Codelocks NANO 90 lock Programming & Operating Instructions

Below you will find brief information for lock NANO 90. The NANO 90 is a multi-code lock that can be used for a variety of applications. It is pre-programmed with a Master Code and User Code, which can be changed by the user. The lock also has the ability to set or change a Sub-Master Code and Technician Code. It supports both private and public use functions, and you can set the lock to remain locked for a specified duration. It includes a battery override feature for situations when the battery fails.

PDF Download

Document

PROGRAMMING INSTRUCTIONS

CHANGE THE MASTER CODE

#Master Code • 01 • New Master Code • New Master Code ••

Example: #11335577 • 01 • 12345678 • 12345678 ••

Result: Master Code has been changed to 12345678.

SET OR CHANGE THE USER CODE

#Master Code • 02 • User Code ••

Example: #11335577 • 02 • 9999 ••

Result: New User Code 9999 now operative.

DELETE USER CODE

#Master Code • 03 ••

Example: #11335577 • 03 ••

Result: User Code deleted.

SET OR CHANGE THE SUB-MASTER CODE

#Master Code • 04 • Sub-Master Code • Sub-Master Code ••

Example: #11335577 • 04 • 87654321 • 87654321 ••

Result: Sub-Master Code 87654321 now operative.

DELETE THE SUB-MASTER CODE

#Master Code • 05 • 05 ••

Example: #11335577 • 05 • 05 ••

Result: Sub-Master Code deleted.

CHANGE THE SUB-MASTER CODE

#Sub-Master Code • 06 • New Sub-Master Code •

New Sub-Master Code ••

Example: #87654321 • 06 • 10101010 • 10101010 ••

Result: Sub-Master Code has been changed to 10101010.

SET OR CHANGE THE USER CODE

#Sub-Master Code • 07 • User Code ••

Example: #87654321 • 07 • 6666 ••

Result: New User Code 6666 now operative.

DELETE USER CODE

#Sub-Master Code • 08 ••

Example: #87654321 • 08 ••

Result: User Code deleted.

CHANGE THE USER CODE

#User Code • New User Code • New User Code ••

Example: #2244 • 6688 • 6688 ••

Result: User Code now 5541.

SET B) PUBLIC USE

#Master Code • 09 ••

Example: #11335577 • 09 •

Result: The lock will now remain open until the next user enters their own personal code into the lock as follows:

Step 1 - Enter 4 digit code • close the locker which will now be locked.

Step 2 - Enter the same 4 digit code •• the lock will now open and remain open until next 4 digit code is entered.

Note: The Master Code and Sub-Master Code will be retained from A) Private Use.

RESTRICT THE LOCKED TIME

#Master Code • 10 • (number of hours lock to remain locked)

Example: #11335577 • 10 • 04 ••

Result: The lock will auto open after 4 hours. If a new User Code is entered it will relock for 4 hours. If the lock is opened during the 4 hour period then the lock remains open until a new User

Code is entered.

Note: This program only works when the lock is set in B) Public

Use Function. The lock can be set to remain locked for 02, 04, 06,

08, 10 or 12 hours.

SET A) PRIVATE USE

#Master Code • 11 ••

Example: #11335577 • 11 ••

Result: The lock will revert back to default function A) Private Use

Function. Factory set User Code 2244 will now work repeatedly until reprogrammed.

SET TECHNICIAN CODE

#Master Code • 12 • Technician Code • Technician Code ••

Example: #11335577 • 12 • 555555 • 555555 ••

Result: The lock is automatically set into B) Public Use Function and allows the programmed Technician Code to open the lock WITHOUT the entered

User Code being erased.

Note: If lock is opened with a Master Code the User Code will be erased.

DELETE THE TECHNICIAN CODE

#Master Code • 13 • 13 ••

Result: Technician Code deleted.

Programing

& Operating

Instructions

CODES - THE BASICS

• The KitLock NANO 90 has four

code levels available:

i) Master Code

ii) Sub-Master Code

iii) User Code

iv) Technician Code

• The NANO 90 is supplied with two

factory set codes:

Master Code: 11335577

User Code: 2244

• When fitted immediately change

the Master Code and User Code.

• All Master Codes and Sub-Master

Codes are 8 digits long.

• All User Codes are 4 digits long.

• All Technician Codes are 6

digits long.

• The lock ‘open’ time is set at

4 seconds.

FUNCTIONS

Before programming select the most appropriate function for the application.

A) PRIVATE USE

Important Note: This is the default function and is already pre-programmed in new locks.

This is the most common function and is used where the same code

will be repeatedly used.

B) PUBLIC USE

The user enters their own personal four-digit code. This locks the lock.

The same code is entered to open the lock before being erased and ready for the next new user.

This function is used for short term, multi occupancy applications, e.g. hot desking in an office or a locker in a leisure centre.

OPERATING INSTRUCTIONS

The NANO keypad,

The *

90 has a 10 button

and # button.

and # buttons are only used for programming functions.

• Every program command must commence by pressing the # button.

• If necessary the # button may be used to clear a previous entry if a mistake is made.

• To enter a valid code,

5 seconds are allowed between each button input; otherwise the program will once again clear.

CODES

The NANO 90 KitL ock has the following code levels:

A) MASTER CODE

The Master Code can:

• Open the lock

• Change the Master Code

• Set / Change / Delete the

Sub-Master and User Code

• Select between Private and

Public Functions

• Set or delete Technician Code

B) SUB-MASTER CODE

The Sub-Master Code can:

• Open the lock

• Change the Sub-Master

• Set / Change / Delete / the

User Code

• Blue LED = Code accepted

• Red LED = Code rejected

C) USER CODE

The User Code can:

• Open the lock

• Change the User Code

D) TECHNICIAN CODE

The Technician Code can:

• Open the lock in Technician mode without erasing User Code when in B) Public Use Function.

The same code cannot be programmed into more than one level.

LOST CODE PROCEDURE

Note: The procedure requires the door to be open.

• Remove the rear fixing bolts and remove the lock from the door.

• Remove battery.

• Press and hold the

* button, will flash twice, release the * press the button three times.

The Blue LED will flash twice and the lock will have reverted to the factory Master Code 11335577

and all other stored settings

will be erased.

PENALTY TIME

• Entering three incorrect codes will cause the lock to shut down for 10 seconds.

BATTERY POWER

• The KitLock should provide well in excess of 100,000 openings, of

4 seconds each, from 1 x coin cell.

LOW BATTERY

• When the battery power is low the • Red LED will flash three times before the • Blue LED lights accepting the code.

Fit a new battery as soon as this happens.

The lock will operate for 100 times with low battery.

•

Code rejected

low battery indication

•

Code accepted

BATTERY FAILURE OVERRIDE

The NANO 90 has been designed so a PP3 battery can be placed against the external contacts so that the lock can be opened to replace the battery should it fail.

THE PROCEDURE IS AS

FOLLOWS:

• Place the contact points of the

PP3 battery against the contact points next to the LED’s.

• The positive +PP3 terminal against the Red LED contact point, and the negative –PP3 terminal against the Blue LED contact point.

• Enter the Master Code.

• The lock will now withdraw the locking pin allowing the lock to open.

• Fit new battery by removing lock from the door. Refit the lock.

CODELOCKS

HEADQUARTERS

Tel: +44 (0) 1635 239645

Fax: +44 (0) 1635 239644 [email protected]

www.codelocks.co.uk

Helpline, service & spares

Freephone: 0800 393 405

CODELOCKS INC US

Tel: +1 714 979 2900

Fax: +1 714 979 2902 [email protected]

www.codelocks.us

Helpline, service & spares

Toll free: 1.877.codelock

CODELOCKS

(Australia) PTY LTD

Tel: +61 2 9882 1009

Fax: +61 2 9882 6030 [email protected]

www.codelocks.com.au

Helpline, service & spares

Toll free: 1800 052 131

Hello! I am an AI chatbot specifically trained to assist you with the NANO 90 lock Programming & Operating Instructions. I have thoroughly reviewed the document and can help you locate the exact information you need or explain the content in clear and simple terms. Whether you’re looking for guidance on specific features, troubleshooting steps, or general usage, feel free to ask your questions. The more details you provide about your concerns or needs, the more accurately and effectively I can assist you!

Show related prompts

Assistant typing

Assistant terminated

Key features

Private and public use functions
Master, Sub-Master, User, and Technician code options
Set locked time
Battery override feature
LED indicators
Penalty time for incorrect code entry
Low battery warning

Frequently asked questions

To change the Master Code, you need to enter the current Master Code, then select the "Change the Master Code" command. Follow the on-screen instructions to enter a new Master Code.

Yes, you can use the "RESTRICT THE LOCKED TIME" command. Enter the Master Code, followed by the "10" command, and then the desired lock duration in hours (02, 04, 06, 08, 10, or 12 hours).

The NANO 90 has a battery override feature. To open the lock with a dying or dead battery, you can use a PP3 battery to power the lock temporarily. This will allow you to replace the battery.