HV-F127

HV-F127
HV-F127-AP_C_M03_121227.pdf
Instruction Manual
Electronic Pulse Massager
HV-F127
CONTENTS
Before Using the Unit
REL
INTE
/POWNSITY
ER
IEV
E
OF
F
SOLE
SHLD
R
LEG
RE
GIO
N
TAP
KNEA
D
WAIST
PUSH
RUB
MA
SSA
GE
SO
FT
RE
PE
AT
Notes on Safety...............................1
Features of the Product ..................3
Components of the Product ............3
Information on High &
Low-Frequency Therapy ...............4
Names and Functions
of the Parts ...................................5
PO
INT
R
SP
E
MOCIAL
DE
W
WID
E
How to Use
How to Insert the Batteries .............7
PU
EL
EC
T
E M RON
IC
AS
SA
GE
R
LS
■ Thank you for purchasing the OMRON Electronic Pulse
Massager HV-F127.
■ Please read this Instruction Manual thoroughly before using
this unit for the safe and correct use of it.
■ Please keep this Instruction Manual always at hand for your
future reference.
How to Connect the Electrode Cord .. 7
How to Attach the Pad ....................8
Examples of Application ..................9
How to Treat ..................................11
Treat the region with the
Relieve Button .........................13
Treat the region with the
Region Button ..........................14
Treat the region with the
Massage Button.......................15
After Treatment –Storing the unit....16
Maintenance
When it is Difficult to Attach
the Pad ........................................17
How to Clean and Store the Unit .......18
Troubleshooting .............................19
Specifications ................................20
Before Using the Unit
Notes on Safety
(Please read this section carefully before using the unit.)
● The icons and warning signs are indicated here for your safe and correct use of the product as well as to prevent
injuries and/or damage to properties.
● The icons and meanings are as follows:
Examples of Icons
The
icon indicates prohibitions (must not do).
Matters involving certain prohibitions are indicated by text or pictures in or near
The icon to the left means “Prohibitions to Disassemble”.
.
The ● icon indicates something that is compulsory (must be observed).
Matters involving certain compulsory actions are indicated by text or pictures in or near ●.
The icon to the left refers to “General compulsory action”.
DANGER
This
(1)
(2)
(3)
unit must not be used in combination with the following medical devices:
Internally transplanted electronic medical devices, e.g. pacemakers
Electronic life support equipment, such as respirators
Electronic medical devices attached to the body, such as electrocardiographs
Using this unit with other electronic medical devices may cause erroneous operation of
those devices.
WARNING
Persons with the following conditions must consult the doctor before using this unit.
1) acute disease
2) malignant tumor
3) infectious disease
4) pregnancy
5) cardiac dysfunction
6) high fever
7) abnormal blood pressure
8) skin sensory disorders or skin problems
9) receiving medical treatment, especially those feeling discomfort
May cause an accident or ill health.
Do not use this unit near the heart, above the neck, on the head, around the mouth or on
diseased skin.
May cause an accident or ill health.
Do not use this unit simultaneously with other therapeutic device or in combination with
ointments including spray-type ointments.
May cause discomfort or ill health.
Do not use this unit for purposes other than treatment indicated in this manual.
May lead to accident, trouble, or failure of the unit.
Do not insert the electrode cord plug into any place other than the electrode cord jack of the
main unit.
May cause an electric shock or accident.
Do not disassemble or remodel this unit.
May cause fire, trouble, or accident.
1
Notes on Safety
CAUTION
If the unit is not functioning properly or you feel discomfort, immediately stop using the unit.
If you feel any trouble with your body or skin, consult the doctor and follow his/her instructions.
If you want to move the Electrode Pad to another region or your body during treatment, be sure
to turn off the power.
If not, you may receive strong electrical shock.
Do not try to attach the Pads to any other person during the treatment.
You may receive strong electrical shock.
Do not start treatment while wearing an electronic device.
The settings and timings of the device may be affected.
Do not use this unit on infants or people not capable of expressing their intensions.
May cause an accident or ill health.
Do not use this unit in places with high humidity such as the bathrooms or while taking a bath
or shower.
You will receive a strong electrical shock.
Do not use this unit while sleeping.
The main unit may develop trouble, or the pad may move to an unexpected region and cause ill
health.
Do not use this unit while driving.
Receiving sudden strong stimulation may lead to traffic accident or trouble.
Do not leave the Electrode Pad attached to the skin after treatment.
Prolonged attachment may cause skin irritation or infection.
Be careful not to allow any metal object, such as belt buckle or necklace come into contact
with the Electrode Pad during treatment.
If not, you will receive a strong electrical shock.
Do not use cellular phones near the Low-Frequency Electrotherapy Electronic Pulse Massager.
The unit may operate erroneously.
Do not use this unit to treat one region for a long time (more than 30 minutes).
The muscles of the region under treatment may be exhausted and cause poor physical condition.
2
Features of the Product
* 9 Automatic Courses
The device allows you to select your favourite stimulation programme from 9 Automatic Courses for optimized
treatment according to your symptom and needs.
RELIEVE Button (for muscle pain)
This function provides pain relief with high frequency of 1200 Hz. It is suitable for treatment of pain in the lower back
and joints.
REGION Button (4 courses for shoulders, sole, calf, and lower back)
Treats the selected region with pre-programmed courses.
MASSAGE Button (4 courses of Tapping, Kneading, Pushing, and Rubbing)
Allows you to select the massage method according to your needs.
* 4 Special Modes
Allows you to adjust the unit to your favourite stimulations.
Use the Special Modes of SOFT, REPEAT, POINT, WIDE and Balance Adjustment (switching between red and
white buttons) in combination with the Automatic Course to receive treatment in your favourite stimulation mode.
* Washable and long-lasting Long-Life Pads
Components of the Product
The following components are included in the box.
If any components are missing, please contact the nearest OMRON dealer.
1. Main unit
INTENSITY
/POWER
RELIEVE
OFF
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
2. Type K Electrode Cord
Note: This is a consumable.
3. Long-Life Pad
(to be referred to as "Pad"
hereinafter.)
One set contains two Pads.
❇ These are consumables.
5. Electrode Holder
6. Soft Fabric Case
POINT
R
SPECIAL
MODE
W
WIDE
ELECTRONIC
PULSE MASSAGER
3
4. Two AAA batteries for trial
use
7. Instruction Manual
Information on High & Low-Frequency Therapy
What is High Frequency?
Effects of high frequency stimulation
High frequency stimulation is for pain relief.
What is Low Frequency?
A treatment method using the physiological action
Although we do not notice, our bodies generate very weak electricity from various parts of the body including the brain,
heart, muscles, and nerves. This electricity is called bioelectricity. The bioelectricity plays an essential role for the
normal functioning of our bodies. Our bodies sensitively react to electric stimulation applied from the outside and
cause various changes. The method to treat abnormality of bioelectricity, which is manifested as stiffness or pain, by
using the above mentioned action is called electrotherapy of which low-frequency therapy is typical.
Mechanism of low-frequency electrotherapy
Muscle
Pumping action of muscles
Muscles contract and relax with the flow of the low-frequency current. This helps to
activate the pumping action of the heart. When the muscle relaxes, a large amount of
blood flows in, and when the muscle contracts, the blood containing wastes is pumped out.
With repeated actions, the blood flows smoother and the blood circulation is improved.
Blood vessel
Shutting out pain signal
When low-frequency current flows to the region experiencing pain, it acts on the transmission mechanism of pain.
Thus low-frequency current is said to reduce the transmission of pain to the brain.
Actions of the low-frequency current
What is frequency?
Frequency is the number of times electric stimulation is applied to the body per second and is represented by a unit
called Hertz (Hz).
Effects of low frequency stimulation
Low-frequency stimulation is suitable for pain relief,
stiffness and numbness.
It is said to have the effects to activate secretion of painsuppressing substance or to improve the blood circulation.
one second
one second
3 stimulation in a second = 3 Hz
100 stimulation in a second = 100 Hz
Standard treatment time
Long-time treatment and strong stimulation cause muscular fatigue and generate adverse effects.
In order to avoid the excessive treatment, Electronic Pulse Massager, model HV-F127 is made to turn off the power
automatically in 15 minutes.
4
Names and Functions of the Parts
Electrode Cord
Main Unit
Connects the Main unit with the Pad
Electrode Cord Plug
Intensity Adjustment
Dial/Power Button
Electrode
Cord Jack
Turns on and off the power
and adjusts the intensity of
stimulation.
OFF
INTENSITY
/POWER
RELIEVE
OFF
SOLE
Automatic Course
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
Select one programme from each course
in the treatment, region, and massage
method.
Relieve Button
The program treats the region with high frequency of
1200 Hz, which helps to relieve pain.
MASSAGE
SOFT
Region Button
REPEAT
The unit treats the selected region with the program.
POINT
R
SPECIAL
MODE
W
WIDE
Massage Button
Select your favourite massage method according to
your symptom.
ELECTRONIC
PULSE MASSAGER
Special Mode
You can use this mode when you want to
adjust the stimulation to your favourite
programme according to the stiffness and
pain. This mode can be used in combination
with any Automatic Courses.
.......................................................
Battery
Cover
Soft Mode
SOFT
The unit relieves stiffness comfortably
with soft stimulation without giving the
feel of irritation.
.......................................................
Back of the Main Unit
Repeat Mode
REPEAT
5
The unit repeats your favourite stimulation.
Electrode Cord Plug
Attach the red or the white plug
to each Pad.
e
Tab of the Pad
Hold the Tab to peel off
the Pad.
Point & Wide Mode
The unit treats the red and the white sides alternately.
POINT
The unit treats both the red and white sides simultaneously.
WIDE
❇ Select either the Wide or the Point Button.
Balance Adjustment
(Switching between
red and white
buttons)
R
The unit emphasize therapy on the red side.
W
The unit emphasize therapy on the white side.
Selecting
...
When
POINT
is
WIDE
is
selected
...
When
selected
n.
R
Selecting
W
Selecting None of Them
Emphasis on intensity is
placed upon the red side
while treating both sides
alternately.
Emphasis on intensity is
placed upon the white
side while treating both
sides alternately.
Treats both red and white
sides with the same
intensity alternately.
Emphasis on intensity is
placed upon the red side
while treating both sides
simultaneously.
Emphasis on intensity is
placed upon the white
side while treating both
sides simultaneously.
Treats both red and white
sides with the same
intensity simultaneously.
6
How to Use
How to Insert the Batteries
1. Turn the Intensity Adjustment Dial/Power Switch to the “OFF” position.
2. Open battery cover on the back of the main unit.
3. Insert batteries according to the polarities shown in the
battery compartment.
SIZE'AAA'
1.5V LR03 OOOOOO
SIZE'AAA'
1.5V LR03 OOOOOO
4. Close the battery cover.
General advice from OMRON on the handling of batteries
•
•
•
•
The supplied batteries are for the trial use only and may wear out in less than three months.
Replace the worn batteries with new ones immediately.
If you are not going to use the unit for more than three months, remove the batteries.
If you leave the unit without using it for a long time when the batteries are included inside, leakage from the
batteries may occur leading to trouble.
• Do not use new and worn batteries together or different types of batteries together.
• Insert the batteries with the polarities (+ and –) in correct alignment.
• When handling the batteries, be sure to read the notes on the batteries.
Standard for battery replacement
If you feel the massage stimulation is weak, the batteries may be worn. Replace the batteries with new ones.
How to Connect the Electrode Cord
1. Turn the Intensity Adjustment Dial/Power Switch to
the “OFF” position.
2. Connect the Electrode Cord with the Main Unit.
Insert the Electrode Cord Plug into the Electrode Cord Jack.
3. Connect the Electrode Cord to the Big Pad.
When using the unit for the first time
Take out the Pads from the clear plastic bag.
❇ Do not peel off the clear film attached to the Pad at this time.
7
Place the Pad on a flat surface and securely connect the Electrode Cord Plug
with the Pad.
❇ Although Electrode Cord Plugs are provided in red and white, either plug can
be connected with one of the Pads irrespective of color.
General advice from OMRON on the handling of Electrode Cord
• Avoid excessive bending and pulling of the Electrode Cord.
• Hold the Electrode Cord Plug when unplugging the Electrode Cord from the Main Unit.
• If the Electrode Cord is torn or in trouble, please contact the store where you purchased the unit or at the
nearest OMRON dealer.
How to Attach the Pad
Attach each Pad to the region you want to treat without bending it.
When you use the unit for the first time:
A clear plastic film is attached to the Pad.
As the Pad has strong adhesiveness, peel off the clear plastic film from the
Pad and attach the Pad to the region you want to receive treatment.
❇ Discard the peeled off clear film as it should not be used anymore.
❇ It may be difficult for you to attach the Pad on your back such as shoulders or lower
back. It is a good idea to ask someone in your family to help you.
Attach the Pad close to the skin.
❇ If the Pad comes off from the skin, the unit is turned off automatically in approximately 7 seconds.
General Advice from OMRON on the handling of Pad
•
•
•
•
Do not place pads one on top of the other.
Do not bend the Pad.
Do not touch the adhesive surface with your fingers.
When you perspire after taking a bath or immediately after exercising, wipe your sweat off the region you
want to treat before using the unit.
• If the Pad is erroneously adhered to a cloth or so and does not come off easily, do not force to peel it off.
Instead, moisten the back of the cloth to which the Pad is attached with a small amount of water, and then
the Pad will come off easily.
• When the adhesive property of Pad drops, take appropriate measures as necessary.
• If you are going to use a wet Pad or the Pad immediately after it is washed, let it dry sufficiently. Especially
let the adhesive surface air-dry.
8
Examples of Application
Shoulders
Stiff shoulder is presumably caused by blood congestion of trapezius muscle that moves shoulders, compression of
nerves by the accumulation of fatigue substances, or poor blood circulation of subcutaneous tissues such as muscles.
Attach the Pads symmetrically on the region of stiff shoulders with the backbone as the center.
Trapezius muscle
For stiff shoulders, attach the
Pads to the shaded regions as
shown in the diagram.
Sole
Chilly feeling is presumably caused by poor blood circulation in the limbs when the nerves are out of balance.
Swelling and fatigue of foot is presumably caused by the poor reflux of blood and body fluid. Attach one Pad to the
sole and another one to the calf.
Attach the Pads to the shaded
regions of sole as shown in the
diagram.
9
Calf
Swelling and fatigue of Calf is presumably caused by congestion of blood and accumulation of fatigue substances in
that region. Attach the Pads to upper and lower calf.
Attach the Pads to the shaded regions of
calf as shown in the diagram.
Waist (Lower Back)
Back pain is caused by various reasons. The type of back pain that can be treated by low-frequency therapy includes
stiffness of the lower back, muscle pain, and neuralgia (nerve pain).
Attach the Pads symmetrically to the regions you feel pain with the backbone as the center.
Attach the Pads to the
shaded regions of lower
back as shown in the
diagram.
10
How to Treat
This section explains the treatment procedure and the entire operation flow from turning on the power
to storing of the unit.
Three treatment methods are available. Select your favourite one to receive treatment.
– Treat with the Relieve Button
When you want to relieve pain.
– Treat with the Region Button
When you want to treat the selected region of shoulder, sole, calf, and lower back (waist) with the
program.
– Treat with the Massage Button
When you want to treat the region according to your symptom and favourite operation by selecting the
massage method from Tapping, Kneading, Pushing, and Rubbing.
Have you connected the Electrode Cord? (Refer to Page 7.)
Have you attached the Pads to the regions you want to receive treatment? (Refer to Page 8.)
1. Turn on the power.
Rotate the Intensity Dial/Power Button downwards.
When you hear a click, the power is turned on and the treatment
starts.
INTENSITY
/POWER
RELIEVE
OFF
SOLE
LEG
WAIST
SHLDR
REGION
❇ When you use the unit for the first time, the Shoulder light will flash
and WIDE will be displayed. When you use the unit for the second
time and after, the Buttons you used in the previous treatment
will flash.
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
POINT
R
If the Pads come off:
2. Select one treatment method.
11
W
WIDE
If the Pads come off from the skin, the power will be turned off
automatically in approximately 7 seconds. Turn the Power to OFF,
then re-attach the Pads correctly and turn on the power again.
– Treat with the Relieve Button
– Treat with the Region Button
– Treat with the Massage Button
SPECIAL
MODE
(Refer to Page 13.)
(Refer to Page 14.)
(Refer to Page 15.)
ELECTRONIC
PULSE MASSAGER
ck
Cli
3. Adjust the intensity of stimulation.
Select your favorite intensity level from 1 to 10 by rotating the
Intensity Dial/Power Button.
INTENSITY
/POWER
RELIEVE
OFF
SOLE
Standard for treatment
Duration: 10 to 15 minutes per region for each time
Number of treatment times: Once or twice in a day
Intensity: As much as you feel comfortable when using this unit
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
POINT
SPECIAL
MODE
R
W
WIDE
ELECTRONIC
PULSE MASSAGER
4. When the treatment ends, turn off the power.
Rotate the Intensity Dial/Power Button upwards. When you hear a
click, the power is turned off.
❇ The power will be turned off automatically in approximately 15
minutes after the treatment starts. Even when the power is turned
off automatically, turn off the Intensity Dial/Power Button.
Otherwise, the batteries will wear out slightly faster.
INTENSITY
/POWER
RELIEVE
ck
Cli
OFF
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
POINT
R
SPECIAL
MODE
W
WIDE
ELECTRONIC
PULSE MASSAGER
5. Store the unit.
❇ If you leave the Pads as they are, they will become dirty or the
adhesiveness will deteriorate. When the treatment ends, attach
the Pads to the Electrode Holder for storage.
(Refer to Page 16.)
Continued on the following page.
12
How to Treat
Treat the region by selecting one course from Relieve, Region, and Massage.
Treat the region with the RELIEVE
Button
When you want to relieve pain
1. Push the Relieve Button.
This is a program using high-frequency stimulation of 1200 Hz, which
is said to relieve pain.
With the use of various stimulations of 1200 Hz frequency, you will
not get bored or become addicted to the treatment. This method is
suitable for pain relief.
INTENSITY
/POWER
RELIEVE
1
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
❇ When you use the unit for the first time, the Shoulder light will flash
and WIDE will be displayed. When you use the unit for the second
time and after, the Button you used in the previous treatment
will flash.
SOFT
REPEAT
POINT
RELIEVE
R
❇ The Button you have selected will be flashing.
SPECIAL
MODE
W
WIDE
How to use the Special Mode
▼
ELECTRONIC
NERVE STIMULATOR
If you do not like the feel of irritation:
Use the Soft Mode.
❇ The Button you have selected will be
flashing.
❇ To stop the function you selected, push the
Button again.
13
SOFT
▼
You can use this Mode when you want to
adjust the stimulation to your favourite one
according to the stiffness or the pain.
You can use this Mode in combination with all
Automatic Courses.
The unit relieves stiffness with soft stimulations without giving the feel of irritation.
If you want to repeatedly use only your
favourite stimulation:
Use the Repeat Mode.
REPEAT
The unit repeats your favourite stimulation.
Treat the region with the
REGION
Button
When you want to treat the selected region of shoulder, sole, calf (leg), and lower back (waist) to which
the Pads are attached with the program
1. Push the Region Button.
Each time you push the Region Button, the display flashes in the
order of Shoulder, Sole, Leg, and Waist.
INTENSITY
/POWER
RELIEVE
❇ When you use the unit for the first time, the Shoulder light will flash
and WIDE will be displayed. When you use the unit for the second
time and after, the Button you used in the previous treatment
will flash.
1
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
2. Select the region to which the Pads are attached.
POINT
For example, if you attach the Pads to your shoulders, select
Shoulder. The unit treats you with the program for Shoulder.
SOLE SPECIAL LEG
R
SHLDR
MODE
W
WIDE
WAIST
REGION
❇ The Button you have selected will be flashing.
ELECTRONIC
NERVE STIMULATOR
▼
When Shoulder is selected
If you want to relieve stiff shoulders intensively and fully:
▼
Select the Point Mode.
If you want to massage a wide range of the region such as the lower back:
▼
Select the Wide Mode.
If you want to use different kinds of stimulation for the right and left sides
according to the stiffness:
Select red or white Button.
POINT
R
SPECIAL
MODE
W
Point & Wide Mode, Balance Adjustment (Switching between Red and White Buttons)
The stimulation of each Pad varies.
(For detail use of this Mode, refer to Page 6.)
WIDE
Continued on the following page.
14
How to Treat
Treat the region by selecting one course from Relieve, Region, and Massage.
Treat the region with the MASSAGE Button
When you want to treat the region according to your symptom and favourite operation by selecting the
massage method from Tapping, Kneading, Pushing, and Rubbing
1. Push the Massage Button.
Each time you push the Massage Button, the massage method
flashes in the order of Tapping, Kneading, Pushing, and Rubbing.
INTENSITY
/POWER
RELIEVE
❇ When you use the unit for the first time, a Shoulder Button will flash
and WIDE will be displayed. When you use the unit for the second
time and onward, the Button you used in the previous treatment
will flash.
1
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
2. Select your favourite massage method according to
your symptom.
POINT
TAP
KNEAD
R
The massage type changes automatically as you select it.
PUSH
SPECIAL
MODE
RUB
W
WIDE
MASSAGE
❇ The Button you have selected will be flashing.
ELECTRONIC
NERVE STIMULATOR
When Tapping
is selected
How to use the Special Mode
▼
You can use this Mode when you want to adjust the stimulation to your favourite one according to the stiffness or the pain.
You can use this Mode in combination with all Automatic Courses.
❇ The Button you have selected will be flashing.
❇ To stop the function you selected, push the Button again.
If you do not like the feel of irritation:
▼
Use the Soft Mode.
The unit relieves stiffness with soft stimulations
SOFT
without giving the feel of irritation.
If you want to repeatedly use only your favourite stimulation:
Use the Repeat Mode.
The unit repeats your favourite stimulation.
▼
REPEAT
If you want to relieve stiff shoulders intensively and fully:
▼
If you want to massage a wide range of the region such as the lower back:
▼
Select the Point Mode.
If you want to use different kinds of stimulation for the right and left sides
according to the stiffness:
Select the Wide Mode.
Select red or white Button.
POINT
R
SPECIAL
MODE
WIDE
15
W
Point & Wide Mode, Balance Adjustment (Switching between Red and White Buttons)
The stimulation of each Pad varies.
(For detail use of this Mode, refer to Page 6.)
After Treatment – Storing the unit
If you leave the Pads without taking care of them, they will become dirty or the adhesive property will
drop. When the treatment ends, attach the Pads to the Electrode Holder and store them.
1. Turn off the Power and remove the Electrode Cord
Plug from the Main Unit.
2. Peel off the Pad.
Example: When the Pad is attached
to shoulder
❇ Hold the Tab to peel off the Pad without touching the adhesive
surface.
3. Lightly attach the Pad to the Electrode Holder
❇ You may leave the Electrode Cord connected with the Pad as it is.
❇ Do not press the Pad hard to the Electrode Holder. It may cause
the adhesive surface to be damaged.
❇ Keep the Electrode Holder clean.
4. Bundle the Electrode Cord and wrap it around the
Electrode Holder.
❇ Wrap the Electrode Cord loosely.
5. Store the Main Unit and the Electrode Holder in the
Soft Fabric Case.
INTENSITY
/POWER
RELIEVE
OFF
SOLE
LEG
WAIST
SHLDR
REGION
KNEAD
TAP
PUSH
RUB
MASSAGE
SOFT
REPEAT
POINT
R
SPECIAL
MODE
W
WIDE
ELECTRONIC
PULSE MASSAGER
16
Maintenance
When it is Difficult to Attach the Pad
Wash the Pad when the adhesive surface of Pad becomes dirty and the Pad is difficult to attach.
– Wash the Pads after every thirty uses. Pads can be washed approximately ten times.
– Pads are consumables. Purchase the optional Pad when the adhesive surface is damaged. (Refer to
Page 20.)
❇ The life of Pad may vary by the frequency of wash, skin condition, and storage state.
1. Turn off the power, then remove the Electrode Cord from the Pad.
2. Wash the Pad softly with your fingertips under slow
running water for several seconds.
3. Sufficiently dry the Pad and let the adhesive surface
airdry.
❇ Do not wipe the adhesive surface with a tissue paper or a cloth. If
a tissue paper is adhered to the adhesive surface by accident, do
not try to peel it off. Instead, moisten the tissue paper with a small
amount of water, and then it will come off easily.
4. Lightly attach the Pad to the Electrode Holder for
storage. (Refer to Page 16.)
General advice from OMRON on the handling of Pads
• Do not use hot water, detergent, or chemicals such as thinner or benzine.
• Do not scratch the adhesive surface with your nail or a brush.
• Do not wash the Pad too long or too frequently.
• Do not store the Pad under high temperature, high humidity, and direct sunshine.
❇ The adhesive surface may be damaged and the Pad may last shorter.
❇ If the adhesive surface becomes sticky or the Pad peels off, leave the Pad in the refrigerator (do not freeze)
overnight. The adhesion may be restored.
17
How to Clean and Store the Unit
How to clean the Unit
ELECTRO
NIC
PULSE
MASSAG
ER
• Keep the unit clean all the time.
• Be sure to turn off the Power and remove the Electrode Cord from the
Main Unit when cleaning the unit.
• Wipe off the stain on the Main Unit with a soft cloth.
• If the unit is heavily stained, wipe it with a cloth moistened with water or
detergent then squeeze it well. Wipe off the unit with a dry cloth.
❇ Be careful so that no water should get into the Main Unit.
Notes on care and storage
Thinner
• Do not use benzine or thinner to clean the unit.
• Do not store the unit under high temperature, high humidity, and direct
sunshine, or where there are lots of dusts and corrosive gas.
• Keep the unit out of reach of children.
• If you are not going to use the unit for a long time of more than three
months, store the unit after removing the batteries.
Benzine
❇ If you do not observe the above-mentioned notes or correct use of
the unit, OMRON cannot take responsibility on quality of the unit.
EL
EC
TR
LS
E M ONI
C
AS
SA
GER
PU
18
Troubleshooting
Problem
■ The power
cannot be
turned on.
■ The power
turns off
too soon.
■ The power
turns off
while using
the unit.
Cause
Remedial Action
■ The batteries are inserted in
wrong direction.
⇒ Insert the batteries in correct direction. (Refer to page 7)
■ The Pads are not attached to
the skin.
■ Pads are removed from the skin.
⇒ If the Pads are not attached to the skin, the power
will turn off automatically.
(Refer to page 8)
⇒ If the Pads come off from the skin, the power
will turn off automatically.
(Refer to page 8)
⇒ Replace the batteries with new ones. (Refer to page 7)
⇒ Turn off the Intensity Dial/Power Button.
Unless it is turned off, the batteries will wear out
slightly faster.
(Refer to page 12)
⇒ Replace the Electrode Cord.
(Refer to page 20)
■ The batteries are worn out.
■ The power turns off automatically
in 15 minutes.
■ The Electrode Cord is broken.
■ The clear film on the adhesive
surface of the Pad is not peeled off.
■ The adhesive surface of Pad is dirty.
⇒Peel off the clear film on the adhesive surface.
■ You used the Pad immediately
after washing it.
■ The adhesive surface of Pad is
damaged.
⇒Sufficiently dry it and leave the adhesive surface to
airdry.
(Refer to page 17)
⇒Pad is a consumable.
Replace the Pad with a new one. (Refer to page 20)
⇒Leave the Pad in the refrigerator overnight.
■ The
adhesive
surface of
Pad is sticky.
■ You used the Pad while you were
perspiring.
■ You washed the Pad too long
and too frequently.
■ You stored the Pad under high
temperature, high humidity, and
direct sunshine.
⇒ Attach the Pad close to the skin.
■ Cannot feel
the
stimulation.
■ The Pad is not attached close to
the skin.
■ The Pads are attached
overlapping each other.
■ The Electrode Cord is not
connected correctly.
■ The intensity is adjusted too weak.
■ The batteries are worn out.
■ The adhesive surface of Pad
is damaged.
■ The treatment time is too long.
⇒ Limit the treatment time to 10 to 15 minutes.
■ The Pad is not attached close to
the skin.
■ The adhesive surface of Pad is
dirty or dried.
■ The adhesive surface of Pad is
damaged.
⇒ Attach the Pad close to the skin.
(Refer to page 8)
⇒ Wash the adhesive surface of Pad softly with your
fingertips for several seconds under slow
running water.
(Refer to page 17)
⇒ Pad is a consumable.
Replace the Pad with a new one.
■ The Pad
does not
attach to the
skin.
■ The skin
turns red.
■ The skin
feels
irritating.
(Refer to page 8)
⇒Wash the adhesive surface softly with your fingertips
under slow running water for several seconds.
(Refer to page 17)
(Refer to page 17)
(Refer to page 8)
⇒ Attach the Pads by not overlapping them. (Refer to page 8)
⇒ Connect the Electrode Cord correctly. (Refer to page 7)
⇒ Turn the Intensity Dial/Power Button. (Refer to page 12)
⇒ Replace the batteries with new ones. (Refer to page 7)
⇒ Pad is a consumable.
Replace the Pad with a new one. (Refer to page 20)
(Refer to page 12)
❇ If the unit does not operate after taking the above-mentioned measures, contact the nearest OMRON dealer.
19
Specifications
Product Name
OMRON Electronic Pulse Massager
Model
HV-F127 (HV-F127-AP)
Power Supply
3 VDC (with two AAA alkaline batteries)
Battery Life
Approx. 3 months: when used 15 minutes a day continuously
Frequency Generation
Approx. 1 to 1200 Hz
Power Consumption
Approx. 85 mA
Operating Temperature and
humidity
10°C to 40°C, 30 to 85% RH
Storage Temperature
–20°C to 60°C, 10 to 95% RH
Main Unit Dimensions
60 (W) x 154 (H) x 21 (D) mm
Weight
Approx. 120 g (including batteries)
Accessories
An Electrode Cord, Type K
A set of Long-Life Pad
Batteries for trial use (2 AAA batteries)
An Electrode Holder
A Soft Fabric Case
An Instruction Manual
❇ In the interest of product improvement, specifications are subject to change without notice.
Symbols:
= Type BF
= Read the instruction manual carefully
This product should not be used by persons with medical implants, e.g. heart pacemakers, artificial
heart, lung or other electronic life support systems.
This OMRON product is produced under the strict quality system of OMRON HEALTHCARE Co. Ltd., Japan.
20
OMRON HEALTHCARE Co., Ltd.
53, Kunotsubo, Terado-cho, Muko,
Kyoto 617-0002 JAPAN
Asia Pacific HQ
OMRON HEALTHCARE SINGAPORE PTE LTD.
438A Alexandra Road, #05-05/08,
Alexandra Technopark, Singapore 119967
www.omron-healthcare.com.sg
OMRON (DALIAN) CO., LTD.
Production Facility Dalian, China
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement