Solar 2014 - ACDC Dynamics
DISTRIBUTED SOLAR POWER SYSTEMS
Short Form Catalogue 2014
I
25
Years
• Inverter •
• Inverter •
r • I nv
er
t
er
erte
nv
r
te
Warranty
erter • Inver
nv
I
www.acdc.co.za
SOLAR DC POWER KITS
Economy Solar home systems are pre-packed kits providing simple power and lighting solutions for applications such as low cost housing and
remote rural installations.
Solar Shed Light
Solar Torch
Solar Camp Light
Solar Desk Lamp
BSS-00207
BSS-00213
High Quality
PV
1000 cycles
Lithium
Battery
Super Bright
LED
Code
BSL-P0807W
Battery Life
5hrs full charge
Battery Type
Lamp Power/ Lumen
PV Panel
Accessories
Packing Size
Lithium
0.4W / 35lm
BSS-00107
Lithium
Lithium
7hrs full charge
1W Polycrystalline
145 x 110 x 185mm
160 x 92 x 145mm
Lamp Holder
Carry Holder, cell accessories
125 x 155 x 80mm
165 x 155 x 170mm
Solar Junior Light
1W Polycrystalline
1.2/ 0.6W / 110 / 20lm
0.5W Polycrystalline
PV Panel Holder, Pull cord
5/ 11/ 66hrs full charge
0.6W / 50lm
1W Polycrystalline
Solar Lantern
Lithium
24/ 6hrs full charge
0.7W / 45lm
Cell accessories
Solar Junior Light 2
Solar Home Light
Spare Lamp- BSS-LAMP
Spare Lamp- BSS-LAMP
Solar Powerpack 3.0
High Quality
PV
Rechargeable
battery
Super Bright
LED
Code
Battery Type
Lithium
BSS-00303-2
BSS-00311S
Lead Acid
Lithium
BSS-00504S
Lithium
BSS-00318
Lithium
7hrs full charge
10hrs full charge
18/ 9hrs full charge
72/ 18hrs full charge
High: 4hrs, Low: 11hrs
PV Panel
2.5W Polycrystalline
2.5W Polycrystalline
2.5W Polycrystalline
5W Polycrystalline
3W Polycrystalline
Packing Size
430 x 160 x 145mm
205 x 170 x 335mm
270 x 160 x 145mm
315 x 270 x 200mm
155 x 145 x 290mm
Battery Life
Lamp Power/ Lumen
Accessories
High Quality
PV
1000 cycles
Lithium
Battery
Super Bright
LED
Code
Battery Type
Battery Life
Lamp Power/ Lumen
1.5W / 120lm
Cell Accessories
1.2W / 110lm
0.6W / 50lm
Carry Holder
Cell Accessories
Solar Home Light 2
Solar Home Light 3
Spare Lamp- SLL-L1515
Spare Lamp- SLL-L1515
Lithium
Lithium
BSS-00504LH
8/ 4hrs full charge
1.5W / 120lm
BSS-01004LH
Cell Accessories
Solar Complete Home Kit
Solar Complete Home Kit
JY-30
JY-60
Lead Acid
Lead Acid
30W Polycrystalline
60W Polycrystalline
DC fan, Cell accessories
15" TV, DC Fan, cell accessories
Mixed package
Mixed package
1.5W / 120lm
10W Polycrystalline
Packing Size
450 x 160 x 210mm
450 x 240 x 320mm
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Cell Accessories
1W
8hrs full charge
5W Polycrystalline
Cell Accessories
0.5W / 50lm
18/ 9hrs full charge
PV Panel
Accessories
1
BSS-00314LH
Cell Accessories
SOL
3W / 290lm
8hrs full charge
5W / 360lm
SOLAR DC POWER KITS
Specifically designed to provide simple lighting and power solutions to remote areas, these kits can be easily adapted for use in applications such as low cost housing,
camping etc.
Solar Barber Kit
Ecoboxx Qube 50
Ecoboxx Qube 90
ECOBOXX 50
ECOBOXX 90
AGM Lithium
AGM Lithium
Up to 16hrs full charge
Up to 30hrs full charge
High quality
PV
Rechargeable
battery
Super bright
LED
Code
Battery Type
BARBER KIT
AGM Lithium
Battery Life
Up to 16hrs full charge
PV Panel
2x10W Polycrystalline
Lamp Power/ Lumen
2x2W/ 160lm
Ecoboxx Qube 160
c/w 100W inverter
ECOBOXX 160
AGM Lithium
Up to 52hrs full charge
2x3W/ 324lm
4x3W/ 324lm
5W Polycrystalline
10W Polycrystalline
2x10W Polycrystalline
USB to charge Phone
USB to charge Phone
USB to charge phone
604 x 415 x 373mm
2x3W/ 324lm
Accessories
10 in 1 USB phone charger,
Packing Size
403 x 292 x 355mm
520 x 495 x 393mm
500 x 415 x 373mm
Solar Travel Light
Portable 4 Lamp Home Kit
Portable 6 Lamp Home Kit
Solar Basic Light
BX-H09
MRD-426
MRD-308
DE-303
Lead Acid
Lithuim
Lead Acid
Ni-Mh
hair clipper & USB Fan
High quality
PV
Rechargeable
battery
Super bright
LED
Code
Battery Type
Battery Life
80/4hrs full charge
17hrs full charge
10hrs full charge
9hrs full charge
PV Panel
1.7W Polycrystalline
18W Monocrystalline
USB, cell charger
40W Monocrystalline
USB, cell accessories
5W Polycrystalline
165 x 175 x 180mm
Mixed package
Mixed package
430 x 170 x 150mm
Solar Camping Bag
Solar Carry Bag
Solar Collector
Solar Cell Phone Charger
BB-01
CB-03
Li-Ion
SC-17PRO
Li-Ion Battery, 5V 500mAh
ES-130
Lithium, 3000mAh
4hrs full charge
4hrs full charge
2hrs
Dependant on device
-
-
-
-
1.2W Amorphous
1.5 Amorphous
Polycrystalline Silicone
0.7W Polycrystalline
AC/DC Charger 5V/800mA
AC/DC Charger 5V/800mA
4 Adaptors
iPhone/ iPod, Blackberry,
Phone connectors 4pcs
Phone connectors 4pcs
Lamp Power/ Lumen
Accessories
Packing Size
1W / 380lm
Cell accessories, AC Adapter
3W / 270lm
3W / 270lm
c/w charger
1W / 120lm
3m cable
High quality
PV
Rechargeable
battery
Super bright
LED
Code
Battery Type
Battery Life
Lamp Power/ Lumen
PV Panel
Accessories
Li-Ion
SOL
Samsung
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
2
SOLAR LIGHTING KITS
The outdoor lighting has long been associated with solar technology. ACDC provides another new range of Solar lighting. These products include Solar
Panels and batteries.
Security Flood Light IP56
Solar Night Light IP44
Solar Detector Light IP44
Solar Spot Light IP44
Internal
battery
rechargeable
Lead Acid
Super bright
LED
BSSJ10
BSSJ23
BSSJ03
8hrs full charge
24hrs full charge
24hrs full charge
PV Panel
18W Polycrystalline
0.4W Polycrystalline
1.8W Polycrystalline
10W Polycrystalline
Packing Size
280 x 225 x 90mm
180 x 105 x 60mm
300 x 145 x 170mm
Code
Battery Type
Battery Life
Lamp Power/Lumen
Accessories
Lead Acid
10W / 550lm
Mounting kit
Solar Security Light IP54
Lithium
1W / 112lm
Code
Battery Life
Lamp Power/Lumen
PV Panel
Specifications
Code
Battery Life
Lamp Power/Lumen
PV Panel
Specifications
3
Infra-Red Motion Detector
120 x 80 x 100mm
High Power Solar Light
Lead acid
8hrs full charge
2x2 3W / 500lm
Mounting kit
Solar Courtyard Light IP44 Solar Flood Light IP44
PIR
10m detection
& Timesr
BX-GY-02
BSSDM02
24hrs full charge
24hrs full charge
6hrs full charge
8hrs full charge
1.8W Polycrystalline
12W Polycrystalline
10W Polycrystalline
23W Polycrystalline
Ni-MH
3W / 310lm
Mounting kit included
Solar Security Light
BSSJ22
Lead Acid
BSSJ12
Lead acid
18W / 1485lm
3.5W / 378lm
PIR, Day Night Sensor
Solar Motion Light
Mounting kit
Lead Acid
1.8W / 196lm
PV Panel Holder
Solar Guard Light
Top View
High Quality
PV
Rechargeable
Lead Acid
battery
Super bright
LED
Battery Type
3.5W / 378lm
Infra-Red Motion Detector
High Quality
PV
Rechargeable
Lead Acid
battery
Super bright
LED
Battery Type
BSSJ09
Lithium
ESL-09
ESL-08
BSS7CLPL
4hrs on bright
13hrs full charge
3W Polycrystalline
10W Polycrystalline
night
Bulk System
Li-ion 3.7V 8000mAh
Li-ion 3.7V 4000mAh
7W/700lm
3W/300lm
4hrs on bright
3W Polycrystalline
PIR Sensor. Off in daytime, Bright light at
night
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
PIR Sensor. Off in daytime, Bright light at
SOL
SOL
Lead Acid
43W / 460lm
Day Night Sensor
SOLAR GARDEN LAMPS
Plastic Series
• Batteries Included
• Height does not
include spike
Code IP44
Size (mm)
Type
Batteries
Stainless Steel
Series
RW-SF-03-8
220H x 115Ø
1 x LED
1 x NiMh 600mAh
RW-SF-03-2
310H x 120Ø
1 x LED
1 x NiMh 600mAh
RW-SF-02-1
420H x 138Ø
1 x LED
1 x NiMh 600mAh
RW-SF-03-4
200H x 115Ø
1 x LED
1 x NiMh 600mAh
• Batteries Included
• Height does not
include spike
Code IP44
Size (mm)
Type
Batteries
Stainless Steel
Series
RW-SLS004
260H x 115Ø
1 x LED
1 x NiMh 600mAh
E2009
200H x 150Ø
1 x LED
1 x NiMh 600mAh
RW-SLS001
420H x 150Ø
1 x LED
1 x NiMh 600mAh
RW-SLS002
420H x 115 x 175
1 x LED
1 x NiMh 600mAh
• Batteries Included
• Height does not
include spike
With
Mosquito
Repeller
Lawn & Table
Light
Code IP44
Size (mm)
Type
Batteries
Stainless Steel
In-ground Series
IP44
RW-SLS003
SDBX115
ESL-10
SL-04M
290H x 125Ø
1 x LED
1 x NiMh 600mAh
420H x 170Ø
1 x LED
1 x NiMh 600mAh
800mm (H)
1 x LED
Li-ion Battery Rechargable
510(H) x Ø110mm
1 x LED
Li-ion Battery, 3.7V 450mAh
RW2LED-120
RW3LED-120
SDDM002
SDDM002-2
• Batteries Included
**Battery life: 3yrs
Code
Size (mm)
Type
Batteries
Aluminium
Paving Lamp
IP44
Code
Size (mm)
Type
Batteries
Replacement
Batteries
- Ni-MH
120Ø x 35D
2 x white LED
1 x NiMh 600mA
RW-SLR001
120Ø x 35D
1 x LED
1 x NiMh 600mA
BC1
AA (1.2V)
120Ø x 35D
3 x white LED
2 x NiMh 600mA
125 x 125
4pcs Superbright white LED
NiMh 600mAh
RWSLB003
RW-SLB002
Plastic
Floating
Lamp
IP67
120Ø
2 x LED
1 x NiMh 600mA
N1800AA (1800mAh)
N2300AA (2300mAh)
N2500AA (2500mAh)
N2800AA (2800mAh)
LIT
160Ø
2 x LED
1 x NiMh 600mA
AAA (1.2V)
125 x 125
RGB colour changing
NiMh 600mAh
Plastic
Spot
Lamp
IP67
RW-SLP006
160D x 85W x 330H
1 x LED
1 x NiMh 600mA
N750AAA (750mAh)
N800AAA (800mAh)
N1000AAA (1000mAh)
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
4
LED SOLAR LIGHTS
c/w motion sensor
Code
Rated Power
Battery
PV Panels
Working time
Detection distance
Dimensions
5-10W - Self-contained
c/w Daylight sensor
RW-X12A
RW-X12B
LS48M-2
LS48M-5
5 W (Watts), 240Lm
7.4V 2000mA
5W Monocrystalline
30 sec (PIR sensor)
5-7m
55H x 221W x 320D
2 W (Watts), 120Lm
3.7V 2000mA
2W Amorphous
30 sec (PIR sensor)
5-7m
55H x 221W x 320D
16pcs 3528 LED
3.7V, 800mAh
1.0W Amorphous
50 sec (PIR sensor)
2m
80H x 95W x 125D
16pcs 3528 LED
3.7V, 800mAh
1.0W Amorphous
8hrs (fully charged)
80H x 95W x 125D
COMPACT SOLAR STREET LIGHTING IP65
• Ideal for Eco Estates.
• All in one Battery and Solar panel
• Colour Temp: 6000-7000k
• Light is dim when no movement
(Top View)
Code
LS48-5
LS48-8
LS48-10
LS48-20
LS48-30
LS48-40
Power
5W
8W
10W
20W
30W
40W
Solar Module
12W
18W
23W
70W
100W
135W
Lumen Bright Mode
410lm
680lm
810lm
1600lm
2400lm
3200lm
Lumen Dim Mode
120lm
200lm
270lm
800lm
1200lm
1600lm
10hrs (bright)
30hrs (dim)
10hrs (bright)
30hrs (dim)
Working Time
* Pole not included
20-40W - Split Module
• Low cost installation - no cabling
• PIR Sensor
• c/w Lithium battery in body
• Luminosity is increased when a person is
detected by PIR Sensor
8hrs (bright)
24hrs (dim)
8hrs (bright) 10hrs (bright) 10hrs (bright)
24hrs (dim) 30hrs (dim)
30hrs (dim)
Installation Height
2.5-3m
3-4m
3-5m
5-8m
8-10m
8-10m
Dist. btwn.Poles
8-10m
10-15m
13-18m
20m
25m
25m
LUX
8.6lux @3m 9.4lux @ 4m 7.9lux @ 5m 9.2lux @ 20m 8.9lux @ 25m 8.9lux @ 25m
Size - LxWxD
568 x 306 x
56mm
688 x 306 x
56mm
SOLAR GARDEN LIGHTING
Solar garden lights are self contained units for parks, complex’s
and housing developments.
818 x 306 x
56mm
892 x 817 x
228mm
• Maintenance free
• Sealed battery c/w Battery Box
Code
Light Led
Solar Panel
Controller
Battery
Pole Height
Battery Life
5
LM-TT011
15W
40W/18V
12V/5A
50AH/12V
3M
8hrs
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
LM-TT012
12W *2
70W/18V
12V/5A
80Ah/12V
3M
8hrs
SOL
1252 x 817 x
228mm
STREET LIGHTING
Accessories
SOL-10/24
These lights are easy to install
and low to no maintenance is
required.
These systems are complete kits.
892 x 817 x
228mm
BAT-BOX1
LU56W-24VDC
Code
SOL-10/24
LIT
Description
10A/ 24V controller
LED light 24VDC, cool
LU56W-24VDC
white(5500K) 28LUX @ 8m IP65.
Spigot size 60mmØ
Battery Box for 2 x 80AH/12V
BAT-BOX1
batteries + solar controller
Size: 560 x 410 x 250mm
This controller has an advanced light-control function with
an incorporated daylight switch.
SOLAR STREET LAMPS IP65
ly
6m
nd
Eco-F
rie
6m
6m
SOL
Code
SL-30W
Light Source
Luminous flux
Colour Temp
Housing material
Solar Panels
Battery
Controller
Battery Box
Pole
Working time
Max endurance
12V 30W LED Lamp
2700lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
40W*2pcs Mono Crystalline
AGM 12V 65AH
12V 10A - PWM charging mode
Protection against over charge/discharge,
Overload & short circuit
Integrated day/night switching
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
SL-60W
SL-90W
24V 60W LED Lamp
5400lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
80W*2pcs Mono Crystalline
AGM 12V 65AH x 2pcs
12V 10A - PWM charging mode
Protection against over charge/discharge,
Overload & short circuit
Integrated day/night switching
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
24V 90W LED Lamp
8100lm
6500K (Daylight)
Tempered glass and Die-cast Aluminium
120W*2pcs Mono Crystalline
AGM 12V 100AH x 2pcs
24V 10A - PWM charging mode
Protection against over charge/discharge, Overload &
short circuit
Integrated day/night switching
PP Plastic
6M, steel, hot dip galvanised
8hrs per day
3 consecutive rainy days
Components included:
Code
JYSL-8003-AD50
JYSL-8003-AS65
JYSL-8003-DS40
JYSL-8003-FS15
Complete with solar panel, battery and controller.
Many different styles are available with various lighting options and battery configurations.
Please contact our sales team with your requirements for further information.
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
6
Eco-F
nd
ly
SOLAR STREET LAMPS
rie
c/w Built-in
day/night
switching
function
SOL
Code
Height
Light Source
Luminous Flux
Solar Panel
Battery
Post
Working Time
Endurance
SGL-A-3502
SGL-A-3501
SGL-B-4001
SGL-A-3505
4m
4m
4m
4m
12V 9W LED Lamp
12V 9W LED Lamp
12V 9W LED Lamp
2pcs 12V 9W LED Lamp
550±50lm
550±50lm
550±50lm
700±70lm
35W Mono Crystalline
35W Mono Crystalline
35W Mono Crystalline
40W Mono Crystalline
12V40AH AGM Battery
12V40AH AGM Battery
12V40AH AGM Battery
12V40AH AGM Battery
Galvanised steel with plastic Galvanised steel with plastic Galvanised steel with plastic Galvanised steel with plastic
spray treatment
spray treatment
spray treatment
spray treatment
10hrs per day
10hrs per day
10hrs per day
10hrs per day
4 consecutive rainy days
4 consecutive rainy days
4 consecutive rainy days
4 consecutive rainy days
DC APPLIANCES
DC TV
Code
DC Ceiling Fan
JY-60TV
Rated Power
Voltage
Specifications
Packing Size
DC Fan
SLE-F2001HD
2.2m
12V 1.2W LED Lamp
80lm
3.5W Mono Crystalline
3.2V 6Ah Lithium
Glass Fibre reinforced
plastic pole
8hrs per day
5 consecutive rainy days
DC Freezer
SF-D6609
16W
12VDC
9" inch, aluminium, chrome
3 blades, 2 speed
300 x 120 x 290mm
20W
12VDC
Metal construction
3 blades, 1 speed
210 x 210 x 180mm
12VDC/ 230VAC
15" Colour LCD TV
Antenna not included
450 x 380 x 125mm
SDGG307
SLA-0145
45W
12/ 24VDC
45lt capacity, temperature
-10°C to 18°C
570 x 745 x 545mm
DC ENERGY SAVING LAMPS
FE1
L
FE27
L
FE36
L
L
DC Lamps 8000 Hours Life
Code
Code
FE1-7-B22**
FE1-7-E27**
FE1-9-B22**
FE1-9-E27**
FE1-11-B22**
FE1-11-E27**
Watts
Length (mm)
Lumen
9W
140
367lm
7W
124
238lm
9W
136
367lm
11W
146
449lm
*Add “-CW” for cool white or “-WW” for warm white at end of code. eg. FE1-7-E27-CW
15W
139
701lm
FE27-15-E27**
FE27-15-B22**
20W
164
935lm
FE27-20-E27**
FE27-20-B22**
*Add “-CW” for cool white or “-WW” for warm white at end of code. eg. FE27-15-E27-CW
180lm
108
–
5W
FE36-5-B22-WW*
270lm
108
–
7W
FE36-7-B22-WW*
400lm
117
–
9W
FE36-9-B22-WW*
500lm
136
–
11W
FE36-11-B22-WW*
* Supply Voltage: 12VDC, 24VDC, 48VDC
DC Lamps 15 000 Hours Life
CFI-9-E27-12VDC –
12VDC LED Flood Lights
Code
FL1-DC-*-12VDC
FL3-DC-20W-*-12VDC
FL3-DC-30W-*-12VDC
Power
Lumen
10W
100lm/W
20W
100lm/W
30W
100lm/W
* Add colour to code: ● CW (Cool White), ● WW (Warm White)
7
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
Size (mm)
115 x 86 x 86
225 x 185 x 160
225 x 185 x 160
LED BULBS
Non-Dimmable
LED Golf Ball Lamps Frosted
Code
E14
E27
T-LEDG50R-E14-*
T-LEDG50R-E27-*
T-LEDG50R-B22-*
B22
Non-Dimmable
E14
E27
LED Lamps
T-LED-5W-E27-*
T-LED-6W-E27-*
T-LED-5W-B22-*
T-LED-6W-B22-*
Non-Dimmable
B22
LED Lamps
Code E27
E27
Base
E14
E27
B22
E14
E27
B22
5W
6W
5W
6W
245lm
245lm
245lm
245lm
245lm
245lm
E27
E27
B22
B22
Beam
Lumen
450lm
540lm
450lm
540lm
180˚
180˚
180˚
Supply Volts: 85-260VAC
180˚
180˚
180˚
Supply Volts: 85-260VAC
270˚
270˚
270˚
270˚
*Add colour to code: ● PW (Pure White) 5000-5500K, ● WW (Warm White) 3000K.
Non-Dimmable
8W, 10W, 12W
3W
3W
3W
LED Candle Lamps Frosted
T-LEDB35R-E14-* 3W
T-LEDB35R-E27-* 3W
T-LEDB35R-B22-* 3W
B22
E27
LED Power
Supply Volts: 85-260VAC
Code B22
LED Power
HS-E27-8W-* HS-B22-8W-* 8W
HS-E27-10W-* HS-B22-10W-* 10W
HS-E27-12W-* HS-B22-12W-* 12W
B22
Supply Volts: 85-260VAC
Lumen
520-560lm
680-730lm
720-760lm
Beam
160˚
160˚
270˚
For all of the above items *add colour to code: ● CW (Cool White) 4000K, ● WW (Warm White) 3000K.
Non-Dimmable
12VDC
LED High Bright Light Bulb - Only Cool White
LED Power
Code
L2401
L2403
SLL-L2401D
SLL-L2403D
SLL-L2405D
L2405
Lumen
Supply Volts: 8-18VDC
100lm
250lm
450lm
1.2W
3W
5W
Base
E27
E27
E27
INNOVOLT POWER PROTECTOR (MANAGER)
This essential electronics protection appliance continuously monitors AC power using advanced microprocessor-based technologies and remediates against
the ill effects of power disturbances. With LCD screens alerting to issues immediately, the Power Manager provides deluxe protection and monitoring. In
conjunction with the Power Doctor or Power Doctor SmartPhone Adaptor and the Innovolt Management Cloud, you can graphically view and analyze the
number and type of disturbances your Innovolt appliance has protected against.
PM16
Code
Power Managers
PM16
PM30
220 - 240VAC 50Hz
Nominal Operating Voltage
230VAC 50Hz
30A
Max Continuous Current
16A
3500A
Interrupt Rating per UL Standard 1077
3500A
<8ms
Catastrophic Overvoltage Disconnect Time
<8ms
>260VAC ± 4V
Over Voltage Limit
>260VAC ± 4V
<180VAC ± 4V
Under Voltage Limit
<180VAC ± 4V
Overvoltage Clamping Voltage
L-N 800V, L-G 800V, N-G 800V L-N 900V, L-G 800V, N-G 800V
8.9H x 210.1W x 290.1L
Size (mm)
57.2H x 152.4W x 228.6L
Features
• Microprocessor-based protection algorithms
• LCD display shows disturbance history
• Compatible with the Power Doctor and
Power Doctor SmartPhone Adaptor
PDSA100 - Power Doctor
Smart Phone Adaptor
PD2 - Power Doctor
PM30
• Optical communication from all
Innovolt power products
• USB communication to any PC
• LCD shows disturbance history
• Data available for analysis from
any web-enabled device via the
Innovolt Management Cloud
• Industry leading defense against current inrush
resulting from voltage sags & brownouts
• Ultra-fast reaction to dangerous over voltage
• Post-blackout reclose sequence protection
LIT
PD2
Accessories
PDSA100
• Plugs into smartphone and using
the Innovolt App, optically reads
data from LEDs on the Innovolt
power appliances
• Apple iOS compatible
• Data available for analysis from
any web-enabled device via the
Innovolt Management Cloud
• 3-Stage MOV protection against voltage surges
• 4th order, two stage EMI/RFI filtering
• Data & telephone protection circuits
• UL listed
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
8
LED ROAD LIGHTING
Solar Powered Road-Side Warning Lights
Single
Sided
RH-4803-Y
Code
Battery Inc.
LED Qty
Flash Rate
Size (mm)
Colour
Pole Mount
Ø 26mm
RH-4804-Y
1.5V/1200mAh (Ni-Cd)
2 pc (8mm)
65 Flashes/min
326 x 163 x 29
Pole Mount
Ø 50mm
RH-4603-Y
1.5V/1200mAh (Ni-Cd)
1.2V/1800mAh (Ni-Cd)
2 pc (8mm) x 2
6 (10mm)
65 Flashes/min
150 Flashes/min
326 x 163 x 29
Ø115 x 65 x 166
Yellow (other colours on request)
H-931-Y
2V/2.5Ah (Lead-Acid)
8 x 1 (5mm)
120 Flashes/min
Ø386 x 100
Solar Powered LED warning Beacons IP65
Code
XHL-C6009-2-*-†
Battery Inc.
LED Qty
Flash Rate
Size (mm)
Colour
IP68
Code
Double
Sided
XHL-C6009-1-*-†
6V/ 20Ah (lead-Acid)
6V/ 10Ah (Lead-Acid)
60 (5mm)
33 (5mm)
60 Flashes/ min (flowing)
60 Flashes/ min
1600 x 480 x 60
750 x 600 x 60
*Add LED colour to code: ● Y (Yellow), ● R (Red)
†Add arrow direction: L (Left), R (Red)
HAN700-*
Light Intensity
25Candela
Controls
On/Off-Intensity-Pattern
Light Intensity
25 / 50 / 75 / 100%
Light Pattern
Flash or Steady
Range 360°
Flash 7Km / Steady 4Km
Solar Cell
2Wp
Battery
8AH
Battery Life
3 - 5 Yrs
Size (mm)
Ø227 x H212
Approval
EN 61547:2009
* Add colour to code: R (Red), G (Green), B (Blue),
A (Amber), W (White)
XHL-R005
12V/17Ah (Lead-Acid)
29
24 Flashes/min
800H x 600W
Black and Amber
SSL-CL9-*-**
Code
Solar Panel
5.5V/100mA Mono Crystalline Silicone
Battery
3.6V/1400mAh
Visibility
±600m
Effective Light
5 Lumens (2200mcd)
Size
109 x 90mm
*Add colour to code: ● Y (Yellow), ● R (Red), ● BL (Blue),
● W (White)
**Add operating mode to code: C=Constant On, F=Flash,
R=Revolve
Solar Warning Light IP67 - Size: Ø166 x 155H
DWS301-*
Code
XHL-R007
12V/17Ah (Lead-Acid)
44
2 Flashes/min
800H x 600W
Black, Amber and Red
SSL-CL9-ST
For mounting
SSL-CL9-*-** to Traffic
cone or pole
DWS302-*
Steady on
Type
Flashing
4.3km
Night Visibility
4.3 - 6.3km
1.1 watt
Max Power
1.1 watt
5.0-7.5 cd
Effective Light Candela (cd) Red
8.0-12.0 cd
7.5-10.0 cd
Amber
12.0-16.0 cd
3.0-4.0 cd
Blue
5.4-7.2 cd
6.5-7.5 cd
Green
10.4-12.0 cd
7.5-10.0 cd
White
12.0-16.0 cd
5.0Ah NiH2
Battery (Nickel-Hydrogen)
5.0Ah NiH2
120Hrs
Operating Time
300Hrs
*Add colour to code: ● R (Red), ● A (Amber), ● BL (Blue), ● GN (Green), ● W (White)
9
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
ALL
SOLAR BATTERY CHARGERS
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
SLP10F-12
10W
17.0V
0.58A
21.6V
0.68A
302 x 357 x 30mm
SLP20F-12
20W
17.2V
0.87A
21.6V
0.96A
576 x 357 x 30mm
SLP80F-12
80W
17.2V
4.56A
22.84V
5.17A
720 x 150 x 635mm
FOLDABLE / FLEXIBLE SOLAR PANELS
3m extension
cable
Cellphone
accessories
Heavy-duty
material
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
Code
Max Power
Voltage Pmax (Vmp)
Current Pmax (Imp)
Open Voltage (Voc)
Short circuit current
Package size
Foldable
SHB-10W
SHB-20W
SHB-50W
10W
17.42V
0.57A
21.2V
0.62A
220 x 320 x 40mm
20W
17.46V
1.18A
21.6V
1.29A
220 x 320 x 40mm
50W
17.7V
2.87A
21.8V
3.1A
360 x 450 x 60mm
SLP20F-12A
SLP30F-12A
SLP40F-12A
20W
17.4V
1.25A
21.8V
1.41A
350 x 30 x 358mm
FX320
32W
16.5V
1.94A
23.8V
2.4A
1380 x 400mm
Flexible Semi-Rigid
30W
17.4V
1.67A
21.9V
1.78A
375 x 30 x 635mm
Flexible
FX680
68W
16.5V
4.10A
23.1V
5.10A
2849 x 394mm
SOL
40W
17.6V
2.5A
22.6V
2.89A
375 x 30 x 795mm
SLP120F-12
120W
17.2V
6.98A
22.89V
7.72A
1070 x 610 x 140mm
Semi-Rigid
SLP10F-12A
10W
17.0V
0.61A
21.8V
0.69A
350 x 30 x 358mm
SLP50F-12A
50W
17.7V
2.95A
22.8V
3.5A
475 x 40 x 955mm
Features:
• Portable
• Flexible construction
• Ultra Light-weight
• Laminated on Polymer
• Higher Energy yield per Wp
FX1440
144W
33.0V
4.56A
46.2V
5.30A
5486 x 394mm
Applications:
• Boating
• Camping
• Water pumping
• Rural Electrification
Standards:
• IEC 61646
• IEC 61730
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
10
SOLAR PV MODULES
ACDC offers a range of Polycrstalline panels designed for both On‐Grid and Off‐Grid applicatons.
All panels are constructed using the higest quality components and are CE certfied according to the IEC61215:1995 standard.
All ACDC panels are covered by our 25 year warranty.
(Poly) Multicrystalline PV Module (Lower cost)
Code
SLP005-12
SLP010-12
SLP020-12
SLP030-12
SLP040-12
SLP050-12
SLP060-12
SLP080-12
SLP090-12
SLP100-12
SLP120-12
SLP130-12
SLP140-12
SLP135-24
SLP170-24
SLP180-24
SLP210-24
SLP240-24
SLP260-24
SLP270-24
SLP290-24
Maximum
Power (Pmax)
5W
10W
20W
30W
40W
50W
60W
80W
90W
100W
120W
130W
140W
135W
170W
180W
210W
240W
260W
270W
290W
Monocrystalline PV Modules
90W
SLP090S-12
100W
SLP100S-12
180W
SLP180S-24
200W
SLP200S-24
Mechanical Characteristics
Voltage @
Pmax (Vmp)
Current @
Pmax (Imp)
Open-Circuit
Voltage (Voc)
Short-Circuit
Current (Isc)
Dimensions
LxWxH
17.4V
18.8V
34.8V
37.7V
5.17A
5.3A
5.17A
6.85A
21.5V
22.5V
43.8V
45.0V
4.48A
5.83A
5.55A
7.25A
1195 x 541 x 35mm
1195 x 541 x 35mm
1580 x 808 x 40mm
1580 x 808 x 40mm
17.0V
17.0V
17.2V
17.4V
17.4V
17.4V
17.4V
17.4V
18.0V
17.4V
17.4V
18.3V
18.3V
36.2V
34.8V
34.8V
29.0V
30.1V
34.9V
34.9V
36.5V
0.29A
0.58A
1.16A
1.72A
2.30A
2.87A
3.74A
4.58A
5.00A
5.74A
7.75A
7.10A
7.66A
3.73A
4.88A
5.17A
7.24A
8.00A
7.44A
7.73A
7.94A
21.6V
21.6V
21.6V
21.5V
21.5V
21.5V
21.5V
21.5V
21.7V
21.5V
21.5V
22.0V
22.0V
43.8V
43.4V
43.4V
36.3V
37.3V
43.7V
43.7V
44.0V
0.34A
0.68A
1.31A
1.89A
2.53A
3.18A
4.11A
5.03A
5.40A
6.36A
8.52A
7.80A
8.23A
8.06A
5.36A
5.68A
7.65A
8.64A
8.18A
8.50A
8.59A
270 x 222 x 30mm
357 x 302 x 30mm
550 x 359 x 30mm
680 x 426 x 30mm
650 x 665 x 30mm
650 x 665 x 30mm
800 x 675 x 35mm
1005 x 675 x 35mm
1195 x 541 x 35mm
1240 x 675 x 35mm
1490 x 675 x 35mm
1370 x 675 x 35mm
1482 x 676 x 35mm
1020 x 992 x 35mm
1300 x 992 x 50mm
1482 x 992 x 50mm
1636 x 992 x 35mm
1640 x 992 x 50mm
1956 x 992 x 50mm
1956 x 992 x 50mm
1956 x 992 x 50mm
Solar Cells: Multicrystalline or Monocrystalline Solar cells
Construction: Front High-transmission 3.2mm tempered glass; Encapsulate: EVA; Back: TPT
Frame: Clear anodized aluminium alloy (silver colour)
Module Warranty
• 25 year limited warranty of 80% power output;
• 10 year limited warranty of 90% power output;
• 5 year limited warranty of materials and workmanship.
CIS THIN FILM SOLAR PANELS
Dimensions: 1257 x 977 x 35mm
Weight: 20kg
Maximum Load: 2400Pa
Highlights of CIS Technology
• Production output in unfavourable conditions
• Excellent low light performances
• Light soaking effect raises output after installation
• Low shadow tolerance
High temperature stability
• Aesthetically pleasing in black appearance
11
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Code
Nominal Power
Open Circuit Voltage
Short Circuit Current
Current at Nominal Power
Voltage at Nominal Power
SOL
SF150-S
150W
108.0V
2.20A
1.85A
81.5V
SOLAR CHARGE CONTROLLERS
Electronically regulated charging: Boost and float charge, Deap discharge protection PWM regulation. Fully electronically protected: Panel surge, wrong polarity
at the panel or battery, overload and short circuit at load. CML Range: Automatic 12/ 24 Volt detection, boost, equalize and float charging
c/w Built-in Day/
Night Sensor
4 LED indications:
charge status,
SOC, LVD,
Overload/ short
circuit
Code
Max module current
Max load current
Voltage
Display
Self consumption
Dimensions
CA-08
CML-05
8A
5A
8A
CML-08DS
5A
12V
8A
CML-10
CML-20
10A
20A
12/ 24V
20A
10A
8A
12/ 24V
<4mA
<4mA
<4mA
80 x 100 x 32mm
80 x 100 x 32mm
80 x 100 x 32mm
10A / 20A (*Add to Code)
10A/20A
12V/24V
12/ 24V
12/ 24V
2 x LED, 1 x Duo-LED 2 x LED, 1 x Duo-LED 2 x LED, 1 x Duo-LED
SLC-NR24*
CML-20
2 x LED, 1 x Duo-LED 2 x LED, 1 x Duo-LED
LED
<4mA
<4mA
<15mA
80 x 100 x 32mm
80 x 100 x 32mm
168 x 88 x 34mm
ECO PWM CHARGE CONTROLLER
The SLX range of solar controllers are optimally suited for inverter systems. The charging can be individually set up by using four buttons behind the front
casing. Multi-stage charging technology + PWM control. Integrated self test function.
LCD indications:
Battery voltage
PV Wattage
Charge current
Code
Max module current
Max load current
Voltage
Max Voc
Display
Self consumption
Dimensions
SLX-10
SLX-20
SLX-30
SLX-40
10A
20A
30A
40A
10A
20A
30A
SLX-4*
*10A/ 40A (Add to code)
10A
10A/ 40A
12/ 24V
12/ 24V
12/ 24V
12/ 24V
< 47VDC
< 47VDC
48V
< 47VDC
< 47VDC
LCD
LCD
LCD
< 47VDC
LCD
12.5mA
187 x 95 x 44mm
12.5mA
187 x 95 x 44mm
12.5mA
187 x 95 x 44mm
12.5mA
187 x 128 x 49mm
LCD
25mA
187 x 128 x 49mm
SOLAR CHARGE CONTROLLER
The SunStar is a highly reliable solar battery charger and its most critical feature is to maximize the harvest energy from the PV array into the battery by using
either advanced Maximum Power Point Tracking (MPPT) technology or Pulse Width Modulation (PWM) control.
LCD indications:
Battery voltage
PV Wattage
Charge current
Code
Max module current
Max load current
SS-30C
SS-45C
SS-50C
SS-60C
SS-80C
30A
45A
50A
60A
80A
30A
45A
Voltage
12/ 24/ 48V
12/ 24/ 48V
Display
LED
LCD
Control Method
Max Voc
Dimensions
PWM
140VDC
65 x 236 x 35mm
PWM
140VDC
266 x 127 x 75mm
50A
12/ 24/ 36/ 48V
MPPT
LCD
240VDC
415 x 225 x 147mm
SOL
60A
12/ 24/ 48V
PWM
LCD
140VDC
266 x 127 x 75mm
80A
12/ 24/ 36/ 48V
MPPT
LCD
240VDC
498 x 393 x 147mm
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
12
BATTERIES
BATTERY TESTER
Features:
ACDC Batteries use special alloyed calcium-lead which leads to extermely low
levels of "Electrolyte decrease". Therefore there is no need to top up with distilled
water if the charging system remains error free.
• Simultaneously test voltage, resistance
and battery capacity
• Auto-calibration function to enhance
testing accuracy
• Fast testing of battery or string, results
are automatically saved
• USB connection for software updating
and data transfer to PC
• Powerful PC management software for
data storage and analysis
• Audible alarm and over voltage protection
• Easy navigation via the colour touch screen and keyboard
• Complete protection against reduction of sulfuric acid
• Consistent starting performance
M Solar Cells
Sealed Lead Acid
Life span 3 to
5 years in
standby service
Code
PITE3915
Description
Portable battery tester for batteries
Suitable for cell voltages: 1.2V, 2V, 6V and 12V
Suitable for 5Ah - 6000Ah batteries
Deep cycle Calcium Lead Acid
Code
Type
SY612
SY632
SY640
SY640-S
SY1245
SY1270
SY12012
SY12024
SY12035
SY12045
SY12065
SY12080
SY120102
SY120200
Lead Acid
Nominal Nominal
Voltage Capacity
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Lead Acid
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
Calcium Lead
6V
6V
6V
6V
12V
12V
12V
12V
12V
12V
12V
12V
12V
12V
1.2AH
3.2AH
4.0AH
4.0AH
4.5AH
7.0AH
12.0AH
24.0AH
35.0AH
45.0AH
65.0AH
80.0AH
102.0AH
200.00AH
Terminal
type
Lug
Lug
Lug
Lug
Lug
Lug
Lug
Lug
SAE Post
SAE Post
SAE Post
SAE Post
Nut
SAE Post
Tests cell resistance and voltage to help eliminate weak
Size (mm)
batteries and ensure optimal performance of the system
96 x 72 x 84
125 x 33 x 72
70 x 47 x 107
65 x 33 x 75
90 x 70 x 107
150 x 65 x 102
151 x 98 x 102
165 126 x 173
230 x 200 x 135
230 x 240 x 135
230 x 265 x 190
226 x 352 x 175
240 x 335 x 175
245 x 520 x 280
3000 cell test results stored in memory
Technical Specifications
Resistance range
0.00mΩ ~ 100mΩ
Resistance
0.1mΩ/ ±1.0% of rdg
Voltage
1mV/ ±0.2% of rdg
Battery
Li-ion
Testing Capacity
1-254 cells per string
Voltage range
0-220V
Test resolution/ accuracy:
More than 8 hours
Battery Life
Display
320 x 240 Pixel TFT
Size
210 x 110 x 60mm
SOLAR AC HOME SYSTEM
YES
Complete single phase solar power solution for use in a home. The kit includes all the components needed to make the switch over to solar quick and easy.
The integrated display allows the user to have all the information about the status of the system at their fingertips.
Price includes:
Batteries & PV
panels incl.
Inverter
Solar regulators
Mains isolator
DC Disconnector
LCD Display
Code
Description
DE-H150
DE-H250
DE-H350
HYB001-6
500W Power Pack
1000W Power Pack
3000W Power Pack
6000W Power Pack
8000W Power Pack
10000W Power Pack
6000W
8000W
10000W
YES
HYB001-8
DE-H10K
SAP-20007AW-PACK
Max power rating
500W
Max current
2.5A
4.5A
32A
42A
80AH
4 x 100AH
8 x 100AH
25A
Battery
20 x 100AH
24 x 100AH
36 x 100AH
Solar Panels
80W
2 x 220W
4 x 220W
12 x 270W
14 x 270W
20 x 220W
12VDC
12VDC
12VDC
48VDC
48VDC
48VDC
6hrs
7hrs
8hrs
10hrs
10hrs
10hrs
Output voltage
Input voltage
Standby Time
13
* Solution excludes PV mounting
system and wiring.
1000W
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
3000W
12.5A
220-240± 1%
BC1
MOBILE POWER BACKUP SYSTEMS
Mobile UPS - Modified sine wave output 230VAC single phase, to be used for home or office during power cuts. All in one inverter/ charger/ auto change over/
battery pack and trolley
Solar System
Input voltage
12VDC/ 230VAC
Overload
protection
Over/ under
voltage protection
Code
EPS-1000B
Peak watts
2000W
EPS-1500B
EPS-2000D
PP-1500
PP-2000
2000W
2000W
1500W
2000W
12VDC
12VDC
13.5 - 20VDC
12VDC
12VDC
6000W
12VDC
1.2hrs
0.8hrs
2.4hrs
1.6hrs
1.2hrs
1.2hrs
2.4hrs
1.8hrs
1.2hrs
(4 batteries)
(8 batteries)
(16 batteries)
BAT-A4
BAT-A8
BAT-A16
420 x 450 x 670
760 x 450 x 770
780 x 455 x 1360
Constant watts
1000W
1500W
Voltage
12VDC
Back-up time +102Ah
3000W
1.2hrs
Back-up time full load
Back-up time +4x102Ah
Accessories
Battery Boxes
Box Size
EPS-2000B
4000W
0.8hrs
6hrs
0.6hrs
4hrs
3000W
4000W
3hrs
4.8hrs
3hrs
3.6hrs
Features:
• Low voltage LED
• Overload LED
• Output Volt 230VAC/ +/ -8%
• DC to AC isolation
• Short circuit protection
Applications:
Radio's, TV, Cellphones
Energy saving lamps
Power tools
* Calculations for
power
Power tool W x 3 =
100W x 3 = 300W
PM-A-150-SA
Maximum power
Peak power
Input volts
Dimensions
PM-A-300-SA
150W
250W
10-40VDC
150 x 190 x 170mm
2.4hrs
Specifications: • Modified sine wave 210-230VAC
• Robust industrial wheels
• EPS-2000D 180W PV Panel, 20A Controller
DC TO AC INVERTERS
Code
3000W
4000W
1.6hrs
0.6hrs
PP-3000
PM-A-600-SA
300W
600W
500W
1000W
10-14VDC
10-14VDC
420 x 215 x 140mm
PM-A-1000-SA
1000W
1500W
10-14VDC
340 x 335 x 250mm
Do Not Use for Iron Core
Ballast
MODIFIED SINE WAVE INVERTERS
Modified
Sine
Code 12V
Code
Code
24V
12V
Code PM-R15A
*Remote control Kit
PM-A-0150AH12 PM-A-0300AH12 PM-A-0600AH12 PM-A-1000AH12 PM-A-1200AH12 PM-A-1500AH12
-
-
Max continu150W
300W
ous power
Peak power
300W
600W
Output Amps
0.6A
1.25A
Dimensions 115 x 101 x 63mm 189 x 101 x 63mm
Code 12V with charger
Code 24V with charger
Specifications: • AC Output voltage
• Regulations
• Frequency
• Low voltage shut down 12/ 24
PM-A-0600AH24 PM-A-1000AH-24 PM-A-1200AH2
600W
1000W
1200W
2.5A
245 x 176 x 85mm
2000W
4.16A
360 x 236 x 83mm
230VAC
± 0.5%
50Hz ±1%
9.8V/ 19.12V
PM-A-1000CA12
PM-A-1000CA24
1200W
PM-A-2500AH12
PM-A-1500AH2
PM-A-2500AH24
1500W
2500W
1400W
2000W
5A
7A
330 x 275 x 110mm 480 x 275 x 110mm
PM-A-1200CA12
PM-A-1500CA12
PM-A-1200CA12
PM-A-1500CA24
4200W
10.4A
510 x 275 x 110mm
PM-A-2500CA12
PM-A-2500CA24
Features: • Overload protection
• DC Input/ AC Output short circuit protection
• All inverters supplied with cables
• Cooling Fan
BC1
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
14
PURE SINE WAVE INVERTERS
Pure Sine
BC1
Code 12V
CZ-150S-12 CZ-300S-12 CZ-600S-12* CZ-1000S-12* CZ-2000S-12* CZ-3000S-12* CZ-4000S-12* CZ-5000S-12* CZ-6000S-12*
Code 24V
-
-
Code 48V
-
-
-
Max continuous power
150W
300W
600W
1000W
2000W
3000W
4000W
5000W
6000W
Output Amps
300W
600W
0.6A
1200W
2000W
4000W
6000W
8000W
10000W
12000W
Peak power
Dimensions
CZ-600S-24* CZ-1000S-24* CZ-2000S-24* CZ-3000S-24* CZ-4000S-24 CZ-5000S-24* CZ-6000S-24*
1.5A
CZ-1000S-48* CZ-2000S-48* CZ-3000S-48* CZ-4000S-48* CZ-5000S-48* CZ-6000S-48*
2.8A
4.3A
8.7A
13A
17A
21A
26A
180x105x60mm 260x165x85mm 260x165x85mm 328x165x85mm 416x165x85mm 497x170x150mm 485x210x127mm 565x210x145mm 565x210x145mm
* Add (C) for Charger Unit
• High Quality Components are used to improve effeciency.
• Automated manufacturing processes ensure product quality.
• Advanced PCB design results in reduced electro magnetic interference and improved performance.
British Plug for Inverters
Code
A304
HOME SOLAR INVERTERS
This home solar inverter system incorporates features such as overload protection, short circuit protection and a DC cold start function.
The inverter is designed for 24 hour operation.
Code
Max.con power
HU-103
HU-203
HU-303
HU-503
HU-603
1.2kVA/ 800W
2.4kVA/ 1600W
3.6kVA/ 2400W
5kVA/ 4000W
6kVA/ 6000W
8kVA/ 8000W
Input DC range
12VDC
48VDC
48VDC
Input voltage range
120-270VAC
24VDC
Output voltage
Output current
NB: Requires external
solar controller
24VDC
48V
220/ 230/ 240VAC re-settable via LCD Display
3.5A
7A
10A
17A
26A
35A
>60A
>60A
>60A
415 x 600 x 260
415 x 600 x 260
415 x 600 x 260
>40A
>50A
>50A
Dimensions
298 x 400 x 150
298 x 450 x 190
298 x 450 x 190
Specifications:
• Pre-settable parameters
• Multi stage charger
Battery charger
HU-803
• High effeciency design
• Removable LCD Display
• Self-diagnostic function
• Input/ output protection
DC TO AC INVERTER/ CHARGER/ POWER MANAGEMENT SYSTEM
• Combi-functional, with intelligent shore and generator
power management
• Uninterrupted AC power (UPS function)
• Virtually unlimited power thanks to parallel operation
• Three-phase capability
• Power Control: Dealing with limited generator, shore side or grid
power to avoid sudden loads on generator causing voltage spikes
• Power Support: Boosting the capacity of shore or
generator power, an innovative feature of the CombiPlus
CombiPlus - Pure Sine Wave Inverter/ Charger/ Power Management
Code
CP-1500-122
CP-3000-122
DC Voltage
(IN)
AC Voltage
(IN/OUT)
12VDC
185-240VAC
12VDC
185-240VAC
Rated
Power
Max
Power
3000W
6000W
1500W
3000W
• Four-stage adaptive charger and dual battery charging
• LCD display for parameter setting and error messages
• Programmable auxillary relay (x3)
• Programmable input current limit for power share
• Communication with max. 10sets of solar chargers
(SunStar series)
• Four preset control mode applications with AC grid, AC charging
and solar charging
• Optional remote panel with LCD display for easy operation at a
distance
System - Ideal for home, office, caravan etc.
Size (mm)
362 x 258 x 370
424 x 258 x 370
Battery
Voltage
12VDC
12VDC
Charging
Current
70A
140A
Battery
Bank Size
200-700Ah
400-1200Ah
The "CombiPlus" is a powerful true sine wave inverter, a sophisticated battery charger that features adaptive (4-stage) charge technology and a high-speed AC Auto
Transfer Switch (ATS) in a single compact enclosure. The "CombiPlus" can also support the Mains Power with battery power when the load increases or the Mains
fails. If the load falls, the excess Mains Power is diverted to charge the battery. The unit can also control up to 10 SS-45C solar charge controllers to enable solar
battery charging. (see page 7)
15
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
AC HOME HYBRID SYSTEM
The Solar hybrid system is a PLC controlled solar/ wind modular solution for home and office. Our new modular system can be increased from 3kVA to 15kVA.
The base unit consists of a steel 21U 19inch cabinet, touch screen monitor, 100A solar controller and an off grid inverter (3kVA).
Pure Sine
IP20
Linear Load
Efficiency
83 to 87%
Touch Screen Monitor
100A Solar Controller
Batteries, PV Panels and PV mounting system to be ordered seperately
*3kVA is a base unit and can be increased with selected modules to 15kVA
Code
Base Unit
*SWKH001-3KVA
SPO1000-B
SPO3000-B
Stackable Grid Inverter
Add on inverter modules
Complete System
SPO6000-B
SPO9000-B
SPO12000-B
Max power
2100W
220/ 230/ 240 +/-1%
700W
2100W
4200W
220/ 230/ 240 +/-1%
6300W
8400W
Max current
13.6A
4.5A
37,3
40,9
54,5
DC Voltage
13,6
48 (40-57VDC)
32
41
49
435 x 380 x 445
435 x 380 x 445
Output voltage
Weight Kgs
88kgs
5
Dimension
21U x 600D
440 x 286 x 1U
Accessories
Code
SPC048200
SWKH-41U
48 (40-57VDC)
13,5
435 x 358 x 2U
435 x 380 x 445
Description
Solar Charge controller MPPT, 200A, 48VDC, Max PV input 9.6kW (58-70V)
41U battery cabinet + DC Bus bar, Fans and extraction, lockable doors
HOME SOLAR INVERTERS
The Solar Powabank is the latest innovation in power products: Simplified structure, reliable performance, easy operation. This Solar Power System can offer
stable and reliable electricity to those regions where are short of power or even without power.
Code
Description
Max power rating
Waveform
Max current
Controller Amps
Battery
Solar Panels*
Output voltage
Input voltage
Dimensions
Features
SPB-AW-55/300
SPB-AW-100/600
SPB-AW-200/600
300W AC Power Pack
300W
Modified Sinewave
N/A
10A
55Ah
50W
600W AC Power Pack
600W
Pure Sinewave
8A
30A
100Ah
100W
300 x 180 x 550mm
460 x 240 x 550mm
SPB-AW-200/600-PACK
SAP-20007AW-PACK
1000W AC Power Pack
1000W
Pure Sinewave
8A
30A
200Ah
2 x 100W
220V ± 10%
25V Max
560 x 290 x 480mm
• Reliable, maintenance free performance
• Simple design, to meet your requirements
• LCD Display clearly shows system status at all times
• Various applications ranging from everyday to
emergency power supply
* For mounting brackets for the solar panels see page 29-31
SOL
1000W AC Power Pack Only
1000W
Pure Sinewave
8A
30A
200Ah
-
560 x 290 x 480mm
• Power generation and storage for uninterrupted
use in places without electricity
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
16
GRID TIE HOME SOLAR SETS
Solar Frontier home based grid tie solar systems are designed with precisely
matching components for maximum output and efficiency using the latest CIS
thin film technology solar panels and highly efficient Solar Frontier inverters.
Grid tie solar systems are designed with the aim of working in conjunction with
your utility supply to offset your usage from the utility by making use of solar
power before utility power and feeding excess power back into your local grid.
Code
Capacity
SOLARSET 3.0
3.0kWp
No. of
Inverters
No. of
Modules
18
1 x 3kW
DC Cable
Connectors
50m
Modules in
Series
5 male
6
5 female
28
2 x 3kW
10 male
4.6kWp
50m
7
SOLARSET 4.6
10 female
36
2 x 3kW
10 male
5.9kWp
50m
6
SOLARSET 5.9
10 female
• Estimated daily power generated is calculated at STC and may vary depending on weather conditions.
• Mounting brackets not included.
• Compatible electricity meter required. South African prepaid meters are not compatible
Dialy Power
Generated (±)
Roof
Required
21.5kWh
36.4m2
25.7kWh
46.8m2
14kWh
23.4m2
INVERTER SPECIFICATIONS
DC Input sive (PV panel side)
Code
Maximum input volatge
Minimum input voltage
MPP Range
Maximum input current
Maximum input power
900V
350V
350V - 700V
10A
3060W
Rated output voltage
Maximum Output current
Rated output
Rated frequency
Own Consumption
Feeding Phases
Power Factor (cos = 1)
Maximum Efficiency
230V
16A
3000W
50Hz & 60Hz
<8W
single phase
0.95 capacitive … 0.95 inductive
98,60%T
Protection Class
Degree of protetion
Isolation Principle
Grid Monitoring
Insulation Monitoring
Residual current monitoring
Overvoltage protection
Reverse Pololarity protection
II
IP21 (Casing IP51; Display IP21)
No galvanic isolation; transformerless
Yes. Intergrated
Yes, intergrated
Yes, intergrated
Varistors
Yes
AC Output side (Mains grid Connection)
Safety
Monitoring - If the system owner agrees to allow his system data to be published on
www.solare-energiewende.de, he will be able to use the Solar Frontier Monitoring Portal free
of charge for two years. At the end of that time, he will receive an offer to continue using the
portal as a paid service.
Clear Display of Yield Values - The software interface is organized for maximum
clarity. Besides the system data, the energy yields are shown in a daily, weekly, monthly or
yearly profile. Current yield values for the system are evaluated on a scale and compared
with values from other systems in the same region. So users can see at a glance whether
their yields are higher or lower than the average for the region. They can also see their
environmental contribution very easily in a display that shows how much CO2 has already
been reduced because of these yields.
17
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
Features
FS-WR-3000
Inverter
• Highest efficiency
• Simple installation
• Intergrated data logger
• Firmware update possible
• Low housing temperature at full load
• Functionally perfect, environmentally friendly
plastic housing
• Lowest possible own consumption
• Intergrated DC circuit breaker
• Protective insulation according to protection class II
• Very long service life
• Service menu for parameter adjustment
• Multifunction graphical LCD display with backlighting
• Animated representation of yield operation
• Simple menu-driven operation
• System monitoring with Solar-logTM and web'log
SOLAR EDGE INVERTERS
This range of solar inverters is part of SolarEdge's innovative system designed to provide superior performance at a competitive price. The solar edge PV inverter
combines a sophisticated, cutting edge digital control technology and a one stage, ultra-effecient power conversion architecture to achieve superior performance - over
97% efficieny with best in class reliability. Our fixed-voltage technology ensures the inverter is always working at its optimal input voltage, regardless of the number of
modules or environmental conditions.
The best choice for SolarEdge enabled systems
• Superior effeciency (98%)
• Small, lightest in its class and easy to install
• Built-in module-level monitoring
• Communication to internet via ethernet or wireless
• IP65 - Outdoor and indoor installation
Free 12 year warranty for inverters
Code
Rated AC Power Output
SE2200
SE3000
2200
3000
Single Phase Inverters
SE3500
SE4000
3500
220/230
50/60+/-5%
AC Frequency
12
16.5
19.5
22
Residual Current/ Step Detector
Utility monitoring, islanding protection,
Country confiqurable thresholds
2400
3300
3900
SE6000
6000
SE4000-16A
4000
RATING
W
Vac
Vac
Hz
27
27
16
A
300/30
mA
Yes
-
4400
Transformer-less, ungrounded
5500
6600
4400
W
-
Yes
500
350
Max Input Voltage
Nominal DC Input Voltage
Max Input Current PV
5000
184-264.5
AC Output Voltage Range
Recommended Max DC Power
(module STC)
SE5000
4000
AC Output Voltage (Nominal)
Max Current Output
Three Phase
Single Phase
Must be used with Solar Edge Power Optimizers (PG13)
8.5
11.5
13.5
Vdc
Vdc
15.5
19.5
23
15.5
A
-
RS485, RS232, ETHERNET, Zigbee (Optional)
Support Communication Interface
Three Phase Inverters
Code
SE7K
SE8K
SE9K
SE10K
SE12.5K
SE15K
SE16K
SE17K
RATING
Rated AC Power Output (Max)
7000
8000
9000
10000
12500
15000
16000
17000
W
14,5
380/ 220: 400/ 230
184-264.5
16
20
AC Output Voltage (Nominal)
AC Output Voltage Range
Max Current Output
11.5
13
Grids supported - three phase
7700
8800
9900
Yes
-
11000
13700
950
Nominal DC input voltage
750
16500
17600
18700
13,5
15
16,5
Description
Extended warranty, single phase inverter 4 - 6kW
Extended Warranty, single phase inverter <4kW
Extended warranty, three phase inverter 15 - 17kW
Extended warranty, three phase inverter 7 - 12.5kW
SOL
W
-
VDC
21
22
23
23
RS485, RS232, ETHERNET, ZIGBEE or GSM (Optional see page14)
Support communication interface
WE-1M-25
WE-1S-25
WE-3H-25
WE-3M-25
-
Yes
12
A
mA
Max input voltage
Code*
26
300/ 30
Transformer-less, ungrounded
Max input current PV
25.5
3/ N/ PE: 230/ 400
Residual current/ step detector
Utility monitoring, islanding protection,
country configurable threshold
Recommended max DC power
(module STC)
23
VAC
VAC
Safety Standard compliance
IEC-62103 (EN50178), IEC-62109
Grid connection standards:
VDC
A
-
Emissions
IEC61000-6-2, IEC61000-6-3
VDE 0126-1-1, VDE-AR-N-4105, AS-4777, RD-1663, IEC61000-3-11,
IEC61000-3-12, FCC part 15 class B, RoHS Yes
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
18
POWER OPTIMIZER
A superior approach to maximizing the throughput of photovoltaic systems
• Up to 25% more energy - module-level MPPT eliminates power loss due to module mismatch
• Superior effeciency- peak (99.5%), weighted (98.9%)
• Next gereration maintenance with module-level monitoring and smart alerts
• Automatic DC safety
• Maximum roof utilization
• Independant optimization technology (IndOPTM)
The most cost effective solution for residential, commercial and large field installations
Only for use with Solar Edge Inverters
Code
OPA250-RV
OPA300-LV
OPA400-MV
OPA400-EV
RATING
47
55
130
VDC
5-47
75
5-55
15-130
VDC
10
5-75
10
7
A
250
Rated Input DC Power
Absolute max input voltage
MPPT Operating range
Max input current
300
400
400
12.5
Max Output current
W
A
15
5-60
Operating Output Voltage
VDC
500/ 950
Total max string voltage 1ph/ 3ph
VDC
8 (1Ph system)/ 16 (3Ph system)
Min number Optimizers
Max number Optimizers
-
Module power dependant: Maximum 25 (1Ph system)/ 50 (3Ph system)
BRANCH-CABLE FOR POWER OPTIMIZER INPUT
Ideal solution for low power modules
• Allows to connect 2-4 modules in parallel to a single power optimizer
• Double insulated PV wire
• Max current 30A @ 1000VDC
SE-CBY-4MM
Code
Description
Kit consists of
• Utilize power optimizers to their full power rating
• Multi-contact MC4 connectors
SE-CBY-3MM
SE-CBY-2MM
SE-CBY-2MM
SE-CBY-3MM
2- Module branch cable
SE-CBY-4MM
3- Module branch cable
20 male & 20 female units in each pack 10 male & 10 female units in each pack
4- Module branch cable
10 male & 10 female units in each pack
SAFETY & MONITORING INTERFACE
Benefit from module-level monitoring and automatic safety with non-SolarEdge inverters.
•
•
•
•
•
Interface between SolarEdge power optimizers and non-SolarEdge inverters
Module safety voltage for installer and firefighter safety
Mobile and web-based module level performance monitoring
Communication via RS232, RS485 or Ethernet
IP65 for outdoor installation
The SolarEdge safety and monitoring interface collects module performance data measured by each
power optimizer, as well as inverter data*, and interfaces with the SolarEdge server to allow module-level
and system-wide monitoring. (For communication options please see page 14)
Code
DC Input
Max input voltage
Total max current
Input type
AC Input
Supported voltage
AC Frequency
Max input current
19
SMI-35-3C-01
Additional Features
Display
LCD & LED
1000VDC
35A
3 x MC4 Compatible
Remote monitoring
Module Safety DC Voltage
Yes
On-site Master shutdown
Lighting Protection
85 - 264VAC
Read inverter data
47 - 62Hz
DC Current Sense
300mA
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
Yes
Yes
Yes
Yes
Yes
CONTROL AND COMMUNICATION GATEWAY
Application Examples:
Highlights:
• Analogue inputs accomodate a variety of environmental
sensors, including temperature, irradiance and wind
• Logs inverter monitoring data
• Power reduction interface - ripple control
• Extends the distance of wired connections
• Wireless connectivity - GSM or Zigbee wireless
connection options (see below)
• Interfaces to non-SolarEdge monitoring loggers
• Revenue meter connection
Code
Power supply
Supply voltage
Ethernet interface
Wireless connection
Power Reduction INT.
RS232 interface
SE1000-CCG-G
3
Number of analogue inputs
0-2V or 0-10V
Input 1
Input 2
0-20mV or 0-2V
Input 3
-20mA - 20mA
Supported RS485 Devices: SolarEdge devices, export inverter data, Revenue meter,
Exported Data to Non-SolarEdge Logger
Included, 100-240VAC
9 - 140VDC (2W)
10 / 100 - BaseT
ZigBee Module (see below)
4 control pins, 5V, GND
For local connection
GSM MODEM
SolarEdge offers a GSM/ GPRS modem for wireless connectivity. The modem enables a wireless link between a master inverter and the SolarEdge monitoring
server using GSM cellular communication. GSM connectivity allows to effortlessly connect remote installations to the monitoring portal.
Effortless Monitoring
• Connects wirelessly to the monitoring portal
• Uses any available GSM network
• External antenna for strong reception
• Easy installation, connects to serial port of master inverter or communication gateway
• European compliance
Code
SE1000-GSEG-20E
Rating
RF Data rate
14,4
kbps
Frequency bands
Transmit power
Data volume
Antenna
Power supply
850/ 900/ 1800/ 1900
Mhz
30 (@ 1800/ 1900Mhz)/ 33 (@850/ 900Mhz)
W
0.13 (Per power optimizer)/ 0.25 (per inverter)
MB/ Month
-
5.5 - 32
VDC
external, 0dbi, SMA/M connector
WIRELESS COMMUNICATION PRODUCTS
SolarEdge offers Zigbee products for wireless connectivity. These enable either a wireless mesh network between multiple inverters at a site, or wireless link
between a single inverter and a remote internet gateway point.
Interconnect with ease
• Replaces either RS485 or Ethernet wiring
• External antennas for long or non-line-of-sight-links
• Interconnects inverters wirelessly
• Connects wirelessly between an inverter
and a remote internet gateway
• Zigbee unit installed within the inverter enclosure
for outdoor resilience
Code
SE1000-ZB02-MST
SE1000-ZB02-SLV
SE1000-ZB00-DG2-X
Description
1 Digi X-bee-Pro coordinator module, antenna (Slave inverter)
Description
Indoor/ Urban rating
Outdoor/ RF Line of Sight
Frequency Band
Antenna
Port (SE1000-2B00-DG2-X)
Power Supply
Inter-inverter communication
1 Digi Connect Port x2 gateway, 1 Digi X-bee-Pro router module, antenna
Performance
RF Data Rate
Functions
1 Digi X-bee-Pro coordinator module, antenna (Master inverter)
Inter-inverter communication
Ethernet Gateway
Rating
250
kbps
15
m
250
m
2.4
2.11" helical whip, RP-SMA connector
Ghz
-
9-30
VDC
RJ45, 10/ 100Ethernet
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
20
SINGLE PHASE GRID TIE INVERTERS
The Fronius IG Plus generation of inverters represents an evolution of the proven Fronius IG product family. Power categories from 2.6 to 12kW promise suitability
for every possible system size. With a maximum effeciency of 95.9%, the Fronius IG Plus range achieves one of the highest values for transformer inverters.
Fronius inverters always achieve maximum yield, even when in the partial-load range.
This is all down to the unique Fronius Master Inverter X-Change system (MIXTM).
The "master" is allocated alternately, taking into account the operating hours worked.
Fronius transformer inverters use a high-frequency (HF) transformer. The automatic
transformer switchover facility produces three efficiency peaks. The result: a constant
level of efficiency across the entire input voltage range, resulting in higher yields.
kfd
With the Fronius Datamanager, we offer a WLAN interface in the
inverter itself. The inverter is connected to the internet without
additional cabling and grants you the perfect overview of how the PV
system is operating. (Optional)
kfd
Fronius inverters are ready for the Smart Grid of tommorrow.
A series of smart functions, known as Advanced Grid Features,
are built into the devices.
kfd
Code
Input Data
DC maximum power at cos Ø=1
Max. input current (Idc max)
Max array short circuit current
Min. input voltage (Udc min)
FIGP25V-1
FIGP30V-1
FIGP35V-1
FIGP50V-1
FIGP55V-1
FIGP60V-1
2740W
11.9A
17.9A
3170W
13.8A
20.7A
3710W
16.2A
24.3A
4260W
18.6A
27.9A
5260W
22.9A
34.4A
6320W
27.5A
41.3A
25V-1
30V-1
35V-1
50V-1
55V-1
60V-1
2600W
2600VA
11.3A
3000W
3000VA
13.0A
3500W
3500VA
15.2A
4000W
4000VA
17.4A
1-NPE 230V
180V
270V
50Hz/ 60Hz
46 - 65Hz
<3%
0.75 - 1ind / cap
5000W
5000VA
21.7A
6000W
6000VA
26.1A
25V-1
30V-1
35V-1
55V-1
60V-1
25V-1
30V-1
35V-1
Feed-in start voltage (Udc start)
Nominal input voltage (Udc max)
Max input voltage (Udc,1)
MPP voltage range (Umpp min - Umpp max)
Number of DC inputs
Output Data
AC nominal output (Pac, r)
Max. output power
Max. output current (Iac max)
Grid connection (Uac, r)
Min. output voltage (Uac min)
Max. output voltage (Uac max)
Frequency (fr)
Frequency range (fmin - fmax)
Distortion factor
Power factor (cos Øac, r)
General Data
Dimensions (height x width x depth)
Weight
Degree of protection
Protection class
Overvoltage category (DC/ AC)
Night time consumption
Inverter type
Cooling
Installation
Ambient temperature range
Permitted humidity
DC connection technology
AC connection technology
21
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
673 x 434 x 250mm
23.8kg
230V
260V
370V
600V
230 - 500V
6
50V-1
50V-1
IP54
1
2/3
ca. 1W
High Frequency Trasnformer
Regulated air cooling
Indoor & outdoor installation
from 20°C to +55°C
0% to 95%
Screw terminal connection 1.5mm2 - 16mm2
Screw terminal connection 2.5mm2 - 35mm2
SOL
55V-1
60V-1
968 x 434 x 250mm
36.9kg
THREE PHASE GRID TIE INVERTERS
The Fronius IG Plus generation of inverters represents an evolution of the proven Fronius IG product family. Power categories from 2.6 to 12kW promise suitability
for every possible system size. With a maximum effeciency of 95.9%, the Fronius IG Plus range achieves one of the highest values for transformer inverters.
Fronius inverters always achieve maximum yield, even when in the partial-load range.
This is all down to the unique Fronius Master Inverter X-Change system (MIXTM).
The "master" is allocated alternately, taking into account the operating hours worked.
Fronius transformer inverters use a high-frequency (HF) transformer. The automatic
transformer switchover facility produces three efficiency peaks. The result: a constant
level of efficiency across the entire input voltage range, resulting in higher yields.
kfd
With the Fronius Datamanager, we offer a WLAN interface in the
inverter itself. The inverter is connected to the internet without
additional cabling and grants you the perfect overview of how the PV
system is operating. (Optional)
kfd
Fronius inverters are ready for the Smart Grid of tommorrow.
A series of smart functions, known as Advanced Grid Features,
are built into the devices.
Code
Input Data
DC maximum power at cos Ø=1
Max. input current (Idc max)
Max array short circuit current
Min. input voltage (Udc min)
kfd
FIGP55V-3
FIGP60V-3
FIGP80V-3
FIGP100V-3
FIGP120V-3
FIGP150V-3
5250W
22.8A
34.2A
6300W
27.5A
41.3A
7360W
32.0A
48.0A
8430W
36.7A
55.1A
10590W
46.2A
69.3A
12770W
55.6A
83.4A
55V-3
60V-3
80V-3
100V-3
120V-3
150V-3
55V-3
60V-3
80V-3
Feed-in start voltage (Udc start)
Nominal input voltage (Udc max)
Max input voltage (Udc,1)
MPP voltage range (Umpp min - Umpp max)
Number of DC inputs
Output Data
AC nominal output (Pac, r)
Max. output power
Max. output current (Iac max)
Grid connection (Uac, r)
5000W
5000VA
7.3A
6000W
6000VA
8.7A
7000W
7000VA
10.2A
55V-3
60V-3
80V-3
Max. output voltage (Uac max)
Frequency (fr)
Frequency range (fmin - fmax)
Distortion factor
Power factor (cosØac, r)
Dimensions (height x width x depth)
Weight
Degree of protection
Protection class
Overvoltage category (DC/ AC)
Night time consumption
Inverter type
Cooling
Installation
Ambient temperature range
Permitted humidity
DC connection technology
AC connection technology
150V-3
10000W
10000VA
14.5A
12000W
12000VA
17.4A
100V-3
120V-3
150V-3
1.263 x 434 x 250mm
49.2kg
IP54
1
2/ 3
ca. 1W
High Frequency Transformer
Regulated air cooling
Indoor & outdoor installation
from 20°C to +55°C
0% to 95%
Screw terminal connection 1.5mm2 - 16mm2
Screw terminal connection 2.5mm2 - 35mm2
SOL
120V-3
8000W
8000VA
11.6A
3-NPE 400V/ 230V
180V
270V
50Hz/ 60Hz
46 - 65Hz
<3%
0.75 - 1ind./ cap
Min. output voltage (Uac min)
General Data
230V
260V
370V
600V
230 - 500V
6
100V-3
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
22
Datalogger Web
Code
Supply
CodeVoltage
Power usage
Interfaces
FRONIUS ACCESSORIES
Com Card
Power Control Box
FRONIUS-DM
FRONIUS-CC
FRONIUS-PCBOX
60mA
1.3W
RS422 (RJ45) x2 (In/Out)
2,3 & 4-Stage ripple-control
signal receivers
197 x 110 x 57mm
FRONIUS-DW
12VDC
RS422 / Ethernet / USB
Relay: [email protected] / [email protected]
190 x 114 x 53mm
Datalogging for up to 4096 days.
This enables you to get system
information for up to 100 inverters in real-time. Inverters must
be equipped with com card.
Sensor Box
2.2W
RS422 / Ethernet / WLAN, 6 Digital
Inpus, 4 Digital Inputs/Outputs
(Ripple Control Interface)
132 x 103 x 22mm
Datalogging for up to 4096 days.
Enables inverters to be connected
directly to the internet for remote
monitoring & control. Integrated
web server. Only 1 inverter in 100
needs to be fitted with this card.
Other inverters must be equipped
with com card.
Code
FRONIUS-SBOX
Fronius SBox
12VDC
1.3W
Power usage
Interfaces
197 x 110 x 57mm
Dimensions
Measurement of additional data by connecting
various sensors.
Information
RS422 (RJ45) x2 (In/Out)
140 x 100 x 28mm
Com card is a network card that
each inverter requires for data
communication.
c/w 3m Cable
FRONIUS-IS
Fronius IS
-
Remote-controlled power
reduction of PV systems
>100kW. Inverters must be
equipped with com card and
one datalogger is required per
system.
c/w 3m Cable
FRONIUS-MT Fronius PT1000
FRONIUS-WS
FRONIUS-AT
Fronius
WS
Cup Anemometer
Pulse Output
18.79Hz = 1m/s
85 x 93 x 115mm
PT1000
-40°C to +180°C
-
-
Mono Crystalline Si-Sensor
± [email protected]/m2
PT1000
-20°C to +150°C
110 x 40 x 40mm
50 x 100mm
This sensor is for
measuring the irradiated
energy.
12VDC
Module Temperature Wind Speed Sensor Ambient Temperature
Irradiation Sensor
c/w 3m Cable
Supply Voltage
230VAC (+10%/ -15%)
230VAC (+10%/ -15%)
1.43W
Dimensions
Information
Datamanager Card
Sensor on adhesive film
for module temperature
measurement.
The sensor measures the
exact speed of the wind.
-
Ø 6 x 50mm
Sensor for measuring
indoor & outdoor
temperature.
PURE SINE WAVE INVERTERS
Phoenix range of inverters are suitable for the widest range of applications. The design criteria have been to produced a true sine wave inverter with optimized
efficiency but without compromise in performance. Employing hybrid HF technology, the result is a top quality product with compact dimensions, light in weight and
capable of supplying power, problem-free to any load. A unique feature is very high start up power.
Phoenix Inverters
Code 12V
Code 24V
Code 48V
Max. con Power (25°C)
Peak power (W)
Input DC range
Output voltage
No. Load Consumption
Battery connection
Dimensions
GX-12/180
GX-24/180
-
180VA/175W
350
GX-12/800
GX-24/800
GX-48/800
700
1600
350VA/300W
10.5 - 15.5VDC / 21 - 31VDC / 42 - 62VDC
2.6W / 3.8W
3.1W / 5W / 6W
72x132x200mm
72x155x237mm
Features • Extra start-up power
• Low Battery Protection
23
GX-12/350
GX-24/350
GX-48/350
• Self diagnostic function
• LED fault diagnosis
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
800VA/700W
GX-12/1200
GX-24/1200
GX-48/1200
1200VA/1000W
2400
GX-12/3000
GX-24/3000
GX-48/3000
3000VA/2500W
6000
GX-24/5000
GX-48/5000
5000VA/4500W
10000
9.2 - 17.3VDC / 18.4 - 34VDC / 36.8 - 68VDC
230VAC +/- 3% 50Hz or 60Hz +/- 0,1%
6W / 5W / 4W
6W / 5W / 6W
Screw terminals
108x165x305mm
• Remote on/off switch
• Input/output protection
SOL
108x165x305mm
15W / 15W / 16W
25W / 25W
2+2 M8 Bolts
362x258x218mm 444x328x240mm
• 3000/5000VA models allow for
parallel or three-phase operation
SOLAR CHARGE CONTROLLER
The BlueSolar range includes both MPPT & PWM type charge controllers. Ultra fast maximum power point tracking (MPPT) will improve energy harvest by up to 30%
compared to PWM charge controllers. Pulse width modulation (PWM) charge controllers offer lower cost solutions with 3-stage battery charging and comprehensive
protection.
Code
Rated charge current
Max. load current
BLUESOLAR-5 BLUESOLAR-10 BLUESOLAR-20 BS-MPPT-75/15 BS-MPPT-100/15 BS-MPPT-75/50
BS-MPPT-150/70
SAP-20007AW-PACK
5A
10A
20A
15A
15A
50A
70A
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24V (Auto)
12/24/36/48V (Auto)
28/55VDC
28/55VDC
28/55VDC
75VDC
100VDC
75VDC
150VDC
10A
Battery Voltage
Control method
Max. solar voltage
Dimensions
10A
PWM
PWM
70 x 133 x 34mm
70 x 133 x 34mm
15A
20A
MPPT
PWM
76 x153 x 37mm
15A
50A
MPPT
MPPT
70A
MPPT
100 x 113 x 40mm 100 x 113 x 47mm 130 x 186 x 70mm 350 x 160 x 135mm
PRECISION BATTERY MONITORING
The essential function of a battery monitor is to calculate ampere-hours consumed and the state of the charge of a battery. Ampere-hours consumed is calculated by
integrating the current flowing in or out of the battery. Victron Battery Monitors are based on a powerful micro-processors programmed with algorithms for precision
monitoring.
For 2 Batteries
or Temperature
or Midpoint Monitoring
For 2 Batteries
Code
Input voltage
Current drawn
Potential free contacts
Dimensions
BMV602S
BMV700
BMV702
9.5-90VDC
9.5-90VDC
6.5-95VDC
6.5-95VDC
20-9999AH
20-9999AH
20-9999AH
20-9999AH
60V/1A/(N/O)
60V/1A/(N/O)
60V/1A/(N/O)
60V/1A/(N/O)
<4mA
Battery capacity
Comm port
BMV600S
<4mA
Yes
<4mA
Yes
69 x 69mm
<4mA
Yes
69 x 69mm
Yes
69 x 69mm
69 x 69mm
PRECISION WATERPROOF BATTERY CHARGERS IP65
Ultra high efficiency battery chargers. Multiple charging modes for different applications and battery types. Multistage charging. Battery life extending technology.
Code
Supply voltage
Charging current
Min. Battery
Dimensions
BPC-12/4
BPC-12/7
BPC-12/10
BPC-12/15
BPC-24/5
BPC-24/8
200 - 265VAC
180 - 265VAC
180 - 265VAC
180 - 265VAC
180 - 265VAC
180 - 265VAC
5A
8A
4A/0.8A
-
42 x 61 x 185mm
7A
24Ah
47 x 95 x 190mm
10A
30Ah
60 x 105 x 190mm
SOL
15A
45Ah
60 x 105 x 190mm
16Ah
47 x 95 x 190mm
24Ah
60 x 105 x 190mm
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
24
PV JUNCTION BOXES
Generator disconnection boxes are enclosures where PV arrays are electrically connected and where the isolation functon is performed in order to permit maintenance
work to be done. Junction boxes are supplied complete with fuse, surge and overload protection.
According to standards
• IEC 60634-7-712
• IEC 60943-7-3
• EN 61439-1-2
• IEC61643-11
NB: GRP= Glass reinforced Polyester
Code
ST039025P
ST049025P
ST068060P
ST148012P
SH161012
Strings
Voltage
Isc
25A
25A
63A
125A
160A
1000 VDC
1000 VDC
800 VDC
800 VDC
1200 VDC
3
4
6
14
16
Surge Protection
PST31PV
PST31PV
PST31PV
PST31PV
PST31PV
IP Rating
IP65
IP55
IP55
IP55
IP55
Material
ABS/PC
GRP
GRP
GRP
GRP
Size (mm)
Gland Size
225 x 305 x 130
285 x 380 x 185
285 x 570 x 185
380 x 760 x 225
760 x 380 x 225
M12/M16
M12/M16
M12/M16
M12/M16
M12/M16
HIGH RATING DC SWITCH DISCONNECTORS
Series 55DC/ 55PV switch-disconnectors are manually operated load break switches that provide safety
isolation for any low voltage circuit in photovoltaic applications.
According to standards
• IEC 60947-3
• IEC 60364-7-712
• EN 60947-3
• DIN VDE 0126
• VDE 0660-107 (1992)
• IEC 60364-4-410 9
General Characteristics
• Visual indication of contact position
• High thermal and dynamic withstand
• Operational load duty categories DC-21 and DC-22
Series bridges to be ordered seperately
Protection to ensure the safety against electrical shocks
220VDC
Code
55DC4014
55DC4026
55PV4012
55PV4016
400VDC
600VDC
80ADC
125ADC
-
125ADC
250ADC
-
125ADC
250ADC
-
Technical
55DC4014
1000VDC
8kV
Rated insulation voltage Ui
Rated impulse withstand voltage Uimp
55DC4026
1000VDC
8kV
800VDC
-
125ADC
160ADC
55PV4012
1000VDC
12kV
For specific types
Accessories
1000V
63ADC
125ADC
-
55PV4016
1200VDC
12kV
For all types
200mm
Lockable
Type
Internal Handle
55DC4014
55DC4026
55PV
25
26995042
26995052
26995052
Lockable
External
Handle + Shaft
55K1G200
55K1G200
55K1G200
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Set of 2
Series Bridge
Terminal screen
41DC4014
41DC4026
26092025
26984012
26984020
26984020
SOL
Auxilliary
Inter phase barrier
contacts
14001020 (200m) 26990031 (1NO/1NC)
14001025 (250m) 26990032 (2NO/2NC)
29980024
14001032 (320m)
14001050 (500m)
Shaft Extender
DC SWITCH DISCONNECTORS
Manually operated multiple load break switches that
ensure safe on-load opening and closing of photovoltiac
circuits on small and medium systems.
• Double breaking mechanism
• Contacts in series to optimize electrical characteristics
• External series links mounted in factory
• Silver alloy contacts
Voltage
Code
Connecting Screw
Standard wire (mm2)
Flexible (mm2)
Impulse Voltage Uimp kV
-
Current ratings @ load duty category DC - 21
300VDC
400VDC
500VDC
600VDC
800VDC
1000VDC
IP20 - Finger safe
Series links mounted in factory
A-5342PVO
A-5362PVO
M5
10-25
10-16
4
M5
10-25
10-16
4
M5
10-25
10-16
4
35ADC
-
25ADC
20ADC
15ADC
-
25ADC
10ADC
-
-
A-5382PVO
A-5102PVO
M5
10-25
10-16
4
25ADC
Double breaking
mechanism avoids
arching due to high
speed closing or
opening, independant
of operator turning
speed and pressure.
Accessories
Code
Description
AK1200523
Padlockable operating
handle
AK0100007
AK0000003
DIN Rail mounting
Plate
Base mounting plate
AK1740003
DIN Rail mounting kit with extension
shaft and door interlock.
PV COMPACT ENCLOSED ISOLATORS IP65
The IS-PV Series has been designed in order to offer optimum performance with enclosed switch disconnectors that use standard MC4 connectors, creating
extremely easy to install and connect solutions.
Simple & fast plugin
General Characteristics
• Original and compact design
• Base mounting
• Enclosure UV resistant
• Auxiliary contacts option
Padlockable Handle
Available
Code
Description
A-5342MC7
PV switch isolator 35A @
300VDC
(MC4 included)
A-5362MC7
A-5382MC7
PV switch isolator 25A @
400VDC/ 20A @ 500VDC
(MC4 included)
SOL
TEC
A-5102MC7
PV switch isolator 25A @
600VDC/ 16A @ 800VDC
(MC4 included)
PV switch isolator 25A @
1000VDC
(MC4 included)
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
26
LIGHTING & SURGE PROTECTION
Special Surge Protection for Invertors (e.g. Wind Turbines)
Max.
Uc
Class No. of
Code
Discharge Up
Poles
8/20µS
SLP-880V/3
40kA
3
2
<3.2kV
Photovoltaic System Protection
Max
No of
Code
Discharge
Poles
8/20µS
880V
Nominal
Discharge Up
8/20µS
SLP-170PHV/2
SLP-500PHV/2
SLP-700PHV/3
SLP-1000PHV/3
40kA
15kA
2
40kA
20kA
2
40kA
20kA
3
30kA
15kA
3
Uoc stc refers to the maximum voltage of the photovoltaic panel
0.8kV
4.0kV
3.6kV
4kV
Backup
MCB
Network
DIN
Width
160A
TN-S/TN-C/TT
3
Uc
Uoc stc
DIN Width
170VDC
500VDC
350VDC
500VDC
250VDC
750VDC
750VDC
1000VDC
2
2
3
3
GPV SURGE PROTECTION
Photovoltaic System Protection
No of Imax
Code
Class Poles 8/20
In
80/20
Iimp
Up
10/350
Uc
DIN Width Auxilliary
-
2.2kV
550VDC
2
N
PST31PV
PST25PV
PST41PV
2
2
1+2
2
40kA
3
40kA
20kA
-
3.0kV
1000VDC
3
N
2
-
40kA
12.5kA
1.9kV
1000VDC
3
Y
20kA
PST25/31: Surge protection devices Class II are developed to protect PV Photovoltiac networks against atmospheric lightning. These
units must be installed in parallel on the DC networks to provide common and differential mode protection. The design is based on
high energy MOVs equipped with specific thermal disconnectors and related failure indicators.
PST41: Surge protector devices Class I are recommended for both ends of the DC power supply line. Due to their extraodinarily
high discharge capacity, they are recommended for use on installations with elevated risk of direct lightning strikes. The protection is
based on high energy MOVs and specific thermal disconnectors achieving a superior protection level and a lack of follow-up current.
GPV FUSE PROTECTION
A range of fuse links in a 10 x 38mm packaging specifically designed for protection and isolation of photovoltiac strings.
The fuse links are capable of interrupting low overcurrents associated with faulted PV string arrays.
Temperature Derating Curves
General Characteristics
• Rated Voltage: 1000Vdc
• Time constant (L/R): under 1ms
• Rated breaking capacity: 33kA (VDC)
• Minimum interrupting rating 1.3 x In
Code
Current Rating
30F6PV
30F8PV
30F10PV
30F12PV
30F15PV
30F20PV
6A
8A
10A
12A
15A
20A
Power Loss
0.8In
In
1.8W
2.1W
2.3W
2.7W
2.9W
3.6W
1.1W
1.2W
1.3W
1.5W
1.7W
2.1W
DC FUSEHOLDERS
10x38 Fuse Holders for DC Applications
DIN
Thermal
Code
Fuse Size Poles Modules
Rating
211PV
32A
Accessories
Code
Description
21KE
According To
• IEC 60947-1
• IEC 60947-3
27
10 x 38
1 pole
Multipole assembly kits
Characteristics
• 1000VDC - DC-20B
• Mounting 35mm DIN rail
• Hight temperature resistant plastics
• Elevated insulation characteristics
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
1
For multipole fuse holders use multipole assembly kits - 21KE
PV JUNCTION BOXES
Make your solar installation more cost effective by reducing the wiring, improve reliability and reduce maintenance.
Code
Characteristics:
• Equipped with PV
dedicated surge arrestor
• With function or arrestor
failure alarm
• Adaptable to various
communication modules:
RS-485.
• Wireless communication
available ex-indent.
PVJ-BOX16
PV Array input voltage
PV Array Input string no.
<1000V
16
Maximum current of each string
Protection level
10A
IP65
Ambient temperature
-25°⁓+55°C
Communication mode
RS-485, RS-232
Relative humidity
<95%
Note: Includes DIN mount 24VDC 1.25A Power Supply
SOLAR MODULE ANALYSER
Code
PROVA200
PROVA300XP
Analyser
Description
Printer
• Maximum current (Imaxp) at Pmax
• Voltage at open circuit (Vopen)
• Current at short circuit
• Calculation of efficiency (%)
• Manual single point test
•
•
•
•
Voltage range: 0-60VDC
Current range: 0-6A
I-V Curve test for solar cell
Maximum solar power (Pmax) search by
Auto-scan (60V, 6A)
• Maximum voltage (Vmaxp) at Pmax
SOLAR PANEL MOUNTING SYSTEM
Pre-Assembled Brackets
Pre-Assembled Pole Bracket
Watts
1 Panel
Watts
1 Panel
60-120W BMF4301
170-270W –
Bracing Bar
Code
Alluminium or
Galvanised
BMF4021
BMF4022
BMF4023
BMF4024
BMF4025
BMF4026
BMF4027
BMF4028
BMF4029
BMF4001
BMF4100
2 Panel
2 Panel
Profile Joint
Positioning Support
BMF4003
BMF4110
–
DR275
Description
BMF4302 4m Bar 13x6mm Alu.
Solar Panel Clamps - (packs of 10)
End
Code
Cover for gap between panels - 4m
DM110
5-10W
–
20W
DM120
–
40-60W
DM275
DM175
Pre-Assembled Triangle Bracket
Galvanised
End Clamp
Aluminium Profile - 4m
Mid Clamp
Module Middle
Thickness Code
34
35
36
38
40
Module
Thickness
34 ÷ 37
BMF4011
38 ÷ 42
BMF4012
43 ÷ 47
BMF4013
48 ÷ 50
BMF4014
End Caps (packs of 10)
Clamp for
Crimped Plate
BMF4501
Adjustable
Tile Hook
Fixing Bracket
BMF4002
Adjustable
Roof Tile Hook
Code
46
50
BMF4008
BMF4004
BMF4005
42
48
Fixing Accessories - Stainless Steel
BMF4401
BMF4402
Fixing Plate: 150x55x5mm Fixing Plate: 50x200x5mm
SOL
BMF4004
BMF4006
BMF4005
BMF4303
BMF4006
BMF4303
Description
M8 x 20 Hammer-headed screws
M8 x 20 Hexagonal head screws
M8 Self-blocking flanged nut
4,8 x 32 Self-tapping hex screws
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
Pack
50
50
50
100
28
SOLAR MOUNTING SYSTEMS
We provide professional solutions for Solar photovoltaic mounting for residential, corporate and utility scale applications.
Features • Roof Top mounting: Tile, Tin & Tilt Tin/ tiled • Open area: Ground mounting/ pole mounting • Suitable for all roof types and PV modules
• Fast and simple installations
• High quality material in Aluminium 6005-T5
Panel Mounting
Code
Description
Code
Description
CK-FZ-F4200
Code
Adj Solar mid clamp
Solar standard rail splice
CK-FZH-TC
CK-FZH-013
Solar aluminium tin hook
Description
CK-FZ-AM
CK-FZ-SK
Solar standard rail 4.2m
CK-FZ-AE
Solar tin roof AL Clamp
Adj end clamp
CK-TM-1530
CK-FZA-FL
Solar Adj front leg
Solar Adj Tri structure 15-30
CK-FZH-01
Solar SUS304 Tile Hook
CK-FZH-021
Solar tin thin roof AL Clamp
CK-2V-3035
2V ground support 30/35 deg
CK-FSC-CP1
Solar Cable Clips
SOLAR ROOF TILT RACKING SYSTEM
ACDC is continually developing kits to use with our panels. These kits are designed for the most rugged conditions and consist of the highest quality components.
Code
GR-AD-FL
Description
GR-AD-FL 10/15
Front Support
* Use the following Parts Code: CK-FZ-F4200 (Solar Panel Profile)
Rear Support - 10-15cm
GR-AD-FL 15/30
Rear Support - 15-30cm
GR-AD-FL 30/60
Rear Support - 30-60cm
Specifications • High class aluminium alloy Al16005-T5 & stainless steel 304
• PV Modules: framed • Roof Slope: up to 60° • Suitable for pitched or flat roof
8 PANEL MOUNTING KITS
Kits include:
• Frame work & Clamps
• Structure fixing bolts/nuts
• Profile 4.2m
• Suited for 170-290W
Code
Description
Code
Description
29
CK-PM-08
Pole mounting kit
CK-TNC-08
Tin clamp mounting kit
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
CK-TL-08
Tile mounting kit
CK-GD-08
Ground mounting kit
SOL
CK-TN0-08
Tin mounting kit
CK-UT-08
Utility Ground mounting kit
CK-ADJ-08
Tin tilt mounting kit
CK-V2-08
Tin tilt mounting kit
SOLAR OFF-GRID MOUNTING KITS
ACDC Dynamics provides complete off-grid mounting kits. These kits include all brackets and
hardware needed to mount panels on any surface such as: walls, roofs, caravans, poles and etc.
Solar SLB series off-grid mounts. Fit for 1 Panel.
SOLAR-FLEX ADHESIVE
Solar-Flex white - 290ml
Code
WST-SAF-W
Elastic one-component
adhesive and sealant with fast
development of adhesive
strength.
It contains no substances that
hinder the coating of laquer
(eg. silicone), no solvents and
no isocyanate.
Code
SLB-0111
SLB-0112
SLB-0113
SLB-0102
SLB-0103
Module Frame
Mounting Holes
Module Power
Mounting Type
18mm
5.5mm x 8
5W
PoleMounted
30/35mm
3.5mm x12
10-30W
PoleAdjustable
35mm
4.5mm x 12
40-135W
Wall, Vertical
Surface
Adjustable
35mm
4.5mm x12
40-135W
Fixed
Bracket
35mm
4.5mm x12
40-135W
Flat
Surface
Adjustable
Features
PV CONNECTORS IP67
• For connecting to panel contacts
• Durable and weather-resistant
• Modules protected by means of
one or more diodes
• Temperature Range:
-40˚C - +90˚C
• UV-Resistant
• High-quality contacts
• Material: Contact: CuSn
Casing: PC/PA
PV panel box enclosure
Cable Size
2.5-10mm2
For secure and easy connection of PV modules in parallel.
MFF= Male/ Female/ Female Connectors
Code
905228-1
Description
PV MC4 MFF Branch
Pack
1
PV MC4 Male Branch Connector
FMM= Female/ Male/ Male Connectors
For strongly stressed adhesive
bonds in the following areas:
Code
905229-1
Description
PV MC4 FMM Branch
PV MC4 Female Coupling Connector
• Solar Power systems;
• Junction Boxes;
• Marking systems;
• Metalworking;
• Tank and apparatus
construction;
• Ventilation and air conditioning
and wherever silicone or
products containing
silicone are unsuitable.
Code
905207-1
905209-1
905211-1
904964-1
Core Cross
2.5mm2
2.5mm2
4-6mm2
4-6mm2
Cable Ø mm
3-6
5.5-9
3-6
5.5-9
Pack
1
Pack
1
1
1
1
PV MC4 Male Coupling Connectors
Code
905206-1
905208-1
905210-1
904963-1
• High initial adhesive strength on vertical surfaces;
• Broad range of adhesion, even on moist surfaces;
• Resistant to weathering and UV;
• Free of silicone, isocyanate and halogen;
• Solvent-Free, odour-free, non-corrosive;
• Sandable & can be painted over even when wet.
P3
903709
Description
PV MC4 Female Branch Connector
Solar-Flex has a very high initial
adhesive strength and also
enables adhesive bonds on
vertical surfaces indoors and
outdoors.
Advantages:
Code
Core Cross
2.5mm2
2.5mm2
4-6mm2
4-6mm2
Cable Ø mm Pack
3-6
5.5-9
3-6
5.5-9
1
1
1
1
PV MC4 Fly-Leads
Code
1000VDC UV Resistant
SOL
SLE-1M
SLE-2M
SLE-5M
SLE-10M
Description
1m 4mm PV Cable(Black) MC Male & Female
2m 4mm PV Cable (Black) MC Male & Female
5m 4mm PV Cable (Black) MC Male & Female
10m 4mm PV Cable (Black) MC Male & Female
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
30
SOLAR CABLE
Solar Cable (100m roll)
• Rated Voltage: 600/1000VAC
900/1500VDC
• Stranded tin-plated copper insulated
with XLPE under a PVC jacket.
Wire Stripper
Cut length
WIR
Size mm2
Code
SW101-*
SW102-*
SW103-*
INSTALLATION TOOLS & ACCESSORIES
Maxi Grip
X-PRO 50mm Shears X-PRO 50mm Shears
Wire Stripper
Solar Tool Kit
ED
ENT
PAT DOT
RED RD
AWA
ED
ENT
PAT DOT
RED RD
AWA
ED
ENT
PAT DOT
RED RD
A
W
A
Amps
2.5mm2
25
32
4mm2
41
6mm2
*Add cut length to code: 5M, 10M, 20M, 50M or 100M
MET
Code STRIP-7-SOLAR STRIP-SOLARMINI
An automatic stripper for
round cables used in PV
solar and electric fence
installation. Precise
adjustment allows easy
removal of multiple
insulation layers of solar
cables from 1,5-6mm².
BM1325
• Stripping depth stop • Innovative new spring
loaded opening action
• Compact wire
• For the easy stripping
stripper designed
for the solar industry and cutting of cables
• Especially designed
• Suits 1.5-6mm2
blade for cutting of
cable
aluminium and copper
• Side blade cutter
cables up to a size of
50mm²
BM1330
• Innovative automatic
opening system with
spring for an effective
cable stripping & cutting
• Innovative design with
bi-component handles
gaurenteeing less
cutting effort & better
palm hold
• Blade geometry with
variable edge
PV-BOX
BM1311
• Wire Shears
Aluminium box with foam
cushion for PV tools.
• Bi-Component
All tools in storage.
handle for greater
cutting force
• Non-slip serrated Solar Connector Spanner
blades
• Tempered stainless
steel blade
• Belt clip holder
PV-STX
SOLAR PUMPING SYSTEMS
• The system dispenses with energy storage devices, and stores water instead of electricity. It improves the reliability of the device and at the same time, it lowers
the construction and maintenance costs of the system dramatically.
• Patented technology adopted for controlling, automatic running, excellent stability and 98% energy conversion ratio.
• Full protection against lightning, dry running, blocking and overload.
Application:
• Desert control
• Sea water desalinization
• Agricultural irrigation
• Daily water supply
• Forest irrigation
• Remote watering troughs for animals
• Waste water treatment
Flow Water No. of PV
(m³/day)
Panels
Code
KW
Description
Head (m)
PS370-1
PS550-1
PS750-1
PS1100-2
PS1500-2
PS2200-1
PS3000-1
PS4000-1
0.37KW
Solar Pumping System
27-35m
10-7.5m³/day
20 x 40W
0.75KW
Solar Pumping System
45-61m
10-7.5m³/day
20 x 80W
0.55KW
1.10KW
1.50KW
2.20KW
3.7KW
5.5KW
Solar Pumping System
Solar Pumping System
Solar Pumping System
Solar Pumping System
Solar Pumping System
Solar Pumping System
37-52m
54-73m
68-91m
91-133m
118-169m
155-207m
10-7.5m³/day
10-7.5m³/day
10-7.5m³/day
10-7.5m³/day
15-10m³/day
15-10m³/day
System incl Inverter, Pump + Cable 30m + Connections
20 x 60W
20 x 120W
10 x 270W
22 x 170W
28 x 170W
36 x 180W
Order PV Panels Separately
Inverter Only
Code
PB400L
PB750L
PB1500L
PB2200L
PB3700H
PB5500H
Rated Output MPP
Current
Voltage
3A
5A
7A
11A
9A
13A
280-350V
280-350V
280-350V
280-350V
500-600V
500-600V
Features:
• Solar pumping inverter converts DC voltage from the solar array into AC voltage to drive the pump.
• With the function of MPPT (maximum power point tracking), it regulates the output frequency according to irradiation in real time to achieve the maximum power.
Product Advantages:
• To drive pumps equipped with 3-phase induction motors.
• Optimized SPWM (Sinusoidal pulse width modulation).
• Various operation modes and MPPT algorithms are available.
• Option of water-level detection and control is available.
31
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
• Adjustable speed range of pump based on the actual situation (available solar power)
of the system
• Protection functions: lightning, over/low input voltage, over current and overload
protection, etc.
SOL
DC SUBMERSIBLE PUMPS
Features
• Floating impeller design
prevents sand blockages
• Highly durable
• Can handle upthrust load
Application
• Domestic & Municipal
water supply
• Irrigation
• Industrial & Mining
• Ponds & Gardens
Code
3TSS 0.5-28-12/80
3TSC 1.9-32-36/250
3TSC3.5-34-48/400
3TSC2-80-48/400
4TSS2.5-70-48/500
4TSS1.8-120-96/750
4TSS2.5-140-110/1000
4TSC4-57-48/500
4TSC12.5-44-110/1000
5TSS5-80-110/1200
Accessories Included
• Liquid Level Sensor
• Torch light
• Connecting cable
• Control Box
• Water level Sensor
Voltage
Power
Max. Flow Rate
80W
200W
400W
400W
500W
750W
1000W
500W
1000W
1200W
12VDC
36VDC
48VDC
48VDC
48VDC
96VDC
110VDC
48VDC
110VDC
110VDC
0.5m /h
1.9m3/h
3.5m3/h
2m3/h
2.5m3/h
1.8m3/h
2.5m3/h
4.0m3/h
12.5m3/h
5m3/h
3
Pump Size
Max. Head
28m
32m
34m
80m
70m
120m
140m
57m
44m
80m
3"
3"
3"
3"
4"
4"
4"
4"
4"
5"
Order PV Panels Separately
Solar Panels
100W x 1
90W x 3
130W x 4
170W x 4
130W x 4
80W x 14
100W x 14
170W x 14
100W x 14
100W x 16
DC SOLAR FOUNTAIN PUMPS
Application Area
Accessories
Eco-F
nd
ly
Pump Controller, Brass Impeller,
Cable Connector, Water Level
Sensor, Cable for Solar Panel,
Solar Flash Light.
rie
This product is mainly used
for fountain pumps, circulation or small irrigation applications.
TSQB
Pump Type
TSQB2.0-25-24/120
TSSGJ3.2-18-24/120
TSQB2.2-37-36/210
Voltage
24VDC
24VDC
36VDC
Eco-F
nd
ly
Accessories
rie
Power
120W
120W
210W
Max. Flow Rate
2m3/h
3.2m3/h
2.2m3/h
Max. Head
I/0 Size
1" x 1"
1" x 1"
1" x 1"
25m
18m
37m
Order PV Panels Separately
Required PV Panels
80W x 2
80W x 2
90W x 3
DC SOLAR POOL PUMPS
Pump Controller, Brass Impeller,
Cable Connector, Water Level
Sensor, Cable for Solar Panel,
Solar Flash Light.
Application Area
This product is mainly used for
swimming pool pumping applications.
Pump Type
Voltage
Power
TSSP18-12-72/750
72VDC
750W
TSSP25-15-110/1200
TSSP30-20-110/1500
110VDC
110VDC
TSSP16-15-48/500
48VDC
TSSP
Max. Flow Rate
Max. Head
Order PV Panels separately
Order PV Panels Separately
15m
1.5" x 1.5"
I/0 Size
Required PV Panels
18m3/h
12m
2" x 2"
80W x 14
1200W
25m /h
15m
2.5" x 2.5"
100W x 16
1500W
30m /h
20m
3" x 3"
100W x 16
500W
16m3/h
3
3
SOL
170W x 4
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
32
SOLAR GEYSER
Solcrafte Solar Hot Water Solutions
Solcrafte is a solar collector with an integrated tank. It offers various benefits such as frost
protection, easy installation and aesthetic design. Quick installation saves you time and money.
Solcrafte is the answer: connect it either directly to the water lines or pre-feed it into an existing
geyser. Standard packaging includes a mounting kit (either on-roof @ 0º or flat roof @ 45º), a
Twin Port valve and a Pressure Reducing valve.
Code
Perfect for
use as stand-alone
unit or as a prefeed
system for a geyser.
Number of collectors
Collector area
Tank size in liters
Size (L x W x H)
Max Temp/Pressure
*Mounting system 0° / 45°
Accessories
Code
SOL 90-*
SOL 150-*
1
1.1m2
90l
2184x510x212mm
100˚C/4 bar
Incl.
1
1.8m2
150l
2184 x 800 x 212mm
100˚C/4 bar
Incl.
SOL 200-*
1
2.4m2
200l
2184x1100x212mm
100˚C/4 bar
Incl.
Description
SOL-1279
Optional screw-in heating element (2kW)
Filling pump with container hose and pressure pump (for filling and
bleeding the collector system)
Anti-freeze concentrate 5l (Polypropylene Glycol)
Anti-freeze concentrate 10l (Polypropylene Glycol)
SOL-1039
SOL-1037/ 5
SOL-1037
Optional - Pool Heating Set "Complete"
Code
Description
Heating Element
SOL-3172
Filling Pump
SWT20
Heating kit for swimming pools
of up to 30,000 lt. Kit consists
of 4 collectors, SWT20 heat
exchanger, circulation pump
and an 18 litre expansion tank
* Mounting brackets and Anti-Freeze not included.
HEAT PUMPS
Using a small amount of energy, a heat pump simply transfers heat from one source to another in order to create hot and cold water
for residential, commercial and industrial applications.
Code
Power Supply
Rated Heating Capacity
Rated Power Input
Refrigerant
Compressor Type
Max. Outlet Water Temp.
Noise
COP (heating/ work done)
SDAW025-300L
220V / 1Ph /50Hz
2.6KW
0.75KW
R410A
Rotary
50°C
48dbA
3,5W/W
SDAW3.5-220
220V / 1Ph /50Hz
3.5KW
0.9KW
R410A
Rotary
60°C
52dbA
3,89W/W
High Pressure System - SABS Approved
Code
Tank Length ( mm)
1680
2160
Code
Tank Length ( mm)
SL-NF1.8-16
SL-NF1.8-18
1225
1446
Low Pressure System - SABS Approved
Tank
Capacity
Collector
150L
200L
15 Tubes
20 Tubes
Tank
Capacity
Collector
100L
150L
Accessories for Low Pressure System - SABS Approved
SL-NF16-TUBE
SL-NF18-TUBE
SL-NF-FTANK
SDAW6.7-220
220V / 1Ph /50Hz
7.2KW
1.79KW
R410A
Rotary
60°C
54dbA
4,02W/W
SDAW11.2-380
380V / 3Ph /50Hz
10.5KW
2.55KW
R417A
Rotary
60°C
55dbA
4,12W/W
SABS SOLAR GEYSER
ASHP-1858-15
ASHP-1858-20
Code
SDAW4.6-220
220V / 1Ph /50Hz
5KW
1.28KW
R410A
Rotary
60°C
53dbA
3,91W/W
Description
Spare Glass Tube for 100L low pressure
Spare Glass Tube for 150L low pressure
Spare filler tank for 100/ 150L low pressure
High Pressure
1.86
2.49
Collector
Area (m2)
1.67
1.88
16 tubes
18 tubes
Low Pressure
Collector
Area (m2)
Order Mixing Valve Seperately
Code
SL6-C1301BX003
Mix/Tempering Valve
• Inner tank: SUS304-2B (Low Pressure), SUS316 (High Pressure)
• Working pressure: 0.6MPA (High Pressure), 0.1MPA (Low Pressure)
• Vaccum tube: 58*1800mm 2.2mm thickness with special coating to aid absorbtion
• Frame: Galvanized steel 1.5mm
• Insulation: 50mm of high density polyurethane foam - Heat preservation: 72hrs
• Hail resistance: 40mm
All the prices include tank, heat pipe vacuum tubes, frame, P/T valve, Air vent valve, Magnesium rod, screws & nuts and carton box only.
33
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
WIND GENERATORS
Deltatronic wind generators are the latest design in wind generating technology. Units are built for harsh environments
using aluminium and stainless steel. Wind speed, vibration and generator RPM are electronically analysed and
controlled. Fitted with an emergency electronic braking system. The high quality alternators fitted to the generators are
manufactured exclusively for Deltatronic by Ducati energia.
Code
DTWIND-3000
DTWIND-1500
3000W
Maximum Power
1500W
0-300VAC
Output Voltage
0-300VAC
12V x 4 (102Ah batteries)
Aux. Voltage
12V x 2 (102Ah batteries)
Yes
Pure Sine Inverter
Yes
Yes
Charge Regulator
Yes
2m/sec (7.2km/h)
Start Speed
2.2m/sec (8km/h)
12.5m/sec (45km/h)
Run Speed
12.5m/sec (45km/h)
3
No. of Blades
3
3.1m
Blade Dia
2.1m
-20˚C to +45˚C
Temp Range
-20˚C to +45˚C
Yes
Wind Brake
Yes
* Kits Includes: All accessories except the 6m mounting pole.
Mounting pole specification available from our technical department.
Spare Parts
Code
6061T6
DTANE
JACK05
DTKIT-1
Code
Description
DTKIT-2
DTALT
DTINV-1500
DTINV-3000
SY120102
Aluminium blade for DTWIND-1500/3000
Anemometer, wind speed monitor
DT Wind System controller
Ball bearings, slipring assembly, rectifier,
gas shock absorber
Description
Complete body assembly
Alternator (same for both models)
1.5kW Inverter for DTWIND-1500
3.0kW Inverter for DTWIND-3000
12V 102Ah Battery
HYBRID WIND & SOLAR TURBINES
Q-Series are small all-weather wind turbines which produce 400-1000W. These units are small in size, easy to install,
low cost, high efficiency, and could be used in a variety of geographical climate conditions.
Kit Code
Rated Power (W)
Rated Voltage (VDC)
Rated Current (A)
Rotor Diameter (M)
Start-Up Wind Speed (m/s)
Rated Wind Speed (m/s)
Max. Wind Speed (m/s)
Wind Turbine Type
Q400
Q1000
Q600
1000W
48
41
1.8
2.5-4
13
45
600W
24
25
1.6
2.5-4
10.5
45
400W
24
16
1.5
2.5-4
9.6
45
Permanent magnet
synchronous generator
Permanent magnet
synchronous generator
Permanent magnet
synchronous generator
Mechanical
15-20yrs
Mechanical
15-20yrs
Carbon Fibre Reinforced Plastic
Mechanical
15-20yrs
3
6m
Sine Wave
3
6m
Sine Wave
3
6m
Sine Wave
Yaw Mode
Wind Turbine Lifespan
Blade Material
Blade Quantity
Tower Height
Matched Inverter Type
Kit Includes: Sine Wave Inverter, Wind Turbine, Blades, Pole and Wind/Solar Hybrid Controller
Hybrid Charge Controller
Code
Wind Turbine Max Power (W)
Rated Battery Voltage (V)
Wind Turbine Max Input Current (A)
PV Max Charge Current
Display
Output Voltage
Output Current
SOL
SOL
SPWS05A-24 SPWS06A-24
500W
24V
40A
10A
LCD
28V
0-25A (adj)
600W
24V
40A
10A
LCD
28V
0-25A (adj)
SPWS10A-24
1000W
48V
60A
10A
LCD
56V
0-50A (adj)
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
34
LINE INTERACTIVE UPS
Line-Interactive Modified Sine Wave UPS - Compact. C/W battery
Code
D-650
D-800
D-1000
D-1200
D-1500
UPS-1700D
UPS-2200D
Watts VA
Size (mm)
Standby Time No. of batteries
145 x 320 x 65
145 x 320 x 65
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
165 x 370 x 140
650VA
800VA
600VA
1200VA
1500VA
1700VA
2200VA
390W
480W
600W
720W
900W
1200W
1320W
5-10min
5-10min
5-10min
5-10min
5-10min
5-10min
5-10min
1
1
2
2
2
3
3
Line-Interactive Pure Sine Wave UPS - Units have built-in battery
Standby Standby
Code
Watts kVA Size (mm)
Time Full Time Half
Load
Load
KI1000
KI2000
KI3000
700 W
1400 W
2000 W
1KVA
2KVA
3 KVA
156 x 450 x 220
198 x 525 x 347
198 x 525 x 347
6min
6min
6min
10min
10min
10min
• Software CD (included)
• AVR Function. Auto voltage regulator
• Over charge/discharge protection.
• Overload and circuit protection.
• LCD Display.
• Full load backup time 4mins.
• Half load backup time 16mins.
• Wide input voltage range: 140-275VAC
• Output voltage: 230VAC ± 10%.
• Spare batteries 12V/7AH SY1270
DC
Voltage
24
48
72
• Wide Input Voltage: 150-300 VAC
• Output voltage: 220/240 ±2%
KI Series
Application
• Commercial Facility
• Hub and Network device
• Point of Sale
• Router
• Data Centre
• Computer Room
• Digital Technology
• Intelligent battery Charger
• User - Friendly LCD Display
• Reliable online interactive design
• Fully Functional Protection
• Intelligent RS232
Communication Port
• Low Battery, Overload ,
short-circuit and over
temperature
• Wide Input Voltage:
150-300 VAC
• Output voltage:
220/240 + /- 2 %
SERVER COMPACT UPS
Online Compact Server UPS 1 phase - Without transformer. Units have built-in battery
• Output isolation transformer
Standby Standby DC
• Wide input voltage range
Code
Watts kVA Size (mm)
Time Full Time Half Voltage • Full protection function
Load
Load
KRJ Series
KR1000-J 700W
KR2000-J 1400W
KR3000-J 2100W
KR6000-J 4200W
Application
1KVA
2KVA
3 KVA
6 KVA
440 x 500 x 2U
440 x 500 x 2U
440 x 500 x 2U
440 x 600 x 3U
6min
5min
5min
5min
15min
15min
15min
15min
36
72
96
192
• Rack Device
• Data Centre
• Point of Sale • Precision Instrument
• Computer Room • Hub and Network device • Router
• Commercial Facility Point
For Extended Operating Time please see UPS External Battery Cabinets on Page 31
• High reliability and performance
• Intelligent RS232
Communication Port
• UPS management software
(optional)
• External battery bank (optional)
• SNMP adapter or USB (optional)
• Wide Input Voltage: 165-275VAC
• Output voltage: 220/240 + /- 2 %
ONLINE UPS
Pure Sine Wave UPS - Single phase 230V/230VAC. Without transformer. Units have built-in battery.
• Output isolation transformer
Standby Standby DC
Code
Watts kVA Size (mm)
Time Full Time Half Voltage • Wide input voltage range
Load
Load
• Full protection function
KR1000 LCD 700W
KR2000 LCD 1400W
KR3000 LCD 2100W
KR6000 LCD 4200W
KR1110S 7000W
Application
KR Series
KR31 Series
35
1 KVA
2 KVA
3 KVA
6 KVA
10 KVA
156 x 400 x 220
198 x 490 x 347
198 x 490 x 347
255 x 640 x 700
255 x 640 x 700
6 min
5 min
5 min
5 min
5 min
15min
15min
15min
15min
15min
• IT Device
• Telecommunication
• Industry
• Data Centre
• Commercial Facility
For Extended Operating Time please see UPS External Battery Cabinets on Page 31
36
72
96
192
192
• High reliability and performance
• Intelligent RS232
Communication Port
• UPS management software
(optional)
• External battery bank (optional)
• SNMP adapter or USB (optional)
• Wide Input Voltage: 165-275VAC
• Output voltage: 220/240 + /- 2 %
Pure Sine Wave UPS - Three Phase (IN) to Single Phase (OUT) Without transformer. Unit only uses external standby battery
connection in Battery Cabinet. 400VAC 3 Phase +N/ 230VAC Single Phase.
• IGBT inverter & output isolation
transformer
DC
Standby
Code
Watts kVA Size (mm)
•
High reliability DSP control
Voltage
Time
• Wide input voltage range
7000W 10 KVA 255 x 640 x 700 See table for UPS BCP
192
KR3110
• DC cold start function
10.5KW 15 KVA 255 x 740 x 785 See table for UPS BCP
240
KR3115
• Full protection function
16KW
20 KVA 255 x 740 x 785 See table for UPS BCP
348
KR3120
• Intelligent RS232 /RS485 Com Port
• Intelligent battery monitor system Application
MMBM (optional).
• IT Device
• Telecommunication
• Industry
• Wide Input Voltage : 380 +/-25 % VAC
• Data Centre • Commercial Facility
• Output voltage : 220 +/- 1 %
For Extended Operating Time please see UPS External Battery Cabinets on Page 31.
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
SOL
BC1
ONLINE UPS
Pure Sine Wave UPS - Three Phase (IN) to Three Phase (OUT) Without transformer.
Unit only uses external standby battery connection in battery cabinet.
Battery & Battery Box to be ordered separately.
Code
Watts kVA
KR-3310
KR-3320
KR-3330
KR-3340
KR-3350
KR-3360
8 KW
16 KW
24 KW
32 KW
40 KW
48 KW
Size (mm)
400 x 800 x 1180
400 x 800 x 1180
400 x 800 x 1180
500 x 800 x 1600
500 x 800 x 1600
500 x 800 x 1600
10KVA
20KVA
30KVA
40KVA
50KVA
60KVA
Standby
Time
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
DC
Voltage
348
348
348
348
348
348
Pure Sine Wave UPS - Three Phase (IN) to Three Phase (OUT) With Isolation Transformer
FR-UK33080
FR-UK33100
FR-UK33120
FR-UK33160
FR-UK33200
Application
64 KW
80 KW
96 KW
128 KW
160 KW
80KVA
100KVA
120KVA
160KVA
200KVA
1200 x 800 x 1600
1200 x 800 x 1600
1200 x 800 x 1600
1200 x 800 x 1600
1800 x 800 x 2000
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
See table for UPS BCP
348
348
348
348
348
• Data Centre
• Precision Instrument
• Computer Room
• Intelligent Equipment
Extended Operating Time please see UPS BCP. For standby times, please see below
• IGBT inverter and output isolation
transformer
• 3 phases UPS allow 100%
unbalance load
• Full DSP control, high reliability
and performance
• Wide input voltage range
• DC cold start function
• Advanced battery charging
management
• Intelligent fan speed control
• ECO mode is available
• Intelligent RS232/RS485
Communication Port
• Advanced no-master-slave
parallel technology (included)
• Intelligent battery monitor system
- MMBM-2 (optional)
• Wide Input Voltage: 380/400
+/-20% VAC
• Output voltage: L-N 220/230 +/1%, L - L 380/400 +/- 1%
EXTERNAL BATTERY CABINET
C-Type Battery Cabinet, No Wheels
Product
Model
Layer
Size
Battery Capacity
A-Type Battery Cabinet, c/w wheels
Product
Model
Layer
Size
Battery Capacity
Quantity (Panasonic Size )
17/24/38/65/100AH
17/24/38/65/100AH
24/38/65/100AH
24/38/65/100AH
20/12/8/4/4 PCs
36/20/16/8/8 PCs
32/32/16/16 PCs
40/40/20/20 PCs
C-1B
C-2
C-6
C-12
C-20
C-24
C-32
BAT-A4
BAT-A8
BAT-A16
BAT-A20
1
1
2
3
4
4
4
2
2
4
4
280 x 190 x 220
470 x 390 x 310
420 x 450 x 600
780 x 455 x 900
950 x 455 x 1190
1150 x 455 x 1190
780 x 880 x 1190
420 x 450 x 670
760 x 450 x 770
780 x 455 x 1360
950 x 455 x 1360
24AH/17AH
17/24/38/65/100AH
17/24/38/65/100AH
17/24/38/65/100AH
24/38/65/100AH
65AH/100AH
65AH/100AH
Quantity (Panasonic Size )
2/3 PCs
10/6/4/2/2 PCs
20/16/12/6/6 PCs
30/24/12/10 PCs
56/40/20/20 PCs
24 PCs
32 PCs
EXTERNAL BATTERIES FOR EXTENDED BACK-UP TIME
30 mins
standby
24Ahx3
Power
24Ahx6
24Ahx8
Voltage
24Ahx16
DC
Output
Number 24Ahx16
USB
Output
of
38Ahx29
Batteries 65Ahx29
65Ahx29
100Ahx29
100Ah×29
65Ah×58
100Ah×58
100Ah×87
100Ah×87
100Ah×116
500Ah×174
hr
1 hr standby 2standby
38Ahx3
38Ahx6
38Ahx8
38Ahx16
65Ahx16
100Ahx29
100Ahx20
65Ahx29
100Ah×58
100Ah×58
100Ah×87
100Ah×87
100Ah×116
100Ah×145
500Ah×174
-
65Ahx3
65Ahx6
65Ahx8
65Ahx16
100Ahx16
65Ahx58
65Ahx58
100Ahx58
100Ah×87
100Ah×87
100Ah×116
100Ah×116
100Ah×145
-
4 hrs
standby
8 hrs
standby
UPS
KVA
100Ahx3
100Ahx6
100Ahx8
100Ahx16
100Ahx32
100Ahx87
100Ahx87
100Ahx87
100Ah×116
100Ah×116
-
100Ahx6
65Ahx12
100Ahx16
100Ahx32
100Ahx48
100Ahx80
100Ahx120
-
1 KVA
2 KVA
3 KVA
6 KVA
10 KVA
15 KVA
20 KVA
30 KVA
40 KVA
50 KVA
60 KVA
80 KVA
100 KVA
120 KVA
160 KVA
200 KVA
Series Series size
size KR KR 33-L
31-L
KR1000L-LCD KR2000L-LCD KR3000L-LCD KR6000L- LCD KR-1110
KR3110 KR - 3310
KR3115 KR3120 KR - 3320
KR - 3330
KR - 3340
KR - 3350
KR - 3360
FR-UK33080
FR-UK33100
FR-UK33120
FR-UK33160
FR-UK33200
Series size Series size
KR-L-J
KR-L
KR1000 L-J
KR2000 L-J
KR3000 L-J
KR6000 L- J
-
Larger sizes available on request
BC1
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
36
AUTOMATIC VOLTAGE REGULATORS (A.V.R)
Output of this mains stabiliser is regulated to within 1% for input -15% to +20%
of nominal range
Constant Voltage Transformer (C.V.T.)
Dimensions (mm)
Outlet
Depth
Width
Height
260
260
260
260
330
330
330
370
370
420
420
420
188
188
188
188
350
350
350
426
426
460
460
460
360
360
360
360
400
400
400
450
450
600
600
600
1 x 15A
1 x 15A
1 x 15A
1 x 15A
1 x 15A
1 x 15A
1 x 15A
2 x 15A
2 x 15A
Terminals
Terminals
Terminals
* Specify voltage when ordering.
Model
Rating
VA
Standard
Voltage*
TE 300
TE 500
TE 750
TE 1000
TE 1500
TE 2000
TE 3000
TE 4000
TE 5000
TE 6000
TE 7000
TE 8000
300
500
750
1000
1500
2000
3000
4000
5000
6000
7000
8000
230/230
230/230
230/230
230/230
230/230
230/230
230/230
230/230
230/230
230/230
230/230
230/230
Other voltages made on request.
Single Phase Voltage Regulator (Output load regulation 1% or 3% selectable) Digital display
Output
Code
Output Amps
Size (mm)
Kgs
Connector
SDC-1000VA
SDC-1500VA
SDC-2000VA
SDC-3000VA
SDC-5000VA
SDC-8000VA
SDC-10KVA
4.35A
6.50A
8.70A
13A
21A
34A
43A
Socket
Socket
Socket
Terminals
Terminals
Terminals
Terminals
Single Phase Compact AVR (Output regulation 8%)
SR-500VA
SR-1000VA
SR-1500VA
2.1A
4.35A
6.50A
Specifications
• Technology: servo motor type transformer
• Input Voltage: 140VAC - 260VAC
• Input Frequency: 50/60Hz
• Output Voltage: 230VAC
• Efficiency: 98%
• Display: LED display input voltage/output voltage
Socket
Socket
Socket
230 x 120 x 150
260 x 140 x 170
260 x 140 x 170
310 x 220 x 250
310 x 220 x 250
430 x 465 x 305
430 x 465 x 305
6.2
7.3
7.9
11
13
22
27
241 x 169 x 90
241 x 169 x 90
261 x 169 x 114
1.78
4.3
5.2
• Protection: High voltage protection
Low voltage protection
High temperature protection
Overload protection
• Delay time protection
• Short circuit protection
Single Phase Voltage Regulator (Output load regulation 3%) Analogue display
MVR-500VA
MVR-1000VA
Features
2.1A
4.35A
• Protection: High voltage protection
Low voltage protection
High temperature protection
Overload protection
Socket
Socket
248 x 170 x 158
263 x 180 x 170
3.8
6.2
• Servo motor type
• Input voltage range: 140-260VAC
• Output voltage: 220VAC
• Analogue input and output voltage display
Single Phase Voltage Regulator (with zero - cross switching technology)
- (Output regulation 5%)
E-600
E-1200
E-2400
Features
1.3A
2.6A
5.2A
• Relay type automatic voltage regulator
• Input Voltage range: 140VAC - 280VAC
• Input Frequency: 50/60Hz
• Output Voltage: 230VAC
• Efficiency: 98%
• Output accuracy: ±5%
37
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
BC1
Socket
Socket
Socket
210 x 140 x 135
210 x 140 x 135
240 x 160 x 120
• Protection: High voltage protection
Low voltage protection
High temperature protection
Time delay protection
Short circuit protection
3.0
3.5
5.3
OFF GRID SOLAR SYSTEM APPLIANCE CALCULATOR
Name:
Company:
Telephone:
Email:
Column 1
Column 2
Appliance
Guideline Power Actual Power
Consumption (W) Consumption (W) Quantity
EXAMPLE
Lights
Lights
Lights
Lights
DSTV Decoder
Radio
Television
Television
DVD Player
Hi-Fi System
Computer
Laptop
Modem
Network Router
Inkjet Printer
Laser Printer
Alarm System
Electric Blanket
Fan
Hair Dryer
Fridge
Fridge
Freezer
Iron
Kettle
Toaster
Microwave
Washing Machine
Dish Washer
Oven
Vacuum Cleaner
Pool/Water Pump
500
5
18
60
100
100
50
120
250
40
100
120
70
10
15
130
400
30
70
60
1400
180
110
160
1200
2000
1400
1300
900
2000
3000
1500
750
100
2
Column 3
Column 4
Column 5
Peak Power
Consumption
Usage in a 24h
Period (Hours)
Total Power
Consumption (Wh)
6
1200
200
TOTAL
TOTAL
Peak Power Consumption
How to use the AC/DC Dynamics Appliance Calculator
Total Power Consumption
Referring to the EXAMPLE in the first line; fill in your 'real' power consumption in Watts in the first column. In column 2, you fill in how many of the appliances
you have if they have the same power consumption. In the third column you fill in how many hours in a 24 hour period you will be using this specific appliance.
Once you have completed the first 3 columns, you will have to calculate your totals.
How to Calculate you Totals
Peak Power Consumption - Column 1 x Column 2 = Column 3
Add up Column 3 below
Total Power Consumption - Column 3 x Column 4 = Column 5
Add up Column 5 below
Once you have your PEAK POWER CONSUMPTION and TOTAL POWER CONSUMPTION, you can email us a copy of your sheet to [email protected]
and we will calculate an off grid solar system based on your requirements.
SOL
Due to our policy of continuous improvement we reserve
the right of modifying specifications and appearance.
38
HEAD OFFICE
NATIONAL
P.O. Box 3812, Edenvale
1610, South Africa
26 Nguni Drive [email protected]
Longmeadow Estate West Tel: 010 202 3300
Edenvale, Gauteng Fax: 087 807 5441
South Africa www.acdc.co.za
Sales
Technical
Tel: 010 202 3400
Tel: 010 202 3500
Germiston
Cape Town
Pinetown
Riverhorse
Tel: 011 418 9600
Tel: 021 510 0710
Tel: 031 700 4215
Tel: 031 492 4800
Distributors and Franchises throughout Southern Africa
www.acdc.co.za
Third Edition March 2014
AC/DC SFC SOLAR
Distributed by:
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement