User manual | Nice Swing gates

Nice
Swing gates
The most complete and innovative
range to automate swing gates.
For Sliding Gates
For Garage Doors
Security
and Automation
Systems
For Rolling Doors
For Solar Screens
For Rolling Shutters
and For Awnings
Excellent reasons to choose Nice.
Simple and practical solutions
for any of automation.
Indoor
A comprehensive range
and compatible systems.
Nice offers a comprehensive range
of products: a wide range of systems
and products for the automation of gates,
garages, shutters, barriers, awnings,
shutters and now also alarm systems.
All products are compatible with one another
and easily integrated with existing systems.
For Lighting Systems
and For Irrigation Systems
Road Barriers
For Swing Gates
Outdoor
Design
Today, Nice products are exhibited
in design and applied art museums,
and were presented with an
awards at the XIX Compasso
d’Oro, the most important
international event
in the design field.
Increasingly innovative.
The NRC systems and Nice Solemyo make installation
of all automations both simple and economic,
in new and restored buildings alike.
Opera and BlueBUS simplify the installation,
the programming and use of each automation.
Solemyo is the kit for solar
power for the automation
of gates, garage doors
and barrier gates.
Installable anywhere without
the need for connections
or excavations, even in the most
remote locations or those difficult
to access with the power mains.
Increased savings and respect
for the environmen thanks
to solar energy, free and clean:
an ecological and intelligent
choice with short term benefits.
SYKCE
The kit contains the photovoltaic
panel SYP that converts sunlight
into electricity and the battery box
PSY24 storing the electrical energy
produced by the panel, with
continuous and permanent
supply throughout the day.
4
The NRC systems
(Nice Radio Connection),
avoiding the cost effort
of building work or the installation
of unsightly ducting for routing
control cables make the
installation of any automation
much simpler and economical,
in new buildings, and all renovated
constructions.
Opera marks the future
of the automation.
The innovative system
Nice Opera makes the work
for the installer easier thanks
to the remote control of any
automation system via PC
and PDA, while customers
can manage home automation
via Bluetooth, GSM o GPRS.
Easy and quick installations,
just two wires without polarity!
With Nice’s revolutionary
BlueBUS system far fewer
connections are required,
which means incredible
time savings: just two wires,
which carry both the
communication signals
and the power supply!
With BlueBUS you don’t
need to observe any polarity,
therefore any related risk factor
is eliminated.
5
Selection guide
Follow the arrow and choose the right product
Surface mounted,
also available in kit
24 Vdc version with magnetic encoder,
irreversible, with mechanical stop on opening.
Compatible with control units with BlueBUS
technology, Solemyo and Opera
TO4024
Kit
for leaves
up to 3 m
irreversible
230 Vac
high
speed
with limit switch on opening
TO4005
with limit switch on opening and closing
TO4006
low speed, with limit switch on opening
reversible, high speed, with limit switch on opening
TO5024
for intensive use
for leaves
up to 5 m
irreversible, low speed
230 Vac
reversible, high speed
for leaves
up to 7 m
TO4015
TO4605
24 Vdc version with magnetic encoder,
irreversible, with mechanical stop on opening.
Compatible with control units with BlueBUS
technology, Solemyo and Opera
Toona
ToonaKit
pages 8/11
TOONAKCE
TO5024I
with limit switch on opening
TO5015
with limit switch on opening and closing
TO5016
with limit switch on opening
TO5605
24 Vdc version with magnetic encoder,
irreversible, with mechanical stop on opening.
Compatible with control units with BlueBUS
technology, Solemyo and Opera
TO7024
for leaves up to 2 m
WINGOKCE
230 Vac
for leaves up to 3.5 m
WingoKit
pages 12/15
24 Vdc, irreversible, high speed.
Compatible for operation with Solemyo
WINGO5KCE
for leaves up to 2 m
WINGO4024KCE
for leaves up to 3.5 m
WINGO5024KCE
for 1 leaf
WALKY1024KCE
for 2 leaves
WALKY2024KCE
Surface mounted, with articulated arm,
recommended for small posts, in kit
For leaves up to 1.8 m, 24 Vdc
irreversible with built-in control unit
equipped with BlueBUS technology,
compatible for operation
with Solemyo and Opera.
Mechanical limit switch on closing.
WalkyKit
pages 16/17
6
Surface mounted, articulated arm,
also for large size posts and lightweight structures,
also available in kit
For leaves up to 2 m
24 Vdc, irreversible.
Control units compatible
with Solemyo.
With limit switch on opening.
Pop
PopKit
pages 18/19
with built-in control unit
PP7024
without control unit
PP7224
Kit
POPKCE
Surface mounted, articulated arm,
for large size posts
For leaves up to 3 m,
irreversible.
Hyppo
page 20
230 Vac with limit switch on opening and closing
HY7005
24 Vdc version with magnetic encoder.
Compatible with control units with BlueBUS
technology, Solemyo and Opera
HY7024
Underground installation, ultra compact,
in kit
For leaves up to 2.3 m, 24 Vdc
irreversible, mechanical limit switches
on opening and closing.
X-MetroKit
pages 21/22
control unit compatible with Solemyo
XMETRO2024KCE
with magnetic encoder, control unit equipped with BlueBUS technology,
compatible for operation with Solemyo and Opera
XMETRO2124KCE
Underground installation
For leaves up to 3.5 m,
irreversible.
Metroplex
page 23
24 Vdc version with magnetic encoder.
Compatible with control units with BlueBUS
technology, Solemyo and Opera
230 Vac
grease lubrication
oil bath lubrication
ME3024
high speed
ME3000
low speed
ME3000L
high speed
ME3010
7
Toona 4
For swing gates with leaves
up to 3 m.
Electromechanical gear motor,
surface mounted.
Also available in 24 Vdc version,
with magnetic encoder.
Ideal for residential use.
Easy access to internal
parts in upper section
of motor
New third generation models:
quality and durability thanks to the housing,
made up of two tough aluminium shells
with polyester paint finish; more resistant
to atmospheric agents.
Release handle
in die-cast aluminium,
practical and resistant
Internal moving parts completely in steel,
light alloys and technopolymers.
Reliable and silent:
patented layout or internal parts.
Lead nut in bronze
for strength and silent operation.
Exclusive patented
layout of internal parts
Generously sized and practical connection
compartment: rapid and easy access
from above to internal parts located
in the upper section of the motor.
Simple installation and maintenance;
with built-in capacitor.
Total interchangeability with the series
Moby: identical positions and fixing brackets.
Recommended control units:
Mindy A3, A3F, A6, A6F, A60, A700F;
for TO4024 Moonclever MC824H.
Technical specifications
Code
TO4024
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
TO4005
TO4006
24
5
120
-
TO4015
TO4605
230
1.5
340
1.3
300
7
0.016
0.013
0,016
54
50
1800
95*
58
44
-20 ÷ +50
820x115x105 h
6
24 Vdc version with magnetic encoder.
Perfect for intensive use, compatible
with the control unit Moonclever MC824H,
equipped with BlueBUS, and provision
for operation with the systems Solemyo
and Opera:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
* With optimal installation.
Installation diagram
Utilisation limits
5
500
7
450
8
Max. gate weight (kg)
9
400
4
6
1
10
300
250
200
2
2
1. Toona 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
8
350
3
2.5
3
Max. gate length (m)
The shape, the height of the gate and the weather conditions can
considerably reduce the values shown in the graph to the side.
Use in windy areas 230 Vac models.
Toona 5
For swing gates with leaves
up to 5 m.
Electromechanical gear motor,
surface mounted.
Also available in 24 Vdc version,
with magnetic encoder.
Ideal for residential and industrial use.
Easy access to internal
parts in upper section
of motor
New third generation models:
quality and durability thanks to the housing,
made up of two tough aluminium shells
with polyester paint finish; more resistant
to atmospheric agents.
Release handle
in die-cast aluminium,
practical and resistant
Internal moving parts completely in steel,
light alloys and technopolymers.
Reliable and silent:
patented layout or internal parts.
Lead nut in bronze
for strength and silent operation.
Exclusive patented
layout of internal parts
Generously sized and practical connection
compartment: rapid and easy access
from above to internal parts located
in the upper section of the motor.
Simple installation and maintenance,
with built-in capacitor.
Total interchangeability with the series
Moby: identical positions and fixing brackets.
TO5024I ideal for intensive work load,
thanks to the torque of 2200 Nm, can work
on continuous duty on large sized gates.
Technical specifications
Code
TO5024
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
TO5024I
TO5015
24
5
120
-
TO5016
TO5605
230
-
Recommended control units:
Mindy A3, A3F, A6, A6F, A60, A700F;
for TO5024 and TO5024I Moonclever MC824H.
* With optimal installation.
** The reduction in number of manoeuvres with respect to the version TO5024 depends solely on the lower manoeuvre speed.
24 Vdc version with magnetic encoder.
Perfect for intensive use, compatible with the
control unit Moonclever MC824H, equipped
with BlueBUS, and provision for operation
with the systems Solemyo and Opera:
• simple programming, by means of a single key;
• self-learning of opening and closing limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
Installation diagram
Utilisation limits
0.016
1800
95*
1.5
340
1.3
300
7
0.013*
0.016
2200
75**
1800
54
50
44
-20 ÷ +50
965x115x105 h
7
5
600
550
7
500
8
450
Max. gate weight (kg)
9
TO5024I
4
6
1
Approximate draft.
10
400
350
300
250
200
2
2
1. Toona 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
3
2,5
3
3,5
4
4,5
5
Max. gate length (m)
The shape, the height of the gate and the weather conditions can
considerably reduce the values shown in the graph to the side.
Use in windy areas 230 Vac models.
9
Toona 7
For swing gates with leaves
up to 7 m.
Electromechanical gear motor,
surface mounted, powered
at 24 Vdc, with magnetic encoder.
Ideal for industrial installations,
designed for intensive use.
Easy access to internal
parts in upper section
of motor
Release handle
in die-cast aluminium,
practical and resistant
Compatible for operation with Solemyo
and Opera systems.
Tougher housing shell,
made up of two
sturdy shells
New third generation models:
quality and durability thanks to the housing,
made up of two tough aluminium shells
with polyester paint finish; more resistant
to atmospheric agents.
Internal moving parts completely in steel,
light alloys and technopolymers.
Reliable and silent:
patented layout or internal parts.
Lead nut in bronze
for strength and silent operation.
Exclusive patented
layout of internal parts
Generously sized and practical connection
compartment: rapid and easy access
from above to internal parts located
in the upper section of the motor.
Control unit Moonclever MC824H,
with BlueBUS technology:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
Technical specifications
Code
TO7024
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
24
5
120
0.013
2700
41
44
-20 ÷ +50
1200x128x150 h
15
Installation diagram
Utilisation limits
5
1700
7
1500
8
4
1300
Max. gate weight (kg)
9
6
1
10
900
700
3
2
1. Toona 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
10
1100
3
4
5
6
7
Max. gate length (m)
The shape, the height of the gate and the weather conditions can
considerably reduce the values shown in the graph to the side.
ToonaKit
For swing gates with leaves
up to 3 m, ideal for residential use.
Electromechanical gear motor,
surface mounted, powered
at 24 Vdc, with magnetic encoder.
TO4024
Easy access to internal
parts in upper section
of motor
Release handle
in die-cast aluminium,
practical and resistant
Compatible for operation with Solemyo
and Opera systems.
New third generation models:
quality and durability thanks to the housing,
made up of two tough aluminium shells
with polyester paint finish; more resistant
to atmospheric agents.
Internal moving parts completely in steel,
light alloys and technopolymers.
Exclusive patented
layout of internal parts
ON2
MC824H
MOFB
Reliable and silent:
patented layout or internal parts.
MOSE
MLBT
TS
Lead nut in bronze for strength
and silent operation.
Generously sized and practical
connection compartment:
rapid and easy access from above
to internal parts located in the upper section
of the motor.
The kit contains:
TO4024 2 electromechanical irreversible gear motors, surface mounted. With mechanical stop on opening.
ON2 1 transmitter 433.92 MHz, 2 channels. MC824H 1 control unit with OXI plug-in receiver.
MOFB 1 couple of external photocells designed for connection by Nice BlueBUS.
MOSE 1 key selector switch for outdoor installation. MLBT 1 flashing light with integrated aerial.
TS 1 signboard.
Technical specifications
Code
TO4024
Electrical data
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
24
5
120
0.016
1800
95*
Ease of installation and maintenance.
Total interchangeability with the series
Moby: identical positions and fixing brackets.
Control unit Moonclever MC824H,
with BlueBUS technology:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
44
-20 ÷ +50
820x115x105 h
6
* With optimal installation.
Installation diagram
Utilisation limits
5
500
7
450
8
400
4
Max. gate weight (kg)
9
6
1
Approximate draft.
10
350
300
250
200
2
2
1. Toona 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
3
2.5
3
Max. gate length (m)
The shape, the height of the gate and the weather conditions can
considerably reduce the values shown in the graph to the side.
Use in windy areas 230 Vac models.
11
WingoKit
For swing gates with leaves
up to 2 m, surface mounted.
WG4000
User-friendly release
with personalised Nice key
or standard lock (optional)
Patented layout of the internal components:
fewer moving parts means greater
reliability and quiet operation.
Easy to install: after the gear motor has
been assembled, all electrical connections
are made from above.
Built-in capacitor.
User-friendly release with personalised
Nice key or standard lock (optional).
Exclusive, patented layout
of the internal components
Pre-assembled, travel stops PLA13
on opening.
A400 control unit:
for 2 motors, microprocessor logic,
with obstacle detection system, IP55 case.
Only for Wingo.
FLO2R-S
A400
MOF
MOSE
MLT
PLA13
TS
The kit contains:
WG4000 2 surface-mounted electromechanical gear motors, with Nice key release.
FLO2R-S 1 transmitter 433.92 MHz, 2 channels. A400 1 control unit A400 with SMXI plug-in receiver.
MOF 1 pair of photocells for outdoor installation. MOSE 1 key selector switch for outdoor installation.
MLT 1 flashing light with integrated aerial. PLA13 2 travel stops for opening manoeuvres. TS 1 signboard.
Technical specifications
Code
WG4000
Electrical data
Power supply (Vac 50 Hz)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
230
1.5
200
5
0.016
1500
30
44
-20 ÷ +50
770x98x95 h
6
Installation diagram
Utilisation limits
5
7
400
Max. gate weight (kg)
4
6
1
300
200
100
1
2
3
1. Wingo 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit 7. Digital or key switches.
12
1,5
Max. gate length (m)
2
WingoKit 4024
For swing gates with leaves
up to 2 m, surface mounted.
24 Vdc electromechanical
gear motor.
WG4024
User-friendly release
with personalised Nice key
or standard lock (optional)
Compatible for operation with Solemyo
system.
Patented layout of the internal components:
fewer moving parts means greater reliability
and quiet operation.
Easy to install: after the gear motor
has been assembled, all electrical connections
are made from above.
Exclusive, patented layout
of the internal components
User-friendly release with personalised
Nice key or standard lock (optional).
Pre-assembled, travel stops PLA13
on opening.
FLO2R-S
MC424
MOF
MOSE
ML24T
PLA13
TS
The kit contains:
WG4024 2 surface-mounted electromechanical gear motors, with Nice key release.
FLO2R-S 1 transmitter 433.92 MHz, 2 channels. MC424 1 control unit with SMXI plug-in receiver.
MOF 1 pair of photocells for outdoor installation. MOSE 1 key selector switch for outdoor installation.
ML24T 1 flashing light with integrated aerial. PLA13 2 travel stops for opening manoeuvres.TS 1 signboard.
Technical specifications
Code
New Moonclever control unit MC424:
• simple programming, by means of a single key;
• clutch with anti-crush safety feature;
• automatic memorization of limit switches
on opening and closing with self-learning
function;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection system;
• can be linked to the 8.2 KOhm
resistive sensitive edge;
• continues to work even during power
failures using optional (PS124) batteries
that fit inside the control unit.
WG4024
Electrical data
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
24
3.5
85
0.018
1500
30
44
-20 ÷ +50
770x98x95 h
17
Installation diagram
Utilisation limits
5
7
400
8
4
Max. gate weight (kg)
9
6
1
300
200
100
Approximate draft.
1
2
3
1,5
2
Max. gate length (m)
1. Wingo 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box.
*Optional connection to Solemyo system.
13
Wingo5Kit
For swing gates with leaves
up to 3.5 m, surface mounted.
WG5000
Patented layout of the internal components:
fewer moving parts means greater
reliability and quiet operation.
User-friendly release
with personalised Nice key
or standard lock (optional)
Easy to install: after the gear motor has
been assembled, all electrical connections
are made from above.
Built-in capacitor.
User-friendly release with personalised
Nice key or standard lock (optional).
Pre-assembled, travel stops PLA13
on opening.
Exclusive, patented layout
of the internal components
A60 control unit:
for two 230 Vac motors with electronic
clutch and slowdown, IP55 casing.
FLO2R-S
A60
MOF
MOSE
MLT
PLA13
TS
The kit contains:
WG5000 2 surface-mounted electromechanical gear motors, with Nice key release.
FLO2R-S 1 transmitter 433.92 MHz, 2 channels. A60 1 control unit A60 with SMXI plug-in receiver.
MOF 1 pair of photocells for outdoor installation. MOSE 1 key selector switch for outdoor installation.
MLT 1 flashing light with integrated aerial. PLA13 2 travel stops for opening manoeuvres. TS 1 signboard.
Technical specifications
Code
WG5000
Electrical data
Power supply (Vac 50 Hz)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
230
1.5
200
5
0.013
1700
30
44
-20 ÷ +50
920x98x95 h
6
Installation diagram
Utilisation limits
5
7
500
4
400
6
2
3
Max. gate weight (kg)
1
300
200
100
1
1. Wingo 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit 7. Digital or key switches.
14
1,5
Max. gate length (m)
2
2,5
3
3,5
WingoKit 5024
For swing gates with leaves
up to 3.5 m, surface mounted.
24 Vdc electromechanical
gear motor.
WG5024
User-friendly release
with personalised Nice key
or standard lock (optional)
Compatible for operation with Solemyo
system.
Patented layout of the internal components:
fewer moving parts means greater reliability
and quiet operation.
Easy to install: after the gear motor
has been assembled, all electrical connections
are made from above.
Exclusive, patented layout
of the internal components
User-friendly release with personalised
Nice key or standard lock (optional).
Pre-assembled, travel stops PLA13
on opening.
FLO2R-S
MC424
MOF
MOSE
ML24T
PLA13
TS
The kit contains:
WG5024 2 surface-mounted electromechanical gear motors, with Nice key release.
FLO2R-S 1 transmitter 433.92 MHz, 2 channels. MC424 1 control unit with SMXI plug-in receiver.
MOF 1 pair of photocells for outdoor installation. MOSE 1 key selector switch for outdoor installation.
ML24T 1 flashing light with integrated aerial. PLA13 2 travel stops for opening manoeuvres. TS 1 signboard.
Technical specifications
Code
New Moonclever control unit MC424:
• simple programming, by means of a single key;
• clutch with anti-crush safety feature;
• automatic memorization of limit switches
on opening and closing with self-learning
function;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection system;
• can be linked to the 8.2 KOhm
resistive sensitive edge;
• continues to work even during power
failures using optional (PS124) batteries
that fit inside the control unit.
WG5024
Electrical data
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (m/s)
Force (N)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
24
3.5
85
0.016
1500
30
44
-20 ÷ +50
920x98x95 h
18
Installation diagram
Utilisation limits
5
7
500
8
9
4
6
400
2
1. Wingo 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box.
*Optional connection to Solemyo system.
3
Max. gate weight (kg)
Approximate draft.
1
300
200
100
1
1,5
2
2,5
3
3,5
Max. gate length (m)
15
WalkyKit 1024
For swing gates with leaves
up to 1.8 m.
Especially suited to gates
in wood or PVC.
Irreversible electromechanical
gear motor at 24 Vdc, with articulated
arm, Nice BlueBUS technology.
WL1024C
Integrated arm with
anti-shear protection
and mechanical
limit stop on closure
Compatible for operation with Solemyo
and Opera systems.
Ultra compact: ideal for pedestrian gates,
recommended for small posts (width 10 cm).
Safe: thanks to the irreversible motor
and anti-shear arm with built-in mechanical stop
on closure (with installation of entire arm).
ON2
Practical: the articulated arm enables
installation in specific conditions,
such as in the presence of small walls
or obstacles adjacent to the post.
Built-in control unit
with provision
for battery housing
TS
Quick: no waiting in front of the gate,
just 7 seconds to open or close
(in optimal installation conditions,
with reduced arm and 90° opening).
The kit contains:
Convenient: incorporable flashing Led indicator,
with courtesy light function (WLT, optional);
rapid motor release for manual movement
of the gate.
WL1024C 1 electromechanical gear motor, surface mounted,
with built-in control unit and OXI plug-in receiver.
ON2 1 transmitter 433.92 MHz, 2 channels. TS 1 signboard.
Control unit with BlueBUS technology:
• simple programming;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• provision for connection of latest generation
resistive sensitive edges.
Technical specifications
Code
WL1024C
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
230
0.8
120
-
No black out: operation in the event
of a power failure by means of optional
batteries (PS424) housed inside the motor.
1.7 - 2.5
100
50
44
-20° ÷ +50°
90x125x385 h
4.8
Installation diagram
Utilisation limits
9
5
Entire arm
1
6
min 300 mm
A
Reduced arm
7
B
180
4
160
2
3
Max. gate weight (kg)
140
8
min 100
120
100
min 80 mm
80
60
40
B
20
0,8
1. Walky 2. Transmitter 3. Photocells mounted on posts 4. Photocells
5. Flashing light 6. Digital or key switches 7. SYP* solar panel 8. PSY24* battery box
9. O-View* multifunction display. *Optional connection to Solemyo and Opera systems.
16
A
1
1,2
Max. gate length (m)
1,5
1,6
1,8
min 100
WalkyKit 2024
For 2-leaf swing gates
with leaves up to 1.8 m.
Especially suited to gates
in wood or PVC.
Irreversible electromechanical
gear motor at 24 Vdc, with articulated
arm, Nice BlueBUS technology.
WL1024C + WL1024
Incorporable flashing
Led indicator with
courtesy light
function
Compatible for operation with Solemyo
and Opera systems.
Ultra compact: ideal for pedestrian gates,
recommended for small posts (width 10 cm).
ON2
MOFB
Safe: thanks to the irreversible motor
and anti-shear arm with built-in mechanical stop
on closure (with installation of entire arm).
Integrated arm
with anti-shear protection
and mechanical
limit stop on closure
Built-in control unit
with provision
for battery housing
MOSE
WLT
Practical: the articulated arm enables
installation in specific conditions,
such as in the presence of small walls
or obstacles adjacent to the post.
TS
Quick: no waiting in front of the gate,
just 7 seconds to open or close
(in optimal installation conditions,
with reduced arm and 90° opening).
The kit contains:
Convenient: incorporable flashing Led indicator,
with courtesy light function (WLT, optional);
rapid motor release for manual movement
of the gate.
WL1024C + WL1024 2 electromechanical gear motors, surface mounted.
WL1024C (with control unit and OXI plug-in receiver), WL1024 (without control unit).
ON2 1 transmitter 433.92 MHz, 2 channels. MOFB 1 couple of external photocells designed for connection
by Nice BlueBUS. MOSE 1 key selector switch for outdoor installation. WLT 1 flashing light. TS 1 signboard.
Control unit with BlueBUS technology:
• simple programming;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• provision for connection of latest generation
resistive sensitive edges.
Technical specifications
Code
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
WL1024C
WL1024
230
0.8
120
24
2
30
No black out: operation in the event
of a power failure by means of optional
batteries (PS424) housed inside the motor.
1.7 - 2.5
100
50
44
-20° ÷ +50°
90x125x385 h
4.8
4.3
Installation diagram
Utilisation limits
9
1
5
Entire arm
6
min 300 mm
A
Reduced arm
7
B
180
4
160
Approximate draft.
2
3
Max. gate weight (kg)
140
8
min 100
120
100
min 80 mm
80
60
40
B
20
0,8
1. Walky 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Digital
or key switches 7. SYP* solar panel 8. PSY24* battery box 9. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
A
1
1,2
Max. gate length (m)
1,5
1,6
1,8
min 100
17
Pop
For swing gates with leaves
max. 2 m, and those versions
with large pillars and lightweight
structures, ideal for one leaf
pedestrian gates.
Electromechanical gear motor
irreversible 24 Vdc with articulated arm,
surface mounted.
Incorporated
control unit
Compatible for operation with Solemyo
system.
Compact body
with aluminium base
Two irreversible 24 Vdc versions
complete with limit switch on opening
either without control unit (PP7224)
or with incorporated control unit (PP7024).
User-friendly: release with personalised
Nice key designed for cord-type release.
Sturdy,
anti-shearing arm
Sophisticated electronics: slowdown,
obstacle detection system, can be linked
to the 8.2 KOhm resistive sensitive edge.
Easy to install: no welding.
Compact: 167 mm in width,
ideal for any kind of post.
Always ready for use: continues to work
even during power failures using optional
(PS124) batteries that fit inside the motor.
Powerful: thanks to the 180 Nm torque.
Small shockproof body
with aluminium base.
Technical specifications
Code
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
PP7024
PP7224*
230
1
24
3
Perfect for intensive use:
• easy programming by pressing a single button;
• clutch with anti-crush safety feature;
• automatic memorization of limit switches
on opening and closing with self-learning
function;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing.
75
1.68
180
80
44
-20 ÷ +50
167x254x315 h
10
* Version without control unit.
Installation diagram
Utilisation limits
5
250
7
6
4
1
Max. gate weight (kg)
Max. 250 mm
8
Max.
Min. 500 mm (90°)
2
1. Pop 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light
6. Digital or key switches 7. SYP* solar panel 8. PSY24* battery box.
*Optional connection to Solemyo system.
18
3
200
1
1,5
Max. gate length (m)
The shape, the height of the gate
and the weather conditions can
considerably reduce the values shown
in the graph to the side.
2
PopKit
For swing gates with leaves
up to 2 m, also with large posts
and lightweight structures.
P7024 + PP7224
Compatible for operation with Solemyo
system.
Sophisticated electronics: slowdown,
obstacle detection system, can be linked
to the 8.2 KOhm resistive sensitive edge.
User-friendly: release with personalised
key designed.
Sturdy, aluminium, anti-shearing arm.
Powerful: thanks to the 180 Nm torque.
Always ready for use: continues to work
even during power failures using optional
(PS124) batteries that fit inside the motor.
ON2
MOF
Exclusive functions: photo-test,
programmable input for functions such
as open, close, photo2, open pedestrian
and open partially.
ML24T
Small shockproof body
with aluminium base.
The kit contains:
PP7024 + PP7224 2 surface-mounted electromechanical gear motors, PP7024 (with incorporated control unit
and OXI plug-in receiver), PP7224 (without control unit). ON2 1 transmitter 433.92 MHz, 2 channels.
MOF 1 pair of photocells for outdoor installation. ML24T 1 flashing light with integrated aerial.
Technical specifications
Code
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
PP7024
PP7224*
230
1
24
3
75
1.68
180
80
44
-20 ÷ +50
167x254x315 h
10
* Version without control unit.
Installation diagram
Utilisation limits
5
250
7
6
4
1
Max. gate weight (kg)
Max. 250 mm
8
Max.
Min. 500 mm (90°)
Approximate draft.
2
1. Pop 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light
6. Digital or key switches 7. SYP* solar panel 8. PSY24* battery box.
*Optional connection to Solemyo system.
3
200
1
1,5
2
Max. gate length (m)
The shape, the height of the gate
and the weather conditions can
considerably reduce the values shown
in the graph to the side.
19
Hyppo 7000
For swing gates with leaves
up to 3 m, also with large pillars.
Electromechanical gear motor,
surface mounted, also in 24 Vdc
version with magnetic encoder,
with articulated arm.
Die-cast, aluminium, key-operated
unlock system, complete
with protected key.
Designed to accommodate
external release, too
Single model for right and left leaves.
Two irreversible versions, with 230 Vac (HY7005)
and 24 Vdc (HY7024) power supplies
with magnetic encoder.
Fewer connections mean quicker installation.
Pre-wired, incorporated double limit-switch
both during opening and closing (HY7005).
Easy to install: nothing welded to the gates.
Long-lasting: solid metal mechanics.
Compact: shockproof bodywork
with no sharp corners.
Recommended control units:
Mindy A3, A3F, A6, A6F, A60, A700F;
for HY7024 Moonclever MC824H.
24 Vdc version with magnetic encoder.
Perfect for intensive use, compatible
with the control unit Moonclever MC824H,
equipped with BlueBUS, and provision
for operation with the systems Solemyo
and Opera:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
Sturdy, anti-shearing arm,
galvanised and painted;
strengthened in those areas
subjected to greater mechanical
stress
Technical specifications
Code
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (%)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
HY7024
HY7005
24
5
120
-
230
1.2
250
10
2
250
80
1.7
400
30
43
-20 ÷ +50
350x165x242 h
13
Installation diagram
Utilisation limits
5
800
7
A
D
Max. gate weight (kg)
8
4
9
1
6
B
600
500
HY7005
400
300
200
HY7005 / HY7024
2
2,5
Max. gate length (m)
10
2
1. Hyppo 2. Transmitter 3. Photocells mounted on posts 4. Photocells
5. Flashing light 6. Control unit 7. Digital or key switches 8. SYP* solar panel
9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
20
700
3
Standard
HYA12
A max
150
400
B max
350
450
D max
450
800
N.B. The above values are valid if the motor
is used with standard accessories.
The shape, the height of the gate and the weather
conditions can considerably reduce the values
shown in the graph to the side.
Use in windy areas 230 Vac models.
3
X-MetroKit 2024
For swing gates with leaves
up to 2.3 m, underground
installation, ultra compact.
New irreversible electromechanical
24 Vdc gear motor.
XME2024
Compatible for operation with Solemyo
system.
Tough and discreet: compact foundation
box with a height of only 81 mm.
Steel with cataphoresis paint finish
guarantees optimal resistance to corrosion,
and thickness of 2.5 mm guarantees strength.
All this in a protrusion of just 52 mm
from the ground.
Practical and quick installation
thanks to the exit lever on the gear motor
attached directly on the leaf.
ON2
MC424
MOF
MOSE
ML24T
TS
Mechanical limit switches
adjustable on opening and closing.
Standard opening up to 180°
with no accessory.
The kit contains:
XME2024 2 gear motors. XMBOX 2 foundation boxes. ON2 1 transmitter 433.92 MHz, 2 channels.
MC424 1 control unit with OXI plug-in receiver. MOF 1 pair of photocells for outdoor installation.
MOSE 1 key selector switch for outdoor installation. ML24T 1 flashing light with integrated aerial. TS 1 signboard.
XME2024
Electrical data
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
Practical release from inside and outside,
acting directly on the gear motor, easy to
operate by means of the special key.
New Moonclever control unit MC424:
• easy programming by pressing a single button;
• clutch with anti-crush safety feature;
• automatic memorization of limit switches
on opening and closing with self-learning
function;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection;
• provision for connection of latest
generation resistive sensitive edges;
• continues to work even during power
failures using optional (PS124) batteries
that fit inside the control unit.
Technical specifications
Code
Reliable and sturdy: the gear motor,
in IP67 pressure die cast aluminium,
suspended inside the housing to enable
drainage of any deposits, ensures optimal
water resistance.
24
5
120
1.25
250
60
67
-20° ÷ +50°
230x206x88 h
15
Installation diagram
Utilisation limits
5
8
Max. gate weight (kg)
7
4
9
6
1
400
300
200
1.5
2
2.3
Approximate draft.
Max. gate length (m)
2
1. X-Metro 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light
6. Control unit 7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box.
*Optional connection to Solemyo system.
3
The shape, the height of the gate and the weather
conditions can considerably reduce the values shown
in the graph to the side.
21
X-MetroKit 2124
For swing gates with leaves
up to 2.3 m, underground
installation, ultra compact.
New irreversible electromechanical
gear motor 24 Vdc with magnetic
encoder.
XME2124
Compatible for operation with Solemyo
and Opera systems.
Tough and discreet: compact foundation
box with a height of only 81 mm.
Steel with cataphoresis paint finish
guarantees optimal resistance to corrosion,
and thickness of 2.5 mm guarantees strength.
All this in a protrusion of just 52 mm
from the ground.
ON2
MC824H
MOFB
MOSE
MLBT
TS
Practical and quick installation
thanks to the exit lever on the gear motor
attached directly on the leaf.
Mechanical limit switches
adjustable on opening and closing.
Standard opening up to 180°
with no accessory.
The kit contains:
XME2124 2 gear motors. XMBOX 2 foundation boxes. ON2 1 transmitter 433.92 MHz, 2 channels.
MC824H 1 control unit with OXI plug-in receiver. MOFB 1 couple of external photocells
designed for connection by Nice BlueBUS. MOSE 1 key selector switch for outdoor installation.
MLBT 1 flashing light with integrated aerial. TS 1 signboard.
Technical specifications
Code
Practical release from inside and outside,
acting directly on the gear motor, easy to
operate by means of the special key.
Control unit Moonclever MC824H,
with BlueBUS technology:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
XME2124
Electrical data
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (cycles/hour)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
Reliable and sturdy: the gear motor,
in IP67 pressure die cast aluminium,
suspended inside the housing to enable
drainage of any deposits, ensures optimal
water resistance.
24
5
120
1.25
250
60
67
-20° ÷ +50°
230x206x88 h
15
Installation diagram
Utilisation limits
5
8
Max. gate weight (kg)
7
4
9
6
1
400
300
200
1.5
10
2
1. X-Metro 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
22
2
2.3
Max. gate length (m)
3
The shape, the height of the gate and the weather
conditions can considerably reduce the values shown
in the graph to the side.
Metroplex
For swing gates with leaves
up to 3.5 m, underground
installation.
Irreversible electromechanical
gear motor, also available in 24 Vdc
versions with magnetic encoder.
New motor for more
reliability and resistance
An even more evolved range: 4 types
of electromechanical gear motors irreversible,
Metroplex, also available in 24 Vdc
version with magnetic encoder.
Metro Box, 2 new foundation boxes
externally chamfered, with mechanical stop
on opening: in STAINLESS STEEL (MECX),
ideal for use in extreme conditions,
and with the new cataphoresis paint finish
(MECF), highly resistant to corrosion.
Reliable and resistant: motors made up
of solid internal parts in metal and bronze alloy.
New IP67 waterproof die cast aluminium.
Total freedom of choice: release from inside
and outside, two key-operated models
or freely compatible lever version and easily
activated with just one hand.
Brand new models
of externally chamfered
Metro Box
Simple to use: mechanical stop system
on closure. Standard opening max. 110°,
optional opening 360°.
Waterproof, with IP67
protection rating
Totally compatible with the previous
Metro series.
Recommended control units:
Mindy A3, A3F, A6, A6F, A60, A700F;
for ME3024 Moonclever MC824H.
Technical specifications
Code
ME3024
Electrical data
Power supply (Vac 50 Hz)
Power supply (Vdc)
Absorption (A)
Power (W)
Built-in capacitor (μF)
Performance data
Speed (Rpm)
Torque (Nm)
Work cycle (%)
Dimensional and general data
Protection level (IP)
Working temp. (°C Min/Max)
Dimensions (mm)
Weight (kg)
24
5
120
1.4
250
80
ME3000
ME3000L
1.2
250
230
1.3
300
ME3010
1.4
290
12
10
1.14
300
0.8
250
1.14
300
40
30
67
-20 ÷ +50
390x322x194.5 h
11
11.5
Installation diagram
24 Vdc version with magnetic encoder.
Perfect for intensive use, compatible
with the control unit Moonclever MC824H,
equipped with BlueBUS, and provision
for operation with the systems Solemyo
and Opera:
• simple programming, by means of a single key;
• self-learning of opening and closing
limit positions;
• automatic fault diagnostics;
• programming of pause time;
• pedestrian pass door;
• deceleration on opening and closing;
• obstacle detection with dual technology;
• operation in event of power failure by means
of optional rechargeable batteries (PS324);
• provision for connection of latest
generation resistive sensitive edges.
Utilisation limits
5
8
600
Max. gate weight (kg)
7
4
9
6
1
500
400
300
2,5
3
3,5
Approximate draft.
10
Max. gate length (m)
2
1. Metroplex 2. Transmitter 3. Photocells mounted on posts 4. Photocells 5. Flashing light 6. Control unit
7. Digital or key switches 8. SYP* solar panel 9. PSY24* battery box 10. O-View* multifunction display.
*Optional connection to Solemyo and Opera systems.
3
The shape, the height of the gate and the weather
conditions can considerably reduce the values shown
in the graph to the side. Use in windy areas 230 Vac models.
23
To complete your automation:
Accessories for Toona
Toona 4*
Code
Description
PLA6
PLA14
PLA15
PLA10
Rear bracket 250 mm long
Screw-adjustable rear bracket
Screw-adjustable front bracket
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
2
2
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
TS
Mechanical travel stops for closing and opening manoeuvres
Signboard
4
1
* Total interchangeability with the series Moby: identical positions and fixing brackets
Toona 5*
Code
Description
PLA6
PLA8
PLA10
Rear bracket 250 mm long
Screw-adjustable front bracket
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
TS
Mechanical travel stops for closing and opening manoeuvres
Signboard
4
1
* Total interchangeability with the series Moby: identical positions and fixing brackets
Toona 7
Code
Description
PLA10
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
TS
Signboard
1
Code
Description
Pc/Pack
PLA6
PLA14
PLA15
PLA10
Rear bracket 250 mm long
Screw-adjustable rear bracket
Screw-adjustable front bracket
Vertical 12 V electric lock
(required for gates longer than 3 m)
1
2
2
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
Mechanical travel stops for closing and opening manoeuvres
4
ToonaKit
For 24 V versions
24
Code
Description
PS324
24 V battery with integrated battery charger
Pc/Pack
1
Accessories for Wingo
WingoKit
Code
Description
PLA14
PLA15
CM-B
PLA13
Screw-adjustable rear bracket
Screw-adjustable front bracket
Pawl with two metal release keys
Mechanical travel stops for closing and opening manoeuvres
Pc/Pack
2
2
4
WingoKit 4024
Code
Description
PS124
PLA14
PLA15
CM-B
PLA10
24 V battery with integrated battery charger
Screw-adjustable rear bracket
Screw-adjustable front bracket
Pawl with two metal release keys
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
2
2
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
Mechanical travel stops for closing and opening manoeuvres
4
1
Wingo5Kit
Code
Description
PLA6
PLA8
CM-B
PLA10
Rear bracket 250 mm long
Screw-adjustable front bracket
Pawl with two metal release keys
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
Mechanical travel stops for closing and opening manoeuvres
4
1
WingoKit 5024
Code
Description
PS124
PLA6
PLA8
CM-B
PLA10
24 V battery with integrated battery charger
Rear bracket 250 mm long
Screw-adjustable front bracket
Pawl with two metal release keys
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
PLA13
Mechanical travel stops for closing and opening manoeuvres
4
1
25
To complete your automation:
Accessories for Walky
WalkyKit 1024
Code
Description
WLA1
PS424
PLA10
Spare control unit, for WL1024C
Buffer battery
Vertical 12 V electric lock
(required for gates longer than 3 m)
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
1
WalkyKit 2024
Code
Description
WLA1
PS424
PLA10
Spare control unit, for WL1024C
Buffer battery
Vertical 12 V electric lock
(required for gates longer than 3 m)
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
1
Accessories for Pop
Pop
Code
Description
POA1
PS124
PLA10
Spare control unit for PP7024
24 V battery with integrated battery charger
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
KIO
Key-operated selector switch for low voltage contacts,
with release mechanism for metal cord
1
KA1
TS
6 m cable release kit for KIO
Signboard
1
1
1
1
PopKit
Code
Description
POA1
PS124
PLA10
Spare control unit for PP7024
24 V battery with integrated battery charger
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
KIO
Key-operated selector switch for low voltage contacts,
with release mechanism for metal cord
1
KA1
TS
6 m cable release kit for KIO
Signboard
1
1
1
1
Accessories for Hyppo 7000
Code
Description
HYA12
PLA10
Longer articulated arm (see the layout)
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
KIO
Key-operated selector switch for low voltage contacts,
with release mechanism for metal cord
1
KA1
TS
6 m cable release kit for KIO
Signboard
1
1
For 24 V versions
26
Code
Description
PS324
24 V battery with integrated battery charger
Pc/Pack
1
Accessories for X-Metro
X-MetroKit 2024
Code
Description
PS124
PLA10
24 V battery with integrated battery charger
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
X-MetroKit 2124
Code
Description
PS324
PLA10
24 V battery with integrated battery charger
Vertical 12 V electric lock
(required for gates longer than 3 m)
Pc/Pack
1
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
Accessories for Metroplex
Code
Description
MEA2
MEA3
Key unlock system
Lever-type key unlock system to use when system is installed
on surfaces such as sand or earth
Pc/Pack
1
1
MEA5
MEA6
Lever-type unlock key for MEA3
Limit switch bracket, for installations where box embedding in concrete
is not possible
4
1
MEA1
Accessory for opening up to 360° for gates
max. 2.5 m in length
1
PLA10
Vertical 12 V electric lock
(required for gates longer than 3 m)
1
PLA11
Horizontal 12 V electric lock
(required for gates longer than 3 m)
1
TS
Signboard
1
Code
Description
Pc/Pack
PS324
24 V battery with integrated battery charger
For 24 V versions
1
27
Nice control electronics
With just a click!
Small, slim and coloured, ideal to carry in your pocket,
bag or use as stylish key rings, or table-top or wall-mounted,
for control the entire home at your fingertips!
28
NiceWay: many solutions, just one gesture.
Table shockproof holder.
Wall or table shockproof
holder.
Squared wall plate.
Rectangular wall plate.
Module holder cover.
FloR
Radio-control 433.92 MHz
rolling code system with
self-learning function.
1, 2 and 4 channels
versions.
Very
Miniaturised radio control
433.92 MHz rolling code
system with self-learning
function or programmable
code.
Smilo
Radio-controls
433.92 MHz rolling code
system with self-learning
function. 2 and 4
channel versions.
Transmitters
One
433.92 MHz and 868.46 MHz transmitters,
with management of Identity Codes and Certificates.
Compatible with Opera System.
1, 2, 4 and 9 channel versions.
Tag system
Disappearing inside standard wall mounted plates
and suitable to confined spaces, are ideal for restorations
and upgrades of existing systems to control home
automations, lighting points and all loads up to 500 W
not directly accessible from cable controls.
All without the need to replace the existing system
or involve building work!
29
Nice control electronics
Control units
Moonclever and Mindy
Range of Nice control units: all kinds
of models for all kinds of automations,
from the simplest to the most sophisticated,
which offer exclusive, fully-developed functions
by means of magnetic encoders.
New Moonclever MC824H,
the innovative control unit with
magnetic encoder for motors 24 Vdc,
equipped with BlueBUS technology
and designed for operation
with the systems Solemyo and Opera.
Accessories
Moon
Range of digital and key switches, proximity sensor reader for transponder
card and synchronised photocells with a 10° receiving angle, also available
in a 30° version adjustable, with BlueBUS technology.
F210
Synchronised photocells
adjustable at 210° horizontally,
with relay output or BlueBUS
technology.
30
FT210
Optical device adjustable
at 210° horizontally and 30°
vertically. With relay output
or BlueBUS technology.
Moonlight and Wallyght
Modular flashing signal light
and multi-function Led indicator.
System Opera
One
Transmitters
and receivers
O-View
Multifunction
display
O-Box
Connection interface
OX4T
Universal
receiver
Nice Opera simplifies the installer’s work, making for easier programming,
and enabling access to all control panel parameters to adapt the system
to all requirements. No specific procedures needed for each product: single
programming mode with intuitive menus, with no need to consult instructions.
Thanks to the GSM module, diagnostics can be performed remotely
and the automation can be monitored constantly avoiding costly inspections
on site with significant savings in time.
The BUS T4 technology enables the creation of a network of devices,
connecting compatible control units between them, and centralising control
via O-View. By interfacing the system with the PC, you can control a complex
automation system such as those found in densely frequented buildings
(hospitals, hotels, companies, etc.).
O-View_O-Box
Software Suite
Communication
software for PC
and PDA
Management of the One series transmitters, even in large numbers,
is now fast and simple with the option for remote control,
and the creation of a database thanks to the software supplied.
31
Project Blu Product Design Roberto Gherlenda Photo Blu Printed by XXXX
Service
Dealers who offer Nice products to their
customers believe in the value of quality;
providing service that satisfies all the needs
and wishes of customers, before and after
sales, is a duty. Contact a Nice specialist
with complete trust!
Nice cares for the environment.
Using natural paper it avoids excessive
use of raw materials and forest exploitation.
Waste is reduced, energy is saved
and climate quality is improved.
Nice SpA
Oderzo TV Italia
Ph. +39.0422.85.38.38
Fax +39.0422.85.35.85
[email protected]
Find out more about Nice
products and services on the website:
www.niceforyou.com
DEP3401
Safety, quality, reliability and durability
are priorities for Nice. All Nice Products
in fact comply with the provisions
of the European Directives
governing construction.
The information shown in this publication is purely indicative. Nice reserves the right to make any modifications to the products as it sees fit.
Certified quality.

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project