advertisement
SUB-ZERO DESIGN GUIDE
Contents
Built-In Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . . 3
PRO 48 Refrigeration . . . . . . . . . . . . . . . . . . . . . . . . . 44
Integrated Refrigeration . . . . . . . . . . . . . . . . . . . . . . 50
Wine Storage . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 64
Undercounter Refrigeration . . . . . . . . . . . . . . . . . . . . 84
Sub-Zero Warranties . . . . . . . . . . . . . . . . . . . . . . . . . 92
IMPORTANT NOTE: Throughout this guide, dimensions may vary by ± 1 /
8
" (3) .
Features and specifications are subject to change at any time without notice. Visit subzero.com/specs for the most up-to-date information.
Throughout this guide, dimensions in parentheses are millimeters unless otherwise specified.
MODEL BI-48S
Built-In Refrigeration 3 subzero.com/specs
Built-In Refrigeration.
For the built-in line, Sub-Zero designers and engineers took a fresh look at everything, inside and out. Exterior refinements include redesigned grilles and lower-profile hinges. Inside, new technology in food preservation makes the built-in line nothing short of revolutionary.
BUILT-IN MODELS
36"
(914)
36"
(914)
36"
(914)
30"
(762)
30"
(762)
36"
(914)
36"
(914)
84"
(2134)
84"
(2134)
84"
(2134)
BI-36R
36"
(914)
BI-36RG
36"
(914)
BI-36F
42"
(1067)
BI-30U
42"
(1067)
BI-30UG BI-36U
48"
(1219)
48"
(1219)
BI-36UG
BI-36UFD BI-36S BI-42S
BI-42SID
KEY FEATURES
• Four distinct design approaches: framed, overlay, flush inset and stainless steel.
• Handle options coordinate with handles of Wolf cooking products.
• Dual refrigeration; two compressors preserve food’s goodness in two sealed compartments.
• Energy efficient; many models are ENERGY STAR ® qualified.
• Advanced water filtration and air purification systems.
BI-42SD BI-48S
BI-48SID
BI-48SD
• NEW!
French door model requires less space for door clearance to accommodate virtually any-size kitchen.
• NEW!
Internal dispenser models provide ice and chilled water inside the refrigerator.
• Crisper and deli drawers form a lower-temperature zone for produce and meats.
• Flip-up grille provides easy access for quick routine maintenance.
• All models are Star-K certified.
Built-In Refrigeration
Built-In Design Options.
A design classic is now even better. Four distinct design approaches provide limitless flexibility for creating a beautiful kitchen. Lower-profile hinges enable the built-in units to blend more seamlessly with surrounding cabinetry.
4
Framed.
Custom cabinetry panels slide into the door to blend into the kitchen design.
Shown with full-length handle and louvered grille option for the traditional Sub-Zero look.
Overlay.
Custom cabinet overlay panels can be combined with unique hardware for design flexibility.
Shown with pro handle option to complement Wolf ranges.
Built-In Refrigeration 5 subzero.com/specs
Flush Inset.
This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf built-in ovens.
Stainless Steel.
For a professional look, this design requires no customization. To complement the look of Wolf ranges, choose the pro handle option shown here.
Built-In Refrigeration
Built-In Models
SPECIFICATIONS
Interior Capacity R cu ft (L) F cu ft (L)
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R 23.5
(665)
BI-36RG
BI-36F
23.4
(663)
OVER-AND-UNDER MODELS
BI-30U
BI-30UG
BI-36U
BI-36UG
BI-36UFD
SIDE-BY-SIDE MODELS
BI-36S
BI-42S
BI-42SID
BI-42SD
BI-48S
BI-48SID
BI-48SD
13.2
13.1
16.4
16.3
15.7
12.4
16.3
15.8
18.8
(374)
(371)
(464)
(462)
(445)
(351)
(462)
(447)
16.0
(453)
19.1
(541)
18.6
(527)
(532)
22.7
4.2
4.2
5.3
5.3
5.3
8.2
8.0
7.9
9.6
(643)
(119)
(119)
(150)
(150)
(150)
(232)
(227)
(224)
7.9
(224)
9.8
(278)
9.6
(272)
(272)
Shipping Weight
ALL REFRIGERATOR / ALL FREEZER MODELS
BI-36R
BI-36RG
BI-36F
OVER-AND-UNDER MODELS
BI-30U
BI-30UG
BI-36U
BI-36UG
BI-36UFD
SIDE-BY-SIDE MODELS
BI-36S
BI-42S
BI-42SID
BI-42SD
BI-48S
BI-48SID
BI-48SD lbs (kg)
420 (191)
430 (195)
406 (184)
462 (210)
476 (216)
515 (234)
529 (240)
529 (240)
538 (244)
582 (264)
608 (276)
608 (276)
630 (286)
656 (298)
656 (298)
All Refrigerator / All Freezer Models
OVERALL DIMENSIONS
36"
(914)
24"
(610)
23 7 /
8
"
(606)
37
1
/ 4 "
(946)
73 3 /
4
"
(1873)
84"
(2134)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4" (102)
23 7 /
8
"
(606)
17"
(432)
2 3 / 8 " (60)
MODELS BI-36R, BI-36RG AND BI-36F
Shipping weights and overall dimensions are based on stainless steel models. For flush inset applications, add
1 /
2
" (13) to door clearance dimensions.
6
Built-In Refrigeration
Over-and-Under Models
OVERALL DIMENSIONS
30"
(762)
24"
(610)
7 subzero.com/specs
36"
(914)
24"
(610)
50 3 / 4 "
(1289)
84"
(2134)
50 3 / 4 "
(1289)
84"
(2134)
23 7 /
8
"
(606)
23"
(584)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4"
(102)
23
7
/ 8 " (606)
14 1 /
2
"
(368)
23
5
/ 8 "
(600)
31 1 /
4
(796)
"
MODELS BI-30U AND BI-30UG
2
3
/ 8 " (60)
23 7 /
8
"
(606)
23"
(584)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4"
(102)
23 7 / 8 " (606)
17"
(432)
23
5
/ 8 "
(600)
37 1 /
4
(946)
"
MODELS BI-36U AND BI-36UG
2
3
/ 8 " (60)
Built-In Refrigeration
Over-and-Under Models
OVERALL DIMENSIONS
36" (914) 24" (610)
Side-by-Side Models
OVERALL DIMENSIONS
36"
(914)
24"
(610)
50 3 /
4
"
(1289)
84"
(2134)
73
3
/ 4 "
(1873)
84"
(2134)
23"
(584)
7
3
/ 4 "
(197)
HEIGHT DIMENSIONS ± 1 / 2 " (13)
23
7
/ 8 "
(606)
4" (102)
23 7 /
8
"
(606)
19
1
/ 2 "
(495)
23 5 /
8
"
(600)
2 3 /
8
"
(60)
MODEL BI-36UFD
Overall dimensions are based on stainless steel models.
For flush inset applications, add 1 /
2
" (13) to door clearance dimensions.
8 1 /
2
"
(216)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4"
(102)
23 7 / 8 " (606)
10 1 /
4
"
(260)
23 7 / 8 "
(606)
22 1 /
4
"
(565)
2 3 /
8
"
(60)
MODEL BI-36S
8
Built-In Refrigeration
Side-by-Side Models
OVERALL DIMENSIONS
42" (1067) 24" (610)
73
3
/ 4 "
(1873)
84"
(2134)
48"
(1219)
73 3 / 4 "
(1873)
84"
(2134)
9 subzero.com/specs
24"
(610)
8 3 /
4
"
(222)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
12 1 /
2
"
(318)
23 7 / 8 "
(606)
26 1 /
4
"
(668)
4"
(102)
23
7
/ 8 " (606)
9
3
/ 4 "
(248)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4" (102)
23 7 /
8
"
(606)
14"
(356)
23 7 /
8
"
(606)
30"
(762)
2 3 /
8
"
(60)
MODELS BI-42S, BI-42SID AND BI-42SD
2 3 /
8
"
(60)
MODELS BI-48S, BI-48SID AND BI-48SD
Built-In Refrigeration 10
Built-In Models
STANDARD INSTALLATION
24"
(610)
OPENING
DEPTH
TOP VIEW
IMPORTANT NOTE: If an 83" (2108) grille height is specified, the opening height must be decreased by 7 / 8 " (22) . If an 88"
(2235) grille height is specified, the opening height increases by 4" (102) .
If two units are installed side by side, refer to pages 30–31 for dual standard installations.
24"
(610)
OPENING DEPTH
83 3 / 4 "
(2127)
OPENING
HEIGHT
A
OPENING WIDTH
SIDE VIEW
Opening Width
BI-36R, BI-36RG and BI-36F
BI-30U and BI-30UG
BI-36U, BI-36UG and BI-36UFD
BI-36S
BI-42S, BI-42SID and BI-42SD
BI-48S, BI-48SID and BI-48SD
FRONT VIEW
A
35 1 /
2
" (902)
29 1 / 2 " (746)
35 1 / 2 " (902)
35 1 / 2 " (902)
41 1 /
2
" (1054)
47 1 /
2
" (1206)
Built-In Refrigeration 11 subzero.com/specs
Planning Information
ELECTRICAL REQUIREMENTS
For all built-in models, the electrical supply should be located within the shaded area shown in the illustration.
Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit servicing only this appliance is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
115 V AC, 60 Hz
15 amp
3-prong grounding-type
FRONT VIEW
7"
(178)
E
6"
(152)
75 1 / 2 "
(1918)
FROM
FLOOR
Location of electrical supply.
PLUMBING REQUIREMENTS
All built-in models with an automatic ice maker feature a water filtration system. The water supply line should be located within the shaded area shown in the illustrations.
The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves.
A saddle valve kit is available through your authorized
Sub-Zero dealer. The water line must not interfere with installation of the anti-tip brackets.
IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 35 psi
(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times.
In this application, the water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the built-in installation guide packed with the unit for detailed instructions. A copper line is not recommended for this application.
Plumbing Requirements
Water Supply Line 1 / 4 " OD copper, braided stainless steel or PEX tubing
Water Pressure
Excess Water Line for Connection
35–120 psi (2.4–8.3 bar)
36" (914)
BACK WALL
1
/ 2 "
(13)
18" (457) 6"
(152)
18" (457)
FLOOR
FRONT VIEW
6"
(152)
3" (76)
TOP VIEW
Location of water supply— rear.
Location of water supply— bottom.
Built-In Refrigeration 12
Framed Application
IMPORTANT NOTE: The framed application is not a separate model. This is an overlay unit in a framed application.
The framed panel design option is available for all built-in overlay models. You must specify panels, full-length handles and a framed grille insert to achieve the traditional framed look. For exact door panel dimensions refer to framed panel specifications on the following pages. Also refer to the full-scale templates at the end of this section for additional panel and handle considerations.
Optional extended full-length handles that provide additional finger clearance for raised panels are available through your authorized Sub-Zero dealer.
Custom cabinetry panels slide into the door to blend into the kitchen design. Shown with full-length handle and louvered grille option for the traditional Sub-Zero look.
Framed Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Framed Panels
MIN PANEL THICKNESS
All Framed Panels
75 lbs
50 lbs
(34 kg)
(23 kg)
1 /
4
" (6)
Built-In Refrigeration 13 subzero.com/specs
Framed Panels
If the thickness of the custom panels is less than 1 /
4
" (6) , they must be backed up with a sheet of shim material to build the total thickness to 1 /
4
" (6) . If the panel is thicker than 1 /
4
" (6) , a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustrations.
IMPORTANT NOTE: For framed design applications, routing, recessing or optional extended handles may be required on raised panels for finger clearance under the handle. Refer to the full-scale templates at the end of this section.
IMPORTANT NOTE: Do not cover a glass door with a solid panel. Also, the edges of the window cut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.
TRIM
1
REVEAL
/
4
"
(6) min
1 / 4 " (6)
PANEL
MAIN FRAME
DOOR
TRIM
1
REVEAL
/
4
"
(6) min
ROUT TO
1 / 4 " (6)
MAIN FRAME
DOOR
Panels 1 / 4 " (6) thick or less.
Panels thicker than 1 / 4 " (6) .
Built-In Refrigeration 14
Framed Panels
W
BI-36R / BI-36F
H A
A
B
W
BI-36RG
A H H
W
BI-30U / BI-36U
H
A
A A H H
W W
A
H
W
BI-30UG / BI-36UG
W
BI-36UFD
H
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR/FREEZER
Door Panel
BI-36RG
Window Cut-Out
Cut-Out Location
W H
35 3 /
4
" (908) 69 9 /
16
" (1767)
W H
25 1 / 2 " (648) 54 1 / 16 " (1373)
A
5 3 /
16
" (132)
B
10 5 /
16
" (262)
Models BI-30U and BI-30UG
REFRIGERATOR
Door Panel
FREEZER
Drawer Panel
BI-30UG
Window Cut-Out
Cut-Out Location
W H
29 3 /
4
" (756) 49 15 /
16
" (1268)
W H
29 3 / 4 " (756) 18 11 / 16 " (475)
W H
19 1 / 2 " (495) 39 11 / 16 " (1008)
A
5 3 /
16
" (132)
Models BI-36U and BI-36UG
REFRIGERATOR
Door Panel
FREEZER
Drawer Panel
BI-36UG
Window Cut-Out
Cut-Out Location
W H
35 3 /
4
" (908) 49 15 /
16
" (1268)
W H
35 3 / 4 " (908) 18 11 / 16 " (475)
W H
25 1 / 2 " (648) 39 11 / 16 " (1008)
A
5 3 /
16
" (132)
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Door Panels
FREEZER
Drawer Panel
W H
17 5 /
8
" (448) 49 15 /
16
" (1268)
W H
35 3 / 4 " (908) 18 11 / 16 " (475)
Built-In Refrigeration 15 subzero.com/specs
Framed Panels
H
A
B
W W W W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
BI-42SD / BI-48SD
H
Model BI-36S
REFRIGERATOR
Door Panel
FREEZER
Door Panel
W H
19 13 /
16
" (503) 69 9 /
16
" (1767)
W H
15 7 / 16 " (392) 69 9 / 16 " (1767)
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Door Panel
FREEZER
Door Panel
BI-42SD
Dispenser Cut-Out
Cut-Out Location
W H
24 13 / 16 " (630) 69 9 / 16 " (1767)
W H
16 7 /
16
" (418) 69 9 /
16
" (1767)
W
5 7 /
8
" (149)
A
1 7 / 8 " (48)
H
12 7 /
16
" (316)
B
28 3 / 4 " (730)
Models BI-48S, BI-48SID and BI-48SD
REFRIGERATOR
Door Panel
FREEZER
Door Panel
BI-48SD
Dispenser Cut-Out
Cut-Out Location
W H
28 1 /
2
" (724) 69 9 /
16
" (1767)
W H
18 3 / 4 " (476) 69 9 / 16 " (1767)
W
5 7 / 8 " (149)
A
1 7 /
8
" (48)
H
12 7 / 16 " (316)
B
28 3 /
4
" (730)
For models BI-42SD and BI-48SD, panel thickness in the dispenser area can range from 1 /
4
" (6) to a maximum of
1 1 /
8
" (29) . If the panel is thicker, you must rout out a minimum
1 /
4
" (6) flat landing area to accommodate the glasswell bezel.
Built-In Refrigeration
Framed Application
OPTIONAL GRILLE PANEL
A panel grille, providing an 84" (2134) finished height, is standard on overlay models. Optional panel grilles are available for 83" (2108) and 88" (2235) finished heights.
Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88"
(2235) finished height, add 4" (102) to height dimensions.
Optional Grille Panel
30" (762) Models
36" (914) Models
42" (1067) Models
48" (1219) Models
Grille Panel Requirements
MAX WEIGHT
Grille Panel
MIN PANEL THICKNESS
Grille Panel
W
29 3 /
4
" (756)
35 3 /
4
" (908)
41 3 /
4
" (1060)
47 3 /
4
" (1213)
H
8 15 /
16
" (227)
8 15 /
16
" (227)
8 15 /
16
" (227)
8 15 /
16
" (227)
13 lbs
1
(6 kg)
/
4
" (6)
Optional grille panel.
16
Built-In Refrigeration 17 subzero.com/specs
Framed Application
PARTIAL FRAMED OPTION
If you choose not to use custom panels above and below the glasswell for dispenser model BI-42SD or BI-48SD, a stainless steel insert panel is available as a sales accessory. This accessory kit includes partial framed molding and stainless steel panel to provide a spill-resistant finish above and below the glasswell on the refrigerator door only. The partial framed accessory kit is available through your authorized Sub-Zero dealer. Refer to panel dimensions for the partial framed option below.
Optional Partial Framed Panels
BI-42SD
Refrigerator Panel
Freezer Panel
BI-48SD
Refrigerator Panel
Freezer Panel
W H
15 1 /
16
" (383) 69 9 /
16
" (1767)
16 7 / 16 " (418) 69 9 / 16 " (1767)
W H
18 3 /
4
" (476) 69 9 /
16
" (1767)
18 3 /
4
" (476) 69 9 /
16
" (1767)
Partial framed kit.
H
W W
BI-42SD / BI-48SD
Partial framed option.
Built-In Refrigeration 18
Custom cabinet overlay panels can be combined with unique hardware for design flexibility. Shown with pro handle option to complement Wolf ranges and rangetops.
Overlay Panels
If you and your client have ordered an overlay model, you will be adding panels and handles to give the unit a more custom look. The overlay panel design option is available for all built-in overlay models. For exact door panel dimensions, refer to overlay panel specifications on the following pages.
IMPORTANT NOTE: Overlay models can be used in an overlay or a flush inset application. Be aware that the application specified will affect panel sizes, rough opening dimensions and installation.
The overlay design allows decorative panels to cover the door trim for a more seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative overlay panel, which is typically 3 /
4
" (19) , a .10" (3) spacer panel and a 1 /
4
" (6) backer panel. Depending on your cabinet manufacturer, this could also be one panel routed for different dimensions.
Regardless of the physical construction of the panels
(three-panel assembly or routed panel), you will need to follow the overlay panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.
Overlay Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Overlay Models
Grille Panel
MIN PANEL THICKNESS
All Overlay Panels
75 lbs (34 kg)
50 lbs (23 kg)
13 lbs (6 kg)
5 /
8
" (16)
Built-In Refrigeration 19 subzero.com/specs
Overlay Panels
The illustrations provide a cross section view of the threepanel assembly, showing placement of the trim and a rear view of the three-panel assembly with critical dimensions, standard for all built-in models.
Overlay grille panels for the panel grille match the design of the overlay door panels. Dimensions for the grille panel are listed in the overlay panel specifications on the following pages.
IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: When installing two units in a side-byside application, refer to pages 30–31 for dual standard installations. Be aware that rough opening dimensions are different for this application.
SPACER PANEL
OVERLAY
PANEL
SPACER
PANEL
OVERLAY PANEL
BACKER PANEL
TRIM
BACKER
PANEL
1 /
8
"
(3)
5 /
16
"
(8) min
3
/ 4 "
(19) typical
.10"
(3)
1 /
4
"
(6)
Panel assembly cross section. Panel assembly rear view.
Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
Built-In Refrigeration 20
Overlay Panels
H H H H H
A A
W
BI-36R / BI-36F
H A
B
W
BI-36RG
A H H
W
BI-30U / BI-36U
H
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-36RG
Window Cut-Out
Cut-Out Location
W
36" (914) 69 3 /
4
"
H
(1772)
35 1 / 8 " (892) 68 15 / 16 " (1751)
35 3 / 4 " (908) 69 9 / 16 " (1767)
W
36" (914)
35 1 /
8
" (892)
35 3 / 4 " (908)
H
9 1 /
4
" (235) *
8 5 /
16
" (211)
8 15 / 16 " (227)
W
25 1 / 2 " (648)
A
5 1 /
4
" (133)
H
54 1 / 8 " (1375)
B
10 3 /
8
" (264)
Models BI-30U and BI-30UG
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-30UG
Window Cut-Out
Cut-Out Location
W
30" (762) 50 1 /
8
"
H
(1273)
29 1 /
8
" (740) 49 5 /
16
" (1253)
29 3 / 4 " (756) 49 15 / 16 " (1268)
W H
30" (762)
29 1 /
8
" (740) 18
19" (483)
1 /
16
" (459)
29 3 /
4
" (756) 18 11 /
16
" (475)
W
30" (762)
29 1 / 8 " (740)
29 3 /
4
" (756)
W
19 1 /
2
" (495)
H
9 1 /
4
" (235) *
8 5 / 16 " (211)
8 15 /
16
" (227)
H
39 5 /
8
" (1006)
A
5 1 / 4 " (133)
A A H
W W
A
H
W
BI-30UG / BI-36UG
W
BI-36UFD
H
H
Models BI-36U and BI-36UG
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-36UG
Window Cut-Out
Cut-Out Location
W
36" (914) 50 1 /
8
"
H
(1273)
35 1 / 8 " (892) 49 5 / 16 " (1253)
35 3 / 4 " (908) 49 15 / 16 " (1268)
W H
36" (914)
35 1 /
8
" (892) 18
19" (483)
1 /
16
" (459)
35 3 / 4 " (908) 18 11 / 16 " (475)
W
36" (914)
35 1 /
8
" (892)
35 3 /
4
" (908)
H
9 1 / 4 " (235) *
8 5 /
16
" (211)
8 15 /
16
" (227)
W
25 1 /
2
" (648)
H
39 5 /
8
" (1006)
A
5 1 / 4 " (133)
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Overlay Panels
Spacer Panels
Backer Panels
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W H
17 7 / 8 " (454) 50 1 / 8 " (1273)
17" (432) 49 5 /
16
" (1253)
17 5 /
8
" (448) 49 15 /
16
" (1268)
W H
36" (914)
35 1 / 8 " (892) 18
19" (483)
1 / 16 " (459)
35 3 / 4 " (908) 18 11 / 16 " (475)
W
36" (914)
35 1 /
8
" (892)
35 3 / 4 " (908)
H
9 1 /
4
" (235) *
8 5 /
16
" (211)
8 15 / 16 " (227)
Built-In Refrigeration 21 subzero.com/specs
Overlay Panels
H H
H H
A
B
W W W W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
BI-42SD / BI-48SD
Model BI-36S
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
W
20 1 /
16
" (510)
19 3 / 16 " (487) 68 15 / 16 " (1751)
19 13 / 16 " (503) 69 9 / 16 " (1767)
W
15 11 /
16
" (398)
14 13 /
16
" (376) 68 15 /
16
" (1751)
15 7 / 16 " (392) 69 9 / 16 " (1767)
W
36" (914)
35 1 /
8
" (892)
35 3 /
4
" (908)
H
69 3 /
4
" (1772)
H
69 3 /
4
" (1772)
H
9 1 / 4 " (235) *
8 5 /
16
" (211)
8 15 /
16
" (227)
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
W H
25 1 / 16 " (637) 69 3 / 4 " (1772)
24 3 / 16 " (614) 68 15 / 16 " (1751)
24 13 /
16
" (630) 69 9 /
16
" (1767)
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-42SD
Dispenser Cut-Out
Cut-Out Location
W
16 11 /
16
" (424)
H
69 3 /
4
" (1772)
15 13 / 16 " (402) 68 15 / 16 " (1751)
16 7 / 16 " (418) 69 9 / 16 " (1767)
W
42" (1067)
41 1 /
8
" (1045)
41 3 /
4
" (1060)
H
9 1 /
4
" (235) *
8 5 /
16
" (211)
8 15 /
16
" (227)
W
5 7 / 8 " (149)
H
12 7 / 16 " (316)
A B
2" (51) 28 13 /
16
" (732)
Models BI-48S, BI-48SID and BI-48SD
REFRIGERATOR
Overlay Panel
Spacer Panel
Backer Panel
FREEZER
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
BI-48SD
Dispenser Cut-Out
Cut-Out Location
W
28 3 /
4
" (730)
H
69 3 /
4
" (1772)
27 7 / 8 " (708) 68 15 / 16 " (1751)
28 1 / 2 " (724) 69 9 / 16 " (1767)
W
19" (483) 69 3 /
4
"
H
(1772)
18 1 /
8
" (460) 68 15 /
16
" (1751)
18 3 / 4 " (476) 69 9 / 16 " (1767)
W
48" (1219)
47 1 /
8
" (1197)
47 3 /
4
" (1213)
H
9 1 / 4 " (235) *
8 5 /
16
" (211)
8 15 /
16
" (227)
W
5 7 /
8
" (149)
H
12 7 /
16
" (316)
A B
2" (51) 28 13 / 16 " (732)
*Panel height may be increased by 7 / 16 " (11) to hide upper main frame. For more information, refer to the built-in panel configurator at subzero.com/trade/panels.
Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83"
(2108) or 88" (2235) panel grille must be ordered to accept an
83" (2108) or 88" (2235) custom panel.
Built-In Refrigeration 22
Flush Inset Application
It is necessary to consider the following points when planning for a flush inset application:
• The flush inset depth is 2 3 /
16
" (56) deeper than the standard opening.
• The flush inset width is 2 1 /
2
" (64) wider than the standard opening.
• The flush inset height is 1 /
4
" (6) higher than the standard opening.
• Panel widths increase to achieve the flush inset look.
• You must allow a 1 /
2
" (13) reveal around the perimeter of the unit and grille to allow for proper door clearance and airflow.
IMPORTANT NOTE: The flush inset application is not a separate model. This is an overlay unit in a flush installation. The same model is used in an overlay or flush inset application.
Rough opening dimensions for the flush inset application assume the use of a 3 /
4
" (19) decorative panel. The illustrations below show the difference between standard and flush inset installations.
This design option allows for a flush door and grille. Stainless steel panels are available as sales accessories. Shown with tubular handle option to mirror Wolf built-in ovens.
STANDARD INSTALLATION
24" (610)
OPENING
DEPTH
TOP VIEW
Standard installation.
FLUSH INSET INSTALLATION
WITH 3 /
4
" (19) PANEL
24" (610)
OPENING
DEPTH
26 3 / 16 "
(665)
FLUSH
INSET
DEPTH
2 3 / 16 "
(56)
TOP VIEW
Flush inset installation.
1 1 / 4 "
(32)
Built-In Refrigeration 23 subzero.com/specs
Built-In Models
FLUSH INSET INSTALLATION
TOP VIEW
CLEAT
24" (610)
DEPTH TO CLEAT
26 3 /
16
"
(665)
FLUSH INSET DEPTH
2 3 /
16
"
(56)
1
/ 4 "
(6)
26
3
/ 16 "
(665)
24" (610)
DEPTH
TO CLEAT FLUSH
INSET
DEPTH
1 1 /
4
"
(32) UNIT WITH
3 /
4
"
(19) PANEL
CLEAT
DETAIL A
2 3 /
16
"
(56)
83 3 /
4
"
(2127)
HEIGHT
TO CLEAT
84"
(2134)
FLUSH
INSET
HEIGHT
1
1
/ 4 "
(32)
A
WIDTH TO CLEAT
B
FLUSH INSET WIDTH
26 3 /
16
"
(665)
FLUSH
INSET
DEPTH
24"
(610)
OPENING
DEPTH
TO CLEAT
TOP VIEW
CLEAT
3"
(76) typical
2 3 / 16 " (56)
1
1
/ 4 "
(32)
Detail A
1
1
/ 4 "
(32)
CLEAT
4"
(102)
3" typical
(76)
24" (610)
OPENING
DEPTH TO
CLEAT
1 1 / 4 "
(32)
Detail B
2 3 / 16 " (56)
SHADED
AREA
MUST BE
FINISHED
DETAIL B
SIDE VIEW FRONT VIEW
Flush Inset Opening Widths
BI-36R, BI-36RG and BI-36F
BI-30U and BI-30UG
BI-36U, BI-36UG and BI-36UFD
BI-36S
BI-42S, BI-42SID and BI-42SD
BI-48S, BI-48SID and BI-48SD
A
35 1 /
2
" (902)
29 1 /
2
" (746)
35 1 /
2
" (902)
35 1 / 2 " (902)
41 1 / 2 " (1054)
47 1 /
2
" (1206)
B
38" (965)
32" (813)
38" (965)
38" (965)
44" (1118)
50" (1270)
Dimensions assume a 3 /
4
" (19) panel thickness.
IMPORTANT NOTE: If an 83" (2108) grille height is specified, the height to cleat and flush inset height must be decreased by 7 /
8
" (22) . If an 88" (2235) grille height is specified, the height to cleat and flush inset height increases by 4" (102) .
If two units are installed side by side, refer to pages 32–36 for dual flush inset installations.
Built-In Refrigeration 24
Flush Inset Panels
The flush inset application allows decorative panels on the front of the unit to be flush with surrounding cabinetry and is available for all built-in overlay models. For exact panel dimensions, refer to flush inset panel specifications on the following pages.
The flush inset design allows decorative panels to cover the door trim for a seamless appearance that blends with the design of the room. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically 3 /
4
" (19) , a .10" (3) spacer panel and a 1 /
4
" (6) backer panel. Depending on your cabinet manufacturer, this could also be one panel routed for different dimensions.
Regardless of the physical construction of the panels
(three-panel assembly or routed panel), you will need to follow the flush inset panel specifications on the following pages for exact sizing and panel placement to ensure a proper fit.
The illustration below provides a rear view of the threepanel assembly with critical dimensions, standard for all built-in models.
IMPORTANT NOTE: The inside edges of the rough opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open.
IMPORTANT NOTE: On glass door models, the edges of the overlay, spacer and backer panels of the window cut-out will need to be finished, as they will be exposed.
IMPORTANT NOTE: For flush inset panels thicker than
3 /
4
" (19) , a 90° door stop may be required to prevent interference with adjacent cabinets. Refer to the full-scale templates at the end of this section.
IMPORTANT NOTE: When installing two units side by side in a flush inset application, refer to pages 32–36 for dual flush inset installations. Be aware that rough opening dimensions, panel sizes and offsets are different for this application.
Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
FLUSH INSET
PANEL
SPACER
PANEL
Flush Inset Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Flush Inset Models
Grille Panel
MIN PANEL THICKNESS
All Flush Inset Panels
75 lbs (34 kg)
50 lbs (23 kg)
13 lbs (6 kg)
5 /
8
" (16)
BACKER
PANEL
3 / 4 "
(19) typical
.10"
(3)
1 /
4
"
(6)
Three-panel assembly.
Built-In Refrigeration 25 subzero.com/specs
Flush Inset Panels
PANEL OFFSETS
Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model.
For additional information on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com.
TOP VIEW
DOOR / DRAWER / GRILLE
DOOR
BACKER
SPACER
CABINETRY
FLUSH INSET PANEL
5 /
16
"
(8)
5 /
8
"
(16)
1 /
2
"
(13)
Illus. A
5 / 16 " (8)
1 /
8
"
(3)
Illus. B
Panel Offsets
ALL REFRIGERATOR / ALL FREEZER
Door / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
OVER-AND-UNDER
Door / Drawer / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom / Drawer Top
Drawer Bottom
SIDE-BY-SIDE
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
Illus.
A
C
D
E
F
A
C
D
F
A
B
C
D
F
TOP VIEW
DOOR
1 /
4
"
(6)
REVEAL
CABINETRY
GRILLE
1 /
2
"
(13)
5 /
16
"
1 / 8 "
(3)
(8)
Illus. C
DOOR
DRAWER
SIDE VIEW
GRILLE
DOOR
5
/ 16 "
(8)
5 /
32
"
(4)
1 /
2
"
(13)
5
/ 16 "
3 /
32
"
(2)
(8)
SIDE VIEW
5 /
16
"
(8) 3 /
32
"
(2)
5 /
8
"
(16)
5 / 16 "
5 /
32
"
(4)
(8)
SIDE VIEW
Illus. D
DOOR /
DRAWER
5
/ 16 "
(8)
SIDE VIEW
3 / 32 "
(2)
Illus. E Illus. F
Built-In Refrigeration 26
Flush Inset Panels
H H H H H
A B
W
BI-36R / BI-36F
H A
B
W
BI-36RG
A H H
W
BI-30U / BI-36U
H
Models BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36RG
Window Cut-Out
Cut-Out Location
W
37" (940) 69 3 /
4
"
H
(1772)
35 1 / 8 " (892) 68 15 / 16 " (1751)
35 3 / 4 " (908) 69 9 / 16 " (1767)
W
37" (940)
35 1 /
8
" (892)
35 3 / 4 " (908)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
W
25 1 / 2 " (648)
A
5 3 /
4
" (146)
H
54 1 / 8 " (1375)
B
10 3 /
8
" (264)
Models BI-30U and BI-30UG
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-30UG
Window Cut-Out
Cut-Out Location
W
31" (787) 50 1 /
8
"
H
(1273)
29 1 /
8
" (740) 49 5 /
16
" (1253)
29 3 / 4 " (756) 49 15 / 16 " (1268)
W H
31" (787)
29 1 /
8
" (740) 18
19" (483)
1 /
16
" (459)
29 3 /
4
" (756) 18 11 /
16
" (475)
W
31" (787)
29 1 / 8 " (740)
29 3 /
4
" (756)
W
19 1 /
2
" (495)
A
5 3 / 4 " (146)
H
9 1 /
4
" (235)
8 5 / 16 " (211)
8 15 /
16
" (227)
H
39 5 /
8
" (1006)
B
5 1 / 4 " (133)
A A H
W W
B
H
W
BI-30UG / BI-36UG
W
BI-36UFD
H
H
Models BI-36U and BI-36UG
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36UG
Window Cut-Out
Cut-Out Location
W
37" (940) 50 1 /
8
"
H
(1273)
35 1 / 8 " (892) 49 5 / 16 " (1253)
35 3 / 4 " (908) 49 15 / 16 " (1268)
W H
37" (940)
35 1 /
8
" (892) 18
19" (483)
1 /
16
" (459)
35 3 / 4 " (908) 18 11 / 16 " (475)
W
37" (940)
35 1 /
8
" (892)
35 3 /
4
" (908)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
W
25 1 /
2
" (648)
A
5 3 / 4 " (146)
H
39 5 /
8
" (1006)
B
5 1 / 4 " (133)
Model BI-36UFD
REFRIGERATOR (2 PANELS)
Flush Inset Panels
Spacer Panels
Backer Panels
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W H
18 3 / 8 " (467) 50 1 / 8 " (1273)
17" (432) 49 5 /
16
" (1253)
17 5 /
8
" (448) 49 15 /
16
" (1268)
W H
37" (940)
35 1 / 8 " (892) 18
19" (483)
1 / 16 " (459)
35 3 / 4 " (908) 18 11 / 16 " (475)
W
37" (940)
35 1 /
8
" (892)
35 3 / 4 " (908)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
Built-In Refrigeration 27 subzero.com/specs
Flush Inset Panels
H H
H H
A
B
W W W W
BI-36S / BI-42S / BI-42SID
BI-48S / BI-48SID
BI-42SD / BI-48SD
Model BI-36S
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
W
20 9 /
16
" (522)
19 3 / 16 " (487) 68 15 / 16 " (1751)
19 13 / 16 " (503) 69 9 / 16 " (1767)
W
16 3 /
16
" (411)
14 13 /
16
" (376) 68 15 /
16
" (1751)
15 7 / 16 " (392) 69 9 / 16 " (1767)
W
37" (940)
35 1 /
8
" (892)
35 3 /
4
" (908)
H
69 3 /
4
" (1772)
H
69 3 /
4
" (1772)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
Models BI-42S, BI-42SID and BI-42SD
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
W
25 9 /
16
" (649)
H
69 3 /
4
" (1772)
24 3 /
16
" (614) 68 15 /
16
" (1751)
24 13 /
16
" (630) 69 9 /
16
" (1767)
W H
17 3 / 16 " (437) 69 3 / 4 " (1772)
15 13 / 16 " (402) 68 15 / 16 " (1751)
16 7 /
16
" (418) 69 9 /
16
" (1767)
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
DISPENSER (BI-42SD)
Dispenser Cut-Out
Cut-Out Location
W
43" (1092)
41 1 / 8 " (1045)
41 3 / 4 " (1060)
H
9 1 /
4
" (235)
8 5 / 16 " (211)
8 15 / 16 " (227)
W
5 7 /
8
" (149)
H
12 7 /
16
" (316)
A B
2" (51) 28 13 /
16
" (732)
Models BI-48S, BI-48SID and BI-48SD
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
DISPENSER (BI-48SD)
Cut-Out
Cut-Out Location
W
29 1 /
4
" (743)
H
69 3 /
4
" (1772)
27 7 / 8 " (708) 68 15 / 16 " (1751)
28 1 / 2 " (724) 69 9 / 16 " (1767)
W
19 1 /
2
" (495)
H
69 3 /
4
" (1772)
18 1 /
8
" (460) 68 15 /
16
" (1751)
18 3 / 4 " (476) 69 9 / 16 " (1767)
W
49" (1245)
47 1 /
8
" (1197)
47 3 /
4
" (1213)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
W
5 7 /
8
" (149)
H
12 7 /
16
" (316)
A B
2" (51) 28 13 / 16 " (732)
Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions. An 83"
(2108) or 88" (2235) panel grille must be ordered to accept an
83" (2108) or 88" (2235) custom panel.
Built-In Refrigeration 28
Ice and Water Dispenser
MODELS BI-42SD AND BI-48SD
For models BI-42SD or BI-48SD, the refrigerator door panel must include a cut-out to accommodate the dispenser glasswell and bezel. The thickness of the panel in this area can range from 1 /
4
" (6) to a maximum of 1 1 /
8
" (29) .
IMPORTANT NOTE: Regardless of the thickness of the panel for model BI-42SD or BI-48SD, you must plan for a flat landing area for the decorative bezel surrounding the glasswell area. The illustration to the right provides exact bezel dimensions. Refer to the appropriate panel specifications page for exact cut-out location. This landing area can be accomplished in a number of different ways. These photos show two options.
One option (flush) is to rout the panel so the bezel will be flush with rails and stiles. You must rout a space to accommodate the height and width of the bezel. The width of the stile immediately to the left of the bezel must be 1 3 /
4
" (44) . Do not cut the entire stile to this dimension.
The other option (proud) shows a boxed out landing area for the bezel using stiles and rails to create this space. In this application, the bezel will sit proud of the stiles and rails. The total thickness of the panels at this level must not exceed 1 1 /
8
" (29) .
For overlay and flush inset models, mounting placement of the refrigerator door handle must assure proper access to the glasswell and adequate clearance under the handle.
The handle placement illustration shows the relation of the refrigerator door handle to the glasswell bezel on stainless steel models.
5 / 8 "
(16)
3 / 32 "
(2)
12 7 / 8 "
(327)
6 5 / 16 " (160)
1 /
8
"
(3)
RADIUS
1"
(25)
2"
(51)
Handle placement.
GLASSWELL
HANDLE
Dispenser dimensions.
Flush option.
Proud option.
Built-In Refrigeration 29 subzero.com/specs
Side Panels
Side panels can be used with every design application.
When planning for side panels with the installation of a built-in model, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using with your unit, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may change the width of your rough opening.
The side panel will need to be a minimum of 24" (610) deep and 1 /
2
" (13) thick. Refer to the illustrations below for side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit.
IMPORTANT NOTE: If you have a model BI-30U, BI-30UG,
BI-36U, BI-36UG or BI-36UFD, extra routing will be necessary to prevent the panel from hitting the refrigerator lower hinge plate.
When installing a built-in unit with a custom side panel, an accessory kit is required. Stainless steel and white enamel side panels are also available through your authorized
Sub-Zero dealer.
24"
(610)
FRONT
OF SIDE
PANEL
1" (25)
1
7
/ 8 " (48)
ROUT TO
1 / 8 " (3)
1 7 / 8 " (48)
1"
(25)
1 /
8
"
(3)
1
/ 2 " (13)
MAIN
FRAME
SIDE PANEL
ROUTING 84"
(2134)
4
1
/ 4 " (108)
ROUT TO
3 /
16
"
(5)
(OVER-AND-UNDER
MODELS)
5 3 /
4
"
(146)
20 1 / 2 "
(521)
4" (102)
OPTIONAL
TOE KICK
CUT-OUT
Side panel dimensions.
2 5 /
8
"
(67)
Routing detail.
Built-In Refrigeration 30
Dual installation—standard application.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Models
Dual Wide Grille Panel
MIN PANEL THICKNESS
Framed Panels
Overlay and Flush Inset Panels
75 lbs (34 kg)
50 lbs (23 kg)
26 lbs (12 kg)
1 / 4 " (6)
5 /
8
" (16)
Dual Installation
STANDARD APPLICATION
Two overlay or stainless steel units may be placed side by side in a dual installation. Some standard applications will require a dual installation kit, available through your authorized Sub-Zero dealer. If you are installing two units side by side in a flush inset application, refer to page 32.
A custom filler strip can be used between two units in a framed, overlay or stainless steel design application. It is recommended that the filler strip be at least 2" (51) wide to prevent condensation between the units. Be sure to add the filler strip width to your rough opening width. Refer to the full-scale template on page 42.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustration A, a dual installation accessory kit is required. Refer to page 36 for information on dual installation kits.
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. A Illus. B Illus. C
Built-In Refrigeration
Dual Installation
STANDARD INSTALLATION
24"
(610)
OPENING
DEPTH
TOP VIEW
31 subzero.com/specs
24"
(610)
OPENING DEPTH
83
3
/ 4 "
(2127)
OPENING
HEIGHT
A
OPENING WIDTH
SIDE VIEW
Opening Widths
Two 30" (762) Models
30" (762) and 36" (914) Models
Two 36" (914) Models
FRONT VIEW
A
59 3 /
4
" (1518)
65 3 / 4 " (1670)
71 3 / 4 " (1822)
IMPORTANT NOTE: A dual installation kit will be required for this installation.
Built-In Refrigeration 32
Dual installation—flush inset application.
Dual Installation Panel Requirements
MAX WEIGHT PER PANEL
BI-36R, BI-36RG and BI-36F
All Other Models
Dual Wide Grille Panel
MIN PANEL THICKNESS
Flush Inset Panels
75 lbs (34 kg)
50 lbs (23 kg)
26 lbs (12 kg)
5 / 8 " (16)
Dual Installation
FLUSH INSET APPLICATION
Installing two built-in models side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets.
It will also require a dual installation kit, available through your authorized Sub-Zero dealer.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip. Refer to the full-scale template on page 43. Illustration A is the only application that will accommodate the dual wide grille.
IMPORTANT NOTE: The application shown in illustration A can only be achieved by installing dual flush inset panels.
Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.
Dual flush inset panels and dual installation kits are available through your authorized Sub-Zero dealer. Refer to pages 34–35 for dual flush inset panel specifications and page 36 for information on dual installation kits.
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
Illus. A Illus. B Illus. C
Built-In Refrigeration 33 subzero.com/specs
Dual Installation
FLUSH INSET INSTALLATION
26 3 / 16 "
(665)
FLUSH
24" (610)
DEPTH
TO CLEAT
INSET
DEPTH
1 1 / 4 "
(32)
TOP VIEW
CLEAT
24"
(610)
DEPTH TO CLEAT
26 3 /
16
"
(665)
FLUSH INSET DEPTH
2 3 / 16 "
(56)
1 /
4
"
(6)
2 3 / 16 "
(56)
83
3
/ 4 "
(2127)
HEIGHT
TO CLEAT
84"
(2134)
FLUSH
INSET
HEIGHT
1 1 / 4 "
(32)
TWO UNITS WITH
3 / 4 " (19) PANEL
CLEAT
DETAIL A
26 3 /
16
"
(665)
FLUSH
INSET
DEPTH
24"
(610)
OPENING
DEPTH
TO CLEAT
TOP VIEW
CLEAT
3"
(76) typical
2 3 / 16 " (56)
1
1
/ 4 "
(32)
Detail A
A
WIDTH TO CLEAT
B
FLUSH INSET WIDTH
CLEAT
4"
(102)
3" typical
(76)
1 1 / 4 "
(32)
24" (610)
OPENING
DEPTH TO
CLEAT
1 1 / 4 "
(32)
2 3 / 16 " (56)
SHADED
AREA
MUST BE
FINISHED
Detail B
DETAIL B
SIDE VIEW FRONT VIEW
Opening Widths
Two 30" (762) Models
30" (762) and 36" (914) Models
Two 36" (914) Models
A B
59 3 /
4
" (1518) 62 1 /
4
" (1581)
65 3 / 4 " (1670) 68 1 / 4 " (1734)
71 3 / 4 " (1822) 74 1 / 4 " (1886)
IMPORTANT NOTE: A dual installation kit will be required for this installation.
Dimensions assume a 3 /
4
" (19) panel thickness.
Built-In Refrigeration 34
Dual Installation
FLUSH INSET PANEL OFFSETS
When installing two built-in models side by side in a flush inset application, you must decrease the width of the decorative flush inset panels by 1 /
2
" (13) . Adjustments to the panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.
IMPORTANT NOTE: If a filler strip is not used, dual installations can only be accomplished using two units with opposite hinges.
Illustrations A–F provide panel offsets and reveals for all built-in models in a flush inset application. Refer to the chart below for reference to the illustrations relating to your specific model. All reveals are 1 /
2
" (13) unless otherwise specified.
For additional information on model-specific panel reveals, visit the specification library section of our website, subzerotrade.com.
Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
Panel Offsets
ALL REFRIGERATOR / ALL FREEZER
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
OVER-AND-UNDER
Doors (hinge) / Drawer / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom / Drawer Top
Drawer Bottom
Illus.
C
D
A
B
E
F
C
D
A
B
F
TOP VIEW
DOOR / DRAWER / GRILLE
BACKER
SPACER
CABINETRY
FLUSH INSET PANEL
5 /
16
"
(8)
5 /
8
"
(16)
1 /
2
"
(13)
Illus. A
DOOR
5 /
16
"
(8)
1 /
8
"
(3)
Illus. B
TOP VIEW
DUAL
TRIM
1
/ 4 " (6)
REVEAL
DOOR
CABINETRY
GRILLE
1 /
2
"
(13)
5 /
16
"
1 / 8 "
(3)
(8)
Illus. C
DOOR
DRAWER
SIDE VIEW
GRILLE
DOOR
5
/ 16 "
(8)
5 /
32
"
(4)
1 /
2
"
(13)
5
/ 16 "
3 /
32
"
(2)
(8)
SIDE VIEW
5 /
16
"
(8) 3 /
32
"
(2)
5 /
8
"
(16)
5 / 16 "
5 /
32
"
(4)
(8)
SIDE VIEW
Illus. D
DOOR /
DRAWER
5
/ 16 "
(8)
SIDE VIEW
3 / 32 "
(2)
Illus. E Illus. F
Built-In Refrigeration 35 subzero.com/specs
Dual Installation—Flush Inset Panels
H H
A
H H
B
H A A H H A A H
W
BI-36R / BI-36F
B
W
BI-36RG
BI-36R, BI-36RG and BI-36F
REFRIGERATOR / FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36RG
Window Cut-Out
Cut-Out Location
W
36 1 /
2
" (927)
H
69 3 /
4
" (1772)
35 1 / 8 " (892) 68 15 / 16 " (1751)
35 3 / 4 " (908) 69 9 / 16 " (1767)
W
36 1 /
2
" (927)
35 1 /
8
" (892)
35 3 / 4 " (908)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
W
25" (635)
A
5 3 /
4
" (146)
H
54 1 / 8 " (1375)
B
10 3 /
8
" (264)
BI-30U and BI-30UG
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-30UG
Window Cut-Out
Cut-Out Location
W H
30 1 / 2 " (775) 50 1 / 8 " (1273)
29 1 /
8
" (740) 49 5 /
16
" (1253)
29 3 /
4
" (756) 49 15 /
16
" (1268)
W H
30 1 / 2 " (775) 19" (483)
29 1 / 8 " (740) 18 1 / 16 " (459)
29 3 /
4
" (756) 18 11 /
16
" (475)
W
30 1 /
2
" (775)
29 1 /
8
" (740)
29 3 / 4 " (756)
W
19" (483)
A
5 3 /
4
" (146)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
H
39 5 / 8 " (1006)
B
5 1 /
4
" (133)
W
BI-30U / BI-36U
H
B
H
W
BI-30UG / BI-36UG
BI-36U and BI-36UG
REFRIGERATOR
Flush Inset Panel
Spacer Panel
Backer Panel
FREEZER
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
BI-36UG
Window Cut-Out
Cut-Out Location
W
36 1 /
2
" (927)
H
50 1 /
8
" (1273)
35 1 / 8 " (892) 49 5 / 16 " (1253)
35 3 / 4 " (908) 49 15 / 16 " (1268)
36 1 /
2
"
W
(927)
35 1 /
8
" (892) 18 1 /
H
19" (483)
16
" (459)
35 3 / 4 " (908) 18 11 / 16 " (475)
W
36 1 / 2 " (927)
35 1 /
8
" (892)
35 3 /
4
" (908)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
W
25" (635)
A
5 3 / 4 " (146)
H
39 5 /
8
" (1006)
B
5 1 / 4 " (133)
Grille panel dimensions listed are for a standard 84" (2134) finished height. For an 83" (2108) finished height, subtract
1" (25) from grille panel height dimensions. For an 88" (2235) finished height, add 4" (102) to height dimensions.
For dual wide grilles, refer to page 36.
Built-In Refrigeration 36
Dual Installation Kit
INSTALLATION WITH DUAL WIDE GRILLE
This kit will replace the existing grilles that ship with the units and span the entire width of both units. The kit includes a 1 /
4
" (6) center trim strip (required for proper installation of the dual wide grille), heater, dual kickplate and mounting hardware. Dual wide grilles are available for all built-in models and design applications. The overlay dual installation kit with grille will accept overlay and dual flush inset panels. For dual wide grille panel dimensions, refer to the panel specifications below for your design application. Grille panel dimensions listed are for a standard 84" (2134) finished height.
Dual Wide Grille—Overlay
TWO 30" (762) MODELS
Overlay Panel
Spacer Panel
Backer Panel
30" (762) AND 36" (914) MODELS
Overlay Panel
Spacer Panel
Backer Panel
TWO 36" (914) MODELS
Overlay Panel
Spacer Panel
Backer Panel
W
60 1 /
4
" (1530)
59 3 /
8
" (1508)
60" (1524)
W
66 1 / 4 " (1683)
65 3 /
8
" (1661)
66" (1676)
W
72 1 /
4
" (1835)
71 3 / 8 " (1813)
72" (1829)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
H
9 1 /
4
" (235)
8 5 / 16 " (211)
8 15 /
16
" (227)
Dual Wide Grille—Flush Inset
TWO 30" (762) MODELS
Flush Inset Panel
Spacer Panel
Backer Panel
30" (762) AND 36" (914) MODELS
Flush Inset Panel
Spacer Panel
Backer Panel
TWO 36" (914) MODELS
Flush Inset Panel
Spacer Panel
Backer Panel
W
61 1 / 4 " (1556)
59 3 /
8
" (1508)
60" (1524)
W
67 1 / 4 " (1708)
65 3 / 8 " (1661)
66" (1676)
W
73 1 /
4
" (1861)
71 3 /
8
" (1813)
72" (1829)
H
9 1 / 4 " (235)
8 5 /
16
" (211)
8 15 /
16
" (227)
H
9 1 / 4 " (235)
8 5 / 16 " (211)
8 15 /
16
" (227)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
INSTALLATION WITH INDIVIDUAL GRILLES
This kit is available for those who choose to utilize the individual grilles that ship with each unit. The kit includes a
1 /
4
" (6) filler strip (which fills the reveal between the units and grilles), heater and mounting hardware. This dual installation kit is not required if a custom filler strip is used.
The filler strip should be a minimum of 2" (51) wide. Refer to the full-scale template on page 42 for more information.
Built-In Refrigeration 37 subzero.com/specs
Accessories
These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
• Grilles for an 83" (2108) or 88" (2235) finished height.
• Framed front panels in stainless steel and white enamel.
• Flush inset and dual flush inset panels in stainless steel with tubular or pro handles.
• Custom front panel mounting kit.
• Side panel in stainless steel and white enamel.
• Stainless steel tubular and pro handles to match the style of Wolf ovens and ranges.
• Full-length standard and extended framed handles.
• Stainless steel kickplate.
• Dual installation kit with or without dual wide grille.
• Retrofit kits for use with 600 series panels.
• Partial framed kit for dispenser models.
• Dozen egg container.
• 90° door stop.
• Replacement air purification cartridge and water filter.
STANDARD HANDLES
Refer to the chart below for standard handle lengths and the stud spacing of tubular and pro handles used on built-in models.
Standard Handles Length Stud Spacing
FULL-HEIGHT DOOR
Tubular Handle
Pro Handle
63 7 / 8 " (1622)
45 3 / 16 " (1147)
BI-30U(G), BI-36U(G) AND BI-36UFD DOOR(S)
Tubular Handle 44 1 /
4
" (1124)
Pro Handle 37 1 /
2
" (952)
43
43
7
7
36
36
/ 8 " (1114)
/ 8 " (1114)
1
1
/
4
" (921)
/
4
" (921)
BI-30U(G) DRAWER
Tubular Handle
Pro Handle
BI-36U(G) AND BI-36UFD DRAWER
Tubular Handle
Pro Handle
24
17
30
23
5
9
5
/
16
" (633)
/ 16 " (447)
/ 16 " (770)
5 /
8
" (600)
16
16
22
22
5
5
5
5
/
16
" (414)
/ 16 " (414)
/ 16 " (567)
/
16
" (567)
Built-In Refrigeration
Framed Panel Thickness
FULL-SCALE TEMPLATE
OPTIONAL EXTENDED
FULL-LENGTH HANDLE
1"
(25)
STANDARD
FULL-LENGTH HANDLE
2"
(51)
3"
(76)
1 1 / 4 " (32) PANEL
1" (25) PANEL
3 / 4 " (19) PANEL
1 / 2 " (13) PANEL
1 / 4 " (6) FRAMED PANEL
DOOR
PANEL THICKNESS
FRAMED APPLICATION
38
Built-In Refrigeration
Overlay Panel Thickness
FULL-SCALE TEMPLATE
Overlay and flush inset panels must be a minimum of 5 /
8
"
(16) thick to support mounting the handle. Panel thickness does not include backer and spacer panel. Mount handle close to the opening edge of the door.
1"
(25)
2"
(51)
DEPTH OF TUBULAR
AND PRO HANDLES
3"
(76)
1 1 / 4 " (32) PANEL
1" (25) PANEL
3 / 4 " (19) PANEL
.10" (3) SPACER PANEL
1 / 4 " (6) BACKER PANEL
DOOR
PANEL THICKNESS
OVERLAY AND FLUSH INSET APPLICATIONS
39 subzero.com/specs
Built-In Refrigeration
Overlay Application
FULL-SCALE TEMPLATE
23 7 / 8 " (606)
TO REAR OF UNIT
0" (0)
1 / 4 " (6)
1 / 2 " (13)
3 / 4 " (19)
1" (25)
1 1 / 4 " (32)
1 1 / 2 " (38)
1 3 / 4 " (44)
2" (51)
2 1 / 4 " (57)
2 1 / 2 " (63)
2 3 / 4 " (70)
3" (76)
3 1 / 4 " (83)
3 1 / 2 " (89)
1" (25) THICK
PANEL
3 / 4 " (19) THICK
OVERLAY PANEL
(TYPICAL)
1 / 4 " (6) BACKER
PANEL
DOOR OPENING 90°
TOP VIEW
OVERALL WIDTH OF UNIT
0"
SCALE
1" (25)
40
Built-In Refrigeration
Flush Inset Application
FULL-SCALE TEMPLATE
For panels thicker than 3 /
4
" (19) , a 90° door stop may be required to prevent interference with adjacent cabinets.
24" (610)
TO BACK WALL
1 1 / 4 " (32)
2 3 / 16 " (56)
ASSUMES
3 / 4 " (19)
FLUSH INSET
PANEL
THICKNESS
41 subzero.com/specs
1" (25) THICK
PANEL
3 / 4 " (19) THICK
FLUSH INSET PANEL
(TYPICAL)
1 / 4 " (6) BACKER
PANEL
DOOR OPENING 110°
TOP VIEW
0"
SCALE
1" (25)
Built-In Refrigeration
APPROX PROFILE OF
STAINLESS STEEL WRAPPED
DOOR AND HANDLE
FILLER STRIP
1 1 / 4 " (32)
DOOR
CLOSED
42
DOOR
OPEN 110°
Dual Installation—Standard
FULL-SCALE TEMPLATE
Typical framed, overlay or stainless steel dual installation with filler strip at maximum 110° door opening. Depending on panel thickness, a 90° door stop may be required.
0" 1" (25)
STANDARD
TOP VIEW SCALE
Built-In Refrigeration 43 subzero.com/specs
PROFILE OF 3 / 4 " (19) FLUSH INSET PANEL
AND TUBULAR HANDLE
FILLER STRIP
1 1 / 2 " (38)
1 / 2 " (13)
DOOR
CLOSED
DOOR
OPEN 110° Dual Installation—Flush Inset
FULL-SCALE TEMPLATE
Typical flush inset dual installation with filler strip at maximum 110° door opening. Depending on panel thickness, a 90° door stop may be required.
FLUSH INSET
TOP VIEW
0"
SCALE
1" (25)
MODEL 648PROG
PRO 48 Refrigeration 45 subzero.com/specs
PRO 48 Refrigeration.
Freshness finds unmistakable expression in the Sub-Zero PRO 48. An 800-pound monument to food preservation—equal parts sculpted metal design statement and culinary secret weapon. Its vast interior, like its bold exterior, is crafted of stainless steel. The PRO 48 is available with or without a glass door and may be either built in or freestanding.
PRO 48 MODELS
48"
(1219)
84"
(2134)
648PRO
84"
(2134)
648PROG
48"
(1219)
KEY FEATURES
• Can be used freestanding or installed as a standard or flush built-in application.
• Stainless steel interior as well as exterior.
• Handles coordinate with handles of Wolf ranges.
• Dual refrigeration system enhanced with triple evaporators allow independent control of storage conditions in refrigerator cabinet and drawer compartments.
• Advanced water filtration system.
• Slide-out stainless steel bins fit neatly under refrigerator glass shelves.
• Exterior temperature display.
• Flip-up grille provides easy access for quick routine maintenance.
• Star-K certified.
PRO 48 Refrigeration
PRO 48 Models
OVERALL DIMENSIONS
48" (1219)
46
25 7 / 8 " (657)
42
1
/ 8 "
(1070)
84"
(2134)
14 1 / 2 "
(368)
HEIGHT DIMENSIONS ± 1 / 2 " (13)
30 1 / 2 "
(775)
4" (102)
30 3 /
16
"
(767)
21" (533)
23 7 / 8 "
(606)
30 3 / 4 "
(781)
2 3 / 8 " (60)
SPECIFICATIONS
Capacity / Weight
INTERIOR CAPACITY
648PRO and 648PROG
SHIPPING WEIGHT
648PRO
648PROG
MODELS 648PRO AND 648PROG
R CU FT (L)
18.4
(521)
F CU FT (L)
11.7
(331)
LBS (KG)
860 (390)
875 (397)
PRO 48 Refrigeration
PRO 48 Models
STANDARD AND FLUSH BUILT-IN INSTALLATIONS
TOP VIEW
OPENING
DEPTH
47 subzero.com/specs
OPENING
DEPTH
OPENING
HEIGHT
OPENING
WIDTH
SIDE VIEW
Opening Dimensions
Opening Width
Opening Height
Opening Depth
FRONT VIEW
Standard
47 1 /
2
" (1206)
Flush
48" (1219)
83 3 / 4 " (2127) 84 1 / 8 " (2137)
24" (610) 26" (660)
IMPORTANT NOTE: For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry.
In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.
PRO 48 Refrigeration 48
Planning Information
PRO 48 models can be used freestanding or installed as a standard or flush built-in application. For standard built-in installations, the face frame of the unit will extend 2" (51) beyond cabinetry. In flush built-in installations, the front of the face frame will be flush with surrounding cabinetry.
ELECTRICAL REQUIREMENTS
For PRO 48 models, the electrical supply should be located within the shaded area shown in the illustration below. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
115 V AC, 60 Hz
15 amp
3-prong grounding-type
PLUMBING REQUIREMENTS
PRO 48 models come with an automatic ice maker and a water filtration system. The water supply line should be located within the shaded area shown in the illustration below. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit is available through your authorized Sub-Zero dealer. The water line must not interfere with installation of the anti-tip bracket.
IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 35 psi
(2.4 bar) to 120 psi (8.3 bar) supplied to the unit at all times.
In this application, the water filtration system must be set to bypass mode. This is achieved by removing the water filter cartridge. Refer to the PRO 48 installation guide packed with the unit for detailed instructions. A copper line is not recommended for this application.
Plumbing Requirements
Water Supply Line 1 /
4
" OD copper, braided stainless steel or PEX tubing
Water Pressure
Excess Water Line for Connection
35–120 psi (2.4–8.3 bar)
36" (914)
FRONT VIEW
7"
(178)
E
6"
(152)
75 1 /
2
"
(1918)
FROM
FLOOR
Location of electrical supply.
3"
(76)
6"
(152)
5
3
/ 16 "
(132)
FLOOR
FRONT VIEW
Location of water supply.
PRO 48 Refrigeration
Accessories
These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
• Stainless steel side panels and top for freestanding application.
• Stainless steel side panel.
• Stainless steel front and side kickplates.
• Slide-out stainless steel refrigerator bin.
• Refrigerator drawer dividers for compartmentalized storage.
• Dozen egg container.
• 90° door stop.
• Replacement water filter.
49 subzero.com/specs
MODELS IC-27F, 427G (WINE) AND IC-27R
Integrated Refrigeration 51 subzero.com/specs
Integrated Refrigeration.
With custom front panels and hardware, Sub-Zero invented integrated columns, tall and drawer models that disappear into the decor. Integrated units fit flush with other cabinets, making integrated refrigeration as practical and beautiful in the master suite, bar or theatre room as in the kitchen.
INTEGRATED MODELS
27"
(686)
27"
(686)
27"
(686)
27"
(686)
27"
(686)
81"
(2057)
81"
(2057)
80"
(2032)
80"
(2032)
80"
(2032)
IC-27R
36"
(914)
IC-27FI
36"
(914)
700TR
36"
(914)
700TFI 700TCI
80"
(2032)
80"
(2032)
80"
(2032)
27"
(686)
34 1 / 2 "
(876)
700BR
27"
(686)
34 1 / 2 "
(876)
700BF(I)
27"
(686)
34 1 / 2 "
(876)
700BC(I) 736TR 736TFI 736TCI
KEY FEATURES
• Custom front panels and hardware allow for infinite design options.
• Point-of-use refrigeration that can be placed anywhere in the home.
• Dual refrigeration; two compressors preserve food’s goodness in self-contained compartments.
• Energy efficient; many models are ENERGY STAR ® qualified.
• Drawer models are Star-K certified—column and tall models are Star-K compliant with harness kit.
Integrated Refrigeration
Overall Dimensions
COLUMN MODELS
27" (686)
14" (356)
1 5 /
8
"
(41)
78 9 / 16 "
(1995)
81"
(2057)
TO TOP OF
OPENNG
24" (610)
1 /
2
"
(13) ± ADJUSTMENT IN LEVELING LEGS
9
3
/ 4 " (248)
4"
(102)
24"
(610)
4 5 /
8
"
(117)
25 1 / 2 "
(648)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS IC-27R AND IC-27FI
Overall dimensions do not include panels or handles.
27" (686) TALL MODELS
27" (686)
14" (356)
13 /
16
"
(21)
3 / 8 "
(10)
1 /
2
"
(13)
13 1 / 4 "
(337)
20 3 /
8
"
(518)
10 1 / 4 "
(260)
HEIGHT DIMENSIONS ± 1 / 2 " (13)
34
1
/ 2 "
(876)
78 9 / 16 "
(1995)
80"
(2032)
TO TOP OF
OPENNG
9 3 /
4
"
(248)
4"
(102)
24" (610)
24"
(610)
4 5 / 8 "
(117)
25 1 /
2
"
(648)
19 1 /
2
"
(495)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS 700TR, 700TFI AND 700TCI
52
Integrated Refrigeration
Overall Dimensions
36" (914) TALL MODELS
36" (914)
14"
(356)
1 5 / 16 "
(33)
3 / 8 "
(10)
1 /
2
"
(13)
13
1
/ 4 "
(337)
20 3 /
8
"
(518)
10 1 / 4 "
(260)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
34 1 /
2
"
(876)
77 13 / 16 "
(1976)
80"
(2032)
TO TOP OF
OPENNG
9 3 / 4 "
(248)
4"
(102)
24" (610)
24"
(610)
19 1 / 2 "
(495)
7" (178)
34 1 / 2 "
(876)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS 736TR, 736TFI AND 736TCI
53 subzero.com/specs
Integrated Refrigeration 54
Overall Dimensions
DRAWER MODELS
3 / 8 "
(10)
27" (686)
1 / 2 "
(13)
13
1
/ 4 "
(337)
20 3 /
8
"
(518)
10 1 / 4 "
(260)
34
1
/ 2 "
(876)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
9 3 /
4
"
(248)
4"
(102)
24" (610)
24"
(610)
Capacity and Weight
Interior Capacity
COLUMN MODELS
IC-27R
IC-27FI
27" (686) TALL MODELS
700TR
700TFI
700TCI
36" (914) TALL MODELS
736TR
736TFI
736TCI
27 " (686) DRAWER MODELS
700BR
700BF(I)
700BC(I)
R cu ft (L)
16.2
(459)
F cu ft (L)
16.3
(462)
15.5
(439)
10.2
(289)
20.9
(592)
13.3
(377)
5.3
(150)
2.9
(82)
15.3
5.1
21.5
7.1
5.1
2.1
(433)
(144)
(609)
(201)
(144)
(59)
Shipping Weight
IC-27R, IC-27FI, 700TR, 700TFI and 700TCI
736TR, 736TFI and 736TCI
700BR, 700BF(I) and 700BC(I) lbs (kg)
360 (163)
480 (218)
190 (86)
19 1 / 2 "
(495)
25
7
/ 8 " (657)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODELS 700BR, 700BF(I) AND 700BC(I)
Integrated Refrigeration 55 subzero.com/specs
Opening Dimensions
INTEGRATED MODELS
25" (635)
OPENING
DEPTH
TOP VIEW
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635) .
25"
(635)
OPENING DEPTH
B
OPENING
HEIGHT
A
OPENING WIDTH
SIDE VIEW
Opening Dimensions
IC-27R and IC-27FI
700TR, 700TFI, 700TCI
736TR, 736TFI, 736TCI
700BR, 700BF(I), 700BC(I)
FRONT VIEW
A B
27" (686)
27" (686)
81" (2057)
80" (2032)
36" (914) 80" (2032)
27" (686) 34 1 / 2 " (876)
Integrated Refrigeration 56
Electrical Requirements
The electrical supply should be located within the shaded area shown in the illustrations. Follow the National
Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
IMPORTANT NOTE: It is critical that the electrical outlet be located within the shaded area shown so it does not interfere with installation of the anti-tip bracket. It must be flush with the back wall and positioned with the grounding prong to the right of the thinner blades.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
115 V AC, 60 Hz
15 amp
3-prong grounding-type
LEFT SIDE
OF OPENING
LEFT SIDE
OF OPENING
2 1 /
2
"
(64)
13"
(330)
1 /
4
"
(6)
FLOOR
FRONT VIEW
4 1 /
2
"
(114)
27" (686) models.
2 1 / 2 "
(64)
17 1 /
2
"
(445)
1 / 4 "
(6)
FLOOR
FRONT VIEW
4 1 /
2
"
(114)
36" (914) models.
Integrated Refrigeration 57 subzero.com/specs
Plumbing Requirements
For integrated models with an automatic ice maker, the water supply line should be located through the floor or back wall, within the shaded area shown in the illustrations. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit is available through your authorized Sub-Zero dealer.
IMPORTANT NOTE: It is critical that the water line be located within the shaded area shown so it does not interfere with installation of the anti-tip bracket.
IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 20 psi
(1.4 bar) to 100 psi (6.9 bar) supplied to the unit at all times.
In some cases, a reverse osmosis water filter system may not be able to maintain the minimum pressure consistently. A copper line is not recommended for this application.
13
1
/ 2 "
(343)
2 1 /
2
"
(64)
3" (76)
FLOOR
FRONT VIEW
3
/ 4 "
(19)
36" (914) models.
BACK
WALL
6"
(152)
13
1
/ 2 "
(343)
2 1 /
2
"
(64)
1 1 /
2
"
(38)
1 1 /
2
"
(38)
TOP VIEW
Plumbing Requirements
Water Supply Line 1 / 4 " OD copper, braided stainless steel or PEX tubing
Water Pressure
Excess Water Line for Connection
20–100 psi (1.4–6.9 bar)
27" (686)
9"
(229)
2 1 /
2
"
(64)
3" (76)
FLOOR
FRONT VIEW
3
/ 4 "
(19)
27" (686) models.
9"
(229)
BACK
WALL
6"
(152)
2
1
/ 2 " (64)
1
1
/ 2 "
(38)
1 1 /
2
"
(38)
TOP VIEW
Integrated Refrigeration 58
1 / 8 "
(3)
Cabinetry Applications
FRAMELESS CABINETRY
26 3 / 4 " (679)
PANEL WIDTH
1 / 8 "
(3)
26 3 / 4 " (679)
PANEL WIDTH
35 3 / 4 " (908)
PANEL WIDTH
1 / 8 "
(3)
76 7 / 8 "
(1953)
45 3 / 8 "
(1153)
45 3 / 8 "
(1153)
80
7
/ 8 "
(2054)
1 / 8 "
(3)
13 9 / 16 "
(345)
1 / 8 "
(3)
16 11 /
16
"
(424)
4" (102)
27"
(686)
FINISHED OPENING
COLUMN MODELS
4" (102)
27"
(686)
FINISHED OPENING
27" (686) TALL MODELS
Typical Panel Dimensions
COLUMN MODELS
Door
27" (686) TALL MODELS
Door
Top Drawer
Bottom Drawer
36" (914) TALL MODELS
Door
Top Drawer
Bottom Drawer
DRAWER MODELS
Top Drawer
Bottom Drawer
W
26 3 / 4 " (679)
H
76 7 / 8 " (1953)
W
26 3 /
4
" (679)
H
45 3 /
8
" (1153)
26 3 /
4
" (679) 13 9 /
16
" (345)
26 3 / 4 " (679) 16 11 / 16 " (424)
W H
35 3 / 4 " (908)
35 3 /
4
" (908)
45
13
3
9
/ 8 " (1153)
/
16
" (345)
35 3 /
4
" (908) 16 11 /
16
" (424)
W
26 3 /
4
" (679)
H
13 9 /
16
" (345)
26 3 / 4 " (679) 16 11 / 16 " (424)
Panel dimensions are based on a 1 /
8
" (3) reveal. A reveal of up to 1 /
4
" (6) is possible with adjustments to panel dimensions.
79
7
/ 8 "
(2029)
1 / 8 "
(3)
13 9 / 16 "
(345)
1 / 8 "
(3)
16 11 /
16
"
(424)
1 /
8
"
(3)
13 9 /
16
"
(345)
1 / 8 "
(3)
16 11 /
16
"
(424)
4" (102)
36"
(914)
FINISHED OPENING
36" (914) TALL MODELS
26
3
/ 4 " (679)
PANEL WIDTH
34 1 /
2
"
(876)
4" (102)
27" (686)
FINISHED OPENING
DRAWER MODELS
79
7
/ 8 "
(2029)
Integrated Refrigeration 59 subzero.com/specs
Cabinetry Applications
DOOR PANEL HEIGHT
The height of the door panel can extend beyond the typical panel height, provided you do not exceed the panel weight limit. The illustration below shows how the panel may be extended and what you need to consider to finish the area behind the door panel.
IMPORTANT NOTE: The decorative valance used to finish the area behind the door panel must stay behind the front plane of the finished molding.
TOE KICK CLEARANCE
The toe kick clearance can vary with the height of the panel. You must keep a minimum space of 4" (102) clear below the bottom edge of the panel for proper venting. In addition, any decorative base molding must be removable and cannot exceed 4" (102) in height.
OVERALL
HEIGHT
1
/ 8 " (3)
1 / 8 " (3)
MINIMUM
HEIGHT
TYPICAL
HEIGHT
OF DOOR
PANEL
UPPER VALANCE
COLUMN AND TALL MODELS
1 1 /
2
"
(38)
DOOR
PANEL
25"
(635) TO WALL
DECORATIVE VALANCE
CANNOT EXTEND BEYOND
THE FRONT OF THE MOLDING
DECORATIVE VALANCE
HINGE
REMOVABLE MOLDING
INTEGRATED UNIT
(SIDE VIEW)
INTEGRATED UNIT
(SIDE VIEW)
HEIGHT
OF PANEL
KICKPLATE/GRILLE
CAN BE ADJUSTED
FORWARD
KICKPLATE/GRILLE
BASE MOLDING
MUST BE
REMOVABLE—
4" (102) MAX
HEIGHT
4" (102) TO 9" (229)
FROM FLOOR
2 5 / 8 " (67) TO 4" (102)
KICKPLATE / GRILLE AREA
ALL INTEGRATED MODELS
25" (635) TO WALL
Integrated Refrigeration 60
Cabinetry Applications
Integrated refrigeration is compatible with virtually any style and look of cabinetry. These models can be used with framed as well as frameless cabinetry. Because of the precise application and the look you may want to achieve, keep the following considerations in mind:
The thickness of the front panels can vary. A minimum
5 /
8
" (16) thick panel is required, but the thickness can be increased provided the panel weight limit is not exceeded.
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into drywall or bring the cabinets forward to achieve a flush fit.
Reveals between panels can vary. A reveal of 1 /
8
" (3) is typical, but reveals can be increased to up to 1 /
4
" (6) .
As reveals between cabinetry and the unit decrease, the potential exists for severe finger pinching while the door is closing.
IMPORTANT NOTE: The inside edges of the rough opening as well as the sides and a portion of the backside of the decorative panels will need to be finished, as they will be exposed when the doors are open.
D-style handles are recommended. For the cabinet door, handles must be located near the edge of the panel opposite the hinge, centered top to bottom. Locate handles in the top center area of the drawer panels.
Illustrations on the following pages show typical applications of frameless and framed cabinetry. Also refer to the full-scale illustration at the end of this section for specifics on door openings.
Panel Requirements
COLUMN MODELS
Door Panel
TALL AND DRAWER MODELS
27" (686) Door Panel
27" (686) Drawer Panel
36" (914) Door Panel
36" (914) Drawer Panel
PANEL THICKNESS
All Panels
MAX WEIGHT
65 lbs (29 kg)
MAX WEIGHT
40 lbs (18 kg)
12 lbs (5 kg)
53 lbs (24 kg)
16 lbs (7 kg)
MINIMUM
5 /
8
" (16)
When 3 /
4
" (19) or thicker panels are used with a reveal of less than 1 /
4
" (6) , door panels may cause damage to the unit when the door is opened to the maximum 105°.
Use the built-in 90° door stop.
Integrated Refrigeration 61 subzero.com/specs
Cabinetry Applications
The illustrations below show typical applications of framed and frameless cabinetry. Refer to the full-scale templates at the end of this section for specifics on door openings.
Dual Installations
Two integrated units may be placed side by side in a dual installation. Depending on the models specified, opening widths will be 54" (1372) , 63" (1600) or 72" (1829) . Panel width dimensions will vary slightly from single installations.
Refer to the chart below for typical panel dimensions. The dimensions are based on a 1 /
8
" (3) reveal. A reveal of up to
1 /
4
" (6) is possible with adjustments to panel dimensions.
CABINET INTEGRATED
UNIT
CABINET INTEGRATED
UNIT
DOOR
1 / 8 " (3)
REVEAL
PANEL
FINISHED
OPENING
Framed—full overlay.
DOOR
1 / 8 " (3)
REVEAL
PANEL
FINISHED
OPENING
Framed—standard overlay.
Typical Panel Dimensions
COLUMN MODELS
Door
27" (686) MODELS
Door
Top Drawer
Bottom Drawer
36" (914) MODELS
Door
Top Drawer
Bottom Drawer
W
26 13 /
16
" (681)
H
76 7 /
8
" (1953)
W
26 13 /
16
" (681)
H
45 3 /
8
" (1153)
26 13 / 16 " (681) 13 9 / 16 " (345)
26 13 / 16 " (681) 16 11 / 16 " (424)
W
35 13 /
16
" (910)
H
45 3 /
8
" (1153)
35 13 /
16
" (910) 13 9 /
16
" (345)
35 13 / 16 " (910) 16 11 / 16 " (424)
CABINET UNIT CABINET INTEGRATED
UNIT
DOOR
PANEL
1 / 8 " (3)
REVEAL
FINISHED
OPENING
Framed—beaded inset.
DOOR
1 /
8
"
(3)
REVEAL
Frameless cabinetry.
PANEL
FINISHED
OPENING
A dual installation kit is required for installations with 2"
(51) or less space between the units. Dual installation kits are available through your authorized Sub-Zero dealer.
IMPORTANT NOTE: If a 27" (686) unit is installed next to a 36" (914) tall unit, the decorative front panels will align, however, the face frames will not. This is only apparent when both doors are open at the same time. Due to a more robust hinge on 36" (914) units, the face frame was reconfigured to maintain a consistent overall panel height.
Refer to the illustration below.
736TCI
Face frame alignment.
Integrated Refrigeration 62
Accessories
These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
• Stainless steel front panels with tubular or pro handles.
• Stainless steel tubular and pro handles to match the style of Wolf ovens and ranges.
• Dual installation kit.
• Crisper drawer with shelf assembly, deli drawer with shelf and crisper cover with lid for certain models.
• Dozen egg container.
• Harness kit for Star-K compliance.
STANDARD HANDLES
Refer to the chart below for standard handle lengths and the stud spacing of tubular and pro handles used on integrated models.
Standard Handles
DOOR
Tubular Handle
Pro Handle
27" (686) MODEL DRAWERS
Tubular Handle
Pro Handle
36" (914) MODEL DRAWERS
Tubular Handle
Pro Handle
Length Stud Spacing
41 3 /
16
" (1046)
39 9 /
16
" (1006)
33
38 5
1 /
4
" (845)
/
16
" (973)
24 3 / 16 " (614) 16 1 / 4 " (413)
21" (533) 19 11 / 16 " (500)
33 3 /
16
" (843)
30" (762)
25 1 /
4
" (641)
28 3 /
4
" (730)
Integrated Refrigeration 63 subzero.com/specs
Maximum Door Opening
FULL-SCALE TEMPLATE
If the panel is thicker than 3 /
4
" (19) , use the built-in 90° door stop to prevent damage to the panel and face frame at the maximum door opening.
INTEGRATED
DOOR
MAXIMUM 105° OPENING
105° OPENING
TOP VIEW—1/4 SCALE
LINE OF INTERFERENCE
MAXIMUM 105° OPENING
1 / 8 " (3) MINIMUM REVEAL
FRAMED PANEL
3 / 4 " (19)
MOUNTING BRACKET
INTEGRATED DOOR CLOSED
LINE OF
INTERFERENCE
LINE OF INTERFERENCE
SIDE MOLDING AND
INSTALLATION HARDWARE
DOOR CLOSED
TOP VIEW—FULL-SCALE
0"
SCALE
1" (25)
MODEL WS-30
Wine Storage 65 subzero.com/specs
Wine Storage.
Wine finds a well-deserved place of honor in a Sub-Zero wine storage unit. Every detail is designed to ensure better wine preservation. Cherrywood-faced shelves, soft lighting, custom cabinetry if desired—Sub-Zero helps make a wine collection an element of beauty in the home.
WINE STORAGE MODELS
34 1 / 16
"
(865)
15 1 /
8
"
(384)
315W
23 7 / 8
"
(606)
34"
(864)
424G
27"
(686)
24 1 / 4 "
(616)
34 3 / 16 "
(868)
424FSG
80"
(2032)
427G
80"
(2032)
27"
(686)
427RG
84"
(2134)
30"
(762)
WS-30
KEY FEATURES
• Integrated, overlay, flush inset and stainless steel design options.
• Full-view glass door standard on all models.
• Freestanding model 424FSG does not require panels or surrounding cabinetry.
• Discreet interior lighting with illuminated display shelf for prized bottles of wine.
• Two independent storage zones maintain temperature, humidity and UV protection.
• Roller-assembly wine shelves with natural cherrywood facing have three-quarter extension for easy access.
• Wine shelves accommodate 750 ml bottles, halfbottles and magnums.
Wine Storage
Overall Dimensions
UNDERCOUNTER WINE STORAGE
15 1 /
8
"
(384)
24"
(610)
34 1 /
16
"
(865)
4"
(102)
23 7 / 8 " (606)
34"
(864)
4" (102)
24" (610)
16 5 /
8
"
(422)
1
3
/ 4 " (44)
MODEL 315W
Refer to page 83 for door clearance information.
25
3
/ 8 "
(645)
1 3 /
4
"
(44)
MODEL 424G
Refer to page 83 for door clearance information.
66
Overall dimensions are based on stainless steel panels and handles.
Wine Storage 67 subzero.com/specs
Overall Dimensions
FULL-SIZE WINE STORAGE
27" (686)
14" (356)
13 /
16
"
(21)
78 9 / 16 "
(1995)
80"
(2032)
OPENING
HEIGHT
24" (610)
HEIGHT DIMENSIONS ± 1 / 2 " (13)
8 15 /
16
"
(227)
4"
(102)
24"
(610)
4 5 / 8 "
(117)
25 1 /
2
"
(648)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODEL 427G
Overall dimensions do not include panels or handles.
27" (686)
14" (356)
13 /
16
"
(21)
3 / 8 "
(10)
1 /
2
"
(13)
13 1 / 4 "
(337)
20 3 /
8
"
(518)
10 1 / 4 "
(260)
HEIGHT DIMENSIONS ± 1 / 2 " (13)
34
1
/ 2 "
(876)
78 9 / 16 "
(1995)
80"
(2032)
OPENING
HEIGHT
9 3 /
4
"
(248)
4"
(102)
24" (610)
24"
(610)
4 5 / 8 "
(117)
25 1 /
2
"
(648)
19 1 /
2
"
(495)
DIMENSIONS WILL VARY WITH PANEL THICKNESS
MODEL 427RG
WITH REFRIGERATOR DRAWERS
Wine Storage 68
Overall Dimensions
FULL-SIZE WINE STORAGE
30"
(762)
73 3 /
4
"
(1873)
84"
(2134)
24"
(610)
Capacity and Weight
Storage Capacity
315W
424G
427G
427RG
WS-30
Shipping Weight
315W
424G
424FSG
427G
427RG
WS-30
Bottles (750 ml) R cu ft (L)
26
46
132
78
147
5.3
(150) lbs (kg)
118 (54)
195 (88)
220 (100)
395 (179)
410 (186)
445 (202)
23 7 /
8
"
(606)
HEIGHT DIMENSIONS ± 1
/
2
"
(13)
4" (102)
23 7 /
8
"
(606)
17"
(432)
31
1
/ 4 "
(796)
2 3 /
8
"
(60)
MODEL WS-30
Overall dimensions are based on the stainless steel model.
For flush inset applications, add 1 /
2
" (13) to door clearance dimensions.
Wine Storage
Opening Dimensions
UNDERCOUNTER WINE STORAGE
24" (610)
OPENING
DEPTH
TOP VIEW
69 subzero.com/specs
FULL-SIZE WINE STORAGE
25" (635)
OPENING
DEPTH
TOP VIEW
24"
(610)
OPENING DEPTH
34 1 / 2 " (876)
OPENING
HEIGHT
A
OPENING WIDTH
SIDE VIEW
MODELS 315W AND 424G
Opening Width
315W
424G
FRONT VIEW
A
15 1 /
4
" (387)
24" (610)
25"
(635)
OPENING DEPTH
80"
(2032)
OPENING
HEIGHT
27"
(686)
OPENING WIDTH
SIDE VIEW
MODELS 427G AND 427RG
FRONT VIEW
IMPORTANT NOTE: The depth of each integrated model is
24" (610) from the front of the unit to its back. Your design may necessitate moving the unit back or cabinets forward to achieve a flush fit. This will require a minimum rough opening depth of 25" (635) .
Wine Storage 70
Opening Dimensions
FULL-SIZE WINE STORAGE
24"
(610)
OPENING
DEPTH
TOP VIEW
IMPORTANT NOTE: If an 83" (2108) grille height is specified, the opening height must be decreased by 7 / 8 " (22) . If an 88"
(2235) grille height is specified, the opening height increases by 4" (102) .
If two units are installed side by side, refer to pages 30–31 for dual standard installations.
24"
(610)
OPENING DEPTH
83
3
/ 4 "
(2127)
OPENING
HEIGHT
29 1 / 2 " (746)
OPENING WIDTH
SIDE VIEW
MODEL WS-30
FRONT VIEW
Wine Storage 71 subzero.com/specs
Planning Information
ELECTRICAL REQUIREMENTS
The electrical supply should be located within the shaded area shown in the illustration for your specific model.
For model 315W, the electrical supply can be located anywhere on the back wall of the opening. Follow the
National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required. A ground fault circuit interrupter (GFCI) is not recommended and may cause interruption of operation.
If you will be connecting the unit to a home security system, you must allow a minimum of 36" (914) of the system’s wiring to be routed in the electrical area designated for your model.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
FRONT VIEW
7"
(178)
E
6"
(152)
Model WS-30.
75 1 /
2
"
(1918)
FROM
FLOOR
LEFT SIDE
OF OPENING
LEFT SIDE
OF OPENING
2"
(51)
15 1 /
2
"
(394)
FRONT VIEW
3"
(76)
Model 424G.
2 1 /
2
"
(64)
13"
(330)
1 /
4
"
(6)
FLOOR
FRONT VIEW
4 1 /
2
"
(114)
Models 427G and 427RG.
115 V AC, 60 Hz
15 amp
3-prong grounding-type
Wine Storage 72
Door Panels
Unless you are installing a stainless steel model, you will need to provide a frame for the glass door. If you order a stainless steel unit, models 315W, 424G, 424FSG and
WS-30 will be shipped with their panels and hardware installed. For models 427G and 427RG, optional stainless steel panels or custom panels will need to be installed.
The glass door is designed to be exposed to room air circulation. Decorative overlays on the glass should be kept to a minimum. Also, rails and stiles can be increased in size but should not exceed the cabinet manufacturers’ standard width and cannot exceed the overall door panel dimensions listed in the charts.
The back sides of rails and stiles that will be visible through the glass door will need to be finished. Also, the inside edges of the frames must be finished to match the front surface.
FREESTANDING MODEL 424FSG
Model 424FSG does not require any panels or surrounding cabinetry. It has a beautiful stainless steel exterior that is designed to be used in a freestanding application.
Overlay Panels
MODELS 315W AND 424G
The overlay panel applied to models 315W and 424G should not be confused with the built-in overlay panel application. The overlay panel will consist of just a frame and would be either the 5 /
8
" (16) or 3 /
4
" (19) thick panel you may be using. It is affixed directly to the door itself with screws through a series of predrilled holes in the door frame. A backer and spacer panel is not required.
Model 315W and 424G can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit so that it extends 1 /
4
" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between the door panel and adjoining cabinetry up to a 145° door opening. Refer to the full-scale template at the end of this section.
Overlay Panels
PANEL DIMENSIONS
315W
424G
MIN WIDTH
Stiles and Rails
MAX PANEL WEIGHT
Door Frame (315W)
Door Frame (424G)
MIN PANEL THICKNESS
All Panels
W
15" (381)
23 3 /
4
" (603)
H
30 1 /
16
" (764)
30 1 /
16
" (764)
2 1 /
4
" (57)
10 lbs (5 kg)
10 lbs (5 kg)
5 / 8 " (16)
Wine Storage 73 subzero.com/specs
Integrated Panels
MODELS 427G AND 427RG
The integrated full panels or frame panels for glass doors for these models will follow some of the identical planning processes used with the integrated line. The installation of the door panels is completely different, however. Rather than using the mounting hardware we used with the integrated line, door panels for both models 427G and 427RG will be applied with screws applied through our door.
The drawer panels for the model 427RG will be applied using the integrated technique of mounting brackets.
IMPORTANT NOTE: The depth of models 427G and
427RG is 24" (610) from the front of the unit to its back.
You must allow for the thickness of the panel you are applying when planning for the finished rough opening depth if you want the front panel to be flush with surrounding cabinetry. You may have to move the unit back into the drywall or bring the cabinets forward. Refer to the integrated section.
Panel dimensions listed in the chart assume the models finish off at 80" (2032) in height overall and have a 4" (102) toe kick for the model 427G. If you finish off at 84" (2134) , for instance, you must add an additional 4" (102) to the finished height of the panel and 4" (102) to the top rail.
Likewise, if you allow for a 6" (152) toe kick for the model
427G, you must subtract 2" (51) from the bottom rail.
The height of the door panel for models 427G and 427RG can extend beyond the typical panel height, provided you do not exceed the panel weight limit. Refer to specifications on page 59 of the integrated section.
The toe kick area on model 427G cannot be larger than 6"
(152) , and on model 427RG, no larger than 9" (229) . The toe kick area for either model cannot be less than 4" (102) .
If you are installing an optional lock kit on models 427G or 427RG, you may have to order door panels that exceed the 80" (2032) finished height. Consult the lock kit installation instructions and see if your panels will allow for an adequate installation. These instructions are available on our website, subzero.com.
Integrated Panels
427G
Door
427RG
Door
Top Drawer
Bottom Drawer
Panel Requirements
MIN WIDTH
Stiles
Top Rail
Bottom Rail (427G)
Bottom Rail (427RG)
MAX PANEL WEIGHT
Door Frame
Drawer Panel (427RG)
MIN PANEL THICKNESS
All Panels
W
26 3 /
4
" (679)
H
75 7 /
8
" (1927)
W
26 3 /
4
" (679)
H
45 3 /
8
" (1153)
26 3 /
4
" (679) 13 9 /
16
" (345)
26 3 / 4 " (679) 16 11 / 16 " (424)
2 1 / 4 " (57)
3 3 /
4
" (95)
8" (203)
3" (76)
20 lbs (9 kg)
12 lbs (5 kg)
5 /
8
" (16)
DUAL INSTALLATIONS
For information on dual installations for models 427G and
427RG, refer to the integrated dual installations section on page 61.
Wine Storage 74
Model WS-30
FRAMED PANEL
If the thickness of the framed panel is less than 1 /
4
" (6) , it must be backed up with a sheet of shim material to build the total thickness to 1 /
4
" (6) . If the panel is thicker than
1 /
4
" (6) , a routed edge must be provided around the panel to ensure a proper fit. Refer to the illustration below.
Routing, recessing or an extended handle may be required on raised panels for finger clearance under the handle.
IMPORTANT NOTE: Do not cover the glass door with a solid panel. The window cut-out edges of the framed panel will need to be finished, as they will be exposed.
FRAMED PANEL SPECIFICATIONS
A
A
A
H
Framed Panel Requirements
MODEL WS-30
Max Panel Weight
Min Panel Thickness
75 lbs (34 kg)
1 / 4 " (6)
A
W
WS-30 Framed
DOOR
Door Panel
WINDOW
Cut-Out
Location
W H
29 3 /
4
" (756) 69 9 /
16
" (1767)
W H
23 1 / 2 " (597) 63 5 / 16 " (1608)
A
3 1 /
8
" (79)
TRIM
REVEAL
1 / 4 " (6) min
MAIN FRAME
ROUT TO
1 / 4 " (6)
DOOR
FRAME
GLASS
Raised framed panel.
Wine Storage 75 subzero.com/specs
Model WS-30
OVERLAY PANEL
Overlay model WS-30 can be used in an overlay or flush inset application. The specific application will affect panel sizes, opening dimensions and the installation.
Overlay model WS-30 will be shipped without handle hardware and with an overlay panel grille as standard equipment. Along with the door panel, you will need to provide a panel for the grille and hardware to complement your surrounding cabinetry.
The overlay design allows the decorative panel to cover the door trim for a more seamless appearance. The most common way to achieve this look is to work with three panels—the decorative overlay panel, which is typically
3 /
4
" (19) , a .10" (3) spacer panel and a 1 /
4
" (6) backer panel.
Depending on your cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the overlay panel is critical, it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with a solid panel. The window cut-out edges of the overlay, spacer and backer panels will need to be finished, as they will be exposed.
Overlay Panel Requirements
MODEL WS-30
Max Panel Weight
Min Panel Thickness
75 lbs (34 kg)
5 / 8 " (16)
OVERLAY PANEL SPECIFICATIONS
H
A
A A
H
A
W
WS-30 Overlay
DOOR
Overlay Panel
Spacer Panel
Backer Panel
GRILLE
Overlay Panel
Spacer Panel
Backer Panel
WINDOW
Cut-Out
Location
W
30" (762) 69 3 /
4
"
H
(1772)
29 1 / 8 " (740) 68 15 / 16 " (1751)
29 3 / 4 " (756) 69 9 / 16 " (1767)
W
30" (762)
29 1 /
8
" (740)
29 3 / 4 " (756)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
W
23 1 / 2 " (597)
H
63 1 / 4 " (1607)
A
3 1 /
4
" (83)
Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Do not exceed overlay panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
SPACER PANEL
OVERLAY
PANEL
SPACER
PANEL
OVERLAY PANEL
BACKER PANEL
TRIM
DOOR FRAME GLASS
1 / 8 "
(3)
5 /
16
"
(8) min
BACKER
PANEL
3
/ 4 "
(19) typical
.10"
(3)
1 /
4
"
(6)
Panel assembly cross section. Panel assembly rear view.
Wine Storage 76
Model WS-30
FLUSH INSET PANEL
Overlay model WS-30 used in a flush inset application allows the decorative panel to cover the door trim for a seamless appearance. The most common way to achieve this look is to work with three panels—the decorative flush inset panel, which is typically 3 /
4
" (19) , a .10" (3) spacer panel and a 1 /
4
" (6) backer panel. Depending on your cabinet manufacturer, this could be one panel routed for different dimensions. The illustrations below will give you a better idea of the panel construction and how it interacts with our frame. The size of the flush inset panel is critical, it must fit over the door frame.
IMPORTANT NOTE: Do not cover the glass door with a solid panel. The inside edges of the rough opening as well as the sides and a portion of the back side of the decorative panels will need to be finished, as they will be exposed when the doors are open. The window cut-out edges of the overlay, spacer and backer panels will also need to be finished.
IMPORTANT NOTE: For flush inset panels thicker than
3 /
4
" (19) , a 90° door stop may be required to prevent interference with adjacent cabinets.
Flush Inset Panel Requirements
MODEL WS-30
Max Panel Weight
Min Panel Thickness
75 lbs (34 kg)
5 /
8
" (16)
FLUSH INSET PANEL SPECIFICATIONS
H
A
A A
H
A
W
WS-30 Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
WINDOW
Cut-Out
Location
W
31" (787) 69 3 /
4
"
H
(1772)
29 1 / 8 " (740) 68 15 / 16 " (1751)
29 3 / 4 " (756) 69 9 / 16 " (1767)
W
31" (787)
29 1 /
8
" (740)
29 3 / 4 " (756)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
W
23 1 / 2 " (597)
H
62 1 / 4 " (1581)
A
3 3 /
4
" (95)
Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
SPACER PANEL FLUSH INSET
PANEL
SPACER
PANEL
FLUSH INSET PANEL
BACKER PANEL
TRIM
5 / 16 " (8) min
9 / 16 "
(14)
Panel assembly cross section.
BACKER
PANEL
3 /
4
"
(19) typical
.10"
(3)
1 /
4
"
(6)
Panel assembly rear view.
Do not exceed flush inset panel dimensions, as this could cause damage to panels and the Sub-Zero unit.
Wine Storage 77 subzero.com/specs
Model WS-30
FLUSH INSET PANEL
Illustrations A–D provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations.
For additional information on panel reveals, visit the specification library section of our website, subzerotrade.com.
Panel Offsets
MODEL WS-30
Door / Grille Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
TOP VIEW
DOOR / DRAWER / GRILLE
BACKER
SPACER
CABINETRY
FLUSH INSET PANEL
5 /
16
"
(8)
5 / 8 "
(16)
1 / 2 "
(13)
Illus. A
GRILLE
Illus. B
CABINETRY
1 /
2
"
(13)
5
/ 16 "
1 /
8
"
(3)
(8)
SIDE VIEW
DOOR /
DRAWER
GRILLE
DOOR
5 /
16
"
(8)
5 / 32 "
(4)
1
/ 2 " (13)
5 /
16
"
3 / 32 "
(2)
(8)
SIDE VIEW
5
/ 16 "
(8)
SIDE VIEW
3 / 32 "
(2)
Illus. C Illus. D
Illus.
C
D
A
B
DUAL INSTALLATIONS
When two models WS-30 or a model WS-30 and built-in unit are installed side by side, a dual installation kit may be required. Contact your authorized Sub-Zero dealer for the proper components and installation instructions. For questions relative to the installation, call Sub-Zero at
800-222-7820. For local dealer information, visit the find a showroom section of our website, subzero.com.
DUAL STANDARD INSTALLATIONS
Two framed, overlay or stainless steel units may be placed side by side in a dual installation. Some dual standard installations will require a dual installation kit, available through your authorized Sub-Zero dealer.
A custom filler strip can be used in between two units in a framed, overlay or stainless steel design application. It is recommended that the filler strip be at least 2" (51) wide, to prevent condensation between the units. Be sure to add the filler strip width to your rough opening width.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip.
IMPORTANT NOTE: For the application shown in illustration A, a dual installation accessory kit is required.
WITHOUT FILLER STRIP
Illus. A
FILLER STRIP REQUIRED
Illus. B
FILLER STRIP REQUIRED
Illus. C
Wine Storage 78
Model WS-30
DUAL FLUSH INSET INSTALLATIONS
Installing two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application will require adjustments to the dimensions of your finished rough opening, panel sizes and panel offsets. It will also require a dual installation kit, available through your authorized Sub-Zero dealer.
Dual installations without a filler strip can only be accomplished using two units with opposite hinges as shown in illustration A below. The dual installations shown in illustrations B and C require a filler strip. Illustration A is the only application that will accommodate the dual wide grille.
IMPORTANT NOTE: The application shown in illustration A can only be achieved by installing dual flush inset panels.
Failure to install dual flush inset panels will cause the handle side of the panels to collide when closing. In this application a dual installation accessory kit is also required.
Dual flush inset panels and dual installation kits are available through your authorized Sub-Zero dealer. Refer to the illustration and chart for dual flush inset panel specifications.
WITHOUT FILLER STRIP FILLER STRIP REQUIRED FILLER STRIP REQUIRED
DUAL FLUSH INSET PANEL SPECIFICATIONS
H
A
A A
H
A
W
WS-30 Dual Flush Inset
DOOR
Flush Inset Panel
Spacer Panel
Backer Panel
GRILLE
Flush Inset Panel
Spacer Panel
Backer Panel
WINDOW
Cut-Out
Location
W
30 1 /
2
" (775)
H
69 3 /
4
" (1772)
29 1 / 8 " (740) 68 15 / 16 " (1751)
29 3 / 4 " (756) 69 9 / 16 " (1767)
W
30 1 /
2
" (775)
29 1 /
8
" (740)
29 3 / 4 " (756)
H
9 1 /
4
" (235)
8 5 /
16
" (211)
8 15 / 16 " (227)
W
23" (584)
H
62 1 / 4 " (1581)
A
3 3 /
4
" (95)
Grille panel dimensions listed are for a standard 84" (2134) overall height of the unit. For an 83" (2108) overall height, subtract 1" (25) from grille panel height dimensions. For an
88" (2235) overall height, add 4" (102) to height dimensions.
Illus. A Illus. B Illus. C
Wine Storage 79 subzero.com/specs
Model WS-30
DUAL FLUSH INSET PANELS
When installing two models WS-30 or a model WS-30 and built-in unit side by side in a flush inset application, you must decrease the width of the decorative flush inset panels by 1 /
2
" (13) . Adjustments to the panel offsets will also need to be made. These adjustments are needed to achieve a proper fit and to ensure the panels do not collide when closing. Panel dimensions in the chart below have been adjusted to reflect the decrease in panel dimensions.
IMPORTANT NOTE: If a filler strip is not used, dual installations can only be accomplished using two units with opposite hinges.
Illustrations A–E provide panel offsets and reveals for model WS-30 in a flush inset application. Refer to the chart below for reference to the illustrations. All reveals are 1 /
2
" (13) unless otherwise specified.
For additional information on panel reveals, visit the specification library section of our website, subzerotrade.com.
TOP VIEW
DOOR / DRAWER / GRILLE
DOOR
BACKER
SPACER
CABINETRY
FLUSH INSET PANEL
5 /
16
"
(8)
5 /
8
"
(16)
1 /
2
"
(13)
Illus. A
5 /
16
"
(8)
1 /
8
"
(3)
Illus. B
TOP VIEW
DUAL
TRIM
1 /
4
"
(6)
REVEAL
DOOR
CABINETRY
GRILLE
1 / 2 " (13)
5 /
16
"
1 / 8 "
(3)
(8)
SIDE VIEW
GRILLE
DOOR
5
/ 16 "
(8)
5 /
32
"
(4)
1 / 2 " (13)
5
/ 16 "
(8)
3 /
32
"
(2)
SIDE VIEW
Do not exceed the flush inset decorative panel dimensions. Exceeding dimensions could cause damage to the panels and the Sub-Zero unit.
Illus. C
DOOR /
DRAWER
Illus. D
Panel Offsets
MODEL WS-30
Doors (hinge) / Grille Sides
Doors (handle) Sides
Grille Top
Grille Bottom / Door Top
Door Bottom
Illus.
A
B
C
D
E
5 /
16
"
(8)
SIDE VIEW
3
/ 32 "
(2)
Illus. E
Wine Storage 80
Side Panels
MODEL WS-30
When planning for side panels with the installation of the model WS-30, you need to be aware of the space configuration to achieve a pleasing fit. Depending on the exact panel you are using, the height of the panel may vary.
IMPORTANT NOTE: The use of side panels may change the width of your rough opening.
When installing a model WS-30 with a custom side panel, an accessory kit is required. Stainless steel side panels are also available through your authorized Sub-Zero dealer.
The side panel will need to be a minimum of 24" (610) deep and 1 /
2
" (13) thick. Refer to the illustrations below for side panel dimensions. Routing will be necessary so that the side panel fits flush against the side of the unit.
Handle Hardware
For overlay and integrated models, handle hardware must be provided. Optional stainless steel tubular and pro handles are available through your authorized Sub-Zero dealer.
The door frame has numerous mounting holes on each side to accommodate handle hardware. Using the predrilled holes to attach the handle will provide the best alignment and strength.
IMPORTANT NOTE: Refer to the full-scale template at the end of this section for a profile of the door frame and position of the glass. Do not drill through the glass.
24" (610)
ROUT TO
1 /
8
"
(3)
1 7 /
8
"
(48)
1" (25)
FRONT
OF SIDE
PANEL
1"
(25)
1 7 /
8
"
(48)
84"
(2134)
1 / 8 " (3)
1 /
2
"
(13)
MAIN
FRAME
SIDE PANEL
ROUTING
Routing detail.
4"
(102)
OPTIONAL
TOE KICK
CUT-OUT
Side panel dimensions.
2 5 / 8 "
(67)
Wine Storage 81 subzero.com/specs
Accessories
These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
• Stainless steel front panel with tubular or pro handle.
• Stainless steel tubular and pro handles to match the style of Wolf ovens and ranges.
• Grille for an 83" (2108) or 88" (2235) finished height for model WS-30.
• Side panel in stainless steel or white enamel and stainless steel kickplate for model WS-30.
• Full-length standard or extended framed handle for model WS-30.
• Dual installation kit.
• UL approved door lock.
• 90° door stop for model WS-30.
• Harness kit for Star-K compliance.
STANDARD HANDLES
Refer to the chart below for standard handle lengths and the stud spacing of tubular and pro handles used on wine storage models.
Standard Handles Length Stud Spacing
315W, 424G, 424FSG, 427RG DRAWERS
Tubular Handle
Pro Handle
24 3 /
16
" (614) 16 1 /
4
" (413)
21" (533) 19 11 / 16 " (500)
427G AND 427RG DOOR
Tubular Handle
Pro Handle
41
39
3
9
/
16
" (1046)
/
16
" (1006)
33
38 5
1 /
4
" (845)
/
16
" (973)
WS-30
Tubular Handle
Pro Handle
63
45 3
7 /
8
" (1622)
/ 16 " (1147)
43
43
7
7
/
8
" (1114)
/ 8 " (1114)
Door Frame Profile
FULL-SCALE TEMPLATE
The full-scale template below shows an example of the door frame profile for wine storage models and the relationship to the overlay panel (rails and stiles).
Dimension
424G and 315W
427G and 427RG
WS-30
A
2 1 / 4 " (57) Rail / Stile
A
DOOR FRAME PROFILE
MODEL 424G SHOWN
Glass
A
1" (25)
7 /
8
" (22)
15 /
16
" (24)
Cabinet Door
Profile
Wine Storage 82
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
For each model, the wine storage shelves have a natural cherrywood facing. You can replace these strips with wood more complementary to your design and surrounding cabinetry. Refer to the full-scale template below.
To remove the cherry strips, take the shelves out and remove the screws. Reverse the procedure to affix the new wood facing.
IMPORTANT NOTE: If you choose to stain or seal the wood facing, be aware that some of these substances are hazardous and will damage stored wine.
Dimension
315W
424G and 424FSG
427G and 427RG
WS-30
A
10 15 / 16 " (278)
19 1 / 2 " (495)
20 15 /
15
" (532)
24 9 /
16
" (624)
Dimensions will vary for model 315W. Refer to specifications on our website, subzero.com.
A
(WIDTH)
FRONT VIEW
WINE SHELF WOOD FACING
WINE STORAGE MODELS
7 / 64 "
(3)
1 1 / 2 " (38)
27 / 32 "
(21)
5 / 64 "
(2)
5 / 8 "
(16)
Maximum Thickness
23 / 64 "
(9)
9 / 16 " (14)
SIDE VIEW
Wine Storage
Door Clearance—Undercounter Models
FULL-SCALE TEMPLATE
To allow for a 145° door opening, the unit should extend a minimum of
1 /
4
" (6) beyond the front surface of adjacent cabinetry. The unit can be installed flush, however, there is potential for interference with the panel if the door is opened past 90°.
UNDERCOUNTER
UNIT
DOOR CLOSED
3 / 4 " (19) DOOR PANEL
DOOR OPENING 145°
TOP VIEW
0"
SCALE
1" (25)
83 subzero.com/specs
ADJACENT
CABINETRY
1 / 2 "
(13)
1 / 8 " (3)
1 / 4 " (6)
HINGE DETENT
AT 145° OPENING
(DOOR OPENS PAST 145°)
MODELS 424G (WINE) AND UC-24BG
Undercounter Refrigeration 85 subzero.com/specs
Undercounter Refrigeration.
Sub-Zero undercounter refrigeration is a helpful addition to a master suite, bar, home office or media room. In the kitchen, a high-volume ice machine is a must for entertaining. The design flexibility of these compact yet roomy units makes them all the more welcome in any room or outdoor kitchen. They’re ready to be fitted with a custom cabinet panel or can be ordered with a stainless steel panel.
UNDERCOUNTER MODELS
23 7 /
(606)
8
" 23 7 / 8
"
(606)
34"
(864)
34"
(864)
UC-24R UC-24BG
23 7 / 8
"
(606)
34"
(864)
UC-24C(I)
23 7 / 8
"
(606)
34"
(864)
UC-24RO
33 5 /
8
(854)
"
15"
(381)
UC-15I(P)
33 5 /
8
(854)
"
15"
(381)
UC-15I(P)O
KEY FEATURES
• Overlay and stainless steel design applications.
• Handle options coordinate with handles of Wolf cooking products.
• Models UC-24RO and UC-15I(P)O are UL approved for outdoor use.
• Energy efficient; many models are ENERGY STAR ® qualified.
• All models are Star-K certified.
Undercounter Refrigeration
Overall Dimensions
UNDERCOUNTER MODELS
23 7 /
8
"
(606)
24"
(610)
34"
(864)
4" (102)
14
3
/ 4 " (375)
33 5 /
8
"
(854)
4"
(102)
23" (584)
25 3 /
8
"
(645)
6"
(152)
18"
(457)
1 3 / 4 " (44)
MODELS UC-24R, UC-24BG, UC-24C(I) AND UC-24RO
Refer to page 83 for door clearance information.
Specifications
Capacity / Weight
INTERIOR CAPACITY
UC-24R, UC-24BG and UC-24RO
UC-24C(I)
ICE STORAGE CAPACITY
UC-15I(P) and UC-15I(P)O
R CU FT (L)
5.7
(161)
3.6
SHIPPING WEIGHT
UC-24R, UC-24BG, UC-24C(I) and UC-24RO
UC-15I(P) and UC-15I(P)O
(102)
F CU FT (L)
1.1
(31)
LBS (KG)
26 (12)
LBS (KG)
130 (59)
100 (45)
MODELS UC-15I(P) and UC-15I(P)O
Model UC-15I overall dimensions do not include panel or handle.
86
Undercounter Refrigeration 87 subzero.com/specs
Opening Dimensions
UNDERCOUNTER MODELS
24"
(610)
OPENING
DEPTH
TOP VIEW
24"
(610)
OPENING DEPTH
34 1 / 2 " (876)
OPENING
HEIGHT
A
OPENING WIDTH
Planning Information
ELECTRICAL REQUIREMENTS
For ice machine models, it is recommended that electrical supply be placed in an adjacent cabinet. For all other undercounter models, locate the electrical supply within the shaded area shown in the illustration below. Follow the National Electrical Code and local codes and ordinances when installing the receptacle. A separate circuit, servicing only this appliance, is required.
IMPORTANT NOTE: Models UC-24RO and UC-15I(P)O are designed and safe for use in outdoor applications. When installed outdoors, a ground fault circuit interrupter (GFCI) is required to reduce the risk of electrical shock. A GFCI is not recommended for use with other undercounter models and may cause interruption of operation.
Electrical Requirements
Power Supply
Circuit Breaker
Receptacle
115 V AC, 60 Hz
15 amp
3-prong grounding-type
SIDE VIEW
Opening Width
UC-24R, UC-24BG, UC-24C(I) and UC-24RO
UC-15I(P) and UC-15I(P)O
FRONT VIEW
A
24" (610)
15 1 /
4
" (387)
LEFT SIDE
OF OPENING
2" (51)
15 1 /
2
"
(394)
3" (76)
FRONT VIEW
Location of electrical supply.
Undercounter Refrigeration 88
Planning Information
PLUMBING REQUIREMENTS
For model UC-24CI and ice machine models, the water supply line should be located within the shaded area shown in the illustrations below. The water supply line should be connected to the house supply with an easily accessible shut-off valve between the supply and the unit. Do not use self-piercing valves. A saddle valve kit is available through your authorized Sub-Zero dealer.
IMPORTANT NOTE: A reverse osmosis system can be used provided there is constant water pressure of 20–100 psi (1.4–6.9 bar) supplied to model UC-24CI, and 20–80 psi
(1.4–5.5 bar) to model UC-15I at all times. A copper line is not recommended for this application.
Plumbing Requirements
Water Supply Line 1 / 4 " OD copper, braided stainless steel or PEX tubing
Water Pressure (UC-24I)
Water Pressure (UC-15I)
Excess Water Line for Connection
20–100 psi
20–80 psi
(1.4–6.9 bar)
(1.4–5.5 bar)
26" (660) min
Drain Pump
ICE MACHINE MODELS
Undercounter ice machine models can be ordered with or without a pump. Models without a drain pump will drain water from the unit by gravity. A drain must be installed.
The drain and inlet water tubes must be plumbed before connecting to the ice machine. For the gravity drain, all horizontal runs of drain lines must have a 1 /
4
" (6) per 12"
(305) fall. An air gap will likely be required between the unit and drain receptacle. A stand pipe with a trap below it would be acceptable for the drain receptacle.
IMPORTANT NOTE: Poor drainage will cause excessive ice melting in the ice bin.
SHADED AREA
EXTENDS 1
/
2
"
(13)
FROM BACK WALL
2"
(51)
15 1 / 2 "
(394)
FRONT VIEW
3" (76)
Model UC-24CI.
8"
(203)
1 /
2
"
(13)
LOCATION OF
WATER LINE
TOP VIEW
Ice machine models.
Undercounter Refrigeration 89 subzero.com/specs
Overlay Panel
MODELS UC-24R, UC-24C(I) AND UC-15I(P)
The overlay design allows for a decorative panel to cover the door trim for a seamless appearance that will complement surrounding cabinetry. You may also choose to match the handle hardware of surrounding cabinetry.
Refer to the charts for panel specifications.
MODEL UC-24BG
For model UC-24BG, the overlay door panel will consist of only a frame and will affix directly to the door with screws through a series of predrilled holes.
The glass area of the door is designed to be exposed to air circulation. Decorative overlays on the glass should be kept to a minimum. Do not install a solid panel on the glass door unit: this may cause moisture to form behind the panel. Refer to the charts for panel specifications.
IMPORTANT NOTE: The width of rails and stiles can be increased but should not exceed cabinet manufacturers’ standard widths or the overall panel dimensions. The back sides of rails and stiles that will be visible through the glass door will need to be finished along with the inside edges of the frame.
Door Clearance
MODELS UC-24R, UC-24BG AND UC-24C(I)
Undercounter models can be installed flush with surrounding cabinetry. Depending on the thickness of the overlay door panel, it may be necessary to install the unit so that it extends 1 /
4
" (6) beyond the front surface of surrounding cabinetry. This will prevent interference between the door panel and adjoining cabinetry up to a 145° door opening.
Refer to the full-scale template on page 83 of the wine storage section.
Panel Dimensions
UC-24R AND UC-24C(I)
Overlay Panel
UC-24BG
Overlay Panel
Rails and Stiles (min)
UC-15I(P)
Overlay Panel
Panel Requirements
MAX PANEL WEIGHT
UC-24R and UC-24C(I)
UC-24BG
UC-15I(P)
MIN PANEL THICKNESS
Overlay Panels
W
23 3 / 4 " (603)
W
23 3 /
4
" (603)
2 1 /
4
" (57)
W
15" (381)
H
30 1 / 16 " (764)
H
30 1 /
16
" (764)
H
30 3 /
8
" (772)
20 lbs (9 kg)
10 lbs (5 kg)
15 lbs (7 kg)
5 /
8
" (16)
Undercounter Refrigeration 90
Accessories
These optional accessories are available through your authorized Sub-Zero dealer. For local dealer information, visit the find a showroom section of our website, subzero.com.
• Stainless steel front panel with tubular or pro handle.
• Stainless steel tubular and pro handles to match the style of Wolf ovens and ranges.
• UL approved door lock.
STANDARD HANDLES
Refer to the chart below for standard handle lengths and the stud spacing of tubular and pro handles used on undercounter models.
Standard Handles
UNDERCOUNTER MODELS
Tubular Handle
Pro Handle
Length Stud Spacing
24 3 /
16
" (614) 16 1 /
4
" (413)
21" (533) 19 11 / 16 " (500)
Door Frame Profile
FULL-SCALE TEMPLATE
The full-scale template shows the door frame profile for model UC-24BG and the relationship to the overlay panel
(rails and stiles).
1" (25) 1" (25)
2 1 / 4 " (57) Rail / Stile
Glass
Door Panel Profile
DOOR FRAME PROFILE
MODEL UC-24BG
Undercounter Refrigeration
Wine Shelf Wood Facing
FULL-SCALE TEMPLATE
For models UC-24BG and UC-24C(I), follow dimensions in the full-scale template below if you choose to replace the natural cherrywood facing of the wine shelves with wood more complementary to your design and surrounding cabinetry.
19 1 / 2 " (495)
FRONT VIEW
WINE SHELF WOOD FACING
MODELS UC-24BG AND UC-24C(I)
7
/ 64 "
(3)
1 1 / 2 " (38)
27
/ 32 "
(21)
5 / 64 "
(2)
5
/ 8 "
(16)
Maximum Thickness
23
/ 64 "
(9)
9 / 16 " (14)
SIDE VIEW
91 subzero.com/specs
The information and images in this guide are the copyright property of Sub-Zero, Inc. Neither this guide nor any information or images contained herein may be copied or used in whole or in part without the express written permission of Sub-Zero, Inc. ©Sub-Zero, Inc. all rights reserved.
Wolf, Wolf & Design, Wolf Gourmet, W & Design and the color red as applied to knobs are registered trademarks and service marks of Wolf Appliance, Inc.
Sub-Zero, Sub-Zero & Design, Dual Refrigeration, Constant Care and The Living Kitchen are registered trademarks and service marks of Sub-Zero, Inc.
(collectively, the “Company Marks.”) All other trademarks or registered trademarks are property of their respective owners in the United States and other countries.
Sub-Zero Products Limited Warranty
FOR RESIDENTIAL USE ONLY
FULL TWO YEAR WARRANTY*
For two years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by
Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by
Sub-Zero, Inc. Service will be provided during normal business hours.
LIMITED TWELVE YEAR SEALED SYSTEM WARRANTY
For twelve years from the date of original installation, your Sub-Zero product warranty covers all parts to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of
Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact
Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820.
*Stainless steel doors, panels, handles, product frames and interior surfaces are covered by a limited 60-day parts and labor warranty for cosmetic defects.
*Replacement water filters and air purification cartridges are not covered by the product warranty.
Sub-Zero Outdoor Products Limited Warranty
PRODUCT MUST BE APPROVED FOR OUTDOOR USE, DESIGNATED BY MODEL AND SERIAL NUMBER
FOR RESIDENTIAL USE ONLY
FULL ONE YEAR WARRANTY*
For one year from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, any part of the product that proves to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by
Sub-Zero factory certified service, unless otherwise specified by Sub-Zero, Inc. Service will be provided during normal business hours.
FULL FIVE YEAR SEALED SYSTEM WARRANTY
For five years from the date of original installation, your Sub-Zero product warranty covers all parts and labor to repair or replace, under normal residential use, the compressor, condenser, evaporator, drier and all connecting tubing that prove to be defective in materials or workmanship. All service provided by Sub-Zero under the above warranty must be performed by Sub-Zero factory certified service, unless otherwise specified by
Sub-Zero, Inc. Service will be provided during normal business hours.
TERMS APPLICABLE TO EACH WARRANTY
The warranty applies only to products installed for normal residential use. The warranty applies only to products installed in any one of the fifty states of the United States, the District of Columbia or the ten provinces of
Canada. This warranty does not cover any parts or labor to correct any defect caused by negligence, accident or improper use, maintenance, installation, service or repair.
THE REMEDIES DESCRIBED ABOVE FOR EACH WARRANTY ARE THE ONLY ONES THAT SUB-ZERO, INC.
WILL PROVIDE, EITHER UNDER THIS WARRANTY OR UNDER ANY WARRANTY ARISING BY OPERATION OF
LAW. SUB-ZERO, INC. WILL NOT BE RESPONSIBLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES
ARISING FROM THE BREACH OF THIS WARRANTY OR ANY OTHER WARRANTY, WHETHER EXPRESS,
IMPLIED OR STATUTORY.
Some states do not allow the exclusion or limitation of incidental or consequential damages, so the above limitation or exclusion may not apply to you. This warranty gives you specific legal rights and you may also have other legal rights that vary from state to state.
To receive parts and/or service and the name of Sub-Zero factory certified service nearest you, contact
Sub-Zero, Inc., P. O. Box 44848, Madison, WI 53744; check the contact & support section of our website, subzero.com or call 800-222-7820.
*Stainless steel doors, panels, handles, product frames and interior surfaces are covered by a limited 60-day parts and labor warranty for cosmetic defects.
*Replacement water filters are not covered by the product warranty.
SUB-ZERO, INC.
P. O. BOX 44848 MADISON, WI 53744 SUBZERO.COM
800.222.7820
SZDG 2 / 2012
advertisement
* Your assessment is very important for improving the workof artificial intelligence, which forms the content of this project