soldering station
CD
SOLDERING
STATION
Reference Guide
www.jbctools.com
CD / SOLDERING STATION
CONTENTS
CONTROL UNIT
SUPPLIED WITH
CD-2SA
SUPPLIED WITH
CD-2BA
SOLDERING IRON
T210-A
SOLDERING IRON
T245-A
CABLE COLLECTOR
CC8193
CARTRIDGES
C210001
C210008
POWER CORD
MANUAL
CD
SOLDERING
STATION
Reference Guide
2
CARTRIDGES
C245003
C245007
MANUAL
COMPLETE STATION
2
1
3
3
CABLE COLLECTOR ASSEMBLY
1
CABLE ASSEMBLY
2
4
CABLE POSITION
DOME RELEASE
3
CLEANING WOOL
CL6205
CABLE COLLECTOR
Use the cable collector for
keeping workplace clear of
cable
METAL BRUSH
Use brush to clean tips and to
eliminate oxidation for easy
retinning
STAND
CARTRIDGE
EXTRACTOR
RUBBER BANDS
Tap cartridge smoothly against
bands to remove excess solder
from tip
5
INSTALLATION
CONTROL UNIT
SOLDERING IRON
T210-A or T245-A
Main switch
Power Cord
Socket
Equipotential
connector
HEAT MANAGEMENT
JBC stations intelligently manage the tool temperature:
Work mode: When the tool is used, pre-set work temperature is 350º C.
Sleep mode: When the tool is in the stand, the temperature goes down to 220º C.
Hibernation mode: After longer periods of inactivity (pre-set i.e 30 minutes), the power is cut off and
the tool cools down to room temperature.
WORK
HIBERNATION
220
220
SLEEP
room
temperature
time
The advantage of this heat management is lifespan increase which ensure low cost of ownership.
6
time
WORKING
Working tool model
Tip temperature
Tool T 2 4 5
350 c
0
220 oC
Sleep
Selected temperature
Status
Power 10%
% Instant power supplied to the tool
Decrease & move down
Selection
Increase & move up
SELECT key 2 seconds
to enter Menu
SETTINGS
Main menu
Station settings
1 Temp unit
Celsius
2 Maximum temp 4000C
3 Minimum temp
2000C
4 Help text
OFF
1
2
3
4
Reset settings
Station settings
Tool settings
Counters
5
Program version
Exit
Counters
Tool settings
1 Fix one temp
----2 Temp levels set
OFF
3 Sleep delay
0 min
1
2
3
Plugged hours
Working hours
Sleep hours
0
0
0
Tool T245
5
6
7
8
Beep
Power limit
Popup
Change PIN
Back
ON
130W
ON
ON
4 Sleep temp
5 Hibernation delay
6 Temp adjust
Back
2200C
0 min
O OC
Tool T245
4 Hibernation hours
5 No tool hours
6 Sleep cycles
0
0
0
Back
ORIGINAL PIN: 0105
7
TECHNICAL SPECIFICATIONS
-
-
-
-
-
-
-
Temperature selection from 90 to 450°C (±5%).
Power: 75W.
Safety transformer, mains separator and double isolation, with temperature protection fuse.
CD-2A 230V control unit. Input: 230V 50Hz. Output: 24V.
CD-1A 120V control unit. Input: 120V 60Hz. Output: 24V.
Total weight of unit: 2,6 Kg.
Complies with CE standards on electrical safety, electromagnetic compatibility and ESD protected housing
“skin effect”.
- RoHS compliant.
- Equipotential connector and the tool tip are connected to station mains ground supply for ESD protection.
This product should not be
thrown in the garbage.
ENGLISH / WARRANTY
JBC’s 2 years warranty guarantees this equipment against all manufacturing defects, covering the replacement of defective parts
and all necessary labour.
Warranty does not cover product wear due to use or mis-use.
In order for the warranty to be valid, equipment must be returned,
postage paid, to the dealer where it was purchased enclosing this
fully completed form.
SERIAL N`
STAMP OF DEALER
MORE INFORMATION
www.jbctools.com
0009517-0110
DATE OF PURCHASE
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement