Tait Communications Specifications P25 Phase 1 TM9155 Mobile

Add to my manuals
4 Pages

advertisement

Tait Communications Specifications P25 Phase 1 TM9155 Mobile | Manualzz
TM9155
SPECIFICATIONS
Interoperable,
flexible,
configurable.
With FIPS validated encryption, certified
interoperability, digital audio clarity and
superb build quality, the TM9155 is a
tough, dependable and sophisticated
mobile radio.
KEY FEATURES
}} Tested in a Department of Homeland Security-recognized P25 Compliance
Assessment Program (P25 CAP) laboratory for interoperability and performance
}} Radios can be used on analog, P25 conventional, trunked and simulcast networks
}} FIPS 140-2 certified encryption
}} Tested beyond MIL-STD-810 C, D, E and F
}} A range of analog signaling features - MDC1200 encode/decode* and Two Tone
decode with the purchase of software licenses**
}} Comprehensive scanning features including P25 talk group, priority, dual priority and
editable scanning
}} High temperature display option optimizes screen visibility in hot environments.
*MDC1200 decode includes calling identity display and inhibit/uninhibit functionality.
**Software license option(s) available separately.
© Tait Limited 2015.
TM9155
SPECIFICATIONS
Standard control head
Hand-held control head (HHCH)
Dual head configuration
Remote head configuration
FEATURES AND BENEFITS
Secure communications
Flexible choices
AES encryption certified by the US
National Institute of Standards and
Technology (NIST) or proven DES
encryption can be incorporated
into the TM9155 for highly secure
communications.
Optional dual head configuration means
the TM9155 can dynamically respond to
vehicle and user needs.
These radios can be encrypted fast infield with a Tait Key Fill Device (KFD) or
via Over-the-air Rekeying (OTAR) with
the Tait Key Management Facility (KMF).
Interoperability assured
The TM9155 is tested on other vendors’
networks as part of the P25 Compliance
Assessment Program (P25 CAP). This
offers Public Safety and Government
agencies a multivendor environment.
Analog mode for phased transition
Protect your current analog investment
and migrate to P25 digital at your
own pace. Analog mode allows
communication between various partner
agencies.
Software licenses to suit your needs
Software licenses, such as Trunking, P25
CAI, encryption, location transmission/
display*, Application Programming
Interfaces (APIs) and OTAR are just
some of the options available that enable
you to extend your solution according to
your requirements.
© Tait Limited 2015. Tait_SS_TM9155_v8
Standard control head
Tait mobiles have high and low
temperature LCD options with adjustable
screen contrast for optimized visibility
in any environment. Our standard LCD
is designed for temperatures -22°F to
+ 140°F (-30°C to + 60°C), and our high
temperature LCD operates at +5°F to
+185°F (-15°C to + 85°C).
All TM9100s have a built-in integrated
covert microphone. A mobile GPS
display option integrates the location
function into the radio, so there is no
need for a separate “on dash” unit.
Customizable options include the head
and lens surrounds (color and logo)
and the keymat has four custom keys
available (some restrictions on colors,
fonts and number of characters used).
Hand-held control head (HHCH)
The TM9100 HHCH option is for vehicles
with limited space and is perfect for
covert operations in unmarked vehicles
because it can be stowed out of sight in
a glove compartment or under a seat.
This ideal surveillance solution has a
powerful 10W external speaker, enabling
remote cable kits, visor mounted
microphones and gearshift PTT buttons.
Weight: 6.2oz (175g). Dimensions
(HxWxD): 5.3 x 2.6 x 1.4in (135 x
66 x 35mm). Cable Length: 10.6in
(270mm) coiled length with 15.8in
(400mm) straight tail. 9.2ft (2.8m)
when stretched. 5/10/20ft (1.5/3.1/6.2m)
straight extensions for curly cable.
Display: 2 lines of text/14 characters
or optional large display font: 1 line/12
characters. Full TM9100 display
functionality. Function Buttons:
6 programmable function buttons
(includes emergency button). Keypad:
12 key alphanumeric.
Remote head configuration
The remote-head configuration is
designed for vehicles with limited space,
allowing the radio body to be installed
in the trunk of the car. The standard
control head of the TM9100 series can
be located up to 6m or 12m away with a
single cable and up to 1,094 yards (1km)
away with additional hardware.
Dual head configuration: low-temp,
heated LCD (std PkG)
The dual-head option has two standard
heads connected to the TM9155
mobile radio, allowing for two parties
to communicate in separate areas
of a building or vehicle, such as an
ambulance. The maximum distance
between head(s) and body (cable
length) is 40ft (12m). The maximum
distance between heads (cable length)
is 60ft (18m).
www.taitradio.com
TM9155
SPECIFICATIONS
GENERAL
Frequency ranges
VHF
UHF
Frequency band†
Transmit Power T
Transmit current (typical)
136–174MHz
25W
<5.5A
136–174MHz *
50W
<10.5A
136–174MHz
110W
<30A
350–400MHz*
40W
<8.5A
380-420MHz*
40W
<8.5A <6.5A <8.5A <6.5A
400–470MHz
25W
<8.5A
400–470MHz 450-530MHz
40W 25W
450–520MHz
40W
Transmit
700/800MHz
Receive
762–776MHz 762-776MHz
792–825MHz
30W (<806MHz)
<10A
850–870MHz 850-870MHz
35W (>806MHz)
<10A
Frequency stability
±1.5ppm (-22°F to 140°F/-30°C to 60°C)
Channel/zones
1,000 channels/30 zones
Talk groups
26 talk group lists comprised of up to 50 members each
Scan groups
300 with up to 50 members each, maximum of 2,000 members total
Power supply
10.8–16VDC
Channel spacing
12.5/15/20/25/30kHz
Frequency increment/channel steps
2.5/5/6.25
Dimensions (DxWxH) control head
1.38 x 7.24 x 2.8in (35 x 184 x 71mm)
Dimensions (DxWxH) radio body
25W
6.9x6.3x2.1in (175x160x52mm)
Weight control head
11.6oz (330g)
Weight radio body
25W
42.3oz (1,200g)
Operating temperature
-22°F to 140°F (-30°C to 60°C)
Sealing
IP54 dust and rain
RF connector
50 ohm BNC or Mini UHF
Interface connectors
3 Interface connectors with serial ports
Analog signalling options
MDC1200 encode/decode, Two Tone decode, PL (CTCSS), DPL (DCS)
Remoted length - Standard control head
<20ft or 40ft (6m or 12m) with a single cable <1,094 yards (<1km) with additional hardware
Remoted length - Hand-held control head
<98ft (30m) - using multiple straight extension cables (Talk to Tait for distances beyond 30m)
Install options - Standard control head
U-bracket, security cradle, slide-in bracket, Vehicle installation kit, 10W external speaker, BNC or mini-UHF connector
Install options - Hand-held control head
10W external speaker
30/35/40/50W
7.7x6.3x2.1in (195x160x52mm)
30/35/40/50W
7.7x6.3x2.1in (195x160x52mm)
30/35/40/50W
49.4oz (1,400g)
110W
296oz (8,400g)
TRANSMITTER
VHF/UHF (TIA/EIA 102 AND 603A)
Output power
25W
30W
35W
40W
50W
110W
Modulation limiting
25/30kHz channel
12.5kHz channel
FM hum and noise (typical)
25/30kHz channel
12.5kHz channel
Conducted emissions (typical)
25W, 12W, 5W, 1W
40W, 20W, 15W, 10W
50W, 25W, 15W, 10W
110W
±5kHz
±2.5kHz
-43dB
-38dB
-85dBc
-40dB
-33dB
-75dBc
300–3000Hz +1/-3dB
Audio distortion (analog)
< 3% at 1kHz 60% deviation
50mS
T
© Tait Limited 2015.
30W, 15W, 5W, 2W
35W, 15W, 5W, 2W
±5kHz
±2.5kHz
Audio response (analog)
Transmit attack time (TIA/EIA 102)
700/800MHz (TIA/EIA 102 and 603a) T
In Brazil, maximum transmit power limit available in 800MHz is 25W in accordance with regulations.
www.taitradio.com
TM9155
SPECIFICATIONS
RECEIVER (TYPICAL FIGURES SHOWN)
Analog sensitivity
12dB SINAD
Digital sensitivity (TIA/EIA - 102)
5% BER
Intermodulation rejection (TIA/EIA 102)
Adjacent channel selectivity
25/30kHz channel (TIA/EIA 603a)
12.5kHz channel (TIA/EIA 102)
Spurious response rejection
FM Hum and Noise
25/30kHz channel
12.5kHz channel
Residual audio noise ratio
VHF/UHF
VHF 50W
VHF 110W
700/800MHz
0.28uV (-118dBm)
0.315uV (-117dBm)
0.25uV (-119dBm)
0.28uV (-118dBm)
0.22uV (-120dBm)
-75dB
0.233uV (-120dBm)
-75dB
0.18uV (-122dBm)****
-70dB
0.18uV (-122dBm)
-75dB
-75dB
-65dB
-75dB
-80dB
-70dB
-90dB
-75dB
-65dB
-70dB
-75dB
-65dB
-75dB
-43dB
-40dB
45dB
-43dB
-40dB
45dB
-43dB
-40dB
45dB
-43dB
-40dB
45dB
Audio distortion @ rated audio (3W)
3% @ 1kHz 60% modulation
Optional external speaker output
10W (into 4 ohm)
MILITARY STANDARDS 810C, D, E, F AND G
Low pressure
Method
25/30/35/50/110W
500.4
Procedure
25/30/35/50W
2
Procedure
110W
2
High temperature
501.4
1,2
2
Low temperature
502.4
1,2
2
Temperature shock
503.4
1
1
Solar radiation
505.4
1
-
Rain
506.4
1,3
3
Humidity
507.4
1
-
Salt fog
509.4
1
1
Dust
510.4
1
1
Vibration
514.4
1
1
Shock
516.4
1,6
6
Applicable MIL-STD Method
REGULATORY DATA
USA
VHF
CFR 47 Parts 22, 74, 90, 95J, 90.210
UHF
CFR 47 Parts 22, 74, 90, 95A, 90.210
800MHz
CFR 47 Parts 22, 90
Canada
RSS-119
Europe
EN300 086, EN300 113, EN301 489, EN60950
Australia/New Zealand
AS/NZ54295
FCC
Industrie Canada
VHF
CASTMAB1E
737A–TMAB1E
UHF
CASTMAH5E
737A–TMAH5E
CASTMAH6E
737A–TMAH6E
Type approval
25W
NTIA
Authorized Partners
30/35W
UHF
CASTMAK5F
737A–TMAK5F
40W
UHF
CASTMAH5F
n/a
350-400MHz***
CASTMAH7F
n/a
380-420MHz***
136-174MHz***
50W
VHF
CASTMAB1F
n/a
110W (ERFPA)
VHF
CASTMAB1Z
n/a
Emission designators
10K0F1D, 10K0F1E, 10K0F7D, 10K0F7E, 11K0F3E, 12K7F1D, 16K0F3E,
6K60F2D, 7K70F1D, 8K10F1D, 8K10F1E, 8K10F7D, 8K10F7E, 9K60F2D
Specifications are subject to change without notice and
shall not form part of any contract. They are issued for
guidance purposes only. All specifications shown are
typical.
*Contact your local Tait representative for more
information.
For further information please check with your nearest
Tait office or authorized dealer.
Tait Limited facilities are certified for ISO9001:2008
(Quality Management System), ISO14001:2004
(Environmental Management System) and ISO18001:2007
(Occupational Health and Safety Management System)
for aspects associated with the design, manufacture
and distribution of radio communications and control
equipment, systems and services. In addition, all our
Regional Head Offices are certified to ISO9001:2008.
The word “Tait” and the Tait logo are trademarks of Tait
Limited.
© Tait Limited 2015. Tait_SS_TM9155_v8
www.taitradio.com

advertisement

Was this manual useful for you? Yes No
Thank you for your participation!

* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project

Related manuals

Download PDF

advertisement