Toyota Tundra Reference guide

Toyota Tundra Reference guide
2015 Tundra
Quick Reference Guide
2015
Tundra
OVERVIEW
FEATURES/OPERATIONS Air Conditioning/Heating
Your dealership and the entire staff of Toyota Motor Sales, U.S.A.,
Inc. wish you many years of satisfied driving in your new Tundra.
A word about safe vehicle operations
This Quick Reference Guide is not a full description of Tundra
operations. Every Tundra owner should review the Owner’s
Manual that accompanies this vehicle.
Doors-Child safety locks
Floor mat installation
EMERGENCY FEATURES Seat belts
Seat belts-Shoulder belt anchor
Spare tire & tools
Star Safety SystemTM
Trailer Sway Control
Tire Pressure Monitoring (warning) System
SAFETY AND
1
2
3
31
33
30
30
31
32-33
33
30
Visit your Toyota dealer for information on customizing this feature.
Programmable by customer. Refer to the Owner’s Manual for instructions and more information.
HomeLink® is a registered trademark of Gentex Corporation.­­
1
SAFETY AND EMERGENCY FEATURES
Pay special attention to the boxed ­­information highlighted in
color throughout the Owner’s Manual. Each box contains safe
operating instructions to help you avoid injury or equipment
malfunction.
FEATURES/OPERATIONS
20-21
Audio22-23
9
Automatic Transmission
Bottle holders
28
Blind Spot Monitor (BSM) with Rear Cross Traffic Alert27
Bluetooth® Device Pairing Section
35-44
Cruise control
27
Cup holders
29
11
Door locks
Entune™ Audio Plus
24
Four-wheel drive
10
Garage door opener (HomeLink®)321
Lights1 & turn signals
16
Mirrors-Power side view
10
Moonroof12
Multi-Information Display226
Parking brake
18
Power outlets-12V DC
17
14
Rear seats-Folding Seat adjustments-Front
13
Seat heaters and ventilators
19
Seats-Head restraints
14
Telephone controls (Bluetooth®)28
Tilt and telescopic steering wheel
11
TOW/HAUL switch
11
Traffic25
Trailer brake controller
15
VSC OFF switch
26
Weather25
Window-Rear19
Windows-Power18
15
Windshield wipers & washers
The Quick Reference Guide is not intended as a substitute for the
Owner’s Manual located in your vehicle’s glove box. We strongly
encourage you to review the Owner’s Manual and supplementary
manuals so you will have a better understanding of your vehicle’s
capabilities and limitations.
All information in this Quick Reference Guide is current at the
time of printing. Toyota reserves the right to make changes at
any time without notice.
Engine maintenance
8
7
Fuel tank door release and cap
Hood release 7
Indicator symbols
4-5
4
Instrument cluster
Instrument panel
2-3
Keyless entry16
Light control-Instrument panel
6
OVERVIEW
This Quick Reference Guide is a summary of basic vehicle
operations. It contains brief descriptions of fundamental operations
so you can locate and use the vehicle’s main equipment quickly
and easily.
INDEX
OVERVIEW
Instrument panel
Steering wheel controls
OVERVIEW
FEATURES/OPERATIONS
2
12V DC power outlet
AUX port/USB port1
Emergency flasher switch
Two-wheel/Four-wheel drive selector1
Ignition switch
Power rearview mirror controls1
Headlight leveling dial1
BSM (Blind Spot Monitor with Rear Cross Traffic Alert) main switch1
Power back window switch1
Cargo lamp main switch
Personal/Interior lights main switch
1
2
If equipped
For vehicles with a navigation system, refer to the “Navigation System
Owner’s Manual.”
3
SAFETY AND EMERGENCY FEATURES
Steering wheel audio controls2
Telephone controls2
Multi-Information Display switch1
Cruise control1
Voice command button1,2
Headlight, turn signal and front fog light1 controls
Wiper and washer controls
Automatic Transmission shift lever1
Intuitive parking assist button1
VSC OFF switch
TOW/HAUL switch1
Trailer brake controller
Display Audio system2
Air Conditioning controls
OVERVIEW
Instrument cluster
OVERVIEW
Open door warning
With Multi-Information Display
Airbag SRS warning1
Master warning1
Automatic Transmission fluid temperature warning1
Low Tire Pressure Warning1
Low windshield washer fluid level warning1
Theft deterrent/Engine immobilizer system indicator
Blind Spot Monitor warning1/Blind Spot Monitor outside
rearview mirror indicators
Tachometer
Engine coolant temperature
Service indicator and reminder
Fuel gauge
Speedometer
Voltmeter
“ODO/TRIP” and instrument panel light control button
“TRIP/INFO” and instrument panel light control button
Multi-Information Display­­­
Trip information display
Oil pressure gauge
Headlight low/high beam indicator
Turn signal indicator
Slip indicator1
Vehicle Stability Control ­OFF indicator1
FEATURES/OPERATIONS
High/Low speed four-wheel drive indicator
TOW/HAUL mode indicator
AUTO Limited Slip Differential indicator1
Indicator symbols
Cruise control indicator2/Cruise control SET indicator
For details, refer to “Indicators and warning lights,” Section 2-2, 2014 Owner’s
Manual.
Anti-lock Brake System warning1
Traction Control OFF indicator1
Brake system warning1
Driver/Front passenger seat belt reminder
(alarm will sound if speed is over 12 mph)
SAFETY AND EMERGENCY FEATURES
Charging system warning1
Front passenger occupant classification or front passenger airbag ON/OFF
indicator
Low engine oil pressure warning1
Malfunction/Check Engine indicator1
Engine oil replacement reminder1
Low fuel level warning
1
4
If indicator does not turn off within a few seconds of starting engine, there may be a
malfunction. Have vehicle inspected by your Toyota dealer.
2 If this light flashes, refer to “Cruise control,” Section 4-5, 2015 Owner’s Manual.
5
OVERVIEW
Keyless entry (if equipped)
Fuel tank door release and cap
Locking operation
OVERVIEW
Store
Pull
Turn to open
Push
Unlocking operation
NOTE: Tighten until one click is
heard. If the cap is not tightened
enough, Check Engine “ ”
indicator may illuminate.
Hood release
FEATURES/OPERATIONS
PushONCE: Driver door
TWICE: All doors
NOTE: If a door is not opened within 60 seconds of unlocking, all doors will relock for
safety.
Panic button
Pull
Push and hold
Light control-Instrument panel
SAFETY AND EMERGENCY FEATURES
Brightness
control
Pull up latch and
raise hood
+
6
7
FEATURES/OPERATIONS
OVERVIEW
Automatic Transmission
4.6L 8 cylinder (1UR-FE) and
5.7L 8 cylinder (3UR-FE/3UR-FBE) engines
Floor shift type
+
OVERVIEW
Engine maintenance
(“S” mode)
Park*
Reverse
Neutral
Drive
- (“S” mode)
N
“S” mode
Column shift type
+
(“S” mode)
Park*
Reverse
Neutral
Drive
- (“S” mode)
N
NOTE: Regularly scheduled maintenance, including oil changes, will help
extend the life of your vehicle and maintain performance. Please refer
to the “Warranty & Maintenance Guide.”
“S” mode
FEATURES/OPERATIONS
Windshield washer fluid tank
Engine oil level dipstick
Engine coolant reservoir
Engine oil filler cap
Power steering fluid reservoir
* The ignition switch must be set at “ON” and the brake pedal depressed to shift
from Park.
“S” (Sequential) mode
Shift the shift lever to “S” position from “D” position.
Downshifting increases power going uphill, or provides engine braking downhill.
For best fuel economy during normal driving conditions, always drive with the shift
lever in the “D” position.
8
9
SAFETY AND EMERGENCY FEATURES
Floor shift type:
+: Upshift (push and release)
-: Downshift (pull and release)
Column shift type:
+: Upshift (push and release)
-: Downshift (push and release)
FEATURES/OPERATIONS
Tilt and telescopic (if equipped)
steering wheel
Four-wheel drive (if equipped)
Turn
Manual
Tilt steering wheel
Tilt and telescopic steering wheel
Angle
Length
OVERVIEW
Push and turn
Angle
Turn
Lock release lever
2WD
4H
Hold wheel, push lever down, set angle and length, and return lever.
High speed (4WD)
Turn to “4H” from “2WD”.
Shift to “N” position when stopped, then turn to “4H” from “4L.”
Low speed (4WD)
Shift to “N” position when stopped, then turn to “4L” from “4H.”
For best fuel economy and performance under normal driving conditions, keep in
“2WD” position.
Mirrors-Power outside rearview
(if equipped)
Adjust
Angle
Up
Away from
the driver
Toward the
driver
Control switch
Down
Length
Push the control switch, set angle and length.
Type A, B
NOTE: Do not attempt to adjust while the vehicle is in motion.
Select left or right
Fold mirrors in
Adjust
Power
FEATURES/OPERATIONS
4L
High speed (2WD)
Turn to “2WD” from “4H”.
Lock release lever
Return mirrors to
original position
Door locks (if equipped)
Unlock
Lock
SAFETY AND EMERGENCY FEATURES
Key must be in the “ACC” or “ON” position.
Extend
Type B
Mirrors can be manually slid outward to improve visibility while towing.
10
11
FEATURES/OPERATIONS
TOW/HAUL switch (if equipped)
Floor shift type
Seat adjustments-Front
Manual seat
Column shift type
Separate seat
OVERVIEW
System ON/OFF
System ON/OFF
“Tow/Haul” mode can be used when carrying heavy loads. As fuel economy is
reduced while in “Tow/Haul” mode, deactivating when driving without a load is
recommended.
Bench seat
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
FEATURES/OPERATIONS
Moonroof (if equipped)
Sliding operation
Tilting operation
Power seat
Tilt
Close
Open
Close
Push once to open/close completely. To stop partway, press the switch lightly.
12
13
SAFETY AND EMERGENCY FEATURES
Seat position (forward/backward)
Seatback angle
Seat cushion length (driver seat only)
Seat cushion (front) angle (driver seat only)
Seat height (driver seat only)
Lumbar support
Seatback angle (center)
FEATURES/OPERATIONS
Windshield wipers & washers
Seats-Head restraints
Front
With intermittent wiper
Adjust frequency*
Single wipe
Pull to wash
and wipe
(2)
Interval wipe
(2)
(1)
Lock release button
OVERVIEW
Rear-Center seat
(double cab models)
(1)
Slow
Fast
Lock release button
Rear-Center seat
(CrewMax models)
Rear-Outer seat
To use
2
* Intermittent windshield wiper frequency adjustment
Rotate to increase/decrease wipe frequency.
To fold
Without intermittent wiper
Single wipe
Pull to wash
and wipe
(2)
Lock release button
Lock release button
FEATURES/OPERATIONS
Slow
(1)
Fast
Trailer brake controller (if equipped)1
Rear seats-Folding (if equipped)
GAIN
TYPE
(1)
(2) Full
(3) Lift up
The trailer brakes can be controlled by the Trailer brake controller via
the 7-pin connector. By selecting the type of brakes that are being
used on the trailer (electric or electric-over-hydraulic) and setting the
gain for the controller, the manual TRAILER BRAKE OUTPUT slider
is used to slow just the trailer. The vehicle brake pedal will also slow
down as well as stop the trailer when applied, also via the same connector.
Gain values, manual brake outputs, trailer brake types, and
the trailer connection status are displayed in the multi-information display.*
* For more information on Trailer brake controller, please refer to the OWNER’S MANUAL.
14
15
SAFETY AND EMERGENCY FEATURES
Trailer connector
indicator
GAIN (+/-)
selection button
Trailer brake
TYPE
selection button
Manual TRAILER
BRAKE OUTPUT
slider
FEATURES/OPERATIONS
Lights & turn signals
Power outlets-12V DC (if equipped)
Headlights
Separate seats
Instrument panel
Inside of the console box
Back of the console box (type A)
Back of the console box (type B)
Headlights
Parking lights
OVERVIEW
Auto*
* If equipped
High beam flasher
Low beam
High beam
FEATURES/OPERATIONS
-Daytime Running Light system (DRL) Automatically turns on the headlights to
make vehicle more visible to other drivers. Not for use at night.
-Automatic light cut off system Automatically turns lights off after 30-second
delay, or lock switch on remote may be pushed after locking.
Bench seat
Instrument panel
Front fog lights (if equipped)
Turn
Front fog lights come on only when the headlights are on low beam.
Back of the front center seat (type A)
Back of the front center seat (type B)
Right turn
Lane change
Lane change
Left turn
Key must be in the “ACC” or “ON” position to use.
16
17
SAFETY AND EMERGENCY FEATURES
Turn signals
FEATURES/OPERATIONS
Parking brake
Window-Rear (if equipped)
Close Open
Set: Depress
Release: Depress again
Windows-Power (if equipped)
Driver side
Window lock switch
Up
CrewMax model
Close
OVERVIEW
Double cab model
Open
Seat heaters (if equipped) and
ventilators (if equipped)
Seat heaters
Hi
Mid
Low
off
FEATURES/OPERATIONS
Down
Automatic operation (passenger side for some models and driver side) Push
the switch completely down or pull it completely up and release to fully open or
close.* To stop window partway, lightly push the switch in the opposite direction.
Driver seat
Front passenger seat
Window lock switch Deactivates all passenger windows. Driver’s window remains
operable.
* Not all models are equipped with one-touch close function.
Seat heaters and ventilators
Seat heaters
Hi
Seat ventilators
Mid
Low
off
Hi
Mid
Low
off
SAFETY AND EMERGENCY FEATURES
Driver seat
18
Front passenger seat
Driver seat
19
Front passenger seat
FEATURES/OPERATIONS
Manual Air Conditioning
Air Conditioning/Heating
Automatic Air Conditioning
OVERVIEW
Garage door opener (HomeLink®)*
(if equipped)
Refer to “Garage door opener,” Section 6-4 in the Owner’s Manual for more
details.
For programming assistance, contact HomeLink® at 1-800-355-3515, or visit
http://www.homelink.com.
* HomeLink® is a registered trademark of Johnson Controls, Inc.
20
21
SAFETY AND EMERGENCY FEATURES
Garage door openers manufactured under license from HomeLink®* can be
programmed to operate garage doors, estate gates, security lighting, etc.
FEATURES/OPERATIONS
Windshield defogger (fresh air only)
Synchronize temperature settings for driver and passenger.
Air Conditioning ON/OFF
Temperature selector (front passenger side)
Airflow vent
Fan speed
Recirculate cabin air (fresh air when OFF)
Temperature selector (driver side)
Climate control OFF
Automatic climate control ON
Adjusting the temperature setting will cause the airflow vents, air intake
and fan to adjust automatically.
Recirculate cabin air (fresh air when OFF)
Air Conditioning ON/OFF
Airflow vent selector
Temperature selector
Select for maximum cooling. Air intake will automatically be set to
recirculate.
Fan speed
FEATURES/OPERATIONS
Steering wheel switches
Audio
Touch screen display
Push to
display audio
screen
Volume control
>
“
”“
”
Use to search within the selected audio medium (radio, CD, iPod®, etc.).
“MODE”
Push to turn audio ON and select an audio mode. Push and hold to pause the
music or mute.
>
Turn to tune
radio stations
manually or
select tracks
or files
Seek station/
CD track
select
>
Push to turn
ON/OFF
>
Eject CD
OVERVIEW
Entune Audio
iPod®/USB/AUX port
Entune Audio Plus*1/Entune Premium Audio*1/Entune Premium JBL Audio*1
FEATURES/OPERATIONS
*2
*2
*1 Refer to the “Navigation System Owner’s Manual” for instructions.
*2 Entune Premium Audio
iPod®/USB port
By connecting a USB-compatible portable audio device or USB memory to the
USB port, you can listen to music from the portable audio device or USB memory
through the vehicle’s speaker system.
AUX port
By inserting a mini plug into the AUX port, you can listen to music from a portable
audio device through the vehicle’s speaker system while in AUX mode.
SAFETY AND EMERGENCY FEATURES
22
23
FEATURES/OPERATIONS
Entune™ Audio Plus
Traffic
OVERVIEW
1
2
3
The Traffic App displays a scrollable map showing local traffic in 3 colors. Traffic
conditions are displayed in red, yellow and green for heavy, moderate or light
traffic conditions. Use
or
arrows to scroll the map up or down.
Weather
AUDIO Button
Access to audio functions.
2
HOME Button
Access to Home screen.
3
APPS Button
Access to features such as fuel
consumption, traffic, and weather.
FEATURES/OPERATIONS
1
HOME SCREEN - the home
screen offers a two panel
and a three panel layout.
Information and layout will
vary depending on selected
set up.
NOTE: Console configuration and position of buttons may vary in some vehicles.
The Weather App options show current weather and recently checked locations
weather. You can also search for a weather forecast by national or local cities.
Entune™ Premium Audio / Entune™ Premium JBL Audio
Please refer to the Entune™ Premium Audio with Navigation and App Suite
Quick Reference Guide or Toyota Owner’s Manual for additional details
24
25
SAFETY AND EMERGENCY FEATURES
Always drive safely, obey traffic laws & focus on the road while driving. Availability and
accuracy of the information provided by HD services is dependent upon many factors.
Services not available in every city or roadway. Use common sense when relying on
information provided. HD Radio(tm) Technology manufactured under license from iBiquity
Digital Corporation U.S. and Foreign Patents. HD Radio(tm) and the HD, HD Radio, and “Arc”
logos are proprietary trademarks of iBiquity Digital Corp.
FEATURES/OPERATIONS
VSC OFF switch
Cruise control
Turning system ON/OFF
OVERVIEW
System ON/OFF
VSC OFF switch
Without Multi-Information Display
Functions
Resume2
With Multi-Information Display
Increase speed
Cancel1
Refer to Section 4-5 of the Owner’s Manual for more information.
Multi-Information Display (if equipped)
Set
Decrease speed
1 The
2
set speed may also be cancelled by depressing the brake pedal.
The set speed may be resumed once vehicle speed exceeds 25 mph.
Blind Spot Monitor (BSM) with Rear
Cross Traffic Alert (if equipped)
Indicator
Indicator
Buzzer
FEATURES/OPERATIONS
The VSC OFF switch is used to switch between modes related to the TRAC, VSC
and Auto LSD functions.
System ON/OFF
* Push and hold display button to reset.
Refer to your Owner’s Manual for complete details on this system before
attempting to use it.
26
The Blind Spot Monitor is a system that has two functions:
• The Blind Spot Monitor function (assists the driver in decision making when
changing lanes)
• The Rear Cross Traffic Alert function (assists the driver when backing up)
The system uses radar sensors to detect vehicles that are traveling in the area
that is not reflected in the outside rearview mirror (the blind spot), and advises
the driver of the vehicles’ existence via the outside rearview mirror indicator.
Refer to the Owner‘s Manual for more details on this system before attempting
to use it.
27
SAFETY AND EMERGENCY FEATURES
Push “DISP” to scroll through the following:
(1) Total average fuel economy
(2) Instantaneous fuel economy
(3) Cruising range
(4) Running time after starting
(5) Average speed after starting
(6) Trailer Brake Controller*
(7) Setting
FEATURES/OPERATIONS
Cup holders
Telephone controls (Bluetooth®)
Audio unit
Separate seat
Steering wheel telephone switches
Bench seat
Front center seat
Back of the center console box
(double cab model)
Back of the front center seatback
(double cab model)
OVERVIEW
Center console
Start call
End call
Voice
command
button
Microphone
Refer to “Using a Bluetooth® phone,” Section 5-9 in the Owner’s Manual, for more
details.­
FEATURES/OPERATIONS
Bluetooth® technology allows dialing or receipt of calls without taking hands from
the steering wheel or using a cable to connect the telephone and the system.
Bottle holders
Front door
Rear door (CrewMax models)
Rear seat
CrewMax model
SAFETY AND EMERGENCY FEATURES
28
29
SAFETY AND EMERGENCY FEATURES
Doors-Child safety locks
(CrewMax and double cab models)
Seat belts
Rear door
OVERVIEW
Take up slack
Too high
Ta b
Keep as low on
hips as possible
If belt is fully extended, then retracted even slightly, it cannot be re-extended
beyond that point, unless fully retracted again. This feature is used to help hold
child restraint systems securely.
To find more information about seat belts, and how to install a child restraint
system, refer to the Owner’s Manual.
Moving the lever downward will allow the door to be opened only from the outside.
Spare tire & tools
Seat belts-Shoulder belt anchor
(CrewMax and double cab models)
Tool location
Down
Up
Regular cab models
-behind the right seatback
Tool bag
Tool bag
Jack
Jack
Tire Pressure Monitoring (warning)
System
Double cab models
-under the right rear seats
with storage box
Double cab models
-under the right rear seats
without storage box
Tool bag
System reset initialization
1. Push and hold “
SET” button
until the indicator blinks three
times.
2. Wait several minutes to allow
initialization to complete.
FEATURES/OPERATIONS
Push up, or squeeze
lock release to lower
CrewMax models
-behind the right rear seatback
Tool bag
Jack
Jack
Removing the spare tire
(1)
(3)
(2)
Refer to the load label on the door jamb or the Owner’s Manual for tire inflation
specifications.­
If the tire pressure indicator flashes for more than 60 seconds and then remains
on, take the vehicle to your local Toyota dealer.
NOTE: The warning light may come on due to temperature changes or changes in
tire pressure from natural air leakage. If the system has not been initialized
recently, setting the tire pressures to factory specifications should turn off the light.
30
(1) Assemble the jack handle.
(2) Insert the jack handle end into the lowering screw.
(3) Turn the jack handle counterclockwise.
Refer to the Owner’s Manual for tire changing and jack positioning procedures.
31
SAFETY AND EMERGENCY FEATURES
After adjusting tire pressures, or after tires have been rotated or replaced, turn
the ignition switch to “ON” and press and hold the “ SET” button until indicator
blinks three times. Let the vehicle sit for a few minutes to allow initialization to
complete.
SAFETY AND EMERGENCY FEATURES
Smart Stop Technology (SST)
Star Safety SystemTM
Vehicle Stability Control (VSC)
VSC helps prevent loss of traction during cornering by reducing engine power and
applying brake force to selected wheels.
Toyota’s VSC monitors steering angle and the direction your vehicle is traveling.
When it senses that the front or rear wheels begin to lose traction, VSC reduces
engine power and applies braking to selected wheels. This helps restore traction
and vehicle control.
Traction Control (TRAC)
VSC helps prevent loss of traction during cornering by reducing engine power, and
Traction Control helps maintain traction on loose gravel and wet, icy, or uneven
surfaces by applying brake force to the spinning wheel(s).
Anti-Lock Brake System (ABS)
ABS helps prevent brakes from locking up by “pulsing” brake pressure to each
wheel. This limits brake lockup and helps provide directional control for the
current road conditions.
Toyota’s ABS sensors detect which wheels are locking up and limits wheel lockup
by “pulsing” each wheel’s brakes independently. Pulsing releases brake pressure
repeatedly for fractions of a second. This helps the tires attain the traction that
current road conditions will allow, helping you to stay in directional control.
SST engages when the accelerator is depressed first and the brakes are applied
firmly for longer than one-half second at speeds greater than five miles per hour.
SST doesn’t engage if the brake pedal is depressed before the accelerator pedal,
allowing vehicles to start on a steep hill and safely accelerate without rolling
backward.
Trailer Sway Control
Trailer sway may occur when towing a trailer due to strong crosswinds, uneven
and/or winding road conditions or the driver’s steering input.
Trailer Sway Control uses sensors to detect trailer sway and then simultaneously
and automatically helps to suppress the swaying motion of the trailer by
integrating brake and engine torque control to optimally reduce speed and to help
quickly control the swaying motion of the trailer.
Floor mat installation
There are two types of Toyota floor mats: carpeted and all-weather. Each vehicle
has model-specific floor mats. Installation is easy.
To keep your floor mat properly positioned, follow these steps:
• Only use floor mats designed for your specific model.
• Use only one floor mat at a time, using the retaining hooks to keep the mat in
place.
• Install floor mats right side up.
Always align the Δ marks
Electronic Brake Force Distribution (EBD)
SAFETY AND EMERGENCY FEATURES
Toyota’s ABS technology has Electronic Brake-force Distribution (EBD) to help
maintain control and balance when braking. Abrupt stops can cause a vehicle
to tilt forward, reducing the braking power of the rear wheels. EBD responds to
sudden stops by redistributing brake force to enhance the braking effectiveness of
all four wheels.
Brake Assist (BA)
Brake Assist is designed to detect sudden or “panic” braking, and then add braking
pressure to help decrease the vehicle’s stopping distance. When there’s only a
split second to react, Brake Assist can add additional brake pressure more quickly
than just the driver alone can.
32
FEATURES/OPERATIONS
Toyota’s TRAC sensors are activated when one of the drive wheels starts to slip.
TRAC limits engine output and applies the brakes to the spinning wheel. This
transfers power to the wheels that still have traction to help keep you on track.
Smart Stop Technology automatically reduces driving torque when the accelerator
and brake pedals are pressed simultaneously under certain conditions.
OVERVIEW
All new Toyota vehicles come standard with the Star Safety SystemTM, which
combines Vehicle Stability Control (VSC), Traction Control (TRAC), Anti-lock
Braking System (ABS), Electronic Brake-force Distribution (EBD), Brake Assist (BA)
and Smart Stop Technology (SST).
33
NOTES
BLUETOOTH® DEVICE PAIRING
SECTION
34
35
BLUETOOTH® DEVICE PAIRING
To begin the Bluetooth® Pairing process, press the HOME button on the
faceplate of your Toyota Vehicle Entune™ Multimedia Head Unit.1
Bluetooth® Pairing for Android® phone
and Entune™ touch screen system
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Android mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection.2
STEP 6
Initiate
Bluetooth®
STEP 1
From your APPS
SCREEN, select
SETTINGS
on your
Android®
STEP 2
Select
CONNECTIONS and
select BLUETOOTH
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Select YOUR PHONE
DEVICE to make it
discoverable.
Phone will seek out
Bluetooth devices while
remaining discoverable.
STEP 5
While your Android device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
1 To determine which head unit is installed in your vehicle, refer to page 22.
2 Some Android devices may have slightly different SETTINGS screen layout depending on manufacturer of
device and Android OS version.
36
Select ADD, to add your
phone device
37
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit (continued)
Bluetooth® Pairing for iPhone® and
Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all iPhone mobile digital devices have Bluetooth integrated; all you have to
do is setup the phone and multimedia system to “talk” to each other and form a
connection. Bluetooth Pairing Guide for select 2014 models.
Initiate Bluetooth® on your iPhone®
STEP 12
STEP 13
Using your smartphone, you
will need to allow Entune
access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
It is recommended to check the
“Don’t ask again” box, so as not
to have to press OK every time the
phone makes a Bluetooth connection
with your Toyota
STEP 1
From the HOME
SCREEN, select
SETTINGS
Additional Resources
STEP 2
Select BLUETOOTH
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Your iPhone will seek
out Bluetooth devices
while remaining
discoverable
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
STEP 5
Your Toyota Owner’s Manual
Located in the vehicle glovebox
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
Toyota Customer
Experience Center
(800) 331-4331
CONTINUE ON THE NEXT PAGE...
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
38
39
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Once you have Bluetooth enabled on your phone and ready to pair, you will need
to initiate Bluetooth on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
STEP 6
Select SETUP BUTTON on the
Home Screen.
STEP 7
STEP 8
Select BLUETOOTH
Select ADD, to add your
phone device
STEP 12
STEP 13
Using your smartphone, you may need to
allow Entune access to your messaging
and contacts
A confirmation will
appear once your phone
has been paired and
connected.
Only current iPhone text messages can be viewed on
the head unit. iPhone does not allow text message
reply.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
STEP 9
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
STEP 10
STEP 11
Your smartphone is now
paired with Entune.
You may need to enter the provided
Bluetooth PIN on your phone.
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
40
41
BLUETOOTH® DEVICE PAIRING
Initiate Bluetooth® on your Entune™ Multimedia Head Unit
Bluetooth® Pairing for Windows Phone® and Entune™ touch screen system
Pairing your phone is the first step in connecting with your Toyota for hands-free
calling and for audio streaming via Bluetooth. This pairing process is quick and
easy: all Windows Phone mobile digital devices have Bluetooth integrated; all you
have to do is setup the phone and multimedia system to “talk” to each other and
form a connection. Bluetooth Pairing Guide for select 2014 models.
Once you have Bluetooth® enabled on your phone and ready to pair, you will need
to initiate Bluetooth® on your Entune head unit. Please follow the instructions
below to pair your Bluetooth enabled phone to your Entune system.
Initiate Bluetooth® on your Windows Phone®
STEP 6
On your Toyota Vehicle
Entune Multimedia Head Unit,
Select SETUP BUTTON on the
Home Screen.
STEP 1
From your APP LIST,
select SETTINGS
STEP 2
Select BLUETOOTH
42
STEP 3
STEP 4
Ensure
BLUETOOTH
is ON
Phone will seek out
Bluetooth devices
while remaining
discoverable
STEP 5
STEP 9
While your iPhone device is seeking
out Bluetooth devices, proceed to
your Entune Multimedia Head Unit on
your Toyota vehicle.
Back on your smartphone,
you can now select your
TOYOTA VEHICLE in
Bluetooth Settings.
CONTINUE ON THE NEXT PAGE...
You may need to enter the provided
Bluetooth PIN on your phone.
STEP 7
STEP 8
Select BLUETOOTH
STEP 10
Select ADD, to add your
phone device
STEP 11
Your smartphone is now
paired with Entune.
43
Once paired, Entune will
attempt to connect audio and
contacts on your phone.
BLUETOOTH® DEVICE PAIRING
NOTES
Initiate Bluetooth® on your Entune™ Multimedia Head Unit (continued)
STEP 12
STEP 13
Using your smartphone,
you may need to allow
Entune access to your
contacts
A confirmation will
appear that your phone
has been paired and
connected.
Additional Resources
If you’re having trouble pairing your phone, Toyota has you covered. You can get
more information from the following sources:
Online Pairing Guide:
www.toyota.com/connect
Your Toyota Owner’s Manual
Located in the vehicle glovebox
Toyota Customer
Experience Center
(800) 331-4331
Disclosures
This brochure is accurate at the time of print; content subject to change based on periodic multimedia software updates.
1. Concentrating on the road should always be your first priority while driving. Do not use the hands-free phone system if it will distract you.
2. The Bluetooth word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Toyota is under license. A compatible Bluetooth enabled phone must first be paired. Phone performance depends on software, coverage & carrier.
3. Android is a trademark of Google, Inc. All rights reserved. Google is not a participant in or sponsor of this promotion.
4. Apps/services vary by phone/carrier; functionality depends on many factors. Select apps use large amounts of data; you are responsible for charges. Apps & services subject to change. See Toyota.com/entune for details.
5. Bluetooth Pairing Guide for select 2014 models.
44
45
NOTES
00505-QRG14-TUN
Printed in the USA 8/13
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement