Product overview - Pro
Product overview
Hifi-Centre and Loudspeaker - Box Design-Line
Juke Box
Juke Box Esprit
Speaker Box 5
Record player - Essential-Line
Essential
Essential / Phono USB
Record player - Debut-Line
Debut III
Debut III/ Phono USB
Debut III Esprit
1 Xpression III
1 Xpression III Comfort
1 Xpression Classic
2 Xperience Classic
2 Xperience Acryl
6 PerspeX
Xtension
RPM 6.1 SB
RPM 9.1 Acryl
RPM 9.2 Evolution
Record player - Classic-Line
Record player - RPM-Line
RPM 1.3 Genie
RPM 5.1
RPM 10.1 Evolution
Models with an end-of-side switch-off: Pro-Ject 1 Xpression III Comfort
Models with an electronic speed change between 33 and 45 r.p.m.: Pro-Ject 1 Xpression III Comfort, Pro-Ject RPM 6.1 SB and Xtension
78 r.p.m. as a standard: Pro-Ject 1 Xpression III Comfort, Pro-Ject RPM 6.1 SB, and Xtension
78 r.p.m. optional with all models except: Pro-Ject 2 Xperience Classic, Pro-Ject 2 Xperience Acryl, Pro-Ject 6 PerspeX,
Pro-Ject RPM 9.1 Acryl, Pro-Ject RPM 9.2 Evolution and Pro-Ject RPM 10.1 Evolution
Models equipped with an internal MM phono stage: Pro-Ject Essential /Phono USB
and Pro-Ject Debut III/ Phono USB
Transparent plastic dust cover supplied with all models except Pro-Ject RPM 1.3 Genie, Pro-Ject RPM 5.1,
Pro-Ject RPM 6.1 SB, Pro-Ject RPM 9.1 Acryl, Pro-Ject RPM 9.2 Evolution and Pro-Ject RPM 10.1 Evolution
Dust cover optional: Pro-Ject RPM 9.1 Acryl and Pro-Ject RPM 9.2 Evolution
Universal dust cover Pro-Ject Cover it optional: Pro-Ject 1.3 Genie, Pro-Ject RPM 5.1, Pro-Ject RPM 6.1 SB,
Pro-Ject RPM 9.1 Acryl, Pro-Ject RPM 9.2 Evolution and Pro-Ject RPM 10.1 Evolution
Technical specifications
Dimensions W x H x D
Juke Box
Juke Box Esprit
Fitted cartridge
Ortofon OM 5E
Ortofon Alpha
8
8
Build in amplifier
8
8
Built in phono pre-amplifier (MM)
A/D converter with USB output
–
–
A
A
Nominal speeds
33 / 45 / 78
33 / 45 / 78
8
8
Dust cover
RCA phono sockets
8 3 Line level inputs
8 3 Line level inputs
8
Input at the front (3,5mm co-axial jack)
–
8
Record out
–
Feet / damping material
PVC / rubber
PVC / rubber
Tonearm
Pro-Ject 8.6
Pro-Ject 8.6
Armtube / headshell made of
aluminium / aluminium aluminium / aluminium
Eff. tonearm length / eff. tonearm mass 8,6“ (218,5mm) / 9,5 g 8,6“ (218,5mm) / 9,5 g
Overhang
18,5 mm
18,5 mm
Downforce range
10 - 35 mN
10 - 35 mN
Speed variance
±0,9 %
±0,9 %
Wow and flutter
±0,15%
±0,15%
Signal to noise
-55dB
-55dB
Platter – weight / diameter
1,3 kg / 280mm
0,9kg / 300mm
Power consumption
65W
65W
Dimensions (dust cover open)
415 x 365 x 405mm
415 x 365 x 405mm
Dimensions (dust cover closed)
415 x 118 x 350mm
415 x 118 x 350mm
Weight
6,5kg
6,1kg
A Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE II), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
2
Technical specifications
Dimensions W x H x D
Fitted cartridge
Build in amplifier
Built in phono pre-amplifier (MM)
A/D converter with USB output
Nominal speeds
Dust cover
RCA phono sockets
Feet / damping material
Tonearm
Armtube / headshell made of
Eff. tonearm length / eff. tonearm mass
Overhang
Downforce range
Speed variance
Wow and flutter
Signal to noise
Platter – weight / diameter
Power consumption
Dimensions (dust cover open)
Dimensions (dust cover closed)
Weight
Essential
Essential /Phono USB
Debut III
Debut III/Phono USB
Debut III Esprit
Ortofon OMB 3E
–
–
–
D
33 / 45
8
Ortofon OMB 3E
–
–
8
Ortofon OM 5E
–
–
–
A
33 / 45 / 78
8
Ortofon OM 5E
8
8
Ortofon Alpha
–
–
–
A
33 / 45 / 78
8
–
PVC / rubber
Pro-Ject 8.6 UniPivot
aluminium / aluminium
8,6“ (218,5mm) / 8,9
18,5 mm
10 - 30 mN
±1,5 %
±0,25%
-65dB
0,8kg / 300mm
2W
415 x 360 x 390mm
415 x 110 x 335mm
3,7kg
–
PVC / rubber
Pro-Ject 8.6 UniPivot
aluminium / aluminium
8,6“ (218,5mm) / 8,9
18,5 mm
10 - 30 mN
±1,5 %
±0,25%
-65dB
0,8kg / 300mm
2W
415 x 360 x 390mm
415 x 110 x 335mm
3,9kg
D
33 / 45
8
A
–
33 / 45 / 78
8
8
–
–
PVC / rubber
PVC / rubber
PVC / rubber
Pro-Ject 8.6
Pro-Ject 8.6
Pro-Ject 8.6
aluminium / aluminium aluminium / aluminium aluminium / aluminium
8,6“ (218,5mm) / 9,5 g 8,6“ (218,5mm) / 9,5 g 8,6“ (218,5mm) / 9,5 g
18,5 mm
18,5 mm
18,5 mm
10 - 30 mN
10 - 30 mN
10 - 30 mN
±0,8 %
±0,8 %
±0,8 %
±0,12%
±0,12%
±0,12%
-65dB
-65dB
-65dB
1,3 kg / 280mm
1,3 kg / 280mm
0,9kg / 300mm
2W
2W
2W
415 x 365 x 405mm
415 x 365 x 405mm
415 x 365 x 405mm
415 x 118 x 320mm
415 x 118 x 320mm
415 x 118 x 320mm
5,5kg
6kg
5,1kg
A Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE II), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.
D Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
3
Technical specifications
Dimensions W x H x D
1 Xpression III
1 Xpression III Comfort
1 Xpression Classic
6 PerspeX
optional Ortofon 2M Red
–
A
33 / 45 / 78
–
–
8
Ortofon 2M Red
–
C
33 / 45 / 78
8
8
8
optional Ortofon 2M Red
–
A
33 / 45 / 78
8
8
8
–
8
Fitted cartridge
Magnet supported sub-chassis
Nominal speeds
Electronic speed change
End-of-side switch-off
Dust cover
Motor in a separate housing
Record clamp / record puck
RCA phono sockets
Feet / damping material
Tonearm
Armtube / headshell made of
Eff. tonearm length / eff. tonearm mass
Overhang
Supplied counterweights for cartridge weight
–
–
8
–
–
8
–
–
8
aluminium cones / rubber
Pro-Ject 8.6c
carbon-fibre / aluminium
8,6“ (218,5mm) / 8,7g
18,5 mm
7 - 12g
aluminium cones / rubber
Pro-Ject 8.6c
carbon-fibre / aluminium
8,6“ (218,5mm) / 8,7g
18,5 mm
7 - 12g
aluminium cones / rubber
Pro-Ject 8.6c
carbon-fibre / aluminium
8,6“ (218,5mm) / 8,7g
18,5 mm
7 - 12g
Optional counterweights for cartridge weight
Downforce range
Speed variance
Wow and flutter
Signal to noise
Platter – weight / diameter
Power consumption
Dimensions (dust cover open)
Dimensions (dust cover closed)
Weight
4 - 7g
10 - 30 mN
±0,5 %
±0,1%
-70 dB
0,9kg / 300mm
2W
415 x 370 x 405mm
415 x 118 x 320mm
5kg
4 - 7g
10 - 30 mN
±0,5 %
±0,1%
-70 dB
0,9kg / 300mm
2W
415 x 370 x 405mm
415 x 118 x 320mm
5kg
4 - 7g
10 - 30 mN
±0,5 %
±0,1%
-70 dB
1,65kg / 300mm
10W
415 x 370 x 405mm
415 x 118 x 320mm
5,5kg
D
33 / 45
–
–
8
8
record clamp
8
aluminium cones / Sorbothane
Pro-Ject 9cc Evolution
carbon-fibre / carbon-fibre
9“ (230mm) / 8g
18 mm
5 - 7,5g, 7 - 10g
9 - 11g, 10 - 14g
–
15 - 30 mN
±0,5 %
±0,06 %
-73 dB
2kg / 300mm
2W
460 x 420 x 465mm
460 x 160 x 365mm
10,5
A Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE II), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.
C Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.
D Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
4
Technical specifications
Dimensions W x H x D
Fitted cartridge
Nominal speeds
Electronic speed change
Dust cover
Record clamp / record puck
Inverted main bearing with ceramic thrust-pad
Magnet supported main bearing
Central metal block damps main bearing
RCA phono sockets
5-pole standard tonearm socket
Feet / damping material
Magnet supported feet
Tonearm
Armtube / headshell made of
Eff. tonearm length / eff. tonearm mass
Overhang
Supplied counterweights for cartridge weight
Optional counterweights for cartridge weight
Downforce range
Speed variance
Wow and flutter
Signal to noise
Platter – weight / diameter
Power consumption
Dimensions (dust cover open)
Dimensions (dust cover closed)
Weight
2 Xperience Classic
2 Xperience Acryl
optional Ortofon 2M Red
optional Ortofon 2M Red
D
D
33 / 45
33 / 45
–
–
8
8
record clamp
record clamp
–
–
–
–
–
–
8
8
–
–
aluminium cones / Sorbothane aluminium cones / Sorbothane
–
–
Pro-Ject 9cc
Pro-Ject 9cc
carbon-fibre / carbon-fibre
carbon-fibre / carbon-fibre
9“ (230mm) / 8,5g
9“ (230mm) / 8,5g
18 mm
18 mm
6 - 10g
6 - 10g
11 - 15g, 8 - 11g, 5 - 8g
11 - 15g, 8 - 11g, 5 - 8g
10 - 30 mN
10 - 30 mN
±0,5 %
±0,5 %
±0,08 %
±0,08 %
-70 dB
-70 dB
2,0 kg / 300mm
2,0 kg / 300mm
10W
2W
460 x 417 x 460mm
460 x 390 x 460mm
460 x 160 x 360mm
460 x 133 x 360mm
7,7kg
7,6kg
Xtension / Pro-Ject
Xtension / Ortofon
–
33 / 45 / 78
8
8
record puck
8
8
8
–
8
aluminium
8
Pro-Ject 12cc Evolution
Pro-Ject 9cc Evolution
without tonearm
–
33 / 45 / 78
8
8
record puck
8
8
8
–
8
aluminium
8
Ortofon AS-212S
Ortofon AS-309S
Ortofon RS-212D
Ortofon RS-309D
without tonearm
±0,09%
±0,01%
-73 dB
5,7 kg / 300mm
2W
550 x 550 x 560mm
550 x 250 x 450mm
20kg
±0,09%
±0,01%
-73 dB
5,7 kg / 300mm
2W
550 x 550 x 560mm
550 x 250 x 450mm
20kg
C
C
C Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.
D Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
5
Technical specifications
Dimensions W x H x D
Fitted cartridge
Nominal speeds
Electronic speed change
Dust cover
Record clamp / record puck
Inverted main bearing with ceramic thrust-pad
Central metal block damps main bearing
RCA phono sockets
Feet / damping material
Tonearm
Armtube / headshell made of
Eff. tonearm length / eff. tonearm mass
Overhang
Supplied counterweights for cartridge weight
Optional counterweights for cartridge weight
Downforce range
Speed variance
Wow and flutter
Signal to noise
Platter – weight / diameter
Power consumption
Dimensions (dust cover open)
Weight
RPM 1.3 Genie
RPM 5.1
RPM 6.1 SB
Ortofon OM 3E or
Ortofon 2M Red
D
33 / 45
–
–
–
8/–
–
8
optional Ortofon 2M Red
–
33 / 45 / 78
– / 8
Cover it optional
record clamp
–
8
8
Cover it optional
record puck
8/8
8
8
ABS plastic
Pro-Ject 8.6s
aluminium / aluminium
8,6“ (218,5mm) / 8,5g
19 mm
4 - 9g
–
15 - 30 mN
±0,8 %
±0,15%
-70 dB
1,6kg / 300mm
2W
* 380 x 115 x 350mm
3,3kg
aluminium cones / rubber
Pro-Ject 9cc
carbon-fibre / carbon-fibre
9“ (230mm) / 8,5g
18 mm
6 - 10g
11 - 15g, 5 - 8g, 3 - 6g
10 - 30 mN
±0,5 %
±0,08 %
-70 dB
1,75 kg / 300mm
2W
* 371 x 145 x 300mm
6,5kg
aluminium cones / Sorbothane
Pro-Ject 9c
carbon-fibre / aluminium
9“ (230mm) / 9,5g
18 mm
6 - 10g
10 - 15g, 9 - 11g, 4 - 6g
10 - 30 mN
±0,5 %
±0,08 %
-70 dB
3,5kg / 330mm
6W
* 385 x 170 x 330mm
8kg
A
C
33 / 45 / 78
8
A Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
Using the Pro-Ject Speed Box II (Pro-Ject Speed Box SE II), 78 r.p.m. is available after fitting a special pulley, which may be purchased as an optional extra.
C Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.
D Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
* Without dust cover. Dust cover Pro-Ject Cover it optional. Dimensions Cover it 1: 525 x 290 x 425mm. Dimensions Cover it 2: 460 x 225 x 365mm
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
6
Technical specifications
RPM 9.1Acryl
RPM 9.2 Evolution
RPM 10.1 Evolution
Fitted cartridge
Nominal speeds
Electronic speed change
Dust cover
Motor in a separate housing
Record clamp / record puck
Inverted main bearing with ceramic thrust-pad
Magnet supported main bearing
Central metal block damps main bearing
Granulate filled plinth
Equipment base with magnet supported feet
RCA phono sockets
Feet / damping material
Tonearm
Armtube / headshell made of
Eff. tonearm length / eff. tonearm mass
Overhang
Supplied counterweights for cartridge weight
–
33 / 45
–
Cover it optional
8
record puck
8
–
8
8
–
8
aluminium cones / Sorbothane
Pro-Ject 9cc
carbon-fibre / carbon-fibre
9“ (230mm) / 8,5g
18 mm
6 - 10g
Optional counterweights for cartridge weight
Downforce range
Speed variance
Wow and flutter
Signal to noise
Platter – weight / diameter
Power consumption
Dimensions (dust cover open)
Weight
11 - 15g, 8 - 11g, 5 - 8g
10 - 30 mN
±0,5 %
±0,06 %
-73 dB
3,5kg / 300mm
2W
* 440 x 180 x 325mm
10,5kg + 2kg Motor
–
33 / 45
–
Cover it optional
8
record puck
8
–
8
–
–
8
Magnet supported feet
Pro-Ject 9cc Evolution
carbon-fibre / carbon-fibre
9“ (230mm) / 8g
18 mm
5 - 7,5g, 7 - 10g,
9 - 11g, 10 - 14g
–
10 - 35 mN
±0,5 %
±0,06 %
-73 dB
3,5kg / 300mm
2W
* 440 x 180 x 325mm
10,5kg + 2kg Motor
–
33 / 45
–
Cover it optional
8
record puck
8
8
8
8
8
8
aluminium cones / Sorbothane
Pro-Ject 10cc Evolution
carbon-fibre / carbon-fibre
10“ (254mm) / 8,5g
16 mm
4 - 6g, 5 - 8g,
6 - 10g, 8 - 14g
15 - 20g, 17 - 22g
10 - 35 mN
± 0 , 5%
± 0 , 01 %
-73 dB
5,4kg / 300mm
2W
* 480 x 210 x 330mm
14,5kg + 2kg Motor
Dimensions W x H x D
D
D
D
D Electronic speed change between 33 and 45 r.p.m. when the optional Pro-Ject Speed Box II (Pro-Ject Speed Box SE II) is used.
* Without dust cover. Dust cover Pro-Ject Cover it optional. Dimensions Cover it 1: 525 x 290 x 425mm. Dimensions Cover it 2: 460 x 225 x 365mm
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
7
Technical specifications
1”= 2,54cm
Headshell 0,5” standard:
Mounting distance arm base
Armtube made of
Headshell made of
Eff. tonearm length
Eff. tonearm mass
Overhang
Supplied counterweights for
cartridge weight
Optional counterweights for
cartridge weight
Downforce range
Weight (without counterweight)
Pro-Ject 9
Pro-Ject 9c
Pro-Ject 9cc
Pro-Ject 9cc
Evolution
Pro-Ject 10cc
Pro-Ject 10cc
Evolution
Pro-Ject 12cc
Pro-Ject 12cc
Evolution
8
8
8
8
8
8
8
8
212mm
aluminium
aluminium
9“ (230mm)
11g
18 mm
6 - 14g
------------------2 - 6g
4 - 10g
10 - 16g
10 - 35 mN
250g
212mm
carbon-fibre
aluminium
9“ (230mm)
11g
18 mm
6 - 9g
------------------4 - 6g
9 - 11g
10 - 15g
10 - 35 mN
250g
212mm
carbon-fibre
carbon-fibre
9“ (230mm)
8,5g
18 mm
6 - 10g
------------------3 - 6g
5 - 8g
11 - 15g
10 - 30 mN
250g
212mm
carbon-fibre
carbon-fibre
9“ (230mm)
8g
18 mm
5 - 7,5g
7 - 10g
9 - 11g
10 - 14g
------------------10 - 35 mN
265g
238mm
carbon-fibre
carbon-fibre
10“ (254mm)
9g
16 mm
6 - 9g
------------------2 - 5g
7 - 11g
10 - 15g
10 - 35 mN
254g
238mm
carbon-fibre
carbon-fibre
10“ (254mm)
8,5g
16 mm
4 - 6g
5 - 8g
6 - 10g
8 - 14g
15 - 20g
17 - 22g
------10 - 35 mN
269g
291,6mm
291,6mm
carbon-fibre
carbon-fibre
carbon-fibre
carbon-fibre
12“ (304,8mm) 12“ (304,8mm)
10,5g
10,5g
13,2mm
13,2mm
4 - 6g
4 - 7g
7 - 9g
6 - 9g
------8 - 12g
------10 - 14g
9,5 - 13g
15 - 20g
------16 - 22g
------------10 - 35 mN
10 - 35 mN
257g
271g
All tonearms are available either with flying leads terminated with a 5-pole standard tonearm socket, or with a cable terminated with RCA phono sockets.
9" Tonearms fit record players fitted with mounting boards drilled to the Linn standard geometry.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
8
Product information
Pro-Ject 9cc Evolution
9" precision tonearm with carbon-fibre armtube
The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,
guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical
and horizontal tracing due to the following constructional details:
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted bearing design with four ABEC7 spec ballraces.
Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped
records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Straight armtube reduces toe-in error.
Silicone-damped armlift can be adjusted to suit arm height.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.
Technical specifications
Headshell:
Mounting distance:
Supplied counterweights:
Downforce range:
Effective length:
Effective mass:
Overhang:
Weight:
0,5” (12,7mm) standard
212mm (platter
tonearm base, Linn standard mount)
suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g
10 - 35mN
9” (230mm)
8g
18mm
265g (without counterweight)
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
9
Product information
Pro-Ject 10cc Evolution
10" precision tonearm with carbon-fibre armtube
The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,
guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical
and horizontal tracing due to the following constructional details:
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted bearing design with four ABEC7 spec ballraces.
Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped
records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Straight armtube reduces toe-in error.
Silicone-damped armlift can be adjusted to suit arm height.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.
Technical specifications
Headshell:
Mounting distance:
Supplied counterweights:
Optional counterweights:
Downforce range:
Effective length:
Effective mass:
Overhang:
Weight:
0,5” (12,7mm) standard
238mm (platter
tonearm base)
suitable for cartridges weighing between 4 - 6g, 5 - 8g, 6 - 10g or 8 - 14g
suitable for cartridges weighing between 15 - 20g or 17 - 22g
10 - 35mN
10” (254mm)
8,5g
16mm
269g (without counterweight)
The manufacturer reserves the right to alter the technical specifications without notice.
10
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject 12cc Evolution
12" precision tonearm with carbon-fibre armtube
The tonearm's design efficiently leads parasitic vibrations away from the cartridge into the mounting board,
guarantees the precise tracing of the record groove by the needle and also facilitates fine adjustment of vertical
and horizontal tracing due to the following constructional details:
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted bearing design with four ABEC7 spec ballraces.
Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing warped
records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Straight armtube reduces toe-in error.
Silicone-damped armlift can be adjusted to suit arm height.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Available with 5-pole standard socket, flying leads or terminal with phono sockets and earth screw.
Technical specifications
Headshell:
Mounting distance:
Supplied counterweights:
Optional counterweights:
Downforce range:
Effective length:
Effective mass:
Overhang:
Weight:
0,5” (12,7mm) standard
291,6mm (platter
tonearm base)
suitable for cartridges weighing between 4 - 7g, 6 - 9g, 8 - 12g or 10 - 14g
suitable for cartridges weighing between 15 - 20g or 16 - 22g
10 - 35mN
12” (304,8mm)
10,5g
13,2mm
271g (without counterweight)
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
11
Product information
Pro-Ject Align it
Cartridge alignment tool
Tool for cartridge alignment and adjustment
Special slip-proof tool for defining the turning centre of many Pro-Ject tonearms
Adaptable to accommodate differing tonearm lengths
Suitable for other manufacturers’ tonearms
Suitable for tonearms between 8” (203mm) and 12“(305mm) effective length
The manufacturer reserves the right to alter the technical specifications without notice.
12
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Measure it II
Electronic stylus balance
Case made of aluminium
4 digit LCD-Display with backlight
Capacity 0 - 5g
Variance ±0,002g
Auto calibration function
Auto off after 60 seconds
Batteries supplied (two AAA cells)
Dimensions (W x H x D) 122 x 27 x 55mm
Weight 170g
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
13
Product information
Pro-Ject Ground it deluxe 1, 2 & 3
Equipment bases
Dark grey piano lacquer finish
Filled with granulate for universal damping
Height-adjustable spikes. Three or four spikes may be fitted according to taste/application.
Ground it deluxe 3. Four height-adjustable, magnet supported feet
Dimensions Ground it deluxe 1 (W x H x D):
500 x 65 x 400mm (height incl. spikes). Without spikes 45mm
Dimensions Ground it deluxe 2 (W x H x D):
435 x 65 x 340mm (height incl. spikes). Without spikes 45mm
Dimensions Ground it deluxe 3 (W x H x D):
435 x 80 x 340mm (height incl. feet)
Weight Ground it deluxe 1:
11,6kg
Weight Ground it deluxe 2:
8,5kg
Weight Ground it deluxe 3:
13,5kg
Pro-Ject Cover it 1 & 2
Universal dust cover
Outside dimensions Cover it 1 (W x H x D):
Inside dimensions Cover it 1 (W x H x D):
Weight Cover it 1:
Outside dimensions Cover it 2 (W x H x D):
Inside dimensions Cover it 2 (W x H x D):
Weight Cover it 2:
525 x 290 x 425mm
515 x 285 x 415mm
4,3kg
460 x 225 x 365mm
450 x 220 x 355mm
2,9kg
The manufacturer reserves the right to alter the technical specifications without notice.
Picture: the Pro-Ject Ground it deluxe 2 supporting a Pro-Ject RPM 9.1 (not included).
The Pro-Ject RPM 10.1 Evolution is supplied complete with a Ground it deluxe 3.
14
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Wallmount it
Wall mount equipment racks
Wallmount it 1
Welded steel frame construction with
four height-adjustable spikes to level the board.
Veneered wooden board, black finish
Surface area (W x D): 460 x 355mm
Overall dimensions (W x H x D): 460 x 90 x 415mm
Wallmount it 2
Welded steel frame construction with
four height-adjustable spikes to level the board.
Veneered wooden board, black finish
Surface area (W x D): 460 x 355mm
Overall dimensions (W x H x D): 490 x 260 x 455mm
Wallmount it 3
Screwed steel construction with
three height-adjustable spikes to level the board.
Matt black MDF board.
Surface area (W x D): 520 x 450mm
Overall dimensions (W x H x D): 635 x 290 x 455mmd
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
15
Product information
Pro-Ject Connect it - SI line
Electrically shielded with conductors made of pure silver and
RCA phono plugs with locking function - capacity/meter 58pF
The cables are directional. The blue shrinking tube points out the direction of the signal flow.
Model 5P-SI
Interconnect cable with earthing wire,
2x RCA phono plugs +
1x 5-pole standard tonearm socket.
Option.90º angled 5-pol. standard tonearm socket.
Available length: 82 / 123 and 185cm
Model Phono RCA-SI
Interconnect cable with earthing wire,
4x RCA phono plugs.
Available length: 82 / 123 and 185cm
Model RCA-SI
Interconnect cable,
4x RCA phono plugs.
Available length: 20,5 / 41 / 82 / 123 / 185 / 246 and
492cm
The manufacturer reserves the right to alter the technical specifications without notice.
16
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Connect it - CC line
Electrically shielded with conductors made of OFC copper and
an additional layer of carbon fibre - capacity/meter 75pF
The cables are directional. The blue shrinking tube points out the direction of the signal flow.
Model 5P-CC
Interconnect cable with earthing wire,
2x RCA phono plugs +
1x 5-pole standard tonearm socket.
Option.90º angled 5-pol. standard tonearm socket.
Available length: 82 / 123 and 185cm
Model Phono RCA-CC
Interconnect cable with earthing wire,
4x RCA phono plugs.
Available length: 82 / 123 and 185cm
Model RCA-CC
Interconnect cable,
4x RCA phono plugs.
Available length: 20,5 / 41 / 82 / 123 / 185 / 246 and
492cm
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
17
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
18
Pro-Ject Connect it - C line
Electrically shielded with conductors made of OFC copper - capacity/meter 65pF
The cables are directional. The blue shrinking tube points out the direction of the signal flow.
Model 5P-C
Interconnect cable with earthing wire,
2x RCA phono plugs +
1x 5-pole standard tonearm socket.
Option.90º angled 5-pol. standard tonearm socket.
Available length: 82 / 123 and 185cm
Model Phono RCA-C
Interconnect cable with earthing wire,
4x RCA phono plugs.
Available length: 82 / 123 and 185cm
Model RCA-C
Interconnect cable,
4x RCA phono plugs.
Available length: 20,5 / 41 / 82 / 123 / 185 / 246 and
492cm
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Connect it - C line
Electrically shielded with conductors made of OFC copper - capacity/meter 65pF
Model Y-Cable RCA-C (plugs)
Y-Interconnect cable,
1x RCA phono plug +
2x RCA phono plugs.
Available length: 20,5 / 41 and 82cm
Model RCA-35-C
Interconnect cable,
1x 3 pole mini-jack (3,5mm Ø) +
2x RCA phono plugs.
Available length: 20,5 / 41 and 82cm
Pro-Ject Connect it - Speaker cable
conductors made of OFC copper
Single- or Bi-Wiring
Conductor four times 1mm2 Ø
Outer diameter 6mm
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
19
Product information
Juke Box
Hifi-Centre with remote controllable
amplifier and manual turntable with
fitted cartridge Ortofon OM 5E
Chassis available in glossy black, red and white
Bi-Phase PWM-circuit (Pulse Width Modulation). 2 x 20W/30W at 8ohms/4ohms
Pro-Ject Audio digital amplifiers achieve 80% energy efficiency
Three line-level inputs to connect line-level sources such as tuner, TV-set, CD- or MP3-player
Amplifier with remote control for volume and input selection
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Separate, external power supply for the record player an the amplifier avoid potential electro-mechanical
interference.
Dimensions W x H x D: With dust cover closed 415 x 118 x 350mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
20
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Juke Box Esprit
Hifi-Centre with remote controllable
amplifier and manual turntable with
fitted cartridge Ortofon Alpha
Chassis available in glossy black, red and white
Bi-Phase PWM-circuit (Pulse Width Modulation). 2 x 20W/30W at 8ohms/4ohms
Pro-Ject Audio digital amplifiers achieve 80% energy efficiency
Three line-level inputs, on at the front, to connect line-level sources such as tuner, TV-set, CD- or MP3-player
Record output provides an analogue signal for digitalisation with an A/D converter
Amplifier with remote control for volume and input selection
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
The turntable is supplied with Ortofon Alpha MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Separate, external power supply for the record player an the amplifier avoid potential electro-mechanical
interference.
Dimensions W x H x D: With dust cover closed 415 x 118 x 350mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 3mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
21
Product information
Speaker Box 5
2-way speaker
Available in glossy black, red and white finish
Magnetically shielded. Speakers can be placed close to a TV-set
Wallmount brackets included
High frequency driver 25mm Ø soft dome
Bass driver 130mm Ø
Frequency response: 55Hz - 20kHz
Impedance 8 ohms
Sensitivity (1W/1m) 86dB
Recommended amplifier: 10 - 150W RMS
Dimensions W x H x D: 160 x 255 x 210mm. Weight: 4,2kg
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
22
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Produktinformation
Essential
Manual turntable with fitted cartridge
Ortofon OMB 3E
Turntable
Chassis available in red, white and black
A quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a silicon belt.
The particle board plinth stands on three feet which act as shock absorbers.
The resonance-optimised platter is made of particle board and a felt mat.
A chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6 UniPivot
The turntable is supplied with Ortofon OMB 3E MM-cartridge fitted.
The headshell and undamped armtube are fashioned from a single piece.
The uni pivot bearings consist of a hardened steel point bearing and a hardened and polished steel pad.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
The counterweight supplied is suitable for cartridges weighing between 4 - 9g
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
Dimensions W x H x D: With dust cover closed 415 x 112 x 335mm, dust cover open 415 x 365 x 390mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
23
Produktinformation
Essential/Phono USB
Manual turntable with fitted cartridge
Ortofon OMB 3E and
integrated MM phono pre-amplifier with
A/D converter and USB output
Turntable
Chassis available in red, white and black
A quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a silicon belt.
The particle board plinth stands on three feet which act as shock absorbers.
The resonance-optimised platter is made of particle board and a felt mat.
A chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6 UniPivot
The turntable is supplied with Ortofon OMB 3E MM-cartridge fitted.
The headshell and undamped armtube are fashioned from a single piece.
The uni pivot bearings consist of a hardened steel point bearing and a hardened and polished steel pad.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
The counterweight supplied is suitable for cartridges weighing between 4 - 9g
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III / Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 112 x 335mm, dust cover open 415 x 365 x 390mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Digitalisation of analogue signals for recording direct to disk via USB with suitable recording programs
Runs on Windows XP®, Windows Vista®, Windows 7® and Mac OS operating systems
Technical specifications Phono Pre-amplifier - A/D converter
Noise floor:
THD:
Input impedance:
Power consumption:
Gain:
Output voltage typically:
RIAA-equalisation curve accuracy:
USB output:
88dB
0,005%
47kohms/100pF
16V/40mA AC
32dB
160mV/1kHz at 4mV/1kHz
> 0,5dB/20Hz - 20kHz
digital serial data protocol USB 1.1
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
!
24
The unit may only be connected to a line level input.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Debut III
Manual turntable with fitted
cartridge Ortofon OM 5E
Turntable
Chassis available in matt black, glossy black, silver, glossy white, red, blue and green
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
The connection cable has gold-plated plugs and appropriate capacitance and inductance values.
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 4mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
25
Product information
Pro-Ject Debut III/Phono USB
Manual turntable with fitted cartridge
Ortofon OM 5E and
integrated MM phono pre-amplifier with
A/D converter and USB output
Turntable
Chassis available in matt black, glossy black, silver and glossy white
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The platter is a sandwich construction utilising the hub, a sheet-steel platter weighing 1,3Kg and a felt mat.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon OM 5E MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
A supplied 3,5 mm connector can be used to connect your Pro-Ject Debut III / Phono to any line level/auxiliary
input (Computer, Midi System, Mixer etc.).
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Phono Pre-amplifier
Optimal channel separation through dual-mono circuitry
Digitalisation of analogue signals for recording direct to disk via USB with suitable recording programs
Runs on Windows XP®, Windows Vista®, Windows 7® and Mac OS operating systems
Technical specifications Phono Pre-amplifier - A/D converter
Noise floor:
THD:
Input impedance:
Power consumption:
Gain:
Output voltage typically:
RIAA-equalisation curve accuracy:
USB output:
88dB
0,005%
47kohms/100pF
16V/40mA AC
32dB
160mV/1kHz at 4mV/1kHz
> 0,5dB/20Hz - 20kHz
digital serial data protocol USB 1.1
The manufacturer reserves the right to alter the technical specifications without notice.
!
26
The unit may only be connected to a line level input.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Debut III Esprit
Manual turntable with fitted
cartridge Ortofon Alpha
Turntable
Chassis available in matt black, glossy black, silver, glossy white, red, blue and green
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on four feet which act as shock absorbers.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6
The turntable is supplied with Ortofon Alpha MM-cartridge fitted.
Uniform material: the tonearm tube and bearing housing are constructed from aluminium.
The headshell and undamped armtube are fashioned from a single piece.
The inverted horizontal bearings consist of two hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The internal wiring consists of high-grade flexible copper from the headshell right through to the connection cable.
The connection cable has gold-plated plugs and appropriate capacitance and inductance values.
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 3mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
27
Product information
Pro-Ject 1 Xpression III
Manual turntable.
Optional with fitted cartridge
Ortofon 2M Red
Turntable
Chassis piano-lacquered dark grey
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6c
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
Conical carbon-fibre armtube avoids standing wave reflections.
Low mass aluminium headshell securely glued to armtube.
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
The counterweight supplied is suitable for cartridges weighing between 7 - 12g . An alternative counterweight
for cartridges weighing between 4 - 7g is available as an accessory part.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 5,5mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
28
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject 1 Xpression III Comfort
Manual turntable with electronic
speed change, automatic cut-off
and fitted cartridge
Ortofon 2M Red
Turntable
Chassis piano-lacquered dark grey
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub and an acrylic platter.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
Electronic speed change for 33 / 45 r.p.m.. Switching to 78 r.p.m. is done manually.
An opto-electronic switch stops the motor as soon as the cartridge has reached the run-out groove.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6c
The turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
Conical carbon-fibre armtube avoids standing wave reflections.
Low mass aluminium headshell securely glued to armtube.
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
The counterweight supplied is suitable for cartridges weighing between 7 - 12g . An alternative counterweight
for cartridges weighing between 4 - 7g is available as an accessory part.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 5,5mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
29
Product information
Pro-Ject 1 Xpression Classic
Manual turntable.
Optional with fitted cartridge
Ortofon 2M Red
Turntable
Available finishes. Mahogany or olive veneer and piano-lacquered black
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced aluminium
platter and a cork mat (a standard felt mat is supplied also).
The platter's low-tolerance chrome-plated stainless-steel axle runs on a polished ball bearing in a brass
bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6c
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
Conical carbon-fibre armtube avoids standing wave reflections.
Low mass aluminium headshell securely glued to armtube.
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
Flexible counterweight shaft avoids vibration at undesirable frequencies.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
The counterweight supplied is suitable for cartridges weighing between 7 - 12g . An alternative counterweight
for cartridges weighing between 4 - 7g is available as an accessory part.
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 415 x 118 x 320mm, dust cover open 415 x 365 x 405mm.
Cartridge: Output voltage 5,5mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
30
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject 2 Xperience Classic
Manual turntable.
Optional with fitted cartridge
Ortofon 2M Red
Turntable
Available finishes. Mahogany or olive veneer and piano-lacquered black
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The medium density fibre plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered
bronze bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 460 x 160 x 360mm, dust cover open 460 x 417 x 460mm.
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
31
Product information
Pro-Ject 2 Xperience Acryl
Manual turntable.
Optional with fitted cartridge
Ortofon 2M Red
Turntable
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, a fine-balanced medium density
fibre platter weighing 2Kg, a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered
bronze bearing housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 460 x 133 x 360mm, dust cover open 460 x 390 x 460mm.
The manufacturer reserves the right to alter the technical specifications without notice.
32
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject 6 PerspeX
Manual turntable
Turntable
The transparent acrylic plinth stands on three individually height-adjustable Sorbothane®-damped aluminium
cones and carries the motor and the sub-chassis. The sub-chassis, made of Corian, rests on tree magnetic
fields. A supplied spirit level allows easy adjustment of the sub-chassis.
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced medium density fibre
platter weighing 2Kg and a 4mm thick flat-ground layer of vinyl and a screw-down metal record clamp.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: With dust cover closed 460 x 160 x 365mm, dust cover open 460 x 420 x 465mm.
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
33
Product information
Pro-Ject Xtension
Manual turntable with
12" Pro-Ject Evolution tonearm and
build in Pro-Ject Speed Box SE
(Picture shows Xtension/12cc Evolution)
Turntable
Available finishes
Olive
Mahogany
Black gloss
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.
The medium density fibre plinth rests on four individually height-adjustable magnetic field feet. A build in spirit
level allows easy adjustment of the chassis.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced and damped aluminium
platter weighing 5,7kg and a 4mm thick flat-ground layer of vinyl and a brass record puck.
The magnet supported, inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic
bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
External power supply avoids potential electro-mechanical interference.
Tonearms Pro-Ject 12cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted bearing design with four ABEC7 spec ballraces.
Arm bearing housing of solid ring type. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
High quality interconnect cable Pro-Ject Connect it 5P-C (123cm length) included.
Model X tension / 12cc Evolution with static balanced 12" tonearm Pro-Ject 12cc Evolution
Model X tension / without tonearm. Arm board for 9" and 12" tonearms
Dimensions W x H x D: With dust cover closed 550 x 250 x 450mm, dust cover open 550 x 550 x 560mm.
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
34
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject Xtension
Manual turntable with
static or dynamic balanced
9" or 12" Ortofon tonearm and
build in Pro-Ject Speed Box SE
(Picture shows Xtension/RS-309D)
Turntable
Available finishes
Olive
Mahogany
Black gloss
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
Electronic speed change between 33 and 45 r.p.m.. Switching to 78 r.p.m. is done manually.
The medium density fibre plinth rests on four individually height-adjustable magnetic field feet. A build in spirit
level allows easy adjustment of the chassis.
The resonance-optimised platter is a sandwich construction utilising a fine-balanced and damped aluminium
platter weighing 5,7kg and a 4mm thick flat-ground layer of vinyl and a brass record puck.
The magnet supported, inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic
bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
External power supply avoids potential electro-mechanical interference.
High quality interconnect cable Pro-Ject Connect it 5P-C (123cm length) included.
Tonearms
Model X tension / AS-212S with static balanced 9" tonearm Ortofon AS-212S
Model X tension / AS-309S with static balanced 12" tonearm Ortofon AS-309S
Model X tension / RS-212D with dynamic balanced 9" tonearm Ortofon RS-212D
Model X tension / RS-309D with dynamic balanced 12" tonearm Ortofon RS-309D
Model X tension / without tonearm. Arm board for 9" and 12" tonearms
Dimensions W x H x D: With dust cover closed 550 x 250 x 450mm, dust cover open 550 x 550 x 560mm.
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
35
Product information
36
Pro-Ject RPM 1.3 Genie
Manual turntable with fitted cartridge
Ortofon OM 3E or
Ortofon 2M Red
Turntable
Chassis available in matt black, glossy black, red and white
A quiet running synchronous motor with a two-step pulley drives the platter's outside edge via a
silicon belt.
The drive motor is isolated on its own platform and completely decoupled from the plinth to eliminate
vibration transmission.
The resonance-optimised platter is made of medium density fibre.
A inverted, chrome-plated stainless-steel axle runs on a polished metal ball in a sintered bronze bearing
housing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 8.6s
The turntable is supplied with Ortofon OM 3E or Ortofon 2M Red MM-cartridge fitted
The headshell and armtube are fashioned from a single piece of aluminium.
The horizontal bearings consist of two hardened stainless steel points and ballraces.
Eccentrically mounted counterweight reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
The counterweight supplied is suitable for cartridges weighing between 4 - 9g
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
The internal wiring consists of silver coated, high-purity copper.
Dimensions W x H x D: 380 x 115 x 350mm
Cartridge: Output voltage 4 or 5.5mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject RPM 5.1
Manual turntable.
Optional with fitted cartridge
Ortofon 2M Red
Turntable
Chassis piano-lacquered dark grey
A quiet running AC motor with a two-step pulley drives the hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable rubber-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre
platter, a cork mat (a standard felt mat is supplied also) and a screw-down record clamp.
The platter's low-tolerance chrome-plated stainless-steel axle runs on a Teflon bearing plate in a sintered
bronze bearing housing.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc
As an optional extra, the turntable is supplied with Ortofon 2M Red MM-cartridge fitted.
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: 371 x 145 x 300mm. Dust cover Cover it optional. W x H x D: 460 x 225 x 365mm.
Cartridge: Output voltage 5,5mV. Recommended load resistance 47kohms (MM-input).
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
37
Product information
Pro-Ject RPM 6.1 SB
Manual turntable with
electronic speed change
Turntable
A quiet running AC motor with a two-step pulley drives the acrylic hub and platter via a flat-ground belt.
The medium density fibre plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
The motor is decoupled from the plinth to reduce vibration transmission.
The resonance-optimised platter is a sandwich construction utilising the hub, an medium density fibre
platter, a 4mm thick flat-ground layer of vinyl and a brass record puck.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
Electronic speed change for 33 / 45 r.p.m.. Switching to 78 r.p.m. is done manually.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through the
gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9c
Conical carbon-fibre armtube avoids standing wave reflections.
Low mass aluminium headshell securely glued to armtube.
The inverted bearings consist of four hardened stainless steel points bearing in sapphire cushes.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 10 - 15g, 9 - 11g or 4 - 6g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: 385 x 170 x 330mm. Dust cover Cover it optional. W x H x D: 460 x 225 x 365mm.
The manufacturer reserves the right to alter the technical specifications without notice.
38
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject RPM 9.1 Acryl
Manual turntable
Turntable
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The transparent acrylic plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
A supplied spirit level allows easy adjustment.
The motor is mounted in a separate metal housing to eliminate vibration transmission.
The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg
and a brass record puck.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The outside ring is open to avoid resonances.
Design of counterweight effectively counteracts unwanted resonances.
The counterweight supplied is suitable for cartridges weighing between 6 - 10g. Alternative counterweights for
cartridges weighing between 11 - 15g, 8 - 11g or 5 - 8g are available as an accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
39
Product information
Pro-Ject RPM 9.2 Evolution
Manual turntable
Turntable
Chassis and motor housing piano-lacquered dark grey
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The medium density fibre plinth rests on three individually height-adjustable magnetic field feet.
A supplied spirit level allows easy adjustment. Granulate filled plinth guarantees constant damping.
The motor is mounted in a separate metal housing to eliminate vibration transmission.
The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 3,5Kg
and a brass record puck.
The inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 9cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
The counterweights supplied are suitable for cartridges weighing between 5 - 7,5g, 7 - 10g, 9 - 11g or 10 - 14g
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions W x H x D: Including motor unit 440 x 180 x 325mm.
Dust cover Cover it optional. W x H x D: 525 x 290 x 425mm.
The manufacturer reserves the right to alter the technical specifications without notice.
The colours in the picture may differ slightly from the actual article due to inaccuracies in the printing process.
40
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
Product information
Pro-Ject RPM 10.1
Evolution
Manual turntable with
10" tonearm and
equipment base
Pro-Ject Ground it deluxe 3
Turntable
Chassis, motor housing and granulate filled equipment base Ground it deluxe piano-lacquered dark grey
The equipment base Ground it deluxe rests on four individually height-adjustable magnetic field feet.
A quiet running AC motor with a two-step pulley drives the platter's outside edge via a belt.
The medium density fibre plinth stands on three height-adjustable Sorbothane®-damped aluminium cones.
Granulate filled plinth guarantees constant damping. A supplied spirit level allows easy adjustment.
The motor is mounted in a separate metal housing to eliminate vibration transmission.
The resonance-optimised platter is a sandwich construction utilising an acrylic platter weighing 5,4Kg
and a brass record puck.
The magnet supported (amount of support adjustable), inverted bearing uses a stainless-steel axle carrying a
ceramic ball on which the ceramic bearing plate runs.
Central metal block optimises centre of gravity and damps main bearing.
Connection to the phono input of the amplifier can be made with connecting cables of your taste through
the gold plated phono sockets and earth screw. A standard cable is provided.
External power supply avoids potential electro-mechanical interference.
Tonearm Pro-Ject 10cc Evolution
The headshell and armtube are fashioned from a single piece of carbon-fibre.
Conical armtube avoids standing wave reflections.
Inverted tonearm bearing comprises four hardened stainless tips in ABEC7 spec ballraces.
Rings provide very solid arm bearing housings. The massive outside ring is open to avoid resonances.
Sorbothane®-damped counterweight effectively counteracts unwanted resonances.
The counterweights supplied are suitable for cartridges weighing between 4 - 6g, 5 - 8g, 6 - 10g or 8 - 14g.
An alternative counterweight for cartridges weighing between 15 - 20g or 17 - 22g is available as an
accessory part.
Counterweight shaft lowered to record level reduces cantilever forces and dynamic wow when playing
warped records.
Solid armbase permits accurate height adjustment of armtube and VTA (vertical tracing angle).
Single-screw fixing of armtube allows rotation for easy adjustment of needle azimuth despite fixed headshell.
Silicone-damped armlift can be adjusted to suit working height of the arm.
The internal wiring consists of flexible high-purity copper from the headshell right through to the gold-plated
phono sockets.
Dimensions turntable, W x H x D: Including motor unit 480 x 210 x 330mm.
Dimensions equipment base Ground it deluxe 3: 500 x 80 x 400mm
Dust cover Cover it optional, W x H x D: 525 x 290 x 425mm.
The manufacturer reserves the right to alter the technical specifications without notice.
Pro-Ject Audio Systems is a registered trademark of Heinz Lichtenegger
1050 Vienna · Margareten Road 98 · Tel. +43(0)15448580 · Fax. +43(0)15456697
www.project-audio.com · © Heinz Lichtenegger · Revision 15.10.10
41
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising