Net Vision

Net Vision
Net Vision
Version 6.20
安装及操作手册
Installations- und bedienungsanleitung
Manual de instalación y uso
Manuel d’installation et d’utilisation
Installation and operating manual
Manuale di installazione e uso
Installatie– en bedieningshandleiding
Dokumentacja Techniczno-Ruchowa
Manual de instalação e funcionamento
Manual de instalare şi utilizare
Руководство по установке и эксплуатации
Navodila za priključitev in uporabo
Kurulum ve kullanım kılavuzu
CN
DE
ES
FR
GB
IT
NL
PL
PT
RO
RU
SI
TR
SUMMARY
1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.1. NET VISION PACKAGE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.2. NET VISION FUNCTIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
1.3. NET VISION RESOURCES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5
5
5
5
ENGLISH
2. SAFETY INFORMATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.1. FOR NET VISION CARD . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
2.2. FOR NET VISION BOX . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6
3. GENERAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.1. ETHERNET PROTOCOL COMPLIANCY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
3.2. BROWSER COMPLIANCY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7
4. INSTALLATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.1. CARD VERSION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
4.2. BOX VERSION (FOR UPS MODEL WITHOUT COM-SLOTS) . . . . . . . . . . . . . .
4.3. NET VISION BOOT SEQUENCE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5. IP ADDRESS CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.1. PREPARING NET VISION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.2. DEFAULT IP ADDRESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.3. NET VISION ACCESS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
5.4. IP SETTINGS USING NETWORK AND SUPGRADE UTILITY FOR WINDOWS PC .
5.5. IP SETTINGS USING NETWORK IF DHCP NOT PRESENT . . . . . . . . . . . . . .
5.6. IP SETTINGS USING A TERMINAL AND RS232 CONNECTION . . . . . . . . . . .
8
8
9
9
10
10
10
10
10
11
13
6. RESET NET VISION WITH FACTORY SETTINGS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14
7. USER INTERFACE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.1. INTRODUCTION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.2. NET VISION MENU GENERAL OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . .
7.3. EXTERNAL LINK . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
15
15
15
16
8. UPS MONITORING . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.1. COMPREHENSIVE VIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.2. UPS SYNOPTIC . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.3. RECTIFIER INPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.4. BATTERY . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.5. BYPASS INPUT. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.6. OUTPUT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.7. ALERT LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
8.8. CLIENT LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
17
17
18
21
21
21
21
21
21
9. UPS MANAGEMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.1. UPS CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.2. UPS CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.3. BATTERY TEST. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.4. POWERSHARE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.5. ECO MODE SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.6. WEEKLY SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.7. SPECIAL DAY SCHEDULE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.8. SHUTDOWN PARAMETERS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
9.9. EMD CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
22
22
22
22
23
23
23
23
23
25
10. NET VISION CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.1. QUICK OVERVIEW . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.2. DATE & TIME . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.3. NET VISION CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.4. NET VISION CONTROL . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.5. EMAIL RECIPIENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
10.6. WOL (WAKE-ON-LAN) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
26
26
27
27
27
28
29
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
3
SUMMARY
11. LOG FILES . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.1. HISTORY LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.2. EXTENDED HISTORY LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.3. UPS EVENT LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
11.4. NET VISION EVENT LOG . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
30
30
30
30
30
12. APPENDIX 1: LIST OF ALERTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 31
12.1. JBUSP ALERT LIST (NETYS - ITYS - MASTERYS - DELPHYS RANGES) . . . . 31
13. MODULYS GP / ITYS PRO ALERTS LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 32
14. APPENDIX 2: LIST OF UPS EVENTS STORED IN THE LOG FILE . . . . . . . . . . . . . . . . . . . 33
15. APPENDIX 3: LIST OF MEASUREMENTS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 34
16. APPENDIX 4: LIST OF NETVISION EVENTS STORED IN AGENT LOG. . . . . . . . . . . . . . . . 35
17. APPENDIX 5: SNMP OID TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
17.1. NET VISION MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 36
17.2. RFC1628 UPS MIB . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 38
18. TRAP LIST . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 39
18.1. SNMP V3 CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 40
19. APPENDIX 6: RADIUS CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.1. AUTHENTIFICATION CONFIGURATION . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.3. LOGIN. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
19.2. DOMAIN USER TABLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
41
41
42
42
20. NET VISION TECHNICAL SPECIFICATIONS. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
20.1. TECHNICAL SPECIFICATIONS . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
20.2. PIN ASSIGNMENT . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 43
4
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
1. INTRODUCTION
Net Vision is a network adapter for the professional monitoring and remote control of a single UPS or parallel UPS system.
The Net Vision network adaptor allows a UPS to connected directly the Ethernet network allowing secure management of the UPS
over the network using a web browser, a TELNET interface or NMS application via SNMP. The protocols used for connection are
independent of the platform and operating system, therefore Net Vision is extremely flexible and suitable for all systems.
ENGLISH
In addition to monitoring and control, the Net Vision interface is able to provide a high level of protection for servers powered by the UPS.
In critical conditions, up to 250 devices powered by the UPS can be switched off in an orderly sequence whilst ensuring data integrity.
The remote shutdown is provided by a client shutdown to be installed on all computers that require this automatic function. Some clients
for Net Vision are native to certain operating systems, otherwise a universal shutdown client (JNC) can be used.
Net Vision is compatible with the following Socomec UPS products:
• ITYS (all ranges)
• Netys PR and RT
• MASTERYS MC, BC, IP, IP +, EM and Green Power
• DELPHYS BC, MP, MX, EM and Green Power
• MODULYS GP 2.0
1.1. NET VISION PACKAGE
Card / BOX
• Cable
- RJ45 to DB9 Female serial cable for console operation (HyperTerminal session for example)
- RJ45 to DB9 Male UPS serial cable (BOX version only)
- Power supply (BOX version only)
• CD
- User manual
- MIB file
- Supgrade utility
- Last SOCOMEC Net Vision FW version
- Quickstart
- Link to SOCOMEC website download page.
1.2. NET VISION FUNCTIONS
• UPS monitoring via HTML pages and synoptic
• UPS control
• UPS event notification via email
• SNMP TRAP notification to NMS system (NET VISION and RFC1628 TRAP from version 6.1 and above)
• Server Shutdown (using JNC and VIRTUAL-JNC software agent on servers)
• Events and measurements log files
• Multi-language capabilities
1.3. NET VISION RESOURCES
NETWORK – Ethernet connection
• Internal card version with 10/100 auto-sense fast Ethernet.
COM - RS232 serial link
• For Terminal session to configure the Net Vision without Network connection
• Or to connect EMD external sensor with a standard Ethernet CAT5 cable.
DIP SWITCH
• Special functioning mode
• Reset Net Vision with factory settings (see special procedure to be followed)
• RESET button
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
5
2. SAFETY INFORMATION
2.1. FOR NET VISION CARD
• All servicing of this equipment must be performed by qualified service personnel. Remove rings, watches and other jewellery
before servicing the unit.
• Before plugging in/pulling out the Net Vision card to/from the UPS, please make sure that the power supplying the UPS has been
switched off. Hot swap of the Net Vision in UPS is inhibited.
2.2. FOR NET VISION BOX
• To reduce the risk of fire or electric shock, install the unit in a temperature-controlled indoor area free of conductive objects. Do
not place the unit near liquids or in an excessively humid environment.
• Do not allow liquids or foreign objects to enter the unit
• The unit does not contain any user-serviceable parts. Do not open the unit.
• All servicing of this equipment must be performed by qualified service personnel. Remove rings, watches and other jewellery
before servicing the unit.
• Before maintenance, repair or shipment, the unit must be switched off completely and unplugged and all connections removed.
• Before plugging in the Net Vision power adaptor, please make sure the power source rating matches the Net Vision power adaptor rating.
6
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
3. GENERAL SPECIFICATIONS
3.1. ETHERNET PROTOCOL COMPLIANCY
ENGLISH
• IPv4 / v6
• DHCP
• SNMP v1 / v3
• SSH – SSL 3.0 512b RSA key
• WOL
• HTTP
• SMTP (without SRA key encryption)
• NTP – ICMP
• SNTP - ICMP / DNS
• RADIUS
3.2. BROWSER COMPLIANCY
• Internet Explorer v9 and later
• SAFARI v4 – v5
• CHROME /chromium v16.0.9 (32/64bits)
• FIREFOX V4.0
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
7
4. INSTALLATION
4.1. CARD VERSION
4.1-1
100
10
Power
Status
ON
2 1
RESET
NETWORK
COM
NETYS – ITYS UPS
ITYS & NETYS UPS Serial link settings are preconfigured and cannot be changed:
Speed 9600* / bits 8 / parity NONE / Stop bit=1 / flow control NONE, JBUS/MODBUS slave = 1
(*) ITYS 6-10kVA has a speed of 2400. Change the speed on the Net Vision configuration page
4.1-2
Network
PC
MASTERYS MC / BC / GP / IP / IP+ / GREEN POWER 2.0
Insert Net Vision in Slot 1
UPS Serial link settings:
- Serial link settings: 9600, without parity
- Slave number = 1
Selection of serial port > 9600 / 8 / NONE
JBUS/MODBUS slave = 1
8
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
OFF
4. INSTALLATION
DELPHYS MP/MX RANGE
Insert in Slot 5 or Slot 6
UPS Serial link settings
Select the right COM port: Slot 5 = COM1 and Slot 6 = COM2
COM port settings: 9600 / 8 / NONE
ENGLISH
JBUS/MODBUS slave = 1
DELPHYS BC / GREEN POWER 2.0 RANGE
Insert Net Vision in upper slot 2
UPS Serial link settings
COM 2 selection on the mimic panel: 9600 / 8 / NONE
JBUS/MODBUS slave = 1
4.2. BOX VERSION (FOR UPS MODEL WITHOUT COM-SLOTS)
4.2-1
Network
PC
Power
adapter
OFF
Serial
UPS cable
4.3. NET VISION BOOT SEQUENCE
During NET VISION's starting phase, the green light will flash till communication is established.
NET VISION automatically detects the protocol and UPS type. Once the communication is established, the status light is continuous;
the MODBUS polling with UPS is running.
NET VISION manages 2 types of UPS mapping. APPENDIX 1 gives the lists of alert managed for both mappings.
'JBUSP' mapping for NETYS - ITYS - MASTERYS - DELPHYS: acronym with 2 numbers (A00 - A64)
'VU-MAP' mapping for MODULYS GP Green Power 2.0 range : acronym with 3 numbers (A000 - A127)
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
9
5. IP ADDRESS CONFIGURATION
5.1. PREPARING NET VISION
Once the UPS power is on and Net Vision has been installed in the slot and connected to the Network, the Net Vision's IP address
must be programmed.
5.2. DEFAULT IP ADDRESS
If a DHCP server is available on the same Network as Net Vision, the Net Vision will request a valid IP address from the server.If the
DHCP server is not available, Net Vision switches to this default IP address: 192.168.7.18
IPv6 is not activated by default. The default IP address is set to IPv4 format
5.3. NET VISION ACCESS
5.3-1
When the Net Vision has a valid IP address, open the web browser and enter the IP address set manually or given by the DHCP
server. IP address can be checked with Supgrade software
utility.
By default Net Vision requests the login and password to open
web pages.
This login and password remain the same for all connections
by default.
Login: admin
Password: public
TELNET and Terminal session only request the password to
access the settings pages.
5.4. IP SETTINGS USING NETWORK AND SUPGRADE UTILITY FOR
WINDOWS PC
1. Connect Net Vision to the NETWORK
2. Make sure Net Vision is powered by the UPS
3. Copy the Supgrade.exe utility from the CD to your PC (no installation required)
4. Run Supgrade.exe:
5.4-1
5. Click on
6. The Net Vision appears in the UPS list with its IP address.
10
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
5. IP ADDRESS CONFIGURATION
If the default address 192.168.7.18 is displayed, and DHCP is enabled, this means that Net Vision did not receive a valid address.
to refresh the list of devices.
Click again on
If the default address remains after 2 or 3 minutes, you will need to set the IP address via Terminal or TELNET. If more than one
Net Vision is present in the list, they must be distinguishable with their own MAC address.
Supgrade cannot change the IP address.
to open the web page with your default internet browser. By default Net Vision requests
ENGLISH
7. Net Vision access: Click on
the login and password.
WARNING!
If using other operating systems check the IP address via Terminal session.
WARNING!
If the DCHP setting has been changed from ‘disable’ (fixed IP address) to ‘enable’, RESTART Net Vision. Alternatively,
start communication with the DHCP server via the Net Vision control menu or the RESET button.
5.5. IP SETTINGS USING NETWORK IF DHCP NOT PRESENT
1. You need a computer with Terminal application connected to the same Network as Net Vision.
2. Check the IP address of your terminal
3. Run a terminal session (a DOS session for example)
4. Execute the following command:
ROUTE ADD 192.168.7.18 computer.IP.address
5.5-1
5. Test the connection to Net Vision
Ping 192.168.7.18
6. If the Net Vision responds to ping open a web session or TelNet session to modify IP parameters.
5.5-2
7. Run Telnet with default address
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
11
5. IP ADDRESS CONFIGURATION
5.5-3
Password: public.
Access to Net Vision IP Address configuration: Select 1 to enter the new IP address.
5.5-4
WARNING!
After modifying the IP address you will need to open a new session again with the new IP address given to Net Vision to
continue updating the settings.
If Telnet is not allowed due to security restrictions, it is also possible to use specific tools via SSHv1 or SSHv2. In this
case Telnet should be disabled.
12
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
5. IP ADDRESS CONFIGURATION
5.6. IP SETTINGS USING A TERMINAL AND RS232 CONNECTION
1. Connect the RS232/RJ45 PC cable from Net Vision to your computer
2. Open a Terminal session with the parameters assigned to the right COM port:
- 9600 bauds
- Parity none
ENGLISH
- 8 bits data
- No control
3. Press ‘space’ to open the communication.
4. Enter the password: public (by default)
5.6-1
The Terminal menus are the same as in the Telnet session. (See chapter above)
5.6-2
When the IP is set, open your web browser and enter the login and password to access the web pages.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
13
6. RESET NET VISION WITH FACTORY SETTINGS
The following procedure describes the steps to RESET all Net Vision settings and password to factory values.
NB: this procedure does not affect the data stored in the log files.
6-1
B
100
10
Power
A
Status
ON
2 1
RESET
NETWORK
Step 1:
Remove Network and COM cables
Step 2:
Remove the 2 screws
Step 3:
Remove Net Vision from the slot
Step 4:
Change the position of both DIP switches to ON (A)
COM
Step 5:
Put Net Vision back in the slot
Step 6:
Initialisation process starts, Status and Power LEDs flash. When initialisation process is completed (after 40 seconds)
Status and Power LEDs switch to ON (B).
Step 7:
Remove Net Vision from the Slot
Step 8:
Change the position of both DIP switches from ON to OFF (A)
Step 9:
Put Net Vision back in the slot. Net Vision will restart with factory settings.
Step 10: Fix Net Vision with both screws.
Step 11: Connect the Network and COM (if present) cables.
Step 12: Check that the DHCP server has kept the same IP address, or modify the IP address manually following the procedure
in the previous chapter.
If some Net Vision functions have been used before this procedure (eMail, SNMP, Shutdown, …), those functions will
need to reconfigured.
The RESET button does not affect the Net Vision settings, it only restarts Net Vision. Make sure that the IP given by
DHCP server remains the same as before the Net Vision RESET.
14
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
7. USER INTERFACE
7.1. INTRODUCTION
7.1-1
SOCOMEC
website link
Net Vision
reference
UPS model
Synoptic access
Net Vision
menu
ENGLISH
Language
access
HELP page
UPS
reference
Page title
7.2. NET VISION MENU GENERAL OVERVIEW
UPS Monitoring
Gives access to all UPS parameters available in Net Vision.
Each page describes a specific part of the UPS.
A dedicated page gives the list of current active alerts.
Client Table page lists all servers connected to Net Vision for Shutdown procedure.
UPS management
This menu contains specific sub-menus to control the behaviour of specific UPS functions. Not all menus are available for all UPS
models (consult the UPS user manual for the available functions).
UPS FUNCTIONS
Condition
UPS Controls
The remote controls have to be enabled by the UPS.
The controls enabled by the UPS are present in the list.
Super-user account necessary
Battery Test
The Battery Test function is enabled by the UPS.
YES
To send commands to the UPS
YES to send the Battery Test
control to the UPS
Power Share
The Power Share has to be managed by the UPS.
YES
Weekly Schedule
The UPS Standby Schedule is managed by the UPS.
YES
Special day Schedule
The UPS Standby Schedule is managed by the UPS.
YES
Eco mode Schedule
The eco mode management has to be managed by the UPS.
YES
Shutdown Parameters
Always present.
Weekly and Special Day Server shutdown schedules are present
if the UPS standby mode is managed by the UPS.
EMD events present only if the device is activated.
EMD Configuration
Always present
YES to modify the config
YES to activate the EMD if connected to Net Vision
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
15
7. USER INTERFACE
Net Vision management
• Protocol configuration
• Net Visions control
History Log
• Measurements log file
• UPS and Agent events log.
7.3. EXTERNAL LINK
An extra menu is present if devices have been activated. These links give direct access to other devices. It automatically opens a
new page in the web browser with the selected link.
16
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
8. UPS MONITOR
8.1. COMPREHENSIVE VIEW
8.1-1
ENGLISH
Only if 3-phase UPS
Only if 3-phase input UPS
Only if managed by UPS
Only if the EMD is connected
and activated
EMD input 1 (free text)
EMD input 2 (free text)
NOTE! Output kVA is added to this table if this measurement is available on UPS.
UPS STATUS DETAILS
Unknown
If no communication with UPS
Check the communication settings in the UPS or modify
communication settings in Net Vision configuration page
Imminent Stop
Inverter in Imminent Stop for overload, over temperature or battery
low detection.
Depends on UPS model
On Maintenance
UPS in maintenance mode
Depends on UPS model
On maintenance
bypass
Load supplied by maintenance
bypass (internal or external)
Only if the maintenance bypass breaker is present in the UPS
Battery discharging
UPS on battery
Occurs if the Input supply is absent, or during the Battery Test.
Battery Test running
Displayed during the test
UPS on Standby
UPS on, load not supplied
Depends on UPS model
Load on bypass
Load on mains
The load is not protected by UPS
Eco mode
Eco mode activated
If eco mode enabled
Normal mode
Load on mains
Only for Off line UPS
On Inverter
Load protected by Inverter
Normal mode for ON LINE UPS
UPS Off
Load not supplied
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
17
8. UPS MONITOR
HELP MENU
Click on the icon to open the HELP page.
8.1-2
From HELP page click on the icon
to go back to the web page.
This function is available for all Net Vision pages.
8.2. UPS SYNOPTIC
Click on the icon to open the synoptic page.
8.2-1
From synoptic page click on the icon
18
1
0
to go back to the comprehensive view.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
8. UPS MONITOR
SINGLE UNIT
ENGLISH
8.2-2
FLOW DISPLAY
GREY: means not powered
BLUE: means under power.
BATTERY DISPLAY
8.2-3
Green lines: indicate the battery level:
4th line: > 95 %
3rd line: > 90 %
2nd line: > 85 %
1st line: <=85 %
Yellow lines: indicate the battery discharging.
Yellow Battery means battery alert flagged, or battery low / discharged.
LOAD DSIPLAY
8.2-4
The lines inside the tank represent the level of UPS load rate.
Above 100% the lines are yellow. 1 line = 10 % from 30% to 120 %
Above 120% the lines are red.
SUBSET DISPLAY
Green sinusoid symbol (Inverter/Bypass) or DC (Rectifier) symbol means the subset is ON
Yellow sinusoid symbol (Inverter/Bypass) or DC (Rectifier) symbol means the subset is ON and an alert has been flagged.
STATUS BAR DISPLAY
The colour of the bar indicates the status of the UPS.
GREEN: Normal mode / eco mode. Load protected by UPS
YELLOW: On bypass / maintenance bypass / preventive maintenance requested
RED:
Load OFF / Imminent Stop
GREY:
UPS on standby. Load not supplied.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
19
8. UPS MONITOR
ADDITIONAL ICONS
8.2-5
Bypass impossible
PARALLEL SYSTEM
8.2-6
Click on the UNIT button
(1 to 6) to switch to UNIT VIEW
8.2-7
Click on the SYS button
to go back to SYSTEM VIEW.
The colour of the button indicates the status of the unit:
GREEN:
Unit working (On inverter / On bypass)
YELLOW: Unit alert flagged (General unit alert flagged)
20
RED:
Unit OFF (Unit output off)
GREY:
Unit on Standby
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
Alert present
8. UPS MONITOR
UPS WITHOUT BYPASS – CONVERTER MODE
The Bypass path is not displayed in this configuration.
The Bypass monitor page is empty, no data is available.
Measurements not managed are not displayed. The line of values is removed.
ENGLISH
MODULAR UNIT
In the case of modular unit UPS architecture, it is possible to see the module's comprehensive view.
Click on the 'module page' button to open the module tables window. These tables are the same as the unit's comprehensive view.
The page only displays the modules or subunits present in the unit.
8.3. RECTIFIER INPUT
See help page for more info
The min and max values are stored in the UPS Extend Log
8.4. BATTERY
Battery Status:
- Unknown (no communication with UPS)
- Battery discharged
- Battery disconnected
- Battery low
- Battery not OK
- Battery discharging
- Battery OK
See help page for more info
8.5. BYPASS INPUT
See help page for more info
In the case of a UPS without Bypass or converter mode, the page is empty.
8.6. OUTPUT
Output Status:
- Unknown (no communication with UPS)
- On maintenance Bypass
- On standby
- On Bypass
- Eco mode
- Normal mode (Only for OFF LINE UPS)
- On Inverter
- UPS OFF
See help page for more info
8.7. ALARM TABLE
See help page for more info
See Appendix for alert list managed by Net Vision
8.8. CLIENT TABLE
See help page for more info
The severity column is not managed.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
21
9. UPS MANAGEMENT
9.1. UPS CONFIGURATION
See help page for more info
9.2. UPS CONTROL
Menu present if remote controls are set on UPS and Super-user account session open.
Example: Only controls enabled by UPS are present on the page.
9.2-1
Select one control option and confirm.
If Power Share plugs are managed by UPS, the output plug controls are displayed on the same page.
9.2-2
List of possible control options (depending on UPS capabilities)
• Standby ON
• Standby OFF
• Eco Mode
• Normal Mode
• On Bypass
• On Inverter
• Alarm Reset
• Buzzer OFF
WARNING!
Some controls are not available with some UPS units.
After sending a command to the UPS, the page is not refreshed with new data. It is advisable to refresh the page
manually with the latest list of commands available.
9.3. BATTERY TEST
Present only if the Battery Test is enabled by UPS.
The Administrator account is needed to send the Battery Test command.
The Battery Status is notified and the last Battery Test result displayed:
• Processing
• Failed
• Waiting (Battery Test schedule enabled by the UPS)
• Not active (test never performed or Battery Test disabled by the UPS)
• OK
See help page for more details.
22
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
9. UPS MANAGEMENT
9.4. POWERSHARE
Present only if Power Share is managed by UPS.
Net Vision allows you to control the Power Share plugs according to the UPS events or measurements.
ENGLISH
9.4-1
MODE SETTINGS
Battery Capacity: switches the output plug to OFF when the value is reached.
Remaining Backup time: switches the output plug to OFF when the value is reached.
Time on Battery: switches the output plug to OFF when the value is reached.
Emergency lighting: switches the output plug to ON when the UPS is on battery.
See help page for more details.
9.5. ECO MODE SCHEDULE
Present only if eco mode is enabled by UPS. See help page for more details.
9.6. WEEKLY SCHEDULE
Present only if the standby schedule is enabled. See help page for more details.
9.7. SPECIAL DAY SCHEDULE
Present only if the standby schedule is enabled. See help page for more details.
9.8. SHUTDOWN PARAMETERS
Net Vision allows you to send notification and shutdown commands to servers. The shutdown agent has to be installed on each
server. The Net Vision IP address should be set in the agent configuration. If the server is recognised by NET VISON, it will be present
in the Client Table page of the UPS monitor menu.
UPS SHUT OFF
This function is available if the Standby Schedule is managed by the UPS. Otherwise this function is not displayed.
The UPS shut-off command is sent to the UPS when the Net Vision sends the shutdown command to the server. This command is
sent with the time period set for this function. The UPS will turns off the output at the end of the time period.
The restart delay defines the time period after which the UPS should restart automatically after mains power resumes. A restart time
set to 0 means that the UPS will not restart.
WARNING!
Make sure that the UPS shut-off time period is longer than the total time period for the shutdown procedure for the
servers and workstations supplied by the UPS. See shutdown process paragraph for more details
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
23
9. UPS MANAGEMENT
SHUTDOWN EVENT SELECTION
• AC Failed (UPS on battery)
• Battery Low
• UPS Overload
• UPS over Temperature
• On By-pass
• Imminent Stop
• Level of battery capacity (the value of the level has to be set in the Net Vision configuration page)
Additional events if EMD device present:
• EMD Temperature
• EMD Humidity
• EMD IN1 Abnormal
• EMD IN2 Abnormal
SHUTDOWN TEST PROCEDURE
Net Vision allows you to simulate an AC fail event. After a 2nd validation the Shutdown procedure starts, with the settings of ‘AC fail’ event.
Net Vision sends the notification and the shutdown command to the server.
At the end of the procedure, after sending the shutdown command, Net Vision waits around 2 minutes before sending a shutdown cancel
command. This command permits the agent to recover normal UPS status. The agent is then ready for the shutdown procedure again.
During the test the button is disabled and switches to 'enabled' when the ‘shutdown cancel’ command is sent to servers.
WARNING!
If the time period = 0, the server shutdown command is sent immediately.
Example of the sequence stored in the Agent log file. 1 minute time period and warning every 10 seconds.
9.8-1
24
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
9. UPS MANAGEMENT
SHUTDOWN PROCESS
Principle: When a shutdown event occurs, Net Vision sends a first notification to all servers at the end of the 1st warning period. A
time period set to 0 means immediately.
While the event is present Net Vision sends notification regularly, defined by ‘Warning interval’. At the end of the ‘event delay’ period
Net Vision sends the shutdown command to the servers.
ENGLISH
9.8-2
9.9. EMD CONFIGURATION
If an EMD device (environment and temperature sensor) is connected to Net Vision, you will need to activate it.
The EMD should be connected to Net Vision COM port. EMD values are not transferred to the UPS.
9.9-1
CUSTOMISATION
Temperature and humidity measurements and two inputs can be assigned as required.
THRESHOLDS
The MIN and MAX thresholds define the tolerances. If the value is out of tolerance, Net Vision will send an email, SNMP TRAP or
server shutdown command, depending on the Net Vision settings. The offset can compensate the value with a reference value.
ALERT MODE
Defines whether or not the EMD inputs are flagged as an alert in ‘Normally Open’ or ‘Normally Closed’ position.
For more details refer to HELP page.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
25
10. NET VISION CONFIGURATION
10.1. QUICK OVERVIEW
Net Vision configuration
Functions
Date & Time
Manages the Net Vision real time clock. Net - Manual
Vision is also able to synchronise the UPS clock. - NTP server
- Synchronise with computer
- Synchronise UPS
Net Vision Config
Includes all NETWORK configuration needed - IP v4 or v6
for Net Vision.
- SMTP server
- SMTP port (25 by default) from 6.1 version only
- email account authentication
- Super-user account
- Log file samples
- UPS serial link
- System identification
Net Vision Control
Enable or disable protocols.
Log file managements
eMail Receivers with
Super-user account only
Defines the events, and outlines the addresses - Event Selection
of eMail recipients.
- Free text field
- eMail address table
- send Test
SNMPv3 USM Table
Defines the user name and password for SNMP Only present if SNMP v3 enabled
encryption
SNMP TRAP Receivers
List of NMS, up to 8 maximum
SNMP/HTTP Control
Defines the access with specific computer, read - IP address
or read/write
- Community
Also includes the User domain for specific use. - Access
Home page Refresh
Makes it possible to change the refresh period
for UPS monitoring web pages
WakeOnLan Targets
Describes the list of servers to wake when the - Server MAC address (32 max)
UPS output is powered.
- Delay
- Retry number
RADIUS Configuration
This function allows user access management - RADIUS Server
via RADIUS server.
- Privacy policy
See APPENDIX.
- Packet management
External Link
Allows the addition of hyperlinks to other devices - Hyperlink (up to 4)
in the NET VISON page.
- Description
- Enabled/disabled
The following chapters give additional info about Net Vision configurations.
For more details see the HELP pages.
26
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
Settings
- DHCP
- Telnet
- FTP (upgrade)
- SNMP
- SSH
- HTTP
- Log file reset
- Log file download
- MIB access
- IP address
- TRAP TYPE : NET VISION TRAP or RFC1628
TRAP (from version 6.1 and above)
10. NET VISION CONFIGURATION
10.2. DATE & TIME
UPS DATE AND TIME
Net Vision allows the synchronisation of the UPS date and time. When Net Vision detects a new date and time (set manually or via
NTP server), it sends the new values to the UPS if this function is enabled.
This function is enabled if the date and time are managed by the UPS. Otherwise this part is not displayed.
ENGLISH
[Update Now] sends the current date and time to the UPS manually.
DATE AND TIME SETTINGS
Synchronise with computer where the web browser is open
Synchronise with NTP server
Set values manually.
Net Vision also manages the time zone; GMT + [x] hours.
For more details refer to HELP page.
10.3. NET VISION CONFIGURATION
SYSTEM IDENTIFICATION
3 free fields (Contact - Name - Location) to identify Net Vision. This info is not reported to the UPS or other functions.
EMAIL MANAGEMENT
Net Vision allows you to send eMails on specific events. ‘First send delay’ (in minutes) means that Net Vision waits until the end of
the delay to send the eMail if the event is still present. 0 = email sent immediately
‘eMail send interval’ (in minutes) defines Net Vision email resending after a period, if the event is still present. 0 = no repetition.
WARNING!
NET VISION is not able to manage email accounts with the 1024/2048 SRA encrypton key.
HISTORY LOG
Defines the sample period that Net Vision stores the measurements.
‘History Log Interval’ stores the measurements with a period defined in seconds
‘Extended History Log Interval’ stores measurements and statistics with a period defined in minutes.
UPS SERIAL LINK
Net Vision communicates via RS232 serial link with the UPS.
The UPS serial port settings should be the same as Net Vision.
WARNING!
If communication problems occur, it will be necessary to adapt the ‘Net Vision Polling Rate’ and ‘JBUS Timeout’.
10.4. NET VISION CONTROL
SNMP TRAP FILTER
It activates or deactivates the following TRAP (Enabled = RFC1628 compliant):
upsTrapOnBattery: send every minute with remaining backup time and time on battery
upsTrapAlarmEntryAdded: send with the WellKnownAlarms OID for the recognised alert
upsTrapAlarmEntryRemoved: send with the WellKnownAlarms OID for the recognised alert
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
27
10. NET VISION CONFIGURATION
10.5. EMAIL RECEIVERS
EVENT MANAGEMENT
10.5-1
Event 1: General Alert.
Events 5 to 8 are linked to the EMD device managed if the device is connected to Net Vision.
Events 7 and 8 Display the configured sensor name.
Event 11: Load on Bypass.
Event 13: Alert cancelled.
Events 2,3,4,9,10,12: UPS alerts.
SEND TEST
Tests e-mail configuration.
WARNING!
Before sending a test you will need to configure the SMTP server and account.
28
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
10. NET VISION CONFIGURATION
MAIL FORMAT
10.5-2
ENGLISH
Net Vision account: UPS reference.
Event List: lists of active alerts.
Timestamp: time when Net Vision detects the event
and hyperlink for NET VISION's IP address.
10.6. WOL (WAKE-ON-LAN)
A pop-up window is opened to set the MAC address and the delay before sending the packet to server.
10.6-1
The WOL packets are sent to servers when Net Vision detects that UPS output is powered by the inverter or bypass
again, and the UPS has no active alerts.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
29
11. HISTORY LOG
11.1. HISTORY LOG
Net Vision stores the following measurements:
• Input Voltage per phase
• Output Voltage per phase
• Global output load rate
• Battery capacity
• EMD temperature (if EMD device present)
• EMD humidity (if EMD device present)
The sample period (in seconds) is defined on the Net Vision configuration page.
Net Vision manages the log file by period. One page gives the measurement sample for the period.
11.2. UPS EXTENDED LOG
Net Vision stores the History log measurements plus statistics such as Min, Average and Max for each measurement.
The sample period (in minutes) is defined on the Net Vision configuration page.
Net Vision manages the log file by period. One page gives the measurement sample for the period.
11.3. UPS EVENT LOG
Net Vision stores the UPS events.
See Appendix.
11.4. AGENT EVENTS LOG
Net Vision stores the agent event and sending of UPS commands.
See Appendix.
30
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
12. APPENDIX 1: LIST OF ALERTS
NOTE! Alerts and status without acronym are managed by NET VISION itself
12.1. JBUSP ALERT LIST (NETYS - ITYS - MASTERYS - DELPHYS RANGES)
Mimic panel message
JBUSP code
Mimic panel message
A01
Battery Alarm
A24
Boost general alarm
S05
Load on Battery
A25
Inverter general alarm
S15
Low Battery
A26
Battery charger general alarm
S16
Battery discharged/Battery end
A27
Output voltage over limits
A07
Inside over-temperature alarm
A28
Output voltage under limits
A05
Input voltage out of tolerance
A29
By-Pass general alarm
A03
Output voltage out of tolerance
A30
UPS stopped for overload
A02
UPS overload
A31
Imminent Stop
S04
Load on Mains/Load on By-Pass
A32
Unit 1 general alarm
A29
By-Pass general alarm
A33
Unit 2 general alarm
Output Off as Requested
A34
Unit 3 general alarm
UPS Off as Requested
A35
Unit 4 general alarm
Battery charger general alarm
A36
Unit 5 general alarm
A26
S08
UPS in standby mode
A37
Unit 6 general alarm
UPS Off
A38
External Alarm 1
A00
General Alarm
A39
External Alarm 2
S14
Battery Test failed (interrupted)
A40
External Alarm 3
Communication Lost
A41
External Alarm 4
Awaiting Power
A42
Remote service alarm
Shutdown Pending
A43
Redundancy lost
Shutdown Imminent
A44
Periodic service check up
S10
Battery Test in progress
A45
Automatic and manual transfer disabled
A04
Digital Power Supply Fault
A46
Automatic transfer disabled
A06
Auxiliary mains out of tolerance
A47
Battery room alarm
A08
Manual bypass closed
A48
Manual bypass alarm
A09
Short-circuit detection on UPS output
A49
Battery Discharged
A10
Battery charger fault
A50
Insufficient resources
A11
Inverter over-current
A51
Optional boards general alarm
A12
Excessive Inverter distortion
A52
Rectifier fault
A13
Precharge voltage out of tolerance
A53
Boost fault
A14
Boost output voltage too low
A54
Inverter fault
A15
Boost output voltage too high
A55
Parallel module fault
A16
Battery voltage too high
A56
Gen-set general alarm
A17
Improper condition of use
A57
Gen-set fault
A18
Blocking Inverter for overload
A58
Emergency stop active
A19
Microprocessor control system failure
A59
Battery circuit open
A20
Wrong configuration
A60
Fans failure
A21
Pll Fault
A61
Phase rotation fault
A22
Input mains general alarm
A62
Bypass fault
A23
Rectifier general alarm
ENGLISH
JBUSP code
Additional Status on the alert monitoring page:
S04
Load on Bypass
S14
Battery Test fault
S08
UPS in standby
S15
Battery low
S16
Battery discharged
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
31
13. MODULYS GP / ITYS PRO ALERTS LIST
Code
Code
Mimic panel message
A027
Battery Alarm
A049
By-Pass general alarm
A019
Load on Battery
A000
Imminent Stop
A018
Low Battery
A096
Unit 1 general alarm
A017
Battery discharged/Battery end
A097
Unit 2 general alarm
A002
Inside over-temperature alarm
A098
Unit 3 general alarm
A035
Input voltage out of tolerance
A099
Unit 4 general alarm
A001
UPS overload
A100
Unit 5 general alarm
S002
Load on Mains/Load on By-Pass
A101
Unit 6 general alarm
A049
By-Pass general alarm
A064
External Alarm 1
Output Off as Requested
A065
External Alarm 2
UPS Off as Requested
A066
External Alarm 3
A037
Battery charger general alarm
A067
External Alarm 4
S013
UPS in standby mode
A013
Remote service alarm
S004
UPS Off
A006
Redundancy lost
A015
General Alarm
A012
Periodic service check up
Battery test failed (interrupted)
A003
Automatic and manual transfer disabled
Communication Lost
A004
Automatic transfer disabled
Awaiting Power
A021
Battery room alarm
Shutdown Pending
A056
Manual bypass alarm
Shutdown Imminent
A017
Battery Discharged
S034
Battery test in progress
A005
Insufficient resources
A050
Auxiliary mains out of tolerance
A062
Optional boards general alarm
S003
Manual bypass closed
A032
Rectifier fault
A007
Short-circuit detection on UPS output
A040
Inverter fault
A036
Battery charger fault
A036
Gen-set general alarm
A061
Microprocessor control system failure
A059
Emergency stop active
A060
Wrong configuration
A016
Battery circuit open
A035
Input mains general alarm
A051
Phase rotation fault
A033
Rectifier general alarm
A048
Bypass fault
A020
Battery temperature
A022
Battery test failed
A102
Unit 7 General Alarm
A103
Unit 8 General alarm
A034
Rectifier redundancy alarm
A042
Inverter redundancy alarm
A041
Inverter general alarm
A037
Battery charger general alarm
A034
32
Mimic panel message
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
Mains Failure
External Alarm 3 ON
Mains Restored
External Alarm 3 OFF
Inverter ON
External Alarm 4 ON
Inverter OFF
External Alarm 4 OFF
Rectifier ON
Unknown
Rectifier OFF
JBUS Error: Bad function code
Load On Inverter
JBUS Error: Bad Address
Load On Mains
JBUS Error: Bad CRC
Load Not Supplied
JBUS Error: Function not supported
Battery Discharging
JBUS Error: Unknow
Battery Charging
Power Plugs 1 ON
eco mode ON
Power Plugs 2 ON
eco mode OFF
Power Plugs 3 ON
Standby Mode ON
Power Plugs 4 ON
Standby Mode OFF
Power Plugs 1 OFF
Battery Test in progress
Power Plugs 2 OFF
Battery Test finish
Power Plugs 3 OFF
Low Battery
Power Plugs 4 OFF
Battery discharged
EMD Sensor detected high temperature
Battery failure
EMD Sensor detected normal temperature
Boost ON
EMD Sensor detected low temperature
Boost OFF
EMD Sensor detected high humidity
Auxiliary Mains Failure
EMD Sensor detected normal humidity
Auxiliary Mains Restored
EMD Sensor detected low humidity
External Status 1 ON
EMD %s input is active
External Status 1 OFF
EMD %s input is restored
External Status 2 ON
Gen Set Running
External Status 2 OFF
Gen Set Stopped
ENGLISH
14. APPENDIX 2: LIST OF UPS EVENTS STORED IN THE
LOG FILE
External Status 3 ON
External Status 3 OFF
External Status 4 ON
External Status 4 OFF
PLL fault
Recitifier Alarm
Boost Alarm
Inverter Alarm
Battery Charger Alarm
By-Pass Alarm
External Alarm 1 ON
External Alarm 1 OFF
External Alarm 2 ON
External Alarm 2 OFF
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
33
15. APPENDIX 3: LIST OF MEASUREMENTS
HTML page
Comprehensive view
Rectifier Input
Battery
UPS Output
Bypass Input
Measurements
Unit
Output Load Rate
%
Output
kVA
Output Voltage
V *10
Battery Capacity
%
Battery Voltage
V * 10
Rectifier Input Voltage
V * 10
Temperature
°C
Rectifier input Voltage
V * 10
Rectifier Input Frequency
Hz * 10
Battery Volatge
V * 10
Battery Capacity
Ah * 10
Battery Capacity
%
Remaining backup time
mn
Time since on Battery Power
s
UPS load rate
%
Ouput Voltage
V * 10
Output Frequency
Hz * 10
Output Current
A * 10
Bypass Voltage
V* 10
Bypass Frequency
Hz * 10
NOTE!
If measurements are not present in NET VISION pages, it means that the measurments are not managed by the UPS.
34
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
16. APPENDIX 4: LIST OF NETVISION EVENTS STORED
IN AGENT LOG
Cold boot
Warm boot
Network link up
Network link down
Time Changed
ENGLISH
Net Vision Restart
Parameters reset to default
Parameters chcecksum error
Clear history log
Firmware upgrade
History log cleared
Extent history log cleared
UPS event log cleared
Agent event log cleared
History log interval changed
Extent history log interval changed
Send shutdown warning to clients
Send shutdown request to clients
Send UPS shutdown command to UPS
Send shutdown cancel to clients
Send UPS output on command to UPS
UPS communication lost
UPS communication restored
Time changed by user
Time changed by server
Time changed by RTC
Enable Eco/Mode
Disable Eco/Mode
Enable Standby
Disable Standby
Reset ALarms
Reset Commands
Set Buzzer Off
eMail server or DNS fault
eMail retry to send
A email had been sent
eMail send error
eMail address error
SMTP authorization fail
The configured NTP server is not responding
Clear Customized Language
Enable By-Pass
Disable By-Pass
Wake On LAN packet sent to clients
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
35
17. APPENDIX 5: SNMP OID TABLE
17.1. NET VISION MIB
upsIdentModel
[1.3.6.1.4.1.4555.1.1.1.1.1.1.0]
upsBypassVoltage
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.2.2]
upsIdentUPSFirmwareVersion
[1.3.6.1.4.1.4555.1.1.1.1.1.2.0]
upsBypassVoltage
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.2.3]
upsIdentAgentSoftwareVersion
[1.3.6.1.4.1.4555.1.1.1.1.1.3.0]
upsBypassCurrent
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.3.1]
upsIdentUpsSerialNumber
[1.3.6.1.4.1.4555.1.1.1.1.1.4.0]
upsBypassCurrent
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.3.2]
upsBatteryStatus
[1.3.6.1.4.1.4555.1.1.1.1.2.1.0]
upsBypassCurrent
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.3.3]
upsSecondsOnBattery
[1.3.6.1.4.1.4555.1.1.1.1.2.2.0]
upsAlarm
[1.3.6.1.4.1.4555.1.1.1.1.6]
upsEstimatedMinutesRemaining
[1.3.6.1.4.1.4555.1.1.1.1.2.3.0]
upsAlarmPresent
[1.3.6.1.4.1.4555.1.1.1.1.6.1]
upsEstimatedChargeRemaining
[1.3.6.1.4.1.4555.1.1.1.1.2.4.0]
upsAlarmTable
[1.3.6.1.4.1.4555.1.1.1.1.6.2.]
upsBatteryVoltage
[1.3.6.1.4.1.4555.1.1.1.1.2.5.0]
upsAlarmEntry
[1.3.6.1.4.1.4555.1.1.1.1.6.2.1]
upsInputNumLines
[1.3.6.1.4.1.4555.1.1.1.1.3.1.0]
upsAlarmId
[1.3.6.1.4.1.4555.1.1.1.1.6.2.1.1]
upsInputFrequency
[1.3.6.1.4.1.4555.1.1.1.1.3.2.0]
upsAlarmDescr
[1.3.6.1.4.1.4555.1.1.1.1.6.2.1.2]
upsInputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.1.1]
upsAlarmTime
[1.3.6.1.4.1.4555.1.1.1.1.6.2.1.3]
upsInputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.1.2]
upsAlarmExtDes
[1.3.6.1.4.1.4555.1.1.1.1.6.2.1.4]
upsInputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.1.3]
upsWellKnownAlarms
[1.3.6.1.4.1.4555.1.1.1.1.6.3]
upsInputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.2.1]
upsAlarmBatteryBad
1.3.6.1.4.1.4555.1.1.1.1.6.3.1
upsInputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.2.2]
upsAlarmOnBattery
1.3.6.1.4.1.4555.1.1.1.1.6.3.2
upsInputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.2.3]
upsAlarmLowBattery
1.3.6.1.4.1.4555.1.1.1.1.6.3.3
upsInputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.3.1]
upsAlarmDepletedBattery
1.3.6.1.4.1.4555.1.1.1.1.6.3.4
upsInputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.3.2]
upsAlarmTempBad
1.3.6.1.4.1.4555.1.1.1.1.6.3.5
upsInputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.3.3]
upsAlarmInputBad
1.3.6.1.4.1.4555.1.1.1.1.6.3.6
upsInputVoltageMax
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.4.1]
upsAlarmOutputBad
1.3.6.1.4.1.4555.1.1.1.1.6.3.7
upsInputVoltageMax
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.4.2]
upsAlarmOutputOverload
1.3.6.1.4.1.4555.1.1.1.1.6.3.8
upsInputVoltageMax
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.4.3]
upsAlarmOnBypass
1.3.6.1.4.1.4555.1.1.1.1.6.3.9
upsInputVoltageMin
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.5.1]
upsAlarmBypassBad
1.3.6.1.4.1.4555.1.1.1.1.6.3.10
upsInputVoltageMin
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.5.2]
upsAlarmOutputOffAsRequested
1.3.6.1.4.1.4555.1.1.1.1.6.3.11
upsInputVoltageMin
[1.3.6.1.4.1.4555.1.1.1.1.3.3.1.5.3]
upsAlarmUpsOffAsRequested
1.3.6.1.4.1.4555.1.1.1.1.6.3.12
[1.3.6.1.4.1.4555.1.1.1.1.4.1.0]
upsAlarmChargerFailed
1.3.6.1.4.1.4555.1.1.1.1.6.3.13
upsOutputFrequency
[1.3.6.1.4.1.4555.1.1.1.1.4.2.0]
upsAlarmUpsOutputOff
1.3.6.1.4.1.4555.1.1.1.1.6.3.14
upsOutputNumLines
[1.3.6.1.4.1.4555.1.1.1.1.4.3.0]
upsAlarmUpsSystemOff
1.3.6.1.4.1.4555.1.1.1.1.6.3.15
upsOutputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.1.1]
upsAlarmFanFailure
1.3.6.1.4.1.4555.1.1.1.1.6.3.16
upsOutputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.1.2]
upsAlarmFuseFailure
1.3.6.1.4.1.4555.1.1.1.1.6.3.17
upsOutputLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.1.3]
upsAlarmGeneralFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.18
upsOutputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.2.1]
upsAlarmDiagnosticTestFailed
1.3.6.1.4.1.4555.1.1.1.1.6.3.19
upsOutputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.2.2]
upsAlarmCommunicationLost
1.3.6.1.4.1.4555.1.1.1.1.6.3.20
upsOutputVoltage
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.2.3]
upsAlarmAwaitingPower
1.3.6.1.4.1.4555.1.1.1.1.6.3.21
upsOutputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.3.1]
upsAlarmShutdownPending
1.3.6.1.4.1.4555.1.1.1.1.6.3.22
upsOutputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.3.2]
upsAlarmShutdownImminent
1.3.6.1.4.1.4555.1.1.1.1.6.3.23
upsOutputCurrent
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.3.3]
upsAlarmTestInProgress
1.3.6.1.4.1.4555.1.1.1.1.6.3.24
upsOutputPercentLoad
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.4.1]
upsAlarmPowerSupplyFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.25
upsOutputPercentLoad
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.4.2]
upsAlarmAuxMainFail
1.3.6.1.4.1.4555.1.1.1.1.6.3.26
upsOutputPercentLoad
[1.3.6.1.4.1.4555.1.1.1.1.4.4.1.4.3]
upsAlarmManualBypassClose
1.3.6.1.4.1.4555.1.1.1.1.6.3.27
upsBypassFrequency
[1.3.6.1.4.1.4555.1.1.1.1.5.1.0]
upsAlarmShortCircuit
1.3.6.1.4.1.4555.1.1.1.1.6.3.28
upsBypassNumLines
[1.3.6.1.4.1.4555.1.1.1.1.5.2.0]
upsAlarmBatteryChargerFailure
1.3.6.1.4.1.4555.1.1.1.1.6.3.29
upsBypassLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.1.1]
upsAlarmInverterOverCurrent
1.3.6.1.4.1.4555.1.1.1.1.6.3.30
upsBypassLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.1.2]
upsAlarmInverterDistorsion
1.3.6.1.4.1.4555.1.1.1.1.6.3.31
upsBypassLineIndex
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.1.3]
upsAlarmPrechargeVoltageFail
1.3.6.1.4.1.4555.1.1.1.1.6.3.32
upsBypassVoltage
[1.3.6.1.4.1.4555.1.1.1.1.5.3.1.2.1]
upsAlarmBoostTooLow
1.3.6.1.4.1.4555.1.1.1.1.6.3.33
upsOutputSource
36
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
17. APPENDIX 5: SNMP OID TABLE
1.3.6.1.4.1.4555.1.1.1.1.6.3.34
upsAlarmA63
1.3.6.1.4.1.4555.1.1.1.1.6.3.82
upsAlarmBatteryTooHigh
1.3.6.1.4.1.4555.1.1.1.1.6.3.35
upsAlarmModule7Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.83
upsAlarmImproperCondition
1.3.6.1.4.1.4555.1.1.1.1.6.3.36
upsAlarmModule8Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.84
upsAlarmOverloadTimeout
1.3.6.1.4.1.4555.1.1.1.1.6.3.37
upsAlarmBatteryTemperature
1.3.6.1.4.1.4555.1.1.1.1.6.3.85
upsAlarmControlSystemFailure
1.3.6.1.4.1.4555.1.1.1.1.6.3.38
upsAlarmRecRedundancy
1.3.6.1.4.1.4555.1.1.1.1.6.3.86
upsAlarmDataCorrupted
1.3.6.1.4.1.4555.1.1.1.1.6.3.39
upsAlarmInvRedundancy
1.3.6.1.4.1.4555.1.1.1.1.6.3.87
upsAlarmPllFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.40
upsAlarmInputGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.41
upsAlarmRectifierGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.42
upsAlarmBoostGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.43
upsAlarmInverterGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.44
upsAlarmBatteryGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.45
upsAlarmOutputOver
1.3.6.1.4.1.4555.1.1.1.1.6.3.46
upsAlarmOutputUnder
1.3.6.1.4.1.4555.1.1.1.1.6.3.47
upsAlarmBypassGeneralAlarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.48
upsAlarmStopForOverload
1.3.6.1.4.1.4555.1.1.1.1.6.3.49
upsAlarmImminentStop
1.3.6.1.4.1.4555.1.1.1.1.6.3.50
upsAlarmModule1Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.51
upsAlarmModule2Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.52
upsAlarmModule3Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.53
upsAlarmModule4Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.54
upsAlarmModule5Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.55
upsAlarmModule6Alarm
1.3.6.1.4.1.4555.1.1.1.1.6.3.56
upsAlarmExternalAlarm1
1.3.6.1.4.1.4555.1.1.1.1.6.3.57
upsAlarmExternalAlarm2
1.3.6.1.4.1.4555.1.1.1.1.6.3.58
upsAlarmExternalAlarm3
1.3.6.1.4.1.4555.1.1.1.1.6.3.59
upsAlarmExternalAlarm4
1.3.6.1.4.1.4555.1.1.1.1.6.3.60
upsAlarmEService
1.3.6.1.4.1.4555.1.1.1.1.6.3.61
upsAlarmRedundancyLost
1.3.6.1.4.1.4555.1.1.1.1.6.3.62
upsAlarmPeriodicServiceCheck
1.3.6.1.4.1.4555.1.1.1.1.6.3.63
upsAlarmAllTransferDisabled
1.3.6.1.4.1.4555.1.1.1.1.6.3.64
upsAlarmAutoTransferDisabled
1.3.6.1.4.1.4555.1.1.1.1.6.3.65
upsAlarmBatteryRoom
1.3.6.1.4.1.4555.1.1.1.1.6.3.66
upsAlarmManualBypass
1.3.6.1.4.1.4555.1.1.1.1.6.3.67
upsAlarmBatteryDischarged
1.3.6.1.4.1.4555.1.1.1.1.6.3.68
upsAlarmInsufficientResources
1.3.6.1.4.1.4555.1.1.1.1.6.3.69
upsAlarmOptionalBoards
1.3.6.1.4.1.4555.1.1.1.1.6.3.70
upsAlarmRectifierFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.71
upsAlarmBoostFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.72
upsAlarmInverterFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.73
upsAlarmParallelModuleFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.74
upsAlarmGenSetGeneral
1.3.6.1.4.1.4555.1.1.1.1.6.3.75
upsAlarmGenSetFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.76
upsAlarmEmergencyStopActive
1.3.6.1.4.1.4555.1.1.1.1.6.3.77
upsAlarmBatteryCircuitOpen
1.3.6.1.4.1.4555.1.1.1.1.6.3.78
upsAlarmFansFailure
1.3.6.1.4.1.4555.1.1.1.1.6.3.79
upsAlarmPhaseRotationFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.80
upsAlarmBypassFault
1.3.6.1.4.1.4555.1.1.1.1.6.3.81
ENGLISH
upsAlarmBoostTooHigh
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
37
17. APPENDIX 5: SNMP OID TABLE
17.2. RFC1628 UPS MIB
NOTE: RFC1628 is only available with NetVision firmware version 6.2.
upsIdentManufacturer
38
[1.3.6.1.2.1.33.1.1.1.0]
upsOutputPercentLoad
[1.3.6.1.2.1.33.1.4.4.1.5.2]
upsIdentModel
[1.3.6.1.2.1.33.1.1.2.0]
upsOutputPercentLoad
[1.3.6.1.2.1.33.1.4.4.1.5.3]
upsIdentUPSSoftwareVersion
[1.3.6.1.2.1.33.1.1.3.0]
upsBypassFrequency
[1.3.6.1.2.1.33.1.5.1.0]
upsIdentAgentSoftwareVersion
[1.3.6.1.2.1.33.1.1.4.0]
upsBypassNumLines
[1.3.6.1.2.1.33.1.5.2.0]
upsIdentName
[1.3.6.1.2.1.33.1.1.5.0]
upsBypassLineIndex
[1.3.6.1.2.1.33.1.5.3.1.1.1]
upsIdentAttachedDevices
[1.3.6.1.2.1.33.1.1.6.0]
upsBypassLineIndex
[1.3.6.1.2.1.33.1.5.3.1.1.2]
upsBatteryStatus
[1.3.6.1.2.1.33.1.2.1.0]
upsBypassLineIndex
[1.3.6.1.2.1.33.1.5.3.1.1.3]
upsSecondsOnBattery
[1.3.6.1.2.1.33.1.2.2.0]
upsBypassVoltage
[1.3.6.1.2.1.33.1.5.3.1.2.1]
upsEstimatedMinutesRemaining
[1.3.6.1.2.1.33.1.2.3.0]
upsBypassVoltage
[1.3.6.1.2.1.33.1.5.3.1.2.2]
upsEstimatedChargeRemaining
[1.3.6.1.2.1.33.1.2.4.0]
upsBypassVoltage
[1.3.6.1.2.1.33.1.5.3.1.2.3]
upsBatteryVoltage
[1.3.6.1.2.1.33.1.2.5.0]
upsBypassCurrent
[1.3.6.1.2.1.33.1.5.3.1.3.1]
upsBatteryCurrent
[1.3.6.1.2.1.33.1.2.6.0]
upsBypassCurrent
[1.3.6.1.2.1.33.1.5.3.1.3.2]
upsBatteryTemperature
[1.3.6.1.2.1.33.1.2.7.0]
upsBypassCurrent
[1.3.6.1.2.1.33.1.5.3.1.3.3]
upsInputLineBads
[1.3.6.1.2.1.33.1.3.1.0]
upsBypassPower
[1.3.6.1.2.1.33.1.5.3.1.4.1]
upsInputNumLines
[1.3.6.1.2.1.33.1.3.2.0]
upsBypassPower
[1.3.6.1.2.1.33.1.5.3.1.4.2]
upsInputLineIndex
[1.3.6.1.2.1.33.1.3.3.1.1.1]
upsBypassPower
[1.3.6.1.2.1.33.1.5.3.1.4.3]
upsInputLineIndex
[1.3.6.1.2.1.33.1.3.3.1.1.2]
upsAlarmsPresent
[1.3.6.1.2.1.33.1.6.1.0]
upsInputLineIndex
[1.3.6.1.2.1.33.1.3.3.1.1.3]
upsAlarmEntry
[1.3.6.1.2.1.33.1.6.2.1.0]
upsInputFrequency
[1.3.6.1.2.1.33.1.3.3.1.2.1]
upsAlarmId
[1.3.6.1.2.1.33.1.6.2.1.1.0]
upsInputFrequency
[1.3.6.1.2.1.33.1.3.3.1.2.2]
upsAlarmDescr
[1.3.6.1.2.1.33.1.6.2.1.2.0]
upsInputFrequency
[1.3.6.1.2.1.33.1.3.3.1.2.3]
upsAlarmTime
[1.3.6.1.2.1.33.1.6.2.1.3.0]
upsInputVoltage
[1.3.6.1.2.1.33.1.3.3.1.3.1]
upsAlarmBatteryBad
[1.3.6.1.2.1.33.1.6.3.1.0]
upsInputVoltage
[1.3.6.1.2.1.33.1.3.3.1.3.2]
upsAlarmOnBattery
[1.3.6.1.2.1.33.1.6.3.2.0]
upsInputVoltage
[1.3.6.1.2.1.33.1.3.3.1.3.3]
upsAlarmLowBattery
[1.3.6.1.2.1.33.1.6.3.3.0]
upsInputCurrent
[1.3.6.1.2.1.33.1.3.3.1.4.1]
upsAlarmDepletedBattery
[1.3.6.1.2.1.33.1.6.3.4.0]
upsInputCurrent
[1.3.6.1.2.1.33.1.3.3.1.4.2]
upsAlarmTempBad
[1.3.6.1.2.1.33.1.6.3.5.0]
upsInputCurrent
[1.3.6.1.2.1.33.1.3.3.1.4.3]
upsAlarmInputBad
[1.3.6.1.2.1.33.1.6.3.6.0]
upsInputTruePower
[1.3.6.1.2.1.33.1.3.3.1.5.1]
upsAlarmOutputBad
[1.3.6.1.2.1.33.1.6.3.7.0]
upsInputTruePower
[1.3.6.1.2.1.33.1.3.3.1.5.2]
upsAlarmOutputOverload
[1.3.6.1.2.1.33.1.6.3.8.0]
upsInputTruePower
[1.3.6.1.2.1.33.1.3.3.1.5.3]
upsAlarmOnBypass
[1.3.6.1.2.1.33.1.6.3.9.0]
upsOutputSource
[1.3.6.1.2.1.33.1.4.1.0]
upsAlarmBypassBad
[1.3.6.1.2.1.33.1.6.3.10.0]
upsOutputFrequency
[1.3.6.1.2.1.33.1.4.2.0]
upsAlarmOutputOffAsRequested
[1.3.6.1.2.1.33.1.6.3.11.0]
upsOutputNumLines
[1.3.6.1.2.1.33.1.4.3.0]
upsAlarmUpsOffAsRequested
[1.3.6.1.2.1.33.1.6.3.12.0]
upsOutputLineIndex
[1.3.6.1.2.1.33.1.4.4.1.1.1]
upsAlarmChargerFailed
[1.3.6.1.2.1.33.1.6.3.13.0]
upsOutputLineIndex
[1.3.6.1.2.1.33.1.4.4.1.1.2]
upsAlarmUpsOutputOff
[1.3.6.1.2.1.33.1.6.3.14.0]
upsOutputLineIndex
[1.3.6.1.2.1.33.1.4.4.1.1.3]
upsAlarmUpsSystemOff
[1.3.6.1.2.1.33.1.6.3.15.0]
upsOutputVoltage
[1.3.6.1.2.1.33.1.4.4.1.2.1]
upsAlarmFanFailure
[1.3.6.1.2.1.33.1.6.3.16.0]
upsOutputVoltage
[1.3.6.1.2.1.33.1.4.4.1.2.2]
upsAlarmFuseFailure
[1.3.6.1.2.1.33.1.6.3.17.0]
upsOutputVoltage
[1.3.6.1.2.1.33.1.4.4.1.2.3]
upsAlarmGeneralFault
[1.3.6.1.2.1.33.1.6.3.18.0]
upsOutputCurrent
[1.3.6.1.2.1.33.1.4.4.1.3.1]
upsAlarmDiagnosticTestFailed
[1.3.6.1.2.1.33.1.6.3.19.0]
upsOutputCurrent
[1.3.6.1.2.1.33.1.4.4.1.3.2]
upsAlarmCommunicationsLost
[1.3.6.1.2.1.33.1.6.3.20.0]
upsOutputCurrent
[1.3.6.1.2.1.33.1.4.4.1.3.3]
upsAlarmAwaitingPower
[1.3.6.1.2.1.33.1.6.3.21.0]
upsOutputPower
[1.3.6.1.2.1.33.1.4.4.1.4.1]
upsAlarmShutdownPending
[1.3.6.1.2.1.33.1.6.3.22.0]
upsOutputPower
[1.3.6.1.2.1.33.1.4.4.1.4.2]
upsAlarmShutdownImminent
[1.3.6.1.2.1.33.1.6.3.23.0]
upsOutputPower
[1.3.6.1.2.1.33.1.4.4.1.4.3]
upsAlarmTestInProgress
[1.3.6.1.2.1.33.1.6.3.24.0]
upsOutputPercentLoad
[1.3.6.1.2.1.33.1.4.4.1.5.1]
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
18. TRAP LIST
TRAP
Management
Remarks
1
upsTrapOnBattery
Send remaining backup battery running TRAP enabled if TRAP FILTER =
time each minute.
Disabled on Net Vision Control web page
2
upsTrapTestCompleted
NOT MANAGED
3
upsTrapAlarmEntryAdded
TRAP sent each time a new active TRAP enabled if TRAP FILTER =
alert is added to the list. Includes the Disabled on Net Vision Control web page
upsWellKnownAlarms OID.
4
upsTrapAlarmEntryRemoved
TRAP sent each time an active alert is TRAP enabled if TRAP FILTER =
removed from the list.
Disabled on Net Vision Control web page
5
upsTrapUpsNormal
6
upsTrapUpsBattTestFailed
7
upsTrapOnBatteryPower
8
upsTrapBatteryLow
9
upsTrapPowerRestored
10
upsTrapImminentStop
11
upsTrapTurned Off
12
upsTrapOverTemperature
13
upsTrapOverload
14
upsTrapOnMains
15
upsTrapRedoundancyLost
16
upsTrapOnBattery
17
upsTrapTestCompleted
18
upsTrapAlarmEntryAdded
19
upsTrapAlarmEntryRemoved
20
upsTrapUpsNormal
21
upsTrapUpsBattTestFailed
22
upsTrapOnBatteryPower
23
upsTrapBatteryLow
24
upsTrapPowerRestored
25
upsTrapImminentStop
26
upsTrapTurnedOff
27
upsTrapOverTemperature
28
upsTrapOverload
29
upsTrapOnMains
30
upsTrapRedoundancyLost
31
upsTrapEmdTempLow
32
upsTrapEmdTempNotLow
33
upsTrapEmdTempHigh
34
upsTrapEmdTempNotHigh
35
upsTrapEmdHumidityLow
36
upsTrapEmdHumidityNotLow
37
upsTrapEmdHumidityHigh
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
ENGLISH
TRAP
number
39
18. TRAP LIST
TRAP
number
TRAP
38
upsTrapEmdHumidityNotHigh
39
upsTrapEmdFirstInputActive
40
upsTrapEmdFirstInputRestored
41
upsTrapEmdSecondInputActive
42
upsTrapEmdSecondInputRestored
Management
Remarks
NOTE: RFC1628 only manages trap 1 to 4.
18.1. SNMP V3 CONFIGURATION
When SNMP V3 has been enabled by NET VISION the 'SNMPv3 USM Table' item is added to the NET VISION configuration menu.
This table manages up to 4 users. For each user it is necessary to select the encryption security level, (without, only authentication/
no private, or authentication and private), and the authentication coding key: HMAC-MD5 or HMAC-SHA.
Those configurations have to be set in the same manner by the NMS software. Once the NET VISION has established the connection
with NMS, the status of the user switches to "Ready" in the USM table.
See HTML help page for more details.
40
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
19. APPENDIX 6: RADIUS CONFIGURATION
19.1. AUTHENTIFICATION CONFIGURATION
ENGLISH
19.1-1
1. UDP Port: This parameter dsiplays the RADIUS protocol port.
2. Primary Server: Primary radius server IP or domain name.
3. Secondary Server: Backup radius server IP or domain name. If the radius server is not backed up the parameter can remain blank.
4. Share Secret of Primary Server: This parameter is used to transmit an encryption password between Net Vision and primary radius
server. This value must be the same as primary radius server setting.
5. Share Secret of Secondary Server: This parameter is used to transmit an encryption password between Net Vision and secondary
radius server. This value must be the same as secondary radius server setting. If the radius server is not backed up the parameter
can remain blank.
6. Packet Timeout Interval: When radius server does not respond within time interval authentication packet will be re-sent. This
parameter range is 1 to 3.
7. Packet Retry Times: When radius server does not respond authentication request re-sent according to packet retry times. This
parameter range is 1 to 4.
If you do not have a secondary radius server, you can only set “Primary Server” and “Share Secret of Primary Server”.
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
41
19. APPENDIX 6: RADIUS CONFIGURATION
19.2. DOMAIN USER TABLE
1. User Name: this parameter is used to set the user's name. User Name must be defined in the radius server.
2. Access Type: Defines user's level of acess. The user can be allowed to modify the system configuration, by setting Access Type
to 'Read/Write'.
19.2-2
HTTP(S) AUTHENTIFICATION
Refer to Net Vision Control page.
1. Local User: Only supports local user login.
2. RADIUS: Only supports radius user login.
3. Both: Local user and radius user can both log in.
19.3. LOGIN
Enter username and password in RADIUS Table
If HTTP(s) Authentification type is RADIUS or Both, you can use radius user to log in.
42
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
20. NET VISION TECHNICAL SPECIFICATIONS
20.1. TECHNICAL SPECIFICATIONS
CPU
16-bits AC1107 Fast Ethernet RISC Processor Phoenix Kernel
Memory
2 MB (1Mbit x 16) TFBGA Flash ROM
Serial Communication
Two UART Channels, one RJ-45, one Gold finger.
LAN Controller
10/100 Mbits Ethernet controller
Network Connection
10/100 TX RJ-45 jack connector
RTC
Real time clock
Network Protocol
SNMP over UDP/IP
ENGLISH
2 MB (1Mbit x 16) SDRAM
HTTP over TCP/IP
ARP, TFTP, SSH, SSL , NTP and ICMP
Supported MIB
SOCOMEC UPS MIB
Operating Temperature
0 ~ 40 °C
Operating Humidity
10 ~ 80 %
Power Input
8-15 V DC
Power Consumption
3.0 Watts Maximum
Dimensions
130 x 60 x 18,2 mm (L x W x H)
Weight
70 g
Regulatory compliance
FCC class B
CE class B
20.2. PIN ASSIGNMENT
Bottom Side
Component Side
Pin 1
GND
Pin 2
DC (8-15V)
Pin 3
Txd > UPS
Pin 4
Rxd > UPS
Pin 5
NC
Pin 6
NC
Pin 7
NC
Pin 8
Short to pin 10
Pin 9
GND
Pin 10
Short to pin 8
Pin 11~25
NC
Pin 12~26
NC
Net Vision Version 6.20 - Ref.: IOMNETVIXX01-GB 02
43
Socomec worldwide
IN EUROPE
IN ASIA PACIFIC
IN MIDDLE EAST
BELGIUM
PORTUGAL
AUSTRALIA
UNITED ARAB EMIRATES
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +32 2 340 02 30
Fax +32 2 346 28 99
info.be@socomec.com
UPS / Solar
Tel.+351 261 812 599
Fax +351 261 812 570
info.ups.pt@socomec.com
UPS
Tel. +61 2 9325 3900
Fax +61 2 9888 9544
info.ups.au@socomec.com
ROMANIA
CHINA
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel.+971 4 29 98 441
Fax +971 4 29 98 449
info.ae@socomec.com
FRANCE
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +40 21 319 36 88
Fax +40 21 319 36 89
info.ro@socomec.com
UPS / Power Control & Energy Efficiency
Tel. +86 21 52 98 95 55
Fax +86 21 62 28 34 68
info.cn@socomec.com
RUSSIA
Power Control & Energy Efficiency
Tel. +91 124 4027210
Fax +91 124 4562738
info.scp.in@socomec.com
836}6RODU
Tel. +91 44 39215400
Fax +91 44 39215450 & 51
info.ups.in@socomec.com
info.solar.in@socomec.com
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +33 1 45 14 63 00
Fax +33 1 48 67 31 12
dcm.ups.fr@socomec.com
GERMANY
Power Control & Energy Efficiency
Tel. +49 7243 65292 0
Fax +49 7243 65292 13
info.scp.de@socomec.com
UPS
Tel. +49 621 71 68 40
Fax +49 621 71 68 444
info.ups.de@socomec.com
ITALY
Power Control & Energy Efficiency
Tel.+39 02 98 49 821
Fax +39 02 98 24 33 10
info.scp.it@socomec.com
Solar
Tel. +39 0444 598611
Fax +39 0444 598627
info.solar.it@socomec.com
UPS
Tel.+39 02 98 242 942
Fax +39 02 98 240 723
info.ups.it@socomec.com
NETHERLANDS
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +31 30 760 0900
Fax +31 30 637 2166
info.nl@socomec.com
POLAND
Power Control & Energy Efficiency
Tel. +48 91 442 64 11
Fax +48 91 442 64 19
info.scp.pl@socomec.com
UPS
Tel. +48 22 825 73 60
Fax. +48 22 825 73 60
info.ups.pl@socomec.com
HEAD OFFICE
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +7 495 775 19 85
Fax +7 495 775 19 85
info.ru@socomec.com
SLOVENIA
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +386 1 5807 860
Fax +386 1 561 11 73
info.si@socomec.com
SPAIN
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +34 93 540 75 75
Fax +34 93 540 75 76
info.es@socomec.com
UNITED KINGDOM
Power Control & Energy Efficiency
Tel. +44 1462 440 033
Fax +44 1462 431 143
info.scp.uk@socomec.com
UPS
Tel.+44 1285 863 300
Fax+44 1285 862 304
info.ups.uk@socomec.com
INDIA
SINGAPORE
UPS / Power Control & Energy Efficiency
Tel.+65 6506 7600
Fax +65 64 58 7377
info.sg@socomec.com
THAILAND
UPS
Tel. +66 2 941 1644 7
Fax +66 2 941 1650
info.ups.th@socomec.com
IN AMERICA
USA, CANADA & MEXICO
Power Control & Energy Efficiency
Tel. +1 617 245 0447
Fax +1 617 245 0437
info.us@socomec.com
OTHER COUNTRIES
NORTH AFRICA
Algeria / Morocco / Tunisia
info.naf@socomec.com
AFRICA
Other countries
info.africa@socomec.com
SOUTH EUROPE
Cyprus / Greece / Israel / Malta
info.se@socomec.com
SOUTH AMERICA
Tel. +34 93 540 75 75
info.es@socomec.com
VIETNAM
MORE DETAILS
UPS
Tel. +84 8 3559 1220
Fax +84 8 3559 1221
info.ups.vn@socomec.com
www.socomec.com/worldwide
TURKEY
8363RZHU&RQWURO(QHUJ\(IILFLHQF\}
Solar
Tel. +90 216 540 71 20-21-22
Fax +90 216 540 71 27
info.tr@socomec.com
YOUR DISTRIBUTOR
SOCOMEC GROUP
S.A. SOCOMEC capital 10 816 800€
R.C.S. Strasbourg B 548 500 149
B.P. 60010 - 1, rue de Westhouse
F-67235 Benfeld Cedex - FRANCE
Tel. +33 3 88 57 41 41
Fax +33 3 88 74 08 00
info.scp.isd@socomec.com
www.socomec.com
*IOMNETVIXX01-GB 02*
IOMNETVIXX01-GB
02
02.2015
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising