Easy. Easier. Mhouse. - Sungate e-Pood

Easy. Easier. Mhouse. - Sungate e-Pood
Easy.
Easier.
Mhouse.
The revolutionary system
for automating your home
in an incredibly quick
and easy way.
Now even with
solar energy supply.
LAR POWER
SO
Mhouse
self fit Kit:
everything’s easy,
everything’s included!
Mhouse has developed a leading-edge
range of products combining a complete
set of functions, ease of installation
and use, and expandability towards
home automation applications.
Find out more about this revolutionary
self fit kit system for automating gates,
garage doors, awnings and rolling shutters
in an incredibly quick and easy way.
Control
of the home
by a simple
click!
Alarm System
Alarm systems and integrated management
of automations, all in one unit.
With a single Mhouse transmitter,
the alarm systems and automations for gates,
garage, awnings and rolling shutters,
as well as lighting, are always under control.
Swing gates
surface-mounted,
or underground
installation
Sliding gates
Sectional
or up-and-over
doors
Mhouse:
when less is better!
Mhouse constitutes a single pack containing
all that’s needed for easy to install automations
with professional results.
The exclusive, highly refined and practical Mhouse
accessories complete the automation, personalising
it according to the diverse requirements of the user.
4 Mhouse
Lighting and irrigation
systems
Maximum safety
with low voltage connections
and automatic detection of obstacles.
Rolling shutters,
solar screens,
awnings
Just two wires!
The ECSBus system connects
all devices with just 2 wires:
thanks to no need for observing polarity,
there is no risk of errors.
Mhouse 5
The freedom
of an ecological
and wireless
system
Style and
substance
PF is a new solar power kit for the automation
of swing or sliding gates, installable anywhere,
with no excavation work or connections.
An intelligent and ecological choice!
Mhouse has created a perfect
Italian-style line of products characterised
by careful, efficient design, so distinctive
as to be always recognizable.
6 Mhouse
A good design is the basis of quality.
Mhouse’s awareness to achieve the finest
results is revealed in every detail:
cutting-edge technology, high quality
materials, accurate finish.
Mhouse 7
Index
10/11
36/39
PF kit
Solar power kit for swing
and sliding gate automations.
RM15 - RM30 - RM45
RME15N - RME30N- RME45N
Kit for rolling shutter
or awning automation,
with or with-out
built-in control unit and receiver.
solar power system
12/25
for swing gates
Kit for automating a pedestrian gate (WT1S, WG10S);
or a two-leaf residential gate
(WT2S, WS2S, WG2S, WG20S).
Innovative installation
under the leaf (WU2S).
26/29
for sliding gates
SL1S, SL10S
Kits for the automation
of a sliding gate.
for shutters and sun awnings
40
awnings
and rolling shutters
radiocontrol kit
RT3N
Kit easy to install
to radio control
any rolling shutter, awning
or rolling garage door.
41
kit to control lighting
and irrigation systems
RC2
The receiver allows
to control at a distance lighting,
irrigation and alarm systems.
30/35
42/47
GD0N, GD1N, GD10N
Kits for the automation of a sectional door
and up-and-over doors.
Miniaturized transmitters, flashing light,
autosynchronized photocells and switches.
for garage doors
accessories
Each Kit PF contains:
1 PB Box for 24 V 20 Ah
battery, with carry handle.
Dim. 23.5 x 25.8 x 17 cm.
Luminous and acoustic
signals to indicate
battery charge status.
1 PC Photovoltaic solar
panel 10 W, for 24 V
power supply.
Dim. 36.7 x 28.5 cm;
brackets included.
Optional accessories:
PBC Battery charger
power supply unit, for PF.
Solar power system
for gate automations
Installation
Packaging characteristics
Swing gates, surface mounted
PF kit
MhouseKit PF uses solar energy, replacing
the electrical mains as the source of power
for automating a gate, even if located far
from the electrical mains, with no need for
excavations for necessary connections.
The battery, recharged by the solar panel*,
provides a reserve of energy for a great
number of manoeuvres.
*rechargeable also via the power mains,
using the optional power supply unit PBC.
Package dimensions (mm)
Package weight (kg)
EAN code
410x255x330
14
8032595791768
The content of the package may vary: consult the retailer.
For updated and complete information, consult the product technical manual.
Installable anywhere
without the need for excavations
or connections to the electrical mains,
even in locations far away or difficult
to access.
Economical and ecological
thanks to solar energy, free and clean:
an ecological and intelligent choice
with short term benefits.
Low consumption with no risk
of blackouts
The energy reserve levels, combined
with low consumption of the automations,
guarantee operation even in prolonged
overcast weather conditions.
Auxiliary power supply, which allows
a quick battery recharge through
230 V electric system as an alternative
to the photovoltaic module.
Solar panel
link
Rear bearing for wall
or column hanging
Swing gates, underground installation
Sliding gates
Motor link
Carry handle
Battery charger
power supply unit,
(optional)
10 Mhouse
Mhouse 11
Each Kit WT1S contains:
es
Fo
ccessori
ra
new
design
Optional accessories
dy
Rea to
1 WT1SC Electromechanical
gear motor with integrated
control unit and 433.92 MHz
variable code receiver.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
FL100 Adjustable flashing
light, with built-in aerial.
EL1 12 V electric lock
interface.
PR2 Buffer battery
for emergency power
supply.
DS1 13-key digital switch
with programmable code,
via radio.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
PT50 Two 485 mm high
posts including one pair of
photocells.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Fast and ultra-compact, even
in the presence of small columns
Technical characteristics
Installation
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (degrees/sec)
Protection class (IP)
Weight (kg)
Certification
WT1S kit
Kit for automating a pedestrian gate up to 1.6 m in width
and 100 kg weight. Particularly suitable for wood and PVC gates.
230
70
120
13
44
4.3
For updated and complete information, consult the product technical manual.
Packaging characteristics
New:
Ultra-compact: ideal for pedestrian
gates even with small size columns
(10 cm width).
The smooth and precise movements
mean that even gates with a delicate
structure can be automated.
Auto-programming: WT1S automatically
calculates the most suitable operating
parameters for each gate.
Safe: due to the irreversible motor
and the anti-shear arm.
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Practical: the articulated arm allows
for installation in special conditions
such as the presence of walls
or obstacles adjacent to the column.
No waiting in front of the gate:
only 7 seconds to open and close
(in perfect installation conditions, making the most
of the whole run and with a 90° opening).
Convenient: the motor bracket can be rotated
so as to assure improved fixing to low-strength
supports such as brick columns.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection feature.
12 Mhouse
Modular control card
with integrated receiver
- Timed and adjustable automatic
closing function
- Programming of new transmitters
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Package dimensions (mm)
Package weight (kg)
Palletization (pz)
EAN Code
min. 80 mm
min 300
max. 300
max. 230
max 300 mm
max 230
max 110°
max. 90°
125,5
90
min. 80
min 80
min. 100
Quick motor release
for manual gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
600x400x190
5.5
24
8032595792338
The content of the package may vary: consult the retailer.
384 mm
New Design for the accessories.
Precise: due to the closure
mechanical stop integrated into the arm
(with whole-arm installation).
min 100
384 mm
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need
for connections to the electrical mains,
even in locations far away
or difficult to access.
90
125,5
Mhouse 13
Each Kit WT2S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
1 WT1SC Electromechanical
gear motor with integrated
control unit and 433.92 MHz
variable code receiver.
1 WT1SK Electromechanical gear
motor without control unit.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable
flashing light, with
built-in aerial.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
For two-leaf gate, even
in the presence of small columns
DS1 13-key digital switch
with programmable code,
via radio.
Installation
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (degrees/sec)
Protection class (IP)
Weight (kg)
Certification
Kit for automating a two-leaf residential gate
with each leaf up to 1.6 m in width and 100 kg weight.
Especially suitable for wood or PVC gates.
Packaging characteristics
The smooth and precise movements
mean that even gates with a delicate
structure can be automated.
Precise: due to the closure
mechanical stop integrated into the arm
(with whole-arm installation).
Practical: the articulated arm allows
for installation in special conditions
such as the presence of walls
or obstacles adjacent to the column.
No waiting in front of the gate:
only 7 seconds to open and close
(in perfect installation conditions, making the most
of the whole run and with a 90° opening).
Convenient: the motor bracket
can be rotated so as to assure improved
fixing to low-strength supports such
as brick columns.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection feature.
Auto-programming: WT2S automatically
calculates the most suitable operating
parameters for each gate.
Package dimensions (mm)
Package weight (kg)
Palletization (pz)
EAN Code
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
min. 80 mm
min 300
max. 300
max. 230
max 300 mm
max 230
max 110°
max. 90°
125,5
90
min. 80
min 80
min. 100
min 100
Quick motor release
for manual gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
90
14 Mhouse
600x400x190
10
24
8032595792345
The content of the package may vary: consult the retailer.
384 mm
Safe: due to the irreversible motor
and the anti-shear arm.
384 mm
Ultra-compact: WT2S is ideal for gates
even with small size columns (10 cm width).
230
120
100
13
44
4.3
For updated and complete information, consult the product technical manual.
New:
New Design for accessories.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Technical characteristics
WT2S kit
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
PR2 Buffer battery
for emergency power
supply.
125,5
Mhouse 15
Each Kit WS2S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
1 WS1SC Electromechanical gear motor
with control unit for control of two motors
with integrated 433.92 MHz variable code receiver.
1 WS1SK Electromechanical gear motor
without control unit.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable
flashing light,
with built-in aerial.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
New curved anti-shear arms, three Mhouse release keys, opening
and closing mechanical stop and mounting plates included.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
Compact and elegant, also for large
posts and light structures
DS1 13-key digital switch
with programmable code,
via radio.
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (degrees/sec)
Protection class (IP)
Weight (kg)
Certification
Kit for automation of a residential two-leaf gate, each leaf
measuring up to 2.2 m in width and weighing up to 200 kg.
Especially suitable for wood or PVC gates.
Packaging characteristics
Precise: opening/closing
mechanical limit-switch.
No waiting in front of the gate:
only 10 seconds to open and close
(in perfect installation conditions, making the most
of the whole run and with a 90° opening).
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
Auto-programming: WS2S automatically
calculates the most suitable operating
parameters for each gate.
Autodiagnostic system
identifies and immediately signals any
connection errors or malfunctions.
Package dimensions (mm)
Package weight (kg)
Palletization (pz)
EAN Code
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
The content of the package may vary: consult the retailer.
Quick motor release for manual
gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
240
155
16 Mhouse
760x200x430
18
17
8032595792321
280
Compact and fast: WS2S is ideal for gates
with very deep pillars, which can be easily
operated thanks to its articulated arm.
Its smooth and precise movements make
it suitable for the most delicate gates.
230
100
360
11 ÷ 17
54
6.2
For updated and complete information, consult the product technical manual.
New:
New Design for accessories.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Technical characteristics
Installation
WS2S kit
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
PR1 Buffer battery
for emergency power
supply.
470 mm
Mhouse 17
Each Kit WU2S contains:
es
Fo
ccessori
ra
new
design
2O
Resista
IP67
2 WU1SK Electromechanical gear motors. 3 release
keys and foundation/mounting plate included.
nt
H
dy
Rea to
2 WUA Straight slotted arms.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable flashing
light, with built-in aerial.
1 CL2S External
control unit for control
of two WU1SK
electromechanical gear
motors with integrated
433.92 MHz variable
code receiver.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
PR1 Buffer battery
for emergency power
supply.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
Ultrathin, it can be fixed under the leaf
for minimum overall dimensions
DS1 13-key digital switch
with programmable code,
via radio.
Installation
Technical characteristics
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (degrees/sec)
Protection class (IP)
Weight (kg)
Certification
WU2S kit
Kit for automation of a residential two-leaf gate, each leaf measuring up to 1.8 m in width
and weighing up to 200 kg. The most discreet: the very reduced height of the motor (73.5 mm)
allows it to be installed between the gate leaf and the ground. By partially burying the motor,
the total clearance required is only 60 mm!
Packaging characteristics
Package dimensions (mm)
Package weight (kg)
Palletization (pz)
EAN Code
Simple and economic: with WU2S
no excavations or structural modifications
are needed in order to bury the motor
under the gate, so you won’t have
to spend money for masonry work.
Guaranteed IP67 water-tightness;
extremely sturdy casing made entirely
of die-cast sealed aluminium.
18 Mhouse
“Plug ’n Play” connections
very simple and quick, with easy
identification of wires and terminals.
Easy Connection System: ECSBus
system for connection of up to seven
pairs of photocells using only two wires.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
The content of the package may vary: consult the retailer.
73,5
(in perfect installation conditions, making the most
of the whole run and with a 90° opening).
Modular control card
with integrated receiver
· 2 speeds
· Timed and adjustable automatic
closing function
· Programming of new transmitters
(up to 150)
· Adjustable partial opening function
· Pause time adjustment
· Obstacle sensitivity adjustment
· Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
680x170x400
18.25
18
8032595792352
378 mm
230
New Design for accessories.
No waiting in front of the gate:
only 9 seconds to open and close
230
100
360
11 ÷ 17
67
7
For updated and complete information, consult the product technical manual.
New:
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Quick motor release for manual
gate operation.
Auto-programming: WU2S automatically
calculates the most suitable operating
parameters for each gate.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Small size foundation boxes,
included in the kit.
Mhouse 19
Each Kit WG2S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
2 WG1SK
Electromechanical
worm gear motor with
three Mhouse release
keys and adjustable
mounting brackets
included.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable flashing
light, with built-in aerial.
1 CL2S External
control unit for control
of two WU1SK
electromechanical gear
motors with integrated
433.92 MHz variable
code receiver.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
The strong solution, for swing gates
WG2S kit
DS1 13-key digital switch
with programmable code,
via radio.
PR1 Buffer battery
for emergency power
supply.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Technical characteristics
Installation
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (m/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
Kit for automation of a residential two-leaf gate, each leaf
measuring up to 2.2 m in width and weighing up to 250 kg.
230
100
1400
0.016 ÷ 0.022
390 (330)*
54
6
* Data with opening/closing limit switch between brackets
For updated and complete information, consult the product technical manual.
New:
New Design for accessories.
Strength and elegance: WG2S, with its
die-cast aluminium casing that will match
any style, can open the heaviest gates
without effort.
No welding required adjustable
multi-position brackets.
Easy Connection System: ECSBus
system for connection of up to seven
pairs of photocells using only two wires.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
Auto-programming: WG2S automatically
calculates the most suitable operating
parameters for each gate.
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
780x180x450
16.75
14
8032595792727
The content of the package may vary: consult the retailer.
Quick motor release
for manual gate operation.
729 mm
85
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
100
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
Packaging characteristics
20 Mhouse
Mhouse 21
Each Kit WG10S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
1 WG10SK
Electromechanical
worm gear motor with
three Mhouse release
keys and adjustable
mounting brackets
included.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable flashing
light, with built-in aerial.
CL20S External
control unit for
control of WG10SK
electromechanical gear
motor with integrated
433.92 MHz variable
code receiver.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
Simple and linear design,
for one-leaf swing gate opener
DS1 13-key digital switch
with programmable code,
via radio.
PR1 Buffer battery
for emergency power
supply.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Technical characteristics
Installation
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (m/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
WG10S kit
Kit for the automation of a residential one-leaf gate
measuring up to 4.5 m in width or weighing up to 450 kg.
230
90
1800
0,013 ÷ 0,024
540 (480)*
44
10
* Data with opening/closing limit switch between brackets
For updated and complete information, consult the product technical manual.
New:
New Design for accessories.
Strength and elegance: WG10S, with its
die-cast aluminium casing that will match
any style, can open the heaviest gates
without effort.
No welding required:
adjustable multi-position brackets.
“Plug ’n Play” connections
very simple and quick, with easy
identification of wires and terminals.
Easy Connection System:
ECSBus system for connection
of up to seven pairs of photocells
using only two wires.
Noiseless and reliable: body made
of painted die-cast aluminium;
mechanical parts made of metal.
Maximum safety ensured by the low
voltage connections and the automatic
obstacle detection feature.
Modular control card with (integrated)
built-in receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
-Adjustable partial opening to restrict
the passage to pedestrians and cycles
- Pause time adjustment
- Obstacle sensitivity adjustment.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
949x391x166
13.25
14
8032595792710
The content of the package may vary: consult the retailer.
Quick motor release
for manual gate operation.
Opening and closing mechanical
limit-switch.
No black-out: operation during
power failures guaranteed
by the PR1 buffer batteries (optional).
100
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
Packaging characteristics
85
729 mm
22 Mhouse
Mhouse 23
Each Kit WG20S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
2 WG10SK
Electromechanical
worm gear motor with
three Mhouse release
keys and adjustable
mounting brackets
included.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable flashing
light, with built-in aerial.
CL20S External
control unit for
control of WG10SK
electromechanical gear
motor with integrated
433.92 MHz variable
code receiver.
KS100 Two-position
(open/stop) key-operated
selector switch
with pair of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
EL1 12 V electric lock
interface.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
The most powerful, for swing gates
WG20S kit
DS1 13-key digital switch
with programmable code,
via radio.
Installation
Power supply (Vac)
Power (W)
Torque (Nm)
Speed (mm/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
Strength and elegance: WG20S, with its
die-cast aluminium casing that will match
any style, can open the heaviest gates
without effort.
Auto-programming: WG20 automatically
calculates the most suitable operating
parameters for each gate.
Autodiagnostic system identifies and
immediately signals any connection errors
or malfunctions.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
949x391x166
23.25
14
8032595792307
The content of the package may vary: consult the retailer.
Quick motor release
for manual gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
908 mm
100
No welding required:
adjustable multi-position brackets.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
Packaging characteristics
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
117
New Design for accessories.
(in perfect installation conditions, making the most
of the whole run and with a 90° opening).
230
150
1800
0.013 ÷ 0.024
540 (480)*
44
10
* Data with opening/closing limit switch between brackets
For updated and complete information, consult the product technical manual.
New:
No waiting in front of the gate:
only 20 seconds to open and close.
PT100 Two 945 mm high
posts including two pairs
of photocells.
Technical characteristics
Kit for the automation of a residential two-leaf gate,
each leaf measuring up to 4.5 m in width
or weighing up to 450 kg for leaf.
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
PR1 Buffer battery
for emergency power
supply.
24 Mhouse
Mhouse 25
Each Kit SL1S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
1 SL1SC Electromechanical gear motor
with integrated control unit and 433.92 MHz
variable code receiver. 3 Mhouse release
keys and mounting plate included.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable
flashing light,
with built-in aerial.
KS100 Two-position
(open/stop) key-operated
selector switch with pair
of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
PR1 24 V buffer battery
for emergency power
supply.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
Compact and elegant,
for sliding gates
DS1 13-key digital switch
with programmable code,
via radio.
PT100 Two 945 mm high
posts including two pairs
of photocells.
CR100 Nylon gear rack
with steel core, four
1-metre sections
CR25 one 1-metre
sections.
Technical characteristics
Installation
Power supply (Vac)
Power (W)
Thrust (N)
Speed (m/sec)
Protection class (IP)
Weight (kg)
Certification
SL1S kit
Kit for automation of a residential sliding gate
weighing up to 400 kg and 5 m max. long.
230
300
330
0.16 ÷ 0.25
44
9
For updated and complete information, consult the product technical manual.
Packaging characteristics
New:
Reliable and noiseless:
mechanical parts made of metal, die-cast
painted aluminium base, gear motor
mounted on bearings.
No waiting in front of the gate:
only 18 seconds to open and close
(in perfect installation conditions,
for a sliding gate 4 m long).
Auto-programming: automatically
calculates the most suitable operating
parameters for each gate.
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Quick motor release
for manual gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
560x210x360
11.30
21
8032595792291
The content of the package may vary: consult the retailer.
295 mm
New Design for accessories.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
163
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need for
connections to the electrical mains, even
in locations far away or difficult to access.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
300
26 Mhouse
Mhouse 27
Each Kit SL10S contains:
es
Fo
ccessori
ra
new
design
dy
Rea to
1 SL10SC Electromechanical gear motor
with integrated control unit and 433.92 MHz
variable code receiver. 3 Mhouse release
keys and mounting plate included.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
PH100 Pair of
wall-mounted
autosynchronized
photocells.
FL100 Adjustable
flashing light,
with built-in aerial.
KS100 Two-position
(open/stop) key-operated
selector switch with pair
of metal keys.
PT50 Two 485 mm high
posts including one pair of
photocells.
PR1 24 V buffer battery
for emergency power
supply.
Optional accessories
PF Solar power kit.
PBC Battery charger
power supply unit, for PF.
The strong solution,
for sliding gates
DS1 13-key digital switch
with programmable code,
via radio.
Installation
PT100 Two 945 mm high
posts including two pairs
of photocells.
CR100 Nylon gear rack
with steel core, four
1-metre sections
CR25 one 1-metre
sections.
Technical characteristics
Power supply (Vac)
Power (W)
Thrust (N)
Speed (m/sec)
Protection class (IP)
Weight (kg)
Certification
SL10S kit
Kit for automation of a residential sliding gate
weighing up to 550 kg and 7 m max. long.
230
420
475
0.12 ÷ 0.18
44
10
For updated and complete information, consult the product technical manual.
Packaging characteristics
New:
Reliable and noiseless:
mechanical parts made of metal, die-cast
painted aluminium base, gear motor
mounted on bearings.
No waiting in front of the gate:
only 23 seconds to open and close
(in perfect installation conditions,
for a sliding gate 4 m long).
28 Mhouse
Auto-programming: automatically
calculates the most suitable operating
parameters for each gate.
Autodiagnostic system identifies
and immediately signals any connection
errors or malfunctions.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
560x210x360
11.80
21
8032595792284
The content of the package may vary: consult the retailer
295 mm
New Design for accessories.
Extra safe thanks to the low-voltage
connections (24 V), the safety accessories
and the automatic obstacle detection
feature.
Quick motor release
for manual gate operation.
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
163
Compatibility with MhouseKit PF,
the kit for Solar power automations,
to automate gates without the need
for connections to the electrical mains,
even in locations far away
or difficult to access.
300
Mhouse 29
Each Kit GD0N contains:
es
Fo
ccessori
ra
new
design
Optional accessories
1 GD0N Electromechanical 24 V gear motor
with integrated control unit and 433.92 MHz
variable code receiver, belt drive on galvanized
steel guide, emergency release device.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
GA1 Oscillating arm
sliding on bearings.
Compulsory for
counterbalanced
up-and-over
doors.
GU1 Kit for external
release using steel cord.
Optional accessories
PH00 Pair of wall-mounted
autosynchronized
photocells.
User-friendly and quick
to install in any garage
KS100 Two-position
(open/stop) key-operated
selector switch with pair
of metal keys.
DS1 13-key digital switch
with programmable code,
via radio.
Installation
FL100 Adjustable flashing
light, with built-in aerial.
Technical characteristics
Power supply (Vac)
Power (W)
Thrust (N)
Speed (m/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
GD0N
Kit for automation of a sectional door up to 3.7 m in width
and up to 2.4 m high and up-and-over doors* up to 3.5 m in width
and up to 2.8 m high.
230
200
550
0.08 ÷ 0.14
2500
40
3
For updated and complete information, consult the product technical manual.
* with GA1 accessory
Packaging characteristics
New:
New Design for accessories.
For quick installation in any space,
with 180° adjustable head.
Reliable and noiseless: mechanical
parts made of metal, belt drive with sturdy
steel core, high-resistance galvanized
steel guide (three 1-meter pieces).
Powerful timed courtesy light: 21 W.
No waiting in front of the gate:
only 18 seconds to open and close
(in perfect installation conditions,
for a sectional door 2.5 m high).
Maximum safety ensured by the
low voltage connections (24 V), the safety
accessories and the magnetic encoder:
automatic obstacle detection feature,
with extra sensitive cut-in threshold
thanks to mapping of the force
along the entire travel.
EAN Code
8032595792253
The content of the package may vary: consult the retailer
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Manual release for manual door
operation in case of power failures.
1.033x245x188
14.50
15
212 mm
Auto-programming: GD0N automatically
calculates the most suitable operating
parameters for each door.
Autodiagnostic system: identifies
and immediately signals any connection
errors or malfunctions.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
3m
134
392
30 Mhouse
Mhouse 31
Each Kit GD1N contains:
es
Fo
ccessori
ra
new
design
Optional accessories
1 GD1N Pre-assembled electromechanical
24 V gear motor with integrated control unit
and 433.92 MHz variable code receiver,
belt drive on galvanized steel guide,
emergency release device.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
GA1 Oscillating arm
sliding on bearings.
Compulsory for
counterbalanced
up-and-over
doors.
GU1 Kit for external
release using steel cord.
FL100 Adjustable flashing
light, with built-in aerial.
PT50 Two 485 mm high
posts including one pair
of photocells.
Accessoires
Optional
accessories
en option
KS100 Two-position
(open/stop) key-operated
selector switch with pair
of metal keys.
Safety and comfort,
for garage doors
PH100 Pair of
wall-mounted
autosynchronized
photocells.
DS1 13-key digital switch
with programmable code,
via radio.
Installation
Technical characteristics
Power supply (Vac)
Power (W)
Thrust (N)
Speed (m/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
GD1N
Kit for automation of a residential sectional garage up to 4.4 m wide
and up to 2.4 m high and up-and-over doors* up to 4.2 m wide
and up to 2.8 m high.
230
250
600
0.10 ÷ 0.18
2500
40
4
For updated and complete information, consult the product technical manual.
* with GA1 accessory
Packaging characteristics
New:
New Design for accessories.
Pre-assembled for quick
installation in any space,
with 360° adjustable head.
Reliable and noiseless: mechanical
parts made of metal, belt drive with sturdy
steel core, high-resistance galvanized
steel guide (three 1-meter pieces).
Powerful timed courtesy light: 21 W.
No waiting in front of the gate:
only 15 seconds to open and close
(in perfect installation conditions,
for a sectional door 2.5 m high).
Maximum safety ensured by the
low voltage connections (24 V), the safety
accessories and the magnetic encoder:
automatic obstacle detection feature,
with extra sensitive cut-in threshold
thanks to mapping of the force
along the entire travel.
Auto-programming: GD1N automatically
calculates the most suitable operating
parameters for each door.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
1.050x215x250
14.90
15
EAN Code
8032595792277
The content of the package may vary: consult the retailer
Manual release for manual door
operation in case of power failures.
245 mm
Autodiagnostic system: identifies
and immediately signals any connection
errors or malfunctions.
4m
125
376
32 Mhouse
Mhouse 33
Each Kit GD10N contains:
es
Fo
ccessori
ra
new
design
Optional accessories
1 GD10N Pre-assembled electromechanical
24 V gear motor with integrated control unit
and 433.92 MHz variable code receiver,
belt drive on galvanized steel guide,
emergency release device.
2 GTX4 433.92 MHz,
4 button variable code
transmitters. Practical
wall rest included
in the package.
GA1 Oscillating arm
sliding on bearings.
Compulsory for
counterbalanced
up-and-over
doors.
GU1 Kit for external
release using steel cord.
FL100 Adjustable flashing
light, with built-in aerial.
PT50 Two 485 mm high
posts including one pair of
photocells.
PR1 24 V buffer battery
for emergency power
supply.
Optional accessories
KS100 Two-position
(open/stop) key-operated
selector switch with pair
of metal keys.
The maximum power,
for garage doors
PH100 Pair of
wall-mounted
autosynchronized
photocells.
DS1 13-key digital switch
with programmable code,
via radio.
Technical characteristics
Installation
Power supply (Vac)
Power (W)
Thrust (N)
Speed (m/sec)
Travel (mm)
Protection class (IP)
Weight (kg)
Certification
GD10N
Kit for automation of a residential sectional garage up to 5.2 m wide
and up to 3.4 m high and up-and-over doors* up to 5 m wide and up to 3.5 m high.
* with GA1 accessory.
230
370
1000
0.10 ÷ 0.15
3500
40
5
For updated and complete information, consult the product technical manual.
Packaging characteristics
New:
New Design for accessories.
Pre-assembled for quick
installation in any space,
with 360° adjustable head.
Reliable and noiseless: mechanical
parts made of metal, belt drive
with sturdy steel core, high-resistance
galvanized steel guide
(four 1-meter pieces).
Powerful timed courtesy light: 21 W.
No waiting in front of the gate:
only 23 seconds to open and close
(in perfect installation conditions, for a sectional door 3.5 m high).
Maximum safety ensured by the
low voltage connections (24 V), the safety
accessories and the magnetic encoder:
automatic obstacle detection feature,
with extra sensitive cut-in threshold
thanks to mapping of the force
along the entire travel.
Auto-programming: GD10N automatically
calculates the most suitable operating
parameters for each door.
EAN Code
8032595792260
The content of the package may vary: consult the retailer
Manual release for manual door
operation in case of power failures.
4m
125
No black-out: the buffer batteries
guarantee up to ten opening and closing
manoeuvres even in the event of power
outages (accessory).
1.050x215x250
15.90
15
245 mm
Autodiagnostic system: identifies
and immediately signals any connection
errors or malfunctions.
Modular control card
with integrated receiver
- 2 speeds
- Timed and adjustable automatic
closing function
- Programming of new transmitters
(up to 150)
- Adjustable partial opening function
- Pause time adjustment
- Obstacle sensitivity adjustment
- Automatic recognition of NC-NO 8.2 KOhm safety devices, if installed.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
376
34 Mhouse
Mhouse 35
Each Kit RM contains:
Ø61,5
M5
60 mm
17
Ø48
Ø36
1 RM 45 mm diameter 230 Vac tubular gear motor
with mechanical limit-switch, equipped with
hardware pack.
RM15, 15 Nm torque
RM30, 30 Nm torque
RM45, 45 Nm torque.
1 535.10010 Plate
support with 2 M5
threaded holes
585.10200
Key for limit switch
adjustment
1 515.06000
Octagonal 60 wheel +
crown
78 mm
70 mm
Optional accessories
RT3N Awnings and rolling
shutters radiocontrol Kit:
- 1 RC1 control unit
- 3 button STX1 transmitter with wall bracket.
RM15 - RM30 - RM45
RM15
15
507 mm
31,5
1,5
45
8
Ø48
17,5
Ø5
3,5
Power supply (Vac)
Power (W)
Lifted weight* (kg)
Torque (Nm)
Speed (Rpm)
No. of turns before stop
Cable length (m)
Certification
17
Ø30
Ø45
Kit for rolling shutter or awning automation,
featuring 45 mm diameter tubular motors.
Rolling shutters: measure the area of the shutter, height by width = m2
9
RM45
RM30
Ø Tube
17,5
Number of arms
1.5
2
2.5
3
4
5
78
4
RM30
RM30
RM45
2
RM15
4
RM30
170
28
15
17
RM30
230
250
56
30
17
30
2.5
RM45
248
90
45
12
* Value calculated with roller diameter of 60 mm.
For updated and complete information, consult the product technical manual.
Packaging characteristics
Ø3
,5
12
17
70
2
RM15
16
RM45
Ø
31,5
1,5
Awnings: once the diameter of the tube has been established,
intersect the projection value with the number of awning arms
Arm projection (m)
10
RM30
507 mm
3,5
Radio controlled with the kit RT3N,
composed of a control unit with
RC1 receiver and a 3 button STX1
transmitter (optional): easy to install
and ready to use.
5.6
RM30
RM30
8
Ø5
Ø48
Convenience: powerful, noiseless
and reliable motor mounted on bearings.
Easy installation
- avec les adaptateurs de type octogonal
- with the special octagonal adapter
and support provided
- simple and precise adjustment
of limit positions on opening and closing
thanks to mechanical limit switch
- pre-connected 3-metre motor cable;
immediate connection to activation
buttons.
5
RM30
RM15
45
With 6015mm adapter
2.8
RM15
RM15
Ø30
Ø45
Max m2
Wood
Aluminium/PVC
Reduced dimensions: only 507 mm
in total length ideal for the narrowest
of shutters and awnings and in the most
confined of roller enclosures.
515.17000 Notch Ø 70
wheel + crown.
Technical characteristics
Ø3
,5
Ø
12
Comfort and safety,
for all shutters and sun awnings
515.17800
Round Ø 80 Notch 78
wheel + crown.
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
RM15
550x100x100
2.6
150
RM30
550x100x100
2.8
150
RM45
550x100x100
2.8
150
8032595791119 8032595791126 8032595790419
The content of the package may vary: consult the retailer.
RM30
RM45
RM45
RM45
-
-
-
For updated and complete information, consult the product technical manual.
36 Mhouse
Mhouse 37
Each Kit RMEN contains:
es
Fo
ccessori
ra
new
design
Ø61,5
M5
60 mm
17
Ø48
Ø36
1 RMEN Tubular gear motor Ø 45 m, 230 Vac
with built-in control unit, receiver,
electronic limit-switches and hardware pack
RME15N,15 Nm torque
RME30N, 30 Nm torque
RME45N, 45 Nm torque.
1 STX1 3 buttons variable
code transmitters.
Practical wall rest
included in the package.
1 535.10010
Sheet steel support
with two M5 threaded
holes.
1 515.06000
Octagonal 60
wheel + ring.
Optional accessories
15
507 mm
31,5
1,5
Comfort: powerful, noiseless and reliable.
Easy installation thanks to the special
octagonal adapter and support provided.
38 Mhouse
5.6
RME30
RME30
9
RME45
RME30
Built-in control unit and receivers:
easy remote programming and exclusive
functions.
Safe transmissions: receiver
at 433,92 MHz with self-learning mode,
Rolling Code with over 4.5 million
billion combinations.
Easy and comfortable (STX1) radio
controlled limit switch adjustment,
without having to open the shutters box.
Possibility of programming a stop
at an intermediate position.
3,5
Maximum functionality: STX1 transmitter
included (already memorised) possibility
of controlling multiple motors with optional
STX4 transmitter.
Easy remote entry of transmitters
with no need for connection to the motor.
Encoder technology: millimetric precision
and maintenance of set values over time;
stress on the shutter always optimal and
constant.
Ø Tube
17,5
Number of arms
45
17
3,5
1.5
2
2.5
3
4
5
78
4
RME30
RME30
RME45
2
RME15
Power supply (Vac)
Power (W)
Lifted weight* (kg)
Torque (Nm)
Speed (Rpm)
No. of turns before stop
Cable length (m)
Certification
27,6
RM30
230
250
56
30
170
28
15
17
RM45
248
90
45
12
< 150
2.5
* Value calculated with roller diameter of 60 mm.
Packaging characteristics
45
70
2
RME15
16
RME45
Ø3
,5
12
31,5
Awnings: once the diameter of the tube has been established,
intersect the projection value with the number of awning arms
Arm projection (m)
10
RME30
507 mm
1,5
Visual signals simplify programming
phases.
Bracket kit and square
pivot 10 mm threaded
holes.
Ø
5
RME30
RME15
Ø30
Ø45
2.8
RME15
RME15
8
Ø5
Ø48
Exclusive and functional design:
even more compact motor head.
Reduced dimensions: only 507 mm
in total length ideal for the narrowest
of shutters and awnings and in the most
confined of roller enclosures.
Max m2
Wood
Aluminium/PVC
8
Ø48
New:
With 6015
mm adapter
17,5
Ø5
Rolling shutters: measure the area of the shutter, height by width = m2
Safe: shutter stop with shutdown
of movement in event of obstacles
and repetition of manoeuvre in the
presence of ice or bolts engaged.
525.10012/M6AX
max 30 Nm
RM15
17
Kit for rolling shutter or awning automation, including a 45 mm
diameter tubular motors. Built-in control unit and receiver,
electronic limit switch and encoder movement control.
New Design for accessories.
515.17000
Cap Ø 70
wheel + ring.
M6
Technical characteristics
Ø30
Ø45
RME15N - RME30N - RME45N
515.17800
Round Ø 80 - Cap 78
wheel + ring.
Ø3
,5
Ø
12
Advanced performance,
for rolling shutters and sun awnings
DS1 13-key digital switch
with programmable code,
via radio.
mm
48
3
55
STX1, STX2, STX4
1, 2, 4 channels
for the control of single
automations or groups.
62
30
78 mm
70 mm
4
4
RME30
Package dimensions (mm
Package weight (kg)
Palletization (pz)
EAN Code
RM15
550x100x100
2.6
150
RM30
550x100x100
2.8
150
RM45
550x100x100
2.8
150
8032595791133 8032595791140 8032595790570
The content of the package may vary: consult the retailer.
RME30
RME45
RME45
RME45
-
-
-
For updated and complete information, consult the product technical manual.
Perfect closure of housing with encoder
and automatic adjustment of canvas
tension to avoid unsightly tension failure and
guarantee constantly perfect movements.
Mhouse 39
Fo
es
ccessor
i
ra
new
design
Awnings and rolling shutters
radiocontrol kit
Lighting, irrigation and burglar systems
controlled by a single remote control
RT3N
Kit consisting of one control unit with RC1 receiver
and a 3-button STX1 transmitter to radio control
any rolling shutter, awning or rolling garage door.
RC2
The STX1 transmitter, produced for the
control of rolling shutters and awnings,
has three buttons, up, stop and down,
and thanks to the 18 billion billion
variable code combinations,
guarantees absolute security.
To control at a distance lighting, irrigation, burglar and alarm
systems using the same STX4 transmitter used
for the gate and garage door automation.
Built-in 433.92 MHz radio receiver:
with over 18 billion billion combinations
and the possibility of memorising
up to 30 transmitters.
RC1 control unit is suitable for all RM
and RS series tubular motors or any
motor up to 500 W.
User-friendly installation and ready
for use immediately.
Compact size: only 98x26x20 mm.
Internal terminal board for connection.
Protection class: IP55.
Automatic switch off: possibility
of programming 2 indipendent timers
from a minimum of 0.5” to a maximum
of approximately 9 hours.
Complete with wall bracket.
User-friendly installation
and ready for use immediately.
Possibility of remote control
Power supply (Vac)
Power (W)
Dimensions (mm)
Weight (gr)
STX1 technical characteristics
40 Mhouse
Maximum control versatility
with 2 transmitter memorisation modes
Modo I: ON - OFF with separate buttons
Modo II: ON - OFF - Man present - Timer.
RC2 technical characteristics
all Mhouse transmitters range
230
500
98x26x20
45
See page 43
Compact size: only 98x26x20 mm.
Protection class: IP55
Built-in 433.92 MHz radio receiver
possibility of memorising up to 30 transmitters.
RC1 technical characteristics
The control unit is suitable to supply
loads with 230 Vac mains supply and
an output of 500 W.
Power supply (Vac)
Power (W)
Manoeuvre duration (sec)
Programmable functions (Mode 1)
Programmable functions (Mode 2)
Dimensions (mm)
Weight (gr)
230
500
Timer 1 Timer 2 from 0.5” to 540’
On-Off
On - Off - Man Present - Timer 1 - Timer 2
98x26x20
45
Mhouse 41
new
design
new
design
Transmitter
Transmitter
GTX4
STX1
Miniaturized transmitter for gates and garage doors, 433.92 MHz
rolling code system with self-learning function.
Code
Description
GTX4
4 keys for control automation systems or automation groups.
Total security ensured by the variable
code with 18 billion billion combinations!
Unclonable: the code varies with each
transmission according to an algorithm
that masks the code and does not show
any relation with the following ones,
which can only be recognized
by the Mhouse receiver: the same
technology used in antitheft systems.
Transmitter for awnings and rolling shutters
433.92 MHz rolling code system with self-learning function.
Code
Description
STX1
3 keys for control automation systems or automation groups.
Open - Stop - Close.
Convenience: 4 keys for control
of as many devices, transmission
confirmation led, key ring eyelet.
Very autonomous and lightweight
with the two 3 V lithium batteries.
Frequency (MHz)
Coding
Range (m)
Power supply
Buttons
Dimensions (mm)
Weight (gr)
42 Mhouse
Total security ensured by the variable
code with 18 billion billion combinations!
All under control: management of up
to 5 Open-Stop- Close automation systems
or automation groups.
Technical data
433,92
Digital 64 bits (18 billion billion)
50-100
6 V +20% -40% with CR2016 type lithium batteries
4
72x31x11h
18
Convenience: transmission confirmation
led, key ring eyelet. Very autonomous
and lightweight with the two 3 V lithium
batteries.
Unclonable: the code varies with each
transmission according to an algorithm that
masks the code and does not show any
relation with the following ones, which can
only be recognized by the Mhouse receiver:
the same technology used in antitheft
systems.
Practical wall rest included in the
package.
Technical data
The STX1 transmitter with its three up,
stop and down keys, has been specifically
produced for the control of rolling shutters
and awnings.
Frequency (MHz)
Coding
Range (m)
Power supply
Buttons
Dimensions (mm)
Weight (gr)
433,92
Digital 64 bits (18 billion billion)
50-100
6 V +20% -40% with CR2016 type lithium batteries
3
72x31x11h
18
Practical wall rest included
in the package.
Mhouse 43
Receiver
Digital switch
Pre-wired receiver: 2 variable code
outputs with 433.92 MHz transmission
frequency and self-learning function.
Digital switch with programmable code,
via radio.
DS1
R2
Easy installation: the colour-coded
terminals enable quick, error-proof
connections.
This universal receiver can also be used
with pre-existing automations.
Two outputs for control of as many
devices, which can be freely linked
to any key on the transmitter.
Convenience: programming key
for transmitter memorization.
Remote code memorization using
an authorized transmitter.
A LED confirms that the transmitter
is operational.
Radio digital switch with programmable
code 13-key radio digital switch:
wireless easy installation. Compatible with
the Mhouse receivers with rolling code
technology. It generates 18 billion billion
combinations, with self-learning functions.
Complete: 3 transmission channels
to control as many automations.
Light-up-when-necessary button.
Safe: 9.999.999.999 possible combinations
by choosing a number from 0 up to 10
figures.
Technical specifications
Frequency (MHz)
Radio coding
Range (m)
Power supply
Battery life (estimated)
No. of figure combination
Protection rating (IP)
Dimensions (mm)
Weight (g)
Technical characteristics
Frequency (MHz)
Memory (no. of transmitters)
Power supply (Vac-Vdc)
Outputs
Dimensions (mm)
Weight (gr)
433.92
256
12-24
2
86x57x22h
55
Cheap: extra low consumption,
transmission is activated when any
key is pressed and it switches itself
off automatically.
433.92 ± 100KH
rolling code 64bit
100; 35 if inside buildings
6 Vdc with 2 CR2430 type lithium batteries
2 years with 10 transmissions per day
from 0 to 10
44
65x95x33
260
new
design
new
design
Key switch
Photocells
Two-position key-operated
selector switch.
Pair of wall-mounted
autosynchronized photocells.
KS100
Easy installation: the colour-coded
terminals enable quick, error-proof
connections.
Clever: very easy code-changing.
The same system used for mobile phone
with PUK code in case you forget the one
you programmed.
PH100 - PH00
Convenience: LED helps locate
the selector switch even in total darkness.
Equipped with two metal keys.
Possibility of commanding two different
functions associated with the turning
direction of the key.
Security: electronics protected
by a second plastic enclosure to prevent
damage during installation.
Sturdiness:
extra thick polycarbonate body.
Protection class: IP55.
PH100, easy installation with
the Mhouse ECSBus system: only two
wires are required for connection of the main
system components, and there is no need to
follow any particular order!
Wasting time connecting to the photocell
terminals is no longer necessary, simply
connect the two wires at any point
within the system.
Convenient jumpers for selectionof the
required function.
Up to 7 pairs of photocells can be installed
without worrying about their proximity.
PH00, pair of synchronised traditional
photocells (without ECSBus System).
Only for GD0N.
Common features
Maximum security: electronics
protected by a second plastic enclosure
to prevent damage during installation.
The antidazzle circuit protects you from
blinding glares generated by the sun
or other powerful light sources.
Convenience: very simple alignment thanks
to the LED signal with proportional flashing.
Sturdiness: extra thick polycarbonate body.
Technical characteristics
PH100 power supply
PH00 power supply
Protection class (IP)
44 Mhouse
Provided directly by the ECSBus system
Standard 12-24 Vac/Vdc
55
Mhouse 45
Posts
Interface
High posts, with a pre-assembled
photocell on each, adjustable height.
12 V electric lock interface.
PT50 - PT100
EL1
PT50 pair of 485 mm high posts,
with a pre-assembled photocell on each,
adjustable height.
PT100 pair of 945 mm high posts,
with two pre-assembled photocells
on each, adjustable height.
Easy installation with the Mhouse
ECSBus system: only two wires are
required for connection of the main
system components.
The colour-coded terminals,
enable quick, error-proof connections.
Wasting time connecting to the photocell
terminals is no longer necessary, simply
connect the two wires at any point
within the system.
Technical characteristics
Power supply
Protection class (IP)
Provided directly by the ECSBus system
55
Sturdy and elegant: made of profiled
aluminium with polycarbonate front
and shock-resistant base.
Practical: Electronic locks fitted on swing
gate automatisms can be activated by
means of the EL1 device.
Convenience: very simple alignment
thanks to the LED signal with proportional
flashing. Convenient jumpers for selection
of the required function.
Maximum security: electronics protected
by a second plastic enclosure to prevent
damage during installation.
The antidazzle circuit protects you from
blinding glares generated by the sun
or other powerful light sources.
Suitable for Mhouse systems of any size,
since up to 7 pairs of photocells
can be installed without worrying
about their proximity.
Only compatible with:
1. Initial release type electronic locks
(single command impulse at the beginning
of the opening manoeuvre), with a
maximum power supply of 12 Vac 15 VA
2. Mhouse control units having the “EL1”
indication on the FLASH output.
Technical characteristics
Flashing light output
For indicator lights with 12V, max. 21W bulb.
Electronic lock output:
Electronic lock activation time:
Protection class (IP)
Dimensions (mm)
Weight (gr)
12 Vac - max. 15 VA
approx. 2 s.
30
60x59x422 with flaps, 60x38x422 without flaps
50
new
design
Flashing light
Buffer battery
Adjustable flashing light with integrated aerial
for 433.92 MHz frequency.
24 V buffer battery for
emergency power supply.
FL100
Easy installation: can be mounted
in any position using the base designed
for wall or horizontal installation.
Maximum security: with diffuser
that rotates 360° to aim the signal
in the most suitable direction.
High efficiency lenses optimise visibility.
PR1 - PR2
Integrated aerial, invisibile from the
outside for protection against vandalism.
Convenience: easy availability
and replacement of the powerful lamp
used in the automotive industry.
Durability: shock-resistant
polycarbonate structure.
Technical characteristics
Power supply
Power (W)
Protection class (IP)
46 Mhouse
Provided directly by the Mhouse system
21
55
Convenience: operation during power
failures guaranteed by the PR1 or PR2
buffer batteries housed inside the control
unit, which can be connected using
a convenient plug-in connector.
Mhouse won’t let you down even
during black-outs: at least ten opening
and closing manoeuvres guaranteed.
Incorporated control unit: it controls
batteries recharging, extending their life
and always providing for the maximum
charge when a black out happens.
Mhouse 47
Mhouse Headquarters
Oderzo TV Italy
Ph. +39 0422 85 38 38
Fax +39 0422 85 35 85
[email protected]
Product Design Roberto Gherlenda Photo Studio Gabriotti, wurbs
Mhouse is a trademark
of Nice SpA - Oderzo TV - Italia
The information shown in this publication is purely indicative.
Nice reserves the right to make any modifications to the products as it sees fit.
MHCATB-GB/00/09-11
www.mhouse.com
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement