Accessing via Web Browser
Accessing via Web Browser
Hikvision DVR/NVR can be accessed via web browsing. It provides the functionalities of live view, playback, log
management, and configuration, etc.
Note: This instruction is written basing on the DVR model DS-9016HFI-ST V3.0.2 firmware, the web interface of
different DVR model/firmware version might look different.
Login .................................................................................................................................................................. 1
Live View .......................................................................................................................................................... 1
Search and Playback .......................................................................................................................................... 3
Log Management ............................................................................................................................................... 4
Configuration ..................................................................................................................................................... 4
Login
Steps:
1. Run the web browser, input the IP address of the DVR/NVR in the address bar, and then press the Enter key.
The login interface appears.
2. Input the user name and password of the DVR/NVR.
3. Click Login.
 If the http port of DVR/NVR is not default 80, please enter the complete IP address including http port to
access the DVR/NVR. (An example of complete address is http://192.0.0.64:81)
 The user name and password are admin and 12345 by default.
When you log in for the first time, the system will remind you to install the plug-in control. After the installation,
you will be able to live view or playback from the DVR/NVR.
Live View
Click the Live View tab to open the Live View page.
On the Live View page, you can view the live video of the added cameras and do some basic operations, including
picture capturing, manual recording, PTZ control, etc.
Live View Page:
① Channel List: Displays the list of channels and the playing and recording status of each channel.
② Live View Window: Displays the image of channel, and multi-window division is supported.
③ Live View Toolbar: Play control operations are supported.
④ PTZ Control: Pan, tilt, zoom operations are supported, as well as preset and patrol editing and calling (only
available for PTZ cameras).
⑤ Video Parameters Configuration: Brightness, contrast, saturation and hue of the image can be modified.
On the Live View page, the following toolbar buttons are available:
Button
Description
Button
Select the window-division mode
/
Start/Stop all live view
/
/
Capture pictures in the live view
Start/Stop all recording
/
Previous page

Open/Close audio
Start/Stop two-way Audio
Adjust volume
mode
/
Description
Enable/Disable digital zoom
Next page
To switch the stream type for remote live view to main stream or sub-stream, please refer to the local
configuration chapter.
Starting the Live View
Steps:
1. Click to select a live view window on the Live View page.
2. Double-click the camera on the channel list to start the live view;
or you can also click the icon
on the toolbar to start the live view of all cameras on the channel list.
3. To stop the live view, double-click the camera on the channel list again; or click the icon
on the toolbar.
Search and Playback
Click the Playback tab to open the Playback page
The record files stored on the HDDs of the DVR/NVR can be searched and played back remotely via the web
browser.
Playback Page:
① Channel List: Displays the list of channels and the playing status of each channel.
② Playback Window: Displays the image of channel.
③ Playback Toolbar: Play control operations are supported.
④ Time Line: Displays the time bar and the records marked with different colors.
⑤ Playback Status: Displays the playback status, including channel number and playback speed.
On the Playback page, the following toolbar buttons are available:
Button
/
/
Description
Button
Description
Select the window-division mode
Play reverse
Play/Pause
Stop
Slow down
Speed up
Play by single frame
Capture
Stop all playback
Download
Video clip
/
Open/Close audio
Starting the Playback
Steps:
1.
Select a camera from the channel list on the Playback page.
2.
Select the day on the calendar.
3.
Click Search. The record files of the selected camera will be indicated on the time line, and record files of
different types are color coded.
4.
5.
Click the icon
on the toolbar to start the playback.
You can click on the time line to specify the time for playback;
or input the specified time in the text field
6.
To stop the playback, click the icon
, and then click the icon
.
on the toolbar.
If there are record files for that camera in that day, on the calendar, the icon for that day is displayed as
Otherwise it is displayed as
.
.
Log Management
The log files of the DVR/NVR can be viewed and exported if needed. Multiple types of logs are supported,
including operation, alarm, exception and information of DVR/NVR.
Before you start:
Log Management function is available only when the DVR/NVR is connected with HDD or network disk. And
make sure the HDD or network disk has been initialized for storage.
Steps:
1.
Click the Log tab to Open the Log page.
2.
Select the major type and minor type of logs from the drop-down list.
3.
Click the icon
4.
Click Search. The logs between the start time and end time will be displayed on a list, and you can view the
to specify the start time and end time for search.
type, channel No., and other information of the logs.
5.
Click the icon
, and you can save the logs to the local directory.
Up to 100 items of logs can be displayed on each page.
Configuration
Click on the Configuration tab to open the configuration page, local configuration and remote configuration are
included.
Local configuration is the performance setting related to the pc that accesses the DVR/NVR. For example, you
could set the connection protocol between your PC and DVR/NVR as TCP or UDP, configure the live view stream
on your PC as either main stream or sub stream, or configure to which path you want to save the snapshots during
live view on the web, etc. For more local configuration options, please refer to the picture below.
Remote configuration is to remotely set the parameters of the DVR/NVR, including camera settings, network
settings, alarm settings, HDD management, etc.
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement