Intelligent Energy Management
Eco
Air Technical Specifications
The EcoAir thermostat display is part of the EcoWave controller package that includes the EcoSource controller.
The EcoAir communicates wirelessly or is hardwired to the EcoSource using low voltage wiring. It includes an on-board occupancy sensor and provides access to software tools and resources that constantly monitor and control energy savings.
The EcoAir remote display unit features a modern design with backlights in blue, green and orange. Thermostat enclosures are available in any Pantone color to match designer requirements. The large LCD displays setpoint, room temperature and outdoor temperature. Optional buttons can be software-customized, such as F°/C°,
Heat/Cool mode, Backlight, and Savings mode.
The Essentials
EcoAir
Part Number
Power
Required Hardware
SS6550
Two AA Batteries, 3.3 V DC
One or more EcoSource(s) to drive HVAC
Dimensions
Height
Width
Depth
Display
Display Size
Display Type
Customization
Case Color
Display Blacklight
Soft Buttons
4.0” (10.2 cm)
6.0” (15.2 cm)
1.5” (3.8 cm)
3” (7.62 cm)
Liquid Crystal Display (LCD)
Any Pantone ® color, including metallic finishes
Blue or Orange
Select from ºF/ºC, Heat, Cool, Heat/Cool, Backlight, or a
Green button to promote energy savings
Occupancy Detection
Type
Range
Infrared (IR)
Up to 30 feet (10 m) based on environment
Operational Temperature
Min
Max
35ºF (2ºC)
120ºF (49ºC)
Operational Humidity
Min
Max
10% Relative Humidity
90% Relative Humidity
See back for more specifications
Interconnectivity and Certifications
Internal Mesh Network Radio
Specification ZigBee ® IEEE 802.15.4
Radio Band
Radio Power
Radio Range
2.4 GHz ISM
1 mW (0dBm)
Up to 300 ft. (100 m) based on environment
I / O Connections
NTC Temperature Probe
Dry Contact Input
Firmware Upgrades
Manually
Over the Air
Membership
ZigBee
1 Input
2 Inputs
With ESU, using EcoSmart Data Cable and Laptop
Computer
With EcoCentral & an EcoCommander
Member of the ZigBee Alliance
Optional Components
Internal High Power Mesh Network Radio
Part Number SS6KC-RMHP
Specification ZigBee™ 802.15.4
Radio Band 2.4 GHz ISM
Radio Power 1 mW (0dBm)
Radio Range
Up to 300 ft. (100 m) based on environment
Internal High Power Mesh Network Radio w/
External Antenna Port
Part Number SS6KC-RMHP-E, SS6KC-FA
Specification ZigBee™ 802.15.4
Radio Band 2.4 GHz ISM
Radio Power 1 mW (0dBm)
Radio Range
Up to 300 ft. (100 m) based on environment
Internal Humidity Sensor
Part Number SS6KC-HS
Min
Max
Accuracy
10% Relative Humidity
90% Relative Humidity
± 2%
External NTC Temperature Probe
Part Number SS6KC-ET
Min -35ºF (2ºC)*
Max 370ºF (187.78ºC)*
*standard range; other range options are available
© Copyright 2014 Telkonet. All Rights Reserved.
Rev. 3
Telkonet, Inc.
20800 Swenson Drive
Suite 175
Waukesha, WI 53186