Aiphone SBX-DVF-P Install Manual

Stainless Steel Surface Mount Box

For units with embedded card readers and access keypads

- INSTRUCTIONS -

The SBX-DVF-P is an 18-Gauge stainless steel enclosure designed for surface mounting the following

Aiphone Video Door Station models:

Units with HID ProxPoint Plus Readers: AX-DVF-P, JF-DVF-HID, JK-DVF-HID

Units with embedded access keypad: JK-DVF-AC

5-15/1

6"

2-1

3/1

6"

CONTENTS:

- SBX-DVF-P Surface mount box

- 4 Speed nuts

MOUNTING INSTRUCTIONS:

Mounting

Tabs

1. The SBX-DVF-P is designed to mount to a 1- or 2-gang box, ring, or to any flat surface.

2. Pass cable through the center opening.

3. Secure mounting box to wall.

4. Connect the proper cable to the video door station.

(Refer to the system’s installation manual.)

5. Connect supplied speed nuts to mounting tabs. (4 total)

6. Attach video door station to mounting box using supplied tamper proof screws and tool. (Tamper proof screws and tool are supplied with the door station.)

1-

15

/1

6"

Video Door station with

Prox Reader

SPECIFICATIONS:

Mounting:

Material:

Color:

1- or 2-gang box, or surface mount directly to wall surface

18-Gauge Stainless Steel

Polished Stainless Steel

Dimensions (HxWxD): 11-3/4” x 5-15/16” x 2-13/16" (top); 1-15/16” (bottom)

Interior Depth: 1-5/8"

Aiphone Corporation www.aiphone.com

[email protected]

(800) 692-0200

SBX-DVF-P Instr.

0416JD