Table of Contents - Broadcasters General Store

Table of Contents - Broadcasters General Store
Manufacturer’s
Suggested Retail Pricing
#43
Effective 1 September 2013 – 1 April 2014
[email protected]
www.AxiaAudio.com
Table of Contents
Section 1: Radius, DESQ & RAQ Console Systems ..................................... 2
Radius, DESQ and RAQ IP consoles, QOR.16 integrated console engine
Section 2: iQ Console System ..................................................................... 4
iQ Main Frame, expansion frames, QOR.32 integrated console engine,
backup power supply, iQ6 phone system
Section 3: Element Modular Control Surfaces ........................................... 6
Element frames, StudioEngine, Powerstation integrated console engine, power supplies,
modules and accessories
Section 4: Pathfinder Router Automation Systems ....................................15
Router control tools
Section 5: Routing Control Panels ...............................................................16
OLED, FilmCap & SmartSwitch button panels, XY router panels
Section 6: Axia IP-Intercom System ...........................................................18
Rackmount, desktop and modular console drop-in Intercom equipment
Section 7: xSwitch, xNodes and Special Purpose Audio Nodes ..............21
xSwitch zero-configuration Livewire® network switch; xNode standalone mic, analog and
AES I/O, GPIO, Zephyr iPort MPEG Gateway, Omnia.8X eight-channel audio processor
Section 8: Axia Software Applications .......................................................26
IP-Audio Driver, iProFiler networked audio logger, network management tools
Section 9: Axia Factory Services ................................................................28
Configuration, Training & Network Design
Section 10: Console Service Kits .................................................................29
Maintenance parts for consoles and power supplies
Section 11: Partner Products .......................................................................32
Xi Audio RJ-45 audio patch cables, StudioHub accessory panels
Radio Never Sleeps. Neither do we. We're here for you,
anytime, with free round-the-clock, 24/7 technical
support. Call +1-216-622-0247.
1
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Section 1: Radius, DESQ & RAQ Console Systems
Radius Console Components – www.AxiaAudio.com/radius/
Radius 8-Fader Console System
P/N 2001-00273: 8-Fader control surface
$2,995.00
Radius is an all-in-one console system designed for small standalone or
networked studios, where no more than eight faders are needed. A Radius 8Fader control surface and a QOR.16 integrated console engine (P/N 200100274, order separately below) constitute a complete Radius system.
Radius 8-Fader console
The Radius surface connects to the QOR.16 engine with a single CANBus cable.
Radius includes 4 stereo Program buses — 3 dedicated Program, Audition and
Utility mixing outputs; the fourth a stereo Utility bus for recording phone callers
or other off-air bits. The fourth bus may also be used as an additional Program
bus. Automatic mix-minus is provided on each fader, plus talkback functions,
one-button off-air Record Mode, Show Profile instant recall of up to 4 pre-defined
console “snapshots”, LED bar-graph program meters switchable between VU and
PPM meter styles, high-resolution OLED option displays on each fader, and
Studio and Control Room monitor controls. Radius can be placed on top of desk
surface, mounted drop-in style, or rack-mounted using included hardware. Unit
weight: 12 lbs / 5.5 kg. Shipping weight 25 lbs / 11.4 kg.
P/N 2001-00274: QOR.16 Integrated Console Engine
QOR.16 integrated console engine
QOR.16 integrated console engine includes DSP-based mixing engine, audio I/O,
machine-control logic, Ethernet switch. 2 mic inputs, 8 Analog inputs, 4 Analog
outputs, 1AES/EBU input and 1 AES/EBU output, 4 GPIO, Ethernet switch with 6
Livewire 100Base-T ports (4 with PoE), 2 Gigabit ports (RJ-45 & SFP) for
connection to Livewire networks. I/O can be easily expanded using Axia Audio
Nodes (see Section 6). Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60
Hz. 100 Watts. Rackmount, 2RU.
2
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,995.00
DESQ Console Components – www.AxiaAudio.com/desq/
Axia DESQ IP Console
P/N 2001-00313
Axia DESQ IP Console
P/N 2001-00274: QOR.16 Integrated Console Engine
QOR.16 integrated console engine
$1,995.00
Six-fader, two-bus Axia DESQ console is a cost-effective, small-footprint console
option perfect for small production studios, remote vehicles, content ingest
stations, etc. DESQ has two stereo mixing buses and a Preview (cue) bus, six sideloading, 100mm. conductive-plastic faders for silky-smooth operation and long
life, razor-sharp OLED channel options displays, OLED meter display with
switchable VU / PPM ballistics, and monitor / headphone controls for auditioning
of Program buses or two assignable External monitor source selections. OLED
time-of-day clock + timer display with auto / manual reset option. Aircraft-quality
switches feature all-LED lighting. Anodized work surface with rub-proof etched
markings. Automatic mix-minus for phone callers and codec sources; Show
Profile instant recall of up to 4 pre-defined console “snapshots”. Desktop
mounting; no countertop cutout required; connects to QOR.16 console engine
with a single power/control cable. Perfect for standalone installation in voiceover
or “home” studios, networks with larger Axia networks too. A DESQ control
surface (P/N 2001-00313) and a QOR.16 integrated console engine (P/N 200100274, order separately) constitute a complete RAQ system. Two DESQ consoles,
or one DESQ and one RAQ console may be paired with a single QOR.16 for
cost-effective multi-console deployment. Desktop mount, measures 15.3” x
15.3” (38.9 cm.) square, 2.8” (7.1 cm.) deep.
$2,995.00
QOR.16 integrated console engine includes DSP-based mixing engine, audio I/O,
machine-control logic, Ethernet switch. 2 mic inputs, 8 Analog inputs, 4 Analog
outputs, 1AES/EBU input and 1 AES/EBU output, 4 GPIO, Ethernet switch with 6
Livewire 100Base-T ports (4 with PoE), 2 Gigabit ports (RJ-45 & SFP) for
connection to Livewire networks. I/O can be easily expanded using Axia Audio
Nodes (see Section 6). Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60
Hz. 100 Watts. Rackmount, 2RU.
RAQ Console Components – www.AxiaAudio.com/raq/
Axia RAQ IP Console
P/N 2001-00290
Axia RAQ IP Console
P/N 2001-00274: QOR.16 Integrated Console Engine
QOR.16 integrated console engine
$1,695.00
Six-fader Axia RAQ console provides a convenient way to add a physical mixing
surface nearly anywhere, no matter how space-limited. RAQ has six rotary faders
with OLED channel options displays, two stereo mixing buses and Preview (cue)
bus, a high-resolution OLED meter display with switchable VU / PPM ballistics,
and monitor / headphone controls for auditioning of Program buses or two
assignable External monitor source selections. Aircraft-quality switches feature
all-LED lighting. Anodized work surface with rub-proof etched markings. Smooth,
accurate rotary faders with push-on/push-off channel switches. Automatic mixminus for phone callers and codec sources; Show Profile instant recall of up to 4
pre-defined console “snapshots”. Ideal for standalone installation, but networks
with larger Axia networks too.A RAQ control surface (P/N 2001-00290) and a
QOR.16 integrated console engine (P/N 2001-00274, order separately) constitute
a complete RAQ system. Two RAQ consoles, or one RAQ and one DESQ
console, may be paired with a single QOR.16 for cost-effective multi-console
deployment. Rackmount, 4RU, 2.6” (6.45 cm.) deep.
QOR.16 integrated console engine includes DSP-based mixing engine, audio I/O,
machine-control logic, Ethernet switch. 2 mic inputs, 8 Analog inputs, 4 Analog
outputs, 1AES/EBU input and 1 AES/EBU output, 4 GPIO, Ethernet switch with 6
Livewire 100Base-T ports (4 with PoE), 2 Gigabit ports (RJ-45 & SFP) for
connection to Livewire networks. I/O can be easily expanded using Axia Audio
Nodes (see Section 6). Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60
Hz. 100 Watts. Rackmount, 2RU.
3
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,995.00
Section 2: iQ Console System
iQ Console Components – www.AxiaAudio.com/iq/
iQ Console System
P/N 2001-00275: iQ 8-Fader Main Frame
$2,995.00
The iQ system can be used to build custom consoles of sizes from 8 to 24 faders.
A basic system consists of one iQ 8-Fader Main Frame and one QOR.32
integrated console engine (P/N 2001-00276, order separately below).
iQ Main Frame 8-Fader console
The iQ mixing surface plugs into the QOR.32 engine using a single CANBus cable.
iQ operates as a standalone console, but can also connect to Axia networks.
Faders and control capabilities can be expanded by adding one or more of the iQ
Expansion Frames described below. Features include 3 dedicated stereo
Program buses, plus a stereo Utility bus that can be used for phone calls, off-air
recording, or as a fourth Program bus. Automatic mix-minus is provided on each
fader, plus talkback functions, one-button off-air Record Mode, Show Profile
functions for instant recall of up to 4 pre-defined console “snapshots”, highresolution OLED program meters switchable between VU and PPM metering
styles, sharp OLED option displays on each fader strip, Studio and Control Room
monitor controls. Auto-switching iQ Backup Power Supply (P/N 2001-00277, see
below) can be added for redundant power backup. iQ console frames may be
placed on top of desk surface or mounted drop-in style, iQ Main may be rackmounted using included hardware. Multiple frames may be physically joined.
Unit weight: 12 lbs / 5.5 kg. Shipping weight 25 lbs / 11.4 kg.
P/N 2001-00276: QOR.32 Integrated Console Engine
QOR.32 integrated console engine
$4,995.00
QOR.32 integrated console engine includes DSP-based mixing engine, audio I/O,
machine-control logic, Ethernet switch. 4 mic inputs, 16 Analog inputs, 8 Analog
outputs, 2 AES/EBU ins/outs, 8 GPIO, Ethernet switch with 6 Livewire 100Base-T
ports (4 with PoE), 2 Gigabit ports (RJ-45 & SFP). I/O can be easily expanded using
Axia Audio Nodes (see Section 6). QOR.32 supports consoles of up to 24 faders or
three console frames. Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60
Hz. 100 Watts. Rackmount, 3RU.
iQ Backup Power Supply
P/N 2001-00277
Add redundant power to your iQ system! Single-cable connection to QOR.32
console engine provides backup power with automatic switching. Auto-sensing
power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 100 Watts. Rackmount, 2RU.
iQ Backup Power Supply
4
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$1,095.00
iQ Console Components, Continued
iQ 8-Fader Expansion Frame
P/N 2001-00283
$1,995.00
The iQ 8-Fader Expansion Frame plugs in to the iQ Core using an available
CANBus connector; adds eight faders to your iQ Main Frame. Utilizes 100mm
conductive-plastic faders, aircraft-quality switches and LED key back-lighting.
May be placed on top of desk surface or mounted drop-in style. iQ frames can be
physically joined using included hardware. Unit weight: 9 lbs / 4 kg. Shipping
weight: 20 lbs / 9 kg.
iQ 8-Fader Expansion Frame
iQ 6-Fader Expansion Frame + User Buttons
P/N 2001-00285
$1,995.00
The iQ 6-Fader Expansion Frame plugs in to the iQ Core using an available
CANBus connector; adds six faders to your iQ Main Frame, plus 10 buttons for
control of GPIO closures to peripheral audio devices. Utilizes 100mm conductiveplastic faders, aircraft-quality switches and LED key back-lighting. May be placed
on top of desk surface or mounted drop-in style. iQ frames can be physically
joined using included hardware. Unit weight: 9 lbs / 4 kg. Shipping weight:
20 lbs / 9 kg.
iQ 6-Fader Expansion Frame
with assignable user buttons
iQ 6-Fader Telco Expansion Frame
P/N 2001-00284
iQ 6-Fader Telco Expansion Frame
$1,995.00
The iQ 6-Fader Telco Expansion Frame plugs in to the iQ Core using an available
CANBus connector; adds six faders to your iQ Main Frame. Built-in Telco section
provides easy to use, on-the-board control of Telos iQ6 telephone hybrid (see
below). Includes OLED Status Symbols™ visual call management display, direct
control of six phone lines and two hybrids, DTMF dial pad. Utilizes 100mm
conductive-plastic faders, aircraft-quality switches and LED key back-lighting.
May be placed on top of desk surface or mounted drop-in style. iQ frames can be
physically joined using included hardware. Unit weight: 9 lbs / 4 kg. Shipping
weight: 20 lbs / 9 kg.
iQ System Accessories
Telos iQ6 Six-Line Telco Gateway for iQ
P/N 2001-00248 POTS
P/N 2001-00255 ISDN U (2B1Q 2-Wire) Interface Card
iQ6 Telco Gateway
For use in Canada and USA
P/N 2001-00256 ISDN S (4-Wire) Interface Card
For use outside North America
Dual-hybrid iQ6 connects directly to your iQ via Ethernet - no discrete I/O needed.
Controlled by the Call Controller section of the iQ Telco Expansion Frame, or with
optional Telos VSet phone or included VX Producer call screening software.
Requires one unused Ethernet port on iQ Core or network switch. Each iQ6
purchase includes Telos VX Producer Call Screening Software. Rackmount, 1RU.
5
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,395.00
$2,395.00
$2,395.00
Section 3: Element Modular Control Surface
Element Console Systems – www.AxiaAudio.com/element/
Element Mainframes
U
P/N 2001-00172: Element 4-Position Mainframe
Width: 11.3 in (28.7 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00173: Element 8-Position Mainframe
Width: 18.3 in (46.5 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00174: Element 12-Position Mainframe
Width: 25.3 in (64.3 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00280: Element 14-Position Mainframe
Width: 29.25 in (74.3 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 22-position mainframe
with modules. Shown in Bronze on Charcoal
H
P/N 2001-00175: Element 16-Position Mainframe
Width: 32.3 in (82.1 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00176: Element 20-Position Mainframe
Width: 39.3 in (99.8 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00229: Element 22-Position Mainframe
Width: 42.8 in (108.7 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00177: Element 24-Position Mainframe
Width: 46.3 in (117.6 cm.), Front-to-back: 20.25 in. (51.5 cm.)
P/N 2001-00178: Element 28-Position Mainframe
Width: 53.3 in (135.4 cm.), Front-to-back: 20.25 in. (51.5 cm.)
Element 2.0 modular console is available in sizes from 4 to 28 positions, with
support for up to 40 faders in multiple linked frames. Element is designed to work
with the Axia PowerStation or Studio Mix Engine and plugs into the network with
a single CAT-6 Ethernet cable. Features four Program buses and four auxiliary
buses. A variety of module types provide control of mic/line inputs, telephones
and other devices. Enhanced, integrated features for phones and codecs include
auto-assigned mix-minus on each channel, easy talkback for remote talent
cueing, one-button off-air phone record mode, and optional integrated Telco line
switching. Show Profiles allow console “snapshots” with different preferences,
layouts and defaults to be loaded instantly, customizing the board to each show
or talent if desired. Includes digital EQ, Omnia dynamic mic processing, and many
other advanced features. Allows sharing of audio resources across multiple
studios. Requires user-supplied VGA monitor for metering and options display.
Element consoles require a power supply and mixing engine. Element may be
used with either a separate Element Power Supply (P/N 2001-00170) and
Studio Mix Engine (P/N 2001-00139), or the PowerStation all-in-one power
supply/mixing engine/audio I/O center (P/N 2001-00251) described later in this
section.
6
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$1,395.00
$1,495.00
$1,595.00
$1,645.00
$1,695.00
$1,745.00
$1,790.00
$1,895.00
$1,995.00
PowerStation Integrated Console Engine for Element – www.AxiaAudio.com/powerstation/
PowerStation Main integrated console engine
Power Supply + Mix Engine + Audio I/O
P/N 2001-00251
Axia PowerStation Main
$9,245.00
PowerStation is an all-in-one studio solution that combines audio I/O, a
console power supply, mixing engine and network switch into one easyto-deploy package. Each PowerStation Main provides:

4 Analog inputs and 6 Analog outputs

2 AES/EBU inputs and 2 AES/EBU outputs

2 Microphone inputs with selectable Phantom power

4 GPIO machine-control logic ports, each with 5 inputs and 5
outputs

An integrated network switch with 10 100Base-T Ethernet
ports, 4 100Base-T ports with PoE (Power over Ethernet), and 2
1000Base-T (Gigabit) ports with SFP

Heavy-duty power supply

Industrial CPU designed for harsh-environment reliability
Use PowerStation Main with an Element console as a standalone studio
solution, or connect to other Axia equipment as part of a larger IP-Audio
network. Simple Networking allows daisy-chain connection of up to 4
PowerStation-based studios without the use of an external network
switch. Connecting a PowerStation Aux (P/N 2001-00252) adds autoswitching redundant backup power and doubles audio I/O and GPIO
capacity. I/O can also be easily expanded using Axia Audio Nodes. Autosensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500 Watts.
Rackmount, 4RU. Shipping weight: 45 lbs. / 21.3 kgs. Mounting depth
requirement: 18” from rack rails to rear of unit, allowing for cable
connections.
PowerStation Aux
Redundant Backup Power Supply + Audio I/O Expansion
P/N 2001-00252
Connects with PowerStation Main (P/N 2001-00251); adds autoswitching redundant backup power and doubles audio I/O and GPIO
capacity. Each PowerStation Aux provides:

4 Analog inputs and 6 Analog outputs

2 AES/EBU inputs and 2 AES/EBU outputs

2 Microphone inputs with selectable Phantom power

4 GPIO machine-control logic ports, each with 5 inputs and 5
outputs

One 100Base-T Ethernet connection to PowerStation Main

Heavy-duty, auto-switching redundant backup power supply
for PowerStation Main
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 500
Watts. Rackmount, 4RU. Shipping weight: 40 lbs. / 18.2 kgs.
Axia PowerStation Aux
7
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$5,245.00
Element Console Systems, Continued
Axia StudioEngine console mixing engine
P/N 2001-00306
Axia StudioEngine
$5,095.00
The networked StudioEngine provides bulletproof mixing console signal
processing for Element mixing consoles. Each engine is equipped with
multiple simultaneous inputs, outputs, mix-minus feeds, monitor
signals, etc. and can provide EQ for multiple channels, voice dynamics,
studio headphone processing and multiple VMix (Virtual Mixer)
channels. Second-generation StudioEngine is fan-free for cool, silent instudio deployment and is equipped with Gigabit Ethernet ports, dualredundant internal power supplies with automatic switching for
complete peace of mind. Auto-sensing power supplies, 90VAC to
240VAC, 50 Hz to 60 Hz. 100 Watts. Rackmount, 2RU. May be used in
conjunction with 3001-00049 SoftSurface Virtual Console software to
create a powerful “virtual console” where space constraints do not
permit a physical mixing device.
DSP Engine Spare Power Supply
P/N 1771-00064
Engine Power Supply
$195.00
Field-replaceable internal power-supply for second-generation Telos
Zephyr iPort, Omnia.8X Audio Processor, Axia StudioEngine and Axia
Pathfinder Core PRO products. Auto-sensing, 90VAC to 240VAC, 50 Hz to
60 Hz. 100 Watts.
Fits part numbers 2001-00296, 2001-00304, 2001-00305, 2001-00306.
Element Power Supply + GPIO Node
P/N 2001-00170
Element Power Supply + GPIO Node
$3,395.00
Element 48VDC power supply One required for each Element console
using StudioEngine (above), in single or split-frame configurations —
not required for Element consoles using PowerStation. Includes 8
assignable GPIO logic ports; each port contains 5 opto-isolated inputs
and 5 opto-isolated outputs, which can be associated with audio
sources and/or destinations to provide machine start/stop pulses, lamp
drives, and remote channel controls. Additional GPIO capacity may be
added to Axia systems using Axia GPIO xNodes (P/N 2001-00301 or
2001-00302, see Section 7 for details). Rackmount, 2 RU; auto-sensing
power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 150 Watts.
8
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Element Modules
Pick Your Console Color
Choice is good! All Element 2.0 modules are available in your choice of bright Silver or bold Bronze, with tough Lexan surfaces and high-impact
paint to resist scuffing and wear.
Silver on Charcoal color scheme
Bronze on Charcoal color scheme
Module part numbers read “2001-2xxxx”
Module part numbers read “2001-3xxxx”
4-Fader Module w/ Rotary Options Ctl.
P/N 2001-20279 Silver
2001-30279 Bronze
4-Fader Module with Rotary Options Control
(shown in Silver)
4-fader module for use with any line, mic, hybrid or codec sources;
100mm long-life conductive-plastic faders, HOLD and SET controls for
Telos telephone hybrids. Rotary Options Control knob can be
programmed to trim source or fader gain when turned; invokes Options
screen when pressed. Includes alphanumeric channel displays.
Occupies 4 frame positions.
Motorized 4-Fader Module w/ Rotary Options Ctl.
P/N 2001-20203 Silver
2001-30203 Bronze
Motorized 4-Fader Module (shown in Silver)
$2,095.00
$2,995.00
Same features as 4-Fader module 2001-xx279 above, but with motorized
faders that work with Element Show Profiles or PathfinderPC software to
assume preset levels upon command. Includes alphanumeric channel
displays. Comes with required conductive Silver fader knobs.
Call Controller + 2-Fader Phone Module w/ Rotary Options Ctl.
P/N 2001-20280 Silver
2001-30280 Bronze
Call Controller + 2-Fader Phone Module with Rotary
Options Control (shown in Silver)
$2,095.00
This module integrates control of Telos Hx6, Nx12, Nx6, TWOX12, Series
2101 and VX telephone systems right into the console. 2-fader
telephone control module features integrated Telos Call Controller
with Status Symbols™. Rotary Options Control knob can be programmed
to trim source or fader gain when turned; invokes Options screen when
pressed. Includes alphanumeric channel displays. Occupies 4 frame
positions.
9
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Element Modules, Continued
Motorized Call Controller + 2-Fader Phone Module
w/ Rotary Options Ctl.
P/N 2001-20204 Silver
2001-30204 Bronze
Motorized Call Controller + 2-Fader Phone Module
(shown in Silver)
Identical to Call Controller 2001-xx280 above, but with motorized faders
that work with Element Show Profiles or PathfinderPC software to
assume preset levels upon command. Includes alphanumeric channel
displays. Occupies 4 frame positions.
Element Production Module
P/N 2001-20196 Silver
2001-30196 Bronze
Element Production Module (shown in Bronze)
$2,495.00
$2,095.00
The perfect addition for production studios. User panel gives direct
access to frequently-used production options, such as Send bus levels,
EQ settings, and stereo audio positioning tools. Includes overbridge
selector panel with alphanumeric source display. Occupies 2 frame
positions.
Film-Cap Switch Modules
5- & 10-Button Film-Cap Switch Modules
(shown in Bronze)
5-Button Film-Cap Switch Module
P/N 2001-20187 Silver
2001-30187 Bronze
10-Button Film-Cap Switch Module
P/N 2001-20188 Silver
2001-30188 Bronze
$645.00
$1,095.00
Film-cap buttons provide access to often-used machine-control or
software functions. Includes overbridge filler panel. Occupies 1 frame
position. Requires PathfinderPC (P/N 3001-0015).
LCD SmartSwitch Modules
5- & 10-Button LCD SmartSwitch Modules
(shown in Bronze)
5-Button SmartSwitch
P/N 2001-20189 Silver
2001-30189 Bronze
10-Button SmartSwitch
P/N 2001-20190 Silver
2001-30190 Bronze
$1,095.00
$1,595.00
Program these backlit LCD button panels using Axia PathfinderPC
software to provide 1-touch access to often-used machine-control or
software functions. In-button LCD display shows function readout.
Dynamic programming allows assigned functions to change with each
Show Profile or in response to user keypress. Includes alphanumeric
display. Occupies 1 frame position. Requires PathfinderPC (P/N 30010015).
10
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Element Modules, Continued
Single-Position Filler Module w/Overbridge Filler
Element Filler Module (shown in Bronze)
P/N 2001-20186 Silver
2001-30186 Bronze
$75.00
Blanking plate with overbridge filler panel. Occupies 1 frame position.
20 Station OLED Element Intercom Module
P/N 2001-20253 Silver
2001-30253 Bronze
20-Station OLED Element intercom module
(shown in Silver)
Part of the Axia IP Intercom system. Provides instant access to 20 preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator’s microphone;
returning audio is directed to the console’s preview (cue) speaker.
Includes Auto-answer, dedicated listen volume control, individual mic
and speaker mute keys and group talk functions. Overbridge display
works with Element monitor module numeric keypad to give direct
access to any station; can also be used to dial outside phone lines for
intercom conversations (using an optional telephone hybrid). Station
presets and GPIO functions are programmed using any standard Web
browser. Occupies 2 frame positions.
10 Station OLED Element Intercom Module
10-Station OLED Element intercom module
(shown in Silver)
$1,995.00
P/N 2001-20254 Silver
2001-30254 Bronze
$1,395.00
Part of the Axia IP Intercom system. 10-station Intercom module has 10character OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator’s microphone; returning audio is directed to the
console’s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
10 Station Film-Cap Element Intercom Module
10-Station Film-Cap Element intercom module
(shown in Silver)
P/N 2001-20255 Silver
2001-30255 Bronze
$1,045.00
Part of the Axia IP Intercom system. Affordable 10-Station intercom
module features 10 LED-lit film-cap buttons. Provides dedicated listen
volume control, speaker and mic mute buttons and single-button
calling of up to 10 preset stations. Mic audio is taken directly from the
console operator’s microphone; returning audio is directed to the
console’s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
11
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Element Modules, Continued
Element Console Director for Legacy Telos Phone Systems
(ONE-x-Six, Direct Interface Module, 1A2)
P/N 2001-20193 for consoles with Silver or
Bronze modules
$1,395.00
10-line, +12v telephone control module features line control and DTMF
functions. For use with Telos ONE-x-Six, Direct Interface Module and 1A2
Talkshow Systems. Faders not supplied; works in conjunction with
standard Element fader modules. Includes overbridge filler panel.
Occupies two frame positions.
10-Line Element Console Director
Element Console Director for NewGen Telos Phone Systems
(Nx6, Nx12, TWOx12, Series 2101)
P/N 2001-20243 for consoles with Silver or Bronze modules
$1,395.00
12-Line Element Console Director
12-line, +48v telephone control module features line control and DTMF
functions. For use with Telos Nx6, Nx12, TWOx12 and Series 2101
Talkshow Systems. Faders not supplied; works in conjunction with
standard Element fader modules. Includes overbridge filler panel.
Occupies two frame positions.
Monitor + 2-Fader Module w/ Rotary Options Ctl.
P/N 2001-20321 Silver
2001-30321 Bronze
$2,095.00
Monitor + 2-Fader Module with Rotary Options Control
(shown in Silver)
Space-saving module includes two faders. Includes numeric entry/dial
pad, basic Monitor/Headphone controls and SoftKnob overbridge
control set with alphanumeric display. 100mm long-life conductive
plastic faders. Rotary Options Control knob can be programmed to trim
source or fader gain when turned; invokes Options screen when
pressed. Includes alphanumeric channel displays. Occupies 4 frame
positions. One Monitor Module per console required.
Motorized Monitor + 2-Fader Module w/ Rotary Options Ctl.
28B
P/N 2001-20222 Silver
2001-30222 Bronze
Motorized Monitor + 2-Fader Module (shown in Silver)
Same features as 2001-xx321 above, but with motorized faders that
work with Show Profiles or PathfinderPC software to assume preset
levels. Includes SoftKnob overbridge control set and alphanumeric
display. Occupies 4 frame positions. One Monitor Module per console
required.
Monitor/Navigation Module
P/N 2001-20181 Silver
2001-30181 Bronze
Monitor/Navigation Module (shown in Silver)
$2,595.00
$2,095.00
Master module with Deluxe monitor, headphone and preview volume
controls, dedicated selection keys for Program, Aux Sends or External
monitor. Numeric entry/dialpad for use with Element Phone modules.
Nav pad for onscreen options control; profanity delay controls can be
linked to external delay unit. Includes SoftKnob overbridge control set.
Occupies 4 frame positions. One Monitor Module per console required.
12
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Element Accessories
Axia SoftSurface Virtual Console Software
P/N 3001-00049
Axia SoftSurface for Windows
Mic Control / Headphone Selector Panel
P/N 2001-20199 Silver
Mic Control / Headphone Selector Panel
$645.00
Deluxe in-studio accessory panel mounts in tabletop or turret. Provides
remote control of mic on/off functions; dedicated Mute and Talkback
buttons give talent full control of their position. Volume/selection knob
allows users to select their headphone monitor source; alphanumeric
display readout confirms their choice. Easily connects to Element
CANbus using CAT-5 cable. 6”x 2”, requires 2” mounting depth.
Headphone Selector Panel
P/N 2001-20200 Silver
Headphone Selector Panel
$995.00
New Axia SoftSurface gives you powerful real-time remote control of
your Axia Element 2.0 mixing console! With SoftSurface, you can operate
your Element from any PC connected to the Livewire network. Or, pair
SoftSurface with an Axia StudioEngine to create a virtual console that
you can control from remotes, transmitter sites — even from home.
SoftSurface makes an ideal companion for existing consoles; it’s also the
perfect audio mixing solution for limited-space locations. SoftSurface
remotely controls any physical Element console, and pairs with Axia
StudioEngine as a Virtual Console. Compatible with Windows Windows
7 operating systems; 20Mb free disc space required.
$595.00
In-studio accessory panel with volume/selection knob mounts in
tabletop or turret to allow users to select their headphone monitor
source; alphanumeric display readout confirms their choice. Two preset
buttons let talent set and quickly recall frequently-listened-to sources.
Easily connects to Element CANbus using CAT-5 cable. 6”x 2”, requires 2”
mounting depth.
Mic Control Panel
P/N 2001-20201 Silver
$395.00
In-studio accessory panel for remote control of mic on/off functions.
Mounts in tabletop or turret; includes dedicated Mute and Talkback
buttons. Requires 1 free Axia GPIO port per panel. 6”x 2”, requires 2”
mounting depth.
Mic Control Panel
Producer’s Mic Control Panel
P/N 2001-20202 Silver
Special accessory panel for producers mounts in tabletop or turret to
provide remote control of mic on/off functions, includes dedicated Mute
key. Two Talkback keys allow producers to talk to control room board
op, studio guests, or both. Requires 1 free Axia GPIO port per panel. 6”x
2”, requires 2” mounting depth.
Producer’s Mic Control Panel
13
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$445.00
Element Accessories, Continued
Blank Accessory Panel
P/N 2001-20207 Silver
$65.00
Filler panel for in-studio use. 6”x 2”.
Blank Accessory Panel
4-Button Element LCD SmartSwitch Panel
P/N 2001-20198 Silver
4-button Element LCD SmartSwitch Panel
$845.00
Program these backlit LCD button panels using Axia PathfinderPC
software to provide producers or talent with remote access to oftenused machine-control or software functions. In-button LCD display
shows function readout. Dynamic programming allows specific assigned
functions to change for each Show Profile or in response to user
activation. Requires PathfinderPC (P/N 3001-0015). Works with Element
consoles only; easily connects to CANbus using CAT-5 cable. Mounts in
tabletop or turret. 6”x 2”, requires 2” mounting depth.
5-Button Film-Cap Switch Panel
P/N 2001-20197 Silver
$495.00
Film-cap accessory switch panel for use at interview or producer’s
positions. Can be programmed to provide remote access to often-used
machine-control or software functions. Works with all Axia consoles.
Requires PathfinderPC (P/N 3001-0015) and 1 free Axia GPIO port per
panel. Mounts in tabletop or turret. 6”x 2”, requires 2” mounting depth.
5-Button Film-Cap Switch Panel
Element Fader Knobs in Color
P/N 1453-00054-101 Red
1453-00055-101 Blue
1453-00056-101 Gray
1453-00004-101 Black
1453-00034-101 Silver Conductive
Customize your Element console with these colored replacement fader
knobs. Red, Blue and Gray colored knobs quickly draw operator’s eye to
important fader positions during fast-paced show production; also
available in original Black. Silver Conductive knobs, standard on
Motorized Fader modules, can be used to dress up standard modules as
well. Price per knob, sold individually.
14
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$4.95
$4.95
$4.95
$4.95
$8.95
Section 4: Pathfinder Router Automation
Pathfinder Software – www.AxiaAudio.com/pathfinder/
PathfinderPC Router Control Software
P/N 3001-00015
PathfinderPC Router Control Software
Designed for automated routing control in small to medium-sized
facilities, PathfinderPC provides a central point of control, via IP, of up to
25 Axia devices in your plant. Capabilities include route or scene
changes based on scheduled events, GPIO closure or Silence Detect
trigger events. Includes one server license, which supports up to 10
PathfinderPC client or PathfinderPC Mini connections. Requires P2-400
MHz (or greater) PC, with 10/100 or 100/1000 Ethernet NIC running
Windows XP or Windows 2003 Server or better.
PathfinderPRO Router Control Software
P/N 3001-00043
PathfinderPRO Router Control Software
$1,995.00
$3,495.00
Enterprise version of PathfinderPC software contains all features found
in PathfinderPC plus additional capabilities tailored to facilities with
large physical plants or complex operational requirements. Controls an
unlimited number of Axia devices and supports unlimited PathfinderPC
client or PathfinderPC Mini connections; also supports direct Pathfinder
control of Element Motorized Faders, Element VMix Virtual Mixers and
more. Includes Translators for Pro-Bel General Router and General
Switcher Protocols, Sine Systems ACU-1 Protocol and BTools Protocol,
plus support for the SA Port Router application. Includes two server
licenses for backup server or server clustering. Requires P2-400 MHz (or
greater) PC, with 10/100 or 100/1000 Ethernet NIC running Windows
2003 Server or better (two PCs required for clustering installation).
PathfinderPC to PathfinderPRO Software UPGRADE
P/N 2011-00060
$1,695.00
Upgrades users of PathfinderPC to PathfinderPRO. License number of
previous PathfinderPC installation must accompany order to verify
upgrade eligibility.
Note: PathfinderPC purchases prior to 1 July, 2008 qualify for no-cost upgrade to PathfinderPRO. Contact your Axia
representative for details.
15
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Section 5: Routing Control Panels
X1 Router Control Panel, Rackmount
P/N 2001-20261
X1 Router Control Panel
$1,495.00
X1 Router Control Panel lets you instantly route any source on your
Livewire network to a pre-selected destination (any-to-one routing).
Scroll through available channels on the bright, high-visibility display
using the selector knob to its right; then press the “Take” key to make
your route change. 1RU rackmount package for convenient placement
anywhere control is needed. Requires 1 free Ethernet port.
Product Discontinued, Limited Availability — Call before ordering
X2 Router Control Panel, Rackmount
P/N 2001-20262
X2 Router Control Panel
$1,695.00
X2 Router Control Panel provides the routing functionality of two X1
Panels (any-to-one routing) in a single chassis; each separate control
routes any available network source to an individually pre-selected
destination. Requires 1 free Ethernet port.
Product Discontinued, Limited Availability — Call before ordering
XY Router Control Panel, Rackmount
P/N 2001-20263
XY Router Control Panel
OLED SoftSwitch Router Control Panel, Rackmount
P/N 2001-20260
8-button OLED SoftSwitch panel
$1,895.00
XY Router Control Panel lets you route any source to any destination
(any-to-any routing) with the click of a button. Choose your desired
audio stream, select your network output and press “Take” to route
audio. 1 RU package can be placed in any turret or rack. Requires 1 free
Ethernet port.
$1,595.00
8-Button OLED SoftSwitch provides high-visibility router control from
any studio turret or equipment rack. Its eight high-resolution OLED
(Organic Light-Emitting Diode) readouts can display text or bitmaps,
and can be seen from nearly any angle — across the table, or across the
room. Use PathfinderPC to program custom routing commands.
Requires PathfinderPC (P/N 3001-0015) and 1 free Ethernet port.
5-Button Film-Cap Switch Panel, Rackmount
P/N 2001-20223
5-Button Film-Cap Switch Panel, Rackmount
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 1 free
Axia GPIO port per panel.
16
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$595.00
Routing Control Panels, Continued
10-Button Film-Cap Switch Panel, Rackmount
P/N 2001-20224
10-Button Film-Cap Switch Panel, Rackmount
$895.00
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 2 free
Axia GPIO ports per panel.
15-Button Film-Cap Switch Panel, Rackmount
P/N 2001-20225
15-Button Film-Cap Switch Panel, Rackmount
17-Button LCD SmartSwitch Panel, Rackmount
P/N 2001-20232
17-Button LCD SmartSwitch Panel, Rackmount
$1,295.00
Film-cap rackmount accessory switch panel. Can be programmed to
provide 1-touch remote access to often-used machine-control or
software functions. Requires PathfinderPC (P/N 3001-0015) and 3 free
Axia GPIO ports per panel.
$3,195.00
Rackmount accessory switch panel with dynamic-text, backlit LCD
buttons. Can be programmed to provide remote access to up to 16
often-used machine-control or software functions at a time; multiple
pages of button assignments can be programmed for recall with just a
touch. Requires PathfinderPC (P/N 3001-0015) or PathfinderPRO (P/N
3001-00043) and 1 free Ethernet port per panel.
Router Selector Node
U
P/N 2001-00134
Router Selector Node
More than just a routing panel, the Router Selector node has its own
stereo audio inputs and outputs – both AES/EBU and analog – and a
front-panel headphone jack. Select sources from the Axia network and
send them to the built-in audio output; use input for convenient on-thefly connection of audio devices to the Axia network. Built-in screen
provides scrollable list of available audio streams, eight programmable
“radio buttons” give instant access to frequently used sources. Ideal for
news or production rooms, or TOC monitoring. Auto-sensing power
supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
17
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,195.00
Section 6: Axia IP Intercom System
IP Intercom Components – www.AxiaAudio.com/intercom/
IC.20 20-Station Intercom Panel
P/N 2001-20259
IC.20 Intercom Panel
IC.10X 10-Station Intercom Expander
P/N 2001-20257
IC.10X Intercom Expander
P/N 2001-20258
$3,345.00
IC.10 has 10 station presets with high-resolution 10-character OLED
displays for quick contact with frequently-called locations. Programmed
using a standard Web browser. Built-in speaker, front- and rear-panel
mic connections, 4-pin locking headset jack, analog I/O on XLR and
StudioHub-compatible RJ-45 connectors, GPIO connection for speaker
mute/dim and external line-status tallies. Requires one unused 100BaseT Ethernet switch port. Auto-sensing power supply, 90VAC to 240VAC,
50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
IC.1 10-Station Intercom Panel
P/N 2001-20256
IC.1 Intercom Panel
$1,995.00
ICX.10 pairs with IC.20 intercom panel, adds 10 station presets (each
with 10-character OLED display + talk and listen keys) to IC.20 for total of
30 station presets. Requires one unused 100Base-T Ethernet switch port.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts.
Rackmount, 1RU.
IC.10 10-Station Intercom Panel
IC.10 Intercom Panel
$3,995.00
IC.20 intercom panel has 20 station presets for quick contact with
frequently-called locations. Perfect for Master Control or TOC; keypad +
display gives fast access to stations system-wide, plus group talk and
auto-answer functions. Can also dial outside phone lines (using an
optional telephone hybrid). 2RU rackmount package features highvisibility 10-character OLED displays, built-in speaker, front- and rearpanel mic connections, 4-pin locking headset jack, analog I/O on XLR
and StudioHub-compatible RJ-45 connectors, GPIO connection for
speaker mute/dim and external line-status tallies. Requires one unused
100Base-T Ethernet switch port. Auto-sensing power supply, 90VAC to
240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 2RU.
Cost-effective way to add intercom capabilities to your studios! 10 LEDbacklit film-cap buttons can be labeled with station names;
programming is via Web interface. Built-in speaker and front-panel 4-pin
locking headset jack, front- and rear-panel mic inputs, analog I/O with
XLR and RJ-45 connectors, GPIO speaker mute/dim control. Requires
one unused 100Base-T Ethernet switch port. Auto-sensing power
supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
18
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,795.00
Axia IP Intercom System, Continued
20 Station OLED Element Intercom Module
P/N 2001-20253 Silver
2001-30253 Bronze
20-Station OLED Element intercom module
(shown in Silver)
Part of the Axia IP Intercom system. Provides instant access to 20 preprogrammed intercom stations. Individual talk and listen buttons and
high-rez OLED displays give fast access to frequently-called stations. Mic
audio is taken directly from the console operator’s microphone;
returning audio is directed to the console’s preview (cue) speaker.
Includes Auto-answer, dedicated listen volume control, individual mic
and speaker mute keys and group talk functions. Overbridge display
works with Element monitor module numeric keypad to give direct
access to any station; can also be used to dial outside phone lines for
intercom conversations (using an optional telephone hybrid). Station
presets and GPIO functions are programmed using any standard Web
browser. Occupies 2 frame positions.
10 Station OLED Element Intercom Module
10-Station OLED Element intercom module
(shown in Silver)
$1,995.00
P/N 2001-20254 Silver
2001-30254 Bronze
$1,395.00
Part of the Axia IP Intercom system. 10-station Intercom module has 10character OLED displays, Auto-answer function, dedicated listen volume
control, mute keys for speaker and mic. Mic audio is taken directly from
the console operator’s microphone; returning audio is directed to the
console’s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
10 Station Film-Cap Element Intercom Module
10-Station Film-Cap Element intercom module
(shown in Silver)
P/N 2001-20255 Silver
2001-30255 Bronze
$1,045.00
Part of the Axia IP Intercom system. Affordable 10-Station intercom
module features 10 LED-lit film-cap buttons. Provides dedicated listen
volume control, speaker and mic mute buttons and single-button
calling of up to 10 preset stations. Mic audio is taken directly from the
console operator’s microphone; returning audio is directed to the
console’s preview (cue) speaker. Station presets and GPIO functions are
programmed using any standard Web browser. Occupies 1 frame
position.
IC.1D 20-Station Filmcap Intercom Panel
P/N 2001-00271
20-station desktop intercom panel is perfect for producers, screeners,
etc. Can be placed anywhere. 20 LED-backlit film-cap buttons can be
labeled with station names and programmed using a built-in Web
interface and any browser. Features include OLED callback window to
permit identifying and answering multiple calls from any remote
stations not programmed on a local station key, built-in speaker and
front-panel 4-pin locking headset jack, front -panel mic input, and an
Ethernet port. Requires one 100Base-T Ethernet switch port. Autosensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts.
Measures 13.4” wide x 8.5” deep x 4.5” tall (34.1 cm x 21.6 cm x 11.5 cm).
19
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$2,295.00
Axia IP Intercom System, Continued
IC.20D 20-Station OLED Intercom Panel
P/N 2001-00272
$3,495.00
20-station desktop intercom panel is perfect for producers, screeners,
etc. Can be placed anywhere. 20 station presets with OLED displays can
be programmed to display frequently-called stations on the fly, or by
using the built-in Web interface and any browser. Features include an
OLED callback window that permits identification and full
communication with any remote stations not programmed on a preset
key, built-in speaker and front-panel 4-pin locking headset jack, frontpanel mic input, and an Ethernet port. Requires one unused 100Base-T
Ethernet switch port. Auto-sensing power supply, 90VAC to 240VAC, 50
Hz to 60 Hz. 30 Watts. Measures 18.2” wide x 5.9” deep x 5.6” tall (46.3
cm x 15 cm x 14.25 cm).
Axia SoftCom Intercom for Windows
P/N 3001-00048
Axia SoftCom for Windows
Site License
$995.00
Make any networked PC a part of your IP-Intercom system! Simple user
interface mimics control panel of IC-20 rack unit, with preset locations
for 20 frequently-called stations. Auto-answer and hands-free functions
are provided. Easy drop-down station finder gives instant access to
stations not pre-programmed. Site license — SoftCom may be installed
on any or every PC in your local facility for one purchase price. Software
requires a PC with Ethernet connection, sound card and mic/earphone
headset, running Windows XP or higher, with 20MB free disc space.
IP-Intercom Accessories
Panel Microphone for IP-Intercom
P/N 2091-00141
Telex MCP-90-8
Telex MCP-90-8 microphones are phantom-powered "back-electret"
miniature condenser gooseneck microphones. Removable windscreen
for pop filtering. Quickly and easily mounts to Axia IP-Intercom
equipment; frequency response is tailored for full-range sound
reproduction with natural sound pick-up optimized for close-up use –
perfect for situations where panel audio might be taken to air. Standard
threaded TRS male connector.
20
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$250.00
Section 7: xSwitch and xNode Audio Interfaces
xSwitch Zero-Configuration Ethernet switch for Livewire – www.AxiaAudio.com/xswitch/
xSwitch Ethernet Switch for Livewire
P/N 2001-00357
Axia xSwitch
$1,295.00
Zero-configuration Ethernet switch optimized for Livewire IP-Audio
applications. Fast setup requires only IP address assignment via frontpanel OLED display or Axia iProbe software. Web-based management
interface uses built-in HTTP server. Convenient front-panel display
provides port link status, PoE usage and SFP status, plus system
temperature. 9.5” x 11” half-rack form factor allows two xSwitches to be
racked side-by-side. Features 8 10/100MBit Ethernet ports — 4 with PoE
to power Axia xNodes, Telos VSet phones, and other networked devices
compatible with the IEEE 802.1af PoE standard. Two Gigabit ports are
provided for trunking, both with RJ-45 (copper) and SFP (fiber)
connections; supports redundant copper/SFP Gigabit connections with
auto-switching. Supports 2,000 Multicast groups and 2,000 ARP table
entries (8x more than other small-form Ethernet switches). Noiseless and
fan-free; can be conveniently placed adjacent to your audio devices,
rack-mounted, or wall-mounted (using one of the accessory kits listed
below). Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz.
75 Watts. Occupies 1RU when rack-mounted.
xNode Compact IP-Audio Interfaces – www.AxiaAudio.com/xnodes/
Analog xNode
AC power + PoE: P/N 2001-00298
PoE Only: P/N 2001-00309
Analog xNode
Compact 9.5” x 11” second-generation AoIP interface. Noiseless and fanfree; can be conveniently placed adjacent to your audio devices, rackmounted, or wall-mounted (using one of the accessory kits listed
below). 16-channel xNode provides 8 mono or 4 stereo balanced linelevel inputs and 8 mono or 4 stereo balanced line-level outputs,
accessible via easy-to-install RJ-45 connectors or high-density DB-25
ports. Inputs are switchable to accommodate consumer level -10dBv or
professional level +4dBu. The short-circuit protected outputs are
capable of delivering up to +24 dBu before clipping. Superior
performance specs include switchable 48 kHz / 96 kHz sampling rate,
108dB of dynamic range, <0.005% THD. Dual Ethernet ports allow
connection to fully-redundant networks. Redundant power plan autoswitches from internal supply (on models so equipped) to PoE backup
power when needed. PoE-only models draw power directly over
Ethernet from switches compatible with the IEEE 802.1af PoE standard;
perfect for single-cable deployment in tight locations. Requires one
unused 100Base-T Ethernet port for connection to an Axia network.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 14 Watts.
Occupies 1RU when rack-mounted.
Rack-mounting kit included with each xNode.
21
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$1,595.00
$1,495.00
xNode Compact IP-Audio Interfaces – continued
AES/EBU xNode
AC power + PoE: P/N 2001-00299
PoE Only: P/N 2001-00310
AES/EBU xNode
$1,595.00
$1,495.00
Compact 9.5” x 11” second-generation AoIP interface. Noiseless and fanfree; can be conveniently placed adjacent to your audio devices, rackmounted, or wall-mounted (using one of the accessory kits listed
below). 16-channel xNode provides 4 stereo digital AES3 inputs and 4
stereo digital AES3 outputs, accessible via easy-to-install RJ-45
connectors or high-density DB-25 ports. May also be used to receive AES
house master clock to synchronize the entire Livewire network.
Stunning performance specs include switchable 48 kHz / 96 kHz
sampling rate, 126dB of dynamic range, <0.0003% THD. Dual Ethernet
ports allow connection to fully-redundant networks. Redundant power
plan auto-switches from internal supply (on models so equipped) to PoE
backup power when needed. PoE-only models draw power directly over
Ethernet from switches compatible with the IEEE 802.1af PoE standard;
perfect for single-cable deployment in tight locations. Requires one
unused 100Base-T Ethernet port for connection to an Axia network.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 7 Watts.
Occupies 1RU when rack-mounted.
Rack-mounting kit included with each xNode.
Mixed-Signal xNode
AC power + PoE: P/N 2001-00300
PoE Only: P/N 2001-00311
Mixed-Signal xNode
$1,695.00
$1,595.00
Compact 9.5” x 11” second-generation AoIP interface with a mix of
analog, AES and GPIO connections makes this the perfect “utility node.”
Mixed-Signal xNode provides 1 Mic/Line analog input (switchable), 2
analog line inputs (dedicated), 3 analog line outputs, 1 digital AES3
input and 1 AES3 output, and 2 GPIO ports, each with 5 opto-isolated
inputs and outputs. Audio inputs are presented on easy-to-install RJ-45
connectors with 1 XLR provided for Mic input. GPIO ports are standard
DB-15 connections. Noiseless and fan-free; can be conveniently placed
adjacent to your audio devices, rack-mounted, or wall-mounted (using
one of the accessory kits listed below). Dual Ethernet ports allow
connection to fully-redundant networks. Redundant power plan autoswitches from internal supply (on models so equipped) to PoE backup
power when needed. PoE-only models draw power directly over
Ethernet from switches compatible with the IEEE 802.1af PoE standard;
perfect for single-cable deployment in tight locations. Requires one
unused 100Base-T Ethernet port for connection to an Axia network.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 14 Watts.
Occupies 1RU when rack-mounted.
Rack-mounting kit included with each xNode.
22
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
xNode Compact IP-Audio Interfaces – continued
Microphone xNode
AC power + PoE: P/N 2001-00297
PoE Only: P/N 2001-00308
Microphone xNode
$1,595.00
$1,495.00
Compact 9.5” x 11” second-generation AoIP interface. Noiseless and fanfree; can be conveniently placed adjacent to your mic clusters, rackmounted, or wall-mounted (using one of the accessory kits listed
below). 16-channel xNode provides 4 mic inputs with switchable
Phantom power, with preamp gain adjustable from -74dBu to -19dBu,
and 8 mono or 4 stereo balanced line-level outputs for headphone or
monitor feeds, accessible via easy-to-install RJ-45 connectors or highdensity DB-25 ports. Microphone xNode can also be used as a multipleinput mic preamp and A/D converter, or as the stage-end of a digital
snake. Short-circuit protected outputs are capable of delivering up to
+24 dBu before clipping. Recording-studio grade performance specs
such as EIN of < -128dB and THD of <0.005%. Dual Ethernet ports allow
connection to fully-redundant networks. Redundant power plan autoswitches from internal supply (on models so equipped) to PoE backup
power when needed. PoE-only models draw power directly over
Ethernet from switches compatible with the IEEE 802.1af PoE standard;
perfect for single-cable deployment in tight locations. Requires one
unused 100Base-T Ethernet port for connection to an Axia network.
Auto-sensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 14 Watts.
Occupies 1RU when rack-mounted.
Rack-mounting kit included with each xNode.
GPIO xNode
AC Power + PoE: P/N 2001-00301
PoE Only: P/N 2001-00312
GPIO xNode
$1,395.00
$1,295.00
Compact 9.5” x 11” second-generation AoIP interface with 6 GPIO ports
for control of peripheral devices. Each port is equipped with 5 optoisolated inputs and 5 outputs, presented on standard DA-15
connections, which can be associated with audio sources and/or
destinations to provide machine start/stop pulses, lamp drives, and
remote channel controls. Once a port is configured to be associated
with a particular device, it automatically activates with that device.
Noiseless and fan-free; can be conveniently placed adjacent to your
audio devices, rack-mounted, or wall-mounted (using one of the
accessory kits listed below). Dual Ethernet ports allow connection to
fully-redundant networks. Redundant power plan auto-switches from
internal supply (on models so equipped) to PoE backup power when
needed. PoE-only models draw power directly over Ethernet from
switches compatible with the IEEE 802.1af PoE standard; perfect for
single-cable deployment in tight locations. Requires one unused
100Base-T Ethernet port for connection to an Axia network. Autosensing power supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 7 Watts.
Occupies 1RU when rack-mounted.
Rack-mounting kit included with each xNode.
23
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
xNode Compact IP-Audio Interfaces – continued
xNode Rack-mount kit
P/N 2011-00076
Included
Shown for illustration only. Do not order separately.
Kit included with each xNode.
Kit contains all parts needed to convert xNodes to mount in a standard
19” broadcast equipment rack. Using supplied parts, xNodes may be
mounted either singly or side-byside in a 1RU space.
xNode Surface-mount kit
P/N 2011-00077
$45.00
Surface-mount kit allows you to mount a single xNode on any vertical or
horizontal flat surface. Mounting hardware attaches to xNode case,
holds xNode securely in position on walls, shelves, ceilings. Perfect for
deploying xNode in small spaces or utility rooms, etc.
Special-Purpose Audio Nodes
Router Selector Node
P/N 2001-00134
Router Selector Node
Omnia.8X Multi-Stream Networked Audio Processor
P/N 2001-00304 (replaces 2001-00206)
Omnia.8X
$2,195.00
More than just a routing panel, the Router Selector node has its own
stereo audio inputs and outputs – both AES/EBU and analog – and a
front-panel headphone jack. Select sources from the Axia network and
send them to the built-in audio output; use input for convenient on-thefly connection of audio devices to the Axia network. Built-in screen
provides scrollable list of available audio streams, eight programmable
“radio buttons” give instant access to frequently used sources. Ideal for
news or production rooms, or TOC monitoring. Auto-sensing power
supply, 90VAC to 240VAC, 50 Hz to 60 Hz. 30 Watts. Rackmount, 1RU.
$4,995.00
Multiple audio processors for full-bandwidth studio applications that
require minimal-delay throughput and maximum audio quality.
Omnia.8X combines eight separate 3-band stereo Omnia processors in a
single networked appliance for on-demand processing of multiple HD
Radio channels, sat-casting, Internet audio, studio production,
podcasting, headphone feeds, etc. Connects to your Axia Network using
a single CAT-6 cable for all I/O; pair with an Axia Audio Node for use as a
standalone multiple-stream audio processor. Second-generation DSP
processing platform is fan-free for cool, silent in-studio deployment and
is equipped with Gigabit Ethernet ports, dual-redundant internal power
supplies with automatic switching for complete peace of mind. Autosensing power supplies, 90VAC to 240VAC, 50 Hz to 60 Hz. 100 Watts.
Rackmount, 2RU. (Not designed for final AM or FM transmitter
processing.)
24
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Special Purpose Audio Nodes – continued
Zephyr iPort MPEG Gateway
U
U
P/N 2001-00305 (replaces 2001-00237)
Zephyr iPort
$5,995.00
Zephyr iPort enables broadcasters to transport multiple channels of
stereo audio across any network with guaranteed QoS — such as T1 and
T3 connections, MPLS networks, et cetera. Codec can be configured for
transport of eight stereo bi-directional MPEG streams, or as an MPEG
encoder for up to 16 stereo output streams. Connects to your Axia
Network using a single CAT-6 cable for all I/O; pair with an Axia Audio
Node for use as a standalone multiple-stream codec. Second-generation
DSP processing platform is fan-free for cool, silent in-studio deployment
and is equipped with Gigabit Ethernet ports, dual-redundant internal
power supplies with automatic switching for complete peace of mind.
Auto-sensing power supplies, 90VAC to 240VAC, 50 Hz to 60 Hz. 100
Watts. Rackmount, 2RU. (Not for use with non-QoS, public-Internet
connections.)
DSP Engine Spare Power Supply
P/N 1771-00064
Engine Power Supply
Field-replaceable internal power-supply for second-generation Telos
Zephyr iPort, Omnia.8X Audio Processor, Axia StudioEngine and Axia
Pathfinder Core PRO products. Auto-sensing, 90VAC to 240VAC, 50 Hz to
60 Hz. 100 Watts.
Fits part numbers 2001-00296, 2001-00304, 2001-00305, 2001-00306.
25
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$195.00
Section 8: Axia Software Applications
Axia SoftSurface Virtual Console Software
P/N 3001-00049
$995.00
New Axia SoftSurface gives you powerful real-time remote control of
your Axia Element 2.0 mixing console! With SoftSurface, you can operate
your Element from any PC connected to the Livewire network. Or, pair
SoftSurface with an Axia StudioEngine to create a virtual console that
you can control from remotes, transmitter sites — even from home.
SoftSurface makes an ideal companion for existing consoles; it’s also the
perfect audio mixing solution for limited-space locations. SoftSurface
remotely controls any physical Element console, and pairs with Axia
StudioEngine as a Virtual Console. Compatible with Windows Windows
7 operating systems; 20Mb free disc space required.
Axia SoftSurface for Windows
Axia SoftCom Intercom for Windows
P/N 3001-00048
Site License
Axia SoftCom for Windows
iProFiler Automated Program Archiving
P/N 3001-00033
$995.00
Axia version of popular Telos ProFiler logging software lets you
simultaneously capture up to 24 stereo audio channels to time-stamped
MP3 audio logs directly from your Axia IP-Audio network — no audio
cards required. CD-ROM includes software to record, manage and play
back archived audio files. Recording software runs under Windows XP
and later; playback software runs under Windows NT, Windows 2000,
Windows 98 or Windows XP and later. Record mode can be set for
logging, skimming, or combination of both. Logged audio may be
auditioned remotely via LAN, WAN, or Internet, if you choose. Minimum
hardware requirements: Pentium-IV, 2.4GHz processor (or equivalent)
with 512Mb RAM, 300Gb free hard-drive space (enough to continuously
archive 24 64kbps streams for two weeks) and a 100Base-T NIC.
iProFiler IP-Audio Logging Software
Web Link: www.AxiaAudio.com/logging/
iProbe Network Management Software
P/N 3001-00040
iProbe is an intelligent network maintenance and diagnostics tool that
makes managing, updating, and remote controlling your Axia system
easier than ever. There’s a powerful auto-documentation feature that
generates configuration docs for every device. The Organizer lets you
group Audio Nodes into logical groups for easy management, upload
software to single or multiple devices, make device configuration
backups and more — all from the comfort of your office. Requires P2400 MHz (or greater) PC, with 10/100 or 100/1000 Ethernet NIC running
Windows 2000 or XP.
8B92
Axia iProbe
$995.00
Make any networked PC a part of your IP-Intercom system! Simple user
interface mimics control panel of IC-20 rack unit, with preset locations
for 20 frequently-called stations. Auto-answer and hands-free functions
are provided. Easy drop-down station finder gives instant access to
stations not pre-programmed. Site license — SoftCom may be installed
on any or every PC in your local facility for one purchase price. Software
requires a PC with Ethernet connection, sound card and mic/earphone
headset, running Windows XP or higher, with 20MB free disc space.
26
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$495.00
Axia Software Applications, Continued
Axia IP-Audio Driver for Windows – 1 input, 1 output
P/N 3001-00017
$195.00
The Axia Windows® Driver connects PC audio directly to the network via Ethernet and
without sound cards. This software works with delivery systems and editors that
support standard Windows audio. Provides one stereo input and one stereo output
via the Livewire network.
Axia IP-Audio Driver for Windows – 24 inputs, 24 outputs
Axia IP-Audio Driver
P/N 3001-00024
$995.00
Multi-channel version of 3001-00017 (above) supports 24 stereo inputs and 24 stereo
outputs via the Livewire network, connecting PC audio directly to the network via
Ethernet and without sound cards.
NOTE: this software is not available for purchase directly from Axia. Description is
provided to assist in planning and pricing studio facilities. It may be ordered through Axia
delivery system partners; visit www.AxiaAudio.com/partners/ for a complete list.
HU
UH
Axia IP-Audio Driver for Linux – 24 inputs, 24 outputs
P/N 3001-00047
$995.00
Multi-channel IP-Audio Driver for Axia users with Linux-based software delivery
systems. Supports 24 stereo inputs and 24 stereo outputs via the Livewire network,
connecting PC audio directly to the network via Ethernet and without sound cards.
NOTE: this software is not available for purchase directly from Axia. Description is
provided to assist in planning and pricing studio facilities. It may be ordered through Axia
partner Paravel Systems; visit www.AxiaAudio.com/partners/ for contact information.
HU
UH
iPlay Network Stream Player for Windows
P/N 3001-00023
Software-based IP-Audio monitoring program lets Windows® PC users
select and listen to any audio source available to their Axia network.
Eight user-programmable preset buttons for quick access to frequentlyaccessed channels; on-screen level display meters auditioned audio.
Requires P2-400 MHz (or greater) PC, with 10/100 or 100/1000 Ethernet
NIC running Windows 2000 or XP.
Axia iPlay
27
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$95.00
Section 9: Axia Factory Services
On-Site System Configuration & Commissioning
Axia IP-Audio networks are easy to set up and configure, saving you significant time and money during installation. However, some clients prefer
to have us assist them during their first installation. An Axia support expert is available to assist U.S. clients with on-site network design,
hardware/software configuration and equipment training sessions at the following rates:
P/N 4000-00032: One Day of On-site services – Domestic
$3,699.00*
This includes one full day of on-site time as well as airfare, there-and-back travel time, hotel, meals, local transport and all incidental expenses.
P/N 4000-00033: Additional Days of On-site services – Domestic
$1,749.00*
This includes one full day of on-site time as well as hotel, meals, local transport and all incidental expenses.
P/N 4000-00034: One Day of On-site services – International
$1,359.00 + expenses
This includes one full day of on-site time. Expenses include but are not limited to travel, lodging and meals.
**Note: Travel to Top 10 markets, or IRS-defined “high cost areas” may incur a surcharge of up to $200.00/day to cover inflated hotel rates for these regions.
28
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Section 10: Console Service Kits
Element Service Kits
Element Deluxe Spares Kit
P/N 2011-00052
$395.00
Comprehensive set of spare parts for the Axia Element includes:
Element 8-position mainframe
with modules
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Element Fader Knob
(2) Element Fader Knob
(3) 1/2" Rotary Encoder Caps (for SoftKnobs & Studio Monitor knobs)
(3) 3/4" Rotary Encoder Caps (for CR Monitor knobs & Scrub Wheel)
(1) Element CR Monitor/HP Volume Rotary Encoder
(1) Element SoftKnob Rotary Encoder
(1) Element 5-volt Power Brick
Element Maintenance Spares Kit
P/N 2011-00053
$295.00
Maintenance parts kit for the Axia Element includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Element Fader Knob
(2) Element Fader Knob
(3) 1/2" Rotary Encoder Caps (for SoftKnobs & Studio Monitor knobs)
(3) 3/4" Rotary Encoder Caps (for CR Monitor knobs & Scrub Wheel)
(1) Element CR Monitor/HP Volume Rotary Encoder
DSP Engine Spare Power Supply
P/N 1771-00064
Engine Power Supply
Field-replaceable internal power-supply for second-generation Telos
Zephyr iPort, Omnia.8X Audio Processor, Axia StudioEngine and Axia
Pathfinder Core PRO products. Auto-sensing, 90VAC to 240VAC, 50 Hz to
60 Hz. 100 Watts.
Fits part numbers 2001-00296, 2001-00304, 2001-00305, 2001-00306.
29
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$195.00
iQ Service Kits
iQ / Radius Maintenance Spares Kit
P/N 2011-00070
$85.00
Maintenance parts kit includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Fader Knob
(2) Spare Fader Knobs
iQ Main + Phone Expansion Frame
iQ Control Surface Circuit Board Replacements
P/N 1701-00361-100: iQ Meter Board + OLED Displays
$309.00
P/N 1701-00265-100: iQ / Radius Logic Mainboard
$309.00
P/N 1701-00262-100: iQ / Radius Front-Panel Control Board
$1,029.00
QOR.32 Spares
P/N 1281-00079-100: 48-Volt Power Supply
Main internal power supply
QOR.32 engine/power supply/CPU
P/N 1701-00271-100: Mainboard
Lower main circuit board
P/N 1701-00272-100: Audio/GPIO Board
Logic & Audio I/O riser board
30
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$295.00
$1,699.00
$799.00
Radius Service Kits
iQ / Radius Maintenance Spares Kit
P/N 2011-00070
$85.00
Maintenance parts kit includes:
(1) Conductive Plastic Fader Assembly consisting of:
(1) Fader
(1) Cable
(1) Fader Knob
(2) Spare Fader Knobs
Radius 8-fader console
Radius Control Surface Circuit Board Replacements
P/N 1701-00270-100: Radius Meter Board + LED Displays
$309.00
P/N 1701-00265-100: iQ / Radius Logic Mainboard
$309.00
P/N 1701-00262-100: iQ / Radius Front-Panel Control Board
$1,029.00
QOR.16 Spares
P/N 1281-00079-100: 48-Volt Power Supply
Main internal power supply
QOR.16 engine/power supply/CPU
P/N 1701-00271-100: Mainboard
Main circuit board
31
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$295.00
$1,699.00
Section 11: Partner Products Available from Axia
Professional Studio Audio Cables
Adapter cables are custom-made to facilitate speedy hookup of audio sources to Axia Audio nodes and compatible equipment. Available in
traditional 8” (200mm) lengths or new 6’ (2m) lengths.
8” / 200mm. Adapter Cables
Standard-length short Stereo analog cables; 2 inputs each
P/N 2091-00129 Adapter, XLR Female to RJ-45 Female
P/N 2091-00130 Adapter, XLR Male to RJ-45 Female
P/N 2091-00131 Adapter, ¼" TRS to RJ-45 Female
P/N 2091-00132 Adapter, RCA phono dual plugs to RJ-45 Female
$18.95
$18.95
$18.95
$18.95
6’ / 2m. Adapter Cables
In addition to extra length, these cables’ male RJ-45s plug directly into Axia nodes without the need
for an intermediate patch cable. The perfect, convenient single-cable solution for easily placing
sources and Nodes in adjacent EQ racks!
Extra-long Stereo analog cables; 2 inputs each
P/N 2091-00123 Adapter, dual XLR Female to RJ-45 Male
P/N 2091-00124 Adapter, dual XLR Male to RJ-45 Male
P/N 2091-00125 Adapter, dual ¼" TRS to RJ-45 Male
P/N 2091-00126 Adapter, dual RCA phono plugs to RJ-45 Male
H
32
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
$27.95
$27.95
$27.95
$27.95
Radio Systems StudioHub+® Products
StudioHub+ Headphone Amp Panel
P/N 2091-00118 Silver
Headphone Amp Panel
StudioHub+ Match Panel
P/N 2091-00119 Silver
Match Panel
$279.00
Amplified stereo headphone panel with level control to drive high-impedance (greater
than 100 ohm) professional headphones. Provides high output level at low distortion.
Rear input connectors are to StudioHub+ RJ-45 wiring standards for plug-and-play CAT-5
connectivity to all Axia Node analog outputs. Two connectors (in parallel) are provided for
"loop-thru" audio feeds. 90-230VAC universal table-top power supply included. 6”x 2”,
requires 2” mounting depth.
$279.00
Dual input and output stereo matching amplifiers to convert consumer/unbalanced to
pro/balanced signals. Both RCA and 1/8" TRS (mini) connectors are provided Rear input
and output connectors are to StudioHub+ RJ-45 wiring standards for plug-and-play CAT-5
connectivity to all Axia nodes. 90-230VAC universal table-top power supply included. 6”x
2”, requires 2” mounting depth.
StudioHub+ Microphone Preamp Panel
P/N 2091-00121 Silver
$195.00
Mic pre-amplifier with balanced / line-level output, internal gain straps and phantom
power (15VDC) capability. Rear output connector is to StudioHub+ RJ-45 wiring standards
for plug-and-play CAT-5 connectivity to all Axia nodes. 90-230VAC universal table-top
power supply included. 6”x 2”, requires 2” mounting depth.
Microphone Preamp Panel
StudioHub+ XLR I/O Panel
P/N 2091-00120 Silver
$129.00
Female XLR connector for mic or line-level signal connectivity to Axia nodes via
StudioHub+ RJ-45 connectors. Internal jumpers for chassis and XLR grounding options.
Panel is passive and provides no amplification. 6”x 2”, requires 2” mounting depth.
XLR I/O Panel
33
All prices shown are suggested U.S. Retail Price. Prices may be higher outside of the U.S. due to duties, taxes, freight
and customs charges, and other factors beyond our control.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement