Technisonic RC-500/550 Installation and Operating Instructions

Below you will find brief information for Remote Control Head RC-500. The RC-500 is a microprocessor-controlled display and keypad capable of RS232 serial communications with the TFM-500. The front panel is similar to the TFM-500 and displays the same information.

PDF Download
Document
Technisonic RC-500 Installation and Operating Instructions | Manualzz

Advertisement

Advertisement

Advertisement

Key features

  • Secondary control for TFM-500
  • Microprocessor-controlled display
  • RS232 serial communications
  • Front panel similar to TFM-500
  • Displays same information as TFM-500
  • Panel mount
  • Operating Temperature Range: -45° C to +70° C

Frequently asked questions

The RC-500 provides a secondary slaved control point for the TFM-500 where the TFM-500 is not accessible or visible to the second user.

There are four variations of the Model RC-500 Transceiver. All units offer identical features and performance except for the following differences: RC-500, P/N 991097-1 GREEN display and 28 Volt back lighting RC-500, P/N 991097-1 (5V) GREEN display and 5 Volt back lighting. RC-500, P/N 991097-2 RED display and 28 Volt back lighting. RC-500, P/N 991097-2 (5V) RED display and 5 Volt back lighting. Both P/N's 991097-1 and 991097-2 are always provided with 28 Volt back lighting unless a specific request is made for 5 Volt AC operation.

The RC-500 requires 28.0 VDC ± 15% at 1.0 A Max.

The RC-500 is designed to be Dzus mounted and should be installed in conjunction with an IN-RC5 installation kit (P/N 999092).
ALP:
Preparing document for printing…
0%