Rack Power Distribution For Critical IT Equipment

Rack Power Distribution For Critical IT Equipment
Rack Power Distribution For Critical IT Equipment
Emerson Network Power Rack PDU Solutions
Enhanced Performance And Management
Of Dynamic IT Spaces
Enhance Business Agility, Efficiency and Availability with Emerson Network Power Rack PDUs
Data center investments are sizable, and each component of
Our complete portfolio of rack PDUs offers value beyond just power
the power chain -from the building entrance to the rack power
distribution. It easily integrates to your data center infrastructure
distribution - is crucial to enabling equipment availability. Enable your
management systems to make your organization more resilient,
IT investment – and your business – to stay protected with Emerson
enhance your business velocity and provide the technological support
Network Power’s family of rack PDU offerings.
you need to grow your company.
Emerson Network Power’s next generation of rack PDUs provides the
industry’s highest availability and most intelligent power metering
and distribution – complete with the simplified energy management,
modular design and cost savings that ensure your data center – and
your business – can operate at peak velocity and resiliency.
MPX™ and MPH2™ Rack PDUs
Intelligent, real-time infrastructure
Communicate the status of rack-level
power and environmental information to
a centralized Data Center Infrastructure
Management (DCIM).
Allow monitoring and control to the
receptacle level.
DCIM software
Connected
IT infrastructure
Rack PDUs
A
E
SEE
E
LYZ
NA
VAL
IDA
T
SEE
AC
ACT
KN
T
P L AN
2
OW
DECIDE
Optimized level of visibility and control
Provides the information needed to
make informed decisions and enhance
business agility.
How You Benefit from
Emerson Network Power Rack PDUs
Play
Video
Designed For High Availability
Emerson Network Power rack PDUs are designed specifically to
accommodate higher power densities and be resistant to higher
temperatures, commonly found in modern data center racks. System is
designed to optimize basic power availability. They are easily upgradable to
minimize downtime and carry manufacturer-provided support to ensure
High temperature rating
Modular hot swappable controller card
100% rated magnetic hydraulic circuit breakers
MPX™ rack PDU system-modular, adaptive design
Bistable / normally closed relays
your own SLAs.
Optimized Energy And Capacity Management
By providing highly accurate and comprehensive energy metering
from the aggregate to receptacle levels, MPX and MPH2™ rack PDUs
provide visibility to control energy usage by IT equipment, right-size
your power infrastructure and eliminate unnecessary capital expense.
These rack PDUs also have the lowest energy consumption in this category.
Simplified Integration With Management Tools
MPX and MPH2 rack PDUs offer a simplified approach to
implementation and change management that translates to real cost
savings and operational advantages. They support all major industrystandard management, authentication and encryption standards and
protocols, and they fully integrate into Emerson Network Power’s
industry-leading KVM, serial console and infrastructure management
systems. Plus, they integrate rack level power and environmental
monitoring information from the rack PDUs with higher level data center
management software provided by Emerson or third parties.
Compatibility With Racks And Power Chain
Play
Video
Metering of key electrical parameters with
+/-1% accuracy
Lowest PDU power consumption in the industry
of all switched rack PDU’s
Power and environmental trend reports through
several Emerson Network Power DCIM solutions
Play
Video
Up to 4 units sharing an IP address within Rack
PDU Array™
Integration with Emerson Network Power KVM,
serial console and infrastructure management
appliances and software
Integration with Emerson Network Power
software stack
IPv6 support
Support of remote authentication protocols
(LDAP, Active Directory, Radius, Kerberos, TACACS+)
and encryption
Play
Video
Deployable in most industry racks, Emerson Network Power rack PDUs
are simple to install and move. When Emerson racks are purchased, the
rack PDUs may even be pre-installed to save time and cut costs. All major
global voltage and amperage combinations typically used in a data center
or remote site are available–an Emerson Network Power expert can assist in
Ability to be preinstalled in Emerson Network Power
rack solutions
Available in popular voltage and amperage
combinations
selecting the right rack PDU for your power chain needs.
3
MPX™ - Adaptive Rack PDU:
Respond To Change While Watching Your Bottom Line
Confidently take on the uncertain future of connected power requirements with MPX, the most responsive
and adaptive rack PDU available. With MPX rack PDU technology, you can respond to rack equipment changes
and dynamic capacities by leveraging:
Hot-swappable modular output power
Hot-swappable modular communications
Modular input power
MPX Benefits
Adaptive capacity, distribution,
monitoring, control and management
of critical devices
Flexibility to respond to constant
change—redeploy modules to suit
changing needs
Buy only what you need and build
on your investment
Secure communication
Designed for Critical Environments
Critical rack space operating temperature—up to 55˚C / 131˚F
to support hot internal rack environments
Accurate power metering of +/-1% voltage & current for assured oversight
Energy and power metering down to the individual receptacle
Comprehensive alarming including notification of overloaded branch circuits
Environmental sensing with threshold and alarm set-points
Notification on the loss or removal of individual rack equipment loads
Reconfigurable Power Capacity
& Distribution
The MPX rack PDU has a scalable design that
allows onsite configuration to fit immediate
IT equipment needs. It is the perfect choice
to respond to the needs of a growing
data center. Relocate or add IT equipment
to support changing needs, by easily
reconfiguring the power input
and distribution.
Hot Swappable
Output Power
deploy easily to
get IT equipment
online quickly
Fits Needs Now And Later
The MPX rack PDU provides a wide selection
of single phase and three-phase power input
configurations—with the ability to
field change while maintaining
distribution infrastructure.
Modular Input Power
May be reconfigured to support
changing power needs, single
and three phase input
Can be positioned for top or
bottom rack entrance
4
Receptacles &
Modules
may be remotely
controlled and
metered, providing
operator flexibility
and allowing
increased site
security
Click to play MPX animation
Branch Receptacle Modules (MPX™ BRM)
provide output power and branch circuit over
protection. Elementary, branch metered and
outlet metered & switched versions available
Power Rail Chassis
(MPX PRC)
distributes power and
communications to all
of the support modules.
Available in two separate
heights to accommodate
varying rack heights
Power Rail Spacer
reserves the unused space until
an MPX module is needed
MPX PEM variable
capacity module,
for 1 or 3 phase applications.
Detachable power cord
supports changing input
power requirements
MPX PEM fixed
capacity module
for 3-phase
applications
Power Entry Module (MPX PEM)
available in variable capacity and
fixed capacity versions
SN Sensors: consolidate
environmental monitoring of
temperature and humidity with
rack level power
BDM™ local display module,
advanced diagnostics, displayed
at a location that is convenient
for the customer. Features
include specific information
on alarms, specific labels
for outlets
Communications Module
(RPC2) mounts in the
Power Entry Module and
provides upgradable network
communications, sensor and
local display interface
5
MPH2™—Managed Rack PDU:
Advanced Monitoring And Control Support
MPH2 is the most intelligent, high-availability line of managed rack PDUs. It offers remote monitoring and
control capabilities as well as environmental input options, with multiple power input selections and
output configurations.
It is available in the following four versions:
Outlet Level Metered and Switched
Outlet Level Metered
Rack PDU Metered and Outlet Switched
Rack PDU Metered
MPH2 Benefits
Monitors electrical and environmental parameters with set
threshold and alarm tools
Controls and manages individual receptacles and/or
groups of loads and devices
Allows you to predict failing conditions before they
occur and proactively manage connected equipment for
maximum uptime
Energy and power metering to maximize the data center
power and cooling infrastructure
Lowest power consumption of all switched rack PDU
designs ensures lower operating costs for datacenter
Up to four MPH2 rack PDUs may be interconnected as a
Rack PDU Array™, consolidating user IP connections and
device monitoring.
Designed for Critical Environments
Industry leading operating temperature
6
—up to 60˚C / 140˚F to support hot Internal
rack environments
Bi-stable relays ensure basic power distribution in the
event that intelligence is compromised
Accurate power metering of +/-1% voltage & current
for assured oversight
Energy and power metering down to the
individual receptacle
Comprehensive alarming including notification of
overloaded branch circuits
Environmental sensing with threshold and
alarm set-points
Notification on the loss or removal of individual rack
equipment loads
MPH2 Savings for a Typical Data Center
Typical 24 Outlet
Rack PDU
MPH2
Rack PDU power consumption
(Watts)
20
5
Rack PDU annual energy
consumption (kWh)
—24x7x365
176
44
Overall contribution
to datacenter energy
consumption (kWh)*
333
83
Cost of energy consumption
(based on average cost of
10¢/kWh)
$33
$8
Annual savings per pdu
with MPH2
Annual savings per rack
with MPH2
Annual savings within the
datacenter with MPH2
$25
$50
$5,000
Based on a a comparison of switched rack PDU models for a typical
100 rack data center with a PUE of 1.9.
* per Energy Logic calculations
Click to play MPH2 animation
Communications
Module (RPC2™):
Provides upgradable
network communications,
sensor and local display
interface
BDM™ local display module:
Advanced diagnostics, displayed
at a location that is convenient
for the customer. Features
include specific information on
alarms, specific labels
for outlets
Locking outlets and locking
power cord: Prevents accidental
unplugging of IT devices
SN Sensors: consolidate
environmental monitoring of
temperature and humidity with
rack level power
Onboard display: Provides
easy access to vital information
at the rack
Slim profile breakers:
100% rated hydraulic
magnetic slim profile.
CB’s provide reliable
resettable branch circuit
protection without
nuisance tripping
Flexible power cord entry:
Simplifies installation of higher
amperage units
Corded and hardwired options:
provide flexibility of wiring to both overhead
and raised floor power distribution
7
Remote communications screen captures
Web UI
Seamless DCIM Manageability
and Integration
CLI
MPH2™ and MPX™ intelligent rack PDUs can be managed both locally and remotely. Metering of all electrical information down to the outlet,
phase, bank or rack PDU level as well as integration with environmental sensors makes these rack PDUs the backbone of rack level power
consumption and environmental information. Support for all major industry-standard management, authentication and encryption standards
and protocols ensure that these products seamlessly fit into any existing network and security architecture.
Flexible Local & Remote Management
The MPH2 standard onboard display provides all pertinent
information required at the rack. The optional BDM local display is
available for MPH2 or MPX, and provides flexibility in location of the
display for most convenient visibility.
Remote communications at a rack PDU level is enabled by
the modular, hot swappable RPC2™ card, providing seamless
upgradeability and serviceability. RPC2 enables:
Support up to 4 PDUs within a Rack PDU Array™: Minimizes
IP addresses
Support up to 10 environmental sensor probes: Consolidated
rack level power and environmental monitoring
Support for Web UI, CLI, SSH and Telnet: Provides Windows,
Linux and network administrators their preferred way to interact
with the rack PDU
Support for all major remote authentication & encryption
protocols: Ensures seamless integration into any corporate
security architecture
SNMP v1, v2 and v3 support: Ensures secure communications
through network management systems
IPv4 and IPv6 support: Ensures continued IP support for
rack PDUs
Embedded data log: Enables equipment or rack level baseline
power consumption study
Embedded event log: Easier troubleshooting and auditing
Remote monitoring interface capabilities include:
Snapshot of all electrical parameters at outlet, branch,
phase and aggregate level
Snapshot of environmental sensor readings and status
Threshold configuration, alarm creation and notifications
Power control of individual or group of outlets
Status information and configuration of all outlets
Network management settings
Centralized Management of all rack PDUs within a datacenter is
provided by Avocent Rack Power Manager
Centralized power consumption and environmental reports at
all levels within datacenter
Centralized power control of individual or group of outlets
Mass configuration capabilities
Centralized authorization, authentication and auditing of all rack
PDUs and pertinent data
Web User Interface
Command Line Interface
8
Avocent® Rack Power Manager
Leveraging Your Rack PDU Investment
MPX™ and MPH2™ rack PDUs fully integrate into Emerson Network Power’s industry-leading KVM, serial console and infrastructure
management systems. Plus they integrate rack level power and environmental monitoring information from the rack PDUs with higher level
data center management software provided by Emerson or third parties. By making the information available through these intelligent rack
PDUs easily consumable, Emerson Network Power ensures that customers invest in a comprehensive, easy to use power distribution and
management solution.
Integration with Avocent® Advanced Console Server,
MergePoint™ Unity KVM Switches and Universal
Management Gateway appliances ensures:
Out of band management path for rack PDUs
Rack PDUs are a part of consolidated rack level access and
control solution
Minimize the number of IP addresses required for
rack PDU management
Integration with Avocent DSView4™ software ensures:
Rack PDUs are a part of consolidated datacenter level access
and control solution
Easy association of IT equipment with the rack PDU outlets
they are connected to
Rack PDUs are a part of consolidated authentication,
authorization and audit solution for datacenters
Integration with Liebert® Nform™ and Liebert SiteScan® ensures:
Rack PDUs are a part of consolidated facilities level monitoring
solution for datacenters
Real-time monitoring and control of virtually any piece of critical
support equipment
Data analysis and trend reporting
Event management
Integration with the Trellis™ platform ensures that rack PDUs are a part
of a comprehensive DCIM solution that includes
Inventory Management of all IT and facilities assets
Monitoring of all facility critical devices and service
processor-enabled IT devices
Capacity & Change Management
Energy Consumption Management
Power System Management
Leveraging
Leveragingyour
YourRack
RackPDU
PDUInvestment
Investment
DCIM
Out of band access
and control solutions
Avocent
Advanced
Console Server
Avocent Universal
Management
Gateway
Avocent
MergePoint Unity
Avocent DS View 4
RPC2™
Communications
Module
Trellis
Critical Equipment
Monitoring Solutions
Liebert Nform
Liebert SiteScan
3rd party apps
(SNMP)
9
DI-STRIP®: Most robust and comprehensive line of
basic rack PDUs in easy to use configurations.
Basic Rack PDUs are the right answer for data
center users selecting robust, economical and
flexible rack power solutions.
DI-STRIP rack PDUs meet a broad range of power
distribution requirements for IT and other
applications. Designed especially to handle the
growing number of electronic components that can
be housed within network cabinets and server racks,
the space saving product line is available in a range
of configurations.
Flexibility with multiple configurations and input
power options
Critical rack space operating temperature—up to 55˚C /
131˚F to support hot Internal rack environments
Simple and quick installation on the rack’s extrusion requires
minimal space
Available in vertical zero U
and rackmount form factors
Input is single or three
phase power via single
plug connection
Slim form factor allows
easy installation
10
Flexibility to meet
a broad range of
requirements
MPX™
MPH2™
DI-STRIP®
Preinstalled Toolless brackets
Universal Mounting bracket
Ability to ship rack PDU preinstalled in Emerson Racks
Mounting
Input Power Options
North America
100 - 120V 1-ph 20A/30A
200 - 240V 1-ph 20/30A
200 - 240V 3-ph 20/30/50/60A
208/120V 3-ph 20/30A
415V/240V 3-ph 20A/30A
100 - 120V 1-ph 15/20/30A
200 - 240V 1-ph 20A/30A
Input Power Options International
230V 1-ph 16A/32A
230/400V 3-ph 16A/32A/63A
230V 1-ph 16A/32A
230/400V 3-ph 16A/32A
10 ft. pluggable power cord
10 ft. pluggable power cord
or Hardwired
Max. Capacity North America
17.2 kW
17.2 kW
4.9 kW
Max. Capacity International
27.7 kW
22.2 kW
22.2 kW
NEMA 5-20; IEC 320C13;
IEC 320 C19; Schuko;
French UTE; Schuko; Switzerland
CH SEV 1011; GST 18
NEMA 5-20; IEC 320C13
IEC 320 C19
Locking capability on all outlets
NEMA 5-15; NEMA 5-20; IEC
320C13; IEC 320 C19; French
UTE; Schuko; Switzerland CH SEV
1011; GST 18
Basic BRM's: 42
Rack PDU Metered BRM's: 36
Outlet Metered &
Switched BRM's: 36
Strip Metered: 42
Outlet Metered and / or
Switched: 24
Max. 48
0°C to 55°C
(32°F to 131°F)
0°C to 60°C
(32°F to 140°F)
0°C to 45/55°C
(32°F to 113/131°F)
-25°C to 85°C (-13°F to 185°F)
-25°C to 85°C (-13°F to 185°F)
-20°C to - 85°C (-4°F to -121°F)
5% to 95%
5% to 95%
5% to 95%
Input Wiring Options
Outlet Options
Maximum Outlets
Maximum Operating Temp. Range
Storage Temperature Range
Relative Humidity
Overcurrent Protection
Software Electronic Overcurrent Protection
100% Rated 20A Branch Overcurrent Protection - Hydraulic Magnetic
Circuit Breakers
8/10 ft. pluggable power cord
Hydraulic Magnetic
Circuit Breakers
Idle Power Consumption
3 W – 22 W
3W - 5W
N/A
0U Units Width x Depth
75 mm x 104 mm
(2.95 in x 4.09 in)
56 mm x 50 mm
(2.2 in x 1.96 in)
45 mm x 46 mm
(1.77in x 1.81in) and others
1035 mm / 1880 mm
(40.7 in / 74 in)
916 mm / 1004 mm /
1737 mm/ 1827 mm
(36 in) / (39.5 in) / (68.4 in) / (72 in)
333 mm - 1833 mm
(13 in - 72 in)
0U units Length
Standard Warranty
Agency Approvals
Metering Levels
Parameters Measured
2 years; Extended Warranties Available
UL, CSA, CE, RoHS, REACH, FCC Class A, CB, WEEE, ISTA
Aggregate, Branch, Phase, Outlet
Volts, Current, kW, KVA, kWh, Power Factor, Crest Factor, Frequency
Metering Accuracy
Switching Capability
Modularity
Local Management
+/-1%
On, Off, Recycle, Lock, Unlock, Outlet Grouping Capability
Power Entry Module
Branch Receptacle Module
RPC2™ communications module
RPC2 communications module
Optional Local Display
Onboard Display,
Optional Local Display
Remote Management
Onboard Web Interface; CLI; SNMP; SSH; Telnet
Integration with Avocent® ACS, Avocent Universal Management Gateway
& Avocent MergePoint™ Unity Integration with DSView®, Rack Power
Manager, Nform™ and the Trellis™ platform
SNMP version support
v1, v2 and v3
Authentication
UL, CSA, CE, BG, CB, RoHS,
REACH, WEEE
Local
Remote: Active Directory, LDAP, TACACS, Radius, Kerberos
Encryption
MD5, AES, DES
All systems are RoHS compliant.
SO WHAT SHOULD YOU DO NEXT?
Emerson Network Power’s more than 50 years of experience in data center infrastructure design,
deployment and application ensures your next rack PDU purchase will keep you up and running
regardless of changes to your data center environment.
Go to our PDU quick form to request more information.
11
Ensuring The High Availability Of
Mission-Critical Data And Applications.
Emerson Network Power
Global Headquarters
1050 Dearborn Drive
P.O. Box 29186
Columbus, Ohio 43229
800 877 9222 Phone (U.S. & Canada Only)
614 888 0246 Phone (Outside U.S.)
[email protected]
Emerson Network Power
Caribbean and Latin America
Office – United States of America
+1-954-984-3452 Phone
[email protected]
Emerson Network Power
Canada
3580 Laird Rd Unit 1
Mississauga
Ontario L5L 5Z7
+1 905 569 8282
[email protected]
EmersonNetworkPower.com
While every precaution has been taken to ensure accuracy and completeness in this literature, Liebert Corporation assumes no responsibility, and disclaims all liability for damages resulting from use of this information or for any
errors or omissions. © 2013 Liebert Corporation. All rights reserved throughout the world. Specifications subject to change without notice. All names referred to are trademarks or registered trademarks of their respective owners.
® Liebert is a registered trademark of the Liebert Corporation. Avocent is a trademark of Avocent Corporation.
Emerson, Consider it Solved, Emerson Network Power and the Emerson Network Power logo are trademarks and service marks of Emerson Electric Co. ©2013 Emerson Electric Co.
SL-20830 (R12/13)
Printed in USA
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement