XLC127DVX and XLCi127DVX - Electro

XLC127DVX and XLCi127DVX - Electro
Electro-Voice | XLC127DVX and XLCi127DVX
XLC127DVX and
XLCi127DVX
▪ Accurate Vertical Control and Coverage
▪ Compact and Lightweight
XLC
▪ True 3-way Design
▪ 120° Horizontal Full-Range Line-Array
▪ Quik-Rig or Fixed Installation Rigging
XLCi
The XLC family is designed to provide the highest
quality performance for a variety of applications. It is
comprised of two full-range systems; XLC127DVX
(120° line-array element), XLC907DVX (90° line-array
element), and one subwoofer; XLC215. The
XLC127DVX uses a DVX3121A, two DVN2065
neodymium midrange transducers, and two ND6 high
frequency transducers. The DVX3121A is a high
performance low frequency transducer with forced air,
directional voice coil cooling for high power and
efficiency. The suspension and magnetic circuit were
optimized for long, linear travel to provide low
distortion and greater LF extension in a lightweight
transducer. The DVN2065 transducer utilizes
neodymium to provide very high output with
lightweight and lower distortion. The 3-way design is
comprised of a 12" vented LF, 2 x 6.5" MF transducers
on a 120° horizontal waveguide, and 2 x 3" HF
transducers combining through Hydras on a 120° x 7°
waveguide. It can be used in tri-amp mode or bi-amp
3-way using the optional sophisticated internal 24 dB/
octave passive MF to HF network. The asymmetrical
box design was optimized to produce a symmetrical
polar pattern with a uniform power response.
Designed for use in groups of four or more the
XLC127DVX delivers predictability and control.
Combined with an advanced integrated rigging system,
one-man installations are a reality. XLC systems can
also be ground stacked. Ideal for applications ranging
from live reinforcement to performing arts venues to
houses of worship, to sports facilities, XLC can deliver
unprecedented performance, particularly in difficult
acoustical environments. LAPS modeling software
provides quick, accurate results for array
configurations and rigging information.
Technical specifications
Freq. Response (-3 dB):
65 Hz-18 kHz1
Freq. Range (-10 dB):
50 Hz-20 kHz1
Max Calculated SPL:
Horizontial Coverage:
Vertical Coverage:
Rigging:
(Both Types)
144 dB Cont., 150 dB Peak1
120°
Array Dependent, Software Definable
Fully Captive Aluminum, 1° increments,
16 elements with 8 to 1 Safety Factor
LF Power Handling:
500 W Cont., 2000 W Peak
MB Power Handling:
300 W Cont., 1200 W Peak
HF Power Handling:
150 W Cont., 600 W Peak
Sensitivity (LF/MB/HF):
95/101/111 dB
LF to MB Crossover
Frequency:
500 Hz
MB to HF Crossover
Frequency:
1600 Hz (Passive or Active)
2 | XLC127DVX and XLCi127DVX
LF Passband:
1 x 12" DVX3121A, 8 ohm
MB Passband:
2 x 6.5" DVN2065, 8 ohms
HF Passband:
2 x ND6A-16, 8 ohms
Enclosure:
Grille:
Enviromental
Specification:
Dimensions (H x W x D):
22.50 in
[571 mm]
2 x NL8
13-ply birch plywood with EVCoat
XLC-127DVX: 39.00 in [991 mm]
XLCi-127DVX: 36.50 in [927 mm]
Zinc plated steel with powdercoat paint
IEC 529 IP24, MIL 810
14.25 in
[362 mm]
Quik-Rig: 14.25 in x 39 in x 22.5 in
(362 mm x 990 mm x 572 mm)
Install: 14.25 in x 36.5 in x 22.5 in
(362 mm x 927 mm x 572 mm)
Net Weight:
Quik-Rig:110 lb (49.9 kg)
Install: 105 lb (48.1 kg)
Shipping Weight:
Quik-Rig: 115 lb (52.2 kg)
Install: 110 lb (49.9 kg)
Full-space measurement of 4 elements HF section
calculated to 1m.
1
System overview
Block Diagram:
Tri-amp only. For Bi-amp operation an accessory
network kit can be purchased separately.
11.02 in
[280 mm]
Notice!
Quik-Rig Loudspeaker shown.
All dimensions for Install version equal to
Quik-Rig version except where shown.
Beamwidth:
Horizontal Beamwidth
-6dB Beamwidth (degrees)
Connectors:
Dimensions:
100
1000
10000
Frequency (Hz)
Impedance:
INPUT
LF
Compatible System Solutions, Electronics:
Connection Chart
(Pins 1 Pass Through)
CP3000S Precision Series Power Amplifier
Triamp
CP4000S Precision Series Power Amplifier
LF:
Pins 2
TG5/TG7 Tour Grade Power Amplifiers
MB:
Pins 3
Dx46 Digital Sound System Controller
HF:
Pins 4
Compatible System Solutions, Touring versions:
XLC907DVX 90° Full-Range Line Array Element
XLC215 Dual 15” Subwoofer Loudspeaker System
20000
3 | XLC127DVX and XLCi127DVX
Compatible System Solutions, Install Versions:
XLCi215 Dual 15” Subwoofer Install Loudspeaker System
Ordering information
XLC127DVX
3-way cabinet, 120°, DVX3121A, DVN2065, ND6A-16,
tri-amp, inc. flying hardware. Available in Europe,
Africa, and the Middle East only.
Order number EV-XLC127DVX
XLC127DVX
3-way cabinet, 120°, DVX3121A, DVN2065, ND6A-16,
tri-amp, inc. flying hardware.
Order number XLC127DVX@L
XLCi127DVX-BLK
XLC127DVX for permanent installation; black
Order number XLCI127DVX@L
XLCi127DVX-WHT
XLC127DVX for permanent installation, white
Order number XLCI127DVXWHTLB
Accessories
XFD127 DOLLY
XFD127 Dolly, front for XLC127 and XLC907 concert
series, pair
Order number XFD127_WSP
XLC BD
XBD, Dolly, XLC concert series, 4 tall, aluminum
Order number XLC BD_GLN
XLC-GRID-B1
Grid for concert/portable XLC cabinets
Order number XLC-GRID-B1_GLN
XLCI-GRID-B2
Grid for XLCI-DVX install cabinets supports up to 16
cabinets
Order number XLCI-GRID-B2_GLN
XO-127DVX
Crossover retrofit kit for XLC/XLCi127DVX
Order number XO-127DVX-LB
Represented by:
Germany:
Bosch Sicherheitssysteme GmbH
Robert-Bosch-Ring 5
85630 Grasbrunn
Germany
Bosch Security Systems, Inc.
12000 Portland Avenue South
Burnsville MN 55337
USA
www.electrovoice.com
© Bosch Security Systems 2016 | Data subject to change without notice
Document Number F.01U.317.783 | Vs1 | 06. Oct 2016
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising