Avid Configuration Guidelines
HP Z420 Six-Core CPU Workstation
Media Composer 6.x Symphony 6.x NewsCutter 10.x and later
Page 1 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
1.) HP Z420 AVID Qualified System Specification:
Z420 / AVID Qualified Operating System:
Microsoft® Windows 7 Professional 64-bit Edition with Service Pack 1
Z420 Hardware Configuration
Supported CPU
Single Intel® 6-Core Xeon® E5-1650 Processor @ 3.2GHz 12MB cache / 1600MHz memory
Supported Video Card
NVIDIA Quadro 2000 1GB PCI-e video board
System Disk Drive - 1TB (minimum recommended) SATA-II 3Gb/s 7200RPM
Standard AVID memory configuration: 8GB (4 x 2GB) DDR3 1600 ECC memory –
(Requires four 2GB DIMMs, DIMM sizes cannot be mixed sizes )
2GB memory modules must be installed in the following memory slots:
CPU0-DIMM1, CPU0-DIMM3, CPU0-DIMM6, CPU0-DIMM8
Optional 16GB memory configuration:
Optional AVID memory configuration: 16GB (8 x 2GB) DDR3 1600 ECC memory –
(Requires eight 2GB DIMMs, DIMM sizes cannot be mixed sizes )
2GB memory modules must be installed in the following memory slots:
CPU0-DIMM1, CPU0-DIMM2, CPU0-DIMM3, CPU0-DIMM4
CPU0-DIMM5, CPU0-DIMM6, CPU0-DIMM7, CPU0-DIMM8
Memory configuration constraints
-
No other memory configurations are formally supported in AVID environments. Only the 8GB (4 x 2GB), and 16GB (8 x 2GB) configurations are supported. Un-balanced memory configurations which mix and match memory module sizes and locations will result in a poor performing, non-optimal operating environment.
2.) Qualified Operating Systems, Avid Client Editing Applications, Hardware and Shared-Storage support for the HP Z420:
-
Media Composer / Symphony 6.x , NewsCutter 10.x or later
-
Supported: Only Microsoft® Windows 7 Professional 64-bit Edition with SP1 (SP1 required)
-
Not Supported – Any version of Microsoft® Windows XP or Vista
-
Not Supported - Microsoft® Windows 7 – any 32-bit version, or any version of Home, Ultimate or
Enterprise editions.
Note regarding Service packs:
As of this writing Service Pack 1 is the current Service Pack release for Win7. SP1 is required for Media
Composer 6.x, Symphony 6.x and NewsCutter 10.x. As future Service Packs are released Avid will evaluate and announce formal support when testing is completed.
Page 2 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
3.) Qualified O.S., Hardware and shared storage supported:
Nitris DX / Mojo DX
3 rd
Party Qualified Hardware
Unity ISIS 1Gb Ethernet Client
Unity ISIS Hi-res (10 Gbit) client
Qualified Operating System
Service Pack
1394 Adrenaline DNA
1394 Mojo-SDI DNA
1394 Mojo-Analog DNA
Qualified / Supported
Yes
See release notes and Avid website for information regarding supported 3 rd
party hardware (vendor qualified)
ISIS 5000 / 7000 V4.0
ISIS 5000 / 7000 V4.0
Win 7 Pro 64-bit
SP1 – Required
N/A Not Supported
N/A Not Supported
N/A Not Supported
Page 3 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
AVID qualified HBA
Avid HIB, DX Interface HBA
**
Vendor qualified 3 rd
party hardware interface requiring:
x4 PCI-E or lesser interface
Intel PRO 1000 PT
Intel i350-T2 – Dual Gb NIC
Intel PRO 1000 PF - ISIS
Myricom
Atto R680
10G-PCIE-8B-S
LSI 9200-8e SAS controller
Vendor qualified 3 rd
party hardware interface requiring:
x8 PCI-E or greater interface
AVID qualified HBA info
AVID Part Number
Slot
Location
Active: 7030-30048-01
Active: 7030-20084-01
Passive: 7030-30021-01
Not stocked by AVID
#3
#3
Function
Avid DX Hardware Interface HBA
7030-20139-01
Not stocked by AVID
Not stocked by AVID
7030-30041-01
Not stocked by AVID
7030-30036-01
Not stocked by AVID
#4
#4
#4
#4
#5
#5
#4 or #5
Vendor qualified 3 rd
party hardware interface.
See release notes and Avid website for information regarding supported 3 rd
party hardware
Shared Storage: Unity ISIS Copper Gb-Ethernet
Dual Gb ISIS Connectivity
Shared Storage: Unity ISIS Copper Gb-Ethernet
Dual Gb ISIS Connectivity
Shared Storage: Unity ISIS Optical Gb-Ethernet
Shared Storage: Unity ISIS 10Gb-Ethernet for
Hi-Res client
(ISIS 5000 / 7000)
Local SAS Storage Support –
Avid VideoRAID ST (5-bay)
Xtore StudioRAID 5Ti (5-bay)
Local SAS Storage Support –
Xtore StudioRAID 16Re (16-bay) chassis
Xtore StudioRAID 5Te (5-bay) chassis
Vendor qualified 3 rd
party hardware interface.
See release notes and Avid website for information regarding supported 3 rd
party hardware
**
Avid DX Interface HBA Support Note: (See reference pictures on page 6 of this guide ).
All 3 versions of the DX interface HBA are supported on the Z420 with Media Composer / Symphony 6.x and
NewsCutter 10.x
1) Active DX interface HBA 7030-30048-01
2) Active DX interface HBA 7030-20084-01
3) Passive DX interface HBA 7030-30021-01
Page 4 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
4.) Slot Configuration:
Slot #
1
2
6
5
4
3
Electrical x1 PCI-E Gen 2 x16 PCI-E Gen 3
(225Watts) x4 PCI-E Gen 2 x8 PCI-E Gen 3 x16 PCI-E Gen 3
PCI-E 32bit /33MHz
Mechanical x4
Openended
Connector x16
Slot Configuration Information
Not recommended for use in Avid Configurations x8
Openended
Connector x8
Openended
Connector x16
PCI 32/33
Graphics Card:
Nvidia Quadro 2000
Avid HIB, DX Interface HBA
Active: 7030-30048-01 & 7030-20084-01
Passive: 7030-30021-01
OR
Vendor
Qualified 3 rd
Party Hardware PCI-e Interface
requiring: x4 PCI-E or lesser interface
Shared Storage Controllers required for ISIS 5000 / 7000:
Intel PRO 1000 PT
Intel PRO 1000 PF
Intel i350-T2
Myricom
10G-PCIE-8B-S
OR
Vendor
Qualified 3 rd
Party Hardware PCI-e Interface
requiring: x8 PCI-E or greater interface
Local SAS Storage Controllers:
Atto R680
LSI 9200-8e
OR
Vendor
Qualified 3 rd
Party Hardware PCI-e Interface
requiring: x8 PCI-E or greater interface
Not recommended for use
Shares the same PCI bus as the embedded 1394a controller
Will cause bus contention with embedded 1394a
Embedded Intel
82579LM
Gb NIC
PCI-E x1
Gen 1
Do not use for ISIS. Not qualified and is not functional with ISIS 5000 / 7000.
Page 5 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
6.) Utilization of the Z420 embedded (on-board) 1394 ports for Camera / Deck / Disk Drive support
Media Composer / Symphony 6.0 and NewsCutter 10 do not support Avid 1394 hardware such as Adrenaline and
1394 Mojo-SDI. This simplifies utilization of the Z420 embedded 1394 ports. The embedded 1394 ports can and should be used
for all 1394 Camera / Deck / Disk Drive connectivity for all configurations running Media Composer / Symphony 6.0 and
NewsCutter 10.
7.) Various Configuration Details:
A.) D/X hardware configs –
All 3 versions of the DX interface HBA are supported with the Media Composer / Symphony 6.x and NewsCutter 10.x
1) Active DX interface HBA 7030-30048-01
2) Active DX interface HBA 7030-20084-01
3) Passive DX interface HBA 7030-30021-01
Active DX interface HBA 7030-30048-01 Active DX interface HBA 7030-20084-01
Passive DX interface HBA (7030-30021-01)
Page 6 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
B.) Qualified Avid system BIOS version(s): (As of this writing):
Failure to update the Z420 to an “Avid qualified BIOS” and set the BIOS settings per the instructions below may result in non-optimal operation of the AVID software and hardware.
- Minimum BIOS ver 1.14
Current Avid qualified Z420 BIOS information is maintained at the following Avid KB link: http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=267609&Hilite=hp+bios
C.) Required system BIOS settings for AVID environments:
Hyper-Threading Setting:
Please Note: CPU Hyper-threading should be enabled in all configurations per the chart below. It is currently enabled by default by HP for shipping Z420’s with BIOS ver 1.14 or earlier
Software Version
Media Composer v6.x
Symphony v6.x
NewsCutter v10.x
Dual 6-core CPU
Enabled (Mandatory)
Dual 8-core CPU
Enabled (Mandatory)
Z420 Required system BIOS changes:
1. Verify CPU Processors are set to Hyper-Threading – Set per chart above. Current version
BIOS v1.14 has Hyper-Threading enabled by default
2. Set Runtime Power Management - Disable
3. Set Idle Power Savings - Normal
Z420 Optional system BIOS change:
1. Set Intel Turbo Mode
**
– Disable
**
Only required if connecting USB audio I/O devices. This setting will eliminate any audio
“motor-boating” or audio “popping” which may be experienced with USB audio I/O devices.
Page 7 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
Set Z420 Required system BIOS changes:
- During boot up press F10 at the HP splash screen to invoke Set Up.
- Select the Advanced tab
- Select Device Options <Enter>
- Verify setting is Enable
If Hyper-Threading is set for Disable then it must be changed to Enable
- Hi F10 to save the Hyper-Threading setting
- Select the Power tab
- Select OS Power Management <return>
- Select Runtime Power Management
- Default setting is Enable
Change this setting from Enable to Disable
- Select Idle Power Savings
- Default setting is Extended
Change this setting from Extended to Normal
- Hi F10 to save the Runtime Power Management and Idle Power Savings settings
- Press F10 twice to Save
- Save Changes and Exit
- System will Reboot
Set Z420 Optional system BIOS setting:
**
Only required if connecting USB audio I/O devices.
- Select the Power tab
- Select OS Power Management <Enter>
- Select Intel Turbo Mode
- Default setting is Enable
Change this setting from Enable to Disable
- Press F10 twice to Save
- Save Changes and Exit
Page 8 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
D.) Nvidia Qualified Driver:
Nvidia qualified drivers
AVID Software
Media Composer / Symphony
NewsCutter
Version(s)
6.0 and later
10.0 and later
Nvidia GPU
Quadro 4000
Nvidia Driver Required
275.89
After installation of the AVID software the supported Nvidia driver can be found in the following directory:
Program Files / Avid / Utilities / Nvidia
Set optimized Nvidia driver settings for Avid editing environments:
1. See picture below
2. Right-Click on the desktop and select Nvidia Control Panel
3. Select the “Desktop” menu selection in the control panel menu bar.
4. Enable “Desktop -> Video Editing Mode
Page 9 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
5. Select Manage 3D Settings
6. Select “Global Settings” Tab
7. Under the “Global Settings” tab select “Base Profile” as shown in the picture below:
Page 10 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
8. Scroll down and locate the “Power Management Mode” feature. The default setting is “Adaptive” as shown in the picture below.
Page 11 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
9. For the “Power management mode” feature, select “Prefer maximum performance” as shown in the picture below.
10. Depress the “Apply” button.
Page 12 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
Make the following setting for “Multi-display/mixed-GPU acceleration”
11. Stay in the “Manage 3D Settings” and “Base Profile” area
12. Select “Global Settings” Tab
13. Scroll down and locate the “Multi-display/mixed-GPU acceleration” feature. See picture below. The setting should be set to “Multiple display performance mode”. If not set properly, select Multiple display performance mode and depress the “Apply” button. (The other settings are “Single display performance mode” and “Compatibility performance mode”. These settings are not recommended for
Avid editing environments).
Page 13 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
Make the following additional setting for “3D App-Video Editing”
14. Stay in the “Manage 3D Settings” area
15. Select “Global Settings” Tab
16. Under “Global Settings” tab select “3D App-Video Editing” setting as shown in picture below:
17. Depress the “Apply” button
18. Nvidia driver optimization settings for Avid environments are complete.
Page 14 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
E.) Nvidia Quadro GPU monitor connectivity:
The Nvidia Quadro 2000 graphics card has a single DVI port and two Display-Port ports
(Important: Display-ports are not HDMI ports; at first glance they do look very similar to HDMI ports)
( Please Note: Only two of the three video ports can simultaneously be used. Connecting to all three video ports at the same time will result in non-functioning video output from the Nvidia GPU video card.)
The HP Z420 includes one Display-Port-to-DVI adapter. HP P/N 481409-002
For dual monitor connectivity:
1. Use the DVI port and one Display-Port (Display-Port connection can be native display-port to monitor via display-port connection, or use the display-port-to-DVI-adapter supplied with the system to connect to a native
DVI monitor).
2. Or use two Display-Ports (Requires monitors with native display-port connections, two display-port to DVI adapters are not recommended when using dual display-port connections).
DVI Port
Display Ports
Page 15 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
F.) Serial Port Deck Control:
Serial Port Deck Control:
The HP Z420 workstation does not have an embedded serial port. Serial port deck control can be established via two methods (both of which have been qualified by Avid and will maintain frame accuracy in Avid environments)
USB port of the Z420 directly to the RS422 port of a deck.
http://www.addenda.com/addenda-elect/products/rsUSB4.php
2. Combination of a Keyspan (Tripp-Lite) Model USA-19HS USB-to-serial-port adapter with Addenda Rosetta
Stone model RS – 2/8 RS232-to-RS422 converter
- Keyspan (Tripp-Lite) Model USA-19HS (AVID P/N 7080-20013-01) http://www.tripplite.com/en/products/model.cfm?txtSeriesID=518&EID=13384&txtModelID=3914
- Addenda Rosetta Stone (or equivalent) model RS – 2/8 RS232-to-RS422 converter (AVID P/N
7070-00507-01) http://www.addenda.com/addenda-elect/products/rs28.php
To connect the Keyspan 19HS / Addenda RS -2/8 combination:
- Install the Keyspan 19HS driver before plugging the device into a Z420 USB port.
- Once the Keyspan 19HS driver is installed then plug the Keyspan 19HS into a Z420 USB port.
- The Keyspan 19HS will now show up in device driver.
- Using a serial cable, connect the 9-pin serial port of the Keyspan 19HS USB adapter to the port of the
-
Addenda marked RS232 from PC
Using a 2 nd
serial port cable connect the port of the Addenda marked “RS422 to VTR” to the deck control serial port of the deck.
G.) O.S. setting recommendations for optimum performance with Avid Editing applications:
The following links provide O.S. setting suggestions for ensuring optimum performance when working with your Avid editing application with a Windows operating system.
- Optimizations for Video Editors - Windows 7 http://avid.custkb.com/avid/app/selfservice/search.jsp?DocId=390339
Page 16 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
H.) Set Windows “Visual Effects” for “best performance”:
1. Right-Click on My Computer / Computer
3. The screen below will be displayed:
4. On the left side of the screen above, locate and select “Advanced system settings”
Page 17 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
5. The System properties window will be displayed. (Picture below).
6. Under the “Advanced” tab depress the “Settings...” button for performance.
Page 18 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
8. Under the “Visual Effects” tab select the “Adjust for best performance” selection. (Picture below).
9. Depress the “Apply” button
10. Reboot Windows
11. Required Windows visual performance settings for Avid environments are now complete.
Page 19 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
I.) Intel NIC Port(s) for ISIS 5000 / 7000 connectivity:
Required for Gb ISIS connectivity:
Intel PRO 1000 Dual Gb HBA or Intel i350-T2 Dual Gb NIC HBA
For proper operation and connectivity of any Intel NIC port used with ISIS the settings below are required.
Example below is for the Intel PRO 1000 PT.
1. For the performance settings, change the following parameters:
- Receive Buffers to 1024
- Transmit Buffers to 1024
2. Disable the windows firewall.
To set the Intel NIC Receive / Transmit buffers:
Go to device manager and select each instance of the network adapter device which will be used for ISIS connectivity.
Select performance options and then select Properties.
Page 20 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
Set Receive Buffers to 1024 Set Transmit Buffers to 1024
Perform this for each instance of every Intel NIC port which will be used for ISIS connectivity.
J.)
Disable the windows firewal l:
Navigate to Control Panel / Windows Firewall -- Select Turn Windows Firewall on or off
Page 21 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
Select Turn off windows firewall in both network locations, OK to save
Revision Update
Revision Date
Sept 20 th
, 2012 A
Name
Joe Conforti
Update
Initial release of the Z420 configuration guide for support of
Media Composer 6.x, Symphony 6.x and NewsCutter 10.x
Page 22 of 22 Joe Conforti
– Avid Technology – September 20th, 2012
Rev A - Initial Public Release
