Add a Safecom Pull Printer / Install 1. Print to the default printer

Add a Safecom Pull Printer / Install 1. Print to the default printer
1
Add a Safecom Pull Printer / Install
1. Print to the default printer “Safecom Printers”. The first time you send at file to print you will be receiving E-mail
with a PUK Code.
2. Write down the PUK Code and bring it with you so you can enter it when you are at the printer on the 3 floor
(Xerox ColorQube)
First time login with PUK code
1. Swipe your card.
2. Before 10 seconds has elapsed touch icon Pull Print
Note: If you touch an icon before you have used the card, a dialog saying Use card then touch OK will appear.
3. Enter OK (or press Start button to copy).
4. Enter PUK code as generated in your e-mail on the keypad or touch-screen.
5. Touch OK
6. Swipe your card again and Enter Pull Print again within 10 secound
Once you have entered the PUK code, you do not need the PUK code any longer.
Logout
There is a configurable Timeout that defaults to 30 seconds .The logout process is initiated if no buttons are touched for this period. To logout actively:
• Press Reset button.
• Touch Sign Out.
• Use card again (if a card reader is connected and you logged in by card).
On all other printers as Nybygg(HP 4250) , Olje og Gassen (HP 4350), 2 floor(HP P3005) Swipe your card and
all your documents will be printed if you have entered your puk code to the card!
2
Copy
Press the Start button or touch the COPY icon to copy the documents placed in the automatic document feeder
(PDF).
Logout
There is a configurable Timeout that defaults to 30 seconds. The logout process is initiated if no buttons are touched
for this period. To logout actively:
• Press Reset button.
• Touch Sign Out.
• Use card again (if a card reader is connected and you logged in by card).
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement