D:\\MDC protocol\\MDC\271\256\274\255\\MDC_UE_M

D:\\MDC protocol\\MDC\271\256\274\255\\MDC_UE_M
SEC- VD- DSW Multiple Display Control - 0008
Ver. 0. 63
2011- 06- 22
Multiple Display Control Protocol
for SyncMaster
UE46A/UE55A/
ME40A/ME46A/ME55A
Copyright © 2003 2011 Samsung Electronics Co., Ltd
SEC- VD- DSW Multiple Display Control - 0008
Copyright notice
This document is Copyright © Samsung Electronics, Co. - all rights reserved.
「This document is a technical asset of Samsung Electronics, Co. and using or copying
this material without the authorization from the technical data management group is strictly
prohibited..」
Contact Information
Display S/W Group, VD Business Division
Samsung Electronics Co., Ltd
Address : 416, Maetan-3Dong, Paldal-Gu,
Suwon City, Kyungki-Do, Korea
442-742
Telephone : 82-31-277-1715
E-mail
: [email protected]
[email protected]
Prepared by : Display S/W, Video Display Division.
Status : Prepared
Subject : Technical Writer, Programmer, Developer
Outline : Protocol type document of Multiple Display Control 1.0
History :
Version
Date
Content
Prepared by
0.5
2011.01.13
Make temporary Document for Rigel
HJ.Du
0.6
2011.01.23
HJ.Du
0.61
2011.01.24
Auto Motion Plus enable
Add Channel Up/Down command
0.62
2011.06.14
Modified for UE/ME model
HJ.Du
0.63
2011.06.22
0x14 Command Modified
T.H.Kim
Compared by
HJ.Du
1
1. INTERFACE
1. 1. Connecting Method
There are 2 available ways of connecting. one is RS232, the other is RJ45.
1) Connecting method(with RS232)
-
As of Figure 1-1, connect RS232-In(9Pin) to Personal Computer, connect the next
TV of Display to be connected from RS232-Out (9Pin).
-
In doing so, each TV or Monitor ID can be given from 0 to 99.
-
ID cannot be given duplicated.
-
When granting ID, it does not need to be given out in the connecting order.
Figure1-1 PC,TV or Monitor connecting method(with RS232)
2
2) Connecting method(with RJ45)
-
There are several ways to connect Personal Computer and TV(or Monitor).
-
As of Figure 1-2, connect Hub and Personal Computer(using Ethernet). connect each
TV of Display to be connected to the Hub.
-
In doing so, each TV or Monitor must have an IP address.
TV or Monitor connected by protocol's IP address must have the same ID with the
protocol's ID.
-
-
Each TV or Monitor ID can be duplicated.
Figure1-2 PC,TV or Monitor connecting method(with RJ45)
3
3) Connecting method(with RJ45 & RS232C)
-
As of Figure 1-3, connect TV and Personal Computer(using Ethernet), connect the
next TV of Display to be connected from RS232-Out (9Pin).
-
In doing so, only TV(connected to Personal Computer) needs an IP address. and each
TV or Monitor ID can be given from 0 to 99.
-
ID cannot be given duplicated.
-
When granting ID, it does not need to be given out in the connecting order.
Figure1-3 PC,TV or Monitor connecting method(with RJ45 & RS232C)
4
1. 2. Connection Spec.
1) RS232 Connection Spec.
-
Interactive communications using RS232.
-
Of RS232 standards, three signals RxD(No.2), TxD(No.3) and GND(No.5) are used →
Refer to Figure 1
-
Limit the distance between devices to less than 4m.
- Currently, out of 9 PIN RS232 terminal, PINS in use are numbers 2, 3 and 5.
- ID should show hexadecimal value of assigned ID, but ID 0 should be 0xFF.
- Every communication will be made in hexadecimals and Checksum is the sum of all
remainings. If it exceeds two digits, for example, it is 11+FF+01+01=112, discard the
number in the first digit like below.
example) Power On & ID=0
Header Command
ID
0xAA
0x11
Header Command
0x11
→ 0xAA
Data Length
1
0xFF
Data 1
Check
Sum
Power
Data Length
1
Data 1
1
12
- If you want to control every mechanism connected with Serial Cable regardless of its
ID, set ID part to "0xFE" and send commands. At the time, each SET will follow
commands but it will not respond with ACK.
Table 2-1 RS232 Network spec
Bits Rate
9600 bps
Data Bits
8 bits
Parity
None
Stop Bits
1 bit
Flow Control
None
5
Figure 2-1
RS- 232 pin out DB- 9 pin used for Asynchronous Data
6
2) RJ45 Connection Spec.
-
Interactive communications using RJ45.
- Transmit the MDC protocol using TCP/IP Format. the protocol information is stored
in data area.
- The protocol information format is the same as RS232's.
example) Power On & ID=0
Data
Header Command
Data1
Length
ID
Checksum
0xAA
0x11
1
Power
TCP
UDP
IP
ICMP
ARP
RARP
Hardware Interface(Ethernet, PPP etc. )
→
Header
Command
0xAA
0x11
TCP
IP
0xFF
Data
Length
1
Data1
12
1
UDP
ICMP
ARP
Hardware Interface(Ethernet, PPP etc. )
RARP
- default ip : 192.168.0.10 PORT : 1515
The RJ45 plug has 8-Pins as below.
Table 2-2 RJ45 plug 8-Pins
-
RJ45 PIN#
1
2
3
4
5
6
7
8
Wire Color(T568A)
White/Green
Green
White/Orange
Blue
White/Blue
Orange
White/Brown
Brown
10Base-T Signal
100Base-TX Signal
Transmit+
TransmitReceive+
Unused
Unused
ReceiveUnused
Unused
1000Base-T Signal
BI_DA+
BI_DABI_DB+
BI_DC+
BI_DCBI_DBBI_DD+
BI_DD-
7
2. Commanding words
No
Command
Value Range
0x00
0x01
0x02
0x03
0x04
0x05
0x06
0x07
0x08
0x09
0x0B
0x0D
0x0E
0x0F
0x10
0x11
0x12
0x13
0x14
0x15
0x17
0x18
-
10
11
12
13
14
15
16
17
Status Control
Time Control
On Time Control
Off Time Control
Video Control
Audio Control
RGB Control
PIP Status Control
Maintenance Control
Sound Control
Serial Number Control
Display Status Control
Software Version Control
Auto Motion Plus
Model Number Control
Power Control
Volume Control
Mute Control
Input Source Control
Picture sizes Control
Direct Channel Control
Screen Mode Control
18
Screen Size Control
0x19
0 ~ 255
19
Red Offset Control
Green Offset Control
Blue Offset Control
MDC Connection Type
Image Retention Free
Contrast Control
Brightness Control
0x1A
0x1B
0x1C
0x1D
0x1E
0x24
0x25
0 ~ 100
0 ~ 100
0 ~ 100
0~1
0~1
0 ~ 100
0 ~ 100
1
2
3
4
5
6
7
8
9
20
21
Command Type
-
0~1
0 ~ 100
0~1
-
8
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
Sharpness Control
Color Control
Tint Control
Red Gain Control
Green Gain Control
Blue Gain Control
Treble Control
Bass Control
Coarse Control
Fine Control
H-Position Control
V-Position Control
Auto Power Control
Clear Menu Control
Remote Control
RGB Contrast Control
RGB Brightness Control
PIP On/Off Control
Auto Adjustment Control
Color Tone Control
Color Temperature Control
PIP Source Control
Main-PIP Swap Control
PIP Size Control
PIP Locate Control
Fan Speed Setting
User Auto Color Control
Sound Select Control
Auto Volume
Standby Control
Video Picture Position & Size
Pixel Shift Control
Video Wall Control
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2F
0x30
0x31
0x32
0x33
0x34
0x36
0x37
0x38
0x3C
0x3D
0x3E
0x3F
0x40
0x41
0x42
0x43
0x44
0x45
0x47
0x48
0x4A
0x4B
0x4C
0x4F
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0~1
0~1
0~1
0~1
0~1
0
0~1
0 ~ 100
0 ~ 100
0~1
0
0~4
0 ~ 10
-
0~1
-
0~4
0 ~ 100
0~1
0~1
-
0~2
-
9
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
EQ 100Hz Control
EQ 300Hz Control
EQ 1kHz Control
EQ 3kHz Control
EQ 10kHz Control
Auto Lamp Control
Manual Lamp Control
Safety Screen Run Control
Safety Screen Control
Video Wall Mode Control
Safety Lock
Button Lock (Panel Lock)
Channel up/down
OSD On/OFF
P. Mode Control
S. Mode Control
NR Mode Set
PC Color Tone Control
Auto AutoAdjustment Enable/Disable
All Keys Lock
SRS TSXT Control
Film Mode
Signal Balance
69
70
71
72
73
74
SB Gain
SB Red Gain
SB Green Gain
SB Blue Gain
SB Sharpness
Panel On Time
Video Wall On
Temperature Control
Brightness Sensor
Dynamic Contrast
Safety Screen On
Video Wall User Control
0x51
0x52
0x53
0x54
0x55
0x57
0x58
0x59
0x5B
0x5C
0x5D
0x5F
0x61
0x70
0x71
0x72
0x73
0x75
0x76
0x77
0x78
0x79
0x7A
0x7E
0x7B
0x7C
0x7D
0x7F
0x83
0x84
0x85
0x86
0x87
0x88
0x89
-
0 ~ 100
0~6
0~1
0~1
0~1
0~1
0~4
0~1
0~3
0~1
0~1
0~1
0~1
0~1
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
0 ~ 100
-
0~1
0 ~ 125
0~1
0~1
1 ~5
-
10
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
Model Name
Fan Control(Manual/Auto)
Energy Saving
HDMI Black Level Control
Gamma Control
Edge Enhancement
Color Space
xvYCC
Reset Control
Ambient Brightness Sensor
RJ45 setting refresh
OSD Type Display Control
Timer1 Control
Timer2 Control
Timer3 Control
Clock Control
Holiday Add/Delete Control
Holiday Get Control
Panel On/Off
0x8A
0x8F
0x92
0x94
0x96
0x9C
0x9D
0x9E
0x9F
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xF9
0 ~ 1
0 ~ 1
0 ~ 1
0 ~ 3
0~1
0~1
0~1
0 ~ 3
1
-
0~1
"-" indicates multiple setting items-refer to "2.1. Command Detailed Explanation" for more
details.
11
2. 1. Command Detailed Explanation
* Status Control
●
Function
Personal Computer shows current setting condition of TV / Monitor.
●
Get Status
Header Command
0xAA
0x00
●
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ID
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
9
'A'
r-CMD
0x00
Val 1
Power
Val 2
Volume
Val 5
Val 6
Val 7
Check
Sum
Mute
Input
Aspect N Time NF F Time NF
Power : Power code to be set on TV / Monitor
Volume : Volume value code ( 0 ~ 100 ) to be set on TV / Monitor
Mute : Mute code to be set on TV / Monitor
Input : Input Source code to be set on TV/Monitor
Aspect : Image Size code to be set on TV/Monitor
N Time NF : OnTime ON/OFF value of time to set TV/Monitor(old type Timer)
F Time NF : OffTime ON/OFF value of time to set TV/Monitor(old type Timer)
→ It was supported for old type Timer. Now, It is always 0x00.
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
0
Check Sum Error
1
etc.
r-CMD
0x00
Val 1
ERR
Check
Sum
12
* Video Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer shows the screen condition of TV / Monitor.
●
Get Video Status
Header Command
0xAA
0x04
●
Ack
Header Command
0xAA
0xFF
Val 3
Sharpness
Val 4
Color
ID
ID
Val 5
Tint
Data Length
0
Check
Sum
Data Length Ack/Nak
0x0A
'A'
Val 6
Val 7
r-CMD
0x04
ColorTone ColorTemp
Val 8
0
Val 1
Contrast Brightness
Check
Sum
Contrast, Brightness, Sharpness, Color, Tint, ColorTone, ColorTemp
Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x04
Val 2
:
Val 1
ERR
Check
Sum
13
* Audio Control
●
Function
Personal Computer shows the sounds condition of TV / Monitor.
●
Get Audio Status
Header Command
0xAA
0x05
●
Ack
Header Command
0xAA
0xFF
Val 3
Balance
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
0x05
'A'
r-CMD
0x05
Val 1
Val 2
Val 1
Check
Sum
Treble
Bass
Check
Sum
Treble, Bass, Balance
●
ID
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x05
ERR
14
* RGB Control (PC, BNC, DVI Only)
●
Function
Personal Computer shows screen condition of TV / Monitor.
●
Get Video Status
Header Command
0xAA
0x06
●
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ColorTone ColorTemp
ID
ID
Val 5
0
Data Length
0
Check
Sum
Data Length Ack/Nak
0x0A
'A'
Val 6
Val 7
r-CMD
0x06
Val 1
Contrast Brightness
Val 8
Red Gain Green Gain Blue Gain
Contrast, Brightness, ColorTone, ColorTemp,
ColorTemp, Red, Green, Blue
Val 2
Check
Sum
: Same as above
※ If LFD model doesn't support RGB Gain, those values should be replied with 0xFF.
If then MDC application can ignore these values.
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x06
Val 1
ERR
Check
Sum
15
* PIP Status Control
●
Function
The PC displays the PIP settings of a TV or monitor.
●
Get the PIP Status
Header Command
0xAA
0x07
●
Ack
Header Command
0xAA
0xFF
Val 3
0
Val 4
0
ID
ID
Data Length
0
Checksum
Data Length Ack/Nak
6
'A'
r-CMD
0x07
Val 1
Val 2
P.Size
P.Source
Val 1
Checksu
m
Checksu
m
P.Size:
The PIP size code set for the TV or monitor.
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1(Double Window)
0x05
Double 2(Double Wide)
0x09
Double 3(POP)
P.Source: The PIP source code set for the TV or monitor.
●
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
3
'N'
0x07
ERR: The error code indicating which error occurred.
ERR
16
* Maintenance Control
●
Function
Personal Computer shows maintenance state of TV / Monitor.
Get Maintenance Status
Header Command
ID
0xAA
0x08
● Ack
Header Command
ID
0xAA
0xFF
●
Val 3
Val 4
P.Source LMax_H
Val 11
Val 5
0
Check
Sum
Data Length Ack/Nak
0x15
'A'
Val 6
Val 7
LMax_M LMax_AP LMaxValue
Val 12
Val 13
LMinValue
LampValue
ScreenInterval
Val17
Val 18
Val19
V.WallFormat V.WallDivid
●
Data Length
V.WallSet
Val 14
r-CMD
0x08
Val 1
Power
Val 8
LMin_H
ScreenTime
Val 9
LMin_M
Val 15
ScreenType
Val 2
P.Size
Val 10
LMin_AP
Val 16
V.Wall
Check
Sum
Power : Power code set on TV / Monitor
P.Size : P.Size value code set on TV / Monitor
P.Source : Source value code set on TV / Monitor
LMax_H : Auto Lamp Max Time Hour (1 ~ 12) set on TV / Monitor
LMax_M : Auto Lamp Max Time Minute (0 ~ 59) set on TV / Monitor
LMax_AP : Auto Lamp Max Time AM/PM set on TV / Monitor
LMaxValue : Auto Lamp Max value (0 ~ 100) set on TV / Monitor
LMin_H : Auto Lamp Min Time Hour (1 ~ 12) set on TV / Monitor
LMin_M : Auto Lamp Min Time Minute (0 ~ 59) set on TV / Monitor
LMin_AP : Auto Lamp Min Time AM/PM set on TV / Monitor
LMinValue : Auto Lamp Min value (0 ~ 100, 0xFF) set on TV / Monitor
LampValue : Manual Lamp Control value (0 ~ 100, 0xFF) set on TV / Monitor
ScreenInterval : Safety Screen Interval (Per Hour, 0(0ff)~10) set on TV / Monitor
ScreenTime : Safety Screen Time (Per Second, 0(off) ~5) set on TV / Monitor
ScreenType : Safety Screen Type (3 ~ 6) set on TV / Monitor
V.Wall : Video Wall Mode code set on TV / Monitor
V.WallFormat : Video Wall Format code set on TV / Monitor
V.WallDivid : Video Wall Divider code set on TV / Monitor
V.WallSet : Video f Set Number code set on TV / Monitor
Caution : If LMinValue is Returned to 0xFF then Auto Lamp Control is OFF.
If LampValue is Returned to 0xFF then Manual Lamp Control is OFF.
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x08
Val 1
ERR
Check
Sum
17
Sound Control
●
기능
Personal Computer가 TV / Monitor의 음향 상태를 보여준다.
●
Get Audio Status
Header Command
0xAA
0x09
●
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
100Hz
300Hz
Val 11
Check
Sum
SRS
ID
ID
Val 5
1kHz
Data Length
0
Check
Sum
Data Length Ack/Nak
0x0D
'A'
r-CMD
0x09
Val 6
Val 7
Val 8
3kHz
10kHz
Vol, Balance : 상동
100Hz, 300Hz, 1kHz, 3kHz, 10kHz : TV / Monitor에
SRS : TV / Monitor에 설정된 SRS TSXT On/Off 값
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
0
Val 1
Vol
Balance
Val 9
Val 10
0
Val 2
0
설정된 Equalizer의 주파수별 값
r-CMD
0x09
Val 1
ERR
Check
Sum
18
* Serial Number Control
●
Function
Personal Computer controls serial number of TV / Monitor.
●
Get SerialNum Status
Header Command
0xAA
0x0B
●
Data Length
ID
0
Ack SerialNum
Header Command
0xAA
0xFF
Val 3
Data3
Val 11
Val 4
Data4
ID
Val 5
Data5
Val 12
Data Length Ack/Nak
0x14
x14
Val 6
Data6
Val 13
r-CMD
0x0B
'A'
Val 7
Data7
Data14
Val 11
Val 12
Val 13
Val 14
Data1 ~ Data14 : Serial Number
Data15
Data15 ~ Data18
Data18 : Reserved
Val 9
Data9
Val 2
Data2
Val 10
Data10
Val 14
Data13
Data17
Data17
Data1
Data8
Data12
Data16
Data16
Val 1
Val 8
Data11
Data15
Data15
●
Check
Sum
Data18
Data18
Check
Sum
set on TV / Monitor.
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x0B
Val 1
ERR
Check
Sum
19
* Display Status Control
●
Function
Personal Computer shows display condition of TV / Monitor.
●
Get Maintenance Status
Header Command
0xAA
0x0D
●
Ack
Header Command
0xAA
0xFF
Val 3
Bright_Sensor
ID
ID
Val 4
No_Sync
Lamp : Lamp Error code (0
Temperature : Temperature
Monitor
Bright_Sensor
TV/Monitor
Data Length
0
Check
Sum
Data Length Ack/Nak
0x08
Val 5
Cur_Temp
'A'
r-CMD
0x0D
Val 6
Val 1
Val 2
Lamp Temperature
Check
Sum
FAN
: Normal, 1 : Error) to be set on TV / Monitor
Error code (0: Normal, 1: Error) to be set on TV /
: Brighte Sensor Error code (0: Normal, 1: Error) to be set on
: Brighte Sensor Error code (0: NONE,
NONE, 1: Error,
Error, 2: NORMAL)
NORMAL) to be
set on TV/Monitor
Bright_Sensor
●
No_Sync: Sync Error code(0: Normal, 1: Error, No Sync)
Cur_Temp : Current temperature of TV / Monitor
FAN : Fan Error code (0 : Normal, 1 : Error) to be set
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
to be set on TV / Monitor
on TV / Monitor
r-CMD
0x0D
Val 1
ERR
Check
Sum
20
* SW Version Control
●
Function
Personal Computer shows version information of TV / Monitor.
●
Get Version Status
Header Command
0xAA
0x0E
●
ID
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ID
Data Length
0
Data Length Ack/Nak r-CMD
0x14
x14
Val 5
Val 6
Version3 Version4 Version5 Version6
Val 11
Version11
Val 12
Version12
Val 17
Val 18
Version17
Version17
Version18
Version18
Check
Sum
Val 13
Version13
'A'
Val 7
0x0E
Val 8
Val 1
Val 2
Version1 Version2
Val 9
Val 10
Version7
Version8 Version9 Version10
Val 14
Val 15
Val 16
Version14 Version15 Version16
Version16
Check
Sum
Version1 ~ Version12
Version12 : Project Info. of TV/Monitor
Version13
Version13 ~ Version18
Version18 : Software version of TV/Monitor
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x06
Val 1
ERR
Check
Sum
21
Auto Motion Plus
●
Function
Personal Computer controls the Auto Motion Plus that TV / Monitor.
(It is dependent on Product Specifications- 120Hz Panel.)
●
Get Auto Motion Plus Status
Header Command
ID
0x0F
0xAA
●
Set Auto Motion Plus Status
Header Comman
d
ID
0x0F
0xAA
Data Length
0x00
Data
Length
0x03
Check
Sum
Data 1
Mode
Data 2
Data 3
Blur
Judder
Reductio Reductio
n
n
Check
Sum
Mode :
0x00
0x01
0x02
0x03
0x04
0x05
Blur reduction:
Off
Clear
Standard
Smooth
Custom
Demo
It is only for "Mode: Custom". If "Mode" is not custom, then it is "don't care".
0 ~ 10
Judder reduction:
It is only for "Mode: Custom". If "Mode" is not custom, then it is "don't care".
0 ~ 10
●
Ack
Header Comma
nd
0xAA
Mode
0xFF
ID
Data Ack/Na r-CMD Val 1
Length
k
0x05
'A'
0x0F
Val 2
Val 3
Blur Judder
Mode Reducti Reducti
on
on
Check
Sum
: Same as above
Blur Reduction, Judder Reduction :
For Set command Type, Data2 and Data3 is same with Set command.
For Get command Type, Date2 and Data2 is LFD's Value.(even If "Mode" is not
custom.)
22
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x0F
Val 1
ERR
Check
Sum
23
* Model Number Control
●
Function
Personal Computer shows Model Number of TV / Monitor.
●
Get Model Number Status
Header Command
ID
0xAA
0x10
●
Data Length
0
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x05
'A'
Species : TV / Monitor 's Panel Type.
0x01
PDP
0x02
LCD
0x03
DLP
Model : TV / Monitor's Model Number.
0x01
PPM50H2
0x02
PPM42S2
0x03
PS-42P2ST
0x04
PS-50P2HT
0x05
SyncMaster 400T
0x06
SyncMaster 403T
0x07
PPM42S3, SPD-42P3SM
0x08
PPM50H3, SPD-50P3HM
0x09
PPM63H3, SPD-63P3HM
0x0A
PS-42P3ST
0x0B
SyncMaster 323T
SyncMaster 403T 0x0C
CT40CS(N)
0x0D
PPMxxM5x
SyncMaster 320P(n)
0x0E
SyncMaster 400P(n)
SyncMaster 460P(n)
SyncMaster 320PX
0x10
SyncMaster 400PX(n)
SyncMaster 460PX(n)
0x13
SyncMaster 400TX(n)
0x14
SyncMaster 570DX
0x15
SyncMaster 320DX
Check
Sum
r-CMD Val 1 Val 2 Val 3 Check Sum
0x10 Species Model TV
0
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x20
0x21
0x22
0x23
0x24
SyncMaster 400DX(n)
SyncMaster 460DX(n)
SyncMaster 700DX(n)
SyncMaster 820DX(n)
SyncMaster 460TX(n)
SyncMaster 400UX(n)
SyncMaster
460UX(n)/460DR(n)
SyncMaster 42TS/42PS
SyncMaster P42HP
SyncMaster P50Hn
SyncMaster P50F(n)/P50FP
SyncMaster P63F(n)/P63FP
SyncMaster 320MX(n)
SyncMaster 400CX(n)
SyncMaster 400MX(n)
SyncMaster 400MP(n)
SyncMaster 460CX(n)
SyncMaster 460MP(n)
SyncMaster 520DX(n)
SyncMaster 400UXn-UD
SyncMaster 460UXn-UD
SyncMaster 400FX(n)
SyncMaster 460DRn-A
24
0x25
0x27
SyncMaster 460UTn-UD
SyncMaster 320MX(n)-2/MP
-2
SyncMaster 460MX(n)2/FP(n)-2
SyncMaster P50HP
SyncMaster P63FP
SyncMaster 400DXn-S
0x2A
0x31
SyncMaster 400CX(n)2/460CX(n)-2
0x32
0x33
SyncMaster 400UX(n)-2/
SyncMaster 460UX(n)-2
0x29
0x2B
0x2D
0x2F
0x26
0x28
0x2C
0x2E
0x30
SyncMaster 460UT(n)
SyncMaster 400MX(n)2/FP(n)-2
SyncMaster P42H-2
SyncMaster P50FP
SyncMaster 460Rn-S
SyncMaster 460DXn-S
SyncMaster 400DX(n)2/460DX(n)-2/700DX(n)2/820DX(n)-2
SyncMaster 650MP(n)
0x34
SyncMaster 700DRn
0x36
0x38
SyncMaster 460DMn
SyncMaster P50HP-2
0x35
0x37
SyncMaster 230TSn/230MXn
SyncMaster 400UXn-UD2/460UXn
0x39
SyncMaster P63FP-2
0x3A
400EXn
0x3B
460EXn
0x3C
550EXn
0x3D
SyncMaster 460UT(n)-2
0x3E
SyncMaster 550DX(n)
0x40
SyncMaster 520LD
0x44
UE46A / UE55A
ME40A / ME46A / ME55A
-UD2
SyncMaster 460CX(n)-3 /
0x3F
SyncMaster 400CX(n)-3 /
SyncMaster 460MX(n)-3 /
SyncMaster 400MX(n)-3 /
SyncMaster 320MX(n)-3
0x43
SyncMaster 460UT(n)-UD2
: TV / Monitor's TV support/not support.
0x00
TV not supported
0x01
TV supported
TV
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x10
Val 1
ERR
Check
Sum
25
* Power Control
●
Function
Personal Computer turns TV / Monitor power ON/OFF.
●
Get Power ON/OFF Status
Header Command
ID
0xAA
0x11
●
●
●
Data Length
0
Check
Sum
Set Power ON/OFF
Data Length Data 1
Header Command
ID
Power
0xAA
0x11
1
Power : Power code to be set on TV / Monitor
1
Power ON
0
Power OFF
Ack
Header Command
ID
0xAA
0xFF
Power : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x11
r-CMD
0x11
Val 1
Check
Sum
Val 1
Check
Sum
Power
ERR
26
* Volume Control
●
Function
Personal Computer changes volume of TV / Monitor.
●
Get Volume Status
Header Command
0xAA
0x12
ID
Data Length
0
Check
Sum
●
Set Volume
Data Length Data 1
Header Command
Check
ID
Sum
Volume
0xAA
0x12
1
Volume : Volume value code to be set on TV/Monitor (0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Volume : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x12
r-CMD
0x12
Val 1
Check
Sum
Val 1
Check
Sum
Volume
ERR
27
* Mute Control
●
Function
Personal Computer turns TV / Monitor mute ON/OFF.
●
Get Mute ON/OFF Status
Header Command
ID
0xAA
0x13
●
●
●
Data Length
0
Check
Sum
Set Mute ON/OFF
Data Length Data 1
Header Command
ID
Mute
0xAA
0x13
1
Mute : Mute code to be set on TV / Monitor
1
Mute ON
0
Mute OFF
Ack
Header Command
0xAA
0xFF
Mute : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x13
Val 1
Check
Sum
r-CMD
0x13
Val 1
Check
Sum
Mute
ERR
28
* Input Source Control
●
Function
Personal Computer changes input source of TV / Monitor.
●
Get Input Source Status
Header Command
0xAA
0x14
●
ID
Data Length
0
Check
Sum
Set Input Source
Data Length Data 1
Header Command
ID
0xAA
0x14
1
Input
Input : Input Source code to be set on TV / Monitor
0x14
PC
0x1E
BNC
0x18
DVI
0x0C
AV
0x04
S-Video
0x08
Component
0x20
Magicinfo
0x1F
DVI_VIDEO
0x30
RF(TV)
0x40
0x21
0x22
0x23
0x24
0x25
0x60
Caution
Check
Sum
TV (DTV)
HDMI1
HDMI1_PC
HDMI2
HDMI2_PC
DispalyPort
Magicinfo Lite
: DVI_
DVI_VIDEO, HDMI1_PC, HDMI2_PC → Get Only
In the case of Magicinfo,
Magicinfo, only possible with models include Magicinfo
Magicinfo.
info.
●
●
In the case of TV, only possible with models include TV.
Ack
Header Command
0xAA
0xFF
Input : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x14
Val 1
Check
Sum
r-CMD
0x14
Val 1
Check
Sum
Input
ERR
29
* Picture Size Control
●
Function
Personal Computer changes Picture Size of TV / Monitor.
Cannot control when Video Wall is on.
●
Get Picture Size Status
Header Command
0xAA
0x15
●
ID
Data Length
0
Check
Sum
Set Picture Size
Data Length Data 1
Header Command
Check
ID
Sum
Aspect
0xAA
0x15
1
Aspect : Picture Size code to be set on TV / Monitor
PC1, PC2, DVI,
DVI, BNC,HDMI_PC
0x10
0x18
16 : 9
4:3
0x00
0x01
0x04
0x05
0x06
Auto Wide
16 : 9
Zoom
Zoom1
Zoom2
AV, S-VIdeo,
Component,,DVI_Video,HDMI_Video
Component
0x09
0x31
0x0B
0x0C
0x0D
0x0E
0x0F
●
●
Just Scan(
Scan(Screen Fit)
Wide Zoom
4:3
Wide Fit
Custom
Smart View 1
Smart View 2
Caution :For some Image, Picture sizes are not supported depending on some
input signals (720p, 1080i).
For MFM model only possible for those include Europe TV if size is Auto Wide
Ack
Header Command
ID
0xAA
0xFF
Aspect : Same as above
Nak
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
r-CMD
0x15
Data Length Ack/Nak
r-CMD
0x15
3
3
'A'
'N'
Val 1
Check
Sum
Val 1
Check
Sum
Aspect
ERR
30
ERR
: Error code that shows what occurred error is
31
* Direct Channel Control (DTV)
Caution : Only works with models include TV.
● Function
Personal Computer can control TV Channel.
Get Channel
Header Command
0xAA
0x17
●
●
0
Check
Sum
Set Channel
Header Command
0xAA
Data 5
CH_NUM
(Low)
●
Data Length
ID
0x17
Data 6
Data 7
Val 4
ID
Reserved
Data 3
Data 4
0x0A Country ATV_DTV AirCable CH_NUM
(Hgh)
Data 8
Data 9
Data Length Ack/Nak
0x0C
Val 5
Val 6
CH_NUM
AirCable CH_NUM
(Hgh)
(Low)
Val 10
Data 2
Minor_CH Reserved
Sel_Minor Minor_CH
(Hgh)
(Low)
Ack
Header Command
0xAA
0xFF
Val 3
ID
Data
Length Data 1
Sel_Minor
'A'
Data 10
Reserved
r-CMD
0x17
Val 7
Val 1
Check
Sum
Val 2
Country ATV_DTV
Val 8
Val 9
Minor_CH Minor_CH Reserved
(Hgh)
(Low)
Check
Sum
Country : Select the country to be
ATV_DTV : Select Analog TV and
set on TV / Monitor (0 : Korea, 1: USA, .... )
DTV to be set on TV / Monitor ( 0 : Analog TV,
1: Digital TV)
AirCalbe : Select if TV is cabled or general ( 0 : general, 1: cabled)
CH_NUM : TV channel number to be set on TV / Monitor ( Analog TV : 1 ~ 135 ,
Digital TV : 0 ~ 999)
Sel_Minor : Select minor channel when DTV is to be set on TV / Monitor( 0 : minor
channel not selected. 1: minor channel selected.)
Minor_CH : Select minor channel number when DTV is to be set on TV / Monitor
( 0 ~ 999.)
●
Nak
Header Command
ID
Data Length Ack/Nak
r-CMD
Val 1
Check
32
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
0x17
ERR
Sum
33
* Screen Mode Control ( 4:3 Screeen Size)
●
Function
Personal Computer changes screen mode of TV
Cannot control when Video Wall is on and only operates when Picture Size is Auto
Wide.
Caution : Only works with models include TV.
●
Get Screen Mode Status
Header Command
ID
0xAA
0x18
Data Length
0
Check
Sum
●
Set Picture Size
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x18
1
ScrMode
ScrMode : Screen Mode Code to be set on TV / Monitor
0x01
16 : 9
0x04
Zoom
0x31
Wide Zoom
0x0B
4:3
●
Ack
Header Command
ID
0xAA
0xFF
ScrMode : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x18
r-CMD
0x18
Val 1
Check
Sum
Val 1
Check
Sum
ScrMode
ERR
34
* Screen Size Control
●
Function
Personal Computer recognizes the screen size of TV / Monitor.
●
Get Screen Size Status
Header Command
0xAA
0x19
●
Ack
Header Command
0xAA
0xFF
Screen Size
●
ID
ID
Data Length
0
Check
Sum
Data Length Ack/Nak
3
'A'
r-CMD
0x19
Val 1
Screen
Size
Check
Sum
: Screen size of TV / Monitor (Range: 0 ~ 255, Unit: Inch)
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x19
Val 1
ERR
Check
Sum
35
* Red Offset Control
●
Function
Personal Computer changes R Offset from Signal Control function of TV / Monitor.
※ Signal Control R Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control R Offset Status
Data Length
Header Command
ID
0xAA
0x1A
0
Check
Sum
●
Set Signal Control R Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1A
1
R Offset
R Offset : R Gain value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
R Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1A
r-CMD
0x1A
Val 1
Check
Sum
Val 1
Check
Sum
R Offset
ERR
36
* Green Offset Control
●
Function
Personal Computer changes G Offset from Signal Control function of TV / Monitor.
※ Signal Control G Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control G Offset Status
Data Length
Header Command
ID
0xAA
0x1B
0
Check
Sum
●
Set Signal Control G Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1B
1
G Offset
G Offset : G Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
G Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1B
r-CMD
0x1B
Val 1
Check
Sum
Val 1
Check
Sum
G Offset
ERR
37
* Blue Offset Control
●
Function
Personal Computer changes B Offset from Signal Control function of TV / Monitor.
※ Signal Control B Offset Control only operates when Signal Balance is on and
current input source is PC and BNC.
●
Get Signal Control B Offset Status
Data Length
Header Command
ID
0xAA
0x1C
0
Check
Sum
●
Set Signal Control B Offset
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x1C
1
B Offset
B Offset : B Offset value to be set on TV/Monitor (0 ~ 100)
●
Ack
Header Command
ID
0xAA
0xFF
B Offset : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1C
r-CMD
0x1C
Val 1
Check
Sum
Val 1
Check
Sum
B Offset
ERR
38
MDC Connection Type
●
Function
Personal Computer get MDC Connection Type of TV / Monitor.
(It is dependent on Product Specifications- RJ45 MDC Connection)
(It is Get Commnad Only.)
●
Get MDC Connection Status
Header Command
ID
0x1D
0xAA
●
Data Length
0x00
Check
Sum
Ack
Header Comman
d
0xAA
0xFF
ID
Data
Length
0x03
Ack/Nak r-CMD
'A'
0x1D
Val 1
Check
Sum
Connecti
on Type
Connection Type
0x00
0x01
●
RS232C MDC
RJ45 MDC
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x1D
Val 1
ERR
Check
Sum
39
Image Retention Free
●
Function
Personal Computer turns TV / Monitor Image Retention Free ON/OFF.
(It is dependent on Product Specifications.)
●
Get Image Retention Free Status
Data Length
Header Command
ID
0x1E
0xAA
0x00
●
Set
Status
Image Retention Free
Header Command
0xAA
0x1E
ID
Check
Sum
Data Length
Data 1
0x01
Image
Retention
Free
Check Sum
Image Retention Free
0x00
0x01
●
Ack
Header Command
0xAA
●
Off
On
0xFF
Data Length
ID
0x03
Ack/Nak r-CMD
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
0x1E
r-CMD
0x1E
Val 1
Image
Retention
Free
Val 1
ERR
Check
Sum
Check
Sum
40
* Contrast Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes contrast of TV / Monitor.
●
Get Contrast Status
Header Command
0xAA
0x24
ID
Data Length
0
Check
Sum
●
Set Contrast
Data Length Data 1
Header Command
Check
ID
Sum
Contrast
0xAA
0x24
1
Contrast : Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Contrast : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x24
r-CMD
0x24
Val 1
Check
Sum
Val 1
Check
Sum
Contrast
ERR
41
* Brightness Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes brightness of TV / Monitor.
●
Get Brightness Status
Header Command
0xAA
0x25
ID
Data Length
0
Check
Sum
●
Set Brightness
Data Length Data 1
Header Command
Check
ID
Sum
Brightness
0xAA
0x25
1
Brightness : Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x25 Brightness
Check
Sum
r-CMD
0x25
Check
Sum
Val 1
ERR
42
* Sharpness Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes sharpness of TV / Monitor의.
●
Get Sharpness Status
Header Command
0xAA
0x26
ID
Data Length
0
Check
Sum
●
Set Sharpness
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x26
1
Sharpness
Sharpness : Sharpness value code to be set on TV/Monitor ( 0 ~ 100 )
Caution : Sharpness could only be set in 50 Steps (0, 10, 20, 30... 100)
●
Ack
Header Command
ID
0xAA
0xFF
Sharpness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x26 Sharpness
Check
Sum
r-CMD
0x26
Check
Sum
Val 1
ERR
43
* Color Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes the color of TV / Monitor.
●
Get Color Status
Header Command
0xAA
0x27
ID
Data Length
0
Check
Sum
●
Set Color
Data Length Data 1
Header Command
Check
ID
Sum
Color
0xAA
0x27
1
Color : Color value code to be set on TV/Monitor( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Color : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x27
Val 1
Check
Sum
r-CMD
0x27
Val 1
Check
Sum
Color
ERR
44
* Tint Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes tint of TV / Monitor when visual display is NTSC.
Does not operate with PAL signals.
●
Get Tint Status
Header Command
0xAA
0x28
ID
Data Length
0
Check
Sum
●
Set Tint
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x28
1
Tint
Tint : Tint value code to be set on TV/Monitor (0 ~ 100 )
R
Tint Value
G
(100 - Tint) Value
●
Ack
Header Command
0xAA
0xFF
Tint : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x28
Val 1
Check
Sum
r-CMD
0x28
Val 1
Check
Sum
Tint
ERR
45
* Red Gain Control
●
Function
Personal Computer changes Red Gain of TV / Monitor.
●
Get Red Gain Status
Header Command
0xAA
0x29
ID
Data Length
0
Check
Sum
●
Set Red Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x29
1
Red
Red : Red Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Red : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x29
Val 1
Check
Sum
r-CMD
0x29
Val 1
Check
Sum
Red
ERR
46
* Green Gain Control
●
Function
Personal Computer changes Green Gain of TV / Monitor.
●
Get Green Gain Status
Header Command
0xAA
0x2A
ID
Data Length
0
Check
Sum
●
Set Green Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2A
1
Green
Green : Green Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Green : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2A
r-CMD
0x2A
Val 1
Check
Sum
Val 1
Check
Sum
Green
ERR
47
* Blue Gain Control
●
Function
Personal Computer changes Blue Gain of TV / Monitor.
●
Get Blue Gain Status
Header Command
0xAA
0x2B
ID
Data Length
0
Check
Sum
●
Set Blue Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2B
1
Blue
Blue : Blue Gain value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
0xAA
0xFF
Blue : Same as above
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2B
Val 1
Check
Sum
r-CMD
0x2B
Val 1
Check
Sum
Blue
ERR
48
* Treble Control
●
Function
Personal Computer changes Treble of TV / Monitor.
●
Get Treble Status
Header Command
0xAA
0x2C
ID
Data Length
0
Check
Sum
●
Set Treble
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2C
1
Treble
Treble : Treble value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Treble : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2C
r-CMD
0x2C
Val 1
Check
Sum
Val 1
Check
Sum
Treble
ERR
49
* Bass Control
●
Function
Personal Computer changes Bass of TV / Monitor.
●
Get Bass Status
Header Command
0xAA
0x2D
●
●
●
ID
Data Length
0
Check
Sum
Set Bass
Data Length Data 1
Header Command
ID
0xAA
0x2D
1
Bass
Bass : Bass value code ( 0 ~ 100 )
Check
Sum
Ack
Header Command
0xAA
0xFF
Bass : Same as above
r-CMD
0x2D
Val 1
Check
Sum
r-CMD
0x2D
Val 1
Check
Sum
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Bass
ERR
50
* Balance Control
●
Function
Personal Computer changes Balance of TV / Monitor.
●
Get Balance Status
Header Command
0xAA
0x2E
ID
Data Length
0
Check
Sum
●
Set Balance
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x2E
1
Balance
Balance : Balance value code to be set on TV/Monitor ( 0 ~ 100 )
L
(100 - Balance) Value
R
Balance Value
●
Ack
Header Command
ID
0xAA
0xFF
Balance : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2E
r-CMD
0x2E
Val 1
Check
Sum
Val 1
Check
Sum
Balance
ERR
51
* Coarse Control (PC, BNC Only)
●
Function
Personal Computer adjusts Coarse of TV / Monitor.
●
Get Coarse Status
None
●
Set Coarse
Data Length Data 1
Header Command
Check
ID
Sum
Coarse
0xAA
0x2F
1
Coarse : Coarse Increase/Decrease code to be set on TV/Monitor
1
Increase
0
Decrease
●
Ack
Header Command
ID
0xAA
0xFF
Coarse : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x2F
r-CMD
0x2F
Val 1
Check
Sum
Val 1
Check
Sum
Coarse
ERR
52
* Fine Control (PC, BNC Only)
●
Function
Personal Computer adjusts Fine of TV / Monitor.
●
Get Fine Status
None
●
Set Fine
Data Length Data 1
Header Command
ID
Fine
0xAA
0x30
1
Fine : Phase Increase/Decrease code
1
Increase
0
Decrease
●
●
Ack
Header Command
0xAA
0xFF
Fine : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x30
Val 1
Check
Sum
r-CMD
0x30
Val 1
Check
Sum
Fine
ERR
53
* H- Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Horizontal Position of TV / Monitor.
●
Get H-Position Status
None
●
Set H-Position
Data Length Data 1
Header Command
Check
ID
Sum
H-Pos
0xAA
0x31
1
H-Pos : H-Position Increase/Decrease code to be set on TV/Monitor
1
Move to Right
0
Move to Left
●
Ack
Header Command
ID
0xAA
0xFF
H-Pos : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x31
r-CMD
0x31
Val 1
Check
Sum
Val 1
Check
Sum
H-Pos
ERR
54
* V- Position Control (PC, BNC Only)
●
Function
Personal Computer adjusts Vertical Position of TV/Monitor.
●
Get V-Position Status
None
●
Set V-Position
Data Length Data 1
Header Command
Check
ID
Sum
V-Pos
0xAA
0x32
1
V-Pos : V-Position Increase/Decrease code to be set on TV/Monitor
1
Move Down
0
Move Up
●
Ack
Header Command
ID
0xAA
0xFF
V-Pos : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x32
r-CMD
0x32
Val 1
Check
Sum
Val 1
Check
Sum
V-Pos
ERR
55
* Auto Power Control
●
Function
Personal Computer adjusts Auto Power Control of TV/Monitor.
●
Get Auto Power
Header Command
0xAA
0x33
●
Set Auto Power
Header Command
0xAA
Auto Power
0x00
0x01
●
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
Auto
Power
Check
Sum
: The Auto Power Control code to set for the TV or monitor
Auto Power Off
Auto Power On
Ack
Header Command
0xAA
●
0x33
ID
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x33
Auto
Power
r-CMD
0x33
Val 1
ERR
Check
Sum
Check
Sum
56
* Clear Menu Control
●
Function
Personal Computer removes Menu OSD left in TV / Monitor.
●
Get Clear Menu Status
None
●
Set Clear Menu
Header Command
0xAA
0x34
Clear : 0x00 (Always)
●
●
Ack
Header Command
0xAA
0xFF
ID
ID
Data Length
1
Data 1
Clear
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x34
Val 1
Check
Sum
r-CMD
0x34
Val 1
Check
Sum
Clear
ERR
57
* Remote Control
Function
Personal Computer enables/disables IR receiving function of TV/Monitor/
Can operate regardless of whether power is ON/OFF
●
●
Get Remote Status
Header Command
0xAA
0x36
ID
Data Length
0
Check
Sum
Set Remote Enable/Disable
Data Length Data 1
Header Command
ID
RMC
0xAA
0x36
1
RMC : Power code to be set on TV/Remocon
1
Remocon Enable
0
Remocon Disable
●
Ack
Header Command
0xAA
0xFF
RMC : Same as above
Check
Sum
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x36
Val 1
Check
Sum
r-CMD
0x36
Val 1
Check
Sum
RMC
●
ERR
58
* RGB Contrast Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes contrast of TV / Monitor when Input Source is PC.
●
Get Contrast Status
Header Command
0xAA
0x37
ID
Data Length
0
Check
Sum
●
Set Contrast
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x37
1
Contrast
Contrast : RGB Contrast value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Contrast : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x37
r-CMD
0x37
Val 1
Check
Sum
Val 1
Check
Sum
Contrast
ERR
59
* RGB Brightness Control (PC, BNC, DVI Only)
●
Function
Personal Computer changes Brightness when Input Source of TV / Monitor is PC.
●
Get Brightness Status
Header Command
0xAA
0x38
ID
Data Length
0
Check
Sum
●
Set Brightness
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x38
1
Brightness
Brightness : RGB Brightness value code to be set on TV/Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x38 Brightness
Check
Sum
r-CMD
0x38
Check
Sum
Val 1
ERR
60
* PIP On / Off Control
●
Function
The PC turns the PIP function of a TV or monitor on/off.
This does not operate in MagicInfo mode.
●
Get the PIP ON/OFF Status
Header Command
ID
0xAA
0x3C
Data Length Checksu
0
m
●
Set the PIP ON/OFF
Data Length Data 1 Checksu
Header Command
ID
m
0xAA
0x3C
1
PIP
PIP: The PIP On/Off code to set for the TV or monitor.
1
PIP ON
0
PIP OFF
●
Ack
Header Command
0xAA
0xFF
PIP: Same as above.
●
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x3C
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
3
'N'
0x3C
ERR: The error code indicating which error occurred.
Val 1
Checksu
m
Val 1
Checksu
m
PIP
ERR
61
* Auto Adjustment Control (PC, BNC Only)
●
Function
Personal Computer controls PC system screen automatically.
●
Get Auto Adjustment Status
None
●
Set Auto Adjustment
Header Command
0xAA
0x3D
Auto : 0x00 (Always)
●
●
Ack
Header Command
0xAA
0xFF
ID
ID
Data Length
1
Data 1
Auto
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x3D
Val 1
Check
Sum
r-CMD
0x3D
Val 1
Check
Sum
Auto
ERR
62
* Color Tone Control (ATV, DTV, AV, S- Video, Component, HDMI Only)
●
Function
Personal Computer changes Color Tone of TV / Monitor.
●
Get Color Tone Status
Header Command
0xAA
0x3E
ID
Data Length
0
Check
Sum
●
Set Color Tone
Data Length Data 1
Header Command
Check
ID
0xAA
0x3E
1
Color Tone Sum
Color Tone : Color Tone value code to be set on TV/Monitor ( 0 ~ 4 )
0x00
Cool 2
0x01
Cool 1(Cool)
0x02
Normal (Standard)
0x03
Warm 1
0x04
Warm 2
0x50
Off
●
Ack
Header Command
ID
0xAA
0xFF
Brightness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x3E Color Tone Sum
r-CMD
0x3E
Val 1
ERR
Check
Sum
63
* Color Temperature Control
●
Function
Personal Computer changes Color Temperature value of TV / Monitor.
Only operates when Color Tone is set to Off.
●
Get C_Temp Status
Header Command
0xAA
0x3F
ID
Data Length
0
Check
Sum
●
Set C_Temp
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x3F
1
C_Temp
C_Temp : Color Temperature value code to be set on TV/Monitor
3000K : 0xFE
4000K : 0xFF
5000K ~ 15000K : 0 ~ 10
●
Ack
Header Command
ID
0xAA
0xFF
C_Temp : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x3F
r-CMD
0x3F
Val 1
Check
Sum
Val 1
Check
Sum
C_Temp
ERR
64
* PIP Source Control
●
Function
The PC changes the PIP source of a TV or monitor.
This only operates for a TV or monitor where PIP is set to On.
This does not operate in MagicInfo mode.
●
Get the PIP Source Status
Header Command
ID
0xAA
0x40
Data Length Checksu
0
m
Set the PIP Source
Data Length Data 1 Checksu
Header Command
ID
m
0xAA
0x40
1
P.Source
P.Source: The input source code to set for the TV or monitor.
●
Caution : The PIP source swap may not function according to the main source.
Ack
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
3
'A'
0x40
P.Source: Same as above.
● Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
3
'N'
0x40
ERR: The error code indicating which error occurred.
●
Val 1
Checksu
m
Val 1
Checksu
m
P.Source
ERR
65
* Main- PIP Swap Control
●
Function
The PC swaps the main and PIP screens.
This does not operate in MagicInfo mode.
●
Get the Main-PIP Swap Status
N/A
●
Set the Main-PIP Swap
Header Command
0xAA
0x41
Swap: 0x00 (Always)
●
●
Ack
Header Command
0xAA
0xFF
ID
ID
Nak
Header Command
0xAA
ERR:
0xFF
ID
Data Length
1
Data 1
Swap
Checksu
m
Data Length Ack/Nak
r-CMD
0x41
Val 1
Data Length Ack/Nak
r-CMD
Val 1
0x41
ERR
3
3
'A'
'N'
Swap
Checksu
m
Checksu
m
The error code indicating which error occurred.
66
* PIP Size Control
●
Function
The PC changes the PIP size of a TV or monitor.
This does not operate in MagicInfo mode.
●
Get the PIP Size Status
Header Command
0xAA
●
0x42
Data Length
ID
Set the PIP Size
Header Command
0xAA
0x42
ID
0
Checksu
m
Data Length
Data 1
1
P.Size
Checksu
m
P.Size:
The PIP size code set for the TV or monitor.
0x00
PIP Off
0x06
Large
0x08
Small
0x04
Double 1(Doble Window)
0x05
Double 2(Double Wide)
0x09
Double 3(POP)
●
Ack
Header Command
0xAA
P.Size:
●
0xFF
Data Length Ack/Nak
ID
'A'
Val 1
0x42
P.Size
r-CMD
Val 1
0x42
ERR
Checksu
m
Same as above.
Nak
Header Command
0xAA
ERR:
3
r-CMD
0xFF
Data Length Ack/Nak
ID
3
'N'
Checksu
m
The error code indicating which error occurred.
67
* PIP Locate Control
●
Function
The PC adjusts the PIP position of a TV or monitor.
This does not operate in MagicInfo mode.
●
Get the PIP Locate Status
Header Command
ID
0xAA
0x43
●
Set the PIP Locate
Header Command
0xAA
P.Locate
0
1
2
3
4
●
ID
P.Locate:
ERR:
Check
Sum
Data Length
Data 1
1
P.Locate
Checksu
m
PIP Off(Get Only)
Upper Left
Upper Right
Lower Right
Lower Left
0xFF
Data Length Ack/Nak
ID
3
'A'
r-CMD
Val 1
0x43
P.Locate
r-CMD
Val 1
0x43
ERR
Checksu
m
Same as above
Nak
Header Command
0xAA
0
: The PIP Locate Increase/Decrease code to set for the TV or monitor.
Ack
Header Command
0xAA
●
0x43
Data Length
0xFF
Data Length Ack/Nak
ID
3
'N'
Checksu
m
The error code indicating which error occurred.
68
* Fan Speed Setting
●
Function
The PC adjusts the Fan Speed of a TV or monitor.
●
Get Fan Speed
Header Command
0xAA
0x44
●
Set Fan Speed
Header Command
0xAA
0x44
ID
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
FAN
Speed
Check
Sum
: The Fan Speed to set for the TV or monitor.
0 ~ 100
Fan Speed
FAN Speed
If you send "Set Fan speed", then "Fan Control" changed "Manual".
(refer "Fan Control" command (0x8F))
●
Ack
Header Command
0xAA
●
0xFF
ID
Data Length Ack/Nak
0x03
'A'
r-CMD
Val 1
0x44
FAN
Speed
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
0x03
'N'
0x44
ERR: The error code indicating which error occurred.
Val 1
ERR
Check
Sum
Check
Sum
69
* User Auto Color(PC,
BNC Only)
●
Function
The PC adjusts the User Auto Color Control of a TV or monitor.
●
Set User Auto Color
Header Command
0xAA
0x45
Auto Color Cmd
0x00
0x01
●
●
Data 1
0x01
AutoColor
Cmd
Check
Sum
: The Auto Color Cmd to set for the TV or monitor.
Reset
Auto Color
Ack
Header Command
0xAA
ID
Data Length
0xFF
ID
Data Length Ack/Nak
0x03
'A'
r-CMD
Val 1
0x45
AutoColor
Cmd
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
0x03
'N'
0x45
ERR: The error code indicating which error occurred.
Val 1
ERR
Check
Sum
Check
Sum
70
* Sound Select Control
●
Function
The PC changes the sound when the PIP of a TV or monitor is set to On.
●
Get the Sound Select
Header Command
0xAA
●
S.Select:
1
0
0x47
ID
S.Select:
ERR:
Checksu
m
Data Length
Data 1
1
S.Selct
0xFF
Data Length Ack/Nak
ID
Checksu
m
3
'A'
r-CMD
0x47
Val 1
Checksu
m
S.Select
Same as above.
Nak
Header Command
0xAA
0
The Sound Select code to set for the TV or monitor
Main
Sub
Ack
Header Command
0xAA
●
ID
Set the Sound Select
Header Command
0xAA
●
0x47
Data Length
0xFF
Data Length Ack/Nak
ID
3
'N'
r-CMD
Val 1
0x47
ERR
Checksu
m
The error code indicating which error occurred.
71
* Auto Volume Control
●
기능
Personal Computer가 TV / Monitor의 Auto Volume를 전환한다.
●
Get Auto Volume
Header Command
0xAA
0x48
●
ID
Data Length
0
Check
Sum
Set Auto Volume
Data Length Data 1
Header Command
ID
0xAA
0x48
1
A_VOL
A_VOL : TV / Monitor에 설정할 Auto Volume Code
2
Night
1
Normal(On)
0
OFF
●
Ack
Header Command
0xAA
0xFF
A_VOL : 상동
●
Check
Sum
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x48
Val 1
A_VOL
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x48
Val 1
ERR
Check
Sum
72
* Standby Control
●
Function
The PC adjusts the Standby Control of a TV or monitor.
It is work for PC/DVI/HDMI/DisplayPort.
●
Get Standby Setting
Header Command
0xAA
0x4A
●
Set Standby Setting
Header Command
0xAA
0x4A
Standby Setting
0x00
0x01
0x02
●
●
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
Standby
Setting
Check
Sum
: The Standyby Setting code to set for the TV or monitor
Off
On
Auto
Ack
Header Command
0xAA
ID
0xFF
ID
Data Length Ack/Nak
0x03
'A'
r-CMD
Val 1
0x4A
Standby
Setting
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
0x03
'N'
0x4A
ERR: The error code indicating which error occurred.
Val 1
ERR
Check
Sum
Check
Sum
73
* Video Picture Position & Size (Video Source Only)
●
Function
The PC adjusts the Picture Position & Size of a TV or monitor.
It is work for Video Mode(AV, Component, S-Video, DVI/HDMI-TV Timing).
And "Picture Size" is must be zoom1,zoom2, Screen Fit, Custom. Other Picture sizes
doesn't support this function.
(For detail, plase refer below table.)
Position
Size
Reset
Up Down Left Right Up Down Left Right
Zoom1
O
O
O
X
X
X
X
X
X
Zoom2
O
O
O
X
X
X
X
X
X
Screen Fit O
O
O
O
O
X
X
X
X
Custom
O
O
O
O
O
O
O
O
O
Zoom
O
O
O
X
X
X
X
X
X
●
Set Video Picture Position & Size
Data Length
Header Command
ID
0xAA
0x4B
0x02
Type CMD:
0x00
0x01
0x02
Data 1
Data 2
Type
CMD
Direction
CMD
Check
Sum
The Standyby Setting code to set for the TV or monitor
Reset
Position
Size
Direction CMD:
It is work for Type CMD Size or Position.
If "Type CMD" is Reset, then "Direction CMD" is not work.
0x00
Down
0x01
Up
0x02
Left
0x03
Right
●
Ack
Header Comma
nd
0xAA
0xFF
ID
Data
Length Ack/Nak
0x04
'A'
r-CMD
Val 1
Val 2
0x4B
Type
CMD
Direction
CMD
Check
Sum
74
●
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xAA
0xFF
0x03
'N'
0x4B
ERR: The error code indicating which error occurred.
Val 1
ERR
Check
Sum
75
* Pixel Shift Control
●
Function
Personal Computer controls Pixel Shift function of TV / Monitor.
●
Get Pixel Shift Status
Header Command
0xAA
0x4C
●
Set Pixel Shift
Header Command
0xAA
0x4C
ID
ID
Data Length
0
Check
Sum
Data Length
Data 1
0x04
Shift
Data 2
H.Dot
Data 3
V.Line
Data 4
S.Time
Check
Sum
Shift : Pixel Shift On/Off Code to be set on TV/Monitor
Caution : If Shift value is off, H.Dot, V.Line, S.Time values are ignored in TV /
Monitor.
1
0
ON
OFF
H.Dot : Horizontal Dot value code set on TV/Monitor (0 ~ 4)
V.Line : Vertical Line value code set on TV/Monitor (0 ~ 4)
S.Time : Shift Time value code set on TV/Monitor (1 ~ 4)
●
Ack
Header Command
0xAA
0xFF
Val 3
V.Line
Val 4
S.Time
0x06
'A'
r-CMD
0x4C
Val 1
Val 2
Shift
H.Dot
r-CMD
0x4C
Val 1
Check
Sum
Check
Sum
Shift, H.Dot, V.Line, S.Time
●
Data Length Ack/Nak
ID
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
ERR
76
Q 100Hz Control
●
기능
Personal Computer가 TV / Monitor의 Equalizer 중 100Hz 영역을 조정한다.
●
Get EQ 100Hz Status
Header Command
0xAA
0x51
ID
Data Length
0
Check
Sum
●
Set EQ 100Hz
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x51
1
100Hz
100Hz : TV / Monitor에 설정할 Equalizer 중 100Hz 영역값 (0~20)
●
Ack
Header Command
0xAA
0xFF
100Hz : 상동
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x51
r-CMD
0x51
Val 1
Check
Sum
Val 1
Check
Sum
100Hz
ERR
77
* EQ 300Hz Control
●
기능
Personal Computer가 TV / Monitor의 Equalizer 중 300Hz 영역을 조정한다.
●
Get EQ 300Hz Status
Header Command
0xAA
0x52
ID
Data Length
0
Check
Sum
●
Set EQ 300Hz
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x52
1
300Hz
300Hz : TV / Monitor에 설정할 Equalizer 중 300Hz 영역값 (0~20)
●
Ack
Header Command
0xAA
0xFF
300Hz : 상동
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x52
r-CMD
0x52
Val 1
Check
Sum
Val 1
Check
Sum
300Hz
ERR
78
* EQ 1kHz Control
●
기능
Personal Computer가 TV / Monitor의 Equalizer 중 1kHz 영역을 조정한다.
●
Get EQ 1kHz Status
Header Command
0xAA
0x53
ID
Data Length
0
Check
Sum
●
Set EQ 1kHz
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x53
1
1kHz
1kHz : TV / Monitor에 설정할 Equalizer 중 1kHz 영역값 (0~20)
●
Ack
Header Command
0xAA
0xFF
1kHz : 상동
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x53
Val 1
Check
Sum
r-CMD
0x53
Val 1
Check
Sum
1kHz
ERR
79
* EQ 3kHz Control
●
기능
Personal Computer가 TV / Monitor의 Equalizer 중 3kHz 영역을 조정한다.
●
Get EQ 3kHz Status
Header Command
0xAA
0x54
ID
Data Length
0
Check
Sum
●
Set EQ 3kHz
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x54
1
3kHz
3kHz : TV / Monitor에 설정할 Equalizer 중 3kHz 영역값 (0~20)
●
Ack
Header Command
0xAA
0xFF
3kHz : 상동
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x54
Val 1
Check
Sum
r-CMD
0x54
Val 1
Check
Sum
3kHz
ERR
80
* EQ 10kHz Control
●
기능
Personal Computer가 TV / Monitor의 Equalizer 중 10kHz 영역을 조정한다.
●
Get EQ 10kHz Status
Header Command
0xAA
0x55
ID
Data Length
0
Check
Sum
●
Set EQ 10kHz
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x55
1
10kHz
10kHz : TV / Monitor에 설정할 Equalizer 중 10kHz 영역값 (0~20)
●
Ack
Header Command
0xAA
0xFF
10kHz : 상동
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x55
r-CMD
0x55
Val 1
Check
Sum
Val 1
Check
Sum
10kHz
ERR
81
* Auto Lamp Control
●
Function
Personal Computer sets Auto Lamp Function of TV / Monitor.
When Manual Lamp Control is on, Auto Lamp Control will automatically turn off.
●
Get Auto Lamp
Header Command
0xAA
0x57
●
Set Auto Lamp
Header Command
0xAA
0x57
Data 5
LMin_H
●
Val 3
Check
Sum
Data Length Data 1
8
Data 7
LMin_M
Val 4
0
ID
Data 6
Ack
Header Command
0xAA
0xFF
Data Length
ID
LMin_AP
ID
Val 5
Data 2
Data 3
Data 4
Val 1
Val 2
LMax_H LMax_M LMax_AP LMaxValue
Data 8
LMinValue
Data Length Ack/Nak
Check
Sum
0x0A
'A'
r-CMD
0x57
Val 6
Val 7
Val 8
LMax_H
LMax_M
Check
Sum
LMax_AP LMaxValue LMin_H LMin_M LMin_AP LMinValue
LMax_H : Auto Lamp Max Time Hour set on TV/Monitor (1 ~ 12)
LMax_M : Auto Lamp Max Time Minute set on TV/Monitor (0 ~ 59)
LMax_AP : Auto Lamp Max Time set on TV/Monitor AM/PM
LMaxValue : Auto Lamp Max Value set on TV/Monitor (0 ~ 100)
LMin_H : Auto Lamp Min Time Hour set on TV/Monitor (1 ~ 12)
LMin_M : Auto Lamp Min Time Minute set on TV/Monitor (0 ~ 59)
LMin_AP : Auto Lamp Min Time set on TV/Monitor AM/PM
LMinValue : Auto Lamp Min Value set on TV/Monitor (0 ~ 100)
Caution: When LMinValue is Returned to 0xFF, Auto Lamp Control is off.
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x57
Val 1
ERR
Check
Sum
82
* Manual Lamp Control
●
Function
Personal Computer sets Manual Lamp Function of TV / Monitor.
When Auto Lamp Control is on, Manual Lamp Control will automatically turn off.
●
●
Get Manual Lamp Status
Header Command
ID
0xAA
0x58
Data Length
0
Check
Sum
Set Manual Lamp
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x58
1
LampValue
LampValue : Manual Lamp value to be set on TV/Monitor (0 ~ 100)
Ack
Data Length Ack/Nak r-CMD
Header Command
Val 1
Check
ID
0xAA
0xFF
3
'A'
0x58 LampValue Sum
LampValue : Same as above
Caution : When LampValue is Returned to 0xFF, Manual Lamp Control is off.
When Dynamic contrast is on, Manual Lamp Control does not operate.
● Nak
Data Length Ack/Nak r-CMD
Header Command
Val 1
Check
ID
Sum
0xAA
0xFF
3
'N'
0x58
ERR
ERR : Error code that shows what occurred error is
●
83
* Safety Screen Run Control
●
Function
Personal Computer will make Safety Screen function to operate immediately, not by
Timer operation.
●
Get Safety Screen Run Status
Header Command
ID
0xAA
0x59
●
Set
Data Length
Check
Sum
Data Length
Data 1
0
Safety Screen Run
Header Command
0xAA
0x59
ID
1
Safety
Screen
Type
Check
Sum
: Safety Screen Type to be set on TV/Monitor (1~7)
0x00
Off
0x01
Signal Pattern
0x02
All White
0x03
Scroll(Scrolling)
0x04
Bar
0x06
Eraser
0x07
Pixel
Caution : 1(0x01), 2(0x02) only works with PDP models
Safety Screen Type
●
Ack
Header Command
0xAA
0xFF
Safety Screen Type
●
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x59
Val 1
Safety
Screen
Type
Check
Sum
Val 1
Check
Sum
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x59
ERR
84
* SBP Timer Control
●
Function
Personal Computer sets Screen Burn Protection Timer of TV/Monitor.
●
Get SBP Timer Status
Header Command
0xAA
0x5B
●
ID
Data Length
0
Check
Sum
Set SBP Timer
Data Length Data 1 Data 2 Data 3
Header Command
ID
0xAA
0x5B
3
Timer T.Period T.Time
Timer : SBP Timer code to be set on TV/Monitor
0x03
Scroll
0x04
Pixel
0x05
Bar
0x06
Eraser
0x09
All White
0x0A
Pattern
Caution : 9(0x09), 10(0x0A) only works with PDP models
: SBP Timer Period value code to be set on TV/Monitor
(it is dependent on Timer.)
T.Time : SBP Timer Time value code set on TV/Monitor.
(it is dependent on Timer.)
Off : If T.Period is 0 or T.Time is 0, then this is off.
● Ack
Data Length Ack/Nak r-CMD
Header Command
Val 1
ID
0xAA
0xFF
5
'A'
0x5B
Timer
Check
Sum
T.Period
Val 3
T.Time
T.Period
Check
Sum
Timer, T.Period, T.Time
●
Val 2
: Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x5B
Val 1
ERR
Check
Sum
85
* Video Wall Mode Control
●
Function
Personal Computer converts Video Wall Mode of TV / Monitor when Video Wall is
ON.
Only works with TV/Monitor where Video Wall is on.
Does not operate in MagicNet.
●
Get Video Wall Mode
Header Command
0xAA
0x5C
ID
Data Length
0
Check
Sum
●
Set Video Wall Mode
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x5C
1
WallMode
WallMode : Video Wall Mode code to be set on TV/Monitor
1
Full
0
Natural
●
Ack
Header Command
ID
0xAA
0xFF
WallMode : same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x5C WallMode
Check
Sum
r-CMD
0x5C
Check
Sum
Val 1
ERR
86
* Safety Lock
Function
Personal Computer turns Safety Lock function of TV/Monitor On/Off.
Can operate regardless of whether power is on/off.
●
●
Get Safety Lock Status
Header Command
ID
0xAA
0x5D
Data Length
0
Check
Sum
Set Safety Lock Enable/Disable
Data Length Data 1
Header Command
ID
0xAA
0x5D
1
Lock
Lock : Lock code to be set on TV/Monitor
1
On
0
Off
●
Ack
Header Command
0xAA
0xFF
Lock : Same as above
Check
Sum
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x5D
Val 1
Check
Sum
r-CMD
0x5D
Val 1
Check
Sum
Lock
●
Lock
87
* Button Lock(Panel Lock)
●
Function
Personal Computer turns Panel function Key Lock of TV/Monitor On/OFF.
Can operate regardless of whether power is on/off.
●
Get Button Lock Status
Header Command
0xAA
0x5F
ID
Data Length
0
Check
Sum
●
Set
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
Button Lock : Same as above
●
Lock
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x5F
1
Button Lock
Button Lock : Panel Key Lock On/Off code to be set on TV/Monitor
1
Lock
0
Unlock
Button
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x5F Button Lock
r-CMD
0x5F
Val 1
ERR
Check
Sum
Check
Sum
88
* Channel Up/ Down
●
Function
Caution : Only works with models include TV.
Personal Computer can control TV Channel.
(If PIP is on and pip source is TV, it also should work.)
●
Set
TV Channel Up/ Down
Header Command
0xAA
ID
Data Length
Data 1
Channel
Up/Down
Check
Sum
0x61
1
Channel Up/Down: Channel UP or Down to be set on TV / Monitor (0~1)
0
Up
1
Down
●
Ack
Header Command
0xAA
ID
Data Length Ack/Nak
0xFF
3
Channel Up/Down : Same as above
●
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x61
Channel
Up/Down
r-CMD
0x61
Val 1
ERR
Check
Sum
Check
Sum
89
* OSD On/ Off
●
Function
Personal Computer turns OSD of TV / Monitor On/Off.
When OSD is on, OSD will be shown on screen
When OSD is off, OSD will not shown on screen at all
●
Get OSD Enable Status
Header Command
0xAA
0x70
●
●
●
ID
Data Length
0
Check
Sum
Set OSD Enable/Disable
Data Length Data 1
Header Command
ID
0xAA
0x70
1
OSD
OSD : OSD On/Off code to be set on TV/Monitor
1
OSD On
0
OSD Off
Ack
Header Command
0xAA
0xFF
OSD : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x70
Val 1
Check
Sum
r-CMD
0x70
Val 1
Check
Sum
OSD
ERR
90
* P.Mode Control
●
Function
Personal Computer changes Picture Mode of TV / Monitor.
●
Get PMode Status
Header Command
0xAA
0x71
ID
Data Length
0
Check
Sum
●
Set PMode
Data Length Data 1
Header Command
Check
ID
Sum
PMode
0xAA
0x71
1
PMode : Picture Mode code to be set on TV/Monitor
Source
Data
Mode
0x00
Dynamic
AV
0x01
Standard
S-Video
0x02
Movie
Component
0x03
Custom
HDCP
0x50
Off(Deleted)
( TV )
0x04
Natural
0x10
Entertain
PC
0x11
Internet
BNC
0x12
Text
DVI
0x13
Custom
0x14
Advertisement
DisplayPort
0x15
Information
( MagicNet )
0x50
Off(Deleted)
Caution : Dynamic Contrast will not operate in any other mode except Off mode.
●
Ack
Header Command
ID
0xAA
0xFF
PMode : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x71
r-CMD
0x71
Val 1
Check
Sum
Val 1
Check
Sum
PMode
ERR
91
* S.Mode Control ( SRS TheaterSound )
●
Function
Personal Computer changes Sound Mode of TV / Monitor.
●
Get SMode Status
Header Command
0xAA
0x72
●
●
●
ID
Data Length
0
Check
Sum
Set SMode
Data Length Data 1
Header Command
ID
SMode
0xAA
0x72
1
SMode : Sound Mode code to be set on TV/Monitor
Data
Mode
0x00
Standard
0x01
Music
0x02
Movie
0x03
Speech(Clear Voice)
0x04
Custom
0x05
Amplify
Ack
Header Command
ID
0xAA
0xFF
SMode : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
0x72
r-CMD
0x72
Val 1
Check
Sum
Val 1
Check
Sum
SMode
ERR
92
* NR Mode Set (Digital Noise Filter)
ATV, DTV, AV, S- Video, Component, HDMI Only
●
Function
Personal Computer changes Digital NR mode.
●
Get NR Mode Status
Header Command
0xAA
0x73
●
●
●
ID
Data Length
0
Check
Sum
Set NR Mode
Data Length Data 1
Header Command
ID
0xAA
0x73
1
NR Mode
NR Mode : NR Mode code to be set on TV/Monitor
5
NR Mode Auto Visualization
4
NR Mode Auto
3
NR Mode High
2
NR Mode Medium
1
NR Mode Low (On)
0
NR Mode Off
Ack
Header Command
ID
0xAA
0xFF
NR Mode : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
r-CMD
Val 1
0x73 NR Mode
Check
Sum
r-CMD
0x73
Check
Sum
Val 1
ERR
93
* PC Color Tone Control (PC, BNC, DVI Only)
●
Function
Personal Computer can change color tone of Monitor.
●
Get Color Tone Status
Header Command
0xAA
0x75
ID
Data Length
0
Check
Sum
●
Set Color Tone
Data Length
Header Command
Data 1
Check
ID
Sum
Color Tone
0xAA
0x75
1
Color Tone : Color Tone value code to set on TV/Monitor (0 ~ 3)
Source
Data
Mode
0x00
Custom
0x01
Cool
PC
DVI
0x02
Normal
BNC
0x03
Warm
0x50
Off
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
Color Tone : Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x75
r-CMD
0x75
Val 1
Color Tone
Val 1
ERR
Check
Sum
Check
Sum
94
* Auto AutoAdjustment Enable/ Disable
●
Function
Personal Computer can Enable/Disable Auto Adjustment function.
If this value is Disable. then Auto Adjustment is not work.
●
Get A.Adjustment Status
Header Command
0xAA
0x76
ID
Data Length
0
Check
Sum
●
Set A.Adjustment
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x76
1
A.Adjustment
A.Adjustment : Auto Auto Adjustment Enable/Disable Value Code to be set on
TV/Monitor
1
Enable
0
Disable
●
Ack
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'A'
A.Adjustment : Same as above
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x76
r-CMD
0x76
Val 1
Check
Sum
Val 1
Check
Sum
A.Adjustment
ERR
95
* All Keys Lock
●
Function
Personal Computer turns both REMOCON and Panel Key Lock function on/off.
Can operate regardless of whether power is on/off.
●
Get All Key Status
Header Command
0xAA
0x77
ID
Data Length
0
Check
Sum
●
Set All Key Lock/Unlock
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x77
1
All Key
All Key : Lock On/Off code of every Key to be set on TV/Monitor
1
Lock
0
Unlock
●
Ack
Header Command
ID
0xAA
0xFF
All Key : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x77
r-CMD
0x77
Val 1
All Key
Val 1
ERR
Check
Sum
Check
Sum
96
* SRS TS XT Control (SRS TS HD)
●
Function
Personal Computer turns SRS TS XT of TV / Monitor on/off.
Can only operate with TV/Monitor that has SRS TS XT function.
●
Get SRS TS XT Status
Header Command
0xAA
0x78
●
●
●
ID
Data Length
0
Check
Sum
Set SRS TSXT
Data Length
Header Command
Data 1
ID
0xAA
0x78
1
SRS
SRS : SRS TS XT code to be set on TV/Monitor
1
SRS ON
0
SRS OFF
Ack
Header Command
0xAA
0xFF
SRS : Same as above
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check Sum
r-CMD
0x78
Val 1
Check
Sum
r-CMD
0x78
Val 1
Check
Sum
SRS
ERR
97
*
Film Mode Control
●
Function
Personal Computer turns Film Mode of TV / Monitor on/off.
●
Get Film Mode Status
Header Command
0xAA
0x79
●
●
●
ID
Data Length
0
Check
Sum
Set Film Mode
Data Length
Header Command
Data 1
ID
0xAA
0x79
1
FMode
FMode : Film Mode code to be set on TV/Monitor
3
Fiml Cinema Smooth
2
Film Mode Auto2
1
Film Mode Auto1(ON)
0
Film Mode OFF
Ack
Header Command
ID
0xAA
0xFF
FMode : Same as above
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check Sum
r-CMD
0x79
r-CMD
0x79
Val 1
Check
Sum
Val 1
Check
Sum
FMode
ERR
98
* Signal Balance ( PC, BNC Only)
●
Function
Personal Computer turns Signal Balance of TV / Monitor ON/OFF.
●
Get Signal Balance Status
Header Command
ID
0xAA
0x7A
Data Length
0
Check
Sum
●
Set Signal Balance
Data Length
Header Command
Data 1
ID
Check Sum
0xAA
0x7A
1
SBalance
SBalance : Signal Balance code to be set on TV/Monitor
1
Signal Balance ON
0
Signal Balance OFF
●
Ack
Header Command
ID
0xAA
0xFF
SBalance : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x7A
r-CMD
0x7A
Val 1
Check
Sum
Val 1
Check
Sum
SBalance
ERR
99
* SB Red Gain ( PC, BNC Only)
●
Function
Personal Computer changes Red Gain value of Monitor Signal Balance.
●
Get SB Red Gain Status
Header Command
ID
0xAA
0x7B
Data Length
0
Check
Sum
●
Set SB Red Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x7B
1
SB R Gain
SB R Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB R Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x7B SB R Gain
Check
Sum
r-CMD
0x7B
Check
Sum
Val 1
ERR
100
* SB Green Gain( PC, BNC Only)
●
Function
Personal Computer changes Green Gain value of Monitor Signal Balance.
●
Get SB Green Gain Status
Header Command
ID
0xAA
0x7C
Data Length
0
Check
Sum
●
Set SB Green Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x7C
1
SB G Gain
SB G Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB G Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x7C SB G Gain Sum
r-CMD
0x7C
Val 1
ERR
Check
Sum
101
* SB Blue Gain( PC, BNC Only)
●
Function
Personal Computer changes Blue Gain value of Monitor Signal Balance.
●
Get SB Blue Gain Status
Header Command
ID
0xAA
0x7D
Data Length
0
Check
Sum
●
Set SB Blue Gain
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x7D
1
SB B Gain
SB G Gain : Phase B value code of Signal Balance to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SB B Gain : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x7B SB B Gain
Check
Sum
r-CMD
0x7C
Check
Sum
Val 1
ERR
102
* SB Sharpness ( PC, BNC Only)
●
Function
Personal Computer changes Sharpness value of Monitor Signal Balance.
●
Get SBSharpness Status
Header Command
ID
0xAA
0x7F
Data Length
0
Check
Sum
●
Set SBSharpness
Data Length
Header Command
Data 1
Check
ID
0xAA
0x7F
1
SBSharpness Sum
SBSharpness : Signal Balance Sharpness value code to be set on Monitor ( 0 ~ 100 )
●
Ack
Header Command
ID
0xAA
0xFF
SBSharpness : Same as above
●
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
Check
0x7F SBSharpness Sum
r-CMD
0x7F
Val 1
ERR
Check
Sum
103
* Panel On Time
●
Function
Personal Computer shows Panel On Time of TV / Monitor.
●
Get Panel On Time Status
Header Command
ID
0xAA
0x83
Data Length
Ack
Header Command
0xAA
0xFF
Data Length Ack/Nak
●
ID
0
0x05
Check
Sum
'A'
r-CMD Val 1
Val 2
0x83 PTime_ H PTime_L
Check
Sum
●
PTime_H :
PTime_L :
Nak
Panel On Time High.
Panel On Time Low.
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x83
Val 1
ERR
Check
Sum
104
* Video Wall On
●
Function
Personal Computer turns Video Wall of TV / Monitor ON/OFF.
Does not operate in MagicInfo source.
●
Get Video Wall On/Off Status
Header Command
ID
0xAA
0x84
●
●
●
Data Length
0
Check
Sum
Set Video Wall On/Off
Data Length
Header Command
Data 1
ID
0xAA
0x84
1
V.Wall_On
V.Wall_On : Video Wall Code to set on TV / Monitor
1
Video Wall ON
0
Video Wall OFF
Ack
Header Command
ID
0xAA
0xFF
V.Wall_On : Same as above
Data Length
3
Check Sum
Ack/Nak r-CMD
'A'
0x84
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x84
Val 1
V.Wall_On
Val 1
ERR
Check
Sum
Check
Sum
105
* Temperature Control
●
Function
Personal Computer sets the maximum value of TV / Monitor temperature.
Only supports models with Temperature notification function.
●
Get Temperature Status
Header Command
0xAA
0x85
ID
Data Length
0
Check
Sum
●
Set Temperature Status
Data Length
Header Command
Data 1
ID
Check Sum
0xAA
0x85
1
Temperature
Temperature : Temperature code to be set on TV/Monitor
Data
75 ~ 125(℃)
●
Ack
Data Length Ack/Nak r-CMD
Header Command
Val 1
ID
0xAA
0xFF
3
'A'
0x85 Temperature
Temperature : Same as above
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
Check
Sum
●
r-CMD
0x85
Val 1
ERR
106
*
Brightness Sensor
●
Function
Personal Computer turns Brightness Sensor of TV / Monitor on/off.
Only supports models with Brightness Sensor.
PDP Model is not available it.
●
Get Brightness Sensor ON/OFF Status
Data Length
Header Command
ID
0xAA
0x86
0
Check
Sum
●
Set Brightness Sensor ON/OFF
Data Length
Header Command
Data 1
Check
ID
Sum
0xAA
0x86
1
BR_Sensor
BR_Sensor : Brightness Sensor Code to be set on TV/Monitor
1
Brightness Sensor ON
0
Brightness Sensor OFF
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x86
r-CMD
0x86
Val 1
Check
Sum
BR_Sensor
Val 1
ERR
Check
Sum
107
*
Dynamic Contrast
●
Function
Personal Computer changes Dynamic Contrast of TV/Monitor.
(High/Medieum,Low (On) / Off)
PDP Model is not available it.
●
Get Dynamic Contrast ON/OFF Status
Data Length
Header Command
ID
0xAA
0x87
0
Check
Sum
●
Set Dynamic Contrast ON/OFF
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0x87
1
DY_Cont
DY_Cont : Dynamic Contrast code to be set on TV/Monitor
3
Dynamic Contrast High
2
Dynamic Contrast Medieum
1
Dynamic Contrast Low(ON)
0
Dynamic Contrast OFF
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x87
r-CMD
0x87
Val 1
DY_Cont
Val 1
ERR
Check
Sum
Check
Sum
108
* Video Wall User Control
●
Function
Personal Computer turns Video Wall function of TV / Monitor on/off.
Does not operate in MagicInfo mode.
Get Video Wall Status
Data Length Check
Header Command
ID
Sum
0xAA
0x89
0
● Set Video Wall
Data Length Data 1
Header Command
Data 2 Check
ID
0xAA
0x89
2
Wall_Div Wall_SNo Sum
Wall_Div : Video Wall Divider code set on TV/Monitor
(It is dependent on Product Specifications.)
- 5x5
Video Wall Model :
- 10x10 Video Wall Model :
●
V
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
OFF
OFF
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
0x00
1
0x11
0x12
0x13
0x14
0x15
0x16
0x17
0x18
0x19
0x1A
0x1B
0x1C
0x1D
0x1E
0x1F
2
0x21
0x22
0x23
0x24
0x25
0x26
0x27
0x28
0x29
0x2A
0x2B
0x2C
0x2D
0x2E
0x2F
3
0x31
0x32
0x33
0x34
0x35
0x36
0x37
0x38
0x39
0x3A
0x3B
0x3C
0x3D
0x3E
0x3F
4
0x41
0x42
0x43
0x44
0x45
0x46
0x47
0x48
0x49
0x4A
0x4B
0x4C
0x4D
0x4E
0x4F
5
0x51
0x52
0x53
0x54
0x55
0x56
0x57
0x58
0x59
0x5A
0x5B
0x5C
0x5D
0x5E
0x5F
6
0x61
0x62
0x63
0x64
0x65
0x66
0x67
0x68
0x69
0x6A
0x6B
0x6C
0x6D
0x6E
0x6F
7
0x71
0x72
0x73
0x74
0x75
0x76
0x77
0x78
0x79
0x7A
0x7B
0x7C
0x7D
0x7E
N/A
8
0x81
0x82
0x83
0x84
0x85
0x86
0x87
0x88
0x89
0x8A
0x8B
0x8C
N/A
N/A
N/A
9
0x91
0x92
0x93
0x94
0x95
0x96
0x97
0x98
0x99
0x9A
0x9B
N/A
N/A
N/A
N/A
H
109
10
0xA1
0xA2
0xA3
0xA4
0xA5
0xA6
0xA7
0xA8
0xA9
0xAA
N/A
N/A
N/A
N/A
N/A
11
0xB1
0xB2
0xB3
0xB4
0xB5
0xB6
0xB7
0xB8
0xB9
N/A
N/A
N/A
N/A
N/A
N/A
12
0xC1
0xC2
0xC3
0xC4
0xC5
0xC6
0xC7
0xC8
N/A
N/A
N/A
N/A
N/A
N/A
N/A
13
0xD1
0xD2
0xD3
0xD4
0xD5
0xD6
0xD7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
14
0xE1
0xE2
0xE3
0xE4
0xE5
0xE6
0xE7
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
15
0xF1
0xF2
0xF3
0xF4
0xF5
0xF6
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
N/A
: TV/Monitor Number code set on TV/Monitor
(It is dependent on Product Specifications.)
- 5x5
Video Wall Model : ( 1 ~ 25 )
Wall_SNo
Set Number
2
0x01
0x02
...
...
1
24
25
-
Data
0x18
0x19
10x10 Video Wall Model
Set Number
Data
2
0x01
0x02
...
...
1
99
100
: ( 1 ~ 100)
0x63
0x64
Ack
Data Length Ack/Nak r-CMD Val 1
Header Command
Val 2
ID
0xAA
0xFF
4
'A'
0x89 Wall_Div Wall_SNo
● Nak
Data Length Ack/Nak r-CMD
Header Command
Val 1
ID
0xAA
0xFF
3
'N'
0x89
ERR
ERR : Error code that shows what occurred error is
●
Check
Sum
Check
Sum
110
* Model Name Control
●
Function
Personal Computer grasps TV / Monitor Model Name and display.
●
Get Model Number Status
Header Command
ID
0xAA
0x8A
●
Data Length Check S
um
0
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
ID
Val 5
Data Length Ack/Nak r-CMD
Length
'A'
Val 6
Val 7
Val 1
0x8A
Val 2
M_Name1 M_Name2
Val 8
Val 9
Val 10
M_Name3 M_Name4 M_Name5 M_Name6 M_Name7 M_Name8 M_Name9 M_Name10
Val 11
Val 12
Val 13
M_Name11
M_Name12
M_Name13
Val 17
Val ...
M_Name17
M_Name...
Check
Sum
M_Name1 ~ M_Name.
M_Name...
Length : Length means
Val 14
M_Name14
Val 15
M_Name15
Val 16
M_Name16
: TV / Monitor's Model Name.
number of M_Name elements & Ack/Nak & r-CMD.
M_Name1
'S'
M_Name2
'y'
M_Name3
'n'
M_Name4
'c'
M_Name5
'M'
M_Name6
'a'
M_Name7
's'
M_Name8
't'
M_Name9
'e'
M_Name10
'r'
M_Name11
'4'
M_Name12
'0'
M_Name13
'0'
M_Name14
'D'
M_Name15
'X'
M_Name16
'n'
111
* Fan Control (Manual/Auto)
●
Function
The PC adjusts the Fan Control of a TV or monitor.
●
Get Fan Control Status
Header Command
0xAA
0x8F
●
Set Fan Control
Header Command
0xAA
0x8F
ID
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
FAN
Check
Sum
: Fan Control code to be set on TV/Monitor
0x00
Fan Control Manual
0x01
Fan Control Auto
FAN
●
●
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x8F
Val 1
r-CMD
0x8F
Val 1
FAN
ERR
Check
Sum
Check
Sum
112
* Energy Saving
●
Function
The PC adjusts the Energy Saving of a TV or monitor.
●
Get Energy Saving
Header Command
0xAA
0x92
●
Set Energy Saving
Header Command
0xAA
0x92
Energy Saving
0x00
0x01
0x02
0x03
0x04
●
●
ID
Data Length
Check
Sum
Data Length
Data 1
Energy
Saving
0x00
0x01
Check
Sum
: Energy Saving code to be set on TV/Monitor
Energy Saving Off
Energy Saving Low(On)
Energy Saving Medium
Energy Saving High
Energy Saving Picture Off
Ack
Header Command
0xAA
ID
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0x92
Energy
Saving
r-CMD
0x92
Val 1
ERR
Check
Sum
Check
Sum
113
* HDMI Black Level Control
●
Function
Personal Computer turns HDMI Black Level function of TV / Monitor.
●
Get HDMI Black Level Status
Header Command
ID
0xAA
0x94
Data Length
0x00
Check
Sum
Set HDMI Black Level
Header Command
0xAA
0x94
Data Length
Data 1
●
ID
0x01
HDMI_b
Check
Sum
: HDMI Black Level Control code set on TV/Monitor
0
Normal
1
Low
HDMI_b
●
●
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x94
r-CMD
0x94
Val 1
HDMI_b
Val 1
ERR
Check
Sum
Check
Sum
114
* Gamma Control
●
Function
The PC adjusts the Gamma Control of a TV or monitor.
●
Get Gamma Status
Header Command
0xAA
0x96
●
Set Gamma
Header Command
0xAA
0x96
GAMMA
0x00
0x01
0x02
0x03
0x11
0x12
0x13
0x20
●
●
ID
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
GAMMA
Check
Sum
: Gamma code to be set on TV/Monitor
Natural (0)
Mode1 (1)
Mode2 (2)
Mode3 (3)
-1
-2
-3
Custom
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x96
r-CMD
0x96
Val 1
GAMMA
Val 1
ERR
Check
Sum
Check
Sum
115
Edge Enhancement Control
●
기능
Personal Computer가 TV / Monitor의 Edge Enhancement를 변경한다.
●
Get Edge Enhancement Status
Header Command
0xAA
0x9C
●
ID
Data Length
0
Check
Sum
Set Edge Enhancement
Header Command
0xAA
0x9C
ID
Data Length
Data 1
1
EDGE
Check
Sum
: TV / Monitor에 설정할 Edge Enhancement Control 값
1
Edge Enhancement Control ON
0
Edge Enhancement Control OFF
EDGE
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x9C
Val 1
EDGE
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x9C
Val 1
ERR
Check
Sum
116
Color Space Control
●
기능
Personal Computer가 TV / Monitor의 Color Space를 변경한다.
●
Get Color Space Status
Header Command
0xAA
0x9D
●
COS
0
Check
Sum
ID
Data Length
Data 1
1
COS
Check
Sum
: TV / Monitor에 설정할 Color Space Control 값
2
Color Space Control Custom
1
Color Space Control Native
0
Color Space Control Auto
Ack
Header Command
0xAA
0xFF
●
Data Length
Set Color Space
Header Command
0xAA
0x9D
●
ID
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x9D
Val 1
r-CMD
0x9D
Val 1
COS
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
ERR
Check
Sum
117
xvYCC Control
●
기능
Personal Computer가 TV / Monitor의 xvYCC를 변경한다.
●
Get xvYCC Status
Header Command
0xAA
0x9E
●
ID
Data Length
0
Check
Sum
Set xvYCC
Header Command
0xAA
0x9E
ID
Data Length
Data 1
1
XVYCC
Check
Sum
: TV / Monitor에 설정할 xvYCC Control 값
1
xvYCC Control ON
0
xvYCC Control OFF
XVYCC
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
r-CMD
0x9E
Val 1
XVYCC
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : 발생된 오류가 무엇인지 나타내는 Error Code
r-CMD
0x9E
Val 1
ERR
Check
Sum
118
* Reset Control
●
Function
The PC adjusts the Reset Control of a TV or monitor.
●
Get Reset Status Not Available
Header Command
0xAA
0x9F
●
Set Reset
Header Command
0xAA
0x9F
ID
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
0x01
RST
Check
Sum
: Reset code to be set on TV/Monitor
0x00
Picture Reset
0x01
Sound Reset
0x02
Setup Reset
0x03
Reset All
RST
●
●
Ack
Header Command
0xAA
0xFF
ID
Data Length Ack/Nak
0x03
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0x9F
Val 1
r-CMD
0x9F
Val 1
RST
ERR
Check
Sum
Check
Sum
119
* Ambient Brightness Control
●
Function
The PC adjusts Ambient Brightness Mode On/Off of a TV or monitor.
And, Setting Lamp value for Ambient Brightness On.
●
Get Ambient Brightness
Header Command
0xAA
0xA1
●
Set
Mode
Data Length
ID
0x00
Check
Sum
Ambient Brightness Mode, and Set Lamp Value
Header Command
0xAA
AB_Mode:
ID
0xA1
Data
Length
0x03
Data 1
Data 2
Data 3
AB_Mode
Valid_
LampValu
e
Lamp
Value
Check
Sum
Ambient Mode On/Off code to be set on TV/Monitor
0x00
0x01
Ambient Brightness Mode Off
Ambient Brightness Mode On
Valid_LampValue
0x00
0x01
: Lamp Value Apply/Not apply to be set on TV/Monitor
Invalid Lamp Value(Don't apply)
Valid Lamp Value (Apply)
: Lamp Value to be set on TV/Monitor (0 ~ 100),
Lamp Value
●
Status
Ack
Header Command
0xAA
0xFF
ID
Data
Length
Ack/N
ak
rCMD
Val 1
Val 2
0x04
'A'
0xA1
AB_Mod
e
Lamp
Value
AB_Mode, Valid_LampValue,Lamp Value
Check
Sum
: Same as above
If This is for "Ambient Brightness Mode", then It is same below table.
●
Input Type
AB_Mode
Valid_
LampValue
Lamp Value
Get
Same as above
Same as AB_Mode
Same as above
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA1
Val 1
ERR
Check
Sum
120
* OSD Display Type On/ Off
●
Function
The PC adjusts the OSD Display Control of a TV or monitor.
"OSD On" means, It is display that OSD Type.
"OSD Off" means, It is not dispaly that OSD Type.
●
Get OSD Enable Status
Header Command
0xA3
0xAA
●
Set OSD Enable/Disable
Header Command
0xA3
0xAA
OSD Type:
Type:
0x00
0x01
0x02
0x03
0x00
0x01
ID
Data Length
0x00
Check
Sum
Data Length
Data 1
OSD
Type
0x02
Data 2
OSD
On/Off
Adjust OSD On/Off code to be set on TV/Monitor
OSD Off
OSD On
Ack
Header Comman
d
0xAA
BIT4
Check
Sum
Select OSD Type code to be set on TV/Monitor
Source OSD
Not Optimum Mode OSD
No Signal OSD
MDC OSD
OSD ON/OFF:
ON/OFF:
●
ID
0xFF
Val 1
BIT2
0x03
Ack/Nak r-CMD
'A'
BIT7
0xA3
Val 1
BIT6
BIT5
Reserved
BIT0 Check
Sum
Reserv Type 3 Type 2 Type 1 Type 0
ed
On/Off On/Off On/Off On/Off
Type(OSD Type) : Same as Above.
●
BIT3
ID
Data
Length
BIT1
Nak
Data Length Ack/Nak r-CMD
Header Command
ID
0xA3
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
Val 1
ERR
Check
Sum
121
* Timer1 Control
Function:
Personal Computer controls the Timer1 that TV / Monitor.
(It is dependent on Product Specifications.)
● Get Timer1 Status
Data Length Check
Header Command
ID
Sum
0xAA
0xA4
0
●
●
Set Timer1
Header
Command
0xAA
0xA4
ID
Data
Length
Data 1
Data 2
Data 3
Data 4
Data 5
0x0D
On H
On M
On
AM/PM
On_Act
Off H
Data Data Data 12 Data 13
10
11
Check
Manual
Sum
Off
Holiday
Off M AM/PM Off_Act Repeat Weekda Volume Source
Apply
y
On H : On Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
On M : On Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
On AM/PM :On Time AM/PM value to be set on TV/Monitor (0~1)
0x00
PM
0x01
AM
On_Act : On Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Data 6 Date 7 Data 8 Data 9
Off H : Off Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
Off M : Off Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor (0~1)
0x00
0x01
PM
AM
Off_Act : Off Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Repeat : Repeat value to be set on TV/Monitor (0~5)
0:Once 1:Everyday 2:Mon~Fri 3:Mon~Sat 4:Sat~Sun 5:Manual Weekday
ManualWeekday : Weekday value to be set on TV/Monitor.
BIT7
X
BIT6
Sat
BIT5
Fri
BIT4
Thu
BIT3
Wed
BIT2
Tue
BIT1
Mon
BIT0
Sun
BIT7 : Don't care
Volume : Volume to be set on TV/Monitor.
Source : Source to be set on TV/Monitor.
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor. (0~1)
0x00 Dont't Apply(Both)
0x01
Apply(Both)
122
0x02
0x03
●
On Timer1 only
Apply
Off Timer1 only
Apply
Ack
Header Comman
d
0xAA
0xFF
ID
Data
Length
0x0F
Ack/Nak r-CMD
'A'
0xA4
Val 1
Val 2
Val 3
On H
On
On M AM/PM
Val
Val
Val 7 Val 8 Val 9 Val 10 Val
11
12
13
Check
M
a
n
u
l
a
Off
On_A Off H Off M
Holiday Sum
ct
AM/PM Off_Act Repeat Weeykda Volume Source Apply
Val1 ~ Val13: Same as above
Val 4 Val 5 Val 6
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA4
Val 1
ERR
Check
Sum
123
* Timer2 Control
Function:
Personal Computer controls the Timer2 that TV / Monitor.
(It is dependent on Product Specifications.)
● Get Timer2 Status
Data Length Check
Header Command
ID
Sum
0xAA
0xA5
0
●
●
Set Timer2
Header
Command
0xAA
0xA5
ID
Data
Length
Data 1
Data 2
Data 3
Data 4
Data 5
0x0D
On H
On M
On
AM/PM
On_Act
Off H
Data Data Data 12 Data 13
10
11
Check
Manual
Sum
Off
Holiday
Off M AM/PM Off_Act Repeat Weekda Volume Source
Apply
y
On H : On Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
On M : On Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
On AM/PM :On Time AM/PM value to be set on TV/Monitor (0~1)
0x00
PM
0x01
AM
On_Act: On Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Data 6 Date 7 Data 8 Data 9
Off H : Off Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
Off M : Off Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor (0~1)
0x00
PM
0x01
AM
Off_Act : Off Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Repeat : Repeat value to be set on TV/Monitor (0~5)
0:Once 1:Everyday 2:Mon~Fri 3:Mon~Sat 4:Sat~Sun 5:Manual Weekday
ManualWeekday : Weekday value to be set on TV/Monitor.
BIT7
X
BIT6
Sat
BIT5
Fri
BIT4
Thu
BIT3
Wed
BIT2
Tue
BIT1
Mon
BIT0
Sun
BIT7 : Don't care
Volume : Volume to be set on TV/Monitor.
Source : Source to be set on TV/Monitor.
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor. (0~1)
0x00 Dont't Apply(Both)
0x01
Apply(Both)
124
0x02
0x03
●
Ack
On Timer2 only
Apply
Off Timer2 only
Apply
Header Comman
d
0xAA
0xFF
ID
Data
Length
0x0F
Ack/Nak r-CMD
'A'
0xA5
Val 1
Val 2
Val 3
On H
On
On M AM/PM
Val
Val
Val 7 Val 8 Val 9 Val 10 Val
11
12
13
Check
M
a
n
u
l
a
Off
On_A Off H Off M
Holiday Sum
ct
AM/PM Off_Act Repeat Weeykda Volume Source Apply
Val1 ~ Val13: Same as above
Val 4 Val 5 Val 6
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA5
Val 1
ERR
Check
Sum
125
* Timer3 Control
Function:
Personal Computer controls the Timer3 that TV / Monitor.
(It is dependent on Product Specifications.)
● Get Timer3 Status
Data Length Check
Header Command
ID
Sum
0xAA
0xA6
0
●
●
Set Timer3
Header
Command
0xAA
0xA6
ID
Data
Length
Data 1
Data 2
Data 3
Data 4
Data 5
0x0D
On H
On M
On
AM/PM
On_Act
Off H
Data Data Data 12 Data 13
10
11
Check
Manual
Sum
Off
Holiday
Off M AM/PM Off_Act Repeat Weekda Volume Source
Apply
y
On H : On Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
On M : On Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
On AM/PM :On Time AM/PM value to be set on TV/Monitor (0~1)
0x00
PM
0x01
AM
On_Act : On Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Data 6 Date 7 Data 8 Data 9
Off H : Off Time Hour value to be set on TV/Monitor ( 1 ~ 12 )
Off M : Off Time Minute value to be set on TV/Monitor ( 0 ~ 59 )
Off AM/PM : Off Time AM/PM value to be set on TV/Monitor (0~1)
0x00
PM
0x01
AM
Off_Act : Off Time Inactivated /Activated to be set on TV/Monitor (0(off)~1(on))
Repeat : Repeat value to be set on TV/Monitor (0~5)
0:Once 1:Everyday 2:Mon~Fri 3:Mon~Sat 4:Sat~Sun 5:Manual Weekday
ManualWeekday : Weekday value to be set on TV/Monitor.
BIT7
X
BIT6
Sat
BIT5
Fri
BIT4
Thu
BIT3
Wed
BIT2
Tue
BIT1
Mon
BIT0
Sun
BIT7 : Don't care
Volume : Volume to be set on TV/Monitor.
Source : Source to be set on TV/Monitor.
Holiday Apply : Holiday Apply/Don't Apply to be set on TV/Monitor. (0~1)
0x00 Dont't Apply(Both)
0x01
Apply(Both)
126
0x02
0x03
●
Ack
On Timer3 only
Apply
Off Timer3 only
Apply
Header Comman
d
0xAA
0xFF
ID
Data
Length
0x0F
Ack/Nak r-CMD
'A'
0xA6
Val 1
Val 2
Val 3
On H
On
On M AM/PM
Val
Val
Val 7 Val 8 Val 9 Val 10 Val
11
12
13
Check
M
a
n
u
l
a
Off
On_A Off H Off M
Holiday Sum
ct
AM/PM Off_Act Repeat Weeykda Volume Source Apply
Val1 ~ Val13: Same as above
Val 4 Val 5 Val 6
●
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA6
Val 1
ERR
Check
Sum
127
* Clock Control
Function
Personal Computer controls current time of TV / Monitor.
(It is dependent on Product Specifications.)
● Get Clock Status
Data Length Check
Header Command
ID
Sum
0xA7
0xAA
0x00
●
●
Set Clock
Header Command
0xA7
0xAA
ID
Data Length
0x07
Data 1
Day
Data 2
Hour
Data 3
Data 4
Val 1
Val 2
Val 1
Check
Sum
Minute
Month
Data 5 Data 6
Data 7
Check
Sum
Year1
Year2
AmPm
Day : Day value to be set on TV/Monitor ( 1 ~ 31 )
Month : Month value to be set on TV/Monitor ( 1 ~ 12 )
Year1 : Year value to be set on TV/Monitor (High Byte)
Year2 : Year value to be set on TV/Monitor (Low Byte)
ex) Current year is 2010.
2010(Dec) → 0x07DA(Hex)
Year1: 0x07
Year2: 0xDA
Hour : Hour value to be set on TV/Monitor ( 1 ~ 12 )
Minute : Minute value to be set on TV/Monitor ( 0 ~ 59 )
AmPm : AM/PM value to be set on TV/Monitor (0 ~ 1)
0x00
PM
0x01
AM
●
Ack
Header Command
0xAA
0xFF
Val 3
ID
Data Length Ack/Nak
0x09
'A'
r-CMD
0xA7
Day
Hour
Val 5
Val 6
Val 7
Check
Sum
Year1
Year2
AmPm
Minute
Month
Hour, Minute : Same as above
Note : Hour,
our, Minute if current time was not set on Monitor, 0xFF
●
Val 4
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA7
ERR
128
* Holiday Add/ Delete Control
Function
Personal Computer controls Holiday List of TV / Monitor.
(It is dependent on Product Specifications.)
● Set Holiday Status
●
Header Command
0xAA
0xA8
Data 5
Day_E
Check
Sum
ID
Data
Length
0x05
Data 1
Data 2
Manageme
nt
Month_S
command
Data 3
Data 4
Day_S
Month_E
Adjust Command Holiday List of TV / Monitor.
Add Holiday
Delete Holiday
Delete All
Management Command:
Command:
0x00
0x01
0x02
Add Holiday : Add New Holiday Information "Month_S/Day_S ~ Month_E/Day_E".
Delete Holiday : Delete one Holiday Information "Month_S/Day_S ~ Month_E/Day_E".
Delete All : Delete All Holiday Information.("Data2 ~ Data5" must be 0x00.)
●
Ack
Header Command
0xAA
0xFF
Val 3
Val 4
Day_S
●
Month_E
ID
Val 5
Day_E
Data Length Ack/Nak
0x07
'A'
r-CMD
0xA8
Val 1
Val 2
Val 1
Check
Sum
Managem
ent
Month_S
command
Check
Sum
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA8
ERR
129
* Holiday Get Control
Function
Personal Computer get Holiday List of TV / Monitor.
(It is dependent on Product Specifications.)
● Get Total Number of Holiday
Request Total number of Holiday information of TV/Monitor.
Data Length Check
Header Command
ID
Sum
0xA9
0xAA
0x00
●
●
●
Get Holiday Date
Data Length Data 1
Header Command
ID
0xAA
0xA9
0x01
Index
Index : Index value on Holiday List.
Check
Sum
Ack
Header Command
0xAA
0xFF
r-CMD
Val 3
Day_S
Val 4
Month_E
ID
Val 5
Day_E
Data Length Ack/Nak
0x07
'A'
0xA9
Val 1
Index
Month_S
Check
Sum
Rule of Ack Command.
Command Index(Ac
Month_S(Ack) Day_S(Ack) Month_E(Ack)
Type
k)
Get Number Total
0x00
0x00
0x00
of Holiday
number
Get Holiday
Date
Month_S
Day_S
Month_E
(If there is
Index
(Index's data) (Index's data) (Index's data)
holiday
information)
Get Holiday
Date
(If there is
Index
0xFF
0xFF
0xFF
no holiday
information)
●
Val 2
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
0x03
'N'
ERR : Error code that shows what occurred error is
r-CMD
0xA9
Val 1
ERR
Day_E(Ack)
0x00
Day_E
(Index's
data)
0xFF
Check
Sum
130
*
Panel On/Off
●
Function
Personal Computer turns Panel of TV / Monitor on/off.
●
Get Panel ON/OFF Status
Header Command
ID
0xAA
0xF9
Data Length
0
Check
Sum
●
Set Dynamic Contrast ON/OFF
Data Length Data 1
Header Command
Check
ID
Sum
0xAA
0xF9
1
PN_State
PN_State : Panel ON/OFF code to be set on TV/Monitor
1
PANEL OFF
0
PANEL ON
●
Ack
Header Command
0xAA
0xFF
●
ID
Data Length Ack/Nak
3
'A'
Nak
Data Length Ack/Nak
Header Command
ID
0xAA
0xFF
3
'N'
ERR : Error code that shows what occurred error is
r-CMD
Val 1
0xF9 PN_State
Check
Sum
r-CMD
0xF9
Check
Sum
Val 1
ERR
131
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement