 100% of full scale).
• “SMART” – TST and TTT instruments will automatically recognise calibration details.
• Supplied with UKAS accredited calibration certificate.
There are two models, STB1000 and STB3000.Transducer Lead is incorporated and is terminated in a Lemo®
connector suitable for the TST and TTT.
S.I. Calibrated Transducers
Model
Part No.
Range
STB1000
STB3000
50683.xxx
50684.xxx
20-1000 N.m
150-3000 N.m
Square Drives - in
⁄2 + 3⁄4
⁄4 + 1
1
3
Select part no. suffix .LOG if the transducer is to be connected to TST and TTT
(example: .LOG). For connection to a non Norbar instrument or when a mV/V certificate is required, select .IND.
Joint Simulation Rundown Assemblies
for STB1000
Part No.
50693
50694
Range
10 – 140 N.m
10 – 100 lbf.ft
100 – 700 N.m
70 – 500 lbf.ft
A/F Size of Hex
Screws - mm
12
19
77
www.norbar.com
Static Torque Transducer
The accuracy and quality of the Norbar Static Torque Transducers has made them the first choice of
many calibration laboratories throughout the world.
• Up to 6800 N.m (5000 lbf.ft) classified to BS7882:2008, typically Class 1 or better for the primary
classification range (±0.5% of reading from 20% to 100% of full scale).
• From 6800 N.m (5000 lbf.ft) up to 108,500 N.m (80,000 lbf.ft) classified to BS7882:2008, Class 1 to
Class 5 for the classification range (±0.5% to _+/-2.5% of reading) dependant on the type of transducer.
• Robust, heat treated, alloy steel torsion shaft design.
• Designed to ignore non torsional forces.
• Operates in clockwise and anti-clockwise directions.
• Calibration up to 108,500 N.m (lbf.ft) with a UKAS accredited calibration certificate.
• Calibrated in clockwise direction as standard. Anti-clockwise calibration provided on request.
• ‘SMART’ transducers have built in memory circuit which contains essential information about the
transducer.This information can be read by Norbar’s TST and TTT instruments meaning that when the
transducer is connected, it is immediately recognised and ready for use.When ordering for a TST or TTT,
use part no. suffix ‘.LOG’ (eg. 50659.LOG) if you require a torque units calibration certificate.
• ‘SMART’ transducers can also be used with many instruments not of Norbar manufacture. However,
these will operate as normal ratio calibrated (mV/V) transducers – the ‘SMART’ data will not be read.
For non Norbar instruments or for when a mV/V certificate is required, use part code suffix ‘.IND’.
S.I Calibrated Transducers
Capacity
Part No.
Sq. Drive
in
1 N.m
2.5 N.m
5 N.m
10 N.m
25 N.m
50 N.m
100 N.m
250 N.m
250 N.m
500 N.m
1000 N.m
2500 N.m
5000 N.m
7000 N.m
10000 N.m
25000 N.m
25000 N.m
50000 N.m
80000 N.m
100000 N.m
50587.IND*
50588.xxx
50589.xxx
50590.xxx
50591.xxx
50592.xxx
50593.xxx
50594.xxx
50701.xxx
50596.xxx
50772.xxx
50703.xxx
50599.xxx
50669.xxx
50776.xxx
50603.xxx
50778.xxx
50781.xxx
50783.xxx
50607.xxx
⁄4 m/f
⁄4 m/f
1
⁄4 m/f
1
⁄4 m/f
3
⁄8 m/f
3
⁄8 m/f
1
⁄2 m/f
1
⁄2 m/f
3
⁄4 m/f
3
⁄4 m/f
1 m/f
11⁄2 m/f
11⁄2 m/f
11⁄2 m/f
21⁄2 m/f
21⁄2 m/m
21⁄2 m/f
21⁄2 m/f
31⁄2 m/m
31⁄2 m/f
1
1
Dimensions (mm)
A
BØ
C
79
79
79
79
79
79
79
79
118
118
118
117
117
117
145.5
68.5
145.5
145.5
205
98
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
54
54
54
95
95
95
130
110
130
130
160
165
*Not suitable for TST and TTT.
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example: 50588.LOG). For
connection to a non Norbar instrument or when a mV/V certificate is required, select .IND.
78
Norbar - Total Torque Control
86
86
86
86
89.5
89.5
92.8
92.8
141
141
146
160
160
160
209
200
209
209
291.5
271
Bench Stand
50211
50211
50211
50211
50212
50212
50213
50220
50220
50221
50127
50127
50127
-
Measurement and Calibration
Static Torque Transducer
3/4” Square Drive
Transducer
31/2” Square Drive
Transducer
3/8” Square Drive
Transducer
21/2” Square Drive
Transducer
Imperial Calibrated Transducers
Capacity
Part No.
Sq. Drive
in
100 ozf.in
1000 ozf.in
10 lbf.in
25 lbf.in
50 lbf.in
100 lbf.in
250 lbf.in
500 lbf.in
1000 lbf.in
1 lbf.ft
2.5 lbf.ft
5 lbf.ft
25 lbf.ft
50 lbf.ft
100 lbf.ft
250 lbf.ft
250 lbf.ft
500 lbf.ft
1000 lbf.ft
2500 lbf.ft
5000 lbf.ft
10000 lbf.ft
25000 lbf.ft
25000 lbf.ft
30000 lbf.ft
50000 lbf.ft
60000 lbf.ft
100000 lbf.ft
50609. IND*
50616.xxx
50610. IND*
50612.xxx
50614.xxx
50617.xxx
50619.xxx
50621.xxx
50623.xxx
50611.xxx
50613.xxx
50615.xxx
50620.xxx
50622.xxx
50624.xxx
50625.xxx
50702.xxx
50627.xxx
50773.xxx
50704.xxx
50630.xxx
50777.xxx
50635.xxx
50779.xxx
50780.xxx
50636.xxx
50782.xxx
50637.xxx
⁄4 m/f
⁄4 m/f
1
⁄4 m/f
1
⁄4 m/f
1
⁄4 m/f
1
⁄4 m/f
3
⁄8 m/f
3
⁄8 m/f
1
⁄2 m/f
1
⁄4 m/f
1
⁄4 m/f
1
⁄4 m/f
3
⁄8 m/f
3
⁄8 m/f
1
⁄2 m/f
1
⁄2 m/f
3
⁄4 m/f
3
⁄4 m/f
1 m/f
11⁄2 m/f
11⁄2 m/f
21⁄2 m/f
21⁄2 m/m
21⁄2 m/f
21⁄2 m/f
31⁄2 m/m
31⁄2 m/f
31⁄2 m/m
1
1
Dimensions (mm)
A
BØ
C
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
79
118
118
118
117
117
145.5
68.5
145.5
145.5
98
205
98
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
36.5
54
54
54
95
95
130
110
130
130
165
160
165
* Not suitable for TST and TTT
Select part no. suffix .LOG if the transducer is to be connected to TST or TTT (example: 50616.LOG). For
connection to a non Norbar instrument or when a mV/V certificate is required, select .IND.
86
86
86
86
86
86
89.5
89.5
92.8
86
86
86
89.5
89.5
92.8
92.8
141
141
146
160
160
209
200
209
209
271
291.5
271
Bench Stand
50211
50211
50211
50211
50211
50211
50212
50212
50213
50211
50211
50211
50212
50212
50213
50220
50220
50221
50127
50127
-
79
www.norbar.com
Bench Stands
• Ensures the correct mounting of Norbar’s Static Torque Transducers up to 5000 N.m (5000 lbf.ft).
• All bench stands (except Extra Large) are machined to accept Norbar Joint Simulation Rundown
Assemblies for power tool testing and calibration.
• For transducers in the range 1 N.m to 10 N.m (100 ozf.in to100 lbf.in),Torque Limiting Bench
stands are available.These are designed to prevent transducer
over-load.
• All ‘Small Frame Size’ Bench Stands can be mounted horizontally or
vertically.
Large Bench Stand
Extra Large Bench Stand
Transducer Bench Stands
Part No.
60210
60211
60212
50211
50212
50213
50220
50221
50127
Model Description
Torque Limiting (set to 1.6 N.m)
Torque Limiting (set to 8.1 N.m)
Torque Limiting (set to 16 N.m)
Small Frame Size (10 N.m)
Small Frame Size (50 N.m)
Small Frame Size (100 N.m)
Large Frame Size (500 N.m)
Large Frame Size (1000 N.m)
Extra Large Size (5000 N.m)
Sq. Drive
in
A
⁄4
⁄4
1
⁄4
1
⁄4
3
⁄8
1
⁄2
3
⁄4
1
11⁄2
50
50
50
50
50
50
70
70
105
1
1
Dimensions (mm)
B
C
D
65
65
65
65
65
65
87
87
280
96
96
96
96
96
96
150
150
152
56
56
56
56
56
56
79
79
240
EØ
8.5
8.5
8.5
8.5
8.5
8.5
13.5
13.5
16.5
Transducer Leads
Part No.
Description
60152.225
51067.225
60217.200
60216.200
60223.200
60225.200
60224.200
ETS to 6 way transducer
ETS to 6 way transducer
Pro-Log,TST & TTT to 6 way transducer
Pro-Log,TST & TTT to 10 way transducer
Pro-Log,TST & TTT to no connector
6 way transducer to no connector
10 way to no connector
For use with
Post 1994 ETS and 5 way Switch Box Model 60163
Pre 1994 ETS and 5 Way Switch Box Model 60055
All ‘Smart’ Static and Annular transducers
All Rotary transducers with .IND or .LOG Part No. suffix
Non Norbar transducers
Norbar 6 way connector to a non Norbar instrument
Norbar Rotary transducer to a non Norbar instrument
The Part No. suffix indicates the length of the cable, ie. .225 is 225cm (2.25m). Other cable lengths available on
request. Please use suffix to indicate required length (preferably in whole meter increments).
80
Norbar - Total Torque Control
D
E
A
B
C
Measurement and Calibration
Joint Simulation Rundown Assemblies
The Norbar Joint Simulation Rundown Assemblies are designed to simulate the working
conditions of screwed or bolted joints. Used in conjunction with a Norbar transducer,
bench stand and display instrument, the output of torque controlled power tools can be
measured against a range of simulated joint rates, from hard through to soft.
• Suitable for a wide variety of power tools including pneumatic/electric
screwdriver and angle wrenches with either clutch or stall
torque control.
• Models available for torques from 0.2 N.m to 500 N.m
(2 lbf.in to 500 lbf.ft).
• Spring washers and full instructions are provided
to simulate a wide range of joint types as detailed in:
BS6268:1982 , BS6544:1981, ISO5393:1981.
Joint Simulation Rundown Assemblies for Static Transducers
Part No.
Range
Socket
in
50313
1
⁄4
50251
1
50252
3
50253
1
50254
3
⁄4
⁄8
⁄2
⁄4
0.2 - 2 N.m
2 - 20 N.m
2 - 10 N.m
20 - 100 lbf.in
5 - 50 N.m
5 - 50 lbf.ft
10 - 100 N.m
10 - 100 lbf.ft
100 - 500 N.m
100 - 500 lbf.ft
Bench Stand
Required
A/F Size of Hex
Screws - mm
50211
5
50211
5
50212
8
50213
10
50220
19
Power Tool Test Fixture RD 5000
The RD5000 is designed for testing the output of powered torque
controlled tools up to 5000 lbf.ft (6800 N.m).A suitable 11⁄2” square
drive Norbar Static Transducer, Lead and Display Instrument are also
required for a complete system. For testing tools up to 1500 N.m,
please order the alternative washer stack, part number 50548.2.
RD 5000 and Ancillaries
Part No.
Description
50548
50548.1
50548.2
135 - 6780 N.m (100 - 5000 lbf.ft) Power Tool Test Fixture
Nut and Bolt Kit UNC
Washer Stack 1500 N.m
81
www.norbar.com
Rotary Torque Transducer
These transducers are designed to measure the torque output
from rotating shafts, particularly torque controlled power tools
including impulse wrenches.
• Classified to BS7882:2008, typically better than
Class 1 for the primary classification range
(±0.5% of reading from 20% to 100% of full scale).
• “SMART” – TST and TTT instruments will
automatically recognise calibration details.
• Supplied with a UKAS accredited calibration certificate.
• Designed to give excellent performance with
impulse tools.
• Optional angle measurement – contact Norbar
for details.
Rotary Torque Transducers – S.I. Calibration
Capacity
5 N.m
20 N.m
20 N.m
75 N.m
200 N.m
250 N.m
500 N.m
1500 N.m
Maximum RPM*
Sq. Drive
in
Continuous Intermittent
A
⁄4” m/f Hex
⁄4” m/f Hex
1
⁄4” m/f
3
⁄8” m/f
1
⁄2” m/f
3
⁄4” m/f
3
⁄4” m/f
1” m/f
116
116
71.5
77
87
106
106
125
Part No.
50708.xxx
50709.xxx
50710.xxx
50711.xxx
50712.xxx
50713.xxx
50714.xxx
50715.xxx
1
1
5000
5000
5000
5000
2500
2000
2000
1000
11000
11000
11000
11000
7600
5000
5000
4400
B
Dimensions (mm)
C
D
E
F
G
30
30
30
30
42
52
52
63
68
68
71.5
74
82.5
93.5
93.5
104
13
13
13
15
21
26
26
31.5
39
39
6
8
12
21
21
29
25.5
25.5
-
A
B
Dimensions (mm)
C
D
E
F
G
116
116
71.5
77
87
106
106
125
30
30
30
30
42
52
52
63
68
68
71.5
74
82.5
93.5
93.5
104
56
56
56
56
58
60
60
64.5
39
39
6
8
12
21
21
29
25.5
25.5
-
56
56
56
56
58
60
60
64.5
Rotary Torque Transducers – Imperial Calibration
Capacity
Part No.
50 lbf.in
15 lbf.ft
15 lbf.ft
50 lbf.ft
150 lbf.ft
200 lbf.ft
300 lbf.ft
1000 lbf.ft
50717.xxx
50718.xxx
50719.xxx
50720.xxx
50721.xxx
50722.xxx
50723.xxx
50724.xxx
Maximum RPM*
Sq. Drive
in
Continuous Intermittent
⁄4” m/f Hex
⁄4” m/f Hex
1
⁄4” m/f
3
⁄8” m/f
1
⁄2” m/f
3
⁄4” m/f
3
⁄4” m/f
1” m/f
1
1
5000
5000
5000
5000
2500
2000
2000
1000
11000
11000
11000
11000
7600
5000
5000
4400
13
13
13
15
21
26
26
31.5
* Continuous is defined as 100% usage at the given speed in either direction and intermittent as usage 10% of the total time at the given speed.
82
Norbar - Total Torque Control
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement