Hydraulics
®
319C LN
Hydraulic Excavator
EU Sound 2000/14/EC compliant
Cat® turbocharged 3066 T diesel engine
Gross power
Net power (ISO 9249) at 1800 rpm
Operating weight range
Travel speed
Drawbar pull
97 kW/132 hp
94 kW/128 hp
20 080 to 20 580 kg
5.2 km/h
195 kN
319C LN Hydraulic Excavator
Improved performance and rugged durability combine to maximize productivity.
Operator Station
Roomy and quiet with ergonomic
control placement has excellent
sightlines to the work area to help keep
operator fatigue low and production up
throughout the entire shift. Optional
climate control maintains constant
temperature in the cab in both hot and
cold weather. pg. 4
Multipro Electronic Control System
An user friendly new monitor that
shows a wide variety of useful
information for machine operation
and provides high efficient service
data and diagnostic capabilities
while maximizing fuel efficiency
and performance. pg. 5
Improved Performance.
Drastically improved speed, increased
horsepower, extended service intervals,
a revolutionary Tool Control option
and a redesigned operator station
lead you to make the right choice.
2
Hydraulics
The open-center, two-pump hydraulic
system features pump flow control
which improves fuel efficiency, ensures
smooth controllability, reduces sound
levels and extends component life,
through an increased maximum flow.
The unique tool control option offers
the ability to optimize the machine
performances according to 5 tool
specifications, and to set priorities
between tools and implements for
maximized efficiency. pg. 6
Engine
The 319C is powered by the Cat 3066 T
engine which complies with worldwide
emissions requirements. This engine
includes several design features which
enhance performance, efficiency and
reliability. Engine service intervals are
increased to 500 hours. pg. 7
Undercarriage and Structure
Rugged Caterpillar® undercarriage
design and proven structural
manufacturing techniques assure
outstanding durability in the toughest
applications, resulting in stability,
durability and low maintenance.
Standard grease-lubricated tracks
extend the undercarriage life. pg. 8
Service and Maintenance
Longer service intervals and easier
maintenance results in better machine
availability and lower owning and
operating costs. Electronic diagnostics
means increased productivity. pg. 9
Booms and Sticks
Built for good performance and long
service life, Caterpillar booms and
sticks are large, welded box-section
structures with thick, multi-plate
fabrications that resist high stress.
Designed-in flexibility to help bring
higher production and efficiency to all
jobs. pg. 10
Buckets and Teeth
A wide variety of bucket types
with aggressive bucket designs
take advantage of the 319C’s higher
power to improve productivity.
pg. 11
Work Tools
Ex-factory available Buckets, Multiprocessors, Multi-Grapples, Hammers
and Quick Couplers provide a total
solution package to the end-user. pg. 11
Complete Customer Service
Your Cat dealer offers a wide range of
services that can be set up under a
customer support agreement when you
purchase your equipment. The dealer
will help you choose a plan that can
cover everything from machine and
attachment selection to replacement.
pg. 8
3
Operator Station
Designed for comfort and ease of operation.
1 Multipro Electronic Control System.
Caterpillar monitor panel includes
fuel level, hydraulic oil temperature
and engine temperature gauges,
machine condition indicators, and
operator controls, all combined in
one single display.
2 Joysticks. Joysticks control all
implements and swing functions
with minimal effort. This includes
4 switches on each joystick.
The integrated joystick consoles
adjust to operator preference.
Joystick consoles are suspended
as part of the seat arrangement.
Special joystick for the tool
control option feature modulated
switches.
1
2
3
4 Activation control lever. Hydraulic
activation control lever deactivates
hydraulic functions and prevents
start-up when the operator exits
the cab.
4
5
Operator work station. This operator work
station is quiet with ergonomic control
placement and convenient adjustments,
low lever and pedal effort, ergonomic seat
design, and highly efficient ventilation.
Viewing area. Excellent viewing area
through large, wide windows. A large
skylight provides upward visibility.
The upper front window features parallelogram wiper to provide unobstructed front
viewing. The upper left side door window
can slide open. The lower window
provides visibility to the tracks and
the ground next to the machine. The rear
window offers a good view behind and to
the left, aided by a lower hood profile.
Greater control convenience. Each of
the controls is positioned within easy
reach of the operator.
4
3 Travel controls. Hand or foot
actuated travel controls allow
the operator to move the excavator
while working the boom, stick
and bucket. Hand levers are easily
removable.
Cab shell. The double wall, pressed cab
shell is mounted to the swing frame using
viscous mounts for reduced sound and
vibrations.
Wiper. A standard large wiper for
the upper and lower windows offers
the selection between continuous
and intermittent modes and provides
a better visibility.
Dial throttle. Dial throttle with ten
settings for simple, precise repeatable
engine speed adjustment.
Automatic climate control. Optional
automatic climate control maintains
constant temperature in the cab in both
hot and cold weather conditions and,
at the touch of a switch, the operator can
choose between fresh or recirculated air.
5 Suspension seat. The fully
adjustable suspension seat includes
an impressive range of comfort
features. In addition to fore/aft height
and weight adjustments, it also offers
wide arm support, headrest and a
retractable seat belt. The height
adjustment system of the seat and
console allows to adjust them
together, while the console height
can be also adjusted independently.
Moreover, the armrest also has its
owns height adjustment mechanism,
providing good access to control
levers.
Skylight. A unique large polycarbonate
skylight provides very good upward
visibility, especially useful in above
ground applications.
Special joysticks for
tool control options.
Multipro
The Multipro manages the engine and hydraulics for maximum performance and enhanced
monitoring capabilities through a new user friendly interface.
Multipro. It controls state-of-the-art
hydraulics and engine performance for
maximized productivity, increased fuel
efficiency, and lower emission and
sound levels.
Compact monitor. The 319C uses a
compact monitor that nevertheless shows a
variety of information. The 319C monitor
uses a liquid crystal display, and the dot
matrix screen is capable of displaying a
wide range of items, such as written
messages. It consists of an 8-key keyboard
that makes it user friendly to the operator.
Pump Flow and Pressure Settings.
The 319C monitor is capable of recording
five hydraulic pump flow and hydraulic
pressure settings for various tools.
This function is very convenient because it
eliminates the need to adjust the hydraulics
every time a tool is changed and instantly
provides the operator with the correct
setting of flow and pressure for each tool.
Alert. This monitor is capable of autodiagnostic and is designed to alert an
impending problem to the operator.
Filter and Oil Warnings. The monitor
provides the number of hours that filter
and fluids have been used. It also
displays filter and oil change warnings
when the number of hours used reaches
the maintenance interval.
Languages. In addition to icons,
the 319C monitor displays languagebased information identifying various
functions. 20 different display
languages are available.
The 319C monitor consists of
five areas:
1 Alert indicator
2 Engine speed dial indicator
3 Gauges
4 Message area
5 Key pad
1
2
3
3
4
5
5
Hydraulics
Fast cycle times and high bucket and stick forces combine to maximize
your productivity in any job.
Hydraulic Cylinder Snubbers.
The hydraulic cylinder snubbers at rod
end of boom cylinders and both ends of
stick cylinders cushion shocks, reduce
sound and increase cylinder life, keeping
the machine working longer.
Controllability. The hydraulic system
offers precise control to the 319C,
reducing operator fatigue, improving
operator effectiveness and efficiency,
which ultimately translates into enhanced
performance.
Boom and Stick Regeneration Circuits.
Boom and stick regeneration circuits
increase efficiency and reduce cycle times
for higher productivity and lower
operating costs.
Easy to operate hydraulics.
Cat hydraulics give the 319C exceptional efficiency and controllability
unmatched in the industry for
consistently high performance in all
applications. The 319C easy-to-use
hydraulic system provides automatic
infinite priority selections between
swing and boom, maximizing performance and simplifying operation.
Boom and swing priority is adjusted
automatically depending on joystick
input, eliminating the need to select
the work-mode. This is a unique
feature in the market.
6
Auxiliary Hydraulic Circuits.
The new auxiliary hydraulic circuits
are electronically controlled, allowing
essential parameters for frequently used
hydro-mechanical worktools to be
pre-recorded. This on-board electrohydraulic system eliminates the need
for manual readjustments to the
auxiliary hydraulics, each time a
different tool is used.
Hydraulic Pumps Cross Sensing
System. It improves productivity with
faster implement speeds and quicker,
stronger pivot turns.
Integrated Tool Control system.
With the tool control (option),
the machine is being provided with an
electronic additional programmable
stackable valve and the ability to optimize
the machine performances according to
5 tool specifications (including settings
for electrical relief valve for hammer
circuit and flow). Flow distribution
between implements is analyzed and
optimized, with the ability to set priority
on the tool or the implements. This option
also includes special joysticks with
modulated switches for medium and high
pressure modulation.
Hydraulic Oil. Caterpillar hydraulic oil
offers maximum protection against
rusting, mechanical and corrosive wear
in all hydraulic systems. Caterpillar
biodegradable synthetic ester hydraulic
oil is factory-installed as an option.
Scheduled Oil Sampling. It allows for
scheduled replacement or repair of
components before the machine is stopped
because of a major breakdown.
Cat 3066 T Engine
The six-cylinder turbocharged engine is built for power,
reliability and easy maintenance.
Cat 3066 T Engine. The 319C is
powered by a Cat 3066 T diesel
engine, built for world-class
performance and reliability,
low maintenance, long life and
excellent fuel economy for low
operating costs.
The 3066E T Engine complies
with the EU sound regulation
(2000/14/EC) and Stage II EU
Emission Directive 97/68/EC.
Reliability. The 3066 T engine is
reliable, easy to maintain, with lower
maintenance cost.
The oil filter is located on
the top of the engine for easy
maintenance.
Capacity of the sump and the oil
cartridge allows to increase the
maintenance intervals from 250 h
to 500 h.
Capacity. The capacity of the engine
has been increased to 1.4 liter,
reducing the engine speed drop
during the load impact, which gives
a good engine response during
transient cycle.
Starting performance. To avoid
white smoke during cold starting,
the 3066 T engine is equipped with
an air heater on the inlet manifold.
Fuel system. Efficient direct
injection fuel system means
lower operating cost.
Aluminum alloy pistons. Heat
resistant aluminum alloy pistons
have a short compression height,
reducing weight and improving
efficiency.
Automatic Engine Control. Automatic
Engine Control (AEC) with convenient
one-touch command. Three-stage control
maximizes fuel efficiency and reduces
sound levels.
First stage AEC: Selected when the
AEC indicator on the Multipro panel
is “OFF”. If a no-load or light-load
condition continues for more than
3 seconds, the AEC reduces engine
speed by 100 rpm.
Second stage AEC: Selected when the
AEC indicator on the Multipro panel
is “ON”. If a no-load or light-load
condition continues for more than
3 seconds, the AEC reduces engine
speed to 1300 rpm.
Third stage AEC: Pressing the switch
on the top of the right hand control
joystick when the levers are in neutral
position, reduces the engine speed to
1020 rpm. If the switch is pressed
again or if a control lever is moved,
the engine speed returns to its normal
level.
7
Undercarriage and Structure
319C LN structural components and undercarriage are the backbone
of the machine’s durability.
Easier digging out. The elimination of the
ledge at carbody and roller frame juncture
reduces material build-up and makes digging
out easier.
Standard idler guards maintain track alignment. Centre section guards are standard. Full
length Track Guiding Guards are available for
additional protection on side slopes.
Robotic welding. Precision robotic
welding helps ensure quality welds.
These welds increase rigidity, reduce
internal stresses and enhance durability
for the chassis and track roller frames.
Grease-lubricated Track (GLT).
It delivers longer track link and inner
bushing life. GLT also reduces travel
noise and reduces potential for frozen
track joints.
Heavy-duty chassis design. Heavy-duty,
modified X-shaped chassis design. Cat
undercarriage components are purposely
oversized to offer heavy-duty
performance and durability.
Two-speed travel motors. Smoother auto
shifting two-speed travel motors offer
top travel speeds and plenty of pull on
slopes or turns.
Track Roller Frames. Track roller frames
are press-formed, pentagonal units to
deliver exceptional strength and service
life. Base frames are robot welded.
Heavy duty two speed travel drives.
Standard heavy duty two speed travel
drives offer smooth autoshifting,
excellent turnability and high drawbar
pull.
Upper frame. Rugged main frame is designed
for maximum durability and efficient use of
materials.
Upper frame utilizes curved side rails, which
are die-formed, for excellent uniformity and
strength throughout the length.
Box section channels improve upper frame
rigidity under the cab.
Inverted U-channels span the width of
the main frame and are formed, rather than
fabricated, for superior strength and
reduced weight.
Boom tower and main rails are constructed
of solid, high-tensile strength steel plates.
Boom foot and engine mount areas
reinforced for additional strength.
Narrow Undercarriage. The narrow undercarriage (LN) provides the best choice when
ease of transport is important while maintaining excellent lift capacity.
Complete Customer Support
Cat dealer services help you operate longer with lower costs.
Machine Selection. Make detailed
comparisons of the machines you are
considering before you buy. What are
the job requirements, machine attachments and operating hours?
What production is needed? Your Cat
dealer can provide recommendations.
Purchase. Consider the financing
options available as well as day-to-day
operating costs. This is also the time
to look at dealer services that can be
included in the cost of the machine
to yield lower equipment owning and
operating costs over the long run.
8
Customer Support Agreements.
Cat dealers offer a variety of product
support agreements, and work with
customers to develop a plan the best
meets specific needs. These plans can
cover the entire machine, including
attachments, to help protect the
customer’s investment.
Operation. Improving operating
techniques can boost your profits.
Your cat dealer has videotapes, literature
and other ideas to help you increase
productivity, and Caterpillar offers
certified operator training classes to help
maximize the return on your investment.
Product Support. You will find nearly all parts
at our dealer parts counter. Cat dealers utilize a
worldwide computer network to find in-stock
parts to minimize machine downtime. You can
save money with Cat remanufactured components.
Maintenance Services. Repair option
programs guarantee the cost of repairs up
front. Diagnostic programs such as Scheduled
Oil Sampling, Coolant Sampling and
Technical Analysis help you avoid
unscheduled repairs.
Replacement. Repair, rebuild or replace?
Your Cat dealer can help you evaluate the cost
involved so you can make the right choice.
Maximum uptime – Service and Maintenance
Extended Service Intervals and Easy access reduce operating costs.
Extended Service Intervals.
319C service and maintenance intervals
have been extended to reduce machine
service time and increase machine
availability.
Air Filter Compartment. The air filter
features a double-element construction
for superior cleaning efficiency.
When the air cleaner plugs, a warning
is displayed on the monitor screen
inside the cab.
Ground Level Service. The design
and layout of the 319C was made
with the service technician in mind.
Many service locations are easily
accessible at ground level allowing
critical maintenance to get done
quickly and efficiently.
Pump Compartment. A service door
on the right side of the upper structure
allows ground-level access to the pump
and pilot filter.
Capsule Filter. The hydraulic return
filter, a capsule filter, is situated outside
the hydraulic tank. This filter prevents
contaminants from entering the system
when hydraulic oil is changed and keeps
the operation clean.
Anti-Skid Plate. Anti-skid punched-star
plate covers the top of storage box and
upper structure to prevent slipping
during maintenance.
Engine Inspection. Engine can be
accessed from the upper structure or
from under the machine. The engine and
pump compartment are separated by
a partial steel wall.
Water Separator. Water separator
removes water from fuel even when
under pressure and is located in the
battery compartment. Optional water
level sensor within cab alarm.
Handrails and Steps. Larger handrails
and steps assist operator in climbing
on and off machine.
Grease-lubricated Track. Grease
lubricated seals protect the track link
and deliver long track link pin and
bushing inner wear life.
Fan Guard. Engine radiator fan is
completely enclosed by fine wire mesh,
reducing the risk of an accident.
Greasing Block. Remote greasing block
on the boom and two grease points for
the swing bearing deliver grease to hardto-reach locations.
Electronic Power Unit Control.
Monitor Electronic Power Unit Control
has diagnostic capabilities for service
technicians use. Dealer service technicians
can quickly and easily diagnose and
adjust machine component maximizing
uptime. Filter change information
available in 20 different languages.
Swing-out Oil Cooler. Without using
tools, the oil cooler swings out horizontally for excellent cleaning access.
Diagnostics and Monitoring. The 319C
is equipped with S•O•SSM sampling
ports and hydraulic test ports for the
hydraulic system, engine oil and for
coolant. A test connection for the
Electronic Technician (ET) is located
in the air filter compartment.
Radiator Compartment. The left rear
service door allows easy access to
the engine radiator and the oil cooler.
A reserve tank and drain cock are
attached to the radiator for simplified
maintenance.
Caterpillar Product Link system
attachment. It includes a transceiver
module (on-board the machine), office
application PC software, and a satellite
communications network to track
machine hours, location, and warnings.
Product Link simplifies maintenance
scheduling, fleet management,
unauthorized machine usage or
movement, and product problem event
tracking and diagnosis (PL-201).
Bearings. New boom and stick standard
bearings only need greasing every
1000 hours.
9
Booms and Sticks
The 319C has designed-in flexibility to help bring total solution for higher production and
efficiency to your jobs.
offers flexibility and versatility in the
working envelop. With full extension,
the working range gives both maximum
dig depth and reach above ground.
Equally, when the VA boom is retracted,
it can work closer to its tracks, increase
lifting capacity and work in confined
areas. All hydraulic adjustments to the
VA boom angle can be made from the
cab during a work cycle for true
versatility.
the 319C offers several combinations
of reach and digging forces for optimum
versatility.
The right combination for the job.
Select the right combination for the job
with your Cat dealer and you’ll help
ensure top production from the start.
One-piece boom. One-piece boom for
all standard applications.
Booms and sticks. Caterpillar excavator
booms and sticks are built for
performance and long service life.
Large, welded, box-section structures
with thick, multi-plate fabrications in
high-stress areas.
Construction allows structures to flex
and dissipate stresses.
Single Offset boom. Single Offset boom
for application requiring excavation work
alongside the machine. It is ideal for
working under pipes, along walls and in
other urban conditions where machine
access is difficult.
Variable Angle Boom. A new variable
angle boom (VA) with a significantly
reduced weight, for vertical wall digging,
working near obstacles or in tight
quarters. The variable geometry boom
Three booms and four sticks.
The choice of three application booms
and four sticks plus a wide selection
of buckets and attachments, means
Short stick. Short stick for mass
excavation and maximum breakout
force bucket up to 1.35 m3.
Medium stick. Medium stick for
maximum versatility bucket up to 1.2 m3.
Long stick. Long stick for all standard
applications bucket up to 1.05 m3.
Extra long stick. Extra long stick for
maximum reach and digging depth.
Bucket up to 0.80 m3.
Linkage Bearings. New bearing
technology has extended the front
linkage greasing intervals for all
bearings, up to 1000 hours for the
boom and stick and up to 100 hours
for the bucket.
Work Tools Matching Guide
Without quick coupler
Hammers
Multiprocessor
Crushers and Pulverizers
Vibratory Plate Compactors
Hydraulic Shears
Mechanical Grapples
Multi-Grapples
Orange Peel
Grapples
10
5 tines
4 tines
5 tines
4 tines
5 tines
4 tines
4/5 tines
500 mm shoes
mm
H115s/H120Cs
MP15 CC/PS
MP15 CR/S
MP15 PP
VHC-30
VHP-30
CVP75
S320
S325*
G112
G315B-D
G315B-R
GSH15-400
GSH15-400
GSH15-500
GSH15-500
GSH15-600
GSH15-600
GSH15-800
* Boom Mounted
1800 2250 2700 3200
×
×
×
×
×
×
×
×
×
×
×
×
×
Quick Coupler
Hammers
Multiprocessor
Crushers and Pulverizers
Vibratory Plate Compactors
Mechanical Grapples
Multi-Grapples
×
×
×
500 mm shoes
With quick coupler
mm
CW-30
CW-30S
H115s/H120Cs
MP15 CC/CR/S
VHC-30
VHP-30
CVP75
G112
G315B-D
G315B-R
Maximum Material density 1800 kg/m3
×
×
×
×
360° Working Range
Over the front only
×
1800 2250 2700 3200
Maximum Material density 1200 kg/m3
×
×
×
×
×
×
×
×
×
×
×
×
Available
×
Not recommended
Work Tools and GET
A wide variety of Work Tools help optimize machine performance.
Purpose designed and built to Caterpillar’s high durability standards.
1
2
10
11
12
Rationalized Bucket Line. Optimized design
matches machine configuration perfectly.
Improved balance between performance
and durability. Buckets feature the new
Caterpillar K Series Tooth System.
1 Excavation (X). Digs and loads soft to
medium materials such as clay and earth.
Features weld on tip adapters, wear
resistant steel alloy cutting edge and wear
plates, and high grade steel side bars.
2 Extreme Excavation (EX). Digs and loads
compact/abrasive materials like earth/rock,
sand/clay, sand/gravel, coal, chalk and
low abrasion ores. Features bigger ground
engaging tools, plus all wear resistant
steel alloy cutting edge, wear plates and
side bars.
K Series Tip Selection. The new Caterpillar
K Series Tooth System holds tighter,
changes easier and stays sharper.
10 General Duty
11 Extra Duty
12 Penetration
13 Penetration Plus
14 Heavy Penetration
15 Heavy Abrasion
16 Wide
17 Spike
18 Double Spike
4
3
13
14
15
16
17
18
3 Buckets for Special Applications.
Choose from a variety of buckets
such as ditch cleaning buckets
(tiltable), skeleton buckets (heavy
duty) and trapezoidal buckets.
Each of these buckets enhances the
performance in special applications.
Ask your dealer representative to
recommend the optimum solution
for your material and operation.
4 Quick Coupler. Caterpillar quick
couplers enable the operator to
simply release one work tool and
pick up another. Your hydraulic
excavator becomes highly versatile.
The dedicated CW-Series quick
coupler enables a quick tool
exchange while maintaining top
machine performance. A lifting
hook is added for maximum lift
capacity.
Work Tools. Choose from a variety
of work tools such as hammers,
crushers, pulverizers, shears, multiprocessors and grapples.
Tool Control. Five hydraulic pump flow
and pressure settings can be preset on
the Multipro, eliminating the need to
adjust the hydraulics each time a tool is
changed. Selecting the proper setting
from the Multipro’s menu instantly
provides the operator with the correct
amount of flow and pressure for the
tool. The unique Cat proportional
sliding switches provide modulation to
the tool and make precision work easy.
11
Engine
Hydraulic System
Cat 3066 T diesel engine
Ratings
1800 rpm
Gross Power
97 kW/132 hp
Net Power
ISO 9249
94 kW/128 hp
EEC 80/1269
94 kW/128 hp
Bore
102 mm
Stroke
130 mm
Displacement
6.4 liters
Cylinders
6
Net power advertised is the power
available at the flywheel when the
engine is equipped with fan, air
cleaner, muffler, and alternator.
No engine derating required below
2300 m altitude.
Meets Stage 2 EU Emission Directive
97/68/EC.
Steering
Main Implement System
Maximum Flow (2x)
190 l/min
Maximum pressure
Implements
343 bar
Travel
343 bar
Swing
230 bar
Pilot System
Maximum flow
32.5 l/min
Maximum pressure
41 bar
Cylinders, Bore and Stroke
Boom (2)
120 x 1193 mm
Stick (1)
130 x 1364 mm
Bucket (1)
small/medium
stick
120 x 1030 mm
long/extra long
stick
110 x 1048 mm
Brakes
Swing Mechanism
Meets ISO10265:1998
Hydrostatic with independent planetary
reduction.
Service and parking brake features
wet, multiple-disc brakes are used on
the final drive input shafts
spring-applied, hydraulically released
actuating a travel control
simultaneously releases the brakes
when the controls are released, the
brakes automatically apply
Swing Speed
Swing Torque
10.5 rpm
48.5 kNm
Drive
Two joysticks hand levers actuate
boom, Stick, bucket and swing
Drive system is fully hydrostatic
Maximum Travel Speed
Maximum Drawbar Pull
12
Controls
controls are pilot-operated for
reduced efforts
left pedal and lever control left track;
right pedal and lever control right
track
when idlers are in front, pushing both
pedals or levers forward moves the
excavator straight ahead
when the idlers are in front, rocking
both pedals or pulling both levers
backward moves the excavator
straight back
moving one pedal or lever more than
the other, either forward or backward,
results in a gradual turn
moving one pedal or lever forward
and the other pedal or lever backward
counter-rotates the tracks for spot
turns
Cab/FOGS
Bolt-on Falling Object Guard System
(FOGS) is available as an attachment.
Cab/FOGS meets ISO 10262.
Implement Controls
Attachments
Hammer is activated by auxiliary left
pedal or switch on right side joystick.
Auxiliary hydraulic lines are
activated by aux. left pedal.
Medium pressure hydraulic lines are
activated by switch on left side
joystick or right pedal.
Two rocker pedals with detachable hand
levers control steering and travel
functions.
Sound Levels
5.5 km/h
196 kN
each track is driven by one
independent, automatic shifting, twospeed axial piston motor via integral
planetary final drives
each drive module is well integrated
into the roller frame for total
protection
standard heavy-duty travel drive
increase drawbar pull and provide a
better turnability.
319C LN Hydraulic Excavator specifications
Operator Sound
The operator sound level measured
according to the procedures specified
in ISO 6396 is 76 dB(A), for cab
offered by Caterpillar, when properly
installed and maintained and tested
with the doors and windows closed.
Exterior Sound
The labeled spectator sound power
level measured according to the test
procedures and conditions specified
in 2000/14/EC is 101 dB(A).
Dimensions
All dimensions are approximate.
L
M
C
K
A
J
D
H
G
E
F
B
mm
A Shipping height (with bucket)*
Short stick
Medium stick
Long stick
Extra Long stick
B Shipping length
Short stick
Medium stick
Long stick
Extra Long stick
2886
2904
3000
3210
mm
C
D
E
F
G
Tail swing radius
Swing ground clearance
Length to centers of rollers
Track length
Shipping width
with 500 mm shoes
mm
2520
1050
3636
4450
Track gauge
Ground clearance
Cab height
Overall width with
mirrors installed
M Shipping width upper frame
H
J
K
L
2495
1995
465
2950
2925
2520
9000
8906
8820
8870
* may be limited by cab height (K)
Service Refill Capacities
Liters
Fuel Tank
Cooling System
Engine Oil
Swing Drive
Final Drive (each)
Hydraulic system
(including tank)
Hydraulic tank
320
30
13
8
13
188
105
Operating Weights
Machine is equipped with One-piece boom, stick, full fuel tank, operator,
1.05 m3 bucket, versatility and comfort package, quick coupler,
quick coupler control group, full length track guiding guards, bottom guard,
check valves and heavy duty travel drives.
Sticks
500 mm triple grouser
600 mm triple grouser
500 mm heavy duty
Short
1800 mm
Medium
2250 mm
Long
2700 mm
Extra long
3200 mm
kg
kg
kg
kg
20 090
20 345
20 482
20 080
20 335
20 472
20 100
20 355
20 492
20 190
20 445
20 582
319C LN Hydraulic Excavator specifications
13
Undercarriage
Boom, Stick and Bucket
Compatibility
Based on operating weights.
Material Densities
*kg/m3
Track width*
500 mm triple grouser
319C LN
600 mm triple grouser
319C LN
500 mm heavy duty
319C LN
Ground Pressure
One-piece boom
Extra long stick
Long stick
Medium stick
Short stick
Variable Angle Boom
Extra long stick
Long stick
Medium stick
Short stick
0.53 bar
0.45 bar
0.54 bar
* Custom product undercarriage are available.
Contact your Caterpillar dealer for specifics.
Bucket range
0.41 to 0.80 m3
0.41 to 1.05 m3
0.41 to 1.20 m3
0.41 to 1.35 m3
0.41 to 0.80 m3
0.41 to 1.05 m3
0.41 to 1.20 m3
0.41 to 1.35 m3
Clay, dry
Clay, wet
Earth, dry
Earth, wet
Loam
Gravel, dry
Gravel, wet
Gravel, pit run
Rock/dirt, 50%
Sand, dry
Sand, wet
Sand and Clay
Stone, crushed
Top soil
1500
1660
1510
1600
1250
1510
2000
1930
1720
1425
1700
1600
1600
950
* Kilograms per loose cubic meter
Recommended Maximum Material Density
Excavation
Width
Weight
Capacity
Short stick
Medium stick
Long stick
Extra long stick
mm
kg
m3
kg/m3
kg/m3
kg/m3
kg/m3
600
473
0.41
1800
1800
1800
1800
750
525
0.55
1800
1800
1800
1800
Extreme Excavation
1000
654
0.81
1800
1800
1500
1500
1250
753
1.05
1800
1500
1200
1400
833
1.2
1500
1200
1500
872
1.35
1200
600
519
0.41
1800
1800
1800
1800
750
562
0.55
1800
1800
1800
1800
1000
702
0.81
1800
1800
1500
1500
1250
819
1.05
1800
1500
1200
1400
878
1.2
1500
1200
1250
1410
1.05
819
1400
1410
1.2
878
Bucket Specifications
Contact your Caterpillar dealer for special bucket requirements.
Excavation
A Bite width
B Tip radius
Capacity
Weight
mm
mm
m3
kg
600
1410
0.41
473
750
1410
0.55
525
Extreme Excavation
1000
1410
0.81
654
1250
1410
1.05
753
1400
1410
1.2
833
1500
1410
1.35
872
600 750 1000
1410 1410 1410
0.41 0.55 0.81
519 562 702
➤
14
319C LN Hydraulic Excavator specifications
A
➤
➤
B
➤
Working Ranges
With One-piece boom
m
➤
9
8
7
➤
6
5
C
➤
4
3
D
2
E
➤
➤
➤
➤
➤
0
➤➤
➤
1
B
1
1800mm
1800
2250mm
2250
2700mm
2700
3200mm
3200
G
2
F
A
➤
3
➤
5
➤
4
Short
mm
Medium
mm
Long Extra long
mm
mm
Stick – Choice of four
1800
A Maximum Digging Depth
5438
B Maximum Reach
at Ground Level
8238
C Maximum
Cutting Height
8644
Maximum
Loading Height
5925
E Minimum Loading Height
3294
F Maximum Digging
Depth 2440 mm Level Bottom 3744
G Maximum Vertical
Wall Digging Depth
5116
Bucket Tip Radius
1310
Bucket Forces (ISO 6015)
133 kN
Stick Forces (ISO 6015)
119 kN
2250
5888
2700
6338
3200
6838
8679
9133
9661
8966
9275
9679
6198
2845
6498
2386
6895
1895
4748
5319
5925
5620
1310
130 kN
103 kN
6115
1310
111 kN
88 kN
6545
1310
112 kN
79 kN
Short
mm
Medium
mm
Stick – Choice of four
1800
A Maximum Digging Depth
4900
B Maximum Reach
at Ground Level
8160
C Maximum
Cutting Height
9630
D Maximum
Loading Height
6710
E Minimum Loading Height
3710
F Maximum Digging
Depth 2440 mm Level Bottom 4750
G Maximum Vertical
Wall Digging Depth
3360
Bucket Tip Radius
1310
Bucket Forces (ISO 6015)
133 kN
Stick Forces (ISO 6015)
124 kN
2250
5410
2700
5860
3200
6380
8610
9060
9590
9960
10 350
10 840
7120
3300
7450
2790
7960
2420
5300
5750
6260
3740
1310
130 kN
106 kN
4090
1310
111 kN
91 kN
4440
1310
112 kN
81 kN
6
7
10
9
8
7
6
5
4
3
2
1
0
1
m
Working Ranges
With Variable Angle Boom (VA)
m
➤
10
9
8
➤
7
6
5
C
➤
4
D
3
2
E
➤
➤
➤
➤
➤
0
➤➤
➤
1
B
1
2
G
➤
➤
3
1800mm
1800
2250mm
2250
2700mm
2700
3200mm
3200
F
A
➤
4
Long Extra long
mm
mm
5
6
7
10
9
8
7
6
5
4
3
2
1
0
1
m
319C LN Hydraulic Excavator specifications
15
Lift capacities with One-piece boom
All weights are in kg
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
500 mm
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
500 mm
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
500 mm
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
500 mm
Load Point Height
0m
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
0m
1.5 m
*7880
*7880
*11090
*11190
8290
8500
3.0 m
*5090
*5950
*7450
*8810
*9380
*9160
*8030
*5090
5370
4940
4560
4400
4390
4520
4.5 m
*5240
*5820
6290
6160
6150
*5400
*5130
*5160
4910
4700
4850
5480
*6330
3410
3240
3070
2970
2950
6.0 m
4.21
5.79
6.67
7.13
7.25
7.05
6.49
5.47
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*5600 *5600 *10040
*11050 *11050 *12200
*8900
0m
1.5 m
8280
8460
8840
3.0 m
*5440
*6980
*8500
*9330
*9360
*8530
*5440
5080
4690
4470
4420
4500
4.5 m
*4660
*4900
*5550
*6270
6200
6150
*6040
3550
3480
3310
3130
3000
2960
3040
6.0 m
*4460
4500
2310
2240
*4570
*4090
*3990
*4100
4340
4460
4940
*6000
*6100
*4570
3240
2590
2280
2160
2200
2430
3020
4940
4.91
6.31
7.13
7.56
7.67
7.48
6.96
6.02
4.4
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*5070
*9110
0m
*9730
9660
*5560
*5070 *9100
*9110 *12300
*10280
*5560
8220
8360
8660
1.5 m
3.0 m
*6380
*8040
*9110
*9390
*8850
*7030
5170
4750
4490
4390
4420
4610
4.5 m
*4110
*4450
*5160
*5970
6180
6100
6130
3580
3490
3320
3130
2980
2910
2930
6.0 m
*3220
4560
4470
4390
2360
2300
2210
2140
*3190
*2880
*2800
*2870
*3060
*3440
*4140
5340
*5800
*3190
2800
2290
2030
1930
1960
2140
2590
3820
5.59
6.85
7.61
8.01
8.12
7.94
7.45
6.59
5.15
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*8020
*8020
*5670
*4240 *4240 *8120
*7530 *7530 *12440
*12080 *12080 *11510
*5670
*8120
8220
8470
Load Radius Over Front
*5690
*7480
*8790
*9330
*9100
*7840
5300
4840
4520
4370
4360
4480
Load Radius Over Side
*3330
*3610
*4000
*4760
*5640
6200
6080
6070
*3330
*3610
3560
3380
3160
2990
2890
2880
*3670
*4310
4490
4390
4340
2410
2330
2230
2140
2090
319C LN Hydraulic Excavator specifications
*2700
*2450
*2380
*2410
*2540
*2800
*3250
*4130
*5330
*2700
2430
2030
1820
1740
1760
1890
2230
3030
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
16
*5400
3680
2840
2470
2330
2380
2670
3470
6.36
7.48
8.18
8.56
8.66
8.49
8.04
7.24
5.97
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
600 mm
Load Point Height
0m
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
0m
1.5 m
*7880
*7880
*11090
*11190
8400
8610
3.0 m
*5090
*5950
*7450
*8810
*9380
*9160
*8030
*5090
5440
5000
4630
4460
4460
4580
4.5 m
*5240
*5820
6380
6250
6240
*5400
*5130
*5160
4980
4770
4920
5560
*6330
3450
3290
3120
3010
3000
6.0 m
*5400
3730
2880
2500
2370
2420
2710
3520
4.21
5.79
6.67
7.13
7.25
7.05
6.49
5.47
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*5600 *5600 *10040
*11050 *11050 *12200
*8900
0m
1.5 m
8390
8570
*8900
3.0 m
*5440
*6980
*8500
*9330
*9360
*8530
*5440
5150
4750
4540
4490
4560
4.5 m
*4660
*4900
*5550
*6270
6290
6240
*6040
3600
3520
3360
3170
3050
3000
3080
6.0 m
*4460
4560
2350
2280
*4570
*4090
*3990
*4100
4400
4520
5020
*6000
*6100
*4570
3280
2620
2310
2200
2230
2460
3070
5000
4.91
6.31
7.13
7.56
7.67
7.48
6.96
6.02
4.4
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*5070
*9110
0m
*9730
*9730
*5560
*5070 *9100
*9110 *12300
*10280
*5560
8330
8470
8780
1.5 m
3.0 m
*6380
*8040
*9110
*9390
*8850
*7030
5230
4810
4550
4450
4490
4670
4.5 m
*4110
*4450
*5160
*5970
6270
6190
6220
3630
3540
3360
3170
3020
2950
2980
6.0 m
*3220
*4580
4530
4450
2390
2330
2240
2170
*3190
*2880
*2800
*2870
*3060
*3440
*4140
5420
*5800
*3190
2840
2320
2070
1970
1990
2180
2630
3870
5.59
6.85
7.61
8.01
8.12
7.94
7.45
6.59
5.15
7.5 m
m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
–1.5 m
–3.0 m
–4.5 m
*8020
*8020
*5670
*4240 *4240 *8120
*7530 *7530 *12440
*12080 *12080 *11510
*5670
*8120
8330
8580
Load Radius Over Front
*5690
*7480
*8790
*9330
*9100
*7840
5370
4910
4580
4430
4420
4550
Load Radius Over Side
*3330
*3610
*4000
*4760
*5640
6290
6170
6160
*3330
*3610
3610
3420
3210
3030
2930
2920
*3670
*4310
4560
4450
4400
2440
2360
2260
2170
2120
*2700
*2450
*2380
*2410
*2540
*2800
*3250
*4130
*5330
*2700
*2450
2060
1850
1770
1780
1920
2260
3070
6.36
7.48
8.18
8.56
8.66
8.49
8.04
7.24
5.97
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
319C LN Hydraulic Excavator specifications
17
Lift capacities with One-piece boom
All weights are in kg
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
500 mm HD
0m
1.5 m
3.0 m
4.5 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
–1.5 m
–3.0 m
*7880
*7880
*11090
*11190
8460
8660
0m
1.5 m
3.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
–1.5 m
–3.0 m
–4.5 m
*5600 *5600 *10040
*11050 *11050 *12200
*8900
0m
1.5 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
–1.5 m
–3.0 m
–4.5 m
*5070
*9110
0m
4.5 m
*5240
*5820
6420
6290
6280
*5400
*5130
*5160
5020
4800
4960
5600
*6330
3470
3310
3140
3030
3020
6.0 m
8440
8630
*8900
3.0 m
*9730
*9730
*5560
*5070 *9100
*9110 *12300
*10280
*5560
8390
8530
8830
1.5 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
–1.5 m
–3.0 m
–4.5 m
4.21
5.79
6.67
7.13
7.25
7.05
6.49
5.47
7.5 m
*5440
*6980
*8500
*9330
*9360
*8530
*5440
5180
4780
4570
4520
4590
4.5 m
*4660
*4900
*5550
*6270
6330
6280
*6040
3620
3550
3380
3200
3070
3020
3100
6.0 m
*4460
4590
2360
2290
*4570
*4090
*3990
*4100
*4420
4550
5050
*6000
*6100
*4570
3300
2640
2330
2210
2250
2480
3090
5030
4.91
6.31
7.13
7.56
7.67
7.48
6.96
6.02
4.4
7.5 m
3.0 m
*6380
*8040
*9110
*9390
*8850
*7030
5260
4840
4580
4480
4520
4700
4.5 m
*4110
*4450
*5160
*5970
6310
6230
6260
3650
3560
3380
3190
3040
2970
3000
6.0 m
*3220
*4580
4560
4480
2410
2350
2260
2190
*3190
*2880
*2800
*2870
*3060
*3440
*4140
5460
*5800
*3190
2860
2340
2080
1980
2010
2190
2650
3900
5.59
6.85
7.61
8.01
8.12
7.94
7.45
6.59
5.15
7.5 m
*8020
*8020
*5670
*4240 *4240 *8120
*7530 *7530 *12440
*12080 *12080 *11510
*5670
*8120
8390
8630
Load Radius Over Front
*5690
*7480
*8790
*9330
*9100
*7840
5400
4940
4610
4460
4450
4580
Load Radius Over Side
*3330
*3610
*4000
*4760
*5640
6330
6210
6200
*3330
*3610
3630
3440
3230
3050
2950
2940
*3670
*4310
4590
4490
4430
2460
2380
2280
2190
2140
319C LN Hydraulic Excavator specifications
*2700
*2450
*2380
*2410
*2540
*2800
*3250
*4130
*5330
*2700
*2450
2070
1870
1780
1800
1940
2280
3090
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
18
*5400
3750
2900
2520
2380
2440
2730
3550
m
Ground
Load Point Height
*5090
5470
5030
4660
4490
4490
4620
m
Ground
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
500 mm HD
*5090
*5950
*7450
*8810
*9380
*9160
*8030
m
Ground
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
500 mm HD
7.5 m
m
Ground
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
500 mm HD
6.0 m
6.36
7.48
8.18
8.56
8.66
8.49
8.04
7.24
5.97
Lift capacities with Variable Angle boom
All weights are in kg
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
500 mm
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
500 mm
0m
1.5 m
*6550
*7080
*11170
*12750
*13850
Ground
*12430 *12430 *14660
–1.5 m *13940 *13940 *14240 *14240 *14920
*18980 *18980 *11900
–3.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0m
1.5 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
*6110 *6110
Ground *10930 *10930 *11440 *11440
1.5 m
7.5 m
*6550
*7080
10520
10130
9860
8990
8690
8560
3.0 m
*7130
*7940
*8860
*9330
*9340
*9390
*6450
*5840
5780
5670
5290
4910
4570
4500
4.5 m
*6440
6560
6540
6320
*5790
*6190
*5330
*5150
5020
4790
4940
*4640
3440
3370
3210
3020
2910
6.0 m
*6190
3780
2860
2450
2300
2350
2660
4.03
5.66
6.56
7.03
7.15
6.95
6.38
7.5 m
*6970 *6970
*12630 10240
*13620 *10080
*14620
9240
*14890
8790
*13720
8660
3.0 m
*5290
*5850
*7000
*8600
*9320
*9360
*9540
*8020
*5290
*5850
5830
5690
5440
5020
4730
4530
4.5 m
*4780
*6220
*6570
*6520
6430
6230
3530
3590
3520
3340
3120
2950
6.0 m
4480
2170
*4680
*4120
*3980
*4070
*4360
4530
*4520
*3620
*4680
3300
2590
2260
2130
2170
2400
3040
4.76
6.19
7.02
7.46
7.58
7.38
6.85
5.9
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
*14640
*7840 *7840 *10890
–1.5 m *10110 *10110 *11500
–3.0 m *10880 *10880 *13760
–4.5 m
Ground
0m
*14640
*10890
*11500
*13760
1.5 m
*4650 *4650
*12440 *10280
*13250
9970
*14120
9470
*14750
8860
*14660
8710
*8790
8670
3.0 m
*4480
*4550
*5270
*8180
*9130
*9300
*9380
*8900
*4480
*4550
*5270
5650
5540
5080
4770
4510
4.5 m
*4240
*5010
*6320
6460
6460
6260
*5050
3610
3650
*3580
3410
3180
2960
2880
6.0 m
*2830
*4330
4490
4390
2290
2270
2190
2090
*4590
*3260
*2900
*2800
*2840
*3020
*3380
*4050
*3610
*4590
*3260
2840
2290
2010
1900
1930
2110
2590
3.02
5.45
6.74
7.51
7.92
8.03
7.84
7.35
6.47
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
*17090
*6050 *6050 *11070
–1.5 m *8650 *8650 *12990
–3.0 m *11210 *11210 *15130
–4.5 m *11580 *11580 *19300
Ground
Load Point Height
6.0 m
m
0m
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
500 mm
4.5 m
m
–1.5 m *12600 *12600 *13900 *13900
–3.0 m *13770 *13770 *18090 *18090
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
500 mm
3.0 m
Load Radius Over Front
*17090
*11070
*12990
*15130
*19300
*9070
*13170
*14020
*14610
*14880
*11840
*9070
9990
9760
8970
8670
8610
*3870
*3640
*4080
*6070
*8830
*9270
*9290
*9390
*6500
*3870
*3640
*4080
5690
*5580
5210
4820
4570
4480
Load Radius Over Side
*3220
*3780
*4150
*5240
6470
6410
6320
6180
*3220
3710
3760
3700
3560
3320
3050
2890
*3560
*4290
4550
4440
4340
2410
2380
2280
2150
2050
*3550
*2750
*2470
*2370
*2390
*2510
*2750
*3190
*3470
*3550
*2750
2450
2020
1800
1700
1720
1860
2210
4.28
6.23
7.37
8.08
8.46
8.57
8.4
7.94
7.13
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
319C LN Hydraulic Excavator specifications
19
Lift capacities with Variable Angle boom
All weights are in kg
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
600 mm
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
600 mm
Load Point Height
0m
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
m
*6570 *6570
7.5 m
*7090 *7090
6.0 m
*11180 10650
4.5 m
*12770 *10180
3.0 m
*13860
9990
1.5 m
*12450 *12450 *14680
9120
0m
–1.5 m *13950 *13950 *14260 *14260 *14940 8820
*19000 *19000 *11920
8690
–3.0 m
0m
1.5 m
3.0 m
*7140
*7960
*8880
*9350
*9360
*9410
*6460
5910
*5840
5750
5370
4990
4650
4570
4.5 m
*6460
6640
6600
6420
*5810
*6210
*5350
*5170
5110
4870
5030
*4660
3500
3430
3270
3080
2960
6.0 m
4.03
5.66
6.56
7.03
7.15
6.95
6.38
7.5 m
m
7.5 m
6.0 m
*6990 *6990
4.5 m
*12640 *10350
3.0 m
*6130 *6130 *13630 *10100
1.5 m
0 m *10950 *10950 *11460 *11460 *14640 9370
–1.5 m *12620 *12620 *13920 *13920 *14910 8920
–3.0 m *13790 *13790 *18120 *18120 *13740 8790
0m
1.5 m
3.0 m
*5310
*5860
*7020
*8610
*9340
*9370
*9560
*8040
*5310
*5860
5880
5760
5520
5100
4800
4600
4.5 m
*4800
*6230
*6590
6590
6540
6340
3590
3650
3580
3400
3180
3010
6.0 m
4560
2220
*4700
*4140
*4000
*4080
*4380
4610
*4540
*3640
*4700
3360
2640
2310
2180
2210
2460
3100
4.76
6.19
7.02
7.46
7.58
7.38
6.85
5.9
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m *7860 *7860
–1.5 m *10130 *10130
–3.0 m *10900 *10900
–4.5 m
0m
*14670
*10910
*11520
*13790
*14670
*10910
*11520
*13790
1.5 m
*4670
*12450
*13270
*14130
*14770
*14670
*8810
*4670
10360
10090
9590
8990
8830
8800
3.0 m
*4490
*4560
*5290
*8190
*9140
*9320
*9390
*8910
*4490
*4560
*5290
5720
5620
5160
4840
4590
4.5 m
*4260
*5030
*6340
6540
6540
6360
*5070
3670
3710
3630
3470
3240
3020
2940
6.0 m
*2850
*4350
4560
4470
2340
2320
2240
2140
*4610
*3280
*2920
*2810
*2860
*3040
*3400
*4070
*3630
*4610
*3280
2900
2330
2060
1950
1970
2160
2640
3.02
5.45
6.74
7.51
7.92
8.03
7.84
7.35
6.47
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m *6070 *6070
–1.5 m *8670 *8670
–3.0 m *11230 *11230
–4.5 m *11600 *11600
*17110
*11090
*13010
*15160
*19320
*17110
*11090
*13010
*15160
*19320
*9080
*13200
*14030
*14630
*14890
*11860
Load Radius Over Front
*9080
10110
9890
9100
8790
8740
*3890
*3660
*4100
*6080
*8850
*9290
*9300
*9410
*6510
*3890
*3660
*4100
5770
5600
5290
4900
4650
4560
Load Radius Over Side
*3240
*3800
*4170
*5260
6550
6490
6420
*6240
*3230
*3760
3810
3760
3620
3370
3110
2950
*3580
*4310
4620
4520
4420
2460
2430
2330
2200
2100
319C LN Hydraulic Excavator specifications
*3570
*2770
*2490
*2390
*2410
*2520
*2770
*3200
*3490
*3570
*2770
*2490
2060
1840
1750
1760
1910
2260
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
20
*6210
3840
2920
2510
2350
2400
2710
4.28
6.23
7.37
8.08
8.46
8.57
8.4
7.94
7.13
319C LN
Short stick
1800 mm
Quick coupler
239 kg
Shoes
500 mm HD
319C LN
Medium stick
2250 mm
Quick coupler
239 kg
Shoes
500 mm HD
319C LN
Long stick
2700 mm
Quick coupler
239 kg
Shoes
500 mm HD
319C LN
Extra long stick
3200 mm
Quick coupler
239 kg
Shoes
500 mm HD
Load Point Height
0m
1.5 m
3.0 m
4.5 m
6.0 m
7.5 m
m
*6570 *6570
7.5 m
*7090 *7090
6.0 m
*11180 10700
4.5 m
*12770 *10180
3.0 m
*13860 10040
1.5 m
*12450 *12450 *14680
9170
0m
–1.5 m *13950 *13950 *14260 *14260 *14940 8870
*19000 *19000 *11920
8740
–3.0 m
0m
1.5 m
3.0 m
*7140
*7960
*8880
*9350
*9360
*9410
*6460
5940
5860
5780
5400
5020
4680
4600
4.5 m
*6460
6670
6620
6460
*5810
*6210
*5350
*5170
5140
4910
5070
*4660
3520
3450
3290
3100
2990
6.0 m
*6210
3870
2930
2520
2370
2420
2730
4.03
5.66
6.56
7.03
7.15
6.95
6.38
7.5 m
m
7.5 m
6.0 m
*6990 *6990
4.5 m
*12640 *10350
3.0 m
*6130 *6130 *13630 10100
1.5 m
0 m *10950 *10950 *11460 *11460 *14640 9420
–1.5 m *12620 *12620 *13920 *13920 *14910 8970
–3.0 m *13790 *13790 *18120 *18120 *13740 8840
0m
1.5 m
3.0 m
*5310
*5860
*7020
*8610
*9340
*9370
*9560
*8040
*5310
*5860
5910
5790
5550
5130
4830
4640
4.5 m
*4800
*6230
*6590
6630
6580
6380
3610
3670
3600
3420
3200
3030
6.0 m
4590
2240
*4700
*4140
*4000
*4080
*4380
4640
*4540
*3640
*4700
3380
2660
2330
2200
2230
2470
3120
4.76
6.19
7.02
7.46
7.58
7.38
6.85
5.9
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m *7860 *7860
–1.5 m *10130 *10130
–3.0 m *10900 *10900
–4.5 m
0m
*14670
*10910
*11520
*13790
*14670
*10910
*11520
*13790
1.5 m
*4670
*12450
*13270
*14130
*14770
*14670
*8810
*4670
10420
10150
9650
9040
8890
*8810
3.0 m
*4490
*4560
*5290
*8190
*9140
*9320
*9390
*8910
*4490
*4560
*5290
5760
5650
5190
4880
4620
4.5 m
*4260
*5030
*6340
*6580
*6580
6410
*5070
3690
3730
3660
3490
3260
3050
2960
6.0 m
*2850
*4350
4590
4500
2360
2340
2260
2160
*4610
*3280
*2920
*2810
*2860
*3040
*3400
*4070
*3630
*4610
*3280
2920
2350
2070
1960
1990
2180
2660
3.02
5.45
6.74
7.51
7.92
8.03
7.84
7.35
6.47
7.5 m
m
9.0 m
7.5 m
6.0 m
4.5 m
3.0 m
1.5 m
0 m *6070 *6070
–1.5 m *8670 *8670
–3.0 m *11230 *11230
–4.5 m *11600 *11600
*17110
*11090
*13010
*15160
*19320
Load Radius Over Front
*17110
*11090
*13010
*15160
*19320
*9080
*13200
*14030
*14630
*14890
*11860
*9080
10170
9940
9150
8850
8790
*3890
*3660
*4100
*6080
*8850
*9290
*9300
*9410
*6510
*3890
*3660
*4100
5800
5630
5320
4930
4680
4590
Load Radius Over Side
*3240
*3800
*4170
*5260
*6560
6510
6460
*6240
*3230
3780
3830
3780
3640
3400
3130
2970
*3580
*4310
4650
4550
4450
2480
2440
2350
2210
2110
*3570
*2770
*2490
*2390
*2410
*2520
*2770
*3200
*3490
*3570
*2770
*2490
2080
1850
1760
1780
1920
2280
4.28
6.23
7.37
8.08
8.46
8.57
8.4
7.94
7.13
Load at Maximum Reach
* Limited by hydraulic rather than tipping load.
The above loads are in compliance with hydraulic excavator lift capacity ratings standard ISO 10567, they do not exceed 87% of hydraulic lifting capacity
or 75% of tipping capacity. Weight of all lifting accessories must be deducted from the above lifting capacities.
319C LN Hydraulic Excavator specifications
21
Standard Equipment
Standard equipment may vary. Consult your Caterpillar dealer for specifics.
Electrical
55 Ampere alternator
Light, storage box mounted (one)
Signaling / Warning horn
Caterpillar batteries (750 CCA)
Guards
Bottom guard
Track motor guards
Operator environment
Sound and vibration suppressed cab
with double wall cab shell
Bolt-on FOGS capability
Washable floor mat
Integrated joystick consoles and
suspended as part of seat arrangement
Each joystick with 3 auxiliary functions
and electrical wiring protection
Fully adjustable standard suspension
seat (KAB 525) :
Ergonomic design
Adjustable armrests and headrest
Four way adjustable (up-down,
front-rear)
Weight adjustment and retractable
seatbelt
Language display Multipro monitor:
Warning information
Filter/Fluid change information
Working hour information
Machine condition
Error code
Tool mode setting information and
prognostic
Start up level check for oil and
coolant
Full time clock (2 weeks after
shut off)
Cab windows:
Clear tinted tempered glass except
upper windshield: laminated glass
Front windshield split glass by 50/50
Openable front windshield upper &
lower with assist device
Rear window, emergency exit
Sliding upper door window
Polycarbonate skylight
22
Single windshield parallel wiper and
washer
Neutral lever lock out for all controls
Travel control pedals with removable
hand levers
Platform with provision for two
attachment control pedals
Dial-type throttle
Highly efficient ventilation system
Heater and defroster
Positive filtered ventilation,
pressurized cab
Radio mounting (DIN) on upper rear,
with wiring, antenna and provision
for 2 stereo speakers
Ashtray with lighter
Beverage holder, coat hook
Storage compartment suitable for lunch
box and literature holder
Utility space for magazines
Interior lighting
12V-5A Power supply
(Cigar lighter type socket)
Powertrain
Cat 3066 T diesel engine:
Low Emission, Low Noise version
24 volt electric starting and electrical
start aid
One touch low idle with AEC
Water separator in fuel line
Stage II emission package
Two speed travel with automatic shift
change
Straight line travel
Variable displacement, Negative Flow
Control hydraulic system
Undercarriage
Greased Lubricated Track
undercarriage:
500 mm triple grouser shoes
Hydraulic track adjuster
Idler-end track guiding guards
Center track guiding guards
Heavy Duty travel drives
Step group to meet EU regulations
319C LN Hydraulic Excavator specifications
Other standard equipment
Hydraulic cross sensing system
Auxiliary hydraulic valve
(high pressure)
Auto regeneration control for boom
and stick
Reverse swing damping valve
Automatic swing parking brake
Hydraulic cylinder snubbers
Boom and stick drift reducing valves
Caterpillar XT hoses
O-ring face seal couplings
Over heat prevention system
Hydraulic oil cooler
Partial firewall between pump
compartment and engine
Electronic Power Unit Control, with
internal diagnostic capabilities
Capability of auxiliary circuit
Capability of stackable valves for main
valve
Separate no-oil-drip hydraulic capsule
filter avoiding spills and
contamination during replacement
Scheduled Oil Sampling port
Remote greasing block
(boom, swing bearing)
Caterpillar Radial Seal Air Filter
Rearview mirrors, frame-right and
cab-left
Counterweight
Machine lifting point plate on
counterweight
Door and cap locks plus Caterpillar one
key security system
CE Mark package
Stage II package to meet EU Sound
regulation.
Optional Equipment
Optional equipment may vary. Consult your Caterpillar dealer for specifics.
Backhoe
Boom:
One-piece, with light, left side: 5.3 m
Variable Angle Boom
Stick:
3200 mm
2700 mm
2250 mm
1800 mm
Boom lowering check valve
Stick lowering check valve
Bucket linkage
Buckets and tips
CWTS Quick Coupler
Hydraulic attachments
Tear drop pin conversion
Bucket adjuster, B family
Electrical
Light:
boom, right side
working, cab mounted (two)
Travel alarm
Operator environment
Air conditioner, with automatic
climate control
Sun protective visor, windshield
Rain protective visor, windshield
Radio AM/FM, Tape recorder
Optional fully adjustable suspension
seat (KAB527):
higher back seat
adjustable integrated consoles heater
Headrest
Heating seat
Air suspension seat
Special comfort Packages
Undercarriage
Grease lubricated track with:
600 mm triple grouser shoes
500 mm heavy duty shoes
Hydraulics
High pressure auxiliary hydraulic
arrangements:
single function arrangement
combined function arrangement
(includes 2 pump flow capability)
two pump flow arrangement
High pressure auxiliary hydraulic lines
for boom and stick
Medium pressure hydraulic
arrangement
Medium pressure hydraulic lines for
boom and stick
Quick coupler hydraulic arrangement
Quick coupler hydraulic lines for boom
and stick
Clamshell actuator
Bio hydraulic oil package
Versatility package
Guards
Swivel guard
Falling objects guard
Bottom guard, heavy duty
Full length track guiding guard
Other attachments
250 kg additional counterweight
Track guiding guard
Cold weather starting kit, -32°C
Electric refueling pump
High ambient cooling (52°C),
meeting EU requirements
Swing out oil cooler
Caterpillar Product Link 201
Water separator with water level
indicator
Fine swing control
Converter 24-12V
Compartment storage with LID
Special paint
Services instructions
Consult your Caterpillar dealer for custom
product arrangements.
23
319C LN Hydraulic Excavator
www.CAT.com
HEHH3112-1 (06/2006) hr
Materials and specifications are subject to change without notice.
Featured machines in photos may include additional equipment.
See your Caterpillar dealer for available options.
© 2005 Caterpillar
All rights reserved
®
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertisement