HPP-22 Manual ENG A4

Connecting Method

Run PC Program first, then connect HPP-22 with PC using a USB Cable.

PC Programmer for Hitec Transmitters & Receivers

1. About HPP-22

Congratulations! Welcome to the next generation of Hitec RC.

We greatly appreciate your purchase of the HPP-22.

The HPP-22 will enable you to connect your Hitec radio equipment to your PC,

allow you to upgrade the firmware in selected Hitec radios and receivers, adjust a settings,

and even download telemetry data collected from the plane using the optional

Hitec sensor station and sensors.

2. Specs

Product Name : HPP-22

Compatible OS : Windows ® XP and Windows VISTA™.

Connection : USB A to Mini B 5-Pin 2.0 Cable

USB Interfaced (No Additional Battery Required)

Easy Operation with PC Program (Program Available on the Website)

PC Interface for Hitec 2.4GHz Telemetry Monitoring System

(with Sensor Station & Optional Sensors)

Functions:

Radio, Module, and Receiver Firmware Upgrade

Radio, Module and Receiver Data Setting

Data Save & Load to PC

Date Reset

Auto Version Check

Plug and Play

3. Detailed Items in Box & Connecting Method

A. HPP-22, Receiver Cable (2Set), Radio Cable (1set), Manual.

HPP-22 Driver installation starts automatically.

Plug-in the appropriate cable to a the product you want to communicate with.

Please read a individual product’s instruction for connecting methods

B. USB A to Mini B 5-Pin Cable* required to connect to PC (Not included.)

We recommend to use maximum of 3-feet in cable length.

C. Please visit www.hitecrcd.com to download a HPP-22 PC Program.

Connect the plug to a product you want to upgrade a firmware or to adjust a set up.

For your HPP-22 update, click Help, then click Update to check if there is any update available.

4. Warnings

Warnings for HPP-22 connecting process:

* Do not connect more than one HPP-22 with a PC

* Do not connect Battery or Servo to HPP-22

* Do not connect more than one product

* Do not disconnect the cable with a PC and a product during programming or setup.

* Select the right product from the menu then connect a cable.

* Check if the cable is properly connected

* Cable length is recommended to be in 3-feet or shorter

Warnings for HPP-22 PC Program

* Do not run any other program during load and save process with Microsoft EXCEL ®

* Please run HPP-22 PC Program once. *Multiple attempts could freeze the program

* When error occurs, shut down the program and disconnect the cable first.

Then restart the process

* Please re-connect the cable when "HPP-22 Device Reconnecting" message pop-up

* HPP-22 PC Program is compatible with Windows ® XP and Windows VISTA™.