advertisement
G E N U I N E M O T O R P A R T S & A C C E S S O R I E S
2 0 1 5
CONTROLS
Get a grip on style with custom controls from hand to foot. A new handlebar can make all the difference in rider comfort, while grips, hand controls, footpegs, and mirrors can provide the extra styling touches you’re looking for.
Not all products are available in all countries – please consult your dealer for details.
561
562
CONTROLS
Hand Grips
AT ARM’S REACH
From a rider’s perspective, the hand controls are one of the most visual parts of the bike. They are the first thing you touch when you drop into the saddle, and what you see every mile you ride. That makes your controls a prime candidate for special treatment. Designed to put an integrated look just a few wrench turns away, installing one of our hand and foot control collections is a solid first step to an all-out custom journey.
Not all products are available in all countries – please consult your dealer for details.
A. GET-A-GRIP HAND GRIPS – CHROME
A. GET-A-GRIP HAND GRIPS – BLACK
CONTROLS
563
Hand Grips
A. GET-A-GRIP™ HAND GRIPS
Dressed in tactified rubber for superior traction, these elegant hand grips provide a positive connection to the controls in wet or dry weather. The soft touch cross-hatched rubber surface feels good against both gloved and bare skin and the “thicker in the middle” profile forms a natural fit with your closed fist.
Shaped for maximum comfort, Get-A-Grip™ hand grips are available in your choice of standard or magnum diameters to comfortably accommodate almost any size hand. And you don’t need to sacrifice style for comfort. Designed to accent any customizing direction, the mirror-chrome or gloss black finishes complement both traditional and contemporary looks.
The easy-to-install “glueless” design allows you to remove the grips for service without damage.
Fits ’96-later VRSC™, XL, XR, Dyna models.
® , Softail ® (except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07 Touring
56100007
Chrome, Standard 1.5" Diameter.
56100009
Chrome, Magnum 1.6" Diameter.
56100008
Black, Standard 1.5" Diameter.
56100010
Black, Magnum 1.6" Diameter.
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
56100015
Chrome, Magnum 1.6" Diameter.
56100036
Black, Magnum 1.6" Diameter.
B. NOSTALGIC HAND GRIPS – WHITE
Comfortable nostalgic hourglass style with a chrome accent ring and a molded-in “Harley-Davidson” logo. These rubber grips were inspired by Harley-Davidson
®
motorcycles of the
1940s. White hand grips complement the style of a classic ride and lend a touch of tradition to the hot “bobber” look.
56100054
Fits ’96-later VRSC, XL, XR, Dyna, Softail (except FLSTSE2/3,
FLSTNSE and FXSBSE) and ’96-’07 Touring models.
C. NOSTALGIC HAND GRIPS – BLACK
Comfortable nostalgic hourglass style with a chrome accent ring and a molded-in “Harley-Davidson” logo. These rubber grips were inspired by Harley-Davidson motorcycles of the
1940s.
56275-96B
Fits ’96-later VRSC, XL, XR, Dyna, Softail (except FLSTSE2/3,
FLSTNSE and FXSBSE) and ’96-’07 Touring models.
56275-08
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. NOSTALGIC HAND GRIPS – WHITE
C. NOSTALGIC HAND GRIPS – BLACK
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
564
CONTROLS
Hand Grips – Heated
HEATED HAND GRIPS
Keep comfortable on those cool mornings or frigid night rides.
Warm hands have a major impact on overall body comfort and sometimes gloves just aren’t enough. These thermostatically controlled grips feature variable heat settings controlled with a military grade resistor and use automatic temperature monitoring to adjust to ambient temperatures. With both hands on the grips, they will remain at a constant temperature regardless of changes in outside temperature. The selfcontained control circuit and control knob means you have no additional switches or controller boxes to mount and the grips are switched on/off with the ignition to avoid draining your battery. The “glueless” grip design allows grip removal if you change handlebars or motorcycles.
A. HEATED HAND GRIPS – SLIPSTREAM
Slipstream Grips have been thermally mapped to provide a more uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides.
56100027
Fits ’08-later Touring and Trike models (except CVO™). ’14later Touring and Trike models require separate purchase of
Electrical Connection Kit P/N 69200722. Not for use with internally wired handlebars.
56100030
Fits ’96-later VRSC™, XL, XR, Dyna ® , Softail ® (except
FLSTNSE, FLSTSE2/3, FXDB and FXSBSE) and ’96-’07
Touring models. ’14-later XL, ’12-later Dyna and ’11-later
Softail models require separate purchase of Electrical
Connection Kit P/N 72673-11. Not for use with internally wired handlebars.
B. HEATED HAND GRIPS – STREAMLINER
Complement the Streamliner look with these matching grips.
The rich black rubber provides a positive grip while riding and the chrome tri-line design will provide just the right touch of chrome. These grips have been thermally mapped to provide a more uniform heat and are designed to achieve a maximum operating temperature approximately 20° Fahrenheit warmer than previous accessory heated grips for added warmth during cold rides.
56100047
Fits ’08-later Touring and Trike models (except CVO). ’14-later
Touring and Trike models require separate purchase of
Electrical Connection Kit P/N 69200722. Not for use with internally wired handlebars.
C. HEATED HAND GRIPS – BLACK RUBBER
Original Equipment on the FLHTK Ultra Limited model, these
Black Rubber Heated Grips feature smooth surfaces and a clean design that complements any styling direction.
56100034
Fits ’08-later Touring and Trike models (except CVO). ’08-’09 models require separate purchase of jumper harness
P/N 70415-08A, connector P/N 72902-01BK and terminal pin P/N 72990-01 (qty 2). See instruction sheet for details.
Not for use with internally wired handlebars.
A. HEATED HAND GRIPS – SLIPSTREAM
B. HEATED HAND GRIPS – STREAMLINER
C. HEATED HAND GRIPS – BLACK RUBBER
D. CONTOURED HEATED HAND GRIPS
D. CONTOURED HEATED HAND GRIPS D. FLAME HEATED HAND GRIPS
CONTROLS
565
Hand Grips – Heated
D. HEATED HAND GRIPS
Keep comfortable on those cool morning or frigid night rides.
Warm hands have a major impact on overall body comfort and sometimes gloves just aren’t enough. These thermostatically controlled grips have variable heat settings and automatic temperature monitoring to adjust to changing ambient temperatures. With both hands in place, the grips remain at a constant temperature regardless of changes in outside temperatures. The self-contained control circuit and control knob means you have no additional switches or controller boxes to mount and the grips are switched on/off with the ignition to avoid draining your battery. The “glueless” grip design allows grip removal if you change handlebars or motorcycles.
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except FLSTNSE,
FLSTSE2/3, FXDB and FXSBSE) and ’96-’07 Touring models.
’14-later XL, ’12-later Dyna and ’11-later Softail models require separate purchase of Electrical Connection Kit P/N 72673-11.
Not for use with internally wired handlebars.
56512-02C
Contoured.
56047-03C
Flame.
56926-05A
Willie G Skull.
56196-03C
Chrome and Rubber – Small.
56174-03C
Chrome and Rubber – Large.
56619-03B
Nostalgic.
56750-04B
Stealth.
Fits ’08-later Touring and Trike models (except CVO™).
’14-later Touring models require separate purchase of
Electrical Connection Kit P/N 69200722. Not for use with internally wired handlebars.
56512-08A
Contoured.
56047-08A
Flame.
56926-08A
Willie G Skull.
56196-08A
Chrome and Rubber – Small.
D. WILLIE G SKULL HEATED HAND GRIPS D. CHROME AND RUBBER HEATED HAND GRIPS
D. NOSTALGIC HEATED HAND GRIPS D. STEALTH HEATED HAND GRIPS
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
566
CONTROLS
Hand Grip & Foot Control Collections
EDGE CUT COLLECTION
Live your life on the edge. The Edge Cut Collection features a crisp anodized finish that is machined to expose the highlights of raw aluminum. The contrasting cut back look makes a powerful visual statement and works great with both traditional and contemporary customizing styles.
A. EDGE CUT HAND GRIPS
The hand grips are a comfortable 1.5" diameter and the machined slots and narrow rubber bands offer plenty of traction, with or without gloves. Glueless design permits removal for servicing without damage.
57454-10
Fits ’96-later VRSC™, XL, XR, Dyna ® , Softail ® (except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
57457-10
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. EDGE CUT FOOTPEGS
The slim footpeg design allows a comfortable pivot point and the wide surface and narrow rubber bands hold your boots firmly in place.
49312-10
Footpegs.
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200T,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
50500030
Footpegs with Styled Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C,
’10-later XL1200X, ’08-’11 FXCW, FXCWC and ’11-later FXS and FXSB models.
Shown with:
EDGE CUT SHIFTER PEG
Shifter pegs feature a slim design for easy access and narrow rubber bands that protect your boot toe from abrasion during shifting.
34671-10
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. EDGE CUT BRAKE PEDAL PADS
Available in two sizes, the brake pedal pads feature deep surface grooves and narrow rubber bands for traction during application.
41449-10
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42847-10
Small.
Fits ’15-later XG, ’84-later FX Softail (except FXSTDSE) and
’93-later Dyna models equipped with forward controls.
D. EDGE CUT FOOTBOARD INSERT KITS
Machined from billet aluminum, these footboard inserts retain the cast-in vibration isolation found on Original Equipment footboards. The over-molded rubber provides both comfort and traction while riding. Kit includes right and left insert.
54187-10
Rider – Traditional Shape.
Fits models with traditional-shaped rider footboards.
54196-10
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
A. EDGE CUT HAND GRIPS
B. EDGE CUT FOOTPEGS AND SHIFTER PEG C. EDGE CUT BRAKE PEDAL PADS
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
D. EDGE CUT RIDER FOOTBOARD INSERTS –
TRADITIONAL SHAPE (SHOWN WITH
LARGE EDGE CUT BRAKE PEDAL PAD)
D. EDGE CUT PASSENGER FOOTBOARD
INSERTS – TRADITIONAL SHAPE
E. BURST HAND GRIPS
NEW
F. BURST FOOTPEGS AND SHIFTER PEG G. BURST BRAKE PEDAL PADS
NEW
NEW
CONTROLS
Hand Grip & Foot Control Collections
567
THE BURST COLLECTION – CONTROLS
Split with tradition. The Burst Collection takes your ride in a new hard-edged direction. A rich mixture of tuxedo black, satin aluminum and chrome finishes, each component in this complete collection features a black-filled Bar & Shield logo to tie the look together. The resulting combination of contrasting edges makes a powerful visual statement that complements both classic and contemporary customizing styles. The Burst
Collection components create an impact all by themselves, but can also be seamlessly combined with edge cut and other gloss black accessories to complete the look.
E. BURST HAND GRIPS
The easy-to-install hand grips are a comfortable 1.6" diameter and feature a “glueless” design that can be removed for service without damage.
56100101
Fits ’96-later VRSC™, XL, XR, Dyna
®
and Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07 Touring models.
56100098
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
F. BURST FOOTPEGS
Round footpeg design allows a comfortable pivot point and the wide surface and large diameter end cap keep your boot in place. Rectangular footpeg rotation is adjustable for position, so your feet ride on the rubber treads whether used as a rider, passenger or highway peg.
33600059
Footpegs – Round.
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200V,
XL1200X, ’07-’10 XL883L, ’11-later XL1200C, XL1200T and
’08-’13 XR models).
50500367
Footpegs – Rectangular.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C,
XL1200T and ’08-’13 XR models).
50500441
Footpegs with Styled Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C, ’10later XL1200X, ’08-’11 FXCX, FXCWC and ’11-later FXS and
FXSB models.
Shown with:
BURST SHIFTER PEG
These black anodized, machined shifter pegs add a unique, custom style. Easy to install and features rubber backing to protect the toe of your boot from scuffing.
33600032
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
G. BURST BRAKE PEDAL PAD
Styled to complement the distinctive black and satin aluminum look of the Burst Collection, this easy-to-install brake pedal pad completes the clean, custom billet look.
50600104
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
50600140
Small.
Fits ’15-later XG, ’84-later FX Softail (except FXSTDSE) and
’93-later Dyna models equipped with forward controls.
H. BURST FOOTBOARD KITS
Long and lean, these half-shield shaped footboards add a unique, custom style to your ride. The kit includes black anodized footboard pans and vibration-isolated Burst Collection inserts. The high-traction black rubber cross-hatch inserts feature an embossed Bar & Shield logo and are set into a machined black and aluminum surround. Footboards are easy to install.
50500244
Rider.
Fits ’12-later Dyna FLD and ’86-later FL Softail (except FLS and FLSTFB) Touring and Trike models (except FLHTKL and
FLHTCUL).
50500245
Passenger.
Fits ’06-later Dyna, ’00-later Softail and ’86-later Touring models equipped with passenger footboard supports. Does not fit Trike models.
H. BURST RIDER FOOTBOARD H. BURST PASSENGER FOOTBOARD
Not all products are available in all countries – please consult your dealer for details.
568
CONTROLS
Hand Grip & Foot Control Collections
SLIPSTREAM COLLECTION
Go with the flow. The rich mirror-finish chrome surfaces and contrasting thick black pads set the tone for the complete
Slipstream Collection. The design features stylish aeroinspired spears deeply embedded in the surface and squareshouldered rubber pads for contemporary looks and added traction.
A. SLIPSTREAM HAND GRIPS
Easy-to-install hand grips are a comfortable 1.5" diameter and feature a “glueless” design that can be removed for service without damage.
56100029
Fits ’96-later VRSC™, XL, XR, Dyna ® , Softail ® (except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56100028
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. SLIPSTREAM FOOTPEGS
These easy-to-install footpegs feature a styled back surface so the pegs look great in the extended or folded position.
50500091
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
50500262
Footpegs with Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C, ’10later XL1200X, ’08-’11 FXCW, FXCWC and ’11-later FXS and
FXSB models.
Shown with:
SLIPSTREAM SHIFTER PEG
This easy-to-install Shifter Peg is adjustable for proper angle and comfort and features a rubber backing to protect the toe of your boot from scuffing during shifting.
33600008
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. SLIPSTREAM BRAKE PEDAL PADS
Available in two sizes, these easy-to-install brake pedal pads complete the stylish look of the Slipstream Collection.
50600037
Small.
Fits ’84-later FX Softail models (except FXSTDSE) and ’93later Dyna models equipped with forward controls.
50600040
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
D. SLIPSTREAM FOOTBOARD INSERT KITS
These footboard inserts retain the cast-in vibration isolation found on Original Equipment footboards and the thick rubber pads provide traction and protect the brilliant chrome surround. Kit includes right and left insert.
50500093
Rider – Traditional Shape.
Fits ’12-later Dyna FLD and ’86-later Softail, Touring and Trike models equipped with traditional-shaped rider footboards.
50500096
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
50500089
Rider – Swept Wing Shape.
Fits ’12-later Dyna FLD and ’86-later Softail, Touring and Trike models equipped with Swept Wing-shaped rider footboards.
50500090
Passenger – Swept Wing Shape.
Fits ’06-later Dyna, ’00-later Softail (except FLS) and ’86later Touring models equipped with Swept Wing-shaped passenger footboards. Does not fit Trike models. If installed on models equipped with Passenger Footboard Support kit
P/N 50399-07A, footboards will not remain in flipped up position.
A. SLIPSTREAM HAND GRIPS
B. SLIPSTREAM FOOTPEGS AND SHIFTER PEG
D. SLIPSTREAM RIDER FOOTBOARD INSERTS –
TRADITIONAL (SHOWN WITH LARGE
SLIPSTREAM BRAKE PEDAL PAD)
C. SLIPSTREAM BRAKE PEDAL PADS
D. SLIPSTREAM PASSENGER FOOTBOARD
INSERTS – TRADITIONAL
Not all products are available in all countries – please consult your dealer for details.
D. SLIPSTREAM RIDER FOOTBOARD INSERTS –
SWEPT WING (SHOWN WITH LARGE
SLIPSTREAM BRAKE PEDAL PAD)
D. SLIPSTREAM PASSENGER FOOTBOARD
INSERTS – SWEPT WING
E. TRIBAL HAND GRIPS
F. TRIBAL FOOTPEGS AND SHIFTER PEG
H. TRIBAL RIDER FOOTBOARD INSERTS –
HALF MOON (SHOWN WITH LARGE TRIBAL
BRAKE PEDAL PAD)
G. TRIBAL BRAKE PEDAL PADS
H. TRIBAL PASSENGER FOOTBOARD
INSERTS – HALF MOON
CONTROLS
Hand Grip & Foot Control Collections
569
TRIBAL COLLECTION
Tribal art adds an element of ancient mystery, with a monochrome palette and simple lines that transform into a totem meant to be worn proudly. The design features smooth black rubber surfaces that rise above the cast-in recesses of the jet black shell, adding depth and dimension to the collection.
E. TRIBAL HAND GRIPS
The easy-to-install hand grips are a comfortable 1.5" diameter and feature a “glueless” design that can be removed for service without damage.
56254-09
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56257-09
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
F. TRIBAL FOOTPEGS
Footpeg rotation is adjustable for position, so your feet ride on the rubber pad whether used as a rider, passenger or highway peg. Kit includes left and right peg.
51376-09
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
Shown with:
TRIBAL SHIFTER PEG
The easy-to-install Shifter Peg is adjustable for comfort and the rubber backing protects the toe of your boot from scuffing during shifting.
34669-09A
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
G. TRIBAL BRAKE PEDAL PADS
This easy-to-install Brake Pedal Pad complements the Tribal
Collection for a complete custom look.
42560-09
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42008-09
Small.
Fits ’84-later FX Softail (except FXSTDSE) and ’93-later Dyna models equipped with forward controls.
H. TRIBAL FOOTBOARD INSERT KITS
Easy-to-install footboard kits retain the Original Equipment cast-in vibration isolation for a fatigue-free ride. Kit includes left and right insert.
50269-09
Rider – Half-Moon Shape.
Fits ’86-later Softail models equipped with Half Moonshaped rider footboards.
50535-09
Passenger – Half-Moon Shape.
Fits ’06-later Dyna, ’00-later Softail and ’86-later Touring models equipped with Half Moon-shaped passenger footboards. Does not fit Trike models.
50753-10
Rider – Swept Wing Shape.
Fits ’12-later Dyna FLD and ’86-later Softail, Touring and Trike models equipped with Swept Wing-shaped rider footboards.
50760-10
Passenger – Swept Wing Shape.
Fits ’06-later Dyna, ’00-later Softail and ’86-later Touring models equipped with Swept Wing-shaped passenger footboards. Does not fit Trike models.
H. TRIBAL RIDER FOOTBOARD INSERTS –
SWEPT WING (SHOWN WITH LARGE TRIBAL
BRAKE PEDAL PAD)
H. TRIBAL PASSENGER FOOTBOARD
INSERTS – SWEPT WING
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
570
CONTROLS
Hand Grip & Foot Control Collections
STEALTH COLLECTION
Just like a Stealth fighter, you may not hear it coming, but you’ll definitely know when it arrives. The mirror-chrome finish, deep tapered grooves and thin black rubber tread make the
Stealth Collection anything but invisible.
A. STEALTH HAND GRIPS
These hand grips feature a smooth contoured shape, “ballmilled” grooves, raised rubber tread and a “glueless” design that allows removal without damage.
56729-04
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56729-08
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. STEALTH FOOTPEGS
Footpeg rotation is adjustable for position, so your feet ride on the rubber treads whether used as a rider, passenger or highway peg. Kit includes left and right peg.
50359-04
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
Shown with:
STEALTH SHIFTER PEG
This easy-to-install shifter peg can be rotated to a comfortable position and the smooth back protects the toe of your boot from wear while shifting.
34664-04
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. STEALTH BRAKE PEDAL PADS
Available in two sizes to fit most Harley-Davidson
®
motorcycles, these easy-to-install brake pedal pads complement the
Stealth Collection pegs and footboard inserts for a complete look.
42555-04
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42650-08
Small.
Fits ’84-later FX Softail models (except FXSTDSE) and
’93-later Dyna models equipped with forward controls.
D. STEALTH FOOTBOARD INSERTS
The Footboard Insert Kit features “ball-milled” Harley-
Davidson script logo, tapered grooves, raised rubber tread and the distinct Swept Wing footboard shape.
50202-04
Rider – Swept Wing.
Fits ’12-later Dyna FLD and ’86-later Softail, Touring and Trike models equipped with Swept Wing-shaped rider footboards.
50358-04
Passenger – Swept Wing.
Fits models equipped with Swept Wing Passenger
Footboards. Does not fit Softail or Trike models. Models equipped with accessory derby covers requires separate purchase of Passenger Footboard Support Kit P/N 52714-04.
A. STEALTH HAND GRIPS
B. STEALTH FOOTPEGS AND SHIFTER PEG C. STEALTH BRAKE PEDAL PADS
Not all products are available in all countries – please consult your dealer for details.
D. STEALTH RIDER FOOTBOARD INSERTS –
SWEPT WING (SHOWN WITH
LARGE STEALTH BRAKE PEDAL PAD)
D. STEALTH PASSENGER FOOTBOARD INSERTS –
SWEPT WING
E. SILENCER HAND GRIPS
E. SILENCER HAND GRIPS
2
3
1
4
F. SILENCER FOOTPEGS AND SHIFTER PEG
CONTROLS
Hand Grip & Foot Control Collections
571
THE SILENCER COLLECTION
Make your own noise. Unique electroless nickel plating provides this collection with a warm, burnished finish that looks like you’ve been twisting this throttle for years. The warm look of the nickel will complement both bright and satin paint colors and looks right when paired with the black Original
Equipment hand controls. The precision drilled surfaces bite against the palm of your glove and boot sole for positive grip and provide the gun barrel look.
E. SILENCER HAND GRIPS
Hand grips are a comfortable 1.4" diameter for a compact custom look and the “glueless” design allows easy removal for service without damage.
55869-10
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
F. SILENCER FOOTPEGS AND SHIFTER PEG
These small-diameter footpegs offer the ideal pivot point to operate the brake and shift levers and the wide surface provides room to rest your boot.
1. 50056-10
Footpegs.
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200T,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
2. 50039-10
Footpegs with Wear Peg.
Fits ’07-’10 XL883L, ’07-later XL883N, XL1200N, XL1200T and ’08-’13 XR models.
3. 50500025
Footpegs with Styled Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C,
’10-later XL1200X, ’08-’11 FXCW and FXCWC and ’11-later
FXS and FXSB models.
4. 35286-10
Shifter Peg.
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
G. SILENCER BRAKE PEDAL PAD
The easy-to-install compact brake pedal pad completes the custom Silencer look. Includes mounting hardware.
48990-10
Small.
Fits ’15-later XG, ’84-later FX Softail models (except
FXSTDSE) and ’93-later Dyna models equipped with Forward
Controls.
G. SILENCER BRAKE PEDAL PADS G. SILENCER BRAKE PEDAL PAD
(SHOWN WITH SILENCER FOOTPEG
WITH STYLED WEAR PEG)
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
572
CONTROLS
Hand Grip & Foot Control Collections
THE DIAMOND BLACK COLLECTION
Shroud your bike in mystery. This blacked-out hand and foot control collection features distinctive knurled surfaces that expose the raw billet aluminum for a dramatic contrast.
Designed to age and “break-in” like a pair of comfortable stone-washed jeans, the satin black finish will complement both high-gloss and “denim” paint colors. The narrow rubber bands and the knurled surfaces provide a positive grip.
A. DIAMOND BLACK HAND GRIPS
Hand grips are a comfortable 1.5" diameter and feature “glueless” installation that can be easily removed for service without damage.
56405-08
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56746-08
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. DIAMOND BLACK FOOTPEGS AND SHIFTER PEG
The slim footpeg design allows a comfortable pivot point and the wide surface and large diameter end cap keep your boot in place.
1. 50113-10
Footpegs – Large Diameter.
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
2. 50911-08A
Footpegs – Small Diameter.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200T,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
3. 50695-08A
Footpegs with Wear Peg.
Fits ’07-’10 XL883L, ’07-later XL883N, XL1200N, XL1200T and ’08-’13 XR models.
4. 50500035
Footpegs with Styled Wear Peg.
Fits ’12-later XL1200V, ’11-later XL883L and XL1200C,
’10-later XL1200X, ’08-’11 FXCW and FXCWC and ’11-later
FXS and FXSB models.
5. 34690-08
Shifter Peg.
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. DIAMOND BLACK BRAKE PEDAL PADS
Available in two sizes, these brake pedal pads complete the clean, custom black billet look.
41850-08
Small.
Fits ’15-later XG, ’84-later FX Softail models (except
FXSTDSE) and ’93-later Dyna models equipped with forward controls.
46718-08
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
D. DIAMOND BLACK FOOTBOARD INSERT KIT
Machined from billet aluminum, these footboard inserts retain the cast-in vibration isolation found on the Original Equipment footboards. Kit includes right and left insert.
50549-08
Rider – Traditional Shape.
Fits models with traditional-shaped rider footboards.
50627-08
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
2
1
A. DIAMOND BLACK HAND GRIPS
5
3
4
B. DIAMOND BLACK FOOTPEGS
AND SHIFTER PEG
C. DIAMOND BLACK BRAKE PEDAL PADS
Not all products are available in all countries – please consult your dealer for details.
D. DIAMOND BLACK RIDER FOOTBOARD
INSERT KIT – TRADITIONAL SHAPE
(SHOWN WITH BRAKE PEDAL PAD)
D. DIAMOND BLACK PASSENGER FOOTBOARD
INSERT KIT – TRADITIONAL SHAPE
E. NARROW BAND BILLET HAND GRIPS
F. NARROW BAND BILLET FOOTPEGS AND
SHIFTER PEG
G. NARROW BAND BILLET BRAKE PEDAL PADS
CONTROLS
Hand Grip & Foot Control Collections
573
THE NARROW BAND BILLET COLLECTION
A raw look wrapped in class. This hand and foot control collection features a deep knurled surface for a positive grip and slim black rubber stripes over the chrome finish for stylish contrast.
The mirror-chrome finish over the knurled surface scatters light to grab the attention of fellow riders. These components look great next to either chrome or black controls and help you establish your own customizing direction.
E. NARROW BAND BILLET HAND GRIPS
Continuing the distinctive knurled chrome and rubber band look of the billet footpegs, these hand grips provide a clean, custom look. The end caps are adorned with a Bar & Shield logo.
56443-00A
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
F. NARROW BAND BILLET FOOTPEGS AND SHIFTER PEG
These high-quality, dramatic custom pegs are machined from premium 6061-T6 aluminum, then polished and chromeplated for long-lasting good looks.
50978-99A
Footpegs – Small Diameter.
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200T,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
50976-99A
Footpegs – Large Diameter.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
Xl1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
49254-99
Shifter Peg.
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
G. NARROW BAND BILLET BRAKE PEDAL PADS
Designed to complement the distinctive knurled chrome and rubber look of the Narrow Band footpegs and hand grips, these brake pedal pads complete the clean, custom billet look.
42623-00
†
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42629-00 †
Small.
Fits ’15-later XG, ’84-later FX Softail models (except
FXSTDSE) and ’93-later Dyna models equipped with forward controls.
H. NARROW BAND BILLET FOOTBOARD INSERT KITS
These rider and passenger footboard inserts complete the clean, custom billet look. Machined from billet aluminum and combined with high-durability rubber, these inserts retain the cast-in vibration isolation found in the stock footboard inserts.
Kit includes right and left insert.
51011-01
Rider – Traditional Shape.
Fits models with traditional-shaped rider footboards.
51017-01
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
†
H. NARROW BAND BILLET RIDER FOOTBOARD
INSERTS – TRADITIONAL SHAPE (SHOWN WITH
NARROW BAND BRAKE PEDAL PAD)
H. NARROW BAND BILLET PASSENGER
FOOTBOARD INSERTS – TRADITIONAL SHAPE
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
574
CONTROLS
Hand Grip & Foot Control Collections
CRESTED BAR & SHIELD LOGO COLLECTION
Combine classic styling with contemporary shapes for a oneof-a-kind custom look. Styled to complement the Original
Equipment rider footboard on the Softail
®
Deluxe model, the Crested Bar & Shield Logo Collection adds an “art deco” touch to any model. Rimmed with a smooth band of chrome, the contrasting vivid black rubber pad features a deep slotted design that runs parallel to the length of the motorcycle.
Interrupted only by an embossed Bar & Shield logo, the molded rubber pad offers a comfortable and easy-to-clean surface.
A. CONTOURED CUSTOM HAND GRIPS
These grips combine a classic hourglass shape for comfort with the style for the new century. The black molded rubber surface with Bar & Shield logo gives plenty of grip, while the chrome end caps add a smooth organic touch.
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07 Touring models.
56799-04
Small 1.3" Diameter.
56459-01A
Medium 1.5" Diameter.
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
56459-08
Medium 1.5" Diameter.
B. CRESTED BAR & SHIELD LOGO FOOTPEG KIT
50576-05
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
Shown with:
CRESTED BAR & SHIELD LOGO SHIFTER PEG
33946-05
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. CRESTED BAR & SHIELD LOGO BRAKE PEDAL PADS
42700-05
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42701-05
Small.
Fits ’84-later FX Softail (except FXSTDSE) and ’93-later Dyna models equipped with forward controls.
D. TAPERED RIDER FOOTBOARD KIT WITH CRESTED
BAR & SHIELD LOGO INSERT
Long and lean, the tapered design of these footboards allows maximum flexibility in foot placement for added comfort on long rides. Kit includes left and right tapered footboard pans and rubber isolated deluxe inserts with smooth chrome surround. The inserts feature a slotted rubber design with embossed Bar & Shield logo. Original Equipment on Softail
Deluxe models.
50634-05
Fits ’86-later FL Softail models.
E. TAPERED PASSENGER FOOTBOARD KIT WITH
CRESTED BAR & SHIELD LOGO INSERT
Styled to match the rider footboards on the Softail Deluxe model, these Tapered Passenger Footboards feature a crested
Bar & Shield logo rubber pad surrounded by a chrome accent.
The footboard pan is chrome-plated throughout to add a custom touch, even in the folded position.
50396-05
Fits ’86-later Touring, ’86-later Softail and ’06-later Dyna models equipped with passenger footboard supports. Does not fit Trike models.
A. CONTOURED CUSTOM HAND GRIPS
B. CRESTED BAR & SHIELD LOGO FOOTPEGS
AND SHIFTER PEG
C. CRESTED BAR & SHIELD LOGO BRAKE
PEDAL PADS
Not all products are available in all countries – please consult your dealer for details.
D. TAPERED RIDER FOOTBOARD KIT WITH
CRESTED BAR & SHIELD LOGO INSERT
(SHOWN WITH BRAKE PEDAL PAD)
E. TAPERED PASSENGER FOOTBOARD KIT WITH
CRESTED BAR & SHIELD LOGO INSERT
F. FLAME HAND GRIPS
G. FLAME FOOTPEGS AND SHIFTER PEG H. FLAME BRAKE PEDAL PADS
CONTROLS
Hand Grip & Foot Control Collections
575
FLAME COLLECTION
Styled to carry the “Flame” theme from front to back, this hot collection will get you noticed. The smooth black rubber defines the brilliant chrome “Hot Rod” flame pattern and the dimensional surface adds comfort and grip.
F. FLAME HAND GRIPS
These hot new grips will get you noticed. Smooth rubber is molded into the machined billet grip and defines the chrome
“Hot Rod” flame. The grips are simple to install and the “glueless” design allows removal without damage.
56518-02
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56518-08
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
G. FLAME FOOTPEGS
Footpeg rotation is adjustable for position, so your feet ride on the rubber treads whether used as a rider, passenger or highway peg. Kit includes left and right peg.
50312-03
Fits models with H-D
®
male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
Shown with:
FLAME SHIFTER PEG
This easy-to-install shifter peg can be rotated to a comfortable position and the smooth back protects the toe of your boot from wear while shifting.
34617-03
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
H. FLAME BRAKE PEDAL PADS
Available in two sizes to fit most Harley-Davidson
®
motorcycles, these easy-to-install brake pedal pads complement the
Flame Collection pegs and footboard inserts for a complete look.
42554-03
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42841-03
Small.
Fits ’84-later FX Softail models (except FXSTDSE) and
’93-later Dyna models equipped with forward controls.
I. FLAME FOOTBOARD INSERTS
Easy-to-install footboard kits retain the Original Equipment cast-in vibration isolation for a fatigue-free ride. Kit includes left and right insert.
50295-02
Rider – Traditional Shape.
Fits models with traditional-shaped rider footboards.
50310-02
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
I. FLAME RIDER FOOTBOARD INSERTS –
TRADITIONAL SHAPE (SHOWN WITH LARGE
FLAME BRAKE PEDAL PAD)
I. FLAME PASSENGER FOOTBOARD INSERTS –
TRADITIONAL SHAPE
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
576
CONTROLS
Hand Grip & Foot Control Collections
WILLIE G SKULL COLLECTION
The deep black rubber pads are set against a brilliant polished and chrome-plated field to yield the dramatic appearance of the Skull Collection.
A. WILLIE G SKULL HAND GRIPS
Contrasting the chrome sinister skull logo surrounded by
“Harley-Davidson” script, the raised rubber pads add positive grip and comfort for the long haul. Easy to install, these grips feature a “glueless” design that allows removal without damage.
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07 Touring models.
56751-04
56740-04
56741-04
Small 1.3" Diameter.
Medium 1.5" Diameter.
Large 1.6" Diameter.
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
56740-08
Medium 1.5" Diameter.
B. WILLIE G SKULL FOOTPEGS
Footpeg rotation is adjustable for position, so your feet ride on the rubber treads whether used as a rider, passenger or highway peg. Kit includes left and right peg.
50370-04
Fits models with H-D
®
male mount style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
Shown with:
WILLIE G SKULL SHIFTER PEG
This easy-to-install shifter peg can be rotated to a comfortable position and the smooth back protects the toe of your boot from wear while shifting.
34689-04
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
C. WILLIE G SKULL BRAKE PEDAL PADS
Available in two sizes to fit most Harley-Davidson ® motocycles, these easy-to-install brake pedal pads complement Willie
G Collection pegs and footboard inserts for a complete look.
42711-04
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42710-04
Small.
Fits ’84-later FX Softail (except FXSTDSE) and ’93-later Dyna models equipped with forward controls.
D. WILLIE G SKULL HEEL REST PEGS
34699-04
Fits models equipped with Rider Footpeg Heel Rests
P/N 50227-01.
E. WILLIE G SKULL FOOTBOARD INSERTS
Easy-to-install footboard kits retain the Original Equipment cast-in vibration isolation for a fatigue-free ride. Kit includes left and right insert.
50704-04
Rider – Swept Wing Shape.
Fits ’12-later Dyna FLD and ’86-later Softail and Touring models equipped with Swept Wing-Shaped rider footboards.
Does not fit Trike models.
50710-04
Rider – Traditional Shape.
Fits models with traditional-shaped rider footboards.
50713-04
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
A. WILLIE G SKULL HAND GRIPS
B. WILLIE G SKULL FOOTPEGS
AND SHIFTER PEG
D. WILLIE G SKULL HEEL REST PEGS
C. WILLIE G SKULL BRAKE PEDAL PADS
E. WILLIE G SKULL RIDER FOOTBOARD
INSERTS – SWEPT WING SHAPE
Not all products are available in all countries – please consult your dealer for details.
E. WILLIE G SKULL RIDER FOOTBOARD
INSERTS – TRADITIONAL SHAPE
(SHOWN WITH WILLIE G BRAKE PEDAL PAD)
E. WILLIE G SKULL PASSENGER FOOTBOARD
INSERTS – TRADITIONAL SHAPE
F. NOSTALGIC HAND GRIPS – BLACK
G. NOSTALGIC SHIFTER PEG H. NOSTALGIC BRAKE PEDAL PAD
CONTROLS
Hand Grip & Foot Control Collections
577
NOSTALGIC COLLECTION
With a serious nod to the past, the Nostalgic Collection applies a fresh twist to a classic design. The chrome surround and raised rubber shapes outline the historic round shield and name band that has been at the center of Harley-Davidson
®
Original Equipment footboards for years. The classic look extends to the matching hand grips that feature the classic
“bicycle grip” shape. This easy-to-install collection is the ideal match for your traditional styling direction.
F. NOSTALGIC HAND GRIPS – BLACK
Comfortable nostalgic hourglass style with a chrome accent ring and a molded-in “Harley-Davidson” logo. These rubber grips were inspired by Harley-Davidson
®
motorcycles of the
1940s.
56275-96B
Fits ’96-later VRSC™, XL, XR, Dyna ® , Softail ® (except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07
Touring models.
56275-08
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
G. NOSTALGIC SHIFTER PEG
This easy-to-install shifter peg can be rotated to a comfortable position and the smooth back protects the toe of your boot from wear while shifting.
34627-99
Fits all models (except ’06 later VRSC models with forward controls and ’08-’13 XR models).
H. NOSTALGIC BRAKE PEDAL PAD
These easy-to-install brake pedal pads complement the
Nostalgic Collection pegs and footboard inserts for a complete look.
44248-96
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
I. NOSTALGIC FOOTBOARD INSERT KITS
Quick, easy replacement of stock rubber footboard insert.
Made from stamped chrome-plated steel and high-durability rubber. Retains cast-in vibration isolation found in stock footboard inserts. Kit includes left and right insert.
50187-96
Rider – Traditional Shape.
Fits ’12-later Dyna FLD and ’86-later FL Softail, Touring and
Trike models equipped with traditional-shaped rider footboards.
50190-96
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
50051-09
Rider – Half-Moon Shape.
Fits ’86-later Softail models equipped with Half Moonshaped rider footboards.
50027-09
Passenger – Half-Moon Shape.
Fits ’06-later Dyna, ’00-later Softail and ’86-later Touring models equipped with Half Moon-shaped passenger footboards. Does not fit Trike models.
I. NOSTALGIC RIDER FOOTBOARD INSERTS –
TRADITIONAL SHAPE (SHOWN WITH
BRAKE PEDAL PAD)
I. NOSTALGIC PASSENGER FOOTBOARD
INSERTS – TRADITIONAL SHAPE
I. NOSTALGIC RIDER FOOTBOARD INSERTS –
HALF-MOON SHAPE (SHOWN WITH
NOSTALGIC BRAKE PEDAL PAD)
I. NOSTALGIC PASSENGER FOOTBOARD
INSERTS – HALF-MOON SHAPE
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
578
CONTROLS
Hand Grip & Foot Control Collections
CHROME AND RUBBER COLLECTION
Chrome and rubber both have their distinct places in the world of motorcycle styling. It seemed natural to bring the two together to create this unique collection.
A. CHROME AND RUBBER HAND GRIPS
Designed to match the Chrome and Rubber Footboard Inserts and Brake Pedal Pads, these grips are made from an injected rubber molding process that combines chromed steel and durable rubber.
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
(except
FLSTSE2/3, FLSTNSE and FXSBSE) and ’96-’07 Touring models.
56246-96A
Small.
56263-96A
Large.
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
56246-08
56263-08
Small.
Large.
Fits ’82-’95 models. Kit includes adhesive required for installation.
56241-96
Small.
B. CHROME AND RUBBER CUSTOM FOOTPEGS AND
SHIFTER PEG
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’15-later XG, ’07-later XL883L,
XL883N, XL1200N, XL1200T, XL1200V, XL1200X, ’11-later
XL1200C, ’08-later FXCW, FXCWC, FXS, FXSB, FXSBSE,
’06-later Dyna and ’03-later Sportster
®
models).
50500-03
Oversize.
Fits all models in passenger and highway peg positions.
50130-95A
Large.
50131-95A
Small.
Fits all models (except ’06-later VRSC models with forward controls and 08-’13 XR models).
34608-95
Shifter Peg.
C. CHROME AND RUBBER BRAKE PEDAL PADS
42478-95
†
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail and ’80-later
Touring and Trike models.
42476-95 †
Small.
Fits ’84-later FX Softail models (except FXSTDSE) and
’93-later Dyna models equipped with forward controls.
D. CHROME AND RUBBER FOOTBOARD INSERTS
50176-95
Rider – Traditional Shape.
Fits ’12-later Dyna FLD and ’86-later FL Softail, Touring and
Trike models equipped with traditional-shaped rider footboards.
50177-95
Passenger – Traditional Shape.
Fits models equipped with traditional-shaped passenger footboards.
A. CHROME AND RUBBER HAND GRIPS
B. CHROME AND RUBBER CUSTOM FOOTPEGS
AND SHIFTER PEG
C. CHROME AND RUBBER BRAKE PEDAL PADS
†
Not all products are available in all countries – please consult your dealer for details.
D. CHROME AND RUBBER RIDER FOOTBOARD
INSERTS – TRADITIONAL SHAPE
(SHOWN WITH BRAKE PEDAL PAD)
D. CHROME AND RUBBER PASSENGER
FOOTBOARD INSERTS – TRADITIONAL SHAPE
1
E. HEEL RAISER FOOTPEG KIT
F. MINI FOOTBOARD KIT
2
F. MINI FOOTBOARD KIT
3
CONTROLS
579
Hand Grip & Foot Control Collections
E. HEEL RAISER FOOTPEG KIT
Comfort and cool, clean looks in one. Heel Raiser Chrome and Rubber Footpegs provide a large surface area that lets you change foot position for maximum comfort and the foldout heel rest provides footboard-style support that relieves calf and thigh tension on the highway. The heel rest can be deployed or retracted with your boot while riding. The solegripping horizontal black rubber bands complement the mirror-chrome finish and add vibration isolation and a rich appearance to the pegs. Heel Raiser mounts to the standard
H-D style footpeg support, so it can be used in many rider and passenger applications.
50178-09
Fits H-D
®
male mount-style footpeg supports (except the rider position on mid-control models, ’02-later VRSC™,
’15-later XG, ’07-later, XL1200N, XL1200T, XL1200V, XL1200X,
’11-later XL1200C, FLS, ’08-later FXCW, FXCWC, FXS, FXSB,
FXSBSE and passenger position on Softail
®
models). Fits mid-control models in the highway peg or engine guard position on XL and Dyna
®
models. Does not fit with
Adjustable Passenger Footpeg Support P/N 50763-09 and
50787-09 or Whiskers Highway Peg Mount 50855-09 and
50865-09.
F. MINI FOOTBOARD KIT
This Mini Footboard Kit can be installed in place of traditional footpegs and provides a little additional leg support and more options to move your feet around on a long run. Mini
Footboards mount to standard H-D style footpeg supports and can be used in many rider and passenger applications. A little larger than a bicycle pedal, Footboards can be pivoted to the proper angle for maximum riding comfort. The solegripping horizontal black rubber bands complement the mirror-chrome finish and add vibration isolation and a rich appearance to the pegs. Complete the look with Shifter Pegs and Brake Pedal Pads from the Chrome and Rubber Collection.
Fits rider position:
VRSC models with forward controls (except VRSCDX and
VRSCF), ’06-earlier XL, ’07-’10 XL883, XL883R, XL883C,
XL1200C, XL1200R and ’07-’11 XL1200L, Dyna models
(except FLD) and Softail models with forward controls
(except FXCW, FXCWC, FXS, FXSB or FXSBSE).
Fits passenger position:
All models with H-D male-mount passenger peg mounts
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna and Softail models equipped with Shotgun exhaust). Softail models require separate purchase of Support Kit
P/N 50454-09.
Fits highway peg position:
All models with frame-mount or engine guard-mount highway pegs (except Whiskers Adjustable Highway Bar
P/N 50855-09 and 50865-09).
50451-09
G. CUSTOM FOOTPEGS AND SHIFTER PEG
This footpeg grouping is chrome-plated and features a zinc die-cast body with steel shaft. The black rubber pads have
“Harley-Davidson” graphics molded-in for rich detail. Allen
® wrench included.
1. 50915-90T
Footpegs – Large Diameter.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’15-later XG, ’08-later FXCW,
FXCWC, FXS, FXSB, FXSBSE, ’07-later, XL883N, XL1200N,
XL1200T, XL1200V, XL1200X, ’07-’10 XL883L, ’11-later
XL1200C and ’08-’13 XR models).
2. 50916-90T
Footpegs – Small Diameter.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’07-later XL883L, XL883N,
XL1200N, XL1200V, XL1200X, ’11-later XL1200C, ’08-later
FXCW, FXCWC, FXS, FXSB, FXSBSE, ’06-later Dyna and
’03-later Sportster
®
models).
3. 34635-90T
Custom Shifter Peg.
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
G. CUSTOM FOOTPEGS AND SHIFTER PEG
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
580
CONTROLS
Hand Grip & Foot Control Collections
THE STREAMLINER COLLECTION – HAND GRIPS
Inspired by the art-deco designs of the Streamliner era, this collection reflects the simple lines and shapes that still remain contemporary today. The rich black rubber features three raised chrome tri-line bands for contrast and a rich chrome surround to finish the look.
A. STREAMLINER HAND GRIPS
Complement the Streamliner look with these matching grips.
The rich black rubber provides a positive grip while riding and the chrome tri-line design will provide just the right touch of chrome.
56100048
Fits ’08-later Touring, Trike, FLSTSE2/3, FXSBSE and
FLSTNSE models.
B. STREAMLINER FOOTPEG KIT
Complete the streamlined look with Streamliner Footpegs. Kit includes left and right footpegs.
50211-04
Fits rider positions on ’03-earlier XL models with mid- controls and ’05-earlier Dyna ® models with mid-controls. Fits all models in passenger and highway peg positions.
Shown with:
STREAMLINER SHIFTER PEG
Complement the streamlined footpegs and footboards with this simple-to-install Shifter Peg.
34967-04
Fits all models (except ’06-later VRSC™ models with forward controls and ’08-’13 XR models).
A. STREAMLINER HAND GRIPS
C. STREAMLINER BRAKE PEDAL PAD
Complement the streamlined footpegs and footboards with this simple-to-install Brake Pedal Pad. The chrome frame surrounds a black rubber pad accented with three chrome bands for style and grip.
42712-04
Large.
Fits ’12-later Dyna FLD, ’86-later FL Softail
®
and ’80-later
Touring and Trike models.
D. STREAMLINER RIDER FOOTBOARD KIT
Add the sleek sweeping footboard design from the Street
Glide
®
to your Touring bike. Kit includes vibration-isolation footboard pads with three chrome bands, and the complete chrome-plated pans that easily bolt in place of the Original
Equipment footboards.
50631-04
Fits ’12-later Dyna FLD and ’86-later FL Softail (except FLS and FLSTFB), Touring and Trike models (except FLHTKL and
FLHTCUL).
E. STREAMLINER PASSENGER FOOTBOARD INSERT
KIT – SWEPT WING SHAPE
Styled to match the Street Glide
®
model’s Original Equipment
Streamliner Rider Footboards. Featuring vibration-isolation rubber inserts with three chrome bands, this insert is designed to fit the Swept Wing shape passenger footboard pan. Kit includes left and right side insert.
50420-05
Fits ’06-later Dyna, ’00-later Softail and ’86-later Touring models equipped with Swept Wing-shaped passenger footboards. Does not fit Trike models. If installed on models equipped with Passenger Footboard Support kit
P/N 50399-07A, footboards will not remain in flipped up position.
B. STREAMLINER FOOTPEGS AND SHIFTER PEG C. STREAMLINER BRAKE PEDAL PAD
Not all products are available in all countries – please consult your dealer for details.
D. STREAMLINER RIDER FOOTBOARD KIT
(SHOWN WITH BRAKE PEDAL PAD AND
FOOTPEG KIT)
E. STREAMLINER PASSENGER FOOTBOARD
INSERTS – SWEPT WING SHAPE
F. HAND GRIP DECORATIVE END CAPS – FLAME F. HAND GRIP DECORATIVE END CAPS – SKULL
1
2
G. O-RING FOOTPEGS AND SHIFTER PEG WITH
ETCHED BAR & SHIELD LOGO
3
2
1
H. FOOTPEGS AND SHIFTER PEG WITH
CHROME END COVER
CONTROLS
581
Hand Grip & Foot Control Collections
F. HAND GRIP DECORATIVE END CAPS
Throw some attitude onto your Smooth Leather, Custom Print
Leather or Chrome and Rubber Horizontal Hand Grips. These easy-to-install caps replace the originals and take customization to a whole new level.
Fits Contoured Chrome and Rubber Custom Hand Grips
P/N 56459-01A, Chrome and Rubber Horizontal Hand Grips
P/N 56246-96A, 56263-96A, 56241-96 and 56258-96,
Flame Hand Grips P/N 56518-02, Diamond Plate Hand
Grips P/N 56688-04 and Smooth Leather Hand Grips
P/N 56197-98A.
56676-02
56658-00
Flame End Caps.
Skull End Caps.
G. O-RING FOOTPEGS AND SHIFTER PEG WITH
ETCHED BAR & SHIELD LOGO
1. 49149-84A
Shifter Peg.
Fits all models (except ’06-later VRSC™ models with forward controls, ’08-’13 XR models or ’06-later Dyna
® models with forward controls).
2. 49128-82
Footpegs.
Fits models with H-D ® male mount-style footpeg supports
(except the rider position on ’07-later XL883L, XL883N,
XL1200N, XL1200T, XL1200V, XL1200X, ’11-later XL1200C,
’08-later FXCW, FXCWC, FXS, FXSB, FXSBSE, ’06-later Dyna and ’03-later Sportster
®
models).
H. FOOTPEGS AND SHIFTER PEG WITH CHROME
END COVER
Footpegs feature cushioned rubber tread for sure-footed comfort and the chrome end cap adds a touch of style.
1. 49117-77TB
Footpegs – Small Diameter.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’07-later XL883L, XL883N,
XL1200N, XL1200V, XL1200X, ’11-later XL1200C, ’08-later
FXCW, FXCWC, FXS, FXSB, FXSBSE, ’06-later Dyna and
’03-later Sportster models).
2. 34633-85T
Shifter Peg.
Fits all models (except ’06-later VRSC models with forward controls and ’08-’13 XR models).
3. 49500-92T
5.0" Extended Footpegs.
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200T,
XL1200V, XL1200X, ’07-’10 XL883L, ’11-later XL1200C and
’08-’13 XR models).
I. LARGE CUSHIONED FOOTPEG KIT
Large diameter footpegs feature cushioned rubber tread for sure-footed comfort.
49110-98
Fits models with H-D male mount-style footpeg supports
(except the rider position on ’08-later FXCW, FXCWC, FXS,
FXSB, FXSBSE, ’07-later XL883N, XL1200N, XL1200V,
XL1200X, ’07-’10 XL883L, ’11-later XL1200C and ’08-’13
XR models).
J. REPLACEMENT FOOTBOARD MATS
50614-91A
Fits all isolator-type footboards. Stock on ’91-’05 models.
I. LARGE CUSHIONED FOOTPEG KIT J. REPLACEMENT FOOTBOARD MATS
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
582 CONTROLS
Footboards
CUSTOM FOOTBOARDS
To add style to your ride, install custom footboard inserts that match the shape of your Original Equipment footboards. To radically change the look, select footboard pans in a new shape or finish and add coordinating inserts that highlight your custom direction.
A. SWEPT WING RIDER FOOTBOARD PANS – CHROME
Add a sleek tapered look to your footboard-equipped model.
These chrome-plated Swept Wing Pans are installed using the
Original Equipment mounts and hardware. Add your choice of
Swept-Wing Shaped footboard inserts (sold separately).
Fits ’12-later Dyna
®
FLD and ’86-later FL Softail
®
(except FLS and FLSTFB), Touring and Trike models (except FLHTKL and
FLHTCUL).
50683-04
Right.
50688-04
Left.
B. BLACK RIDER FOOTBOARD PANS
Complete the blacked-out transformation. Replace the
Original Equipment chrome footboard pans with sinister gloss black. Kit includes both the right and left pan and is installed using the Original Equipment hardware and insert pad. Custom footboard inserts are sold separately.
Fits ’12-later Dyna FLD and ’86-later FL Softail (except FLS and FLSTFB), Touring and Trike models (except FLHTKL and
FLHTCUL).
51322-08
51060-08
Traditional Shape.
Swept Wing Shape.
C. HALF-MOON RIDER FOOTBOARDS
Combine the style of the ’40s with the comfort of today. The classic half moon-shaped rider footboards are available in polished stainless steel or gloss black finish to complement your styling direction. The traditional “Harley-Davidson” rubber insert features a vibration-isolation design for a long, comfortable ride. Kit includes left and right footboard pans and matching rubber inserts.
Fits ’86-later FL Softail models.
51345-08
51400-08
Polished Stainless.
Gloss Black.
A. SWEPT WING RIDER FOOTBOARD
PANS – CHROME
(SHOWN WITH STREAMLINER INSERT)
B. BLACK RIDER FOOTBOARD PANS –
TRADITIONAL SHAPE
A. SWEPT WING RIDER FOOTBOARD
PANS – CHROME
B. BLACK RIDER FOOTBOARD PANS –
SWEPT WING SHAPE
C. HALF-MOON RIDER FOOTBOARDS –
POLISHED STAINLESS
C. HALF-MOON RIDER FOOTBOARDS –
POLISHED STAINLESS
Not all products are available in all countries – please consult your dealer for details.
C. HALF-MOON RIDER FOOTBOARDS –
GLOSS BLACK
C. HALF-MOON RIDER FOOTBOARDS –
GLOSS BLACK
D. FLHX PASSENGER FOOTBOARD PANS
E. SWEPT WING PASSENGER FOOTBOARD
PANS – GROOVED
E. SWEPT WING PASSENGER FOOTBOARD
PANS – SMOOTH
CONTROLS
583
Footboards
D. FLHX PASSENGER FOOTBOARD PANS
Combine passenger comfort with a sinister blacked-out style.
These unique Swept Wing Passenger Footboard Pans complement the Swept Wing Rider Footboard shape and allow you to replace the Original Equipment FLHX passenger footpegs with footboards. When folded, the footboards showcase the rich black anodized finish and machined aluminum tri-line FLHX highlights. Kit includes left and right footboard pans. Footboard pans accept Original Equipment or custom accessory Swept Wing footboard inserts (sold separately).
Footboard supports required.
50500041
Fits ’86-later Touring, ’00-later Softail ® and ’06-later Dyna ® models equipped with passenger footboard supports. Does not fit Trike models.
E. SWEPT WING PASSENGER FOOTBOARD PANS
These unique Swept Wing Passenger Footboard Pans complement the Swept Wing Rider Footboard shape and allow you to replace the Original Equipment passenger footpegs on certain models with footboards. When folded, the footboard displays a mirror-chrome surface in your choice of smooth or ball-milled grooved design. Footboard inserts and footboard supports sold separately.
Fits ’86-later Touring, ’00-later Softail and ’06-later Dyna models equipped with passenger footboard supports. Does not fit Trike models.
50357-04
50716-04
Chrome – Grooved.
Chrome – Smooth.
F. HALF-MOON PASSENGER FOOTBOARD
PANS AND INSERTS
Styled to match the Half-Moon Rider Footboards, these classic passenger footboards add both style and comfort to your nostalgic ride. Available in mirror-chrome or gloss black finish, the kit includes left and right footboard pan and vibrationisolation footboard inserts. Model-specific footboard mounts are sold separately.
Fits ’86-later Touring, ’00-later Softail and ’06-later Dyna models equipped with passenger footboard supports. Does not fit Trike models.
50807-08
50810-08
Chrome.
Gloss Black.
F. HALF-MOON PASSENGER FOOTBOARD PANS – CHROME
F. HALF-MOON PASSENGER FOOTBOARD PANS – GLOSS BLACK
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
584
CONTROLS
Footboards
A. CHROME PASSENGER FOOTBOARD PANS
Replace the factory black painted passenger footboard with the custom look of smooth chrome. The kit includes left- and right-hand traditional D-shaped footboard pans, chromeplated and ready to install with your Original Equipment hardware. Just add your choice of footboard insert for the finishing touch. Footboard supports sold separately.
50752-04
Fits ’86-later Touring and Trike, ’00-later Softail
®
and ’06later Dyna ® supports.
models equipped with passenger footboard
B. MINI FOOTBOARD KIT
This footboard kit can be installed in place of traditional footpegs and provides a little additional leg support and more options to move your legs around on a long ride. Mini
Footboards mount to the standard H-D ® style footpeg supports and can be used in many rider, passenger and highway peg applications. Sole-gripping rubber complements
Original Equipment or accessory footboards and footpegs and adds vibration isolation and a rich appearance.
Fits rider position:
VRSC™ models with forward controls (except VRSCDX and
VRSCF), ’06-earlier XL, ’07-’10 XL883, XL883R, XL883C,
XL1200C, XL1200R and ’07-’11 XL1200L, Dyna (except FLD) and Softail models with forward controls (except FXCW,
FXCWC, FXS, FXSB or FXSBSE).
Fits passenger position:
All models with H-D male-mount passenger peg mounts
(except ’06-earlier VRSC, ’03-earler XL, ’05-earlier Dyna and Softail models equipped with Shotgun exhaust). Softail models require separate purchase of Support Kit
P/N 50454-09.
Fits highway peg position:
All models with frame-mount or engine guard-mount highway pegs (except Whiskers Adjustable Highway Bar
P/N 50855-09 and 50865-09).
50500139
Small 3.0" – Chrome.
50500144
Small 3.0" – Gloss Black.
50500109
Large 4.0" – Chrome.
50500124
Large 4.0" – Gloss Black.
A. CHROME PASSENGER FOOTBOARD PANS
B. MINI FOOTBOARD KIT –
LARGE CHROME
B. MINI FOOTBOARD KIT –
LARGE GLOSS BLACK
Not all products are available in all countries – please consult your dealer for details.
4" Chrome
3" Chrome
4" Black
B. MINI FOOTBOARD KIT
3" Black
CONTROLS
585
Highway Pegs
C. BILLET ENGINE GUARD FOOTPEG MOUNTING
KIT – CHROME
C. BILLET ENGINE GUARD FOOTPEG MOUNTING KIT*
Here’s a stylish way to get your feet into the wind. This beautifully polished Billet Aluminum Footpeg Mount Kit installs easily on your engine guard and lets you stretch your legs on cross-country rides. Available in your choice of chrome or gloss black finishes. Works with all H-D ® footpegs.
style male-mount
Fits front engine guards with 1.25" diameter tubing (except
VRSC™ Engine Guard P/N 49267-01A, 49388-09, XL Engine
Guard P/N 49060-04
†
, 49287-11, 49215-07
†
or Softail
®
Nostalgic Engine Guard P/N 49037-05A). Requires separate purchase of Chrome Bullet Tip Footpeg Bolt Kit P/N 94133-01.
50957-02B
Chrome.
54234-10
Gloss Black.
C. BILLET ENGINE GUARD FOOTPEG MOUNTING
KIT – GLOSS BLACK
D. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
ANGLED*
Stretch out for added comfort. This Adjustable Highway
Peg Mounting Kit can be set for shorter riders and it can be reversed to reach far forward for those with long legs. The angled design allows the arm to reach back and around to clear fairing lowers. The arm can be raised and lowered for a custom fit. The mounting clamp firmly grips the engine guard and the locking design secures the peg at the desired angle. Available in mirror-chrome or gloss black finishes, the complete kit includes matching mounting hardware. Footpegs sold separately.
Fits 1.25" engine guards.
50829-07A
5.0" Long Angled – Chrome.
50830-07A
2.5" Short Angled – Chrome.
50500167
5.0" Long Angled – Gloss Black.
50500168
2.5" Short Angled – Gloss Black.
†
D. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
LONG ANGLED – CHROME
D. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
SHORT ANGLED – CHROME
*WARNING: Do not use engine guard footpegs under normal stop and go operating conditions. Doing so could result in death or serious injury.
*WARNING: Do not use highway pegs under normal stop and go operating conditions. Doing so could result in death or serious injury.
D. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
LONG ANGLED – GLOSS BLACK
D. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
SHORT ANGLED – GLOSS BLACK
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
586
CONTROLS
Highway Pegs
A. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
OFFSET*
Take rider comfort to the next level. These Offset Adjustable
Highway Peg Mounts allow the rider a wide range of adjustment to accommodate nearly every shape and size. The offset design allows installation on the side or top of the engine guard and the 360° rotation permits comfortable positioning for short or tall riders. The clamp securely grips the engine guard and the locking design keeps the peg at the desired angle. Kit includes chrome-plated clamp, adjustable arm and chrome mounting hardware. Footpegs are sold separately.
Fits 1.25" engine guards.
50827-07A
4.5" Long Offset
50828-07A
3.0" Short Offset.
B. ADJUSTABLE HIGHWAY PEG MOUNTING KIT – 360°*
Change your foot position for added comfort on long stretches of open road. The 360° Adjustable Highway Peg can be rotated and locked in a wide range of positions to accommodate both the tall and short rider. The chrome-plated clamp holds its place on the engine guard and the arm locks the peg securely in position. Kit includes chrome-plated mount, arm and installation hardware. Footpegs sold separately.
50832-07A
3.0" Short Offset.
Fits 1.25" engine guards.
A. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
LONG OFFSET
A. ADJUSTABLE HIGHWAY PEG MOUNTING KIT –
SHORT OFFSET
C. FOOTPEG THREE-PIECE CHROME CLAMPS*
For use on frame or engine guard. Universal mount except
VRSC™ models.
50903-85T
Fits 1.25" engine guards (except VRSC Engine Guard
P/N 49267-01A, 49388-09, XL Engine Guard P/N 49060-04 † or Softail
®
Nostalgic Engine Guard P/N 49037-05A).
D. ENGINE GUARD FOOTPEG MOUNTING KIT*
Allows easy installation of any H-D ® male mount-style footpegs on to H-D front engine guards. All pieces necessary are included in the kit, with no extra hardware to buy.
50964-98
Fits 1.25" engine guards (except VRSC Guard P/N 49267-01A,
49388-09, XL Engine Guard P/N 49060-04
Nostalgic Engine Guard P/N 49037-05A).
† or Softail
E. ENGINE GUARD FOOTPEG MOUNT CHROME
HARDWARE KIT*
Jump from zinc to chrome with this chrome-plated hardware kit, which replaces the standard hardware in Engine
Guard Footpeg Mounting Kit P/N 50964-98. Made to Original
Equipment standards for unmatched quality, the bolts bear the “Harley-Davidson” mark to signify they’re the genuine article.
94140-02
Fits Engine Guard Footpeg Mounting Kit P/N 50964-98.
†
B. ADJUSTABLE HIGHWAY PEG
MOUNTING KIT – 360°
C. FOOTPEG THREE-PIECE CHROME CLAMPS
*WARNING: Do not use engine guard footpegs under normal stop and go operating conditions. Doing so could result in death or serious injury.
*WARNING: Do not use highway pegs under normal stop and go operating conditions. Doing so could result in death or serious injury.
Not all products are available in all countries – please consult your dealer for details.
D. ENGINE GUARD FOOTPEG MOUNTING KIT E. ENGINE GUARD FOOTPEG MOUNT CHROME
HARDWARE KIT
F. ENGINE GUARD MOUNT FOOTPEGS –
HARLEY SCRIPTED
F. ENGINE GUARD MOUNT FOOTPEGS –
RUBBER INSERTS
G. BULLET TIP FOOTPEG BOLT KIT – CHROME
CONTROLS
587
Footpegs
F. ENGINE GUARD MOUNT FOOTPEGS*
Custom engine guard mounted footpegs let you stretch your legs in style. Easy to install chrome-plated pegs clamp firmly to the guard. Sold in pairs.
Fits highway peg position on 1.0" and 1.25" engine guards
(except VRSC™).
49102-86T
Harley Scripted.
49144-86
Rubber Inserts.
G. BULLET TIP FOOTPEG BOLT KIT – CHROME
Put the final touch on a custom footpeg installation with this chrome Bullet Tip Footpeg Bolt Kit. Sold in pairs, this accessory includes chrome button head bolts, washers and uniquely styled nuts. All hardware is developed to Original Equipment standards to ensure product quality.
94133-01
Fits male mount-style footpegs (except ’08-’13 XR models).
H. FOOTPEG MOUNTING HARDWARE KIT – CHROME
Polished and chrome-plated hex head bolts replace the
Original Equipment footpeg mounting hardware for a truly finished look. Kit includes two chrome-plated bolts and lock nuts with nylon inserts. The bolts carry a Harley-Davidson
Bar & Shield proof mark. All hardware is developed to Original
Equipment standards to ensure product quality.
94139-01
Fits male mount-style footpegs (except ’08-’13 XR models).
I. FOOTPEG MOUNTING PINS – POLISHED
Stainless steel for rust and corrosion resistance. Polished for good looks. Replaces Original Equipment footpeg mounting hardware.
42679-01
Fits male mount-style footpegs (except ’08-’13 XR and
FLSTSE/2/3 models).
J. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT
Maximize your passenger’s riding comfort. Proper foot position reduces the cramped or stretched-out feeling and relieves pressure on the knees and the tailbone. These Adjustable
Mounts raise and lower the passenger footpeg to accommodate taller and shorter passengers. Easy to adjust with common tools, the mount adjusts through a 360° range
(depending on model), allowing both fore and aft and up and down height adjustment. Kit includes left and right adjustable support assembly and all required mounting hardware.
Footpegs sold separately.
50763-09
Fits models with H-D ® male mount-style passenger footpeg supports (except Softail
®
). Does not fit with
Heel Raiser Footpeg Kit P/N 50178-09. Does not fit the rider position.
H. FOOTPEG MOUNTING HARDWARE KIT –
CHROME
I. FOOTPEG MOUNTING PINS – POLISHED
J. ADJUSTABLE PASSENGER FOOTPEG MOUNT KIT
*WARNING: Do not use engine guard footpegs under normal stop and go operating conditions. Doing so could result in death or serious injury.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
588
CONTROLS
Mirrors
A. FAIRING MOUNT MIRRORS – BLACK
Fairing Mount Mirrors offer a truly innovative look from the traditional handlebar-mounted mirrors. Mounting just inside the inner fairing, the molded plastic mirror housings complement the contours of the batwing fairing. They provide a wide range of adjustability and feature convex mirror glass that maximizes your field of view. The Bar & Shield logo is carefully laser-etched on each mirror glass. Kit includes necessary hardware, instructions and mounting template for easy installation.
56000076
Fits ’14-later Electra Glide
®
and Tri Glide
®
models. Original
Equipment on Street Glide ® models.
91945-98B †
Fits ’96-’13 Electra Glide and Trike models. Original equipment on Street Glide models.
B. FAIRING MOUNT MIRRORS – CHROME
Add a splash of chrome to the “batwing” inner fairing. These
Fairing Mount Mirrors de-clutter the handlebar and add a contemporary aero style to your ride. The attractive chrome housing provides a custom look and the convex mirror and wide range of adjustment maximizes your field of view. A direct bolt-on replacement for Original Equipment fairing mount mirrors, the kit includes the hardware and mounting template required for easy and accurate installation.
56000077
Fits ’14-later Electra Glide, Street Glide and Tri Glide models.
56000029
Fits ’96-’13 Electra Glide, Street Glide and Trike models.
Original Equipment on ’12 FLHXSE models.
C. SPLIT VISION FAIRING MOUNT MIRRORS
See even more of the world that you just passed. This exclusive-design Split Vision Mirror minimizes blind spots and provides a wide panoramic rear view of the left and right lane and the road behind you. The mirror features a large primary panel for normal view and a second outboard convex panel for a wider field of vision. Slightly larger than the standardview Fairing Mount Mirrors, these Split Vision Mirrors offer the same full range of adjustability. A direct bolt-on replacement for standard-view Fairing Mount Mirrors, the kit also includes the hardware and mounting template required for easy and accurate installation.
92085-10
Fits ’96-’13 Electra Glide, Street Glide and Trike models (pair).
Does not fit with Chrome Fairing Mount Mirror Covers
P/N 91924-09, Illuminated Chrome Mirror Covers
P/N 92600-10 or Fairing Mount Mirror Covers
P/N 92200001.
D. FAIRING MOUNT MIRROR COVERS – CHROME
Add a splash of chrome to the inner fairing. The chrome-plated housings wrap around the back and side of the fairing mount mirrors, presenting a clean, uncluttered profile. The perfect finishing touch to a fully dressed inner fairing.
91924-09
Fits ’06-’13 FLHX and FLHXSE models and other Electra
Glide models equipped with Fairing Mount Mirrors P/N
91945-98B † . Does not fit with Split Vision Fairing Mount
Mirrors P/N 92085-10.
†
A. FAIRING MOUNT MIRRORS – BLACK
B. FAIRING MOUNT MIRRORS – CHROME
C. SPLIT VISION FAIRING MOUNT MIRRORS
*Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear.
Not all products are available in all countries – please consult your dealer for details.
D. FAIRING MOUNT MIRROR COVERS – CHROME
E. ILLUMINATED FAIRING MOUNT MIRROR COVERS – CHROME
CONTROLS
589
Mirrors
E. ILLUMINATED FAIRING MOUNT MIRROR
COVERS – CHROME
Add auxiliary LED turn signals and a splash of chrome to the inner fairing. The perfect finishing touch to a fully dressed inner fairing, these chrome-plated mirror housings feature fast-acting amber LED turn signals at the outer edge. Side turn signals attract attention from the drivers around you and the plug-in, no-splice design simplifies installation.
56000084
Fits ’14-later Touring and Trike models with fairing-mount mirrors. Does not fit with Split Vision Fairing Mount Mirrors
P/N 92085-10.
92600-10
Fits ’06-’13 FLHX and FLHXSE models and other Electra
Glide
®
models equipped with Fairing Mount Mirrors P/N
91945-98B
†
. Does not fit with Split Vision Fairing Mount
Mirrors P/N 92085-10.
F. MIRRORS WITH AUXILIARY RUNNING LIGHT AND
DIRECTIONAL INDICATOR*
Function and style in one package. This forged mirror combines a traditional swept shape with a contemporary addition – forward-facing auxiliary lighting. Smoked lenses hide bands of amber LED lamps that glow as running lamps when the ignition is on and add a fast-acting auxiliary directional indicator when the turn signals are activated. The forward-facing eye-level lamps command additional attention from oncoming traffic. Both mirrors flash when the emergency hazard lights are activated. The wiring is concealed in the housing and stem and is easily connected to the Original
Equipment wiring harness. Available in mirror-chrome or satin black finish.
Fits ’14-later Touring (except Road King
®
) and Trike models.
56000080
Chrome.
56000081
Black.
Fits ’97-later models (except VRSCF, XG, XL1200X, FXCWC and ’14-later Touring). Also fits ’14-later Road King models.
92059-07A
Chrome.
92068-08A
Satin Black.
†
F. MIRRORS WITH AUXILIARY RUNNING LIGHT AND DIRECTIONAL INDICATOR – CHROME
F. MIRRORS WITH AUXILIARY RUNNING LIGHT AND DIRECTIONAL INDICATOR – SATIN BLACK
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
590
CONTROLS
Mirrors
A. PROFILE CUSTOM MIRRORS WITH SLOTTED STEM*
Billet-style mirror features a low-profile swept back design, slotted stem and a laser etched “Harley-Davidson” script on mirror back. The teardrop shape provides excellent rearward visibility and the slim lines add a true custom touch.
91697-06A
Fits ’82-later models (except VRSCF, ’14-later FLHTKSE and
XL1200X mounted below the handlebars).
B. TRIBAL COLLECTION MIRRORS*
Billet-style mirror features a tapered shape that provides excellent rearward visibility. The deeply grooved stem and the swept-back design hug the contour of the handlebar and the tribal flames add an element of ancient mystery. The distinctive cast-in recesses of the tribal layout highlight the details in the metal work and add depth and dimension to the gloss black or polished chrome finish. Design complements the available Tribal Collection hand grips, footpegs and foot controls.
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
92410-09
92398-09
Chrome.
Gloss Black.
C. BUCKSHOT MIRRORS*
The deep grooved and perforated stem of this custom mirror is the ideal complement to the Buckshot Collection of foot and hand controls. The tapered mirror and stem are polished and chrome-plated or black-coated for a deep luster.
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
92096-05
92416-08
Chrome.
Satin Black.
D. BULLET MIRRORS*
This sweeping teardrop-shaped mirror is manufactured from forged aluminum and beautifully chrome-plated for a custom appearance. The “bullet grooved” curved stem and the smooth mirror housing are highlighted with a laser-etched
“Harley-Davidson” script.
91657-02
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
E. EDGE CUT MIRRORS*
The slotted stem of this custom mirror is the ideal complement to the Edge Cut Collection of foot and hand controls.
The tapered stems are black-anodized for a rich finish and the slots are machined to expose the raw aluminum and form the final cut back look. The satin black mirror shell complements the Original Equipment hand control finish for a cohesive look.
92441-10
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
A. PROFILE CUSTOM MIRRORS WITH SLOTTED STEM
B. TRIBAL COLLECTION MIRRORS –
CHROME
B. TRIBAL COLLECTION MIRRORS –
GLOSS BLACK
C. BUCKSHOT MIRRORS – CHROME C. BUCKSHOT MIRRORS – SATIN BLACK
*Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear.
Not all products are available in all countries – please consult your dealer for details.
D. BULLET MIRRORS E. EDGE CUT MIRRORS
F. DOME BILLET STYLE MIRRORS
G. SPLIT VISION MIRRORS
CONTROLS
591
Mirrors
F. DOME BILLET STYLE MIRRORS – SATIN BLACK*
This special mirror features a smooth, dome-shaped billet head, unique single slot stem and a satin black mirror. It’s a clean look that provides distinctive style.
92423-08A
Fits ’65-later models (except VRSCF and XL1200X mounted below the handlebars).
G. SPLIT VISION MIRRORS*
See even more of the world you just passed. This exclusivedesign Split Vision Mirror minimizes blind spots and provides a wide panoramic rear view of the left and right lane and the road behind you. The mirror features a large primary panel for normal view and a second outboard convex panel for a wider field of vision. Chrome-plated to a brilliant shine, the mirror’s shape adds a contemporary touch to the traditional teardrop design. The deep embossed “Harley-Davidson” script and the curving slotted stem set this mirror apart from the others.
92190-06
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
H. SLIPSTREAM MIRRORS*
The tapered shape and the rich finish of these Slipstream
Mirrors set the stage for a show-winning look. The teardropshaped mirrors feature stylish aero-inspired spears deeply embedded in the surface and square-shouldered pads for a contemporary look. The rich chrome surfaces and contrasting raised black panels complement the complete Slipstream
Collection and look right on both blacked-out and chrome- covered bikes.
56000006
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
I. TAILFIN CUSTOM MIRRORS*
This billet-style swept Tailfin Mirror offers a unique view of the road behind you. The finned mirror back and the custom raised-rib mirror stem combine to bring the art deco “streamliner” look into the 21st century. The die-cast mirror body and forged stem are polished and chrome-plated for a brilliant finish.
91696-05A
Fits ’82-later models (except VRSCF, ’14-later FLHTKSE,
FLHRSE6, FLHR and FLHRC models and XL1200X mounted below the handlebars).
J. WILLIE G SKULL TEARDROP MIRRORS*
Add a little attitude to your ride. Styled to complement
Harley-Davidson
®
Skull accessory items, the menacing raised skull with black-filled eyes leaps from a field of chrome. The surrounding “Harley-Davidson Motorcycles” script is the perfect finishing touch. The teardrop shape improves rearward visibility.
91315-04
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
H. SLIPSTREAM MIRRORS
I. TAILFIN CUSTOM MIRRORS J. WILLIE G SKULL TEARDROP MIRRORS
*Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
DYNA
Not all products are available in all countries – please consult your dealer for details.
592
CONTROLS
Mirrors
A. TEARDROP MIRRORS*
High-profile custom mirrors at a great price. These beautifully chrome-plated mirrors are available in two styles, Classic and Script. They feature laser-etched convex glass and black, color-filled graphics.
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
91971-98
91968-98
Classic.
“Harley-Davidson” Script.
B. OVAL ALUMINATOR ® BILLET STYLE MIRRORS*
Some people would call this a collection that is precisionmade by computer-controlled machinery which produces rare shapes, beveled edges, subtle counterbores and distinctive ovals. We call it the Aluminator
®
Collection. Signature
Aluminator styling gets added function with a specially machined stem and convex lens that allow adjustments for the optimum field of view. Both the extruded aluminum stem and forged aluminum head are machined, polished and chrome-plated.
91965-98
Fits ’82-later models (except VRSCF and XL1200X mounted below the handlebars).
A. TEARDROP MIRRORS – CLASSIC
C. ONE-PIECE ROUND MIRRORS*
Fits all models (except VRSCF and XL1200X mounted below the handlebars).
91931-92T
Short Stem, Left Side.
91930-92T
Short Stem, Right Side.
D. “LIVE TO RIDE” LOGO COLLECTION MIRRORS*
Fits ’65-later models (except VRSCF and XL1200X mounted below the handlebars).
1. One-Piece Short Stem Mirrors
91866-90T
Gold, Left.
91864-90T
Gold, Right.
2. One-Piece Long Stem Mirrors
91871-93T
Gold, Left.
91861-93T
Gold, Right.
E. FLAMES COLLECTION MIRRORS*
Fits ’65-later models (except VRSCF and XL1200X mounted below the handlebars).
91940-98
91939-98
Short Stem, Left.
Short Stem, Right.
F. LONG STEM ONE-PIECE MIRRORS – BLACK*
Fits ’65-later models (except VRSCF and XL1200X).
91910-90A
Long Stem, Left.
91909-90A
Long Stem, Right.
G. TWO-PIECE MIRRORS – CHROME*
Fits ’65-later models (except VRSCF and XL1200X).
91875-70B
Short Stem, Right or Left.
91879-67B
Long Stem, Right or Left.
B. OVAL ALUMINATOR BILLET STYLE MIRRORS
1
2
D. “LIVE TO RIDE” LOGO COLLECTION
MIRRORS – GOLD
A. TEARDROP MIRRORS –
“HARLEY-DAVIDSON” SCRIPT
C. ONE-PIECE ROUND MIRRORS
E. FLAMES COLLECTION MIRRORS
*Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear.
Not all products are available in all countries – please consult your dealer for details.
F. LONG-STEM ONE-PIECE MIRRORS – BLACK G. TWO-PIECE MIRRORS – CHROME
H. TAPERED MIRRORS – BLACK H. TAPERED MIRRORS – CHROME
I. MIRROR EXTENSION KIT – CHROME
CONTROLS
593
Mirrors
H. TAPERED MIRRORS*
Update your Harley ® motorcycle with the latest style in mirrors. This 2003-later Original Equipment style tapered mirror provides improves rearward visibility, offers a wider range of adjustment and eliminates the rear fasteners for a cleaner look. Available in your choice of satin black or chrome finish.
Fits ’65-later models (except VRSCF and XL1200X mounted below the handlebars).
92023-03A
Black – Short Stem Kit.
91982-03B
Black – Short Stem, Right.
91983-03B
Black – Short Stem, Left.
91909-03B
Black – Long Stem, Right.
91910-03B
Black – Long Stem, Left.
92022-03A
Chrome – Short Stem Kit.
91840-03B
Chrome – Short Stem, Right.
91845-03B
Chrome – Short Stem, Left.
91846-03B
Chrome – Long Stem, Right.
91848-03B
Chrome – Long Stem, Left.
I. MIRROR EXTENSION KIT
See what’s behind you. The Mirror Extension Kit improves visibility to the rear of your bike by repositioning mirrors outward approximately 2.0" and upward 1.0", clearing your field of view and allowing you to see past your shoulders. Available in your choice of chrome or satin black finish to match your mirrors and hand controls. Easy to install extenders fit a wide selection of Harley-Davidson
®
Original Equipment and accessory mirrors.
Fits ’06-later Dyna
®
and ’08-later Softail
®
models.
56000039
Chrome.
56000042
Satin Black.
J. MIRROR EXTENSION KIT*
Chrome-plated extenders relocate mirrors approximately two inches higher.
91907-87
Fits all models (except VRSCF and XL1200X mounted below the handlebars).
I. MIRROR EXTENSION KIT – SATIN BLACK
J. MIRROR EXTENSION KIT
*Harley-Davidson Motor Company cannot test and make specific fitment recommendations concerning every possible mirror and handlebar combination. Therefore, after installing new mirrors or handlebars and before operating the motorcycle, check to ensure that the mirrors provide the operator a clear view to the rear.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
DYNA
Not all products are available in all countries – please consult your dealer for details.
594
CONTROLS
Hand Controls
CHROME HAND CONTROL COMPONENTS
The flash of chrome. It’s the first thing that everyone sees. And the one thing that everyone remembers. Dressing your bike’s hand controls in chrome is one of the first steps in building a complete custom ride. After all, the hand controls are the one visual and physical connection you have with your bike every minute you are in the saddle. Harley-Davidson offers all the components you need to make the custom conversion.
A complete Chrome Hand Control makeover would include:
• Chrome Clutch Bracket and Master Cylinder Reservoir Kit
• Chrome Switch Housing Kit
• Chrome Switch Cap Kit
• Chrome Hand Control Levers
• Custom Hand Grips
• Custom Brake Lines and Control Cables
A. CHROME CLUTCH BRACKET AND MASTER CYLINDER
RESERVOIR KIT
Replace your stock painted aluminum controls with brilliant chrome, without compromising quality. This kit is manufactured from the Original Equipment components and includes
Chrome Master Cylinder Cover. When combined with Chrome
Switch Housing Kit, Chrome Switch Caps and other Harley-
Davidson
®
Genuine Motor Accessories, this front brake control kit provides a look that does more than stop your bike – it can stop traffic.
41700190
Fits ’14-later XL models with single disc front brake with ABS.
41700262
Fits ’14-later XL models with single disc front without ABS.
42307-07
Fits ’07-’13 XL models with single disc front brakes.
42307-04
Fits ’04-’06 XL models with single disc front brakes.
45284-99D
Fits ’96-’03 XL, ’96-’05 Dyna ® and Softail ® models with single disc front brakes and cable operated clutch.
45281-99D
Fits ’96-’03 XL, ’96-’05 Dyna and Softail and ’96-’04 Touring models with dual disc front brakes and cable operated clutch.
45355-08
Fits ’08-later Dyna (except ’14-later FXDL) and ’08-’14 Softail models equipped with single disc front brakes and cable operated clutch.
45355-06A
Fits ’06-’07 Dyna and Softail models equipped with single disc front brakes and cable operated clutch.
42117-08
Fits ’08-later Touring models with cable operated clutch.
46418-05A
Fits ’05-’07 Touring models with cable operated clutch.
46112-02D
Fits ’02-’05 VRSC™ models. Also fits hydraulic clutchequipped ’96-’05 Dyna and Softail and ’96-’04 Touring models with dual disc front brakes.
42100-06A
Fits ’06-later VRSC models.
41700263A
Fit ’14-later Touring (except Road Glide ®` ) models with hydraulic clutch. Does not fit Trike models.
36700100
Fits ’15-later Softail models with cable operated clutch.
41700324
Fits ’15-later Road Glide models.
CHROME HAND CONTROL COMPONENTS
A. CHROME CLUTCH BRACKET AND MASTER
CYLINDER KIT – (41700190 SHOWN)
A. CHROME CLUTCH BRACKET AND
MASTER CYLINDER KIT – (45355-08 SHOWN)
A. CHROME CLUTCH BRACKET AND MASTER
CYLINDER KIT – (42307-07 SHOWN)
A. CHROME CLUTCH BRACKET AND MASTER
CYLINDER KIT – (42117-08 SHOWN)
Not all products are available in all countries – please consult your dealer for details.
A. CHROME CLUTCH AND BRAKE MASTER
CYLINDER KIT – (46112-02D SHOWN)
A. CHROME CLUTCH AND BRAKE MASTER
CYLINDER KIT – (41700263 SHOWN)
B. SWITCH HOUSING KIT – CHROME
(71500185 SHOWN)
B. SWITCH HOUSING KIT – CHROME
(70222-96B SHOWN)
B. SWITCH HOUSING KIT – CHROME
(70223-96B SHOWN)
C. HANDLEBAR RESERVOIR COVER SET
CONTROLS
595
Hand Controls
B. SWITCH HOUSING KIT – CHROME
Convert your handlebar switch housings from black to brilliant chrome. Complete kit includes left and right housings sets. No switches or wiring required.
70222-96B
Fits ’96-later VRSC™, ’96-’13 XL, ’08-’12 XR and ’96-’13 FLHR models. Also fits ’96-’11 Dyna ® and ’96-’10 Softail ® models.
Does not fit FXSTDSE and FLHRSE models.
71826-11
Fits ’14-later XL and ’12-later Dyna and Softail models (except
FLSTSE/2 and FXSBSE).
70223-96B
Fits ’96-’13 FLHT, FLHTC and ’06-’13 FLHX and FLTRX models without cruise control.
70228-96C
Fits ’96-’13 FLHTCU, FLHTCUTG, FLHTK, FLTR, FLTRU and
’02-’13 FLHRC models. Also fits ’02-’13 FLHR models equipped with cruise control.
71813-09
Fits ’96-’13 FLHT, FLHTC, FLHX and FLTRX models equipped with cruise control.
71500185
Fits ’14-later Touring and Trike models.
C. HANDLEBAR RESERVOIR COVER SET
This kit includes a chrome-plated clutch bracket, handlebar control clamps, master cylinder cover and hardware to completely finish chroming the hand controls. Combine with chrome-plated Switch Housing Kit P/N 70222-96B to finish the look. Cannot be used with Auxiliary Lighting Kits.
46099-98
†
Fits ’96-’03 XL, ’96-later Dyna, ’96-’14 Softail and ’96-’07
Touring models with dual disc front brakes. (Does not fit
VRSC models or models equipped with hydraulic clutch.)
46098-98
†
Fits ’96-’03 XL, ’96-later Dyna and ’96-’14 Softail models with single disc front brakes. (Does not fit models equipped with hydraulic clutch.)
D. TURN SIGNAL EXTENSION CAPS
Make signaling simple. These Turn Signal Extension Caps allow riders to easily reach and activate turn signals without repositioning or removing their hands from the grips. The one-piece design features a contoured thumb extension that places the left and right hand signal control in a comfortable position. Available in chrome and black, these Extension Caps replace the stock turn signal switch caps without re-wiring.
Fits ’14-later XL, ’12-later Dyna and ’11-later Softail models
(except FLSTSE and FXSBSE).
71500177
71500178
Black.
Chrome.
Fits ’96-later VRSC, ’96-’13 XL, ’08-’12 XR, ’96-’13 Touring,
’96-’11 Dyna and ’96-’10 Softail models.
71500179
71500180
Black.
Chrome.
Fits ’14-later Road King
®
and Freewheeler™ models.
71500285
Black.
Fits ’14-later Electra Glide ® models.
, Street Glide ® and Tri-Glide ®
71500286
Black.
†
D. TURN SIGNAL EXTENSION CAPS – BLACK D. TURN SIGNAL EXTENSION CAPS – CHROME
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
596
CONTROLS
Hand Controls
A. LIGHTED HAND CONTROL SWITCHES
Add function and style to the Original Equipment hand controls. Lighted Hand Controls feature soft white LED backlighting that illuminates the switch function icons for enhanced nighttime visibility. You get at-a-glance identification and a modern up-to-date look. Kit includes plug-in switch packs for left- and right-hand controls.
71500248
Fits ’14-later Touring (except Road King
®
) and Trike models with hydraulic clutch. Stock on ’14-later CVO™ Touring models.
71500250
Fits ’14-later FLHR and FLHRC models with cable-actuated clutch.
B. SWITCH CAP KIT – CHROME
Not satisfied until everything you see is chrome? These
Chrome Switch Cap Kits will add style to one of the most visible areas of your bike, the switches. Shaped for the same ergonomic feel as the Original Equipment hand control switches, these caps replace the stock black caps without re-wiring. The chrome switch caps complement other chrome hand control accessories (Chrome Master Cylinder Kit, Chrome Hand
Levers, Chrome Switch Housings and Chrome Master Cylinder
Cover) to complete the custom look.
71804-03
Fits ’96-later VRSC™, ’96-’13 XL, XR and FLHR models. Also fits ’96-’11 Dyna
®
, ’96-’10 Softail
®
and ’98-’01 FLHRC models.
FLHR models equipped with cruise control use Kit P/N
71808-03.
71500110
Fits ’14-later XL and ’12-later Dyna and Softail (except
FLSTSE3 and FXSBSE) models.
71872-11
Fits ’11 Softail models (except FLSTSE2).
71803-03
Fits ’96-’13 FLHT, FLHTC, FLHX and FLTRX models without cruise control.
71802-03
Fits ’96-’13 FLHTCU, FLHTCUTG, FLHTK, FLTR and
FLTRU models.
71808-03
Fits ’02-’13 FLHRC and FLHR models equipped with cruise control.
71816-09
Fits ’96-’13 FLHT, FLHTC, FLHX and FLTRX models with cruise control.
71656-07
Fits models equipped with Auxiliary On/Off Switch Kit
P/N 71718-02.
A. LIGHTED HAND CONTROL SWITCHES
A. LIGHTED HAND CONTROL SWITCHES –
(71500248 SHOWN)
A. LIGHTED HAND CONTROL SWITCHES –
(71500250 SHOWN)
B. SWITCH CAP KIT – CHROME
(SHOWN WITH CHROME SWITCH HOUSING)
B. SWITCH CAP KIT – CHROME
(71500110 SHOWN)
Not all products are available in all countries – please consult your dealer for details.
B. SWITCH CAP KIT – CHROME
(71816-09 SHOWN)
B. SWITCH CAP KIT – CHROME
(71656-07 SHOWN)
C. AUXILIARY ACCESSORY SWITCH
HOUSING KIT – CHROME (SHOWN WITH
AUXILIARY ON/OFF SWITCH)
D. AUXILIARY ON/OFF SWITCH KIT
E. CHROME MASTER
CYLINDER COVER
45078-96D
C. AUXILIARY ACCESSORY SWITCH
HOUSING KIT – BLACK (SHOWN WITH
AUXILIARY ON/OFF SWITCH)
E. CHROME MASTER CYLINDER COVER
’08-LATER TOURING MODELS
E. CHROME MASTER
CYLINDER COVER
46424-05B
E. CHROME MASTER
CYLINDER COVER
42313-07
CONTROLS
597
Hand Controls
C. AUXILIARY ACCESSORY SWITCH HOUSING KIT
Keep your eyes on the road and your hands on the grips with these easy-to-reach Auxiliary Accessory Switch Housings.
Available for left and right hand control clusters, these housings will allow you to install up to six switches (when two housings are used) to control various electrical devices. Available in black to match Original Equipment switch housings or a bright chrome finish to complement accessory Chrome Switch
Housing Kits. All necessary mounting hardware is included.
Switches sold separately.
Fits ’96-later VRSC™, XL, XR, Dyna
®
, Softail
®
and Touring models (except ’15-later Road Glide ® models). Does not fit models equipped with Large Diameter Handlebars,
Handlebar-Mounted GPS, Boom!™ Audio Cruiser Amp &
Speaker Kits or Tour-Pak
01. ’04-later XL and XR models require separate purchase of
(2) Screw P/N 3832M.
® Mounted CD Changer P/N 77184-
70213-02C
Chrome Left Side.
70248-02B
Black Left Side.
Fits ’96-later VRSC, XL, XR, Dyna, Softail and Touring models
(except ’15-later Road Glide models). Does not fit models equipped with Large Diameter Handlebars, Handlebar-
Mounted GPS, Boom! Audio Cruiser Amp & Speaker Kits or
Tour-Pak Mounted CD Changer P/N 77184-01. ’04-later XL and XR models require separate purchase of (2) Screw P/N
3832M.
70255-02B
Chrome Right Side.
D. AUXILIARY ON/OFF SWITCH KIT
Styled to match the Original Equipment hand controls. These
Auxiliary On/Off switches allow you to control additional electrical accessories with the touch of a finger when installed in the Auxiliary Accessory Switch Housing. Switches sold individually.
71718-02
Fits Auxiliary Accessory Switch Housing Kits P/N 70255-02B,
70256-02, 70213-02C and 70248-02B.
E. FRONT MASTER CYLINDER COVER — CHROME
Includes chrome-plated cover, gasket and decal. Easily installed with included stainless steel screws.
45078-96D
Brake.
Fits ’96-’03 XL, ’02-’05 VRSC, ’96-’05 Dyna and Softail and
’96-’04 Touring models.
46424-05B
Brake.
Fits ’06-later Dyna, ’06-’14 Softail and ’05-’07 Touring models. Also fits ’14-later Trike brake and clutch master cylinders.
42313-07
Brake.
Fits ’07-laterXL and XR models.
42313-04
Brake.
Fits ’04-’06 XL models.
42123-08
Brake.
Fits ’08-later Touring and ’09-’13 Trike models.
36700094
Clutch.
Fits ’14-later Touring models equipped with hydraulic clutch.
Does not fit Trike models.
42114-06A
Brake & Clutch (pair).
Fits ’06-later VRSC models.
41700297
Brake.
Fits ’15-later Softail models.
E. CHROME MASTER
CYLINDER COVER
42123-08
E. CHROME MASTER
CYLINDER COVER
36700094
E. CHROME MASTER
CYLINDER COVER
42114-06A
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
598
CONTROLS
Hand Controls
A. CHROME HAND CONTROL LEVER KIT
Continue the chrome theme with these Hand Control Levers.
Cast from aluminum, these levers feature a custom finish designed to match the accessory chrome hand controls or complement Original Equipment-style black components.
Clutch anti-rattle clip and new pivot bushing included.
36700053A
Fits ’14-later XL models.
36700065
Fits ’14-later Touring models equipped with hydraulic clutch.
Does not fit Trike models.
36700091
Fits ’14-later Trike models equipped with hydraulic clutch.
38843-08
Fits ’08-’13 Touring and Trike models. Also fits ’14-later FLHR and FLHRC. Does not fit models equipped with hydraulic clutch.
45075-07
Fits ’96-’03 XL, ’96-later Dyna
®
, ’96-’14 Softail
®
and ’96-’07
Touring models. Does not fit Police models or models equipped with hydraulic clutch.
44992-07
Fits ’04-’13 XL and XR models.
46114-07
Fits ’02-’05 VRSC™ and ’96-’06 Dyna, Softail and Touring models equipped with hydraulic clutch.
42270-06B
Fits ’06-later VRSC models.
36700104
Fits ’15-later Softail models.
B. BLACK HAND CONTROL LEVER KIT
Grab some black with these levers – a natural fit for black accessory handlebars or to further the blacked-out look of your motorcycle. A clutch anti-rattle clip and new pivot bushings are included.
36700052
Fits ’14-later XL models.
36700064
Fits ’14-later Touring models equipped with hydraulic clutch.
Does not fit Trike models.
38845-08
Fits ’08-’13 Touring and Trike models. Also fits ’14-later FLHR and FLHRC. Does not fit models equipped with hydraulic clutch.
44994-07
Fits ’96-’03 XL, ’96-later Dyna, ’96-’14 Softail and ’96-’07
Touring models. Does not fit Police models or models equipped with hydraulic clutch.
46944-07A
Fits ’04-’13 XL and XR models.
42275-07A
Fits ’06-later VRSC models.
36700105
Fits ’15-later Softail models.
C. EDGE CUT HAND CONTROL LEVER KIT
Styled to complement the Edge Cut components, these slotted hand levers feature a cut back finish that looks great against black or chrome hand controls. The crisp black anodized finish is machined to expose the raw aluminum highlights.
36700067
Fits ’14-later Touring models equipped with hydraulic clutch.
Does not fit Trike models.
55798-10A
Fits ’96-’03 XL, ’96-later Dyna, ’96-’14 Softail and ’97-’07
Touring models. Does not fit Police models or models equipped with hydraulic clutch.
36700004
Fits ’08-’13 Touring and Trike models. Also fits ’14-later FLHR and FLHRC. Does not fit models equipped with hydraulic clutch.
NEW
NEW
A. CHROME HAND CONTROL LEVERS
B. BLACK HAND CONTROL LEVERS
C. EDGE CUT HAND CONTROL LEVERS
Not all products are available in all countries – please consult your dealer for details.
D. SLOTTED HAND CONTROL LEVER KIT
E. CLUTCH FERRULE AND BANJO
BOLT COVER KITS
E. BRAKE & CABLE CLUTCH
E. BRAKE & HYDRAULIC CLUTCH
F. CLUTCH FERRULE AND BANJO BOLT COVER KIT – CHROME
CONTROLS
599
Hand Controls
D. SLOTTED HAND CONTROL LEVER KIT
Add that stripped-down custom look to your handlebar with these Slotted Chrome Hand Control Levers. Finished to a mirror-like shine, these billet-look levers place a touch of brilliance in the palm of your hand.
36700066
Fits ’14-later Touring models equipped with hydraulic clutch.
Does not fit Trike models.
38853-08
†
Fits ’08-’13 Touring and Trike models. Also fits ’14-later FLHR and FLHRC. Does not fit models equipped with hydraulic clutch.
E. CLUTCH FERRULE AND BANJO BOLT COVER KITS
These chrome-plated die-cast covers provide a custom look to your hand controls. The pair of tapered covers conceals the brake banjo bolt cable and the clutch cable or hydraulic line connections as they enter the hand controls. The two-piece design is easy to install and adds a finishing touch to Original
Equipment or braided lines and cables. Kits are available for models with cable- or hydraulic-operated clutch.
41300061
Brake and Cable Clutch.
Fits ’84-later models (except VRSC™, ’15-later XG, ’08-later
XR and ’15-later Softail
®
). Will not fit models equipped with hydraulic clutch. Some models may require rotation of the front master cylinder banjo fitting. See the service manual for
Brake systems procedures.
41300062
Brake and Hydraulic Clutch.
Fits ’09-later VRSC and ’08-later CVO™ models and bikes equipped with hydraulic clutch. Does not fit ’15-later Softail models. Some models may require rotation of the front master cylinder banjo fitting. See the service manual for
Brake systems procedures.
F. CLUTCH FERRULE AND BANJO BOLT
COVER KIT – CHROME
Die-cast chrome covers provide a custom look to your stock banjo bolts and handlebar clutch ferrule. Fits clutch ferrule on handlebar and banjo bolts on brake master cylinders and calipers. Installs in seconds.
32714-98A
Fits ’84-later models with stock master cylinder and calipers
(except ’02-later VRSC, ’15-later XG, ’04-later XL, ’15-later
Softail and ’08-later Touring and Trike). Will not fit models equipped with hydraulic clutch.
G. BANJO BOLT KIT – CHROME
Replace the Original Equipment 12-point zinc finish brake line hardware with brilliant chrome custom tapered banjo bolts.
41842-06
Fits ’91-’03 XL, ’91-later Dyna (except FXDF), ’95-’14 Softail and ’99-’00 FXR models equipped with single disc front brake. Does not fit on the Dyna or Softail ABS Hydraulic
Control Unit or with Banjo Bolt Cover Kit P/N 32715-98. Kit includes one 7/16" banjo bolt, three 3/8" banjo bolts and eight sealing washers.
41844-06
Fits ’02-’05 VRSCA and VRSCB and ’93-’07 Touring models.
Does not fit with Banjo Bolt Cover P/N 32715-98. Kit includes three 3/8" banjo bolts and six sealing washers.
H. BANJO BOLT KIT – CHROME
Replace the Original Equipment zinc finish brake line hardware with brilliant chrome custom banjo bolts.
41843-08
Fits ’06-later VRSC, ’08-later Touring and
’09-’13 Trike models.
†
G. BANJO BOLT KIT – CHROME H. BANJO BOLT KIT – CHROME
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
600
CONTROLS
Hand Controls
A. REAR MASTER CYLINDER COVER – CHROME
An easy way to add chrome to your bike is with this chromeplated version of the stock master cylinder cover.
46463-08
Fits ’08-later Touring models. Does not fit Trike models.
46425-05A
Fits ’06-later Dyna
®
without ABS, 06-later Softail
®
and ’05-
’07 Touring models.
45149-99C
Fit ’00-’05 Softail and ’99-’04 Touring models.
B. SWITCH HOUSING HARDWARE KIT
Complete the chrome conversion with this Chrome Hardware
Kit. Chrome-plated stainless steel hardware replaces the
Original Equipment black hardware on the hand control switch housing, clutch and brake bracket clamps.
91124-03A
Fits ’96-later models (except 15-later XG, ’04-later XL and XR and ’15-later Softail, Touring and Trike).
C. REDUCED EFFORT CLUTCH KIT
Kit includes a new clutch spring and inner/outer ramps that significantly reduce clutch lever effort. Original Equipment on
’06-later Twin Cam-equipped models.
36808-05
Fits ’99-’05 Twin Cam-equipped models. Stock on ’06-later
Twin Cam-equipped models. This kit is not for use with
Screamin’ Eagle
®
Performance Parts.
D. CRUISE CONTROL KIT
For long-distance runs, there’s nothing better than letting your bike do all the work. This Cruise Control Kit puts you closer to true touring bliss. The kit includes updated switch housing with controls that allow you to adjust your speed up or down with a flick of your thumb. The controls can be installed without splicing into the wiring harness or taking off the tank. Dealer must enable the cruise control function in the Electronic Control Module (ECM). Dealer installation is required.
77196-08
Fits ’08-’13 FLHX, FLHT, FLHTC and FLTRX models.
77197-08
Fits ’08-’13 FLHR models.
E. HANDLEBAR SWITCH CONTROL KIT
Updated for use with ’07-later models equipped with clutch interlock system. This exclusive Harley-Davidson
®
kit simplifies the switch to custom style handlebars. Kit features the
Original Equipment left and right switch housings, 60.0" wiring harness and all necessary hardware.
70239-07
Fits ’96-’13 XL, XR, ’96-’11 Dyna and ’96-’10 Softail models
(except ’07-’10 FLSTF). Also fits ’96-’13 Touring models without cruise control or radio controls.
A. REAR MASTER CYLINDER COVER – CHROME (’08-LATER MODELS SHOWN)
A. REAR MASTER CYLINDER COVER – CHROME (’99-’07 MODELS SHOWN)
B. SWITCH HOUSING HARDWARE KIT C. REDUCED EFFORT CLUTCH KIT
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
D. CRUISE CONTROL KIT – ’08-LATER MODELS E. HANDLEBAR SWITCH CONTROL KIT
CUSTOM BRAIDED CONTROL CABLES
Dress your bike for maximum impact. Harley-Davidson offers a selection of braided cable and brake line finishes to complement your customizing style. All cables and brake lines feature a clear anti-yellowing outer jacket that provides superior scuff protection and easy maintenance. Available in stock and plus lengths for custom applications.
Not all products are available in all countries – please consult your dealer for details.
CONTROL CABLES & BRAKE LINES
CONTROLS
601
Control Cables & Lines
DIAMONDBACK
™
BRAIDED CONTROL CABLES & BRAKE LINES
Diamondback™ braided cables and lines feature a brilliant metallic finish that blends perfectly with chrome handlebars and controls or provides a stark contrast to
“blacked-out” options. Fittings are finished in mirror chrome.
DIAMOND-BLACK BRAIDED CONTROL CABLES & BRAKE LINES
Diamond-Black braided cables and lines utilize a black braided wire to provide a deeper, truer, black braided finish you can see from a distance. Fittings are matched in black chrome to provide a sinister look for your ride.
SELECTING CABLES & BRAKE LINES
Thread Lock
CLUTCH CABLE
FEATURES
Co-Polymer Low
Friction Liner
Anti-Friction Insert Anti-Scratch
Lower Coating
Chrome or Black
Chrome Fittings
Swivel Action
THROTTLE / IDLE CABLE
FEATURES
Heavy Wall
Nylon Insert
Chrome or
Black Chrome Fittings
Micro-Fine Wire Braid in Silver or Black Finish
Waterproof Sliding
Adjuster Cover
Waterproof Seal
JIC Modular
Connector
Micro-Fine Braid in
Silver or Black Finish
Micro-Fine Wire Braid in Silver or Black Finish
Internal Lube Seal
Low-Effort Cable
Kevlar ®
Reinforced Liner
Low Friction
Liner
Nylon Coated
Inner Cable
BRAKE LINE
FEATURES
Crystal-Clear
Jacket
Teflon ® Inner
Tubing
602
CONTROLS
Control Cable Accessories
A. BILLET CLUTCH CABLE ADJUSTER DUST COVER
Replace the black rubber clutch cable boot with brilliant chrome. Machined from billet aluminum, this two-piece
“ball-milled” Dust Cover offers a striking contrast to Original
Equipment black cables and a natural finishing touch when installing a braided clutch cable. Easy to install with included hardware.
64108-03
Chrome.
Fits ’00-later XL, Dyna
®
and Softail
®
models (except FXS,
FXSBSE, FLSTNSE and FLSTSE/2/3). ’00-’03 XL models require installation of Clutch Cable Clamp P/N 91147-02 and
’04-later XL models require installation of Clutch Cable
Clamp P/N 91249-04 (sold separately).
B. CLUTCH CABLE CLIP
It’s all in the details. This stylish clamp replaces the plastic clutch cable clip on the frame tube and locks the cable in place for a custom look. This kit includes the cable clip and chrome hardware for easy installation.
Fits ’94-later Road King
®
models (except FLHRS).
38792-05A
Chrome.
Fits ’00-later Softail models (except FXCW, FXCWC, FXS, FXSB and FXSTSSE3).
91360-03
Chrome.
10800037
Edge Cut.
C. BILLET CLUTCH CABLE CLAMP – EDGE CUT
The perfect addition to braided or stock black clutch cables.
The clamp is designed to grip the cable and the frame down tube, adding a custom look to the front of your cycle. This
Clutch Cable Clamp is machined from aluminum billet and polished and finished for a lasting shine.
Fits ’11-’14 Softail models with 1.25" diameter front frame downtube (except Softail models with hydraulic clutch).
91147-02
Chrome.
10800034
Edge Cut.
Fits XL and Touring models with 1.375" diameter front frame downtube (except Touring models with hydraulic clutch or
’14-later XL models with ABS).
91249-04
Chrome.
10800035
Edge Cut.
Fits ’06-later Dyna models with 1.5" diameter front frame down tube.
38804-07
Chrome.
10800036
Edge Cut.
A. BILLET CLUTCH CABLE ADJUSTER
DUST COVER
B. CLUTCH CABLE CLIP – CHROME
(ROAD KING SHOWN)
B. CLUTCH CABLE CLIP – CHROME
(SOFTAIL SHOWN)
C. BILLET CLUTCH CABLE CLAMP – EDGE CUT
(SOFTAIL SHOWN)
Not all products are available in all countries – please consult your dealer for details.
C. BILLET CLUTCH CABLE CLAMP – CHROME C. BILLET CLUTCH CABLE CLAMP – EDGE CUT
D. BILLET BRAKE LINE CLIP – CHROME D. BILLET BRAKE LINE CLIP – EDGE CUT
CONTROLS
603
Control Cable Accessories
D. BILLET BRAKE LINE CLIP
It’s the details that count. Replace the Original Equipment black brake line clamp with this beautifully finished billet aluminum clip. These “ball-milled” clips mount in the factory position for easy installation. Kit includes chrome-plated mounting hardware.
Fits ’00-later XL and Dyna
®
(except FXDWG) models equipped with braided brake lines. Also fits ’08-later Dyna models
(except FXDWG) with Original Equipment brake lines.
91369-03
Chrome.
10800038
Edge Cut.
Fits ’00-later FXST, FXSTB, FXSTC, FXSTD and FXDWG models equipped with braided brake lines. Also fits ’08-later FXST,
FXSTB, FXSTC and FXDWG with Original Equipment brake lines.
91364-03
Chrome.
10800039
Edge Cut.
E. THROTTLE CABLE CLIP
Tie up the loose ends to complete your custom ride. When matched to Original Equipment black cables or available braided cables, these decorative clips link the throttle and idle cables for a clean custom look.
Fits ’84-later models (except ’15-later XG, ’08-later Touring and Trike, FLSTNSE, FLSTSE2/3 and FXSBSE).
91274-04
Chrome.
10800033
Edge Cut.
F. THROTTLE AND IDLE CABLE ADJUSTER DUST
COVERS – CHROME
Replace the black rubber throttle and idle cable boots with brilliant chrome. These two-piece “ball-milled” Dust Covers offer a striking contrast to Original Equipment black cables and a natural finishing touch when installing braided cables.
Easy to install with included hardware.
64115-04
Chrome.
Fits ’96-’07 Touring models (except FLHRS with Original
Equipment handlebar) and ’96-later FXSTB and FLSTC and
’05-later FLSTN. Will fit ’05-later Softail
®
models (except FLS,
FLSTFB, FLSTNSE, FXS, FXSB and FXSBSE) equipped with a separate purchase of a Front Turn Signal Relocation Kit.
E. THROTTLE CABLE CLIP – CHROME E. THROTTLE CABLE CLIP – EDGE CUT
F. THROTTLE AND IDLE CABLE ADJUSTER DUST COVERS – CHROME
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
604
CONTROLS
COMFORT, STYLE OR BOTH?
Every person is unique. Your overall height, arm reach, upper body length and riding style all dictate your relationship to the bike’s controls. Add in the desire for a unique, custom look and your handlebar options multiply exponentially.*
CHOOSING YOUR HANDLEBAR
RISE is the vertical distance between a handlebar’s tip and its base. Adding risers to bars that sit too low can help put hand grips into your sweet spot.
PULL BACK is the distance the handlebar tips come back toward the rider. Greater pull back can eliminate the long reach to the bar for a shorter rider.
WIDTH is measured from tip-to-tip. Make sure the bar isn’t too wide so it pulls your hands off the grips when turning.
KNURL CENTER is the distance between the centerline of the bar’s knurling. The measurement should match the riser dimension to maximize clamping pressure.
Knurl
Centers
Base
Width
YOUR RIDING POSITION
Tip To Tip
Rise
Pull
Back
DRAG HANDLEBAR
Narrow, flat and more aggressive, drag bars provide a straight elbow and neutral hand and wrist position.
For maximum comfort, drag bars can be positioned with curved or straight risers to minimize stretch to the controls.
APE HANGER & TALLBOY
®
HANDLEBAR
Tall and wide, ape hanger and Tallboy
®
handlebars provide a classic “fists-in-the-wind” look and can add long-haul comfort for riders with long arms. Because handlebar height is regulated in many areas, check local laws before installing a tall handlebar.
BEACH HANDLEBAR
Low and wide, a beach bar spreads your arms and gives you room to breathe. Ideal for the rider with long arms, beach bars can be a little too wide for many riders. While selecting a bar, make sure you can reach the hand controls when the handlebar is fully turned.
FIT SHOP TIPS
Your Dealer can help you with this simple experiment and recommend a handlebar that matches your ideal riding position. For more information, visit www.harley-davidson.eu/
mydreamharley
To get an idea how well your bike fits you, you can try this simple test. Block your bike so that it is level and stable, sit on the bike in your normal riding position and let your hands and arms hang down at your side. Now, close your eyes and reach out to where you think your ideal handlebar should be. With your hands grasping an imaginary handlebar, place them where they feel the best… that is, rotate your wrists to a natural position and spread your hands to a width that feels comfortable. Now open your eyes. This is where your bike’s hand grips should be.
* NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake hose for some models. Handlebar height is regulated in many areas.
Check local laws before installation.
Not all products are available in all countries – please consult your dealer for details.
CONTROLS
605
HANDLEBAR DIMENSIONS
(IN CENTIMETERS)*
Bar
Diameter Width
3.2
3.2
2.5
2.5
2.5
2.5
2.5
3.2
3.2
2.5
2.5
3.2
2.5
3.2
3.2
2.2
2.5
2.2
2.5
2.5
3.2
2.5
3.2
2.5
2.5
2.5
2.5
2.5
3.2
2.2
3.2
2.5
2.5
2.5
2.5
3.2
3.2
2.5
2.5
2.5
2.5
3.2
2.5
2.5
2.5
–
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
79.4
79.4
72.4
72.4
85.7
85.7
76.8
80.0
79.4
76.8
73.7
76.2
77.5
76.2
81.3
85.7
77.5
81.9
81.9
80.6
65.4
73.0
82.6
80.6
81.3
65.4
82.6
77.5
72.4
74.3
77.5
80.6
81.3
77.0
85.7
80.6
76.2
90.2
76.8
78.1
77.5
76.8
73.2
73.7
78.7
80.6
72.4
78.7
71.1
80.6
77.5
78.1
81.3
82.6
75.6
78.7
76.8
76.8
76.2
78.1
78.7
Handlebar Kit
55800224
55800233
55800237
55800247
55800252
55800305
55800332
55800379
55800386
55800388
55840-04A
55845-04A
55857-10B
55859-10B
55861-09
55862-09
55864-09
55865-09
55898-07
55800027
55800032
55800035
55800037
55800050
55800058
55800082
55800094
55800099
55800103
55800180
55800181
55800182
55800188
55800198
55800215
55954-00
55967-08
55975-08A
55977-09
55980-10A
55985-10
55988-04
55997-06
56004-00
56012-09
56014-09A
56021-04B
56029-00
55901-05
55908-04
55914-98
55919-01
55919-82T
55920-83B
55924-14
55924-08
55924-97
55933-97
55943-05
55947-00
55947-08
Pull
Back
18.4
18.4
12.1
12.1
18.4
18.4
15.9
24.1
12.7
15.9
9.5
4.8
14.4
4.8
10.8
18.4
18.4
26.7
26.7
13.3
10.9
9.5
17.8
16.5
17.8
10.9
14.0
11.7
17.3
9.7
11.7
16.8
17.8
4.4
18.4
17.8
22.9
12.1
14.6
17.8
14.0
14.6
15.9
6.4
14.6
10.5
12.1
14.6
15.9
16.5
27.9
19.1
22.9
22.9
14.6
16.5
15.9
15.9
23.5
20.3
22.9
Rise
28.6
28.6
9.5
9.5
41.3
31.1
24.8
17.1
30.5
24.8
0.0
21.0
12.1
21.0
30.5
26.0
30.5
24.1
24.1
32.4
21.1
24.1
25.4
17.1
20.3
21.1
0.0
13.3
25.1
0.0
13.3
17.4
19.7
16.0
24.8
17.8
24.1
29.2
17.1
0.0
12.1
17.1
14.5
3.8
15.2
15.2
9.5
15.2
25.4
17.1
20.3
31.1
12.7
12.7
24.1
26.7
24.8
24.8
14.0
21.0
14.0
Finish
Satin Black
Polished SST
Chrome
Polished SST
Chrome
Polished SST
Polished SST
Gloss Black
Chrome
Gloss Black
Polished SST
Polished SST
Satin Black
Satin Black
Satin Black
Satin Black
Satin Black
Satin Black
Polished SST
Satin Black
Gloss Black
Satin Black
Polished SST
Gloss Black
Polished SST
Satin Black
Chrome
Polished SST
Satin Black
Polished SST
Polished SST
Polished SST
Chrome
Chrome
Gloss Black
Polished SST
Chrome
Polished SST
Polished SST
Chrome
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Chrome
Chrome
Chrome
Satin Black
Polished SST
Satin Black
Polished SST
Polished SST
Polished SST
Polished AL
Satin Black
Chrome
Chrome
Knurl
Width
8.2
8.2
8.9
8.0
8.0
8.9
8.0
8.1
8.1
10.5
8.0
8.2
8.6
8.0
8.0
8.2
8.9
8.2
7.8
8.9
8.2
8.2
8.9
8.9
8.2
8.0
8.0
8.9
8.9
8.5
8.2
7.6
–
8.0
7.6
8.9
8.9
–
8.0
8.0
8.0
8.9
–
8.9
8.0
–
8.0
10.8
8.9
8.9
8.0
8.9
8.9
8.9
8.9
8.9
8.9
8.9
12.1
12.1
8.0
Base
Width
24.5
24.5
19.1
19.1
25.4
25.4
40.0
26.7
29.2
40.0
26.7
21.3
19.7
21.3
29.2
25.4
38.1
31.8
31.8
31.1
21.6
12.1
29.2
22.9
25.4
21.6
12.1
19.1
14.0
22.9
19.1
22.9
28.6
17.8
25.4
34.9
34.9
31.1
22.9
16.5
19.1
22.9
17.8
16.5
19.7
–
19.1
22.2
20.3
22.9
34.3
38.1
34.3
36.2
33.7
39.4
40.0
40.0
30.5
47.6
31.8
Handlebar Kit
56032-08
56036-08
56038-05
56039-03A
56046-01
56051-06
56075-07
56079-93
56079-93T
56081-01
56081-82A
56082-83
56085-83A
56085-83T
56093-88A
56094-95
56102-99
56103-08A /
56273-08A
56623-99
56760-04
56787-05
56832-04C
56857-05
56886-07A
56891-12
56902-08
56940-09
56941-09
56942-10B
56947-08
56951-09B
56953-07
56959-08A
56962-07
56110-98
56152-04B
56166-08
56176-08
56180-08
56184-08
56185-98A
56188-00
56224-99A
56557-95
56558-95
56563-95
56569-09
56569-86
56571-08
56571-98A
56964-07
56977-08
56981-07
57209-11
57466-10
57467-11 /
57469-11
57472-11
57474-11
57485-11
Bar
Diameter Width
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
3.2
2.5
2.5
2.5
81.3
76.8
64.8
67.9
78.7
78.7
64.8
78.7
76.2
80.0
80.6
69.9
76.2
74.9
69.9
81.3
81.3
2.5
2.5
2.5
2.5
2.5
80.0
69.5
72.4
88.9
88.9
2.5
2.5
3.2
2.5
2.5
2.5
3.2
2.5
2.5
2.5
2.5
2.5
2.5
3.2
3.2
2.5
2.5
2.5
3.2
3.2
3.2
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
2.5
78.1
86.4
85.7
71.1
81.3
77.5
78.1
81.9
86.4
82.6
77.5
73.0
73.2
79.4
90.2
82.8
85.7
82.8
80.0
78.1
79.4
68.6
79.4
68.6
80.0
82.6
79.4
81.3
81.3
67.9
81.3
81.3
78.1
76.2
86.4
68.6
78.7
20.3
8.3
18.4
13.3
16.5
8.3
17.8
16.5
12.7
17.8
8.3
9.5
15.9
12.7
12.1
17.8
18.4
16.8
22.9
20.3
12.7
9.5
22.9
10.2
14.0
17.8
12.7
8.9
8.9
12.1
15.9
14.0
19.1
22.9
12.7
10.2
10.8
8.9
8.6
4.4
4.4
Pull
Back
16.5
11.4
24.1
12.1
14.6
14.6
24.8
10.8
23.5
19.1
16.5
21.0
20.3
19.1
21.0
16.5
16.5
17.8
21.0
29.2
41.3
22.9
22.2
8.9
0.0
25.4
24.8
25.4
8.9
24.1
14.5
30.5
30.5
21.6
31.1
22.9
13.3
14.6
30.5
0.0
15.9
0.0
24.8
25.4
30.5
26.7
26.7
10.2
28.6
28.6
31.1
24.1
24.8
0.0
14.6
19.5
0.0
30.5
30.5
Rise
22.2
8.9
8.3
10.2
15.2
15.2
9.5
14.6
13.3
24.8
25.4
10.8
31.8
43.2
15.2
22.2
22.2
29.2
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models. Handlebar height is regulated in many areas. Check local laws before installation.
Not all products are available in all countries – please consult your dealer for details.
Chrome
Chrome
Chrome
Chrome
Chrome
Polished SST
Polished SST
Polished SST
Gloss Black
Chrome
Chrome
Chrome
Polished SST
Polished SST
Polished SST
Polished SST
Chrome
Gloss Black
Satin Black
Polished SST
Satin Black
Black SST
Chrome
Chrome
Polished SST
Chrome
Chrome
Polished SST
Polished SST
Polished SST
Chrome
Chrome
Chrome
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Polished SST
Chrome
Satin Black
Finish
Chrome
Chrome
Polished SST
Chrome
Polished SST
Polished SST
Satin Black
Polished SST
Chrome
Polished SST
Polished SST
Polished SST
Black SST
Chrome
Polished SST
Polished SST
Polished SST
Polished SST
8.0
8.9
8.9
8.0
12.1
8.2
8.2
8.9
8.9
12.1
8.9
8.0
8.0
8.0
9.9
8.0
8.0
8.0
12.1
8.9
8.2
8.0
8.0
8.0
8.0
8.0
8.9
8.0
8.0
8.0
8.9
8.0
8.9
8.0
8.0
8.0
8.9
–
10.5
8.9
8.9
Knurl
Width
8.0
8.0
12.1
12.1
8.0
8.0
8.0
8.0
8.0
–
8.0
8.0
8.0
8.3
8.9
8.0
–
8.9
47.6
17.8
25.4
–
25.4
17.8
16.5
25.4
43.2
29.2
17.8
12.1
17.8
29.2
31.1
22.9
25.4
22.9
34.3
27.9
29.2
25.4
29.2
21.6
24.1
29.2
29.2
29.2
29.2
16.5
33.0
33.0
38.7
34.9
43.2
21.6
22.9
14.0
26.0
40.6
40.6
Base
Width
25.4
22.9
25.4
16.5
19.7
19.7
30.5
22.9
29.8
22.9
40.0
24.1
8.9
21.0
24.1
25.4
25.4
–
606
CONTROLS
Handlebars
A. REDUCED REACH
®
HANDLEBAR* – SPORTSTER
®
This chrome handlebar is designed to bring the controls closer to the rider for increased comfort. Especially helpful for shorter riders or for riders that prefer a close-to-the-bar riding position.
56021-04B
Chrome.
Fits ’04-later XL883C and XL1200C models. Installation requires separate purchase of additional components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56021-04.
B. REDUCED REACH HANDLEBAR – FXSB SOFTAIL
®
Shaped to provide the ideal balance of pull back and width, this chrome-plated bar places riders closer to the controls for a comfortable upright riding position. When combined with the Original Equipment Softail
®
Breakout
®
curved risers, the
Reduced Reach Handlebar provides an overall pull back of
7.0". The 1.25" diameter handlebar can be internally wired for a clean look.
55800188
Chrome.
Fits ’13-later FXSB models. Separate purchase of additional components required.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800188.
C. REDUCED REACH HANDLEBAR* – FXS BLACKLINE
®
Designed with 4.0" of additional pull back, this two-piece handlebar is shaped to bring the controls closer to the rider.
Not just for the short rider, this sleek bar adapts the riding position to put almost any size rider in an upright, relaxed riding profile. Finished in black, this 1.0" diameter handlebar can be internally wired for a clean look and is styled to match the aggressive stance of the Softail Blackline ® motorcycle.
55800032
Satin Black.
Fits ’11-’13 FXS models. Separate purchase of additional components required.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800032.
A. REDUCED REACH HANDLEBAR – SPORTSTER
B. REDUCED REACH HANDLEBAR – FXSB SOFTAIL
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
C. REDUCED REACH HANDLEBAR – FXS BLACKLINE
CONTROLS
607
Handlebars
D. EXTREME REDUCED REACH
®
HANDLEBAR
Extensively tested with a panel of riders between 5'-0" to
5'-5" tall, this Extreme Reduced Reach Handlebar and recommended riser combination was proven to be the most ergonomically pleasing handlebar for many Dyna
®
and Softail
® models. Shaped to provide the ideal balance of pull back and width, this handlebar produces an overall pull back of 11.0" and a tip-to-tip width of 30.0" when combined with Curved Riser
Kit P/N 56266-09 (sold separately). Your hands fall naturally in place and the narrow width reduces your stretch while making low-speed turns and parking lot maneuvers.
56102-99
Fits ’06-later Dyna and ’00-later Softail models
(except FXCW, FXCWC, FXS, FXSB, FXSTD and Springer™).
All models require separate purchase of additional installation components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56102-99.
E. HERITAGE SOFTAIL
®
CLASSIC HANDLEBAR*
Chrome-plated version of the stock bar. Replaces Original
Equipment P/N 56569-86.
56623-99
Chrome.
Fits ’86-later FLSTC models. ’09-later models require separate purchase of cables and brake lines.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56623-99.
D. EXTREME REDUCED REACH HANDLEBAR
(SHOWN WITH CURVED RISER KIT)
E. HERITAGE SOFTAIL CLASSIC HANDLEBAR
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
608
CONTROLS
Handlebars
A. BEACH HANDLEBAR*
This beefy 1.25" bar shows off your bike in style! This fat bar allows you to tuck the wires inside the bar for a clean, custom appearance and the highly-polished and chrome-plated bar will get you noticed. Installation requires separate purchase of additional components.
55967-08
Chrome.
Fits ’06-’07 and ’13-later FXDB, ’08-later FXDF, ’01-’05 FXDL,
’99-later FXDWG, ’12-later FLD, ’00-later FXST, FXSTB, FXSTC,
FXSTD, FLS, FLSTC, FLSTF, FLSTFB, FLSTN and ’03-’13 FLHR,
FLHRC, FLHRS models. All models require separate purchase of additional installation components. Does not fit ’08 ABSequipped models, Heated Hand Grips, Hydraulic Clutch Kits,
Handlebar Mounted Gauges, Road Tech™ Radio, Softail
®
Nacelle Kit P/N 67907-96C equipped models.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55967-08.
B. NARROW BEACH HANDLEBAR*
Original Equipment on the ’07 Screamin’ Eagle
®
Fat Boy
® model, this beefy 1.25" handlebar sets the tone for a full-on custom ride. This chrome-plated fat bar combines the low rise and sweeping shape of a beach-style bar with a narrower tipto-tip width for added rider comfort. Factory drilled to allow internal wiring for show-winning style.
56857-05
Chrome.
Fits ’12-later FLD, ’13-later FXDB, ’00-later FXST, FXSTB,
FXSTC, FXSTD, FLSTF, FLSTFB and FLSTC models. All models require separate purchase of Riser Kit P/N 56916-07 and additional installation components. Does not fit with Heated
Hand Grips.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56857-05.
A. BEACH HANDLEBAR (HERITAGE SOFTAIL CLASSIC SHOWN)
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
B. NARROW BEACH HANDLEBAR (FAT BOY SHOWN)
C. HOLLYWOOD HANDLEBAR
( SPORTSTER FORTY-EIGHT SHOWN)
CONTROLS
609
Handlebars
C. HOLLYWOOD HANDLEBAR*
Original Equipment on the Softail Slim ® model, this traditional Hollywood-styled handlebar combines the laid-back riding attitude of the ’40s with a shape that’s perfect for today’s new school stripped-down bobbers. With its limited rise, narrow profile and gentle pull back shape, this bar captures the look of a classic bar without the wide beach bar riding position.
55800050
Gloss Black.
Fits ’10-later XL1200X, ’06-later FXDB, ’10-later FXDWG,
’00-later FLSTC, FLSTF, FLSTFB and ’08-later FLSTN models.
Requires separate purchase of additional installation components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800050.
D. CROSS BONES
®
NARROW BEACH
HANDLEBAR – BLACK*
This black 1.0" handlebar is unique to the FL Softail
®
Springer™ models. The narrow beach bar style captures the attitude of traditional beach bars, without the wide riding position. Finish the blacked-out look with complementing Diamond-Black cables and brake lines. Installation requires separate purchase of additional components.
56940-09
Satin Black.
Fits ’08-’11 FLSTSB and ’05-’07 FLSTSC models. Requires separate purchase of additional installation components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56940-09.
D. CROSS BONES NARROW BEACH HANDLEBAR – BLACK
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
610
CONTROLS
Handlebars
A. SPORTSTER
®
DRAG BAR*
Nothing says minimalist like a classically simple drag bar.
Shaped to give the Nightster™ and Iron 883™ models an aggressive riding profile, this satin black 1.0" Drag Bar features
0" of rise and 4.0" of pull back to provide an excellent combination of forward positioning and wrist control.
55800035
Satin Black.
Fits ’07-later XL models with 2.2 or 3.3 gallon fuel tank
(except XL1200X). Does not fit XL883C, XL883R, XL1200C,
XL1200L, XL1200R, ’11-later XL883L or models equipped with 4.5 gallon large capacity fuel tank. All models require separate purchase of additional components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800035.
B. FAT DRAG HANDLEBAR*
Complete the transition to the “dark side.” Elegant satin-black finished handlebar retains the comfortable contour of the
Original Equipment bar and complements the black finished hand controls and mirrors.
55977-09
Satin Black.
Fits ’08-later FXDF, ’10-later FXDWG, ’13-later FXDB, ’99-later
FXST, FXSTB and ’10-later FLSTF and FLSTFB models. All models require separate purchase of additional components.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55977-09.
A. SPORTSTER DRAG BAR – SATIN BLACK
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
B. FAT DRAG HANDLEBAR – SATIN BLACK
C. STREET SLAMMER BAR – CHROME (ROAD KING SHOWN)
CONTROLS
611
Handlebars
C. STREET SLAMMER BAR*
Comfort and attitude in one. This Street Slammer drag bar with 7.0" integrated risers offers a stylish alternative to separate curved risers, bar and handlebar clamp combinations and reduces the stretch required to reach traditional straight bars.
This 1.25" fat bar is factory drilled to accept hidden control wires for a clean custom look. Available in brilliant chrome or satin black finish.
Fits ’06-later FXDB, ’08-later FXDF, ’01-’05 FXDL, ’99-later
FXDWG, ’12-later FLD, ’00-later FXST, FXSTB, FXSTC, FXSTD,
FLS, FLSTC, FLSTN, FLSTF, FLSTFB and ’03-’13 FLHR, FLHRC models. All models require separate purchase of additional installation components. Does not fit Road King
®
Models equipped with cruise control, ’08 ABS-equipped models,
Heated Hand Grips, Hydraulic Clutch Kits, Handlebar Mounted
Gauges, Road Tech™ Radio, Softail
®
Nacelle Kit P/N 67907-
96C equipped models.
55975-08A
Chrome.
55985-10
Satin Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55975-08 or 55985-10.
Shown with:
STREET SLAMMER HANDLEBAR COVER
Required for installation of Street Slammer Bar P/N 55975-08A or 55985-10 on ’03-’13 Road King models. All models require separate purchase of additional installation components.
55854-07
55876-10
Chrome.
Gloss Black.
C. STREET SLAMMER BAR – SATIN BLACK (FAT BOY SHOWN)
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
612
CONTROLS
Handlebars
A. IRON 883™ HANDLEBAR – SATIN BLACK
Add an edgy touch to your Sportster ® model. Featuring the same shape, rise and pull back of the Iron 883™ Original
Equipment stainless pull back handlebar, this satin black bar provides a choice in customizing style without the need to change cables and brake lines. Original Equipment on XL883N and XL1200X models.
55800345
Fits ’07-later XL883L, XL1200C, XL1200T and XL1200V models. Installation requires separate purchase of additional components. Original Equipment on XL883N and XL1200X models.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800345.
B. MINI-APE HANDLEBAR*
Raise your fists to the wind. This 1.0" diameter Mini-Ape
Handlebar features a conservative rise and bend for rider comfort and a chrome or satin black finish that complements the aggressive look of the Nightster™ and Street Bob
®
models.
Fits ’07-later XL883L, XL883N, XL1200L, XL1200N, XL1200T,
XL1200V and XL1200X models. Also fits ’06-later FXDB and
’96-’05 FXDWG models with Original Equipment handlebar
P/N 58079-93. XL models require separate purchase of additional components.
56079-93T
Chrome.
56075-07
Satin Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56079-93 or 56075-07.
NEW
A. IRON 883 HANDLEBAR – SATIN BLACK
B. MINI-APE HANDLEBAR – CHROME
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
B. MINI-APE HANDLEBAR – SATIN BLACK
C. CHIZELED HANDLEBAR – CHROME
CONTROLS
613
Handlebars
C. CHIZELED HANDLEBAR*
Achieve ultimate cutting edge style. The Chizeled Bar features the edgy profile of the classic “Z” bar and combines the handsup feel of a mini-ape with the narrow width of a drag bar. The result? A classic chopper attitude. The 1.0" bar replaces mitered and welded corners with cast seamless 90° bends for added strength and style. The cast elbows eliminate sharp internal bends and the bar features removable Bar & Shield plugs to simplify internal wiring.
Fits ’07-later XL883L, XL883N, XL1200L, XL1200N, XL1200T,
XL1200V and XL1200X models. Also fits ’06-later FXDB and
’96-’05 FXDWG models with Original Equipment Handlebar
P/N 58079-93. XL models require separate purchase of additional components.
55800103
55800198
Satin Black.
Chrome.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800103 or 55800198.
D. FAT MINI-APE HANDLEBAR – FXSB SOFTAIL*
Give your ride a touch of old school style with this 1.25" Fat
Ape Handlebar. The 12.0" high bar provides the look and attitude you dream about, but rema ins comfortable during long rides. This Mini-Ape Bar is factory drilled to accept internal wiring for a clean look. Kit includes chrome-plated handlebar, riser and clamp with gauge mount.
55800252
Chrome.
Fits ’13-later FXSB models. Separate purchase of additional components required.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800252.
C. CHIZELED HANDLEBAR – SATIN BLACK
D. FAT MINI-APE HANDLEBAR – FXSB SOFTAIL
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
614
CONTROLS
Handlebars
A. 16" FAT APE HANDLEBAR KIT WITH RISER*
Reach for the sky. This brawny 1.25" Ape Handlebar is the ideal choice for the long-armed rider or anyone looking for that classic “fists in the wind” riding profile. Factory drilled to allow internal wiring, the show-quality chrome or satin-black finish complements your bike’s overall design sense. This 16.0" high bar and riser combination provides the look you crave around town and the bar can be rotated in the clamp and locked down to place your hands in your ideal open-road riding position.
Handlebar kit includes matching riser and custom handlebar clamp that conceals the wire exit for a clean look.
Fits ’99-later FXDWG, ’06-later FXDB, ’08-later FXDF, ’12-later
FLD, ’00-later FXST, FXSTB, FXSTC, FLS, FLSTC, FLSTF,
FLSTFB, FLSTN, FXCW, FXCWC and ’03-later FLHR and
FLHRC models (except ’14-later models equipped with H-D ®
Detachables™ Docking Kit P/N 52300131). All models require separate purchase of additional installation components.
Does not fit with Heated Hand Grips, Hydraulic Clutch Kits, handlebar-mounted gauges, Road Tech™ Radio or Softail
®
Nacelle Kit P/N 67907-96C.
56942-10B
Chrome.
55857-10B
Satin Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56942-10 or 55857-10.
Shown with
ROAD KING
®
HANDLEBAR COVER FOR
1.25" APE HANDLEBARS
Required for installation of 12.0" and 16.0" Fat Ape Handlebars on Road King
®
models.
Fits ’03-’13 FLHR and FLHRC models equipped with handlebars P/N 56942-10B, 55857-10B, 56832-04C and 55859-10B.
55879-10
55881-10
Chrome.
Gloss Black.
Fits ’14-later FLHR and FLHRC models equipped with handlebars P/N 56942-10B, 55857-10B, 56832-04C and 55859-10B.
Does not fit FLHRSE models.
55800289
Chrome.
55800290
Gloss Black.
A. 16" FAT APE HANDLEBAR KIT WITH RISER – CHROME
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
A. 16" FAT APE HANDLEBAR KIT WITH RISER – SATIN BLACK
B. 12" FAT MINI-APE HANDLEBAR KIT WITH RISER – CHROME
CONTROLS
615
Handlebars
B. 12" FAT MINI-APE HANDLEBAR KIT WITH RISER*
Big and beefy in the chopper tradition, this 1.25" Mini-Ape
Handlebar is the perfect finish to an “old school” ride. Factory drilled to allow internal wiring, the show-quality chrome or satin-black finish reflects your attention to custom details.
This 12.0" high bar and riser combination provides the look and attitude you dream about, but remains comfortable over the long haul. Handlebar kit includes matching riser and custom handlebar clamp that conceals the wire exit for a clean look.
Fits ’99-later FXDWG, ’06-later FXDB, ’08-later FXDF, ’12-later
FLD, ’00-later FLS, FLSTC, FLSTF, FLSTFB, FLSTN, FXCW,
FXCWC, FXST, FXSTB, FXSTC and ’03-later FLHR and FLHRC models. All models require separate purchase of additional installation components. Does not fit with Heated Hand Grips,
Hydraulic Clutch Kits, handlebar-mounted gauges, Road
Tech™ Radio or Softail
®
Nacelle Kit P/N 67907-96C.
56832-04C
Chrome.
55859-10B
Satin Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56832-04 or 55859-10.
B. 12" FAT MINI-APE HANDLEBAR KIT WITH RISER – SATIN BLACK
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
616
CONTROLS
Handlebars
A. ROAD KING
®
FAT HANDLEBAR
Similar to Original Equipment handlebar on the ’14 CVO™
Road King ® model, this beefy 1.25" handlebar places the rider in a laid-back riding posture. This handlebar provides 2.0" of additional pull back and a 1.0" lower hand position than the
Original Equipment Road King bar. The 1.25" diameter bar allows you to tuck the wires inside the bar for a clean, custom look.
Fits ’14-later Road King models. All models require separate purchase of additional components for installation.
55800386
Chrome.
55800388
Gloss Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800386 or 55800388.
Also available:
HIDDEN FAT BAR RISER KIT
This riser enables installation of the 1.25" Road King Fat
Handlebar on FLHR and FLHRC models. Riser fits beneath the Original Equipment handlebar cover to maintain the classic nacelle headlamp style. Riser components are zinc plated for corrosion protection.
55900067
Fits ’14-later FLHR and FLHRC models with 1.25" diameter handlebars.
B. ROAD KING FAT HANDLEBAR – ’08-’13 MODELS*
Similar to Original Equipment handlebar on the ’08 CVO Road
King model, this beefy 1.25" chrome handlebar is designed to be compatible for use with TGS-equipped Road King models.
This handlebar provides a flatter hand position, 2.0" more rise than the stock bar and allows you to tuck the wires inside the bar for a clean, custom look.
56032-08
Chrome.
Fits ’08-’13 Road King models. All models require separate purchase of additional components for installation. Does not fit with Heated Hand Grips, Handlebar-mounted Gauges or
Road Tech™ Riser Mount Radio Kit. Does not fit ’08 ABSequipped models.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56032-08.
C. ROAD KING/ROAD GLIDE ® REDUCED REACH ®
HANDLEBAR*
This 1.0" diameter chrome bar has 2.0" more pull back compared to the stock Road King handlebar. Accepts internal wiring for a clean look. The neutral hand position is comfortable for the long haul and the narrow width and pull back design produces a major ergonomic change.
56166-08
Chrome.
Fits ’08-later FLHR, FLHRC and ’08-’13 FLTR, FLTRU and
FLTRX models. Does not fit ’08 ABS-equipped models.
Heated Hand Grips with internal switch wiring, Handlebarmounted Gauges or Road Tech Riser Mount Radio kit. All models require separate purchase of additional components for installation.
56152-04B
Chrome.
Fits ’02-’07 Road King models. All models require separate purchase of additional components for installation.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56166-08 or 56152-04.
NEW
A. ROAD KING FAT HANDLEBAR
B. ROAD KING FAT HANDLEBAR – ’08-’13 MODELS
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
C. ROAD KING/ROAD GLIDE REDUCED REACH HANDLEBAR
D. ROAD KING/ROAD GLIDE TALLBOY HANDLEBAR
E. ROAD KING/ROAD GLIDE TALLBOY HANDLEBAR – ’96-’07 MODELS
CONTROLS
617
Handlebars
D. ROAD KING
®
/ROAD GLIDE
®
TALLBOY
®
HANDLEBAR*
Designed to provide extra touring comfort for the Road King narrower compared to the stock Road King handlebar.
® rider, this 1.0" diameter chrome bar is 2.0" higher and 1.5"
56180-08
Chrome.
Fits ’08-later FLHR, FLHRC, ’15-later FLRT and ’08-’13 FLTR,
FLTRU and FLTRX models. Does not fit with ’08 ABSequipped models. Heated Hand Grips with internal switch wiring, Handlebar Mounted Gauges or Road Tech™ Riser
Mount Radio kit. All models require separate purchase of additional components for installation.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56180-08.
E. ROAD KING/ROAD GLIDE TALLBOY HANDLEBAR –
’96-’07 MODELS*
Designed to provide extra comfort for the Road King rider, this chrome bar is 4.5" higher and 2.0" narrower than the stock handlebar found on ’96-’99 Road King models and 3.5" higher and 1.5" narrower than stock handlebar on ’00-’01 Road King models. Many models require no additional cables or hoses for installation.
55954-00
Chrome.
Fits ’96-’07 Road King and ’02-’07 Road Glide
®
models.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55954-00.
F. ROAD KING/ROAD GLIDE HERITAGE STYLE
HANDLEBAR*
Designed to provide extra touring comfort for the Road King or Road Glide rider, this 1.0" diameter stainless steel bar has
3.0" more pull back compared to the stock ’08-’13 Road King handlebar. Heritage Bar has the same dimensions as the
’14-later Road King Original Equipment bar.
Fits ’08-later FLHR, FLHRC and ’08-’13 FLTR, FLTRU and
FLTRX models. All models require separate purchase of additional components. Heated Hand Grips with internal switch wiring, Handlebar Mounted Gauges or Road Tech Riser
Mount Radio.
55864-09
56902-08
Satin Black.
Polished Stainless Steel.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55684-09 or 56902-08.
F. ROAD KING/ROAD GLIDE HERITAGE STYLE HANDLEBAR
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
618
CONTROLS
Handlebars
A. ROAD GLIDE
®
HANDLEBAR – GLOSS BLACK*
Come over to the dark side. This gloss black 1.25" handlebar features the same shape, rise and pull back dimensions as the
Original Equipment bar, so no additional cables or lines are required.
55800379
Fits ’15-later Road Glide ® models.
B. ROAD GLIDE FAT MINI-APE HANDLEBAR –
’08-’13 MODELS*
Hang ’em high. Across town or cross country, this classicshaped Fat Mini Ape Handlebar adds a touch of old school style to your modern urban bagger. Designed for Road Glide models, this beefy 1.25" bar features 10.0" of rise and minimal pull back that help achieve a cool yet comfortable riding profile. The brilliant chrome finish and concealed wiring provide a show-quality look that’s built for the open road. The kit includes a custom riser designed for installation on Road
Glide models.
55800094
Chrome.
Fits ’09-’13 FLTR, FLTRX and FLTRU models. All models require separate purchase of additional installation components. Does not fit with Heated Hand Grips, Hydraulic
Clutch Kits or Handlebar-mounted Gauges.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 55800094.
NEW
A. ROAD GLIDE HANDLEBAR – GLOSS BLACK
’15-LATER MODELS
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
B. ROAD GLIDE FAT MINI-APE HANDLEBAR –
’09-’13 MODELS
C. BAT WING MINI-APE HANDLEBAR – CHROME
CONTROLS
619
Handlebars
C. BAT WING MINI-APE HANDLEBAR
Throw your fists in the air with these 12.0" ape hangers.
Shaped to rest your hands just above the top of the classic
Bat Wing fairing, these bars feature a tall stance and minimal amount of pull back that help to achieve a cool yet comfortable riding profile. Finished in brilliant chrome or satin black, these 1.0" handlebars accept internal wiring for a clean look.
Fits ’09-later Electra Glide
®
, Street Glide
®
and FLHTCUTG models (except ’10-’13 FLHTK and CVO™ models). All models require separate purchase of additional components for installation. ’09-’13 FLHX and models with fairing-mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing Plugs. Not for use with heated hand grips.
57474-11
57485-11
Chrome.
Satin Black.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 57474-11 or 57485-11.
C. BAT WING MINI-APE HANDLEBAR – SATIN BLACK
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
620
CONTROLS
Handlebars
A. BATWING SATIN BLACK HANDLEBAR*
Come over to the dark side. This satin black handlebar features the same shape, rise and pull back dimensions as the Original
Equipment bar, so no additional cables or lines are required.
55861-09
Fits ’08-later FLHT, FLHTC, FLHTCU, FLHTK, FLHX, FLHXS and ’09-later FLHTCUTG models. No additional cables or lines required.
B. BATWING TALLBOY
®
HANDLEBAR*
This 1.0" chrome-plated handlebar is shaped to provide a comfortable reach for a rider with longer arms. Handlebar is approximately 1.5" taller and 2.0" further from the rider than the Original Equipment Electra Glide handlebar.
56184-08
Chrome.
Fits ’08-later Electra Glide, Street Glide
®
and FLHTCUTG models (except ’10-’13 FLHTK and CVO™ models). All models require separate purchase of additional components.
’09-’13 FLHX and models with fairing-mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing
Plugs. Does not fit ’08 ABS-equipped models.
56964-07
Chrome.
Fits ’02-’07 Electra Glide and Street Glide models. All models require separate purchase of additional components. FLHX and models with fairing mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing Plugs
P/N 732 (Qty 2) and 755 (Qty 2). Does not fit models equipped with Heated Hand Grips with internal switch wiring,
Hydraulic Clutch Kits.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56184-08 or 56964-07.
A. BATWING SATIN BLACK HANDLEBAR
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
B. BATWING TALLBOY HANDLEBAR – (’08-LATER MODEL SHOWN)
C. ELECTRA GLIDE CHROME HANDLEBAR
CONTROLS
621
Handlebars
C. ELECTRA GLIDE
®
CHROME HANDLEBAR
This high-quality chrome-plated handlebar is designed to be compatible for use with TGS-equipped ’08 Electra Glide ® models. Replace your stock polished bar with this 1.0", chrome handlebar that allows you to tuck the wires inside the bar for a clean, finished look.
56036-08
Chrome.
Fits ’08-later Electra Glide and Street Glide ® models (except
CVO™). Does not fit Trike models. All models require separate purchase of additional components. Does not fit
’08 ABS-equipped models.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56036-08.
D. BATWING REDUCED REACH
®
HANDLEBAR*
These high-quality, handlebars are designed to bring the controls 2.0" closer to the rider for increased comfort.
Especially helpful for shorter riders or those with short arms.
56176-08
Chrome.
Fits ’08-later Electra Glide, Street Glide and FLHTCUTG models (except ’10-’13 FLHTK and CVO). All models require separate purchase of additional components. ’08-’13 FLHX and models with fairing-mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing Plugs.
55914-98
Polished Stainless.
Fits ’02-’07 Electra Glide and Street Glide models. All models require separate purchase of additional components. ’08-’13
FLHX and models with fairing-mount mirrors require separate purchase of handlebar-mounted mirrors and Fairing
Plugs P/N 732 (Qty 2) and 755 (Qty 2). Does not fit models equipped with Heated Hand Grips with internal switch wiring,
Hydraulic Clutch Kits.
See your Dealer for cables, lines and additional installation components required, or visit www.harley-davidson.eu/mydreamharley and search part number 56176-08 or 55914-98.
D. BATWING REDUCED REACH HANDLEBAR
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
622
CONTROLS
RIDER BASICS
You may think you are perfectly happy with the way your bike is adjusted. But that doesn’t mean that it is correctly set up for you. We get used to our bikes — our muscles become trained and we end up accommodating the bike. It is far better to take the time to make the bike accommodate you.
If you are satisfied with your handlebar’s width and wrist position, but wish it was just a little higher, lower or closer to you, your dealer can recommend a set of handlebar risers that move the bar into your comfort zone.
ADJUSTING YOUR HAND POSITION
STOCK HANDLEBAR
Just about every model of Harley-Davidson
®
motorcycle comes with a different stock handlebar. Selected to complement the style of the bike, the handlebar may be the ideal shape for many riders, but of course, not everyone has the same physical characteristics.
STOCK HANDLEBAR WITH RISERS
If the stock handlebar has the correct width and hand position for you, but seems just a little too far away, we offer riser kits that bring the controls within reach.
Straight and curved risers are available for many model and handlebar combinations.
RISER DIMENSIONS
ORIGINAL EQUIPMENT RISER DIMENSIONS
DESCRIPTION
BAR
DIAMETER
(IN)
Touring & Trike
Softail – FLSTC & FLS
Softail – FLSTF & FLSTFB
Softail – FLSTN
Softail – FLSTSB
Softail – FLST
Softail – FLSTSE
Softail – FXSB
Softail – FXSBSE
Softail – FXST
Softail – FXSTC
Softail – FXSTB
Dyna – FLD
Dyna – FXD
Dyna – FXDC
Dyna – FXDB
Dyna – FXDL & FXDB
Dyna – FXDWG
Dyna – FXDF & FXDWG
XL – 883C & 1200C
XL – 883N & 1200N
XL – 883L & 883R
XL – 1200L, 1200CP & 1200V
XL – 1200X
VRSC – VRSCD & VRSCDX
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.00
1.25
1.25
1.25
1.25
1.25
1.00
1.00
1.00
1.00
1.00
1.25
1.00
1.00
1.00
3.10
1.86
1.86
1.00
4.39
2.27
5.00
2.28
4.00
2.00
4.43
1.94
6.00
HEIGHT
(IN)
1.70
1.94
2.40
4.45
2.60
1.86
4.73
2.07
2.07
1.86
0.94
2.68
PULL BACK
(IN)
0.00
0.39
0.87
1.30
0.00
0.00
FINISH
Cast Alum
Chrome
Chrome
Chrome
Black
Chrome
1.18
0.00
0.00
n/a
1.61
0.60
0.60
0.60
1.15
0.00
1.50
0.39
0.00
1.13
0.00
0.00
0.00
n/a
0.40
Chrome
Chrome
Chrome
Polished Alum
Chrome
Chrome
Chrome
Black, Wrinkle
Chrome
Polished Alum
Polished Alum
Chrome
Black, Gloss
Chrome
Black, Wrinkle
Black
Chrome
Black, Gloss
Black
ACCESSORY RISER DIMENSIONS*
KIT P/N DESCRIPTION
55996-09
56269-09
Black Fat Risers
Curved Pull Back, 4.0"
56267-09
Curved Pull Back, 6.0"
56066-82A Curved Riser, 4.0"
56266-09
Curved Riser, 6.0"
55900023
Deluxe Pull Back Riser
56931-10
Fat One-Piece Riser, Black
56929-10
56916-07
Fat One-Piece Riser, Chrome
Fat-Bar Risers
46809-09
Riser Kit for Nacelle
56789-05
Road King Fat Riser
56296-05
Slotted Riser
56063-82A Straight Riser, 4.0"
56223-98
Straight Riser, 6.0" 1.00
55900008
VRSCF H’bar Replacement Riser 1.00
55900067
FLHR Hidden Riser Kit 1.25
1.25
1.25
1.00
1.25
1.00
1.00
BAR
DIAMETER
(IN)
1.25
1.25
1.25
1.00
1.00
1.00
1.25
4.1
3.6
1.9
1.6
5.2
4.0
6.0
1.2
1.7
HEIGHT
(IN)
PULL BACK
(IN)
5.0
4.0
6.0
4.4
6.0
4.4
4.1
0.6
1.3
1.7
1.5
1.7
0.8
0.0
FINISH
Black, Gloss
Chrome
Chrome
Chrome
Chrome
Chrome
Black, Gloss
0.0
0.0
0.0
0.0
1.5
0.0
0.0
0.6
0.0
Chrome
Chrome
Chrome
Cast Alum
Chrome
Chrome
Chrome
Satin Black
Cast Alum
Riser
Center to
Center
FIT SHOP TIPS
Getting the fit right may be as simple as adjusting the
Original Equipment handlebar and controls. With the bike blocked in the upright position and you in the saddle, your Dealer can loosen the handlebar clamp and rotate the bar for a closer match to your ideal fit.
Once the grips fall naturally to hand, your Dealer can also adjust the hand control lever position. Rotating the switches and levers to a level position puts your wrists in a relaxed position and reduces the strain of lifting your fingers to reach a too-high lever.
Here are a few options to consider when outfitting your bike to fit you.
Find your model and flip to the pages for more information. For more details, visit www.harley-davidson.eu/
mydreamharley.
* NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake hose for some models. Handlebar height is regulated in many areas.
Check local laws before installation.
Not all products are available in all countries – please consult your dealer for details.
A. FAT RISER KIT – CHROME
B. CURVED PULL BACK FAT RISERS – 4"
A. FAT RISER KIT – GLOSS BLACK
B. CURVED PULL BACK FAT RISERS – 6"
CONTROLS
623
Handlebar Risers
A. FAT RISER KIT*
This riser features a one-piece base that is designed for use with internally-wired 1.25" handlebars and provides a skirt that conceals the wiring’s exit from the bar. The matching handlebar clamp ties it all together. Available in mirror-chrome or gloss black finish, the kit includes riser, matching handlebar clamp and clamp hardware.
Fits most 1.25" diameter handlebars. Does not fit FXSB,
FXSBSE and Springer™ models. Requires separate purchase of additional components. Riser height 4.1".
56929-10
56931-10
Chrome.
Gloss Black.
B. CURVED PULL BACK FAT RISERS*
These chrome-plated Curved Pull Back Risers provide a comfortable riding position for those who like the shape, width and hand position of their current handlebar, but wish it was closer. For an ergonomically-friendly ride, these risers can be combined with a Harley-Davidson ® Reduced Reach and to plant the feet firmly on the ground.
® Seat and
Profile
®
Low suspension components to reduce arm stretch
Fits most 1.25" diameter handlebars. Does not fit FXSB,
FXSBSE and Springer models. Requires separate purchase of additional components.
56269-09
56267-09
4" Curved Riser.
6" Curved Riser.
C. FAT BAR RISER KIT*
Go phat with bold chrome-plated risers. Hidden fasteners create a clean, seamless look. Kit includes all necessary mounting hardware.
56916-07
Fits most 1.25" diameter handlebars. Does not fit FXSB,
FXSBSE and Springer models. Requires separate purchase of additional components. Riser height 3.6".
D. FAT HANDLEBAR RISER KIT – BLACK*
Add a splash of darkness to your front end with these blacked out risers. First introduced on the FXDF model, these risers feature a gloss black finish that will look good with any black or chrome bar.
55996-09
Fits most 1.25" diameter handlebars. Does not fit FXSB,
FXSBSE and Springer models. Requires separate purchase of additional components. Riser height 5.0".
C. FAT BAR RISER KIT
D. FAT HANDLEBAR RISER KIT – BLACK
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
624
CONTROLS
Handlebar Risers
A. SOFTAIL SLIM
®
PULL BACK RISER KIT*
Ideal for riders with a short reach or for those that prefer an upright riding position, these curved risers and the matching handlebar clamp are shaped to put the Original Equipment
Softail Slim
®
handlebar closer to the rider. Designed for easy installation, these 4.5" high risers are compatible with the stock control cables for a low-cost conversion. Provides 1.75" of rise and 1.5" of additional pull back when compared to the stock FLS riser.
55900023
Fits most ’12-later FLS models with no additional components. ’15-later FLS models equipped with ABS brakes require separate purchase of Brake Line P/N 41800300. Also fits most 1.0" diameter handlebars with separate purchase of additional components. Does not fit Springer™ models.
Riser height 4.5".
B. HANDLEBAR RISER KITS*
These chrome-plated risers provide a comfortable riding position for those who like the shape, width and hand position of their current 1.0" handlebar, but wish it was closer. For an ergonomically-friendly ride, these risers can be combined with a
Harley-Davidson ® Reduced Reach ® forward-position seat and
Profile
®
Low suspension components to reduce arm stretch and to plant the feet firmly on the ground. Finish off the look with a Harley-Davidson decorative handlebar clamp kit.
Fits most 1.0" handlebars. Does not fit Springer models.
Installation may require separate purchase of handlebar clamp. Installation also may affect fitment of handlebarmounted instruments.
56066-82A
4.0" Curved Risers.
56063-82A
4.0" Straight Risers.
56266-09
6.0" Curved Risers.
56223-98
6.0" Straight Risers.
C. BILLET HANDLEBAR RISER HARDWARE
Provides a highly polished and plated, machined steel, conical shaped washer. Chrome socket head cap screw is countersunk into the washer upon installation for a very clean look.
Screws are also chrome-plated. Looks great with Original
Equipment or billet triple trees.
63026-05
Fits ’91-later Dyna
®
models (except ’08-later FXDB and
FXDF) and ’97-later FXSB, FXST, FXSTB, FXSTC and FXSTD models. Also fits ’93-’00 FXR models.
D. HANDLEBAR RISER HARDWARE – CHROME
Finish the show-winning look with brilliant chrome hardware.
Manufactured to Original Equipment specifications, this kit replaces the zinc-plated exposed handlebar riser hardware with chrome-plated bolts and chrome lock washers.
63027-05
Fits ’91-later Dyna models (except ’08-later FXDB) and
’97-later FXSB, FXST, FXSTB, FXSTC and FXSTD models.
Also fits ’93-’00 FXR models.
E. POLYURETHANE HANDLEBAR RISER BUSHINGS
These Handlebar Riser Bushings replace the Original
Equipment stacked rubber and zinc washer combination with a long-lasting polyurethane bushing and cover. The long-lasting one-piece bushing can reduce handlebar vibration.
56298-03A
Fits ’83-later Touring models. Kit includes replacement riser bolts. Does not fit Trike models.
56165-03
Fits ’97-’03 XL, ’86-later Dyna (except FXDB) and Softail ®
(except Springer models, FXS and FXSTD) models. ’86-’93 FL
Softail models require use of ’94-later Riser Bolts. Will not fit with Chrome Riser Cup Washer Kit P/N 56486-01.
A. SOFTAIL SLIM PULL BACK RISER KIT
B. HANDLEBAR RISER KIT – STRAIGHT B. HANDLEBAR RISER KIT – CURVED
C. BILLET HANDLEBAR RISER HARDWARE
*NOTE: Installation of some handlebars and risers may require a change in clutch and/or throttle cable and brake lines for some models.
Not all products are available in all countries – please consult your dealer for details.
D. HANDLEBAR RISER HARDWARE – CHROME E. POLYURETHANE HANDLEBAR RISER
BUSHINGS
F. RISER CUP WASHER KIT – CHROME
G. HANDLEBAR CLAMP HARDWARE KIT – CHROME
H. HANDLEBAR CLAMP BOLT COVERS I. SKULL BILLET HANDLEBAR CLAMP
CONTROLS
625
Handlebar Risers
F. RISER CUP WASHER KIT – CHROME
Add a finishing touch to the riser on your bike. This kit includes two styled and chrome-plated washers that replace the standard metal washers below the handlebar risers. Replaces
Original Equipment P/N 56159-73.
56486-01
Fits ’97-’03 XL, ’86-later Dyna ® (except FXDB) and Softail models (except Springer™, FXS and FXSTD). Does not fit with Polyurethane Handlebar Bushings P/N 56165-03.
®
G. HANDLEBAR CLAMP HARDWARE KIT – CHROME
Finish the show-winning look with brilliant chrome hardware.
Manufactured to Original Equipment specifications, this kit replaces the zinc-plated exposed handlebar clamp bolts with chrome-plated socket head cap screws.
94451-05
Fits ’94-later FXSTS, FXSTSB, FXSTD, FXSTDSE, FLSTS,
FLSTSC, FLSTSB and ’05-later FLSTN and FXSTSSE/2 models.
94452-05
Fits ’94-’06 FXDL, ’06 FXD, FXDB, FXDC, FXD35, ’94-’05
FXDWG, FXDWG2/3, FXR2/3, ’94-later FXST, FXSTB, FXSTC,
FLST, ’94-’08 FLSTC, ’94-’06 FLSTF and ’93-’96 FLSTN models.
94453-05
Fits ’95-’13 XL models (except XL Custom, XL883N, XL1200L,
XL1200N, XL1200V and XL1200X) and ’94-’05 FXD, FXDC,
FXDX, FXDXT and FXDS-CONV. models.
94454-05
Fits XL1200L, XL1200N, XL1200T, ’96-’06 XL883C and
XL1200C, ’07-later Dyna, ’00 FXR4, FLSTFSE/2, FLSTSE/2/3,
FXSB and FXSBSE models.
H. HANDLEBAR CLAMP BOLT COVERS
Complete the chrome hand control conversion. These thinwall bolt covers are designed for easy installation over handlebar clamp bolts. The machined brass and chrome-plated covers are corrosion resistant and the internal spring steel retention clip resists vibration and thermal cycling to securely hold the covers in place. Kit includes 4 covers.
94413-04
Fits .3125" socket head handlebar clamp bolts. Does not fit
’15-later XG, ’07-later FLSTF, ’08-later FXCW, FXSB, FXSBSE or Touring models.
I. WILLIE G SKULL BILLET HANDLEBAR CLAMP
Machined from solid billet, this sleek clamp offers a simple style.
56060-01
Willie G Skull.
Fits ’93-’05 FXDL, ’93-’05 FXDWG models, ’84-’99 FXSTC,
’84-’08 FLSTC, ’84-’09 FXST, FXSTB and ’90-’06 FLSTF models with stock or accessory 1.0" diameter handlebars.
Not for use with Road Tech™ Radios.
J. HANDLEBAR CLAMPS
Fits ’74-later XL, FX, FXR, FX Dyna and FX Softail models with stock and accessory 1.0" diameter handlebar (except
’06-later Dyna, XL and Softail models, ’96-later XL Customs and ’99-later FXR).
56178-92TA
Gold “Live to Ride”.
K. CUSTOM HANDLEBAR CLAMPS
Fits ’74-later XL, FX, FXR, FX Dyna and FX Softail models with stock and accessory 1.0" diameter handlebar (except
’06-later Dyna, XL and Softail models, ’96-later XL Customs and ’99-later FXR).
56170-83TA
Classic Chrome.
56567-86B
Bar & Shield.
J. HANDLEBAR CLAMPS K. CUSTOM HANDLEBAR CLAMPS
Model Family Fitment:
V-ROD SPORTSTER
SOFTAIL TOURING
Not all products are available in all countries – please consult your dealer for details.
DYNA
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project