MEDION-Navigator 5 - FTP Directory Listing

MEDION-Navigator 5 - FTP Directory Listing
User's manual
MEDION-Navigator 5
The software described here is available for screens of landscape format and those of
upright format.
The pictures in this manual show the version for the upright format. The screens for the
landscape format are identical in terms of content. Both versions offer the same functions
and do not differ in terms of operation.
as on october 2005
Copyright
MEDION AG
Gänsemarkt 16-18
D-45127 Essen
Hotline: +44 (0)870-7 27 03 70
The information contained herein may be changed at any time without prior notification. This manual nor any
parts thereof may not be reproduced for any purpose whatsoever without the express written consent of
MEDION AG, nor transmitted in any form either electronically or mechanically, including photocopying and
recording.
© Copyright 2005, MEDION AG
All rights reserved.
User's manual MEDION-Navigator 5
Table of contents
1
2
3
4
5
User's manual
Introduction................................................................ 3
1.1
Search facilities and conventions........................................ 4
1.2
Liability .......................................................................... 4
1.3
Support .......................................................................... 5
1.4
Trademarks .................................................................... 9
Before you begin ....................................................... 11
2.1
Installing the software .................................................... 12
2.1.1 Inserting the memory card into the PocketPC .......... 12
2.1.2 Installing the navigation software .......................... 12
2.1.3 Restoring the files of the memory card ................... 13
2.2
Installing the hardware................................................... 13
2.2.1 Mounting and connecting the PocketPC................... 13
2.2.2 Initialising the GPS receiver .................................. 14
2.2.3 Installing and initialising the TMC receiver............... 15
2.3
The basic principle of navigation ...................................... 16
2.4
Important safety information ........................................... 17
2.4.1 Safety information on navigation ........................... 17
2.4.2 Safety information on the installation in the vehicle.. 17
Operating the navigation software............................ 19
3.1
Hardware keys .............................................................. 20
3.2
Software keyboard ......................................................... 20
3.2.1 Character keyboard ............................................. 20
3.2.2 Mobile phone keyboard ........................................ 22
3.3
Command buttons ......................................................... 23
3.3.1 Command buttons with caption ............................. 26
3.4
Lists............................................................................. 26
User modes ............................................................... 31
4.1
Two different user modes................................................ 32
4.2
Changing the user mode ................................................. 32
4.3
Standard mode.............................................................. 34
4.4
Extended mode ............................................................. 34
Navigation ................................................................ 35
5.1
General information on navigation.................................... 36
5.2
Starting MEDION-Navigator............................................. 37
5.2.1 Extended mode ................................................... 37
5.2.2 Standard mode ................................................... 39
5.3
Indicating a destination .................................................. 41
5.3.1 Entering an address............................................. 41
5.3.2 Selecting a point of interest .................................. 43
5.3.3 Selecting destinations from the contacts list ............ 50
5.3.4 Indicating destinations on the map ........................ 52
5.3.5 Favourites .......................................................... 55
5.3.6 Recent destinations ............................................. 57
5.3.7 Using your home address ..................................... 58
Table of contents Š i
User's manual MEDION-Navigator 5
6
7
8
5.4
Destination management ................................................ 59
5.4.1 Saving a destination ............................................ 59
5.4.2 Renaming a destination........................................ 60
5.4.3 Deleting a destination .......................................... 62
5.5
Indicating several destinations (Itinerary with stages)......... 62
5.5.1 Indicating route points ......................................... 63
5.5.2 Editing, saving and managing itineraries ................. 65
5.5.3 Calculating the route............................................ 71
5.5.4 Displaying the itinerary on the map ....................... 73
5.5.5 Simulating the route ............................................ 73
5.6
Starting navigation ........................................................ 75
Working with the map............................................... 79
6.1
Selecting a map............................................................. 80
6.2
Operating the map ......................................................... 82
6.3
Representation of the map in navigation mode................... 88
6.4
Displaying additional information on the map..................... 89
Useful functions for navigation ................................. 93
7.1
Adding a stage point during navigation ............................. 94
7.2
Next destination ............................................................ 95
7.3
Blocking a route section.................................................. 95
7.4
Using TMC functionality .................................................. 96
7.5
Keeping the logbook..................................................... 100
Configuring MEDION-Navigator .............................. 103
8.1
9
Settings .....................................................................
8.1.1 User mode .......................................................
8.1.2 Map information ................................................
8.1.3 Route information..............................................
8.1.4 Volume ............................................................
8.1.5 Representation..................................................
8.1.6 Automode ........................................................
8.1.7 Routing options.................................................
8.1.8 Logbook...........................................................
8.1.9 Key configuration ..............................................
8.1.10 Itinerary.........................................................
8.1.11 Format...........................................................
8.1.12 GPS ...............................................................
8.1.13 TMC...............................................................
8.1.14 Home address .................................................
8.1.15 Product information .........................................
104
105
105
106
107
107
108
109
110
110
110
111
111
112
112
112
Appendix................................................................. 113
9.1
Annex A: Problem solutions........................................... 114
9.1.1 Performance ..................................................... 114
9.1.2 GPS receiver..................................................... 114
10 Glossary .................................................................. 117
11 Index ...................................................................... 119
ii Š Table of contents
User's manual
User's manual MEDION-Navigator 5
1
Introduction
Topics covered in this chapter:
1.1 Search facilities and conventions
page 4
1.2 Liability
page 4
1.3 Support
page 5
1.4 Trademarks
page 9
Introduction
-3-
User's manual MEDION-Navigator 5
1.1
Search facilities and conventions
Find information
quickly
This manual offers the following search facilities:
Ù In the footnote at the bottom of the page, you may check
which chapter and which section you are actually reading.
Ù A glossary at the end of the manual contains explanations on
the technical terms used in this manual.
Ù An index at the end of the manual allows precise search for
the information contained in this manual.
Conventions
This manual uses different font styles and symbols to highlight
important paragraphs and to ease its use.
Font
Use
bold
Buttons, icons, names of entry fields, and
elements of the software’s user interface.
Also used for highlighting warnings and
notices.
bold italic
Registered names and trademarks.
SMALL CAPITALS
Window and dialogue box titles.
underlined italic
The name of the user mode which is
concerned by the current section. You need
not reed sections that don't concern the user
mode you are currently working with.
Symbol
Use
Indicates hints and notes that may ease the
use of MEDION-Navigator.
Indicates additional information.
Warns against dangers that might cause
damage to objects and persons.
1.2
Liability
Limitation of liability
The software and the manual are subject to change without
notice. MEDION AG may not be liable for the correctness of the
information contained in this manual nor for damages resulting
from the use of this manual.
To improve the quality of our products and our services, we
appreciate all suggestions for improvement and all error notices.
-4-
Search facilities and conventions
User's manual MEDION-Navigator 5
1.3
Support
Support Great Britain
Medion Electronics Ltd.
120 Faraday Park
Faraday Road
Dorcan
Swindon SN3 5JF
Wilts
Call our support staff for Telephone support:
Ù Mondays to Fridays 8am to 8pm
Ù Saturdays, Sundays 10am to 4pm
+44 (0)870-7 27 03 70
Or call our Fax support:
+44 (0)1793-71 57 16
Or send us an email:
hotline@medion.co.uk
Support Austria
MEDION Service Center
Franz-Fritsch-Straße 11
A-4600 Wels
Call our support staff for Telephone support:
Ù Mondays to Fridays from 8am to 9pm
Ù Saturdays, Sundays, and holidays from 10am to 6pm
+43 (0) 810-00 10 48
Or call our Fax support:
+43 (0)7242-93 96 75 92
Or send us an email:
Service-Austria@medion.at
Support Belgium
Medion Service Center
GSC
Bijlokestraat 15 - 19
B-9070 Destelbergen
Call our support staff for Telephone support
Ù Mondays to Fridays from 8.30am to 6pm
Ù Saturdays from 9am to 1pm
070707992
homepage:
www.gsc.be
Introduction
-5-
User's manual MEDION-Navigator 5
Support Denmark
Medion Service Center
Meterbuen 6 - 12, Bygning 8
2740 Skovlunde
Call our support staff for Telephone support
Ù Mondays to sundays from 8.30am to 10pm
70 20 42 33
Or call our Fax support:
44 84 00 41
Or send us an email:
hotline@compare-support.dk
Support Finland
Medion Service Center
InfoCare Finland Oy AB
Sorvaajankatu 15, 2 krs
Fin-00880 Helsinki
Call our support staff for Telephone support:
Ù Mondays to sundays from 8.30am to 10pm
09 8565 9200
Or call our Fax support:
09 8565 9201
Or send us an email:
finland@compare-support.dk
Support France
Medion France
ZAC de La Bertraie
Route de Sablé
72270 Villaines Sous Malicorne
Call our support staff for Telephone support
Ù Mondays to Fridays from 9am to 7pm
Indigo no. 0825 81 1000
Or send us an email:
hotline@medion.fr
homepage:
www.medion.fr
-6-
Support
User's manual MEDION-Navigator 5
Support Germany
MTC - Medion Technologie Center
Freiherr-vom-Stein-Straße 131
D-45473 Mülheim / Ruhr
Call our support staff for Telephone support:
Ù Mondays to Fridays from 7am to 11pm
Ù Saturdays, Sundays, and holidays from 10am to 6pm
+49 (0)1805-63 34 66
(dtms-Service, 0,12 €/min)
Or call our Fax support:
+49 (0)1805-65 46 54
(dtms-Service, 0,12 €/min)
Or send us an email:
pc-support@medion.com
Support Ireland
Medion Electronics Ltd.
120 Faraday Park
Faraday Road
Dorcan
Swindon SN3 5JF
Wilts
Call our support staff for Telephone support:
Ù Mondays to Fridays 8am to 8pm
Ù Saturdays, Sundays 10am to 4pm
1 800 992508
Or call our Fax support:
+44 (0)1793-71 57 16
Or send us an email:
hotline@medion.co.uk
Support Italy
Medion Service Center
Zona Industriale Pianodardine
I-83100 Avellino
Call our support staff for Telephone support:
Ù Mondays to Fridays 8am to 6pm
Ù Saturdays 9am to 1pm
199 101 295
Or send us an email:
medionservicecenter@it.flextronics.com
Introduction
-7-
User's manual MEDION-Navigator 5
Support Netherlands
Medion Service Center
Postbus 7140
5980 AC Panningen
Netherlands
Call our support staff for Telephone support
Ù Mondays to Fridays from 7am to 11pm
Ù Saturdays, Sundays from 10am to 6pm
0900 - 633 4660
Or call our Fax support:
0900 - 654 6540
Or send us an email:
PC-infoNL@medion.com
Support Norway
Medion Service Center
Compare Support A/S
Olaf Helsetsvei 1
N-0694 Oslo
Call our support staff for Telephone support:
Ù Mondays to sundays from 8.30am to 10pm
21 50 27 20
Or call our Fax support:
21 50 27 21
Or send us an email:
norway@compare-support.dk
Support Portugal
Medion Service Center
Luma
Rua Alfredo Guisado no. 4
1500-030 Lisboa
Portugal
Call our support staff for Telephone support:
Ù Mondays to Fridays from 8am to 10pm
8 08 20 18 34
Or call our Fax support:
2 17 78 60 87
-8-
Support
User's manual MEDION-Navigator 5
Support Spain
Medion Service Center
Visonic S.A.
Alejandro Sanchez 95-97
28019 Madrid
Call our support staff for Telephone support
Mondays to Fridays from 8am to 2pm and from 3.30pm to 7pm
902196437
Or call our Fax support:
914604772
Or send us an email:
hotline@visonic.es
Support Sweden
MEDION Service Center
Compare Support AB
Box 1843
Gottorpsgatan 11
S-581 17 Linköping
Ù Call our support staff for Telephone support:
Ù Mondays to sundays from 8.30am to 10pm
031 799 99 97
Or call our Fax support:
031 799 99 98
Or send us an email:
sweden@compare-support.dk
Support Switzerland
MEDION Service
Lerzenstrasse 10
8953 Dietikon
Switzerland
Call our support staff for Telephone support:
Ù available 24/7
0848 - 33 33 32
1.4
Trademarks
Registered
trademarks
All brands and trademarks mentioned in this document are
possibly registered by third party and subject to the current
legislation and to the rights of their respective owners without
reservation. All mentioned names of products, societies, or
brands may be registered trademarks of their respective owners.
Every right that is not explicitly accorded is reserved.
The absence of an explicit labelling of registered trademarks does
not allow the conclusion that this brand was not subject to the
rights of third party.
Ù Outlook, Windows and ActiveSync are registered trademarks
of the Microsoft Corporation.
Introduction
-9-
User's manual MEDION-Navigator 5
2
Before you begin
Topics covered in this chapter:
2.1 Installing the software
page 12
Inserting the memory card into the PocketPC
Installing the navigation software
Restoring the files of the memory card
2.2 Installing the hardware
page 13
Mounting and connecting the PocketPC
Initialising the GPS receiver
Installing and initialising the TMC receiver
2.3 The basic principle of navigation
page 16
2.4 Important safety information
page 17
Safety information on navigation
Safety information on the installation in the vehicle
Before you begin
- 11 -
User's manual MEDION-Navigator 5
2.1
2.1.1
Installing the software
Inserting the memory card into the PocketPC
So setzen Sie die
Speicherkarte ein…
To be able to use MEDION Navigator you must first insert the
provided memory card with card data into the PocketPC.
1. Unpack the memory card carefully. Pay attention not to touch
contacts and not to make them dirty.
2. Hold the memory card as shown below (label up, cut corner
bottom left). Now insert the memory card into the card slot
on the top of the PocketPC. It should snap in.
Note: the memory card must always remain in the PocketPC
whilst the navigation system is in use.
2.1.2
Installing the navigation software
Install the navigation
software…
Installation starts automatically as soon as you’ve inserted the
memory card. Simply follow the instructions on the screen.
If the installation does not start automatically, please carry out
the following steps:
1. Turn your PocketPC on.
2. Tap Start > Programs > File Explorer.
3. Tap My Documents and select My device.
4. Tap the Storage Card folder.
5. Tap the MEDION-Navigator.cab file.
The installation procedure begins.
6. Follow the instructions on the screen.
Note: Depending on the battery charging state, it may happen
that you have to charge the PocketPC for a while before
installation may be executed.
- 12 -
Installing the software
User's manual MEDION-Navigator 5
2.1.3
Restoring the files of the memory card
Survey
In case you have lost or damaged the provided memory card,
you will find all files, which are necessary for restore on your
MEDION-Navigator CD 1.
You will need a PC for restoring the files. You may transmit the
files via an ActiveSync connection or via a card reader.
Note: ActiveSync must be installed on your PC. For detailed
information, please refer to the manual of your PocketPC.
Restore the files of
the memory card…
1. Insert the MEDION-Navigator-CD-ROM 1 into your CD-ROM
drive.
2. Open your language folder, e.g. English on the CD-ROM 1.
3. Open the Installation subfolder of the language folder and
copy all of its files to a memory card.
4. Insert the map-CD into your CD drive, which contains the
map you want to use for navigation.
5. Copy the required map to the memory card.
6. Proceed as described in "Installing the software", page 12.
Note: In case you want to use another language version of
MEDION-Navigator, select the respective language folder in
step 2.
In case you just want to use another map on your navigation
device, execute only steps 4 and 5. Make sure that the available
storage capacity on your memory card is sufficient for the
selected map.
2.2
Installing the hardware
Survey
2.2.1
Mount the holder of the PocketPC before you use the navigation
system. You will also have to initialise, if purchased, the TMC
receiver.
Mounting and connecting the PocketPC
Caution: The mounted holder must not impede the driver’s
attention on the traffic. In case this is not possible, use the
provided adhesion plate to mount the holder somewhere else so
that safe driving is granted.
Mounting the
holder...
Before you begin
1. Remove the lamination sheet from the adhesion plate.
2. Stick the adhesion plate at a convenient place on the
dashboard. Make sure that the surface of the dashboard is
clean and dry and press the plate forcefully on its place.
- 13 -
User's manual MEDION-Navigator 5
Note: Do not charge the plate for the first 24 hours in order
to grant its hold.
Connecting the
PocketPC...
3. Attach the cradle of the PocketPC to the swan-neck mount.
Note: Take note of the caption on the swan-neck mount. The
arrow with the caption close must show in snap-on direction.
The connection must snap on audibly.
4. Place the suction cup on the adhesion plate (or directly on the
windscreen) and press the lever on the suction cup down. The
suction cup adheres to the plate (or to the windscreen).
5. Put the PocketPC into the cradle. Make sure that it is held
safely!
6. Plug the adapter into the socket at the bottom of the
PocketPC.
2.2.2
Initialising the GPS receiver
Initialisation of the
GPS receiver
The initialisation process of the GPS receiver starts automatically.
Within 15 seconds, the GPS-icon on your PocketPC switches from
No GPS to No signal.
As soon as the signals of more than 3 satellites are being
received, the GPS-icon switches to GPS ready.
No GPS
No signal
GPS ready
This procedure may take about 20 minutes. When the GPS icon
becomes GPS ready earlier, it would be good to leave the GPS
receiver turned on for about 15 more minutes in order to grant
its correct operation.
The initialisation process is finished when the reception of more
than 3 satellites is assured after about 20 seconds.
- 14 -
Installing the hardware
User's manual MEDION-Navigator 5
Note: This initialisation process must be carried out only once.
The other times, the GPS receiver will be ready within about one
minute.
Note: When the PocketPC is connected to the power supply for
the first time, leave it connected for about 2 hours in order to
charge its battery.
Note: A new initialisation may become necessary when the GPS
receiver has not been in use. In this case, the initialisation
process would take about 10 minutes.
Caution: Disconnect the PocketPC from the power supply when
you are leaving the car parked for a longer period. Failure to do
so might result in a flat battery as the receiver consumes
electricity permanently.
For details on the operation of your GPS receiver, please refer to
"Command buttons", page 23.
2.2.3
Installing and initialising the TMC receiver
Survey
If you have purchased MEDION-Navigator bundled with a TMCreceiver or if you own an external TMC-receiver, you will have to
connect it to your PDA and to initialize it.
Connecting the TMCreceiver
For information on how to connect the TMC-receiver, please refer
to the manuals of your TMC-receiver and of your PocketPC.
Initialisation of the
TMC module
The initialisation process of the TMC receiver starts automatically.
Within a few seconds, the TMC-icon on your PocketPC switches
from Searching for broadcast station to TMC ready.
Searching for broadcast station
TMC ready
For details on the operation of the TMC receiver, please refer to
"Using TMC functionality", page 96.
Before you begin
- 15 -
User's manual MEDION-Navigator 5
2.3
The basic principle of navigation
MEDION-Navigator
The time of complicated and frustrating inquiries on the right way
in folded maps is over. From now on MEDION-Navigator, your
navigation system, will guide you, based on satellite information,
quickly and safely to your destination.
GPS-based
navigation
The Global Positioning System (GPS) has originally been
developed in the 70ies, as a weapon guidance system for the
American forces.
The GPS is based on 24 satellites, which are in orbit round the
earth and which are permanently emitting signals. The GPS
receiver receives these signals and calculates, based on the
runtime of the signals, his distance from the respective satellites.
This information serves for calculation your current geographic
position.
The signals of at least three satellites are needed to determine
the longitude and the latitude. With the signals of at least four
satellites the elevation may be calculated, too. The determination
has an accuracy of about 3 yards.
Navigation with GPS
The delivered maps contain the geographic coordinates of the
points of interest, streets and towns they represent. Thus the
navigation system can calculate a route from a given start point
to a given destination point.
In case your navigation system receives the signals of at least
three satellites it may determine your current position and
represent it on the map. This position may then serve as start
point for navigation purposes.
As the determination and representation of your position is
carried out once a second, you may watch your movements on
the map.
Traffic information
with TMC)
The Traffic Message Channel (TMC) provides the navigation
system with the latest traffic information. A TMC receiver, which
is available as accessory, receives these signals broadcasted by
radio stations.
TMC Operating mode
The Traffic Message Channel (TMC) is based on a news
system. Traffic information is recorded continually this is done
automatically by sensors on the motorways and by the police.
This information is then forwarded to the radio stations without
delay. It is digitally coded, differentiated according to routes and
driving directions and transmitted inaudibly.
The TMC-receiver extracts the TMC data from the RDS signal and
provides the navigation software with them. Current traffic
obstructions may then be displayed.
The reported obstructions may be considered for route
calculation. In case of obstructions on the computed itinerary,
they may be used for computing an alternative route, which
evades the obstruction.
MEDION-Navigator features dynamic navigation, which is well
adapted to the current traffic situation.
- 16 -
The basic principle of navigation
User's manual MEDION-Navigator 5
2.4
Important safety information
Note
In your own interest, read the following notices and safety
information carefully before starting up your navigation system.
2.4.1 Safety information on navigation
Use of MEDION-Navigator is executed at your own risk.
Caution: To protect yourself and others from accidents please do
not operate the navigation system while driving!
Caution: You must not look at the display except when it is
absolutely safe to do so!
Caution: The road layout and the traffic signs are absolutely
prior to the instructions of the navigation system.
Caution: You must not follow the instructions of MEDIONNavigator except when the circumstances and the road traffic
regulations allow doing so. MEDION-Navigator will guide you to
your destination even when you have left your planned itinerary.
Note: We recommend effecting route planning before beginning
the journey. If you are on the road and you want to establish a
new itinerary, please drive to the next parking site!
Note: If you have not understood the instructions or if you are
not sure about what to do next you may quickly refer to the map
or arrow view of your navigation system.
2.4.2
Safety information on the installation in the vehicle
Caution: Do not fix the holder within the deployment zone of
airbags.
Caution: When you install the holder, please check that it may
not constitute any safety risk, even in case of an accident.
Before you begin
- 17 -
User's manual MEDION-Navigator 5
3
Operating the navigation
software
Topics covered in this chapter:
3.1 Hardware keys
page 20
3.2 Software keyboard
page 20
Character keyboard
Mobile phone keyboard
3.3 Command buttons
page 23
Command buttons with caption
3.4 Lists
Operating the navigation software
page 26
- 19 -
User's manual MEDION-Navigator 5
3.1
Hardware keys
Key configuration
In MEDION-Navigator, you may configure the hardware keys of
your PocketPC to execute the "Up", "Down", "Left", "Right", "OK"
and "Return" actions. This enables convenient and easy
operation.
When you quit the navigation software, the keys will have their
standard functionality.
1. On the main screen, tap Settings.
The SETTINGS screen opens.
2. Via the arrow buttons, select the KEYS screen.
3. Tap Configure.
4. Select the keys for the respective actions.
5. Tap the Save button.
3.2
Survey
Software keyboard
A software keyboard appears at the bottom of the screen when
text entries are necessary. Choose between a character keyboard
or a mobile phone keyboard.
Select a software keyboard by tapping the respective icon at the
bottom of the screen. The icon of the active keyboard appears
pressed.
3.2.1
- 20 -
Character keyboard
Hardware keys
User's manual MEDION-Navigator 5
You may carry out all entries with your finger on the character
keyboard. But you may enter capital letters only.
You need not enter small letters or special characters when
entering a destination's town or street name. MEDIONNavigator replaces these characters automatically. When you
are looking for, e.g., a French town called "Héroïnès", simply type
"HEROINES".
Entering a space,
deleting a
character…
Switching between
character and
number entry…
Tap the
icon to enter a space character.
Tap the
cursor.
icon to delete the character at the left of the
Tap the
icon to enter numbers, e.g. for a postcode.
Tap the
Special characters
Tap the
icon to return to the character entry mode.
icon to enter a special character.
The special characters keyboard appears.
As soon as you have entered a special character the letter
keyboard reappears.
You need not enter special characters when entering a
destination's town or street name but they may be helpful for
entering names for saved destinations and itineraries.
Moving the cursor
If you want to delete another character than the one to the left of
the cursor position, or if you want to insert a character at another
place than at the end of the text, you have to move the cursor to
the respective place.
Just tap the place where you want to have the cursor.
Operating the navigation software
- 21 -
User's manual MEDION-Navigator 5
3.2.2
Mobile phone keyboard
You may carry out all entries with your finger on the mobile
phone keyboard. But you may enter capital letters only.
As on a mobile phone, each key is designed to enter several
letters with it. The position of a letter on a key caption indicates
how often you must tap this key to enter the respective letter.
E.g., to enter an "S", tap the "PQRS" key four times.
You need not enter small letters or special characters when
entering a destination's town or street name. MEDIONNavigator replaces these characters automatically. When you
are looking for, e.g., a French town called "Héroïnès", simply type
"HEROINES".
Entering a space,
deleting a
character…
Switching between
character and
number entry…
- 22 -
Tap the
icon to enter a space character.
Tap the
cursor.
icon to delete the character at the left of the
Tap the
icon to enter numbers, e.g. for a postcode.
Tap the
icon to return to the character entry mode.
Software keyboard
User's manual MEDION-Navigator 5
Special characters
When you tap a key, a line above the software keyboard appears
which lists all characters that may be entered by this key. The
active character is highlighted.
If, e.g., you want to type "Ø", tap the "MNO" key repeatedly until
"Ø" is highlighted in the line above the software keyboard.
You need not enter special characters when entering a
destination's town or street name but they may be helpful for
entering names for saved destinations and itineraries.
Moving the cursor
If you want to delete another character than the one to the left of
the cursor position, or if you want to insert a character at another
place than at the end of the text, you have to move the cursor to
the respective place.
Just tap the place where you want to have the cursor.
3.3
Icons
Command buttons
The following buttons appear at the bottom of every MEDIONNavigator screen:
Return
Tap this icon to return to the previous screen. This icon is not
available on the MAIN SCREEN.
Main screen
Tap this icon to open the main screen. This icon is not available
on the MAIN SCREEN.
Operating the navigation software
- 23 -
User's manual MEDION-Navigator 5
GPS
The GPS symbol is placed at the bottom of the screen. The
different GPS-icons have the following significance:
Symbol
No GPS
No signal
GPS ready
Significance
A GPS receiver is not connected or the
power supply is interrupted.
A GPS receiver is connected, but the
received signals are not convenient for
navigation purposes (e.g. because you
are in a closed building).
The signals are convenient. Navigation
may begin.
Tap the GPS icon to display the current GPS status:
- 24 -
Entry
Significance
GMT
Greenwich Mean Time
Time of London ignoring daylight saving
time.
Longitude /
Latitude
Current position:
Indication of east longitude and north
latitude.
Satellites
Number of received satellites. At least three
satellites must be received for navigation
purposes.
Command buttons
User's manual MEDION-Navigator 5
Entry
Significance
HDOP
Horizontal Dilution of Precision:
Indicates the quality of position
determination. Theoretically any value from 0
to 50 may occur. The smaller the value, the
more accurate is the position determination
(value 0 = no deviation from the real
position). Values up to 8 are convenient for
navigation purposes.
Speed
Indicates your current speed.
Position
Indicates the address of your current
position.
Save
Tap this button to add the current address to
the FAVOURITES.
Quit
Tap this button to quit the GPS screen.
Logbook
Tap this icon to access the logbook functions.
For details on the TMC functionality, please refer to "Keeping the
logbook", page 100.
TMC
The TMC symbol is placed at the bottom of the screen. The
different TMC-icons have the following significance:
Symbol
Significance
No Symbol
No TMC receiver connected
-ORThe TMC receiver is not connected
correctly.
Searching for
broadcast station
The TMC-receiver is ready but cannot
receive TMC signals. This is the case
when, e.g., you are in an area where
TMC is not available.
TMC signals are being received.
TMC ready
TMC
Tap this icon to display TMC information.
For details on the TMC functionality, please refer to "Using TMC
functionality", page 96.
Operating the navigation software
- 25 -
User's manual MEDION-Navigator 5
3.3.1
Command buttons with caption
Command buttons
You will find command buttons with captions on almost every
screen of MEDION-Navigator. There is three groups of
command buttons:
1. Command buttons with a defined functionality.
These buttons are designed to execute a functionality, which
is indicated by their caption. They are normally buttons like
Save, OK, Cancel, Select map, One destination etc.
2. Buttons to select one of two possibilities.
These buttons are designed to select one of two possibilities.
Normally, the current state is indicated by the caption of the
button. They are normally buttons like User mode, Yes-No,
On-Off.
When you tap one of these buttons, the caption switches to
the other possibility. This change must be confirmed by
clicking another button (normally OK or Save) before the
current screen closes.
3. Buttons to enter data.
Subsequently, these buttons will be referred to as entry
fields. The caption either your last entry or <please select>.
They are buttons like Town, Street, Category (of a POI)
etc.
When you tap an entry field, another screen with a software
keyboard, a list, or with both of them opens where you can
make your entries. This entry must be confirmed by clicking
another button (normally OK or Save) before the entry
screen closes. Your entry becomes then the caption of the
entry field.
For information on the use of the keyboard, please refer to
„Software keyboard", page 20.
For information on working with lists, please refer to "Lists",
page 26.
3.4
Lists
Survey
There are many cases where you have to select an entry from a
list.
If, for example, you have not completely entered the name of a
town before tapping OK, a list appears which contains all towns
beginning with your entry or having it into their names. The
postcode of the towns is also indicated in order to allow you to
choose the correct one if there is more than one town with the
same name.
Entry with focus
- 26 -
One of the entries has the focus. This entry is written in bold.
Moreover, there is often some additional information on that
entry in a 2nd or 3rd line. In a list of towns, there is indicated the
county the respective town belongs to.
Lists
User's manual MEDION-Navigator 5
Icons
At the right hand side of lists, there are three icons:
OK: Tap this icon to confirm the selection of the entry with the
focus (which is placed directly at the left of the OK icon).
Up: Tap this icon to scroll the list one item up.
Down: Tap this icon to scroll the list one item down.
Example
Search for BICKNOR.
1. In the MAIN MENU tap One destination.
The DESTINATION screen opens.
2. Tap Address.
The ADDRESS screen opens.
3. Tap the Town entry field.
The software keyboard appears.
Operating the navigation software
- 27 -
User's manual MEDION-Navigator 5
4. Enter the letters BICK.
All towns beginning with BICK or having BICK in their names
are listed.
When the list is very long, you may enter one more letter in
order to shorten the list.
5. Enter N.
All towns beginning with BICKN or having BICKN in their
names are listed.
- 28 -
Lists
User's manual MEDION-Navigator 5
6. Tap the Down icon repeatedly until BICKNOR appears directly
under the white entry field.
The entry BICKNOR has the focus.
7. Tap
.
The ADDRESS screen reappears. BICKNOR is entered into the
Town field.
Operating the navigation software
- 29 -
User's manual MEDION-Navigator 5
4
User modes
Topics covered in this chapter:
4.1 Two different user modes
page 32
4.2 Changing the user mode
page 32
4.3 Standard mode
page 34
4.4 Extended mode
page 34
User modes
- 31 -
User's manual MEDION-Navigator 5
4.1
Survey
Two different user modes
MEDION-Navigator can be operated in two different user
modes: Standard and Extended. This grants an optimum of
usability for each user: Less experienced users and users who do
not need using the complete functionality of the software work in
standard mode. Experienced users who are ready to spend some
time in getting used to operate the complete functionality word in
extended mode.
Some configuration settings have an effect on the work in
standard mode but can only be changed in extended mode. For
further information, please refer to "Configuring MEDIONNavigator", page 103.
4.2
Changing the user mode
You may at any time switch to the other user mode.
1. In the MAIN MENU, tap Settings.
The SETTINGS screen appears:
The User mode entry is at the top of the list. If it is not
selected, tap the Up icon repeatedly until User mode is
selected.
2. Tap
- 32 -
.
Two different user modes
User's manual MEDION-Navigator 5
The USER MODE screen appears:
Your current user mode is indicated on the Current user
mode field.
3. Tap Current user mode to switch to the other user mode.
The name of the user mode you want to switch to becomes
the caption of the entry field.
4. Tap Save to save the changes.
Note: When you switch to standard mode, a dialog window
asks you whether you want to keep the configuration changes
you have made in extended mode. This dialog window
appears even when you have not made any configuration
changes. Tap Yes if you want to keep these changes.
The USER MODE screen closes and you are in the Main menu of
the user mode you have just switched to.
User modes
- 33 -
User's manual MEDION-Navigator 5
4.3
Standard mode
Survey
In standard mode, the software is easier to operate. As it offers
reduced functionality, functions may be accessed quicker. So, if
you do not need functions like Route planning or indicating a
destination on the map, we recommend working in standard
mode.
Functionality
In standard mode, you can:
Ù Select another map
Ù Enter a destination to navigate to (Address, POI)
Ù Navigate home
Ù Select a saved destination
Ù Save destinations
Ù Select a destination from the recent destinations list
Ù Change some configuration settings
4.4
Extended mode
Survey
In extended mode, you dispose of the complete functionality of
MEDION-Navigator. You may for example indicate and navigate
to more than one destination (route planning with stages). You
may change all configuration settings. If you want to use the
complete functionality, work in extended mode.
Functionality
In addition to the functions of the standard mode, the extended
mode enables you to:
Ù Indicate a direction directly on the map
Ù Plan and save routes with several stages
Ù Adjust the route options before each navigation
Ù Change all configuration settings
- 34 -
Standard mode
User's manual MEDION-Navigator 5
5
Navigation
Topics covered in this chapter:
5.1 General information on navigation
page 36
5.2 Starting MEDION-Navigator
page 37
Extended mode
Standard mode
5.3 Indicating a destination
page 41
Entering an address
Selecting a point of interest
Selecting destinations from the contacts list
Indicating destinations on the map
Favourites
Recent destinations
Using your home address
5.4 Destination management
page 59
Saving a destination
Renaming a destination
Deleting a destination
5.5 Indicating several destinations (Itinerary with stages)
page 62
Indicating route points
Editing, saving and managing itineraries
Calculating the route
Displaying the itinerary on the map
Simulating the route
5.6 Starting navigation
Navigation
page 75
- 35 -
User's manual MEDION-Navigator 5
5.1
General information on navigation
Use of MEDION-Navigator is executed at your our risk.
Caution: To protect yourself and others from accidents, do not
program the navigation system while driving. Enter or select your
destination and activate the navigation system before you begin
to drive!
Caution: Do not look at the display unless it is absolutely safe to
do so! Safe driving is the first priority!
Caution: The rules of the road and traffic signs must be obeyed
prior to following instructions from the navigation system.
Caution: Do not follow the instructions of MEDION-Navigator
unless circumstances and the road traffic regulations allow doing
so. MEDION-Navigator will guide you to your destination even
when you have gone off course from your route.
Obstructed GPS
reception
When you turn off the GPS receiver or when the reception of
GPS-signals is obstructed MEDION-Navigator does not close
but navigation is interrupted.
As soon as the GPS receiver works again the navigation system
notices a possible change of your current position and
recalculates the route. You may simply continue navigation.
Quitting navigation
mode
When you quit navigation mode by command the MAIN MENU
appears. You may then indicate another destination or reassume
the by selecting the former destination from the Recent
destinations list.
Arriving at your
destination
When you have reached your destination the system pronounces
the message "You have reached your destination!"
The map is no more presented in navigation mode. A small green
arrow indicates your current position.
- 36 -
General information on navigation
User's manual MEDION-Navigator 5
5.2
Starting MEDION-Navigator
Starting the
navigation software…
1. Turn your PDA on.
2. Tap the MEDION-Navigator icon on the desktop.
At the first start (and each time you had terminated
MEDION-Navigator via the Quit icon), the following
message appears:
3. Tap the
button. If you do not accept and if you tap the
button, the software terminates.
5.2.1
Extended mode
The MAIN SCREEN appears:
Main screen
All functions of the program are accessible via the Main screen.
Note: When you turn your PDA on it shows the screen which was
displayed when it was turned off. Nevertheless, you may access
the Main screen from all other screens by tapping
.
Navigation
- 37 -
User's manual MEDION-Navigator 5
One destination
Tap the Navigation button to indicate a destination for
navigation (one stage).
For details, please refer to "Indicating a destination", page 39.
Navigation
homewards
Tap the Home icon to navigate to your home address.
For details, please refer to "Using your home address", page 58.
Help
Tap the Help icon to open the online help.
Route planning
Tap the Route planning button for itinerary planning purposes.
For details, please refer to "Indicating several destinations
(Itinerary with stages)", page 62.
Display the map
Tap the Show map button to display the map which is currently
in use..
Select map
Tap the Map button to select another map from the memory card
which is currently inserted.
For details, please refer to "Working with the map", page 79.
Settings
Tap the Settings button to modify the settings of MEDIONNavigator.
For details, please refer to "Settings", page 104.
- 38 -
Starting MEDION-Navigator
User's manual MEDION-Navigator 5
Quit
5.2.2
Tap the Quit button to quit MEDION-Navigator.
Standard mode
The MAIN SCREEN appears:
Main screen
Note: When you turn your PDA on it shows the screen which was
displayed when it was turned off. Nevertheless, you may access
the Main screen from all other screens by tapping
.
One destination
Tap the Navigation button to indicate a destination for
navigation (one stage).
For details, please refer to "Indicating a destination", page 41.
Navigation
homewards
Tap the Home icon to navigate to your home address.
For details, please refer to "Using your home address", page 58.
Navigation
- 39 -
User's manual MEDION-Navigator 5
Help
Tap the Help icon to open the online help.
Favourites
Tap the Favourites button to navigate to a favourite.
For details, please refer to "Favourites", page 55.
Recent destinations
Tap the Recent destinations button to select a destination
entered previously.
For details, please refer to "Recent destinations", page 57.
Select map
Tap the Map button to select another map from the memory card
which is currently inserted.
For details, please refer to "Working with the map", page 79.
Settings
Tap the Settings button to modify the settings of MEDIONNavigator.
For details, please refer to "Settings", page 104.
Quit
- 40 -
Tap the Quit button to quit MEDION-Navigator.
Starting MEDION-Navigator
User's manual MEDION-Navigator 5
5.3
Indicating a destination
Basic principle of
navigation
In this chapter you will learn about the possibilities for indicating
and managing destinations in MEDION-Navigator.
For details on how to start navigation to a destination, please
refer to "Starting navigation", page 75.
Indicating a
destination
In MEDION-Navigator there are several possibilities to enter or
to select destinations:
Ù Entering an address, see page 41
Ù Selecting a point of interest, see page 43
Ù Selecting destinations from the contacts list, see page 50
Ù Indicating destinations on the map, see page 52
Ù Favourites, see page 55
Ù Recent destinations, see page 57
Ù Using your home address, see page 58
5.3.1
Entering an address
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Address.
Navigation
- 41 -
User's manual MEDION-Navigator 5
Standard mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Address.
Indicating an
address…
The ADDRESS screen opens.
2. Enter the destination town into the Town or Postcode entry
field. Enter either its name or its postcode.
For information on working with lists, please refer to "Lists",
page 26.
- 42 -
Indicating a destination
User's manual MEDION-Navigator 5
3. Enter the destination street into the Street entry field.
4. Enter the house number of your destination into the Nr. field,
if you know it.
Note: If the house numbers of the respective street are
stored in the database of places, you may tap the field
besides the Street field.
If no house numbers are stored, the respective field is
deactivated. The software navigates to the respective street
5. Enter the name of a crossroad into the Intersection entry
field if you want to define an intersection as destination point
(e.g. because the house number is not available)..
For information on saving destinations, please refer to
"Saving a destination", page 59.
5.3.2
Selecting a point of interest
Points of interest
Points of Interest, also referred to as POIs, are stored in the
database of places and may be displayed on the map. Ports,
airports, restaurants, hotels, petrol stations, public buildings, and
others belong to the special destinations.
Indicate a point of interest by selecting one
Point of interest nearby
Note: You may only select Points of interest nearby when the
GPS receiver is turned on and when the GPS signal strength is
sufficient.
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Navigation
- 43 -
User's manual MEDION-Navigator 5
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Point of interest.
The POINT OF INTEREST screen opens:
1c On the POINT OF INTEREST screen, tap …nearby.
Standard mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
- 44 -
Indicating a destination
User's manual MEDION-Navigator 5
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap …nearby.
Selecting a Point of
interest nearby…
The POI NEARBY screen opens:
2. Enter the radius around your current position within which
you want to search for points of interest into the Radius
entry field.
3. Select the main category of points of interest to search for
from the left one of the two Category list fields, e.g.
"Garage". Only points of interest situated within the indicated
radius will be displayed.
4. Select the Subcategory of points of interest to search for
from the right one of the two Category list fields, e.g. "Audi
VW Seat Skoda".
For information on working with lists, please refer to "Lists",
page 26.
Note: If you leave the Subcategory field empty, all points of
interest matching with the selected main category will be
listed in the Point of interest list field.
5. Select the correct destination from the Point of interest list
field.
Note: You need not make entries into the Category and
Subcategory fields. Their purpose is only to shorten the
Point of interest list. This list may become very extensive,
especially in big towns.
For information on saving destinations, please refer to
"Saving a destination", page 59.
Navigation
- 45 -
User's manual MEDION-Navigator 5
Point of interest in a certain town
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Point of interest.
The POINT OF INTEREST screen opens:
1c On the POINT OF INTEREST screen, tap …in a town.
- 46 -
Indicating a destination
User's manual MEDION-Navigator 5
Standard mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap …in a town.
Selecting a Point of
interest in a certain
town…
The POI in a town screen opens:
2. Enter the name of the town in which you want to search for
points of interest into the Town or postcode field.
3. Select the main category of points of interest to search for
from the Category list field (e.g. Nightlife). Only categories
Navigation
- 47 -
User's manual MEDION-Navigator 5
matching your Town entry are listed.
4. Select the Subcategory of points of interest to search for
from the right one of the two Category list fields (e.g.
Cinema).
5. Select the correct destination from the Point of interest list
field.
For information on working with lists, please refer to "Lists",
page 26.
Note: You need not make entries into the Category and
Subcategory fields. Their purpose is only to shorten the
Point of interest list. This list may become very extensive,
especially in big towns.
For information on saving destinations, please refer to
"Saving a destination", page 59.
Point of interest of supraregional significance
This function is only available in "Extended mode".
For information on how to change the user mode, please refer
to "Changing the user mode", page 32.
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Point of interest.
- 48 -
Indicating a destination
User's manual MEDION-Navigator 5
The POINT OF INTEREST screen opens:
1c On the POINT OF INTEREST screen, tap …nationwide.
Selecting a Point of
interest of
supraregional
significance…
The POI NATIONWIDE screen opens:
2. Select the main category of points of interest to search for
from the Category list field (e.g. Airports).
3. Select the correct destination from the Point of interest list
field.
For information on working with lists, please refer to "Lists",
page 26.
Navigation
- 49 -
User's manual MEDION-Navigator 5
Note: You need not make entries into the Category field.
Their purpose is only to shorten the Point of interest list.
This list may become very extensive, especially in big towns.
For information on saving destinations, please refer to
"Saving a destination", page 59.
5.3.3
Selecting destinations from the contacts list
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Using a contact's
address as
destination…
Any address from the contacts list on your PocketPC may be used
as destination for navigation or itinerary planning purposes.
In order to identify an address clearly and without ambiguity,
town, postcode, street, and house number should be indicated.
Note: Only contacts the address of which is covered by the
currently loaded map may be used for navigation or itinerary
planning purposes.
Incomplete address
If an address cannot be identified without ambiguity e.g. because
there are two towns with the same name on the map, MEDIONNavigator lists them all, indicating their postcodes and districts.
Select the respective town and tap OK.
If the town has been found but the street of the contact is not
indicated, you will be guided to the centre of this town.
To avoid problems, the addresses from your contacts list should
be complete.
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
- 50 -
Indicating a destination
User's manual MEDION-Navigator 5
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Contacts.
Selecting a contact’s
address…
Your PocketPC’s contacts list opens.
2. Tap the respective contact’s entry and hold until you get the
context menu:
3. Tap MEDION-Navigator.
3a The following screen opens when there was more than one
address to be found for the respective contact:
Navigation
- 51 -
User's manual MEDION-Navigator 5
3b Tap the OK button, which belongs to the address you want to
use as destination.
MEDION-Navigator adopts the address.
For information on saving destinations to the FAVOURITES,
please refer to "Saving a destination", page 59.
5.3.4
Indicating destinations on the map
You may indicate a destination directly on the map. In addition to
towns and streets, you may also select special destinations
quickly..
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
- 52 -
Indicating a destination
User's manual MEDION-Navigator 5
Indicating a
destination on the
map…
1. On the DESTINATION screen, tap Select on map.
The MAP screen opens:
2. Tap on the place you want to determine as destination and
hold.
A circle of blue points appears round the selected place:
Navigation
- 53 -
User's manual MEDION-Navigator 5
Database information on the respective place will be loaded
and displayed. Below the information, there are command
buttons for several functions which are available for the
selected place.
You have the following options:
This function is only available when GPS reception is possible
(The GPS-symbol must be GPS ready).
Tap the Start navigation button to start navigation to the
selected place.
Caution: Using this function while you are already navigating
deletes all current destinations (stage points and destination
point).
Tap the Save button to save the selected place. You may
then at any time select this place from the FAVOURITES.
Tap the Search nearby button to search for a point of
interest near the selected place.
This function is only available in "Extended mode".
Tap the Add button to add the selected place to your
itinerary. The selected point will be marked by a little flag. It
will also be added to the list of route points of the ROUTE
PLANNING screen where it figures as destination point.
Using this function while you are already navigating causes an
immediate recalculation of your route.
This function is only available in "Extended mode".
Tap the Interim destination button to make the selected point
the next stage point of your itinerary. Your route will be
recalculated immediately.
- 54 -
Indicating a destination
User's manual MEDION-Navigator 5
5.3.5
Favourites
Survey
All destinations you have saved by tapping the Save button are
listed on the FAVOURITES screen. On this screen you may:
Ù select destinations for navigation purposes,
Ù rename destinations, and
Ù delete destinations from the list.
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Favourites.
Navigation
- 55 -
User's manual MEDION-Navigator 5
Standard mode
Saved destinations
1. In the MAIN MENU, tap Favourites.
The FAVOURITES screen opens.
2. Tap the entry of the respective destination.
For information on working with lists, please refer to "Lists",
page 26.
3. Tap
.
The ADDRESS screen opens. The address data of the selected
destination is entered into the respective fields.
For information on deleting or renaming saved destinations,
please refer to "Destination management", page 59.
- 56 -
Indicating a destination
User's manual MEDION-Navigator 5
5.3.6
Recent destinations
Survey
All destinations you have navigated to recently are listed on the
RECENT DESTINATIONS screen. On this screen you may:
Ù select destinations for navigation purposes,
Ù Add destinations to the SAVED DESTINATIONS list, and
Ù delete destinations from the RECENT DESTINATIONS list.
Extended mode
1. In the MAIN MENU, tap Navigation.
The DESTINATION screen opens.
Tap the Country entry field and select the destination
country if it is not yet indicated.
Note: Only countries of which at least a part is represented
on the currently loaded map may be selected.
1b On the DESTINATION screen, tap Recent destinations.
Standard mode
Navigation
1. In the MAIN MENU, tap Recent destinations.
- 57 -
User's manual MEDION-Navigator 5
Recent destinations
The RECENT DESTINATIONS screen opens.
2. Tap the entry of the desired destination.
For information on working with lists, please refer to "Lists",
page 26.
3. Tap
.
The destination will be taken over. The address is entered into
the respective fields.
5.3.7
Using your home address
Survey
If you have stored your home address you may quickly start
navigation home at any place.
For information on saving your home address, please refer to
"Home address", page 112.
Navigating
homewards…
1. On the MAIN MENU tap the Home icon.
The route is now being calculated and navigation starts.
The calculation is based on the settings you have configured
in SETTINGS – ROUTE OPTIONS.
For details, please refer to "Settings", page 104.
- 58 -
Indicating a destination
User's manual MEDION-Navigator 5
5.4
Destination management
Survey
Destinations may be stored in two lists:
Ù the FAVOURITES
Ù the RECENT DESTINATIONS list
Every destination you are indicating and the destinations from
the RECENT DESTINATIONS list may be added to the FAVOURITES.
This makes sense if you want to navigate more often to the
respective destination.
Destinations from the FAVOURITES may be renamed.
Items from both lists may be deleted.
5.4.1
Saving a destination
Precondition
You have entered a destination as described in "Indicating a
destination", page 41
- OR –
You have opened the RECENT DESTINATIONS list as described in
"Recent destinations", page 57.
1. Tap the Save icon.
.
If you have opened the RECENT DESTINATIONS list, tap the
Edit icon.
.
The NAME OF DESTINATION screen opens.
Navigation
- 59 -
User's manual MEDION-Navigator 5
2. Enter a name for the destination.
For information on the use of the keyboard, please refer to
"Software keyboard", page 20.
3. Tap
.
The destination has now been added to the FAVOURITES.
5.4.2
Renaming a destination
1. On the DESTINATION screen, tap Favourites.
The FAVOURITES screen opens.
2. Select the destination you want to rename.
For information on working with lists, please refer to "Lists",
page 26.
- 60 -
Destination management
User's manual MEDION-Navigator 5
3. Tap the Edit icon.
The NAME OF DESTINATION screen opens.
4. Enter the new name of the destination.
For information on the use of the keyboard, please refer to
"Software keyboard", page 20.
5. Tap
.
The destination is now renamed.
Navigation
- 61 -
User's manual MEDION-Navigator 5
5.4.3
Deleting a destination
Precondition
You have opened the FAVOURITES as described in "Favourites",
page 55
- OR –
You have opened the RECENT DESTINATIONS list as described in
"Recent destinations", page 57.
1. Tap the entry of the destination to be deleted.
For information on working with lists, please refer to "Lists",
page 26.
2. Tap the Delete icon.
The CONFIRM screen opens.
3. Tap
to delete the destination from the list.
The destination is now deleted from the list.
5.5
Indicating several destinations (Itinerary with
stages)
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Itinerary planning
- 62 -
You may plan itineraries without receiving GPS-signals, e.g.
comfortably at home. Planned itineraries may be stored. Thus
you may plan as many itineraries as you want, e.g. for holidays.
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
5.5.1
Indicating route points
Planning itineraries…
1. On the MAIN MENU, tap Route planning.
The ROUTE PLANNING screen opens:
2. Tap the Add route point icon to enter the first route point.
The DESTINATION screen opens.
3. Indicate the destination as described in "Indicating a
destination", page 41.
4. Tap Add.
Navigation
- 63 -
User's manual MEDION-Navigator 5
The ITINERARY PLANNING screen opens. The destination is
added as stage point 1.
5. Repeat steps 2-4 for every stage point you want to add to the
itinerary.
- 64 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
5.5.2
Editing, saving and managing itineraries
Survey
You may plan as many itineraries as you want, e.g. for holidays.
You may save them and use them later for navigation purposes.
At any moment, you may add stage points, modify the order of
the stages, or display the itinerary on the map.
The following commands are available on the ITINERARY
PLANNING screen:
Selection
These icons are deactivated when the list does not contain any
route point.
Up
Tap this icon to move the selection one route point up.
Tap this icon several times to move the selection several route
points up.
Down
Tap this icon to move the selection one route point down.
Tap this icon several times to move the selection several route
points down.
Changing the order
Route point up
Tap this icon to navigate to the respective stage point earlier
(example: stage 3 becomes stage 2).
Route point down
Tap this icon to navigate to the respective stage point later
(example: stage 2 becomes stage 3).
Deleting and adding route points
Delete route point
Tap this icon to delete the selected route point from the list.
This icon is deactivated when not route point is selected.
Add route point
Navigation
Tap this icon to add a stage point. The new stage point will be
added before the stage point which currently has the focus. You
may shift it using the Route point up and Route point down
icons.
- 65 -
User's manual MEDION-Navigator 5
Managing itineraries
Save itinerary
Only itineraries that contain at least one route point may be
saved. Otherwise this icon is deactivated.
1. Tap this icon to save the itinerary you have planned.
The NAME OF THE ITINERARY screen opens.
2. Enter a name for the itinerary.
For information on the use of the keyboard, please refer to
"Software keyboard", page 20.
3. Tap
OK.
Note: Only the route points will be saved. If you load an
itinerary, you will have to recalculate it.
- 66 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
Load itinerary
This icon is deactivated if there is no saved itinerary available.
1. Tap this icon to load a saved itinerary, e.g. to modify it or for
navigation purposes.
The SELECT ITINERARY screen opens:
2. Select the itinerary you want to load.
For information on working with lists, please refer to "Lists",
page 26.
3. Tap
Navigation
.
- 67 -
User's manual MEDION-Navigator 5
Rename itinerary
1. Tap the Load itinerary icon. (This icon is deactivated if there
is no saved itinerary available)
The SELECT ITINERARY screen opens:
For information on working with lists, please refer to "Lists",
page 26.
2. Tap the Edit icon.
The NAME OF THE ITINERARY screen opens:
3. Enter the new name of the itinerary.
For information on the use of the keyboard, please refer to
"Software keyboard", page 20.
- 68 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
4. Tap
OK.
The SELECT ITINERARY screen reopens. The itinerary has been
renamed.
or
Delete itinerary
5. Tap OK to load the renamed itinerary.
- OR Tap the Back icon to open the ROUTE PLANNING screen
without loading an itinerary.
1. Tap the Load itinerary icon. (This icon is deactivated if there
is no saved itinerary available)
The SELECT ITINERARY screen opens:
For information on working with lists, please refer to "Lists",
page 26.
Navigation
- 69 -
User's manual MEDION-Navigator 5
2. Tap the Delete icon to delete the selected itinerary.
The CONFIRM screen appears.
3. Tap
.
The SELECT ITINERARY screen reopens. The deleted route is no
more listed.
- 70 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
5.5.3
Calculating the route
An itinerary may be calculated even without GPS reception in
order to get an impression on the route.
The system assumes then the first route point to be the start
point of the route.
Note: When you start navigation, the system identifies your
current position and makes it the start point. The first indicated
route point is then the first stage point.
1. Tap this icon to calculate the distance and the estimated
duration of the entire itinerary.
The ROUTE OPTIONS screen opens:
2. Determine the route options.
For detailed information on setting the route options, please
refer to "Routing options", page 109.
Note: The standard settings for the route options may be
changed on the ROUTE OPTIONS screen. For detailed
information on changing the standard settings refer also to
"Configuring MEDION-Navigator", page 103.
Navigation
- 71 -
User's manual MEDION-Navigator 5
3. Tap the Calculate route icon.
The route is being calculated. A message window informs you
on the progress of calculation.
When the route is calculated, the total distance and the
estimated duration from the first to the last route point are
displayed below the route points list of the ITINERARY PLANNING
screen.
Furthermore, the distance and the estimated duration of each
stage will be indicated with the selected route point entry.
- 72 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
5.5.4
Displaying the itinerary on the map
Show itinerary
Tap the Show on map button to display the entire itinerary on
the map.
The map screen opens.
The itinerary is highlighted in orange.
The route points are marked by flags.
For information on working with maps, please refer to "Working
with the map", page 79.
5.5.5
Simulation
Simulating the route
You may execute a simulated navigation along the itinerary when
the route has been calculated.
Note: The reception of GPS-signals is not necessary for the
simulation.
Simulation is restricted to routes of 60 miles max.
Navigation
- 73 -
User's manual MEDION-Navigator 5
1. Tap the Show on map button.
The itinerary is displayed on the map.
2. Tap short on any place on the map.
The ADDITIONAL FUNCTIONS screen opens.
- 74 -
Indicating several destinations (Itinerary with stages)
User's manual MEDION-Navigator 5
3. Tap Simulation.
The route will be recalculated for simulation purposes.
Simulation starts when calculation has finished.
Stopping the
simulation
You may quit a simulation at any moment.
1. Tap short on any place on the map.
The ADDITIONAL FUNCTIONS screen opens.
2. Tap Stop navigation.
5.6
Starting navigation
Precondition
You have entered a destination as described in "Indicating a
destination", page 41,
- OR You have selected a destination from the FAVOURITES as
described in "Favourites", page 55,
- OR –
You have selected one of your RECENT DESTINATIONS as described
in "Recent destinations", page 57,
- OR You have planned or loaded an itinerary as described in
"Indicating several destinations (Itinerary with stages)", page 62.
Navigation
- 75 -
User's manual MEDION-Navigator 5
Extended mode
1. Tap Start navigation.
The ROUTE OPTIONS screen opens:
2. Determine the route options.
For detailed information on setting the route options, please
refer to "Routing options", page 109.
Note: The standard settings for the route options may be
changed in SETTINGS – ROUTE OPTIONS. For detailed
information on changing the standard settings refer to
"Settings", page 104.
The system calculates the route.
The map screen opens. Your current position is indicated by a
green arrow. The route is highlighted in orange.
- 76 -
Starting navigation
User's manual MEDION-Navigator 5
Note: When you start navigation after having planned or
loaded an itinerary, then your current position is the start
point of the route. The first indicated route point is then the
first stage point of your route.
Standard mode
1. Tap Start navigation.
The system calculates the route.
The map screen opens. Your current position is indicated by a
green arrow. The route is highlighted in orange.
Note: The route will be calculated with regard to the current
route options settings. The standard settings for the route
options may be changed in SETTINGS – ROUTE OPTIONS. For
detailed information on changing the settings refer to "Settings",
page 104.
Navigation
- 77 -
User's manual MEDION-Navigator 5
No GPS reception?
When the received GPS signal is not sufficient, the following
message appears:
You have two possibilities:
Ù Wait until navigation starts. This will happen as soon as the
GPS reception is sufficient.
Cancel and restart navigation as soon as the
Ù Tap
reception of GPS signals is convenient. You may notice that
by watching the GPS symbol on the screen: it becomes GPS
ready when the reception is good.
- 78 -
Starting navigation
User's manual MEDION-Navigator 5
6
Working with the map
Topics covered in this chapter:
6.1 Selecting a map
page 80
6.2 Operating the map
page 82
6.3 Representation of the map in navigation mode
page 88
6.4 Displaying additional information on the map
page 89
Working with the map
- 79 -
User's manual MEDION-Navigator 5
6.1
Selecting a map
Provided maps
There are additional maps on CD included in the delivery. In case
you want to use one of these maps, copy it via a card reader to a
memory card.
Selecting a map
To load another map which is available on the currently inserted
memory card, proceed as follows:
1. If the desired map is on another memory card than the
currently inserted one, open the MAIN SCREEN and tap the
Quit button.
1a Remove the memory card, which is currently inserted.
1b Insert the memory card, which contains the map you want to
work with.
1c Start MEDION-Navigator over.
Note: You need not execute steps 2 to 4 unless there is more
than one map stored on the inserted memory card.
2. On the MAIN SCREEN, tap the Map button.
- 80 -
Selecting a map
User's manual MEDION-Navigator 5
The AVAILABLE MAPS screen opens:
3. Tap the entry of the map you want to work with.
4. Tap
.
The selected map is now loaded. The MAIN SCREEN opens.
Working with the map
- 81 -
User's manual MEDION-Navigator 5
6.2
Operating the map
Survey
There are various pieces of information available on the MAP
screen. Learn in this chapter about the possibilities for working
with the map, which depend on whether you are in navigation
mode or not.
Displaying the map
You may display the map
Ù while planning an itinerary,
Ù in order to show destinations on the map, or
Ù in order to select destinations on the map.
Extended mode
In "extended mode", you may display the map
Ù Via the Show map button on the MAIN MENU
Ù Via the Select on map button on the DESTINATION screen
Ù Via the Show on map button on the ADDRESS screen after
having entered an address.
- 82 -
Operating the map
User's manual MEDION-Navigator 5
Standard mode
In "standard mode", you may display the map
Ù Via the Show on map button on the ADDRESS screen after
having entered an address.
The MAP screen opens.
The map is being displayed automatically when you start
navigating.
Tapping the map
Tapping short any place on the map makes the ADDITIONAL
FUNCTIONS screen appear. Depending on whether you are in
navigation mode or not this screen offers different functions.
Tapping long a certain place on the map (tap and hold) makes
information on that place appear. You may then, e.g., take over
the data for navigation purposes.
For details, please refer to "Indicating destinations on the map",
page 52.
Working with the map
- 83 -
User's manual MEDION-Navigator 5
Icons
Survey
The Map screen disposes several icons which allow altering the
representation of the map.
Hide/show icons
(When without GPSreception)
This icon allows you to hide all other icons in order to see more of
the map.
Tap this icon again to show the other icons.
Automode
(When with GPSreception)
Tap this icon to display the standard representation of the map
after you have modified the view.
The settings of north orientation and auto zoom mode will be
applied. Your current position will be centred. The icons will not
be displayed.
For details, refer to "Automode", page 108.
Freeze
This icon is activated in navigation mode only.
Tap the Freeze icon
/
)
(
to toggle between "Frozen map" and "Frozen position".
Frozen position (default)
This mode (button down) makes the map scroll continually. Your
current position (green arrow) is always centred in the bottom
third of the map.
Frozen map
This mode (button up) freezes the map. Your current position
(green arrow) moves over the map and may even leave it.
This mode applies automatically when you scroll the map in
navigation mode. Otherwise the system would always try to keep
your current position in the bottom third of the map.
Select this mode when you want to select a destination from the
map while navigation is in progress.
- 84 -
Operating the map
User's manual MEDION-Navigator 5
Zoom / Scroll
Tap the Zoom/Scroll icon
/
)
(
to toggle between Zoom and Scroll mode.
Zoom
In Zoom mode (Button up) you may scale the map up or down.
Zoom in by drawing a rectangle on the map, beginning with the
upper left corner. Zoom out by beginning with the lower right
corner.
Scroll
In Scroll mode (button down) you may scroll the map. Tap on the
screen and drag to the desired direction.
Entire route
Tap the Itinerary icon to display the whole itinerary.
Map in driving
direction/north
oriented
Tap the In driving direction/North oriented icon
/
)
(
to switch between the two available modes of map orientation.
(North orientation / orientation in driving direction).
North orientation
Tap this icon (button down) to orientate the map north up.
Tap this icon (button up) to orientate the map in driving
direction.
3D view
Tap this icon to display the map in 3D mode (bee flight view).
2D view
Tap this icon to return to the 2D mode (standard).
Zoom in
Tap Zoom in to scale the map down.
Zoom bar
Tap one of the zoom bar sections to modify the scale of the map.
Zoom out
Tap Zoom out to scale the map up.
Working with the map
- 85 -
User's manual MEDION-Navigator 5
Additional functions
Tapping short any place on the map makes the ADDITIONAL
FUNCTIONS screen appear. Depending on whether you are in
navigation mode or not this screen offers different functions.
The range of offered functionality depends also on whether you
are working in standard or in extended mode.
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
The ADDITIONAL FUNCTIONS screen opens:
Tap this icon to toggle between "Day" and "Night" map view
mode.
Tap this icon to switch the voice instructions on / off.
Preferences
Tap Preferences to display the SETTINGS screen. For details,
please refer to "Settings", page 104.
Quit navigation
This function is only available in navigation mode. Tap Quit
navigation to exit navigation mode.
- 86 -
Operating the map
User's manual MEDION-Navigator 5
Block road, Unblock
These functions are only available in navigation mode.
For details, please refer to "Blocking a route section", page 95.
Set interim destination
This function is only available in navigation mode. Tap Set
interim destination to add a new route point to your itinerary.
The route will be recalculated and the newly added route point
will be the first destination to navigate to. Navigation to the other
route points will be executed later.
For details, please refer to "Adding a stage point during
navigation", page 94.
Route options
This function is only available in navigation mode. Tap Route
options to modify them.
For details, please refer to "Routing options", page 109.
Next destination
This function is only available when you are navigating a route
with at least one stage point and when you are working in
extended mode.
Use this function if you want to skip the next stage point.
Example: You have planned an itinerary from your office to
"Company A" and then to "Company B" and you are already on
your way. Before you arrive at "Company A", a mobile phone call
informs you that you need not visit Company A.
Tap the Next destination button to navigate to the stage point
after the next (here: "Company B").
The system recalculates the route. "Company B" will be your next
destination.
Refer also to "Next destination", page 95.
Working with the map
- 87 -
User's manual MEDION-Navigator 5
6.3
Representation of the map in navigation mode
In navigation mode, there is some assistance for navigation,
some information on the itinerary and one more command button
being displayed:
Assistance for
navigation
The following assistance for navigation is being displayed at the
left and at the bottom of the map:
Field
Information
c
If there are two manoeuvres to be executed quickly
one after the other, the small upper arrow field
indicates the manoeuvre to be executed immediately
after the next manoeuvre.
d
The green arrow indicates your current position on the
map. Since the displayed sector of the map changes
continually your current position is centred on the
map whenever possible (Moving Map).
e
The bigger arrow field indicates the next manoeuvre
to be executed.
f
The distance field indicates the distance to the next
manoeuvre. When you approach, the representations
changes into a distance bar:
The more yellow bars are displayed the nearer you
are to the place where the next manoeuvre must be
executed.
- 88 -
g
The upper street field indicates the name of the next
street to turn on.
h
The lower street field indicates the name of the street
you are currently on.
Representation of the map in navigation mode
User's manual MEDION-Navigator 5
Information on the
itinerary
At the right of the map, the following information on the itinerary
is being displayed:
Field
Information
This symbol means "stage". All information displayed
below refers to the next stage point.
ETA (Estimated time of arrival).
Remaining time to arrival (estimated).
Remaining distance to arrival (estimated).
Tap this icon to repeat the last spoken instruction. All available
information will be displayed.
The displayed information will be hidden after a few seconds.
6.4
Displaying additional information on the map
In MEDION-Navigator you may determine which information is
to be displayed on the map. Modifying any configuration begins
on the SETTINGS screen.
Configuring the
display of additional
information…
1. Open the SETTINGS screen
Ù by tapping the Settings button on the MAIN MENU,
Ù or by tapping short into the map and selecting
Preferences.
The SETTINGS screen opens.
Working with the map
- 89 -
User's manual MEDION-Navigator 5
2. Select Map information using the arrow buttons:
Info bar
The Info bar at the bottom of the map displays the scale of
the map, the inclination, the compass, and the current speed.
.
3. Tap the respective command button to display (On) or not
(Off) the Info bar.
Points of Interest
4. Tap the respective command button to display (On) or not
(Off) Points of Interest on the map.
Street names
5. Tap the respective command button to display (On) or not
(Off) Street names on the map.
6. Via the arrow buttons select Route information:
- 90 -
Displaying additional information on the map
User's manual MEDION-Navigator 5
7. Tap the command buttons to display (On) or not (Off) the
respective information on the map.
The desired information on the entire itinerary (upper section)
and on the current stage (lower section) will be displayed at
the right hand side of the map.
Section
Information
This symbol means "itinerary". All
information displayed below refers to
the final destination.
This symbol means "stage". All
information displayed below refers to
the next stage point. This section is only
available if you have indicated more
than one destination to navigate to.
Line 2
ETA (Estimated time of arrival).
Line 3
Remaining time to arrival (estimated).
Line 4
Remaining distance to arrival
(estimated).
8. Tap Save to save the modifications.
The modifications will be taken over and displayed on the
map.
Working with the map
- 91 -
User's manual MEDION-Navigator 5
7
Useful functions for
navigation
Topics covered in this chapter:
7.1 Adding a stage point during navigation
page 94
7.2 Next destination
page 95
7.3 Blocking a route section
page 95
7.4 Using TMC functionality
page 96
7.5 Keeping the logbook
Useful functions for navigation
page 100
- 93 -
User's manual MEDION-Navigator 5
Survey
In MEDION-Navigator the following functions are available in
navigation mode:
Ù Adding a stage point during navigation, see below
Ù Skipping the next stage point, see page 95
Ù Blocking a route section, see page 95
Ù Using TMC functionality, see page 96
Ù Keeping the logbook, see page 100
7.1
Adding a stage point during navigation
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Adding a stage point
during navigation…
At any moment during navigation you may add a new stage point
to your itinerary. The route will be recalculated in order to make
the new stage point the next destination to navigate to. The
other remaining stage points will be navigated to after the new
one.
Adding a stage
point…
Precondition: The map is being displayed in navigation mode.
1. Tap short on any place on the map.
2. Tap Set interim destination
The DESTINATION screen opens.
3. Indicate the new stage point as described in "Indicating a
destination", page 41.
4. Tap the Set as route point button.
The route will be recalculated in order to make the new stage
point the next destination to navigate to.
Note: Select the new stage point directly on the map, just as
described in "Indicating destinations on the map", page 52. Tap
the respective place and hold. From the context menu, select
Add as route point.
- 94 -
Adding a stage point during navigation
User's manual MEDION-Navigator 5
7.2
Next destination
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Next destination
Next destination
This function is only available when you are navigating a route
with at least one stage point and when you are working in
extended mode.
Use this function if you want to skip the next stage point.
Example: You have planned an itinerary from your office to
"Company A" and then to "Company B" and you are already on
your way. Before you arrive at "Company A", a mobile phone call
informs you that you need not visit Company A.
Tap the Next destination button to navigate to the stage point
after the next (here: "Company B").
The system recalculates the route. "Company B" will be your next
destination.
7.3
Blocking a route section
Blocking a route
section manually
You may block a route section manually in order to evade it.
Manual blocking forces a recalculation of the route.
Presume that you are driving on a freeway and a radio message
announces a traffic jam 4 miles ahead of your current position.
With the "Block route sections" function you may instruct the
navigation system to evade the announced traffic jam.
A manual blocking is only valid for the current navigation
process. The respective route section will be unblocked for the
next navigation or when you restart the software.
Blocking a route
section…
Precondition: The navigation system is in navigation mode and
the map is being displayed.
1. Tap short on any place on the map.
2. Tap Block road.
The BLOCKING screen opens.
2. Enter how many miles (from your current position on) you
want to block.
3. Tap OK.
Useful functions for navigation
- 95 -
User's manual MEDION-Navigator 5
This forces a recalculation of the route. The indicated route
section will be evaded. On the map, it will be highlighted in
red.
Unblocking a route
section
1. Tap short on any place on the map.
2. Tap Unblock.
The route section is now unblocked. The navigation system
uses the route, which had been calculated originally.
7.4
Using TMC functionality
TMC-receiver
A TMC-receiver provides the navigation system with the latest
traffic information and enables dynamic route calculation in order
to evade traffic jams and other obstructions. If you have
connected a TMC-receiver, you may check traffic information with
MEDION-Navigator.
Note: This function cannot be used without an external TMCreceiver connected.
1. Tap the TMC icon.
The TMC screen opens.
- 96 -
Using TMC functionality
User's manual MEDION-Navigator 5
Displaying traffic
information…
2. Use the arrow icons of the "Messages" section to display the
next / previous traffic message.
Every message contains the country, the name or number of
the street (motorway, main road, country road), the
concerned road section and the kind of obstruction.
Updating traffic
information
3. Tap the Update icon to display traffic information which has
been received since the TMC screen has been opened.
Closing the TMC
screen
4. Tap the OK icon to close the TMC screen.
Considering TMC information for route calculation
Considering TMC
information for route
calculation
Configure the TMC settings to determine how TMC information
concerning your route should be considered.
Automatic route
modification
Precondition: You have selected "Route modification
automatically" in the TMC settings (default).
For details, please refer to "Settings", page 104
If a reported obstruction concerns your route the system evades
obstructions automatically.
The following message appears while the system calculates the
deviation.
Useful functions for navigation
- 97 -
User's manual MEDION-Navigator 5
Route modification
with confirmation
Precondition: You have selected "Route modification with
confirmation" in the TMC settings.
The following screen informs you about a reported instruction
concerning your route:
Evade
Tap the Evade button to evade the reported obstruction.
The route will be recalculated in order to evade the obstruction.
Ignore
Tap the Ignore button to ignore the reported obstruction.
Considering TMC
information at a later
moment
If you have selected "Route modification With confirmation",
you may evade or ignore a reported obstruction at a later
moment. Proceed as follows:
1. Tap the TMC symbol.
The TMC screen opens:
- 98 -
Using TMC functionality
User's manual MEDION-Navigator 5
2. Use the arrow icons of the "Messages" section to search for
an obstruction concerning your route. These obstructions are
labelled "on the route".
3. Tap the Status button and select whether the respective
obstruction is to be Evaded or Ignored.
4. Tap the Done icon to update the route. The system
recalculates the route if necessary.
Tuning
Tuning
1. Tap the Tuning button to toggle between the Auto tuning,
Hold station, and Frequency input modes.
Auto tuning
In Auto tuning mode, the TMC module searches continually for
the station which is best received. The name and the frequency
of the station are being displayed.
Use the arrow keys of the "Station" section to receive another
station.
As soon as another station has been found, its name and
frequency are being displayed.
Hold station
If you want to hold the sender which is currently being received,
press straight on the centre of the cursor pad as often as
necessary to display Hold station.
The TMC receiver holds now this station. Nevertheless, it changes
the frequency when the same station is better received on
another one.
The name of the station and the frequency on which it is
currently being received are being displayed.
Frequency input
If you want to enter a certain frequency switch to the Frequency
input mode.
Use the arrow keys of the "Station" section to modify the
frequency in steps of 0.1 MHz.
If a station may be received on the currently tuned frequency its
name is being displayed. The bars at the right of the frequency
indicate the quality of reception.
Press the OK soft key to save the settings and to close the TMC
INFORMATION screen.
Useful functions for navigation
- 99 -
User's manual MEDION-Navigator 5
7.5
Keeping the logbook
Survey
You may make MEDION-Navigator keep a logbook. Any start of
the logbook forces the creation of an Excel file in the root
directory of your PocketPC. You may transmit these files to your
PC and open them with, e.g., Microsoft Excel.
Starting the
logbook…
1. Tap the Logbook icon.
The LOGBOOK screen opens:
2. Enter the reason of your journey into the Comment field.
3. Enter the mileage at the beginning of your trip into the
Mileage field.
4. Tap the Reason button and indicate whether it is a Business
journey or a Private journey.
5. Tap
.
The system creates the first logbook entry. The Logbook icon
toggles to
Logbook activated.
Exiting the logbook…
Collecting data on your trip stops when you arrive at your
destination, when you quit navigation, or when you quit
MEDION-Navigator.
Alternatively you may tap the Logbook icon. Tap the Action
field and select Exit. The Logbook icon toggles to
Logbook deactivated..
- 100 -
Keeping the logbook
User's manual MEDION-Navigator 5
Adding an entry…
You may possibly want to add entries to the logbook, e.g. when
your car was refuelled or when you have visited several clients
without using your car. In this case tap the Logbook icon. Tap
the Action field and select Add entry.
Working with the
logbook…
you may transmit the logbook files to your PC where you may
open them and modify the entries (if necessary).
1. Establish an ActiveSync connection between your PC and
your PocketPC. (For details refer to the manual or your
PocketPC)
2. In the root directory of your PocketPC select "Logbook.xls".
3. Copy the file to your PC and open it with Microsoft Excel.
4. The following information is provided by the logbook files: the
mileage at the beginning of the journey, the reason of the
journey, town and street, the date of the journey, distance,
and others. You may print the logbook or, if necessary, add
them to the logbook you are keeping for tax purposes.
Useful functions for navigation
- 101 -
User's manual MEDION-Navigator 5
8
Configuring MEDIONNavigator
Topics covered in this chapter:
8.1 Settings
page 104
User mode
Map information
Route information
Volume
Representation
Automode
Routing options
Logbook
Key configuration
Itinerary
Format
GPS
TMC
Home address
Product information
Configuring MEDION-Navigator
- 103 -
User's manual MEDION-Navigator 5
8.1
Settings
Configuration
In MEDION-Navigator, you may modify the following settings:
Ù User mode, see page 105
Ù Map information, see page 105
Ù Route information, see page 106
Ù Volume, see page 107
Ù Representation, see page 107
Ù Automode, see page 108
Ù Routing options, see page 109
Ù Logbook, see page 110
Ù Key configuration, see page 110
Ù Itinerary, see page 110
Ù Format, see page 111
Ù GPS, see page 111
Ù TMC, see page 112
Ù Home address, see page 112
Ù Product information, see page 112
On the MAIN SCREEN, tap the Settings button to configure
MEDION-Navigator.
On the SETTINGS screen, tap the arrow icons to select the
configuration you want to modify.
Tap the Save button to apply your modifications if you have
made some.
- 104 -
Settings
User's manual MEDION-Navigator 5
8.1.1
User mode
User mode
On the USER MODE screen, you may effect the following
modifications:
Your current user mode is indicated on the Current user mode
field.
Tap Current user mode to switch to the other user mode.
The name of the user mode you want to switch to becomes the
caption of the entry field.
Tap Save to save the changes.
Note: When you switch to standard mode, a dialog window asks
you whether you want to keep the configuration changes you
have made in extended mode. This dialog window appears even
when you have not made any configuration changes. Tap Yes.
Restoring the factory
settings…
1. If you want to restore the factory settings, tap the Factory
settings command.
2. Confirm the restoration.
8.1.2
Map information
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Info on the map
On the MAP INFORMATION screen, you may effect the following
modifications:
Element
Signification
Info bar
The Info bar at the bottom of the map
displays the scale of the map, the
inclination, the compass, and the current
speed.
Tap the respective command button to
display (On) or not (Off) the Info bar.
Points of Interest
Tap the respective command button to
display (On) or not (Off) Points of
Interest on the map.
Street names
Tap the respective command button to
display (On) or not (Off) Street names on
the map.
Configuring MEDION-Navigator
- 105 -
User's manual MEDION-Navigator 5
8.1.3
Route information
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Route info
On the ROUTE INFORMATION screen, you may effect the following
modifications:
Element
Signification
ETA at final dest.
ETA (Estimated time of arrival) at the final
destination.
Remaining time to the final destination
(estimated).
Remaining distance to the final destination
(estimated).
Tap the respective command buttons to
display (On) or not (Off) the respective
information on the map.
All information displayed below refers to
the final destination. .
Time to final dest.
Dist. to final dest.
ETA at next dest.
Time to next dest.
Dist. to next dest.
ETA (Estimated time of arrival) at the next
stage point.
Remaining time to the next stage point
(estimated).
Remaining distance to the next stage point
(estimated).
Tap the respective command buttons to
display (On) or not (Off) the respective
information on the map.
All information displayed below refers to
the next stage point.
This section is only available if you have
indicated more than one destination to
navigate to
- 106 -
Settings
User's manual MEDION-Navigator 5
8.1.4
Volume
Volume
On the VOLUME screen, modify the volume of the spoken
indications of the navigation system.
Tap the Volume field and select another value.
8.1.5
Representation
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Representation
On the REPRESENTATION screen, you may effect the following
modifications:
Setting
Signification
Skin
Skins are made to personalize the user
interface of MEDION-Navigator.
Tap the Skin field.
Select one of the available skins and tap
OK.
Darken at night
Tap this field and select whether the screen
or your PocketPC is to be darkened at night
or not.
Configuring MEDION-Navigator
- 107 -
User's manual MEDION-Navigator 5
8.1.6
Automode
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Auto mode
- 108 -
On the AUTO MODE screen, you may effect the following
modifications:
Setting
Signification
Begin with
Select the default map view: 2D or 3D.
3D Autozoom
Select the default for navigation with 3D
view:
Autozoom or No Autozoom.
With Autozoom, the system changes the
scale of the map depending on your current
speed: When you drive slowly, the scale
becomes small. When you drive fast, the
scale becomes high.
2D Autozoom
Select the default for navigation with 2D
view: Low Autozoom, Standard
Autozoom, High Autozoom, or No
Autozoom.
With Autozoom, the system changes the
scale of the map depending on your current
speed: When you drive slowly, the scale
becomes small. When you drive fast, the
scale becomes high.
The lower the Autozoom, the lower the
scale.
2D View
Select the default for navigation with 2D
view: North oriented or In driving
direction.
Settings
User's manual MEDION-Navigator 5
8.1.7
Routing options
Routing options
On the ROUTING OPTIONS screen, indicate your speed profile. This
entry will have an effect on the calculation of the remaining time
and of the estimated time of arrival (ETA).
1. Tap the Speed profile button. Select one of the available
profiles and tap OK.
2. Tap the Type of routing field and select one of the following
options:
Option
Signification
Dynamic route
(TMC)
This option is only available when an
external TMC receiver is connected.
With this option, the quickest route will be
calculated. Reported traffic obstructions
on your route will be considered
automatically.
The Fast route is being calculated when
TMC is not received.
Fast route
The quickest route will be calculated.
Short route
The shortest route will be calculated.
3. Tap the Motorways, Ferries, and Toll roads fields
successively and select one of the following options:
Option
Signification
Permitted
The respective kind of street will be
regarded for route calculation.
Avoid
The respective kind of street will be
avoided if reasonable.
Forbidden
The respective kind of street will be
disregarded for route calculation.
Configuring MEDION-Navigator
- 109 -
User's manual MEDION-Navigator 5
8.1.8
Logbook
Logbook
On the LOGBOOK screen, determine whether the logbook is to be
started automatically at the beginning of navigation (Yes) or not
(No).
Tap the Start automatically button to toggle between Yes and
No.
Independent from the settings made here, you may at any time
start or stop the logbook via the
/
icon. .
8.1.9 Key configuration
Hardware keys
On the KEYS screen, you may configure the hardware keys of
your PocketPC to execute the "Up", "Down", "Left", "Right", "OK"
and "Return" actions. This enables convenient and easy
operation.
When you quit the navigation software, the keys will have their
standard functionality.
Tap the Configure button to check or to modify the
configuration.
8.1.10 Itinerary
This function is only available in "Extended mode".
For information on how to change the user mode, please refer to
"Changing the user mode", page 32.
Proceeding
automatically to the
next stage point…
On the ITINERARY screen, determine whether you want to
navigate automatically to the next stage point after having
reached a stage point (Yes) or not (No).
Tap the Proceed automatically to the next stage point
button to toggle between Yes and No.
If you don’t proceed automatically, you may proceed as follows:
1. In navigation mode, tap short on any place on the map.
2. Select Next destination.
- 110 -
Settings
User's manual MEDION-Navigator 5
8.1.11 Format
Units
8.1.12
GPS
On the FORMAT screen, determine which units are to be used for
time and distance indications.
Setting
Signification
Time
Tap the Time field to toggle between
12 hours (AM/PM) and 24 hours time
format.
Distance
Tap the Distance field to toggle between
kilometres or miles distance units.
GPS
On the GPS screen, configure the GPS receiver.
Tap Automatic detection when you have connected an external
GPS-receiver. Follow the instructions on the screen.
Tap Manual settings when automatic detection is not
successful. Set the following values:
Setting
Signification
Receiver
Tap the Type of receiver field. Select the
appropriate receiver from the list and tap
OK.
COM port
Tap the COM-port field and indicate the
COM / USB-port used by the receiver.
If you are using a GPS receiver of another
brand than NAVIGON (Type: Other
receiver), enter the respective Baud rate
into the Baud field.
Baud
Automatic search
Configuring MEDION-Navigator
- 111 -
User's manual MEDION-Navigator 5
8.1.13
TMC
TMC
On the TMC screen, determine whether route modifications
caused by TMC traffic information are to be carried out
automatically or with explicit confirmation.
Tap the Route modification field to toggle between
Automatically and With confirmation.
8.1.14 Home address
Home address
On the HOME ADDRESS screen, you may save your home address
to quickly start navigation homewards from anywhere.
1. Tap Enter your home address.
The DESTINATION screen opens.
2. Tap the Address button and enter your home address as
described in "Entering an address", page 41.
3. Tap the Set as home address button.
The address is indicated on the HOME ADDRESS screen.
8.1.15 Product information
Product information
On the PRODUCT INFORMATION screen, the name and the version
of the software are displayed.
Tap Show intro to make the system explain its most important
functions.
- 112 -
Settings
User's manual MEDION-Navigator 5
9
Appendix
Topics covered in this chapter:
9.1 Annex A: Problem solutions
page 114
Performance
GPS receiver
Appendix
- 113 -
User's manual MEDION-Navigator 5
9.1
Annex A: Problem solutions
9.1.1 Performance
Slow calculation
Route calculation is very slow; the voice indications in navigation
mode are coming late.
The efficiency of both route calculation and navigation depends
on the amount of free memory and on the kind of memory card
you use.
In order to navigate properly, the system should dispose of at
least 15MB of free memory on your PocketPC.
9.1.2
GPS receiver
Possible error
sources concerning
the initialisation of
the GPS receiver
If the GPS symbol stays red (no GPS-reception) even though the
system has been installed correctly, this may be due to one of
the following reasons:
Ù Reason A: an incorrect COM-port is selected.
Ù Reason B: the receiver is not supplied with power.
A
The GPS receiver is connected to another COM-port than COM 1.
1. On the main screen, tap the Configuration button.
The CONFIGURATION screen opens.
2. Via the arrow buttons, select GPS.
3. Tap Automatic detection when you have connected an
external GPS-receiver. Follow the instructions on the screen.
- 114 -
Annex A: Problem solutions
User's manual MEDION-Navigator 5
4. Tap Manual settings when automatic detection is not
successful. Set the following values:
5. Tap the COM-port field.
6. Select another COM-port.
When the GPS symbol becomes green, you may start
navigation.
B
The cigarette-lighter is not permanently supplied with power.
If the GPS symbol stays red (no GPS-reception) even though you
have tried all available COM-ports, it may be that your cigarettelighter is not permanently supplied with power.
1. Quit MEDION-Navigator.
2. Start your engine.
3. Restart MEDION-Navigator.
4. The GPS receiver should now be ready for use within short
time (the GPS symbol becomes green). In the future, start
your vehicle before starting the navigation software.
The GPS receiver
takes long to be
ready to use
Appendix
The GPS receiver has a battery which maintains saving data
collected during the initialisation process.
Once the initialisation has been executed successfully, there is
two modes of starting the GPS receiver up:
Mode 1
takes about 5 to 6 minutes. The GPS receiver has
not been used for at least one week.
Mode 2
takes about 1 to 2 minutes. The GPS receiver has
been used almost daily.
- 115 -
User's manual MEDION-Navigator 5
10 Glossary
COM-port
A COM port is a connector to a communications interface, usually
the serial port. The ports are numbered by a number behind
"COM". A communications interface is designed to connect
hardware like a mouse or a GPS receiver.
GMT
GMT (Greenwich Mean Time) is the mean solar time at the Royal
Greenwich Observatory in Greenwich near London, England,
which by convention is at 0 degrees geographic longitude.
Theoretically, noon Greenwich Mean Time is the moment when
the Sun crosses the Greenwich meridian (and reaches its highest
point in the sky in Greenwich). Up to 1972, GMT was the global
time standard. Because of the Earth's uneven speed in its elliptic
orbit, GMT has been replaced by UTC (Universal Time
Coordinated) which is an ultra stable time standard based on
atomic clocks.
GPS
The GPS (Global Positioning System) is based on 24 satellites
which are in orbit round the earth. They are permanently
emitting the time and their current position. The GPS receiver
receives this information and calculates the longitude and the
latitude of its own current position.
The signals of at least three satellites are needed to determine
the longitude and the latitude. With the signals of at least four
satellites the elevation may be calculated, too. The determination
has an accuracy of about 3 yards.
HDOP
The Horizontal Dilution of Precision (HDOP) indicates the quality
of position determination. Theoretically any value from 0 to 50 is
possible. The smaller the value is, the more accurate is the
position determination (value 0 = no deviation from the actual
position). Values up to 8 are convenient for street navigation.
POI
Point of Interest (POI). See ÎSpecial destination.
RDS
Radio Data Signal (RDS) is a service offered by broadcasting
stations. TMC information is broadcasted via RDS.
Special destination
Special destinations, also called POI (Points of Interest), are
covered by the map and may be displayed on it. Harbours,
airports, restaurants, hotels, petrol stations, public buildings, and
others belong to the special destinations. You may determine
special destinations as itinerary points for navigation purposes.
TMC
Traffic Message Channel (TMC) supplies your navigation system
with the latest traffic information. A TMC module which is
available as accessory receives the signals which are broadcasted
by radio stations.
Glossary
- 117 -
User's manual MEDION-Navigator 5
11 Index
A
Additional functions ......................... 86
Assistance for navigation.................. 88
B
Blocking......................................... 95
C
Contacts ........................................ 50
Addresses ................................... 50
Current position .............................. 88
D
I
Indication of destinations
Contacts...................................... 50
Favourites ................................... 55
Home address .............................. 58
On the map ................................. 52
Points of interest .......................... 43
Recent destinations....................... 57
Saved destinations........................ 55
Info bar .................................. 90, 105
Information
Itinerary...................................... 91
Stage.....................................89, 91
Interim destination .....................87, 94
Itinerary ................................. 91, 110
Itinerary planning............................ 62
Destination
Delete......................................... 62
Navigate to.................................. 75
Rename ...................................... 60
K
E
L
ETA (Estimated Time of Arrival)........106
Logbook ................................ 100, 110
F
M
Favourites ...................................... 55
Main screen ...............................37, 39
Map............................................... 82
2D view....................................... 85
3D view....................................... 85
Day / Night .................................. 86
Display...................................38, 82
Freeze......................................... 84
Hide/show icons ........................... 84
Info bar....................................... 90
Information ................................. 89
Itinerary...................................... 85
Orientation .................................. 85
Points of Interest ................... 90, 105
Route.......................................... 85
Scroll .......................................... 85
Street names ........................ 90, 105
Zoom .......................................... 85
Zoom in ...................................... 85
Zoom out .................................... 85
MEDION-Navigator
Online help .............................38, 40
G
GMT .............................................. 24
GPS .............................................. 16
GPS icon ................................ 24, 25
Signals........................................ 16
GPS receiver................................... 36
COM-port ...................................114
Initialisation................................. 14
Mount ......................................... 13
Possible error sources ..................114
Settings .....................................111
H
HDOP ............................................ 24
Home address ......................... 58, 112
Index
Keyboard ....................................... 20
Keys............................................ 110
- 119 -
User's manual MEDION-Navigator 5
Quit....................................... 39, 40
Start........................................... 37
N
Navigation
Proceed automatically ..................110
Quit............................................ 86
start ........................................... 75
P
POI ............................................... 43
Points of interest ............................. 43
In certain town............................. 47
Nationwide .................................. 49
Nearby........................................ 43
Points of Interest ..................... 90, 105
Position
Freeze ........................................ 84
Proceed automatically .....................110
R
RDS .............................................. 16
Recent Destinations ......................... 57
Remaining distance ........................106
Remaining time..............................106
Route information ........................... 88
Route options .......................76, 77, 87
Route planning ............................... 62
Route section
Block .......................................... 95
Unblock....................................... 96
Routing options..............................109
Service ............................................ 7
Settings
Auto mode................................. 108
Format ...................................... 111
GPS .......................................... 111
Home address ............................ 112
Info on the map ......................... 105
Itinerary.................................... 110
Itinerary info.............................. 106
Keys ......................................... 110
Logbook .................................... 110
Representation ........................... 107
Route info.................................. 106
Routing options .......................... 109
Speed profile.............................. 109
TMC.......................................... 112
User mode ................................. 105
Volume ..................................... 107
Skins ........................................... 107
Software-keyboard .......................... 20
Speed profile ................................ 109
Stage ............................................ 91
Stage point..................................... 94
Street names ........................... 90, 105
Support ........................................... 7
T
Time of arrival .............................. 106
TMC ..................................16, 96, 112
Initialisation................................. 15
Tuning ........................................ 99
U
Units ........................................... 111
S
V
Screen
Additional functions ...................... 86
Configuration ..............................104
Destination ............................. 41, 42
Favourites ................................... 56
Itinerary planning ......................... 63
Point of interest............................ 44
Recent destinations ...................... 58
Settings .....................................104
Search facilities................................. 4
Security information ........................ 17
Voice command..........................86, 89
Volume ........................................ 107
- 120 -
Z
Zoom bar ....................................... 85
Index
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising