USB Receipt Printer Setup Install Epson Receipt Printer Drivers

USB Receipt Printer Setup Install Epson Receipt Printer Drivers
30475 S Wixom Road
Suite 100
Wixom MI, 48393
800.423.8100
USB Receipt Printer Setup
Follow the steps below to setup your USB receipt printer1:
Install Epson Receipt Printer Drivers
1. From the Tools drop-down menu select Options.
2. Click the Hardware Setup tab.
3.
Under the Receipt Printer section, click the Configure Receipt Printer button.
4. Select the Use Epson USB Printer option.
5. Click on Install Driver.
6. A message box will prompt you asking if you are sure you would like to install the drivers. If you are
sure this is an Epson USB printer, then select Yes.
7. A message box will now prompt you asking if you would like to install the drivers from the CD or the
Internet.
•
•
CD: If you are installing from the CD, make sure the software by DaySmart Software CD is in the
CD/DVD drive and select the CD option and click OK. A list of drivers for your system will be
displayed. Select the option for the printer and operating system that you have and click OK.
Internet: If you do not have the CD and would like to install the drivers from the Internet, select
the Internet option and click OK. This will take you to the web page with a list of drivers. Click on
the Epson Receipt Printer Drivers link. After it finishes downloading, run the driver setup file.
8. The software will perform a silent installation of the Epson drivers. It will ask you to select your
printer from a list of supported Epson receipt printers. If you do not know the model, there is
typically a silver sticker on the right-hand side of the printer with the model number, i.e. TM-T88IV.
The installation may take a few minutes and the computer may automatically restart if necessary.
9. After the setup finishes, connect your Epson receipt printer to the USB port on your computer.
Make sure the printer has paper in it and the green light is on with no red error lights.
10. You can test your printer by going back into the Receipt Printer Setup screen, see Steps 1 – 3.
11. Click the Print Test Receipt button to print a test receipt to verify the printer is working correctly.
12. Click OK, and then OK again to save the settings and return using the software.
1: Do not connect your Epson receipt printer to the USB port on your computer until instructed to do so.
Failure to do this may result in installation complications.
Page 1 of 1
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement