pro-ject phono - Helder Meerssen

pro-ject phono - Helder Meerssen
PRO-JECT PHONO
PRODUCT CATALOGUE October 2013
GO ANALOGUE · IN THE THIRD MILLENNIUM · PHONO PRODUCTS web-2013
PRODUCT CATALOGUE 10/’13
CONTENTS
page
page
Debut-3 Line
3
Tonarms
8
Debut Carbon Line
3
Cartridges
8
RPM Line
4
Phono Electronics
9
Classic Line
5
Accessories
11
Signature Line
7
Phono Cables
15
Special Limited Edition
7
ABOUT PRO-JECT AUDIO SYSTEMS AND BOX DESIGN
Pro-Ject Audio Systems was founded by Heinz Lichtenegger 1990 in
Vienna, with the idea that analogue playback is the most cost- effective way
to listen to music of audiophile quality.
Inspired by the concept of supporting analogue in the face of the digital
onslaught, Pro-Ject Audio Systems became one of the most
powerful driving forces in reinventing analogue turntables for the hi-fi
market. Today, Pro-Ject Audio Systems is the world leader in the
manufacture of quality hi-fi turntables, as turntables are once again accepted as
a must-have for every concerned music lover. Pro-Ject
products are exported to almost 80 countries worldwide and is the
recipient of nearly every award in the audio industry.
Since 2006, PRO-JECT Audio has been bringing its "less is more" mission to the digi- tal
world. Inspired by the new possibilities of the iPod and high-quality music reproduction from a PC or laptop, Pro-Ject Audio Systems has designed a complete
new and revolutionary range of MICRO HIGH-END Hi-fi components under the family name BOX DESIGN. Starting with the smallest audiophile amp in the world, with
open and euphonic sound, Pro-Ject Audio now produces all of the components of traditional hi-fi systems
including CD players, tuners, phono amps, headphone amps and switching modules, as well as digital prod- ucts such as
docking stations, D/A converters and streamers to connect with the PC wired or wireless.
BOX DESIGN regards itself as the 'next generation of hi-fi' - the link between the micro-sized hardware of the
IT world and the big boxes of the audiophile world. All products, except for speakers and headphones, are designed and
produced in Europe.
PRO-JECT: Simple-to-use, high quality sound, astonishing value, long-term stability and good service.
2
CATALOGUE web-2013 · PRO-JECT PHONO
Debut-3 Line
Debut-3
Audiophile "Best Buy" turntable
• Belt drive • Low vibration synchronous motor • 8,6" aluminium tonearm • Ortofon OM5e
cartridge, pre-mounted • Connection to phono preamp or amplifier with phono
preamp required • Pre-mounted interconnect cable with gold-plated RCA plugs
• Colour: mat black
Debut-3 Phono & Debut-3 E
Audiophile "Best Buy" turntable
• Belt drive • Low vibration synchronous motor • 8,6" aluminium tonearm • Ortofon OM5e
cartridge, pre-mounted • Connections: line-level RCA to amp
• Debut-3 Phono: Integrated Phono-MM preamplifier
• Debut-3 E: automatic turn-off.
• Colour options: mat black, silver
Debut Carbon Line
DEBUT CARBON
Audiophile "Best Buy" turntable
• 8,6" carbon tonearm • Increased platter size with more weight • Precision belt drive with
synchronous motor • New sorbothane motor suspension • Felt mat • magnetic cartridge options
from Ortofon OM-10 or 2M-red • 7 high-gloss colours: Green, Piano, Blue, White, Red, Light-Grey,
DEBUT CARBON PHONO USB
Audiophile turntable for Hifi & Audio-Transfer to PC/Mac
• 8,6" carbon tonearm • Increased platter size with more weight • Precision belt drive with
synchronous motor • New sorbothane motor suspension • Felt mat • Integrated Phono-MM
preamplifier • Connections: line-level RCA to amp & USB to PC/Mac (simultaneously) • magnetic
cartridge: OM-10 • 7 high-gloss colours: Blue, Yellow, White, Green, Piano, Red, Light-Grey
DEBUT CARBON ESPRIT
Audiophile "Best Buy" turntable
• 8,6" carbon tonearm • Heavy non-resonant acrylic platter • Precision belt drive with synchronous
motor • New sorbothane motor suspension • magnetic cartridge 2M-red from Ortofon • 7 high-gloss
colours: Green, Piano, Blue, White, Red, Light-Grey, Yellow
PRO-JECT PHONO · CATALOGUE web2013
3
RPM Line
RPM 1.3 GENIE
Manual turntable with S-shaped 8.6" tone-arm
• Chassis options: matt black (OM-5), glossy black, red and white (2M-red) • quiet running synchronous
motor • 2-step pulley • outside driven via belt • isolated motor platform, completely decoupled
from the plinth• eliminates vibration transmission • resonance-optimised platter made of medium
density fibre • inverted, chrome-plated stainless-steel axle • polished metal ball in sintered bronze
bearing housing • interchangeable connecting cables • gold plated phono sockets • External power
supply avoids potential electro-mechanical interference.
RPM 5.1
Manual turntable with 9" carbon tone-arm
• Chassis piano-lacquered dark grey • belt drive • AC motor with 2-step pulley • MDF plinth • 3
height-adjustable rubber-damped aluminium cones • motor decoupled from plinth reduces vibration
transmission • resonance-optimised MDF sandwich platter • cork mat plus standard • screw-down
record clamp • low-tolerance chrome-plated stainless-steel • Teflon bearing plate in sintered bronze
bearing housing • Central metal block optimises centre of gravity and damps main bearing •
interchangeable connecting cables • gold plated phono sockets and earth screw • standard cable is
provided • External power supply avoids potential electro-mechanical interference
RPM 9.1X Acryl
Manual turntable
• Belt drive • AC motor with 2-step pulley • transparent acrylic plinth • 3 height-adjustable
Sorbothane®-damped aluminium cones • spirit level supplied • separate metal housing for motor •
resonance-optimised acrylic platter weighing 3,5Kg • brass record puck • inverted bearing with
stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate runs • Central metal
block optimises centre of gravity and damps main bearing • interchangeable connecting cables • gold
plated phono sockets and earth screw • standard cable is provided • External power supply
RPM 9.2 Evolution
Manual turntable
• Chassis and motor housing piano-lacquered dark grey • belt drive • AC motor with 2-step pulley •
MDF plinth • 3 individually height-adjustable magnetic field feet • spirit level supplied • Granulate
filled plinth guarantees constant damping • separate metal housing for motor • The resonanceoptimised acrylic platter weighing 3,5Kg • brass record puck • inverted bearing with stainless-steel
axle carrying a ceramic ball on which the ceramic bearing plate runs • Central metal block optimises
centre of gravity and damps main bearing • interchangeable connecting cables • gold plated phono
sockets and earth screw • standard cable is provided • External power supply
RPM 10.1 Evolution
Manual turntable
• Chassis, motor housing and granulate filled equipment base Ground it deluxe piano-lacquered dark
grey • Ground it deluxe uses 4 individually height-adjustable magnetic field feet • AC motor with 2step pulley • MDF plinth • height-adjustable Sorbothane®-damped aluminium cones • Granulate
filled plinth guarantees constant damping • spirit level supplied • separate metal housing for motor •
The resonance-optimised magnetically supported acrylic platter weighing 5,4Kg • brass record puck •
inverted bearing uses a stainless-steel axle carrying a ceramic ball on which the ceramic bearing plate
runs • Central metal block optimises centre of gravity and damps main bearing • interchangeable
connecting cables • gold plated phono sockets and earth screw • standard cable is provided •
External power supply avoids potential electro-mechanical interference
4
CATALOGUE web2013 · PRO-JECT PHONO
Classic Line
1XPRESSION III
Manual turntable including carbon tone-arm
• Belt drive design • low noise AC motor • MDF plinth • high gloss anthracite surface • Acrylic 0,9 kg
platter • Platter bearing with low-tolerance chrome-plated stainless-steel axle running on polished
ball bearing in brass bearing housing • Motor decoupling reduces vibration • Height adjustable
rubber-damped aluminum cones • Gold-plated RCA phono sockets
1XPRESSION III Comfort
Manual turntable including carbon tone-arm with electronic speed selector and limit stop
• Same as above, but with: • Integrated Speed Box: electronically switchable speed between 33 and
45 Rpm • Automatic cutoff at the end of the record
1XPRESSION III CLASSIC
Manual turntable. with fitted cartridge Ortofon 2M Red
• Available finishes: Mahogany, olive veneer and piano-lacquered black • Belt drive design • low
noise AC motor • MDF plinth •height-adjustable rubber-damped aluminium cones • Motor
decoupling reduces vibration • fine-balanced aluminium platter • cork mat & standard felt mat
supplied • low-tolerance chrome-plated stainless-steel axle running on polished ball bearing in brass
housing • interchangeable connecting cables • gold plated phono sockets and earth screw • standard
cable is provided • External power supply avoids potential electro-mechanical interference
2XPERIENCE ACRYL
Manual turntable.
• Belt drive design • low noise AC motor • transparent acrylic plinth • height-adjustable Sorbothane®-
damped aluminium cones • Motor decoupling reduces vibration • resonance-optimised MDF/vinyl
sandwich platter weighing 2Kg • screw-down metal record clamp • low-tolerance chrome-plated
stainless-steel axle running on Teflon bearing plate in sintered bronze bearing housing • gold plated
phono sockets and earth screw • standard cable is provided • External power supply
2XPERIENCE CLASSIC
Manual turntable.
• Available finishes: Mahogany, olive veneer, piano-lacquered black • Belt drive design • low noise AC
motor • height-adjustable Sorbothane®-damped aluminium cones • Motor decoupling reduces
vibration • resonance-optimised MDF/vinyl sandwich platter weighing 2Kg • screw-down metal
record clamp • low-tolerance chrome-plated stainless-steel axle running on Teflon bearing plate in
sintered bronze bearing housing • gold plated phono sockets and earth screw • standard cable is
provided • External power supply
PRO-JECT PHONO · CATALOGUE web2013
5
6PERSPEX
Manual turntable
• Belt drive design • Transparent acrylic plinth • 3 individually height-adjustable Sorbothane®damped aluminium cones carry motor sub-chassis • Corian subchassis rests on 3 magnetic feet • built -in
spirit level • silent running AC motor with 2-step pulley • inverted bearing uses stainless-steel axle
carrying a ceramic ball on which ceramic bearing plate runs • resonance-optimised sandwich platter
weighing 2Kg with 4mm vinyl-layer • screw-down metal record clamp • 9" Evolution tonearm • gold
plated phono sockets and earth screw • standard cable is provided • External power supply
XTENSION 10
Highend turntable with 10" tonearm
• Super-heavy 22 kg belt drive turntable • Mass loaded magnetic floating subchassis • Precision
balanced sandwich-platter • Inverted ceramic ball bearing with magnetic support • Heavy weight
record clamp • Extremely low level of natural resonance • Perfect decoupling through magnetic
feet • Electronic speed control 33/45/78 Upm • Tonearm 10cc Evolution made from carbon fibre •
Inverted tonearm bearings (ABEC 7 quality)
XTENSION 12
Manual turntable with built-in Pro-Ject Speed Box SE
• Super-heavy 25 kg mass load magnetic floating belt drive design • Sorbothane® damped ultra
precise balanced Sandwich platter made out of special alloy combined with vinyl layer • Brass record
puck • Ultra low noise motor highest selection • Magnet supported, inverted main bearing with
ceramic thrust-pad • Integrated Speed Box SE for super silent motordrive and electronically
switchable speed • Metal-granulate filled plinth for universal damping • Mass loaded interchangeable
armboard • Height adjustable magnet supported feet for perfect isolation • Gold-plated RCA phono
sockets
6
CATALOGUE web2013 · PRO-JECT PHONO
Signature Line
SIGNATURE 12
Highend turntable
• Mass-loaded subchassis design • Magnetically decoupled main platter • Resonance-optimised
alloy • Inverted main bearing with ceramic ball • Flywheel belt drive • Motor control system with LC
display • Single-pivot tonearm • High gloss metal surface • Piano-lacquer chassis with magnetic
decoupling
Special Limited Edition
1 ANNIVERSARY
Jubilee - Version
• Arm bearings are precision made from hardened stainless steel points centred in sapphires
mounted in low resonance rings • vertical and lateral tracing angle are adjustable • fine balanced
platter with chromium-plated axle turns in a sintered bonze bearing housing • Teflon bearing thrust
plate for extremely low noise bearing • Motor and drive pulley for the precision ground drivebelt
decoupled from plinth via four rubber dampers
ART1
Turntable as „Hear & See" artwork
• Designed by Austrian artist Barbara Mungenast • Incividually signed by the artist • Limited Edition only 100 pieces worldwide ! • Social sponsoring with revenues • Based on Pro-Ject Debut III •
Highend Tuning Kit included • Ortofon 2M Blue included
2XPERIENCE BASIC+ ACRYL
Limited edition with Ortofon MC25e
• Belt drive turntable with single pivot tonearm • 33/45 rpm with manual speed change • MDF
platter with felt mat • Stand-alone motor base • Audiophile grade tonearm cable included •
Transparent acrylic version with Ortofon MC25e
2XPERIENCE BASIC+ PIANO
Limited edition with MC-Cartridge Pro-Ject Pick-it MC-1H
• Belt drive turntable with single pivot tonearm • 33/45 rpm with manual speed change • MDF
platter with felt mat • Stand-alone motor base • Audiophile grade tonearm cable included • Piano
black version with Pro-Ject MC-1H
PRO-JECT PHONO · CATALOGUE web2013
7
Tonearms
PRO-JECT CC TONEARMS
FL
5P
BOX
9CC
SRP € 549,00
SRP € 579,00
SRP € 599,00
10CC
SRP € 569,00
SRP € 599,00
SRP € 619,00
12CC
SRP € 799,00
SRP € 829,00
SRP € 849,00
9CC - 9" precision tonearm with carbon-fibre armtube/headshell
• Conical carbon-fibre armtube avoids standing wave reflections • Inverted bearing design with four
hardened ABEC7 spec ballraces • Solid armbase permits accurate height adjustment of armtube and
VTA (vertical tracing angle) • Single-screw fixing of armtube allows rotation for easy adjustment of
needle azimuth despite fixed headshell • Highly flexible top-grade copper internal wiring • Linn
standard mount • Available with 5-pole standard socket, flying leads or terminal with phono sockets
and earth screw
10CC - 10" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 10" length
12CC - 12" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 12" length
PRO-JECT CC EVOLUTION TONEARMS
FL
9CC EVOLUTION
SRP € 799,00
SRP € 829,00
SRP € 849,00
10CC EVOLUTION
SRP € 849,00
SRP € 879,00
SRP € 899,00
12CC EVOLUTION
SRP € 899,00 5P
SRP € 929,00 BOX
SRP € 949,00
9CC EVOLUTION - 9" precision tonearm with carbon-fibre armtube/headshell
• Conical carbon-fibre armtube avoids standing wave reflections • Inverted bearing design with four
hardened ABEC7 spec ballraces • Solid armbase • accurate height adjustment of armtube and VTA
(vertical tracing angle) • Single-screw fixing of armtube allows rotation for easy adjustment of needle
azimuth despite fixed headshell • internal wiring • Linn standard mount • Available with 5-pole
standard socket, flying leads or terminal with phono sockets and earth screw
10CC EVOLUTION - 10" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 10" lenght
12CC EVOLUTION - 12" precision tonearm with carbon-fibre armtube/headshell
Same as above, but 12" lenght
Cartridges
PICK IT MC-1
Phono MC cartridge for turntables
• Moving Coil principle • More dynamic playback than MM cartridges • High trackability • 0,5mV
output • MC-1 suits nearly all preamplifiers/step-up transformers • Suitable for light to medium
tonearm mass • 1/2-inch mount • As with all MC cartridges, stylus can not be exchanged
PICK IT MC-1H
High-output Phono MC cartridge for turntables
• Moving Coil principle • More dynamic playback than MM cartridges • 2,3mV output • High
trackability • MC-1H connects directly to MM phono preamp • Suitable for light to medium tonearm
mass • 1/2-inch mount • As with all MC cartridges, stylus can not be exchanged
8
CATALOGUE web2013 · PRO-JECT PHONO
Phono Electronics
RECORD BOX USB
MM Phono Pre-amplifier with A/D converter and USB output
• Metal case shields the electronics from vibrational and electromagnetic interference • Optimal
channel separation through dual-mono circuitry • Special low-noise ICs used • Gold plated RCA
connection sockets • Outboard power supply included • Digitalisation of analogue signals for
recording direct to disk via USB with suitable recording programs • Automatic recognition, without
additional driver, by standard PC • Runs on Windows® and Mac OS® operating systems • Small size
allows installation close to record player
PHONO BOX MM
MM Phono Pre-amplifier
• Metal case shields the electronics from vibrational and electromagnetic interference • Special lownoise ICs used • Optimal channel separation through dual-mono circuitry • Gold plated RCA
connection sockets • Outboard power supply included • Amplification and RIAA equalisation for MM
cartridges • Small size allows installation close to record player
PHONO BOX
MM/MC Phono preamp with line output
• Preamplifier for MM or MC with switch on rear panel • Best buy classic • "green" DC power supply (< 1
watt standby power) • Precise RIAA equalisation • Low noise ICs • Output stage with ultra-low
impedance • Gold-plated RCA sockets • Small size for installation near record player • Available in
black and silver
PHONO BOX USB
MM/MC Phono preamp with line & USB outputs
• Preamplifier for MM or MC with switch on rear panel • "green" DC power supply (< 1 watt standby
power) • Precise RIAA equalisation • High quality A/D conversion with USB out to PC/Mac •
Compatible with Windows®, MacOS® • SMD technology for shortest signal paths • Gold-plated RCA
sockets • Output stage with ultra-low impedance • Available in black and silver
PHONO BOX USB V
MM/MC Phono/line preamp with line & USB outputs
• Preamplifier for MM or MC with switch on rear panel • "green" DC power supply (< 1 watt standby
power) • Precise RIAA equalisation • Phono/line selector on front • Record level adjustment • High
quality A/D conversion with USB out to PC/Mac • Compatible with Windows®, MacOS® • SMD
technology for shortest signal paths • Output stage with ultra-low impedance • Available in black and
silver
PHONO BOX S
"Best Buy" MM/MC phono preamplifier
• Audiophile Performance • Dual mono configuration • Audiophile-grade amplification modules •
Audiophile-grade polypropylene WIMA capacitors • Precise RIAA equalisation • Switchable Subsonic
filter -12dB @ 20Hz • Switchable input impedance/capacitance • 4 adjustable gain levels •
Outstanding sound quality
PRO-JECT PHONO · CATALOGUE web2013
9
TUBE BOX S
MM/MC phono preamplifier with tube output stage
• Audiophile Performance • Audiophile-grade ECC83 (12AX7) • Dual mono configuration • Audiophile grade polypropylene WIMA capacitors • Precise RIAA equalisation • Switchable input impedance/
capacitance • 3 adjustable gain levels • Subsonic filter • Outstanding sound quality
SPEED BOXS
Electronic motor control and speed change
• Quartz-generated high precision electronic speed regulation with microprocessor control • Sound
improvement through motor running smoothness • Clean power decoupled from mains
interference • Allows electronic speed change 33 & 45 rpm • 78 rpm possible with optional accessory
pulley • Suitable for all turntables with 16 volt AC motor, up to 3 watt max. power consumption •
Metal case shields electronics from vibration and electromagnetic interference • Small size allows
installation close to record player • Outboard power supply included • Available in silver or black
PHONO BOX DS
Phono preamplifier
• MM & MC capable • Linear RIAA equalisation • Ultimate circuit technology from Dr. Sykora,
simplified version of Phono Box DS+ without display & relays switching • Ultra low noise & low
distortion levels • SMD circuitry • Subsonic filter (switchable on rear panel) • Substantial setup
options • Comfortable switching via buttons on front • Metal casing protects against vibration and
interference • Faceplate silver or black
PHONO BOX DS +
Phono preamplifier
• MM & MC capable • Linear RIAA equalisation • Ultimate circuit technology from Dr. Sykora • Ultra
low noise & low distortion levels • Double mono SMD circuitry • Low loss polypropylene capacitors •
Substantial setup options • Classy & elegant display shows setup parameters • Relay switching •
Metal casing protects against vibration and interference • Faceplate silver or black
TUBE BOX DS
MM/MC tube phono preamplifier
• MM & MC support • Precise RIAA equalisation • Ultra low noise circuitry • ECC 83 tube output
stage • Input impedance adjustment for low output MC on front • Input capacitance adjustment in 4
steps (MM & Hi-output MC) • Switchable subsonic filter • Gold plated RCA sockets • Metal casing
protects against vibration and interference • Front-sided On/Off switch • Faceplate silver or black
PHONO BOX RS
Highend phono preamplifier
• MM & MC capable • Fully balanced double mono design • Fully passive RIAA & DECCA
equalisation • Unique continously variable input impedance loading, matches every cartridge
(adjustment even while playing) • RCA & XLR In & Out • Superior low noise / low distortion • Classy &
elegant dip switches • Metal casing protects against vibration and interference • Faceplate silver or
10
CATALOGUE web2013 · PRO-JECT PHONO
Accessories to play 78rpm records
PULLEYSB
Pulley 33 & 45 & 78rpm in combination with Speed Box
78rpm possible by replacing original drive pulley for "Pulley SB" and addition of Speed Box S (suitable for
turntables with 16V AC motors) or Speed Box SE / DS (suitable for turntables with 230V and 16V
AC motors) • not usable with all turntables, please consult your Pro-Ject partner
78RPM PULLEY SET 50 or 60HZ
Pulley + Belt for gramophone playback
Optional pulley set converts any Pro-Ject turntable for gramophone playback. Please note that a
special cartridge stylus may be required
Accessories for adjustment
ADJUST IT
Tonearm bearing adjustment tool
• Suitable for all Pro-Ject tonearms • Allows fine adjustment of bearings, if misadjusted • Caution: for
qualified personnel only! • Includes 2 inserts for different bearings • Full metal (aluminium& brass)
ALIGN IT
Cartridge alignment tool
• Tool for cartridge alignment and adjustment • Special slip-proof tool for defining the turning centre
of Pro-Ject tonearms • Adaptable to accommodate differing tonearm lengths • Suitable for other
manufacturers' tonearms • Suitable for tonearms between 8" (203mm) and 12"(305mm) effective
length
LEVEL IT
Spirit level for optimum positioning of a turntable
• Making sure your turntable is level is critical for set-up and playback • Double check with this handy
tool
MEASURE IT II
Electronic stylus balance
• 4 digit LCD-Display with backlight • Capacity 0 - 5g • Variance ±0,002g • Auto calibration function •
Auto off after 120 seconds • Replacement batteries supplied
STROBE IT
Control of turntable speed
• speed control for 33/45/78 rpm • 50/60 Hz • caartridge alignment scheme included
PRO-JECT PHONO · CATALOGUE web2013
11
Accessories for sound tuning
ACRYL IT
Turntable platter
• Suitable for Debut and Xpression turntables • Substitutes metal platter • Inert material avoids
resonances • Dent for label implemented • Ideal for use with Clamp it • Audiophile sound tuning •
Optical upvaluation
CORK IT
Sound tuning with turntable mats
• Alternative platter mats with special sound characteristics • Substitutes felt mats • Damping of
resonances from metal turntable platters • Less noise • Avoids static load • Suitable for all
turntables • Perfect combined with Clamp it
LEATHER IT
Sound tuning with turntable mats
• Alternative platter mats with special sound characteristics • Substitutes felt mats • Damping of
resonances from metal turntable platters • Less noise • Avoids static load • Suitable for all
turntables • Perfect combined with Clamp it
FELT MAT
Felt mat for Debut turntables
• Individual colours give your turntable a very special appearance • Diameter 280 or 300mm • 9
different colours: Black, dark-grey, light-grey, dark-red, orange, yellow, neon-green, green, blue
CLAMP IT
Record clamp
• Sound improvement for all turntables • Reduces unwanted resonances during playback • Fast and
easy mounting • Fine-adjustment of tightening force • Full metal accessory with leather coating •
Diamond cut finish
RECORDPUCK
Heavy weight record clamp
• Sound improvement for nearly all turntables • Reduces unwanted resonances during playback • Fast
and easy mounting • Full brass accessory • Because of weight (870gr.) not suitable for every
turntable: >>consult your dealer!
12
CATALOGUE web2013 · PRO-JECT PHONO
GREASE IT
High-tech lubricant
• constant velocity • 5ml
GROUND IT DELUXE
GROUND IT DELUXE 1
GROUND IT DELUXE 2
GROUND IT DELUXE 3
Equipment bases
• Resonance free placement for turntables & hifi • Heavy weight base filled with granular damping •
2 models with adjustable spikes (3 or 4 may be fitted) • 1 model with height adjustable magnetic
feet • Dark grey piano lacquer finish • Matches charcoal finish of Pro-Ject turntables • Ground it
deluxe 1: Dimension: 500 x 65 (45)x 400mm incl. spikes (without spikes) Weight: 11,6 kg • Ground it
deluxe 2: Dimension: 435 x 65 (45)x 340mm incl. spikes (without spikes) Weight: 8,5 kg • Ground it
deluxe 3: Dimension: 500 x 65 (45) x 400mm incl. feet (without feet) Weight: 13,5 kg
WALLMOUNT IT 1
Wall mount equipment rack
• Welded steel frame construction. Matt black finish • Wooden veneer board, black finish • Four
height-adjustable spikes to level the board • Surface area (W x D): 460 x 355mm • Overall dimensions
(W x H x D): 460 x 90 x 415mm
WALLMOUNT IT 2
Wall mount equipment rack
• Welded steel frame construction. Matt black finish • Wooden veneer board, black finish • Four
height-adjustable spikes to level the board • Surface area (W x D): 460 x 355mm • Overall dimensions
(W x H x D): 490 x 260 x 455mm
WALLMOUNT IT 3
Wall mount equipment rack
• Screwed steel construction. Matt black finish • Lacquered MDF board. Matt black • Three heightadjustable spikes to level the board • Surface area (W x D): 520 x 450mm • Overall dimensions (W x H
x D): 635 x 290 x 455mm
Accessories for cleaning
BRUSH IT
Carbon-fibre brush for record cleaning
• Anti static record cleaner • Conductive carbon fibers • Eliminates static charges • Removes finest
dust particles
CLEAN IT
Carbon fibre stylus cleaning brush
• Smooth cleaner for diamant stylus • Conductive carbon fibers • Eliminates static charges • Removes
finest dust particles
PRO-JECT PHONO · CATALOGUE web2013
13
SPIN-CLEAN®
SPIN-CLEAN RECORDWASHER SYSTEM MKII
SPIN-CLEAN RECORDWASHER MKII PACKAGE
SPIN-CLEAN RECORDWASHER MKII PACKAGE - LIMITED EDITION
Record washer
Clean your valuable vinyls gently, but efficiently! Clean records sound much better and help to protect
the stylus from dust. Spin Clean clears manually and is suitable for all kinds of records: LP's, 45's, 78's
Spin Clean Record washer system includes all necessary parts: 4 oz. (118ml) washer fluid, 2 brushes
and dryer cloths. Of course all components of Spin-Clean are available as accessories!
SPIN-CLEAN® WASHER FLUID
SPIN-CLEAN WASHER FLUID 8 OZ (237 ML)
SPIN-CLEAN WASHER FLUID 16 OZ (473 ML)
SPIN-CLEAN WASHER FLUID 32 OZ (946 ML)
SPIN-CLEAN® BRUSHES (ONE PAIR)
Replacement brushes
SPIN-CLEAN® ROLLERS (ONE PAIR)
Replacement rollers
SPIN-CLEAN® DRYING CLOTHS (5-PACK)
Washable dry cloths
SPIN-CLEAN® OPTICAL DISC CLEANER
SPIN-CLEAN DISCMIST OPTICAL DISC CLEANER 2 OZ (59 ML)
SPIN-CLEAN DISCMIST OPTICAL DISC CLEANER 4 OZ (118 ML)
SPIN-CLEAN DISCMIST OPTICAL DISC CLEANER 8 OZ (237 ML)
Various accessories
ADAPT IT
Single puck
• Adaptor for use with 7-inch single records • Locates record centrally on turntable • No plastic precision CNC-machined • Non-magnetic aluminium • Suitable for all brands and types of record
players • 2 colour options: black or blue
COVER IT
COVER IT 1
COVER IT 2.1
COVER RPM 1/5
COVER RPM 9
Universal dust cover
• Crystal clear acrylic cover for turntables • Protects turntable and needle • 2 models: Cover it 1 &
Cover it 2.1 • Cover it 1 suits Ground it deluxe 1 • Cover it 2.1 suits Ground it deluxe 2 & 3
CUBEIT
CUBE IT BLACK
CUBE IT LIGHT-BEECH
CUBE IT LIGHT-OAK
CUBE IT GD LIGHT-OAK
CUBE IT GLASS SHELVES
Vinyl storage with or without glass door
• 3 different wood finishes: Black, light beech, light oak • Outer dimensions: 400 x 400 x 400 mm •
Inner dimensions: 364 x 364 x 364 mm
14
CATALOGUE web2013 · PRO-JECT PHONO
PLAY & DISPLAY
12'' Vinyl display frame
• Stylish hifi accessory for vinyl lovers • First ever vinyl display frame that can have its contents
changed without being removed from the wall • Any space can be personalised in seconds • British
Design Classic • Internationally patented • Beautifully packaged for instant gifting • Renewed
enjoyment to record collections • Customer friendly priced triple packs
Q UP
Automatic tonearm lifter for manual turntables
• Lifts tonearm, when it moves to the end of a record • Extends stylus life • Suits nearly all tonearms
and manual turntables • Includes three stackable platforms for turntables with thick platters •
Adjustable trigger sensitivity • No AC or battery power needed • Easy to mount, no additional tools
necessary!
Phono Cables
CONNECT IT PHONO
Length
5PC
5P CC / 5P XLR CC 5P SI / 5P XLR SI 0,82 m 1,23 m 1,85 m
Phono 5P C - Electrically shielded with conductors made of OFC (oxygen free copper)
Interconnect cable with earthing wire, 2x RCA phono plugs + 1x 5-pole standard tonearm socket.
Option: 90º angled 5-pol. standard tonearm socket.
Phono 5P CC / 5P XLR CC - Electrically shielded with conductors made of OFC (oxygen free copper)
and an additional layer of carbon fibre
Interconnect cable with earthing wire, 2x RCA phono plugs + 1x 5-pole standard tonearm socket.
Option: 90º angled 5-pol. standard tonearm socket.
Phono 5P SI / 5P XLR SI - Electrically shielded with conductors made of pure silver and RCA phono
plugs with locking function
Interconnect cable with earthing wire, 2x RCA phono plugs + 1x 5-pole standard tonearm socket.
Option: 90º angled 5-pol. standard tonearm socket.
CONNECT IT PHONO
Length
RCAC
0,82 m 1,23 m 1,85 m
RCACC / XLR CC
RCA SI / XLR SI
Phono RCA C - Electrically shielded with conductors made of OFC (oxygen free copper)
Interconnect cable with earthing wire, 4x RCA phono plugs.
Phono RCA CC / XLR CC - Electrically shielded with conductors made of OFC (oxygen free copper)
and an additional layer of carbon fibre
Interconnect cable with earthing wire, 4x RCA phono plugs.
Phono RCA SI / XLR SI - Electrically shielded with conductors made of pure silver and RCA phono
plugs with locking function
Interconnect cable with earthing wire, 4x RCA phono plugs.
PRO-JECT PHONO · CATALOGUE web2013
15
PRO-JECT AUDIO SYSTEMS a division of Audio Tuning Vertriebs GmbH · Margaretenstraße 98 · A-1050 Wien, AUSTRIA
Phone: +43 1 5448580 · Fax: +43 1 5448580-33 · e-mail: [email protected] · www.project-audio.com
© Pro-Ject Audio Systems web-2013, English version
technical data without engagement
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement