SINGLE PACKAGE VERTICAL AIR CONDITIONERS

SINGLE PACKAGE VERTICAL AIR CONDITIONERS
SINGLE PACKAGE
VERTICAL AIR CONDITIONERS
THE EXPERTS IN ROOM AIR CONDITIONING
BETTER
AESTHETICS
OUTDOORS
TOTALLY
CONCEALED
INSTALLATION
Friedrich Vert-I-Pak air
conditioners provide a more
homelike appearance and a
unique ‘floating chassis’ design
for quiet operation.
®
Packaged unit eliminates the clutter
of outdoor condensing units and the
sleek architectural grille is available in
custom colors to match the building’s
exterior.
A quiet and energy efficient option for extended stay properties, suites,
assisted living, student housing, and commercial spaces.
Vert-I-Pak® is a superior product
What you’ll find on
Friedrich Vert-I-Pak
2
®
1.
Chassis installs into a wall plenum and is held
firmly in place by a sealing gasket, reducing noise
from vibration transfer.
2.
½ inch foil-backed insulation added on the inside of
the chassis to reduce sound transmission into the
guest room.
3.
Extra thick, vibration-absorbing rubber grommets
mounted on durable base that is engineered for
structural and acoustic integrity.
4.
Dynamically balanced blower with large, vibrationabsorbing motor mounts for smooth and quiet
operation.
5.
Patented telescoping plenums (accessory) easily
adapt to more installations.
6.
5 year limited warranty includes labor.
What you'll find on many competitor's
products
1.
Chassis is screwed into the wall plenum. Metalon-metal contact transfers vibration, increasing
operating noise under typical conditions. Noise is
transferred through the walls and into the room.
2.
No insulation on the unit to reduce noise
transmission into the guest room.
3.
Hard plastic feet on the unit base which are less
durable and transfer harsh vibration noise.
4.
Different plenums needed based on varying wall
depths.
5.
No labor warranty.
3
FRIEDRICH ENGINEERED FOR QUIETER PERFORMANCE
With the aesthetics of a central air system and the simplicity of a PTAC.
Friedrich’s unique ‘Free Floating’ chassis design
The chassis slides into the wall plenum and a gasket firmly seals the chassis to the patented
telescoping plenum. This eliminates vibration noises that are transmitted into the room in
competitor’s metal-on-metal fixed installations.
A better heating and cooling option inside and out
A better choice than whole
building solutions
• Eliminates the clutter of outdoor
condensing units and the need for
vandalism barriers.
ADVANTAGES INCLUDE:
Vert-I-Pak®
COOLING
8600-17000 Btu
Up to 10.5 EER
ELECTRIC HEAT
AND HEAT PUMPS
• Lower installed cost
• Independent metering (no need to
prorate for multitenant applications)
• Completely self-contained
• No refrigerant lines running from
floor to floor
3.0 COP
HEAT PUMPS
• Individual temperature set point
(one unit can heat and others can
cool)
• Fast, easy replacement keeps
spaces livable
Vert-I-Pak®
COOLING
23000 Btu
Up to 9.5 EER
• Less risk, with a whole building
system spaces may become
uninhabitable until the system is
repaired or replaced
Improved guest comfort
• Vert-I-Paks can be easily accessed
for maintenance or replacement
• Individually controlled
• Heat and cool
Installs in a small mechanical
closet and can be ducted to
multiple rooms.
• Duct air specifically where it’s
needed, not just on the outside wall
Foil-backed insulation blanket
inside the cabinet reduces sound
transmitted into the guest room
Reliable and durable
Easy installation
• PSC permanently lubricated motor
for low maintenance and maximum
efficiency
• Can be installed from any interior side
(front, right or left)
• Engineered drain pan won’t rust,
eliminating the risk of unsightly rust
stains from condensation on the
building exterior
• Standard safety power disconnect
• Electronic control panel on unit for
easy diagnostics and servicing
• 100% run tested prior to shipmentEvery unit is tested in every
operating mode before it ships for
optimal performance and reliability
• Compact and lightweight, weighs as little
as 125 lbs.
• Ductable to multiple rooms
• All units are ready to install with only
electrical hook up needed to be up and
running
• Central desk control ready
• 24-volt remote wireless or wired
thermostat ready
• Prewired, charged and piped
• 2-speed fan with constant fan option
Typical Vert-I-Pak® installation
• Primary condensate removal system
provided thru 3/4” pipe fittings for more
placement options
• Secondary overflow from primary drain*
Energy management thermostats
available (wired & wireless)
Rigid Ductwork
Field-supplied
Filter (25" x 20")
• Integrated occupancy sensor
58"
• Auto changeover
Exterior Wall
• 5 distinct energy presets
Flexible Ductwork
• Unique energy savings features
• Comprehensive remote management
capability**
• Patented telescoping wall plenums
adjust to fit varying exterior wall
thicknesses
• All units are shipped (on pallet) with
return air filter
• Rear or side wall sleeves
4
3.0 COP
HEAT PUMP
• Easy installation; does not require an
HVAC technician
• 10” crimped and beaded duct-collar
ready to attach flex duct
Protects the outdoor coil against
deterioration and extends the life of
the unit especially in harsh coastal
environments.
ELECTRIC HEAT
AND HEAT PUMP
• Condensate removal system uses slinger
ring technology to cool the coil and
increase efficiency
* 24000 Btu model uses secondary gravity-fed drain
** Energy management capability requires purchase of additional hardware and service fee
VPAWP1-8/1-14 Wall Plenum
Power
Disconnect
Plenum
Divider
29"
VPRG4 Access Panel &
Return Air Filter Grille
ACCESS DOOR OR PANEL
TO CLOSET CAN BE
INSTALLED FROM 3 SIDES
Optional field
installed drain pan
(refer to local codes)
Optional Platform
3" Clearance on all
three sides minimum for
service and installation
Chassis is
shipped with
vibration
isolators
installed
VPDP1 drain pan beneath
unit is required on all
VEA/VHA24 units. Drain
pan must be installed prior
to chassis installation
5
EASILY REPLACE OLDER FIRST COMPANY VERTICAL UNITS
Exact fit in existing First Company SPXR-series single package vertical unit
OPTIONAL ACCESSORIES
ARCHITECTURAL LOUVER
VPAL2 and VPSC2
Extruded aluminum grille that attaches to the outdoor section of the wall
plenum. Takes in fresh air and returns condensed air. VPSC2 can be ordered
in custom colors.
Easy upgrade for
owners of older,
inefficient First
Company units
DIMENSIONS: 25 9/16" W x 31 1/16" H
Vert-I-Pak® advantages
• Superior warranty: 5-yr.
PARTS and LABOR warranty
• Higher efficiencies
• Quieter operation
• Certified by AHRI
• Diamonblue Advanced
Corrosion Protection®
standard on the coil
EXACT FIT
to First
Company
sleeve
SINGLEPIECE welded
adapter
for a rigid
installation
EASY
CONNECTION
to Friedrich
chassis
NO EXPENSIVE
CUTTING or
RE-SIZING
of wall opening
necessary
WALL PLENUM
VPAWP1-8, VPAWP1-14
Two-part sleeve that telescopes in and out. Sits inside the exterior wall
penetration.
VPAWP1-8 telescopes from 5 1/2”–8”
VPAWP1-14 telescopes from 8”–14”
DIMENSIONS: 24 1/8” W x 30 3/8” H
CUTOUT DIMENSIONS: 24 5/8” W x 30 7/8” H
RETURN AIR GRILLE/
ACCESS PANEL
VPRG4
Hinged panel allows access to unit and return air filter. A field-supplied filter (25” x 20”) should be mounted on the inside grille.
Panel can be mounted with return air openings high or low on the door for
optimum sound attenuation.
• Every unit run-tested before
it ships
DIMENSIONS: 29” W x 58” H
CUTOUT DIMENSIONS: 27” W x 55 3/4” H
FIRST COMPANY SLEEVE ADAPTER
Save on energy costs with higher efficiency Vert-I-Pak® units*
First
Company
Friedrich
Friedrich Vert-I-Pak
9,000 Btu A/C
10.5 EER
9.0 EER
12,000 Btu A/C
9.8 EER
9.0 EER
18,000 Btu A/C
9.0 EER
9.0 EER
24,000 Btu A/C
9.5 EER
9.0 EER
9,000 Btu HP
10.5 EER
9.0 EER
12,000 Btu HP
9.7 EER
9.0 EER
VPASA1
Single piece, welded adapter allows retrofit into existing First Company
SPXR-series single package vertical unit wall sleeve and louver. Easy
connection to Friedrich chassis.
SINGLE STAGE THERMOSTATS
RT6
Single stage, wall-mounted digital thermostat with two fan speeds and
backlight for control of Friedrich VERT-I-PAK.
WRT1
Wireless, single stage, wall-mounted digital thermostat with two fan speeds
and backlight for control of Friedrich VERT-I-PAK.
ENERGY MANAGEMENT THERMOSTATS
EMRT1
18,000 Btu HP
9.1 EER
9.0 EER
Wired thermostat with occupancy sensor.
24,000 Btu HP
9.1 EER
9.0 EER
EMWRT1
Wireless thermostat with occupancy sensor.
Replaces First Company
SPXR Series
EMOCTEMRAF
Online connection kit.
Remote access fee.
DRAIN PAN
Closet dimensional limitations apply.
Sleeve adapter kit includes all parts necessary to mate with First Company sleeve.
Condensate drain connections, supply duct connections, and electrical connections remain the responsibility of equipment owner.
6
RT6WRT1
EMRT1, EMWRT1
VPDP1
For VEA/VHA24 models. May be installed prior to chassis for easy installation/
removal.
7
SPECIFICATIONS
Model
VEA09K
VEA12K
VEA18K
VEA24K
VHA09K
VHA09R
VHA12K
VHA12R
VHA18K
VHA24K
23000/22700
9000/8600
8900
11500/11200
12000
17000/16800
23000/22800
COOLING DATA
COOLING Btu
9000/8600 11500/11200 17000/16500
POWER (W)
857/819
1174/1143
1889/1833
2421/2389
857/819
908
1186/1155
1224
1868/1846
2527/2505
EER
10.5/10.5
9.8/9.8
9.0/9.0
9.5/9.5
10.5/10.5
9.8
9.7/9.7
9.8
9.1/9.1
9.1/9.1
0.70
0.70
0.74
0.74
0.74
0.72
0.70
0.70
SENSIBLE HEAT RATIO
0.74
0.74
2.5/3.4/5.0
2.5/3.4/5.0
HEATING Btu
—
—
—
—
COP @ 47F
—
—
—
—
3.0/3.0
3.0
3.0/3.0
3.0
3.0/3.0
3.0/3.0
HEATING POWER (W)
—
—
—
—
801/782
850
1055/1035
1123
1560/1540
1953/1953
HEATING CURRENT (A)
—
—
—
—
3.6/3.9
3.4
4.5/4.7
4.4
7.5/8.2
8.5/9.4
HEATER SIZE
2.5/3.4/5.0 2.5/3.4/5.0/7.5/10.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0 2.5/3.4/5.0/7.5/10.0
HEAT PUMP DATA
8200/8000
8700
10800/10600
11500
16000/15000
20000/20000
ELECTRICAL DATA
VOLTAGE (1 PHASE, 60 Hz)
230/208
230/208
230/208
230/208
230/208
265
230/208
265
230/208
230/208
VOLT RANGE
253-197
253-197
253-197
253-197
253-197
253-198
253-197
253-198
253-197
253-197
COOLING CURRENT (A)
4.0/4.3
5.2/5.4
8.1/8.6
10.0/10.4
4.0/4.3
3.6
5.3/5.5
5.0
8.2/8.6
10.6/10.9
AMPS L.R
21.0
29.5
42.0
46
21.0
16.5
29.5
23.5
42.0
46.0
AMPS F.L.
3.5
4.5
7.8
9.5
3.5
3.1
5.0
4.3
7.8
9.5
INDOOR MOTOR (HP)
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
1/4
INDOOR MOTOR (A)
1.2
1.2
1.2
1.94
1.2
1.08
1.2
1.08
1.2
1.94
OUTDOOR MOTOR (HP)
—
—
—
1/4
—
—
—
—
—
1/4
OUTDOOR MOTOR (A)
—
—
—
0.85
—
—
—
—
—
0.85
PHYSICAL
DIMENSIONS (W x D x H)
23”x23”x32” 23”x23”x32” 23”x23”x32”
23”x23”x47”
23”x23”x32” 23x23x32 23”x23”x32” 23x23x32 23”x23”x32”
23”x23”x47”
NET WEIGHT (LBS)
114
124
144
167
114
114
125
124
144
167
SHIPPING WEIGHT (LBS)
125
135
155
220
125
125
135
135
155
220
TEST SETTING
Low
Low
High
Low
Low
Low
Low
Low
High
Low
R410A CHARGE (OZ)
41.5
32
48.1
65
38
39
39
37
48
65
AIRFLOW DATA
INDOOR CFM*
Low High Low High Low High
Low
High
Low High Low High Low
High Low High Low High
Low
High
.10” ESP.10” ESP
405
450
420
450
400
480
610
700
420
450
420 450
420
450
420 450
400
480
610
700
.15” ESP.10” ESP
375
420
405
425
375
465
585
670
405
425
405 425
405
425
405 425
375
465
585
670
.20” ESP.10” ESP
345
385
385
400
350
450
560
640
385
400
385 400
385
400
385 400
350
450
560
640
.25” ESP.10” ESP
325
365
355
375
330
390
535
610
355
375
355 375
355
375
355 375
330
390
535
610
.30” ESP.10” ESP
305
340
320
350
310
330
510
580
320
350
320 350
320
350
320 350
310
330
510
VENT CFM
60
60
60
60
60
60
60
60
60
NOTES:
Cooling Standards: 95°F DB/75°F WB outdoor, 80°F DB/67°F WB indoor
Heating Standards: 47°F DB/43°F WB outdoor, 70°F DB/60°F WB indoor
Normal Value Wet Coil @ .1” ESP.
Rated CFM at Low Speed: VEA09/VHA09….325 VHA12/VEA12….390
VHA24….610
VEA18/VHA18….400
VEA24/
Due to continuing research in new energy-saving technology, specifications are subject to change without notice.
Friedrich Air Conditioning Co. l 10001 Reunion Place, Suite 500 l San Antonio, TX 78216 l 877.599.5665
www.friedrich.com
Commercial_VERT-I-PAK_Brochure_2014 (10-14)
Printed in USA
580
60
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement