MT07 MT07A - Lawrence Photographic

MT07 MT07A - Lawrence Photographic
Read this manual carefully before operating this vehicle.
OWNER’S MANUAL
MT07
MT07A
1WS-28199-E1
[English (E)]
DIC183
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
EAU50921
Read this manual carefully before operating this vehicle. This manual should stay with this vehicle if it is sold.
YAMAHA MOTOR ELECTRONICS CO., LTD.
1450-6, Mori, Mori-machi, Shuchi-gun, Shizuoka-ken, 437-0292 Japan
DECLARATION of CONFORMITY
We
Company: YAMAHA MOTOR ELECTRONICS CO., LTD.
Address: 1450-6, Mori, Mori-Machi, Shuchi-gun, Shizuoka-Ken, 437-0292 Japan
Hereby declare that the product:
Kind of equipment: IMMOBILIZER
Type-designation: 5SL-00
is in compliance with following norm(s) or documents:
R&TTE Directive(1999/5/EC)
EN300 330-2 v1.3.1(2006-01), EN300 330-2 v1.5.1(2010-02)
EN60950-1:2006/A11:2009
Two or Three-Wheel Motor Vehicles Directive(97/24/EC: Chapter 8, EMC)
Place of issue: Shizuoka, Japan
Date of issue: 1 Aug. 2002
Revision record
No.
Contents
To change contact person and integrate type-designation.
1
Version up the norm of EN60950 to EN60950-1
2
To change company name
3
4
Date
9 Jun. 2005
27 Feb. 2006
1 Mar. 2007
version up of the following norm:
• EN300 330-2 v1.1.1 to EN300 330-2 v1.3.1 and EN300 330-2 v1.5.1 8 Jul. 2010
• EN60950-1:2001 to EN60950-1:2006/A11:2009
General manager of quality assurance div.
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
INTRODUCTION
EAU10103
Welcome to the Yamaha world of motorcycling!
As the owner of the MT07/MT07A, you are benefiting from Yamaha’s vast experience and newest technology regarding the
design and manufacture of high-quality products, which have earned Yamaha a reputation for dependability.
Please take the time to read this manual thoroughly, so as to enjoy all advantages of your MT07/MT07A. The Owner’s Manual does not only instruct you in how to operate, inspect and maintain your motorcycle, but also in how to safeguard yourself
and others from trouble and injury.
In addition, the many tips given in this manual will help keep your motorcycle in the best possible condition. If you have any
further questions, do not hesitate to contact your Yamaha dealer.
The Yamaha team wishes you many safe and pleasant rides. So, remember to put safety first!
Yamaha continually seeks advancements in product design and quality. Therefore, while this manual contains the most current product information available at the time of printing, there may be minor discrepancies between your motorcycle and
this manual. If there is any question concerning this manual, please consult a Yamaha dealer.
EWA10032
WARNING
Please read this manual carefully and completely before operating this motorcycle.
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
IMPORTANT MANUAL INFORMATION
EAU10134
Particularly important information is distinguished in this manual by the following notations:
This is the safety alert symbol. It is used to alert you to potential personal injury
hazards. Obey all safety messages that follow this symbol to avoid possible injury
or death.
WARNING
A WARNING indicates a hazardous situation which, if not avoided, could result in
death or serious injury.
NOTICE
A NOTICE indicates special precautions that must be taken to avoid damage to the
vehicle or other property.
TIP
A TIP provides key information to make procedures easier or clearer.
*Product and specifications are subject to change without notice.
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
IMPORTANT MANUAL INFORMATION
EAU10201
MT07/MT07A
OWNER’S MANUAL
©2013 by Yamaha Motor Co., Ltd.
1st edition, November 2013
All rights reserved.
Any reprinting or unauthorized use
without the written permission of
Yamaha Motor Co., Ltd.
is expressly prohibited.
Printed in Japan.
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
TABLE OF CONTENTS
SAFETY INFORMATION .................. 1-1
DESCRIPTION .................................. 2-1
Left view ......................................... 2-1
Right view....................................... 2-2
Controls and instruments ............... 2-3
INSTRUMENT AND CONTROL
FUNCTIONS...................................... 3-1
Immobilizer system......................... 3-1
Main switch/steering lock............... 3-2
Indicator lights and warning
lights............................................ 3-3
Multi-function meter unit ................ 3-6
Handlebar switches...................... 3-13
Clutch lever .................................. 3-14
Shift pedal .................................... 3-14
Brake lever.................................... 3-14
Brake pedal .................................. 3-15
ABS (for ABS models) .................. 3-15
Fuel tank cap................................ 3-16
Fuel............................................... 3-17
Fuel tank breather hose and
overflow hose............................ 3-18
Catalytic converter ....................... 3-19
Seats ............................................ 3-19
Helmet holding cable.................... 3-21
Storage compartment .................. 3-22
Adjusting the shock absorber
assembly ................................... 3-23
Luggage strap holders ................. 3-24
Sidestand ......................................3-24
Ignition circuit cut-off system .......3-25
Auxiliary DC connector .................3-27
FOR YOUR SAFETY –
PRE-OPERATION CHECKS .............4-1
OPERATION AND IMPORTANT
RIDING POINTS ................................5-1
Starting the engine..........................5-1
Shifting ............................................5-2
Tips for reducing fuel
consumption................................5-3
Engine break-in ...............................5-3
Parking ............................................5-4
PERIODIC MAINTENANCE AND
ADJUSTMENT...................................6-1
Owner’s tool kit ...............................6-2
Periodic maintenance chart for the
emission control system..............6-3
General maintenance and
lubrication chart...........................6-4
Checking the spark plugs ...............6-8
Engine oil and oil filter cartridge......6-9
Coolant..........................................6-11
Replacing the air filter element
and cleaning the check hose.....6-14
Checking the throttle grip free
play ............................................6-15
Valve clearance .............................6-15
Tires .............................................. 6-15
Cast wheels .................................. 6-18
Adjusting the clutch lever free
play............................................ 6-18
Checking the brake lever free
play............................................ 6-19
Brake light switches ..................... 6-19
Checking the front and rear brake
pads .......................................... 6-20
Checking the brake fluid level ...... 6-21
Changing the brake fluid .............. 6-22
Drive chain slack........................... 6-22
Cleaning and lubricating the drive
chain.......................................... 6-24
Checking and lubricating the
cables........................................ 6-25
Checking and lubricating the
throttle grip and cable ............... 6-25
Checking and lubricating the
brake and shift pedals............... 6-25
Checking and lubricating the
brake and clutch levers ............. 6-26
Checking and lubricating the
sidestand................................... 6-27
Lubricating the rear suspension ... 6-27
Lubricating the swingarm
pivots......................................... 6-27
Checking the front fork................. 6-28
Checking the steering................... 6-28
Checking the wheel bearings ....... 6-29
Battery .......................................... 6-29
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
TABLE OF CONTENTS
Replacing the fuses.......................6-31
Replacing the headlight bulb.........6-32
Tail/brake light...............................6-34
Replacing a turn signal light
bulb ............................................6-34
Replacing the license plate light
bulb ............................................6-35
Replacing the auxiliary light
bulb ............................................6-36
Supporting the motorcycle............6-36
Front wheel
(for non-ABS models).................6-37
Rear wheel
(for non-ABS models).................6-39
Troubleshooting ............................6-41
Troubleshooting charts .................6-42
MOTORCYCLE CARE AND
STORAGE ..........................................7-1
Matte color caution .........................7-1
Care .................................................7-1
Storage ............................................7-3
SPECIFICATIONS..............................8-1
CONSUMER INFORMATION............9-1
Identification numbers.....................9-1
INDEX...............................................10-1
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
SAFETY INFORMATION
EAU1028B
1
Be a Responsible Owner
As the vehicle’s owner, you are responsible for the safe and proper operation of your motorcycle.
Motorcycles are single-track vehicles.
Their safe use and operation are dependent upon the use of proper riding
techniques as well as the expertise of
the operator. Every operator should
know the following requirements before riding this motorcycle.
He or she should:
 Obtain thorough instructions from
a competent source on all aspects
of motorcycle operation.
 Observe the warnings and maintenance requirements in this Owner’s Manual.
 Obtain qualified training in safe
and proper riding techniques.
 Obtain professional technical service as indicated in this Owner’s
Manual and/or when made necessary by mechanical conditions.
 Never operate a motorcycle without proper training or instruction.
Take a training course. Beginners
should receive training from a certified instructor. Contact an authorized motorcycle dealer to find out
about the training courses nearest
you.
Safe Riding
Perform the pre-operation checks
each time you use the vehicle to make
sure it is in safe operating condition.
Failure to inspect or maintain the vehicle properly increases the possibility of
an accident or equipment damage.
See page 4-1 for a list of pre-operation
checks.
 This motorcycle is designed to
carry the operator and a passenger.
 The failure of motorists to detect
and recognize motorcycles in traffic is the predominating cause of
automobile/motorcycle accidents.
Many accidents have been
caused by an automobile driver
who did not see the motorcycle.
Making yourself conspicuous ap1-1
pears to be very effective in reducing the chance of this type of
accident.
Therefore:
• Wear a brightly colored jacket.
• Use extra caution when you are
approaching
and
passing
through intersections, since intersections are the most likely
places for motorcycle accidents
to occur.
• Ride where other motorists can
see you. Avoid riding in another
motorist’s blind spot.
• Never maintain a motorcycle
without proper knowledge.
Contact an authorized motorcycle dealer to inform you on basic motorcycle maintenance.
Certain maintenance can only
be carried out by certified staff.
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
SAFETY INFORMATION
 Many accidents involve inexperienced operators. In fact, many operators who have been involved in
accidents do not even have a current motorcycle license.
• Make sure that you are qualified
and that you only lend your motorcycle to other qualified operators.
• Know your skills and limits.
Staying within your limits may
help you to avoid an accident.
• We recommend that you practice riding your motorcycle
where there is no traffic until you
have become thoroughly familiar with the motorcycle and all of
its controls.
 Many accidents have been
caused by error of the motorcycle
operator. A typical error made by
the operator is veering wide on a
turn due to excessive speed or undercornering (insufficient lean angle for the speed).
• Always obey the speed limit and
never travel faster than warranted by road and traffic conditions.
• Always signal before turning or
changing lanes. Make sure that
other motorists can see you.
 The posture of the operator and
passenger is important for proper
control.
• The operator should keep both
hands on the handlebar and
both feet on the operator footrests during operation to maintain control of the motorcycle.
• The passenger should always
hold onto the operator, the seat
strap or grab bar, if equipped,
with both hands and keep both
feet on the passenger footrests.
Never carry a passenger unless
he or she can firmly place both
feet on the passenger footrests.
 Never ride under the influence of
alcohol or other drugs.
 This motorcycle is designed for
on-road use only. It is not suitable
for off-road use.
1-2
Protective Apparel
The majority of fatalities from motorcycle accidents are the result of head injuries. The use of a safety helmet is the
single most critical factor in the prevention or reduction of head injuries.
 Always wear an approved helmet.
 Wear a face shield or goggles.
Wind in your unprotected eyes
could contribute to an impairment
of vision that could delay seeing a
hazard.
 The use of a jacket, heavy boots,
trousers, gloves, etc., is effective
in preventing or reducing abrasions or lacerations.
 Never wear loose-fitting clothes,
otherwise they could catch on the
control levers, footrests, or wheels
and cause injury or an accident.
 Always wear protective clothing
that covers your legs, ankles, and
feet. The engine or exhaust system become very hot during or after operation and can cause
burns.
 A passenger should also observe
the above precautions.
1
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
SAFETY INFORMATION
1
Avoid Carbon Monoxide Poisoning
All engine exhaust contains carbon
monoxide, a deadly gas. Breathing
carbon monoxide can cause headaches, dizziness, drowsiness, nausea,
confusion, and eventually death.
Carbon Monoxide is a colorless, odorless, tasteless gas which may be present even if you do not see or smell any
engine exhaust. Deadly levels of carbon monoxide can collect rapidly and
you can quickly be overcome and unable to save yourself. Also, deadly levels of carbon monoxide can linger for
hours or days in enclosed or poorly
ventilated areas. If you experience any
symptoms of carbon monoxide poisoning, leave the area immediately, get
fresh air, and SEEK MEDICAL TREATMENT.
 Do not run engine indoors. Even if
you try to ventilate engine exhaust
with fans or open windows and
doors, carbon monoxide can rapidly reach dangerous levels.
 Do not run engine in poorly ventilated or partially enclosed areas
such as barns, garages, or carports.
 Do not run engine outdoors where
engine exhaust can be drawn into
a building through openings such
as windows and doors.
Loading
Adding accessories or cargo to your
motorcycle can adversely affect stability and handling if the weight distribution of the motorcycle is changed. To
avoid the possibility of an accident, use
extreme caution when adding cargo or
accessories to your motorcycle. Use
extra care when riding a motorcycle
that has added cargo or accessories.
Here, along with the information about
accessories below, are some general
guidelines to follow if loading cargo to
your motorcycle:
The total weight of the operator, passenger, accessories and cargo must
not exceed the maximum load limit.
Operation of an overloaded vehicle
could cause an accident.
Maximum load:
MT07 176 kg (388 lb)
MT07A 173 kg (381 lb)
1-3
When loading within this weight limit,
keep the following in mind:
 Cargo and accessory weight
should be kept as low and close to
the motorcycle as possible. Securely pack your heaviest items as
close to the center of the vehicle
as possible and make sure to distribute the weight as evenly as
possible on both sides of the motorcycle to minimize imbalance or
instability.
 Shifting weights can create a sudden imbalance. Make sure that
accessories and cargo are securely attached to the motorcycle
before riding. Check accessory
mounts and cargo restraints frequently.
• Properly adjust the suspension
for your load (suspension-adjustable models only), and
check the condition and pressure of your tires.
• Never attach any large or heavy
items to the handlebar, front
fork, or front fender. These
items, including such cargo as
sleeping bags, duffel bags, or
U1WSE0E0.book Page 4 Wednesday, November 13, 2013 10:28 AM
SAFETY INFORMATION
tents, can create unstable handling or a slow steering response.
 This vehicle is not designed to
pull a trailer or to be attached to
a sidecar.
Genuine Yamaha Accessories
Choosing accessories for your vehicle
is an important decision. Genuine
Yamaha accessories, which are available only from a Yamaha dealer, have
been designed, tested, and approved
by Yamaha for use on your vehicle.
Many companies with no connection
to Yamaha manufacture parts and accessories or offer other modifications
for Yamaha vehicles. Yamaha is not in
a position to test the products that
these aftermarket companies produce.
Therefore, Yamaha can neither endorse nor recommend the use of accessories not sold by Yamaha or
modifications not specifically recommended by Yamaha, even if sold and
installed by a Yamaha dealer.
Aftermarket Parts, Accessories, and
Modifications
While you may find aftermarket products similar in design and quality to
genuine Yamaha accessories, recognize that some aftermarket accessories or modifications are not suitable
because of potential safety hazards to
you or others. Installing aftermarket
products or having other modifications
performed to your vehicle that change
any of the vehicle’s design or operation
characteristics can put you and others
at greater risk of serious injury or
death. You are responsible for injuries
related to changes in the vehicle.
Keep the following guidelines in mind,
as well as those provided under “Loading” when mounting accessories.
 Never install accessories or carry
cargo that would impair the performance of your motorcycle.
Carefully inspect the accessory
before using it to make sure that it
does not in any way reduce
ground clearance or cornering
clearance, limit suspension travel,
1-4
steering travel or control operation, or obscure lights or reflectors.
• Accessories fitted to the handlebar or the front fork area can
create instability due to improper weight distribution or aerodynamic changes. If accessories
are added to the handlebar or
front fork area, they must be as
lightweight as possible and
should be kept to a minimum.
• Bulky or large accessories may
seriously affect the stability of
the motorcycle due to aerodynamic effects. Wind may attempt to lift the motorcycle, or
the motorcycle may become
unstable in cross winds. These
accessories may also cause instability when passing or being
passed by large vehicles.
• Certain accessories can displace the operator from his or
her normal riding position. This
improper position limits the
freedom of movement of the
1
U1WSE0E0.book Page 5 Wednesday, November 13, 2013 10:28 AM
SAFETY INFORMATION
1
operator and may limit control
ability, therefore, such accessories are not recommended.
 Use caution when adding electrical accessories. If electrical accessories exceed the capacity of
the motorcycle’s electrical system, an electric failure could result, which could cause a
dangerous loss of lights or engine
power.
Aftermarket Tires and Rims
The tires and rims that came with your
motorcycle were designed to match
the performance capabilities and to
provide the best combination of handling, braking, and comfort. Other
tires, rims, sizes, and combinations
may not be appropriate. Refer to page
6-15 for tire specifications and more information on replacing your tires.
Transporting the Motorcycle
Be sure to observe following instructions before transporting the motorcycle in another vehicle.
 Remove all loose items from the
motorcycle.
 Check that the fuel cock (if
equipped) is in the “OFF” position
and that there are no fuel leaks.
 Point the front wheel straight
ahead on the trailer or in the truck
bed, and choke it in a rail to prevent movement.
 Shift the transmission in gear (for
models with a manual transmission).
 Secure the motorcycle with tiedowns or suitable straps that are
attached to solid parts of the motorcycle, such as the frame or upper front fork triple clamp (and not,
for example, to rubber-mounted
handlebars or turn signals, or
parts that could break). Choose
the location for the straps carefully
so the straps will not rub against
painted surfaces during transport.
 The suspension should be compressed somewhat by the tiedowns, if possible, so that the motorcycle will not bounce excessively during transport.
1-5
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
DESCRIPTION
EAU10411
Left view
1
2
3,4
10 9 8 7 6 5
1.
2.
3.
4.
5.
6.
7.
8.
Auxiliary DC connector (page 3-27)
Seat lock (page 3-19)
Storage compartment (page 3-22)
Owner’s tool kit (page 6-2)
Shift pedal (page 3-14)
Engine oil filler cap (page 6-9)
Engine oil drain bolt (page 6-9)
Engine oil level check window (page 6-9)
9. Engine oil filter cartridge (page 6-9)
10.Coolant reservoir (page 6-11)
2-1
2
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
DESCRIPTION
EAU10421
Right view
1,2
2
10
1.
2.
3.
4.
5.
6.
7.
8.
3
9
4
5
8
6
7
Main fuse (page 6-31)
Fuse box (page 6-31)
Battery (page 6-29)
Shock absorber assembly spring preload adjusting ring (page 3-23)
Fuel tank cap (page 3-16)
Headlight (page 6-32)
Coolant drain bolt (page 6-12)
Brake pedal (page 3-15)
9. Rear brake light switch (page 6-19)
10.Rear brake fluid reservoir (page 6-21)
2-2
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
DESCRIPTION
EAU10431
Controls and instruments
1
1.
2.
3.
4.
5.
6.
7.
8.
2
3
4
Clutch lever (page 3-14)
Left handlebar switches (page 3-13)
Multi-function meter unit (page 3-6)
Main switch/steering lock (page 3-2)
Front brake fluid reservoir (page 6-21)
Right handlebar switches (page 3-13)
Throttle grip (page 6-15)
Brake lever (page 3-14)
2-3
5
6
7
8
2
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU10978
Immobilizer system
3
1. Code re-registering key (red bow)
2. Standard keys (black bow)
This vehicle is equipped with an immobilizer system to help prevent theft by
re-registering codes in the standard
keys. This system consists of the following:
 a code re-registering key (with a
red bow)
 two standard keys (with a black
bow) that can be re-registered
with new codes
 a transponder (which is installed in
the code re-registering key)
 an immobilizer unit
 an ECU
 an immobilizer system indicator
light (See page 3-5.)
The key with the red bow is used to
register codes in each standard key.
Since re-registering is a difficult process, take the vehicle along with all
three keys to a Yamaha dealer to have
them re-registered. Do not use the key
with the red bow for driving. It should
only be used for re-registering the
standard keys. Always use a standard
key for driving.




ECA11822
NOTICE
 DO NOT LOSE THE CODE REREGISTERING KEY! CONTACT
YOUR DEALER IMMEDIATELY
IF IT IS LOST! If the code re-registering key is lost, registering
new codes in the standard keys
is impossible. The standard
keys can still be used to start
the vehicle, however if code reregistering is required (i.e., if a
new standard key is made or all
keys are lost) the entire immobilizer system must be replaced.
Therefore, it is highly recom3-1





mended to use either standard
key and keep the code re-registering key in a safe place.
Do not submerse any key in water.
Do not expose any key to excessively high temperatures.
Do not place any key close to
magnets (this includes, but not
limited to, products such as
speakers, etc.).
Do not place items that transmit
electrical signals close to any
key.
Do not place heavy items on any
key.
Do not grind any key or alter its
shape.
Do not disassemble the plastic
part of any key.
Do not put two keys of any immobilizer system on the same
key ring.
Keep the standard keys as well
as keys of other immobilizer
systems away from this vehicle’s code re-registering key.
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
 Keep other immobilizer system
keys away from the main switch
as they may cause signal interference.
EAU10473
Main switch/steering lock
OFF
ON
LOCK
P
The main switch/steering lock controls
the ignition and lighting systems, and is
used to lock the steering. The various
positions are described below.
TIP
Be sure to use the standard key (black
bow) for regular use of the vehicle. To
minimize the risk of losing the code reregistering key (red bow), keep it in a
safe place and only use it for code reregistering.
3-2
EAU38531
ON
All electrical circuits are supplied with
power; the meter lighting, taillight, license plate light and auxiliary light
come on, and the engine can be started. The key cannot be removed.
TIP
The headlight comes on automatically
when the engine is started and stays
on until the key is turned to “OFF”,
even if the engine stalls.
EAU10662
OFF
All electrical systems are off. The key
can be removed.
EWA10062
WARNING
Never turn the key to “OFF” or
“LOCK” while the vehicle is moving.
Otherwise the electrical systems will
be switched off, which may result in
loss of control or an accident.
3
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU10685
LOCK
The steering is locked, and all electrical
systems are off. The key can be removed.
3
To unlock the steering
1
EAU49395
Indicator lights and warning
lights
2
To lock the steering
1
2
1. Push.
2. Turn.
12345
Push the key in, and then turn it to
“OFF” while still pushing it.
1. Push.
2. Turn.
1. Turn the handlebars all the way to
the left.
2. Push the key in from the “OFF”
position, and then turn it to
“LOCK” while still pushing it.
3. Remove the key.
EAU59680
(Parking)
The hazard lights and turn signal lights
can be turned on, but all other electrical systems are off. The key can be removed.
The steering must be locked before the
key can be turned to “ ”.
ECA20760
NOTICE
Using the hazard or turn signal lights
for an extended length of time may
cause the battery to discharge.
3-3
1.
2.
3.
4.
5.
6.
7.
8.
9.
6789
Left turn signal indicator light “ ”
Oil pressure warning light “
”
Coolant temperature warning light “ ”
Engine trouble warning light “
”
Anti-lock Brake System (ABS) warning
light “ ABS ” (for ABS models)
Immobilizer system indicator light “ ”
High beam indicator light “
”
Neutral indicator light “ ”
Right turn signal indicator light “ ”
EAU11031
Turn signal indicator lights “ ”
and “ ”
The corresponding indicator light
flashes when the turn signal switch is
pushed to the left or right.
U1WSE0E0.book Page 4 Friday, December 27, 2013 2:28 PM
INSTRUMENT AND CONTROL FUNCTIONS
EAU11061
Neutral indicator light “ ”
This indicator light comes on when the
transmission is in the neutral position.
EAU11081
High beam indicator light “ ”
This indicator light comes on when the
high beam of the headlight is switched
on.
EAU59962
Oil pressure warning light “
”
This warning light comes on if the engine oil pressure is low.
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on again after going off briefly,
and then remain on until the engine is
started.
If the warning light does not come on
initially when the key is turned to “ON”,
have a Yamaha dealer check the electrical circuit.
ECA21210
NOTICE
If the oil level is below the minimum
level, add sufficient oil of the recommended type to raise it up to the correct level. If the oil pressure warning
light remains on even if the oil level
is correct, immediately turn the engine off and have a Yamaha dealer
check the vehicle.
TIP
If the warning light does not go off after
starting the engine, check the engine
oil level and add oil if necessary. (See
page 6-9.)
If the warning light remains on after
adding engine oil, have a Yamaha
dealer check the vehicle.
EAU11447
Coolant temperature warning
light “ ”
This warning light comes on if the engine overheats. If this occurs, stop the
engine immediately and allow the engine to cool.
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
ECA10022
NOTICE
Do not continue to operate the engine if it is overheating.
TIP
 For radiator-fan-equipped vehicles, the radiator fan(s) automatically switch on or off according to
the coolant temperature in the radiator.
 If the engine overheats, see page
6-43 for further instructions.
EAU46443
Engine trouble warning light “ ”
This warning light comes on if a problem is detected in the electrical circuit
monitoring the engine. If this occurs,
If the warning light comes on when
the engine is running, stop the engine immediately and check oil level.
3-4
3
U1WSE0E0.book Page 5 Friday, December 27, 2013 2:28 PM
INSTRUMENT AND CONTROL FUNCTIONS
3
have a Yamaha dealer check the selfdiagnosis system. (See page 3-11 for
an explanation of the self-diagnosis
device.)
The electrical circuit of the warning
light can be checked by turning the key
to “ON”. The warning light should
come on for a few seconds, and then
go off.
If the warning light does not come on
initially when the key is turned to “ON”,
or if the warning light remains on, have
a Yamaha dealer check the electrical
circuit.
TIP
This warning light will come on when
the key is turned to “ON” and the start
switch is pushed, but this does not indicate a malfunction.
EAU58530
ABS warning light “ ” (for ABS
models)
In normal operation, the ABS warning
light comes on when the key is turned
to “ON”, and goes off after traveling at
a speed of 10 km/h (6 mi/h) or higher.
If the ABS warning light:
ABS
 does not come on when the key is
turned to “ON”
 comes on or flashes while riding
 does not go off after traveling at a
speed of 10 km/h (6 mi/h) or higher
The ABS may not work correctly. If any
of the above occurs, have a Yamaha
dealer check the system as soon as
possible. (See page 3-15 for an explanation of the ABS.)
EWA16041
WARNING
If the ABS warning light does not go
off after traveling at a speed of 10
km/h (6 mi/h) or higher, or if the
warning light comes on or flashes
while riding, the brake system reverts to conventional braking. If either of the above occurs, or if the
warning light does not come on at
all, use extra caution to avoid possible wheel lock during emergency
braking. Have a Yamaha dealer
check the brake system and electrical circuits as soon as possible.
3-5
EAU26878
Immobilizer system indicator
light “ ”
The electrical circuit of the indicator
light can be checked by turning the key
to “ON”. The indicator light should
come on for a few seconds, and then
go off.
If the indicator light does not come on
initially when the key is turned to “ON”,
or if the indicator light remains on, have
a Yamaha dealer check the electrical
circuit.
When the key is turned to “OFF” and
30 seconds have passed, the indicator
light will start flashing indicating the immobilizer system is enabled. After 24
hours have passed, the indicator light
will stop flashing, however the immobilizer system is still enabled.
The self-diagnosis device also detects
problems in the immobilizer system
circuits. (See page 3-11 for an explanation of the self-diagnosis device.)
U1WSE0E0.book Page 6 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS








EAU59973
Multi-function meter unit
1
2
7,8
1 2
1. Left set button
2. Right set button
1.
2.
3.
4.
5.
6.
7.
8.
3
4
5
6
Fuel meter
Clock
Transmission gear display
Eco indicator “ECO”
Speedometer
Tachometer
Multi-function display
Self-diagnosis device
EWA12423
WARNING
Be sure to stop the vehicle before
making any setting changes to the
multi-function meter unit. Changing
settings while riding can distract the
operator and increase the risk of an
accident.
The multi-function meter
equipped with the following:
 a speedometer
3-6
unit
is
a tachometer
a clock
a fuel meter
an eco indicator
a transmission gear display
a multi-function display
a self-diagnosis device
a brightness control mode
TIP
 Be sure to turn the key to “ON” before using the left and right set
buttons except for setting the
brightness control mode.
 For the U.K. only: To switch the
speedometer and multi-function
display between kilometers and
miles, set the multi-function display to the odometer mode or a
tripmeter mode, and then press
the left set button for at least three
seconds.
Speedometer
The speedometer shows the vehicle’s
traveling speed.
3
U1WSE0E0.book Page 7 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
Tachometer
Clock
1
5. Push the right set button to set the
minutes.
6. Push the left set button and then
release it to start the clock.
Fuel meter
3
1
1
2
2
1. Tachometer
2. Tachometer red zone
1. Clock
The tachometer allows the rider to
monitor the engine speed and keep it
within the ideal power range.
ECA10032
NOTICE
Do not operate the engine in the tachometer red zone.
Red zone: 10000 r/min and above
The clock displays when the key is
turned to “ON”. In addition, the clock
can be displayed for 10 seconds by
pushing the left set button when the
main switch is in the “OFF”, “LOCK”
or “ ” position.
To set the clock
1. Turn the key to “ON”.
2. Push the left set button and right
set button together for at least two
seconds.
3. When the hour digits start flashing, push the right set button to
set the hours.
4. Push the left set button, and the
minute digits will start flashing.
3-7
1. Fuel meter
2. Fuel level warning indicator “
”
The fuel meter indicates the amount of
fuel in the fuel tank. The display segments of the fuel meter disappear towards “E” (Empty) as the fuel level
decreases. When the last segment and
fuel level warning indicator “ ” start
flashing, refuel as soon as possible.
U1WSE0E0.book Page 8 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
TIP
This fuel meter is equipped with a selfdiagnosis system. If a problem is detected in the electrical circuit, the following cycle is repeated until the
malfunction is corrected: fuel level segments and fuel level warning
indicator “ ” flash eight times, then go
off for approximately 3 seconds. If this
occurs, have a Yamaha dealer check
the electrical circuit.
Eco indicator
1
This indicator comes on when the vehicle is being operated in an environmentally friendly, fuel-efficient manner.
The indicator goes off when the vehicle
is stopped.
This display shows the selected gear.
The neutral position is indicated by “–”
and by the neutral indicator light.
Multi-function display
TIP
Consider the following tips to reduce
fuel consumption:
 Avoid high engine speeds during
acceleration.
 Travel at a constant speed.
 Select the transmission gear that
is appropriate for the vehicle
speed.
1
1. Multi-function display
Transmission gear display
1
2
1. Eco indicator “ECO”
1. Transmission gear display
2. Neutral indicator light “ ”
3-8
The multi-function display is equipped
with the following:
 an odometer
 two tripmeters (which show the
distance traveled since they were
last set to zero)
 a fuel reserve tripmeter (which
shows the distance traveled since
the left segment of the fuel meter
started flashing)
 a coolant temperature display
 an ambient temperature display
3
U1WSE0E0.book Page 9 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
3
 an instantaneous fuel consumption display
 an average fuel consumption display
Push the left set button to switch the
display between the odometer mode
“ODO”, tripmeter modes “TRIP 1” and
“TRIP 2”, instantaneous fuel consumption mode “km/L” or “L/100 km”, average fuel consumption mode “AVE_ _._
km/L” or “AVE_ _._ L/100 km”, coolant
temperature mode “_ _ °C”, and ambient temperature mode “Air_ _ °C” in
the following order:
ODO → TRIP 1 → TRIP 2 →km/L or
L/100 km → AVE_ _._ km/L or AVE_ _._
L/100 km → _ _ °C → Air_ _ °C → ODO
For the UK only:
Push the left set button to switch the
display between the odometer mode
“ODO”, tripmeter modes “TRIP 1” and
“TRIP 2”, instantaneous fuel consumption mode “km/L”, “L/100 km” or
“MPG”, average fuel consumption
mode “AVE_ _._ km/L”, “AVE_ _._
L/100 km” or “AVE_ _._ MPG”, coolant
temperature mode “_ _ °C”, and ambient temperature mode “Air_ _ °C” in
the following order:
ODO → TRIP 1 → TRIP 2 → km/L,
L/100 km or MPG → AVE_ _._ km/L,
AVE_ _._ L/100 km or AVE_ _._ MPG →
_ _ °C → Air_ _ °C → ODO
TIP
Push the right set button to switch the
display in the reverse order.
If the fuel level warning indicator “ ”
and left segment of the fuel meter start
flashing, the display automatically
changes to the fuel reserve tripmeter
mode “TRIP F” and starts counting the
distance traveled from that point. In
that case, push the left set button to
switch the display between the various
tripmeter, odometer, instantaneous
fuel consumption and average fuel
consumption modes in the following
order:
3-9
TRIP F → km/L or L/100 km → AVE_
_._ km/L or AVE_ _._ L/100 km → _ _
°C → Air_ _ °C → ODO → TRIP 1 →
TRIP 2 → TRIP F
For the UK only:
TRIP F → km/L, L/100 km or MPG →
AVE_ _._ km/L, AVE_ _._ L/100 km or
AVE_ _._ MPG → _ _ °C → Air_ _ °C →
ODO → TRIP 1 → TRIP 2 → TRIP F
To reset a tripmeter, select it by pushing the left set button, and then push
the right set button for at least one second.
If you do not reset the fuel reserve tripmeter manually, it resets itself automatically and the display returns to the
prior mode after refueling and traveling
5 km (3 mi).
U1WSE0E0.book Page 10 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
Instantaneous
display
fuel
consumption
1
To switch between the instantaneous
fuel consumption displays, push the
left set button for one second when
one of the displays is shown.
TIP
If traveling at speeds under 20 km/h
(12 mi/h), “_ _._” is displayed.
Average fuel consumption mode
1
1. Instantaneous fuel consumption display
The instantaneous fuel consumption
display can be set to either “km/L”,
“L/100 km” or “MPG” (for the UK only).
 “km/L”: The distance that can be
traveled on 1.0 L of fuel under the
current riding conditions is shown.
 “L/100 km”: The amount of fuel
necessary to travel 100 km under
the current riding conditions is
shown.
 “MPG” (for the UK only): The distance that can be traveled on
1.0 Imp.gal of fuel under the current riding conditions is shown.
1. Average fuel consumption display
The average fuel consumption display
can be set to either “AVE_ _._ km/L”,
“AVE_ _._ L/100 km” or “AVE_ _._
MPG” (for the UK only).
This display shows the average fuel
consumption since it was last reset.
3-10
 “AVE_ _._ km/L”: The average distance that can be traveled on 1.0 L
of fuel is shown.
 “AVE_ _._ L/100 km”: The average
amount of fuel necessary to travel
100 km is shown.
 “AVE_ _._ MPG” (for the UK only):
The average distance that can be
traveled on 1.0 Imp.gal of fuel is
shown.
To switch between the average fuel
consumption displays, push the left set
button for one second when one of the
displays is shown.
To reset the average fuel consumption
display, select it by pushing the left set
button, and then push the right set button for at least one second.
TIP
After resetting an average fuel consumption display, “_ _._” is shown for
that display until the vehicle has traveled 1 km (0.6 mi).
3
U1WSE0E0.book Page 11 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
Coolant temperature display
Ambient temperature display
1
1
Self-diagnosis device
1
3
2
1. Coolant temperature display
1. Ambient temperature display
This display shows the coolant temperature from 40 °C to 116 °C in 1 °C
increments.
If the message “HI” flashes, stop the
vehicle, then stop the engine, and let
the engine cool. (See page 6-43.)
This display shows the ambient temperature from –9 °C to 99 °C in 1 °C increments. The temperature displayed
may vary from the ambient temperature.
TIP
 When the coolant temperature is
below 40 °C, “LO” will be displayed.
 The coolant temperature varies
with changes in the weather and
engine load.
TIP
 When the ambient temperature is
below –9 °C, “LO” will be displayed.
 The accuracy of the temperature
reading may be affected when riding slowly [approximately under
20 km/h (12.5 mi/h)] or when
stopped at traffic signals, railroad
crossings, etc.
3-11
3
1. Error code display
2. Engine trouble warning light “
”
3. Immobilizer system indicator light “
”
This model is equipped with a self-diagnosis device for various electrical
circuits.
If a problem is detected in any of those
circuits, the engine trouble warning
light will come on and the display will
indicate an error code.
If the display indicates any error codes,
note the code number, and then have
a Yamaha dealer check the vehicle.
The self-diagnosis device also detects
problems in the immobilizer system
circuits.
U1WSE0E0.book Page 12 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
If a problem is detected in the immobilizer system circuits, the immobilizer
system indicator light will flash and the
display will indicate an error code.
TIP
If the display indicates error code 52,
this could be caused by transponder
interference. If this error code appears,
try the following.
1. Use the code re-registering key to
start the engine.
TIP
Make sure there are no other immobilizer keys close to the main switch, and
do not keep more than one immobilizer
key on the same key ring! Immobilizer
system keys may cause signal interference, which may prevent the engine
from starting.
2. If the engine starts, turn it off and
try starting the engine with the
standard keys.
3. If one or both of the standard keys
do not start the engine, take the
vehicle, the code re-registering
key and both standard keys to a
Yamaha dealer and have the standard keys re-registered.
ECA11591
NOTICE
If the display indicates an error
code, the vehicle should be checked
as soon as possible in order to avoid
engine damage.
Brightness control mode
1
1. Brightness level display
This function allows you to adjust the
brightness of the multi-function meter
unit panel to suit the outside lighting
conditions.
To adjust the brightness
1. Turn the key to “OFF”.
3-12
2. Push and hold the left set button.
3. Turn the key to “ON” and continue
pushing the left set button until the
display switches to the brightness
control mode.
4. Push the right set button to set the
brightness level.
5. Push the left set button to confirm
the selected brightness level and
exit the brightness control mode.
3
U1WSE0E0.book Page 13 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU1234G
Handlebar switches
EAU12351
Pass switch “ ”
Press this switch to flash the headlight.
Left
EAU12401
Dimmer switch “ / ”
Set this switch to “ ” for the high
beam and to “ ” for the low beam.
1
3
2
EAU12461
Turn signal switch “ / ”
To signal a right-hand turn, push this
switch to “ ”. To signal a left-hand
turn, push this switch to “ ”. When
released, the switch returns to the center position. To cancel the turn signal
lights, push the switch in after it has returned to the center position.
3
4
1.
2.
3.
4.
Pass switch “
”
Dimmer switch “
/
”
Turn signal switch “ / ”
Horn switch “
”
Right
EAU12501
Horn switch “
”
Press this switch to sound the horn.
1
/
/
EAU41701
The engine trouble warning light will
come on when the key is turned to
“ON” and the start switch is pushed,
but this does not indicate a malfunction.
EAU12734
Hazard switch “ ”
With the key in the “ON” or “ ” position, use this switch to turn on the hazard lights (simultaneous flashing of all
turn signal lights).
The hazard lights are used in case of an
emergency or to warn other drivers
when your vehicle is stopped where it
might be a traffic hazard.
EAU54211
2
1. Start/Engine stop switch “
2. Hazard switch “ ”
Set this switch to “ ” to stop the engine in case of an emergency, such as
when the vehicle overturns or when the
throttle cable is stuck.
”
Start/Engine stop switch “ / / ”
To crank the engine with the starter,
set this switch to “ ”, and then push
the “ ” side of the switch. See page
5-1 for starting instructions prior to
starting the engine.
3-13
ECA10062
NOTICE
Do not use the hazard lights for an
extended length of time with the engine not running, otherwise the battery may discharge.
U1WSE0E0.book Page 14 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU12821
Clutch lever
EAU12872
Shift pedal
EAU26825
Brake lever
The brake lever is located on the right
side of the handlebar. To apply the
front brake, pull the lever toward the
throttle grip.
1
1
1
2
3
1. Clutch lever
1. Shift pedal
The clutch lever is located at the left
handlebar grip. To disengage the
clutch, pull the lever toward the handlebar grip. To engage the clutch, release the lever. The lever should be
pulled rapidly and released slowly for
smooth clutch operation.
The clutch lever is equipped with a
clutch switch, which is part of the ignition circuit cut-off system. (See page
3-25.)
The shift pedal is located on the left
side of the motorcycle and is used in
combination with the clutch lever when
shifting the gears of the 6-speed constant-mesh transmission equipped on
this motorcycle.
4
1
5
2
4
3
1. Brake lever
2. Distance between brake lever and throttle
grip
3. Brake lever position adjusting dial
4. “
” mark
The brake lever is equipped with a
brake lever position adjusting dial. To
adjust the distance between the brake
lever and the throttle grip, turn the adjusting dial while holding the lever
pushed away from the throttle grip.
Make sure that the appropriate setting
on the adjusting dial is aligned with
the “ ” mark on the brake lever.
3-14
3
U1WSE0E0.book Page 15 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU12942
Brake pedal
3
EAU60020
ABS (for ABS models)
1
1. Brake pedal
The brake pedal is on the right side of
the motorcycle. To apply the rear
brake, press down on the brake pedal.
The Yamaha ABS (Anti-lock Brake
System) features a dual electronic control system, which acts on the front and
rear brakes independently.
Operate the brakes with ABS as you
would conventional brakes. If the ABS
is activated, a pulsating sensation may
be felt at the brake lever or brake pedal. In this situation, continue to apply
the brakes and let the ABS work; do
not “pump” the brakes as this will reduce braking effectiveness.
EWA16051
WARNING
Always keep a sufficient distance
from the vehicle ahead to match the
riding speed even with ABS.
 The ABS performs best with
long braking distances.
 On certain surfaces, such as
rough or gravel roads, the braking distance may be longer with
the ABS than without.
The ABS is monitored by an ECU,
which will revert the system to conventional braking if a malfunction occurs.
3-15
TIP
 The ABS performs a self-diagnosis test each time the vehicle first
starts off after the key is turned to
“ON” and the vehicle has traveled
at a speed of 10 km/h (6 mi/h) or
higher. During this test, a “clicking” noise can be heard from the
hydraulic control unit, and if the
brake lever or brake pedal is even
slightly applied, a vibration can be
felt at the lever and pedal, but
these do not indicate a malfunction.
 This ABS has a test mode which
allows the owner to experience
the pulsation at the brake lever or
brake pedal when the ABS is operating. However, special tools are
required, so please consult your
Yamaha dealer when performing
this test.
U1WSE0E0.book Page 16 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
ECA20100
EAU13075
Fuel tank cap
NOTICE
Be careful not to damage the wheel
sensor or wheel sensor rotor; otherwise, improper performance of the
ABS will result.
1
1
3
2
2
1. Rear wheel sensor
2. Rear wheel sensor rotor
1. Unlock.
2. Fuel tank cap lock cover
1
2
To open the fuel tank cap
Open the fuel tank cap lock cover, insert the key into the lock, and then turn
it 1/4 turn clockwise. The lock will be
released and the fuel tank cap can be
opened.
1. Front wheel sensor
2. Front wheel sensor rotor
To close the fuel tank cap
1. Push the fuel tank cap into position with the key inserted in the
lock.
2. Turn the key counterclockwise to
the original position, remove it,
and then close the lock cover.
3-16
U1WSE0E0.book Page 17 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU13222
TIP
The fuel tank cap cannot be closed unless the key is in the lock. In addition,
the key cannot be removed if the cap is
not properly closed and locked.
3
EWA11092
WARNING
Make sure that the fuel tank cap is
properly closed after filling fuel.
Leaking fuel is a fire hazard.
Fuel
Make sure there is sufficient gasoline in
the tank.
1
2
EWA10882
WARNING
Gasoline and gasoline vapors are
extremely flammable. To avoid fires
and explosions and to reduce the
risk of injury when refueling, follow
these instructions.
1. Before refueling, turn off the engine and be sure that no one is sitting on the vehicle. Never refuel
while smoking, or while in the vicinity of sparks, open flames, or
other sources of ignition such as
the pilot lights of water heaters
and clothes dryers.
2. Do not overfill the fuel tank. When
refueling, be sure to insert the
pump nozzle into the fuel tank filler
hole. Stop filling when the fuel
reaches the bottom of the filler
tube. Because fuel expands when
it heats up, heat from the engine or
the sun can cause fuel to spill out
of the fuel tank.
3-17
1. Fuel tank filler tube
2. Maximum fuel level
3. Wipe up any spilled fuel immediately. NOTICE: Immediately
wipe off spilled fuel with a clean,
dry, soft cloth, since fuel may
deteriorate painted surfaces or
plastic parts. [ECA10072]
4. Be sure to securely close the fuel
tank cap.
EWA15152
WARNING
Gasoline is poisonous and can
cause injury or death. Handle gasoline with care. Never siphon gasoline
by mouth. If you should swallow
some gasoline or inhale a lot of gasoline vapor, or get some gasoline in
your eyes, see your doctor immedi-
U1WSE0E0.book Page 18 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
ately. If gasoline spills on your skin,
wash with soap and water. If gasoline spills on your clothing, change
your clothes.
EAU58110
Recommended fuel:
Premium unleaded gasoline (Gasohol (E10) acceptable)
Fuel tank capacity:
14 L (3.70 US gal, 3.08 Imp.gal)
Fuel reserve amount:
2.7 L (0.71 US gal, 0.59 Imp.gal)
brand. Use of unleaded fuel will extend
spark plug life and reduce maintenance costs.
Gasohol
There are two types of gasohol: gasohol containing ethanol and that containing methanol. Gasohol containing
ethanol can be used if the ethanol content does not exceed 10% (E10). Gasohol containing methanol is not
recommended by Yamaha because it
can cause damage to the fuel system
or vehicle performance problems.
ECA11401
NOTICE
Use only unleaded gasoline. The use
of leaded gasoline will cause severe
damage to internal engine parts,
such as the valves and piston rings,
as well as to the exhaust system.
EAU55512
Fuel tank breather hose and
overflow hose
3
2
1
4
1.
2.
3.
4.
3
Fuel tank overflow hose
Fuel tank breather hose
Clamp
Original position (paint mark)
Before operating the motorcycle:
 Check each hose connection.
 Check each hose for cracks or
damage, and replace if necessary.
 Make sure that the end of each
hose is not blocked, and clean if
necessary.
 Make sure that each hose is routed through the clamp.
 Make sure that the paint mark on
each hose is below the clamp.
Your Yamaha engine has been designed to use premium unleaded gasoline with a research octane number of
95 or higher. If knocking (or pinging)
occurs, use a gasoline of a different
3-18
U1WSE0E0.book Page 19 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU13434
NOTICE
This model is equipped with a catalytic
converter in the exhaust system.
Use only unleaded gasoline. The use
of leaded gasoline will cause unrepairable damage to the catalytic
converter.
EWA10863
WARNING
3
ECA10702
Catalytic converter
The exhaust system is hot after operation. To prevent a fire hazard or
burns:
 Do not park the vehicle near
possible fire hazards such as
grass or other materials that
easily burn.
 Park the vehicle in a place
where pedestrians or children
are not likely to touch the hot
exhaust system.
 Make sure that the exhaust system has cooled down before
doing any maintenance work.
 Do not allow the engine to idle
more than a few minutes. Long
idling can cause a build-up of
heat.
EAU59901
Seats
Passenger seat
To remove the passenger seat
1. Insert the key into the seat lock,
and then turn it counterclockwise.
2
1
1. Seat lock
2. Unlock.
2. While holding the key in that position, lift the rear of the passenger
seat and pull it backward.
3-19
U1WSE0E0.book Page 20 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
To install the passenger seat
1. Insert the projections on the front
of the passenger seat into the seat
holders as shown, and then push
the rear of the seat down to lock it
in place.
2
1
To install the rider seat
1. Fit the slot in the seat onto the projection on the frame cross member as shown, and then place the
seat in the original position.
3
1
2
1. Passenger seat
2. Hexagon wrench
2
1
1. Projection
2. Seat holder
2. Pull up the corners on the rear of
the rider seat as shown and remove the bolts with the hexagon
wrench.
1
2. Remove the key.
Rider seat
To remove the rider seat
1. Remove the passenger seat, and
then remove the hexagon wrench
located on the bottom of the seat.
1. Slot
2. Projection
2. Install the bolts with the hexagon
wrench.
3. Insert the hexagon wrench back
into its holder on the passenger
seat.
4. Install the passenger seat.
TIP
Make sure that the seats are properly
secured before riding.
1. Bolt
3. Lift the seat rearward and up to remove it.
3-20
U1WSE0E0.book Page 21 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU59981
Helmet holding cable
3
A helmet holding cable is located on
the bottom of the passenger seat. Use
this cable in conjunction with the
screwdriver to secure a helmet to the
vehicle.
1
2
TIP
When removing the screwdriver, slide
the screwdriver toward the “ ” mark
on the passenger seat.
1
2
TIP
Make sure that the screwdriver is securely positioned between its holders,
and then position the cable loops toward the middle of the screwdriver before installing the passenger seat.
3
1
2
4
3
1. Passenger seat
2. Helmet holding cable
3. Screwdriver
To secure a helmet with the helmet
holding cable
1. Remove the passenger seat. (See
page 3-19.)
2. Remove the screwdriver from its
holders on the passenger seat,
and then remove the helmet holding cable from the screwdriver.
1. Screwdriver
2. “ ” mark
3. “ ” mark
3
3. Pass the helmet holding cable
through the buckle on the helmet
strap.
4. Hook the cable loops over the
screwdriver, install the screwdriver by first inserting the screwdriver into the holder with the “ ”
mark, and then slide the screwdriver toward the holder with
the “ ” mark.
3-21
1.
2.
3.
4.
Helmet
Helmet holding cable
Screwdriver
Holder
5. Install the passenger seat.
WARNING! Never ride with a
helmet attached to the helmet
holder, since the helmet may hit
objects, causing loss of control
and possibly an accident. [EWA10162]
U1WSE0E0.book Page 22 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
To release a helmet from the helmet
holding cable
1. Remove the passenger seat.
2. Remove the screwdriver, then remove the helmet holding cable
from the helmet.
3. Store the cable under the seat by
hooking the cable loops over the
screwdriver, install the screwdriver in its original position, and
then hook the helmet holding cable over the hook on the bottom of
the passenger seat.
1
2
3
1. Screwdriver
2. Helmet holding cable
3. Hook
4. Install the passenger seat.
EAU14465
Storage compartment
1
 Do not exceed the maximum
load of MT07 176 kg (388 lb)
MT07A 173 kg (381 lb) for the vehicle.
3
1. Storage compartment
The storage compartment is located
under the passenger seat. (See page
3-19.)
When storing documents or other
items in the storage compartment, be
sure to wrap them in a plastic bag so
that they will not get wet. When washing the vehicle, be careful not to let any
water enter the storage compartment.
EWA10962
WARNING
 Do not exceed the load limit of
1.5 kg (3 lb) for the storage compartment.
3-22
U1WSE0E0.book Page 23 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU47001
Adjusting the shock absorber
assembly
3
543
9876
1
21
2
This shock absorber assembly is
equipped with a spring preload adjusting ring.
4
(a)
ECA10102
NOTICE
To avoid damaging the mechanism,
do not attempt to turn beyond the
maximum or minimum settings.
Adjust the spring preload as follows.
To increase the spring preload and
thereby harden the suspension, turn
the adjusting ring in direction (a). To
decrease the spring preload and thereby soften the suspension, turn the adjusting ring in direction (b).
 Align the appropriate notch in the
adjusting ring with the position indicator on the shock absorber.
 Use the special wrench and extension bar included in the owner’s tool kit to make the
adjustment.
(b)
3
1.
2.
3.
4.
Extension bar
Special wrench
Spring preload adjusting ring
Position indicator
Spring preload setting:
Minimum (soft):
1
Standard:
3
Maximum (hard):
9
EWA10222
WARNING
This shock absorber assembly contains highly pressurized nitrogen
gas. Read and understand the following information before handling
the shock absorber assembly.
3-23
 Do not tamper with or attempt
to open the cylinder assembly.
 Do not subject the shock absorber assembly to an open
flame or other high heat source.
This may cause the unit to explode due to excessive gas
pressure.
 Do not deform or damage the
cylinder in any way. Cylinder
damage will result in poor
damping performance.
 Do not dispose of a damaged or
worn-out shock absorber assembly yourself. Take the shock
absorber assembly to a Yamaha
dealer for any service.
U1WSE0E0.book Page 24 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU38963
Luggage strap holders
1
2
2
on the passenger seat, remove the
passenger seat. (See page 3-19.) Unhook the straps from the hooks, and
then install the seat with the straps
hanging out from under the passenger
seat.
EAU15306
Sidestand
The sidestand is located on the left
side of the frame. Raise the sidestand
or lower it with your foot while holding
the vehicle upright.
TIP
The built-in sidestand switch is part of
the ignition circuit cut-off system,
which cuts the ignition in certain situations. (See the following section for an
explanation of the ignition circuit cutoff system.)
1
1. Luggage strap holder
2. Hook
EWA10242
WARNING
The vehicle must not be ridden with
the sidestand down, or if the sidestand cannot be properly moved up
(or does not stay up), otherwise the
sidestand could contact the ground
and distract the operator, resulting
in a possible loss of control.
Yamaha’s ignition circuit cut-off
system has been designed to assist
the operator in fulfilling the responsibility of raising the sidestand before starting off. Therefore, check
1
1. Luggage strap holder
There are six luggage strap holders,
four on the bottom of the passenger
seat and one on each passenger footrest. To use the luggage strap holders
3-24
3
U1WSE0E0.book Page 25 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
this system regularly and have a
Yamaha dealer repair it if it does not
function properly.
3
EAU57950
Ignition circuit cut-off system
The ignition circuit cut-off system
(comprising the sidestand switch,
clutch switch and neutral switch) has
the following functions.
 It prevents starting when the
transmission is in gear and the
sidestand is up, but the clutch lever is not pulled.
 It prevents starting when the
transmission is in gear and the
clutch lever is pulled, but the sidestand is still down.
 It cuts the running engine when
the transmission is in gear and the
sidestand is moved down.
Periodically check the operation of the
ignition circuit cut-off system according to the following procedure.
3-25
U1WSE0E0.book Page 26 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
With the engine turned off:
1. Move the sidestand down.
2. Make sure that the start/engine stop switch is set to “
3. Turn the key on.
4. Shift the transmission into the neutral position.
5. Push the “ ” side of the start/engine stop switch.
Does the engine start?
YES
WARNING
If a malfunction is noted, have a Yamaha
dealer check the system before riding.
”.
3
NO
With the engine still running:
6. Move the sidestand up.
7. Keep the clutch lever pulled.
8. Shift the transmission into gear.
9. Move the sidestand down.
Does the engine stall?
YES
The neutral switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
NO
The sidestand switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
After the engine has stalled:
10. Move the sidestand up.
11. Keep the clutch lever pulled.
12. Push the “ ” side of the start/engine stop switch.
Does the engine start?
YES
The clutch switch may not be working correctly.
The motorcycle should not be ridden until
checked by a Yamaha dealer.
NO
The system is OK. The motorcycle can be ridden.
3-26
U1WSE0E0.book Page 27 Wednesday, November 13, 2013 10:28 AM
INSTRUMENT AND CONTROL FUNCTIONS
EAU59950
Auxiliary DC connector
EWA12532
WARNING
3
To prevent electrical shock or shortcircuiting, make sure that the cap is
installed when the auxiliary DC connector is not being used.
This vehicle is equipped with an auxiliary DC connector. A 12–V accessory
connected to the auxiliary DC connector can be used when the key is in the
“ON” position.
ECA20090
NOTICE
The accessory connected to the
auxiliary DC connector should not
be used with the engine turned off,
and the load must never exceed 24
W (2 A), otherwise the fuse may blow
or the battery may discharge.
2
1
1. Auxiliary DC connector
2. Auxiliary DC connector cap
3-27
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
FOR YOUR SAFETY – PRE-OPERATION CHECKS
EAU15598
Inspect your vehicle each time you use it to make sure the vehicle is in safe operating condition. Always follow the inspection
and maintenance procedures and schedules described in the Owner’s Manual.
EWA11152
WARNING
Failure to inspect or maintain the vehicle properly increases the possibility of an accident or equipment damage.
Do not operate the vehicle if you find any problem. If a problem cannot be corrected by the procedures provided in
this manual, have the vehicle inspected by a Yamaha dealer.
Before using this vehicle, check the following points:
ITEM
CHECKS
PAGE
Fuel
• Check fuel level in fuel tank.
• Refuel if necessary.
• Check fuel line for leakage.
• Check fuel tank breather hose and overflow hose for obstructions, cracks or
damage, and check hose connections.
Engine oil
• Check oil level in engine.
• If necessary, add recommended oil to specified level.
• Check vehicle for oil leakage.
6-9
Coolant
• Check coolant level in reservoir.
• If necessary, add recommended coolant to specified level.
• Check cooling system for leakage.
6-11
Front brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
4-1
3-17, 3-18
6-20, 6-21
4
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
FOR YOUR SAFETY – PRE-OPERATION CHECKS
ITEM
CHECKS
PAGE
Rear brake
• Check operation.
• If soft or spongy, have Yamaha dealer bleed hydraulic system.
• Check brake pads for wear.
• Replace if necessary.
• Check fluid level in reservoir.
• If necessary, add specified brake fluid to specified level.
• Check hydraulic system for leakage.
Clutch
• Check operation.
• Lubricate cable if necessary.
• Check lever free play.
• Adjust if necessary.
Throttle grip
• Make sure that operation is smooth.
• Check throttle grip free play.
• If necessary, have Yamaha dealer adjust throttle grip free play and lubricate cable and grip housing.
Control cables
• Make sure that operation is smooth.
• Lubricate if necessary.
Drive chain
• Check chain slack.
• Adjust if necessary.
• Check chain condition.
• Lubricate if necessary.
6-22, 6-24
Wheels and tires
• Check for damage.
• Check tire condition and tread depth.
• Check air pressure.
• Correct if necessary.
6-15, 6-18
Brake and shift pedals
• Make sure that operation is smooth.
• Lubricate pedal pivoting points if necessary.
6-25
Brake and clutch levers
• Make sure that operation is smooth.
• Lubricate lever pivoting points if necessary.
6-26
Sidestand
• Make sure that operation is smooth.
• Lubricate pivot if necessary.
6-27
4
6-20, 6-21
6-18
6-15, 6-25
6-25
4-2
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
FOR YOUR SAFETY – PRE-OPERATION CHECKS
ITEM
CHECKS
PAGE
Chassis fasteners
• Make sure that all nuts, bolts and screws are properly tightened.
• Tighten if necessary.
—
Instruments, lights, signals
and switches
• Check operation.
• Correct if necessary.
—
Sidestand switch
• Check operation of ignition circuit cut-off system.
• If system is not working correctly, have Yamaha dealer check vehicle.
3-24
4
4-3
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
OPERATION AND IMPORTANT RIDING POINTS
EAU15952
EAU48711
EAU59851
Starting the engine
Read the Owner’s Manual carefully to
become familiar with all controls. If
there is a control or function you do not
understand, ask your Yamaha dealer.
EWA10272
WARNING
5
Failure to familiarize yourself with
the controls can lead to loss of control, which could cause an accident
or injury.
TIP
This model is equipped with:
 a lean angle sensor to stop the engine in case of a turnover. In this
case, the multi-function display indicates error code 30, but this is
not a malfunction. Turn the key to
“OFF” and then to “ON” to clear
the error code. Failing to do so will
prevent the engine from starting
even though the engine will crank
when pushing the start switch.
 an engine auto-stop system. The
engine stops automatically if left
idling for 20 minutes. If the engine
stops, simply push the start
switch to restart the engine.
5-1
In order for the ignition circuit cut-off
system to enable starting, one of the
following conditions must be met:
 The transmission is in the neutral
position.
 The transmission is in gear with
the clutch lever pulled and the
sidestand up.
See page 3-25 for more information.
1. Turn the key to “ON” and make
sure that the start/engine stop
switch is set to “ ”.
The following warning lights and
indicator light should come on for
a few seconds, then go off.
 Coolant temperature warning
light
 Engine trouble warning light
 Immobilizer system indicator
light
 Oil pressure warning light
(This warning light comes on
again after going off briefly,
and then remains on until the
engine is started.)
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
OPERATION AND IMPORTANT RIDING POINTS
ECA20790
NOTICE
 If the above warning or indicator
lights do not come on initially
when the key is turned to “ON”,
or if a warning or indicator light
(except the oil pressure warning
light) remains on, see page 3-3
for the corresponding warning
and indicator light circuit check.
 After going off once, the oil
pressure warning light will
come back on until the engine is
started. If the warning light does
not come on, or if the warning
light does not go off after starting the engine, see page 3-3 for
the engine oil pressure warning
light circuit check.
For ABS models:
The ABS warning light should
come on when the key is turned to
“ON”, and then go off after traveling at a speed of 10 km/h (6 mi/h)
or higher.
ECA17682
EAU16672
Shifting
NOTICE
If the ABS warning light does not
come on and then go off as explained above, see page 3-3 for the
warning light circuit check.
2. Shift the transmission into the
neutral position. The neutral indicator light should come on. If not,
ask a Yamaha dealer to check the
electrical circuit.
3. Start the engine by pushing
the “ ” side of the start/engine
stop switch.
If the engine fails to start, release
the start/engine stop switch, wait
a few seconds, and then try again.
Each starting attempt should be
as short as possible to preserve
the battery. Do not crank the engine more than 10 seconds on any
one attempt.
ECA11043
NOTICE
For maximum engine life, never accelerate hard when the engine is
cold!
5-2
6
5
4
3
2
N
1
2 1
1. Shift pedal
2. Neutral position
Shifting gears lets you control the
amount of engine power available for
starting off, accelerating, climbing hills,
etc.
The gear positions are shown in the illustration.
TIP
To shift the transmission into the neutral position, press the shift pedal down
repeatedly until it reaches the end of its
travel, and then slightly raise it.
5
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
OPERATION AND IMPORTANT RIDING POINTS
ECA10261
NOTICE
5
 Even with the transmission in
the neutral position, do not
coast for long periods of time
with the engine off, and do not
tow the motorcycle for long distances. The transmission is
properly lubricated only when
the engine is running. Inadequate lubrication may damage
the transmission.
 Always use the clutch while
changing gears to avoid damaging the engine, transmission,
and drive train, which are not
designed to withstand the
shock of forced shifting.
EAU16811
Tips for reducing fuel consumption
Fuel consumption depends largely on
your riding style. Consider the following tips to reduce fuel consumption:
 Shift up swiftly, and avoid high engine speeds during acceleration.
 Do not rev the engine while shifting down, and avoid high engine
speeds with no load on the engine.
 Turn the engine off instead of letting it idle for an extended length
of time (e.g., in traffic jams, at traffic lights or at railroad crossings).
EAU16842
Engine break-in
There is never a more important period
in the life of your engine than the period
between 0 and 1600 km (1000 mi). For
this reason, you should read the following material carefully.
Since the engine is brand new, do not
put an excessive load on it for the first
1600 km (1000 mi). The various parts in
the engine wear and polish themselves
to the correct operating clearances.
During this period, prolonged full-throttle operation or any condition that
might result in engine overheating
must be avoided.
EAU17094
0–1000 km (0–600 mi)
Avoid prolonged operation above 5000
r/min. NOTICE: After 1000 km (600
mi) of operation, the engine oil must
be changed and the oil filter cartridge or element replaced. [ECA10303]
1000–1600 km (600–1000 mi)
Avoid prolonged operation above 6000
r/min.
5-3
U1WSE0E0.book Page 4 Wednesday, November 13, 2013 10:28 AM
OPERATION AND IMPORTANT RIDING POINTS
1600 km (1000 mi) and beyond
The vehicle can now be operated normally.
ECA10311
NOTICE
 Keep the engine speed out of
the tachometer red zone.
 If any engine trouble should occur during the engine break-in
period, immediately have a
Yamaha dealer check the vehicle.
EAU17214
Parking
When parking, stop the engine, and
then remove the key from the main
switch.
EWA10312
WARNING
 Since the engine and exhaust
system can become very hot,
park in a place where pedestrians or children are not likely to
touch them and be burned.
 Do not park on a slope or on soft
ground, otherwise the vehicle
may overturn, increasing the
risk of a fuel leak and fire.
 Do not park near grass or other
flammable materials which
might catch fire.
5-4
5
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU17245
EWA15123
EAU17303
Turn off the engine when performing
maintenance
unless
otherwise
specified.
 A running engine has moving
parts that can catch on body
parts or clothing and electrical
parts that can cause shocks or
fires.
 Running the engine while servicing can lead to eye injury,
burns, fire, or carbon monoxide
poisoning – possibly leading to
death. See page 1-3 for more information about carbon monoxide.
Emission controls not only function to
ensure cleaner air, but are also vital to
proper engine operation and maximum
performance. In the following periodic
maintenance charts, the services related to emissions control are grouped
separately. These services require
specialized data, knowledge, and
equipment. Maintenance, replacement, or repair of the emission control
devices and systems may be performed by any repair establishment or
individual that is certified (if applicable).
Yamaha dealers are trained and
equipped to perform these particular
services.
WARNING
6
Periodic inspection, adjustment, and
lubrication will keep your vehicle in the
safest and most efficient condition
possible. Safety is an obligation of the
vehicle owner/operator. The most important points of vehicle inspection,
adjustment, and lubrication are explained on the following pages.
The intervals given in the periodic
maintenance charts should be simply
considered as a general guide under
normal riding conditions. However, depending on the weather, terrain, geographical location, and individual use,
the maintenance intervals may need to
be shortened.
EWA15461
EWA10322
WARNING
Failure to properly maintain the vehicle or performing maintenance activities incorrectly may increase
your risk of injury or death during
service or while using the vehicle. If
you are not familiar with vehicle service, have a Yamaha dealer perform
service.
WARNING
Brake discs, calipers, drums, and
linings can become very hot during
use. To avoid possible burns, let
brake components cool before
touching them.
6-1
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU59910
Owner’s tool kit
1
TIP
If you do not have the tools or experience required for a particular job, have
a Yamaha dealer perform it for you.
1. Owner’s tool kit
6
The owner’s tool kit is located under
the passenger seat. Some tools are
also located on the bottom of the passenger seat. (See page 3-19.)
The service information included in this
manual and the tools provided in the
owner’s tool kit are intended to assist
you in the performance of preventive
maintenance and minor repairs. However, additional tools such as a torque
wrench may be necessary to perform
certain maintenance work correctly.
6-2
U1WSE0E0.book Page 3 Thursday, November 28, 2013 5:19 PM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU46862
TIP
 The annual checks must be performed every year, except if a kilometer-based maintenance, or for the UK, a
mileage-based maintenance, is performed instead.
 From 50000 km (30000 mi), repeat the maintenance intervals starting from 10000 km (6000 mi).
 Items marked with an asterisk should be performed by a Yamaha dealer as they require special tools, data and technical skills.
EAU46911
Periodic maintenance chart for the emission control system
ODOMETER READING
6
NO.
ITEM
1 * Fuel line
2 * Spark plugs
CHECK OR MAINTENANCE JOB
1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)
• Check fuel hoses for cracks or
damage.
√
√
√
√
• Check condition.
• Clean and regap.
√
3 * Valves
4 *
Fuel injection system
• Check valve clearance.
• Adjust.
• Adjust synchronization.
√
√
√
• Replace.
ANNUAL
CHECK
√
Every 40000 km (24000 mi)
√
6-3
√
√
√
√
√
U1WSE0E0.book Page 4 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU1770K
General maintenance and lubrication chart
ODOMETER READING
NO.
ITEM
CHECK OR MAINTENANCE JOB
1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)
ANNUAL
CHECK
√
1 * Air filter element
• Replace.
2
Air filter check hose
• Clean.
√
√
√
√
√
3
Clutch
• Check operation.
• Adjust.
√
√
√
√
√
• Check operation, fluid level and
vehicle for fluid leakage.
√
√
√
√
√
√
√
√
√
√
4 * Front brake
• Replace brake pads.
5 * Rear brake
• Check operation, fluid level and
vehicle for fluid leakage.
Whenever worn to the limit
√
√
• Replace brake pads.
6 * Brake hoses
√
√
Whenever worn to the limit
• Check for cracks or damage.
• Check for correct routing and
clamping.
√
• Replace.
√
√
Every 4 years
7 * Brake fluid
• Replace.
8 * Wheels
• Check runout and for damage.
√
√
Every 2 years
√
√
9 * Tires
• Check tread depth and for damage.
• Replace if necessary.
• Check air pressure.
• Correct if necessary.
√
√
√
√
10 * Wheel bearings
• Check bearings for looseness or
damage.
√
√
√
√
6-4
√
6
U1WSE0E0.book Page 5 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
ODOMETER READING
NO.
ITEM
11 * Swingarm
12
6
Drive chain
13 * Steering bearings
14 * Chassis fasteners
CHECK OR MAINTENANCE JOB
1000 km
(600 mi)
• Check operation and for excessive play.
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)
√
√
√
√
• Lubricate with lithium-soapbased grease.
• Check chain slack, alignment and
condition.
• Adjust and lubricate chain with a
special O-ring chain lubricant
thoroughly.
• Check bearing play and steering
for roughness.
ANNUAL
CHECK
Every 50000 km (30000 mi)
Every 800 km (500 mi) and after washing the motorcycle, riding in the rain or
riding in wet areas
√
√
• Lubricate with lithium-soapbased grease.
√
√
√
Every 20000 km (12000 mi)
• Make sure that all nuts, bolts and
screws are properly tightened.
√
√
√
√
√
15
Brake lever pivot
shaft
• Lubricate with silicone grease.
√
√
√
√
√
16
Brake pedal pivot
shaft
• Lubricate with lithium-soapbased grease.
√
√
√
√
√
17
Clutch lever pivot
shaft
• Lubricate with lithium-soapbased grease.
√
√
√
√
√
18
Shift pedal pivot
shaft
• Lubricate with lithium-soapbased grease.
√
√
√
√
√
19
Sidestand
• Check operation.
• Lubricate with lithium-soapbased grease.
√
√
√
√
√
√
√
√
√
√
20 * Sidestand switch
• Check operation.
√
6-5
U1WSE0E0.book Page 6 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
ODOMETER READING
NO.
ITEM
21 * Front fork
22 *
Shock absorber assembly
Rear suspension relay arm and con23 *
necting arm
pivoting points
24
25
Engine oil
Engine oil filter cartridge
26 * Cooling system
CHECK OR MAINTENANCE JOB
1000 km
(600 mi)
10000 km
(6000 mi)
20000 km
(12000 mi)
30000 km
(18000 mi)
40000 km
(24000 mi)
• Check operation and for oil leakage.
√
√
√
√
• Check operation and shock absorber for oil leakage.
√
√
√
√
• Check operation.
√
√
√
√
• Lubricate with lithium-soapbased grease.
√
• Change.
• Check oil level and vehicle for oil
leakage.
√
• Replace.
√
√
• Check operation.
28
Moving parts and
cables
29 * Throttle grip
30 *
Lights, signals and
switches
√
√
√
• Change coolant.
Front and rear
brake switches
√
√
√
6
• Check coolant level and vehicle
for coolant leakage.
27 *
√
ANNUAL
CHECK
√
√
√
√
√
Every 3 years
√
√
√
√
√
• Lubricate.
√
√
√
√
√
• Check operation.
• Check throttle grip free play, and
adjust if necessary.
• Lubricate cable and grip housing.
√
√
√
√
√
√
√
√
√
√
• Check operation.
• Adjust headlight beam.
√
√
6-6
U1WSE0E0.book Page 7 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU18681
TIP
 Air filter
• This model’s air filter is equipped with a disposable oil-coated paper element, which must not be cleaned with compressed air to avoid damaging it.
• The air filter element needs to be replaced more frequently when riding in unusually wet or dusty areas.
 Hydraulic brake service
• Regularly check and, if necessary, correct the brake fluid level.
• Every two years replace the internal components of the brake master cylinders and calipers, and change the brake
fluid.
• Replace the brake hoses every four years and if cracked or damaged.
6
6-7
U1WSE0E0.book Page 8 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU19653
Checking the spark plugs
The spark plugs are important engine
components, which should be
checked periodically, preferably by a
Yamaha dealer. Since heat and deposits will cause any spark plug to slowly
erode, they should be removed and
checked in accordance with the periodic maintenance and lubrication
chart. In addition, the condition of the
spark plugs can reveal the condition of
the engine.
The porcelain insulator around the
center electrode of each spark plug
should be a medium-to-light tan (the
ideal color when the vehicle is ridden
normally), and all spark plugs installed
in the engine should have the same
color. If any spark plug shows a distinctly different color, the engine could
be operating improperly. Do not attempt to diagnose such problems
yourself. Instead, have a Yamaha dealer check the vehicle.
If a spark plug shows signs of electrode erosion and excessive carbon or
other deposits, it should be replaced.
Specified spark plug:
NGK/LMAR8A-9
Before installing a spark plug, the
spark plug gap should be measured
with a wire thickness gauge and, if
necessary, adjusted to specification.
TIP
If a torque wrench is not available
when installing a spark plug, a good
estimate of the correct torque is 1/4–
1/2 turn past finger tight. However, the
spark plug should be tightened to the
specified torque as soon as possible.
ECA10841
NOTICE
1. Spark plug gap
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Clean the surface of the spark plug
gasket and its mating surface, and
then wipe off any grime from the spark
plug threads.
Tightening torque:
Spark plug:
13 Nm (1.3 m·kgf, 9.4 ft·lbf)
6-8
Do not use any tools to remove or install the spark plug cap, otherwise
the ignition coil coupler may get
damaged. The spark plug cap may
be difficult to remove because the
rubber seal on the end of the cap fits
tightly. To remove the spark plug
cap, simply twist it back and forth
while pulling it out; to install it, twist
it back and forth while pushing it in.
6
U1WSE0E0.book Page 9 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU60470
Engine oil and oil filter cartridge
The engine oil level should be checked
before each ride. In addition, the oil
must be changed and the oil filter cartridge replaced at the intervals specified in the periodic maintenance and
lubrication chart.
6
To check the engine oil level
1. Place the vehicle on a level surface and hold it in an upright position. A slight tilt to the side can
result in a false reading.
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Wait a few minutes until the oil settles, and then check the oil level
through the engine oil level check
window located at the bottom-left
side of the crankcase.
TIP
The engine oil should be between the
minimum and maximum level marks.
1
3
4
4. Remove the engine oil filler cap,
the engine oil drain bolt and its
gasket to drain the oil from the
crankcase.
2
1
1.
2.
3.
4.
2
Engine oil filler cap
Engine oil level check window
Maximum level mark
Minimum level mark
4. If the engine oil is below the minimum level mark, add sufficient oil
of the recommended type to raise
it to the correct level.
To change the engine oil (with or
without oil filter cartridge replacement)
1. Place the vehicle on a level surface.
2. Start the engine, warm it up for
several minutes, and then turn it
off.
3. Place an oil pan under the engine
to collect the used oil.
6-9
1. Engine oil drain bolt
2. Gasket
TIP
Skip steps 5–7 if the oil filter cartridge
is not being replaced.
5. Remove the oil filter cartridge with
an oil filter wrench.
U1WSE0E0.book Page 10 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
1 2
1. Oil filter wrench
2. Oil filter cartridge
TIP
An oil filter wrench is available at a
Yamaha dealer.
6. Apply a thin coat of clean engine
oil to the O-ring of the new oil filter
cartridge.
1. O-ring
1. Torque wrench
TIP
Make sure that the O-ring is properly
seated.
7. Install the new oil filter cartridge
with an oil filter wrench, and then
tighten it to the specified torque
with a torque wrench.
Tightening torque:
Oil filter cartridge:
17 Nm (1.7 m·kgf, 12 ft·lbf)
8. Install the engine oil drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
Tightening torque:
Engine oil drain bolt:
43 Nm (4.3 m·kgf, 31 ft·lbf)
9. Refill with the specified amount of
the recommended engine oil, and
then install and tighten the oil filler
cap.
6-10
6
U1WSE0E0.book Page 11 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
Recommended engine oil:
See page 8-1.
Oil quantity:
Without oil filter cartridge replacement:
2.30 L (2.43 US qt, 2.02 Imp.qt)
With oil filter cartridge replacement:
2.60 L (2.75 US qt, 2.29 Imp.qt)
TIP
Be sure to wipe off spilled oil on any
parts after the engine and exhaust system have cooled down.
6
ECA11621
NOTICE
 In order to prevent clutch slippage (since the engine oil also
lubricates the clutch), do not
mix any chemical additives. Do
not use oils with a diesel specification of “CD” or oils of a higher quality than specified. In
addition, do not use oils labeled
“ENERGY CONSERVING II” or
higher.
 Make sure that no foreign material enters the crankcase.
10. Start the engine, and then let it idle
for several minutes while checking
it for oil leakage. If oil is leaking,
immediately turn the engine off
and check for the cause.
TIP
After the engine is started, the engine
oil pressure warning light should go off.
ECA20860
NOTICE
If the oil pressure warning light flickers or remains on even if the oil level
is correct, immediately turn the engine off and have a Yamaha dealer
check the vehicle.
11. Turn the engine off, wait a few
minutes until the oil settles, and
then check the oil level and correct it if necessary.
EAU20071
Coolant
The coolant level should be checked
before each ride. In addition, the coolant must be changed at the intervals
specified in the periodic maintenance
and lubrication chart.
EAU20093
To check the coolant level
1. Place the vehicle on a level surface and hold it in an upright position.
TIP
 The coolant level must be
checked on a cold engine since
the level varies with engine temperature.
 Make sure that the vehicle is positioned straight up when checking
the coolant level. A slight tilt to the
side can result in a false reading.
2. Check the coolant level in the
coolant reservoir.
TIP
The coolant should be between the
minimum and maximum level marks.
6-11
U1WSE0E0.book Page 12 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
3
1. Coolant reservoir
2. Maximum level mark
3. Minimum level mark
3. If the coolant is at or below the
minimum level mark, remove the
reservoir cap.
1
1. Coolant reservoir cap
4. Add coolant to the maximum level
mark, and then install the reservoir
cap. WARNING! Remove only
the coolant reservoir cap. Never
attempt to remove the radiator
cap when the engine is hot.
[EWA15162] NOTICE: If coolant is not
available, use distilled water or
soft tap water instead. Do not
use hard water or salt water
since it is harmful to the engine.
If water has been used instead
of coolant, replace it with coolant as soon as possible, otherwise the cooling system will not
be protected against frost and
corrosion. If water has been
added to the coolant, have a
Yamaha dealer check the antifreeze content of the coolant as
soon as possible, otherwise the
effectiveness of the coolant will
be reduced. [ECA10473]
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
6-12
EAU59861
To change the coolant
1. Place the vehicle on a level surface and let the engine cool if necessary.
2. Place a container under the engine to collect the used coolant.
3. Remove the radiator cap retaining
bolt and radiator cap. WARNING!
Never attempt to remove the radiator cap when the engine is
hot. [EWA10382]
6
2
1
1. Radiator cap
2. Radiator cap retaining bolt
4. Remove the coolant reservoir cover by removing the bolt and quick
fastener, and then remove the
coolant reservoir.
U1WSE0E0.book Page 13 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
2
1
7. Install the coolant reservoir and its
cover by placing them in the original position, and then installing the
bolt and quick fastener.
Tightening torque:
Coolant drain bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
3
1. Coolant reservoir cover
2. Bolt
3. Quick fastener
6
11. Pour the specified amount of the
recommended coolant into the radiator and reservoir.
5. Remove the coolant reservoir cap.
1
8. Remove the coolant drain bolt and
its gasket to drain the cooling system.
2
2
1. Coolant reservoir cap
2. Coolant reservoir
6. Drain the coolant from the coolant
reservoir by turning it upside
down.
9. After the coolant is completely
drained, thoroughly flush the cooling system with clean tap water.
10. Install the coolant drain bolt and
its new gasket, and then tighten
the bolt to the specified torque.
1
Antifreeze/water mixture ratio:
1:1
Recommended antifreeze:
High-quality ethylene glycol antifreeze containing corrosion inhibitors for aluminum engines
Coolant quantity:
Radiator capacity (including all
routes):
1.60 L (1.69 US qt, 1.41 Imp.qt)
Coolant reservoir capacity (up to
the maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
12. Install the coolant reservoir cap.
13. Install the radiator cap.
1. Coolant drain bolt
2. Gasket
6-13
U1WSE0E0.book Page 14 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
14. Start the engine, let it idle for several minutes, and then turn it off.
15. Remove the radiator cap to check
the coolant level in the radiator. If
necessary, add sufficient coolant
until it reaches the top of the radiator, and then install the radiator
cap and radiator cap retaining
bolt.
16. Check the coolant level in the reservoir. If necessary, remove the
coolant reservoir cap, add coolant
to the maximum level mark, and
then install the cap.
17. Start the engine, and then check
the vehicle for coolant leakage. If
coolant is leaking, have a Yamaha
dealer check the cooling system.
EAU60450
Replacing the air filter element and cleaning the check
hose
The air filter element should be replaced at the intervals specified in the
periodic maintenance and lubrication
chart. Have a Yamaha dealer replace
the air filter element more frequently if
you are riding in unusually wet or dusty
areas. However, the air filter check
hose can be easily reached and should
be frequently checked and cleaned if
necessary.
To clean the air filter check hose
1. Check the hose under the air filter
case for accumulated dirt or water.
6-14
1
1. Air filter check hose
2. If dirt or water is visible, remove
the hose, clean it, and then install
it.
6
U1WSE0E0.book Page 15 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU21385
Checking the throttle grip free
play
1
6
EAU21402
EAU60460
Valve clearance
Tires
The valve clearance changes with use,
resulting in improper air-fuel mixture
and/or engine noise. To prevent this
from occurring, the valve clearance
must be adjusted by a Yamaha dealer
at the intervals specified in the periodic
maintenance and lubrication chart.
Tires are the only contact between the
vehicle and the road. Safety in all conditions of riding depends on a relatively
small area of road contact. Therefore, it
is essential to maintain the tires in good
condition at all times and replace them
at the appropriate time with the specified tires.
Tire air pressure
The tire air pressure should be
checked and, if necessary, adjusted
before each ride.
1. Throttle grip free play
The throttle grip free play should measure 3.0–5.0 mm (0.12–0.20 in) at the
inner edge of the throttle grip. Periodically check the throttle grip free play
and, if necessary, have a Yamaha dealer adjust it.
EWA10504
WARNING
Operation of this vehicle with improper tire pressure may cause severe injury or death from loss of
control.
 The tire air pressure must be
checked and adjusted on cold
tires (i.e., when the temperature
of the tires equals the ambient
temperature).
 The tire air pressure must be
adjusted in accordance with the
riding speed and with the total
6-15
U1WSE0E0.book Page 16 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
weight of rider, passenger, cargo, and accessories approved
for this model.
Tire air pressure (measured on cold
tires):
Front:
225 kPa (2.25 kgf/cm², 33 psi)
Rear:
250 kPa (2.50 kgf/cm², 36 psi)
High-speed riding:
Front:
225 kPa (2.25 kgf/cm², 33 psi)
Rear:
250 kPa (2.50 kgf/cm², 36 psi)
Maximum load*:
MT07 176 kg (388 lb)
MT07A 173 kg (381 lb)
* Total weight of rider, passenger, cargo and accessories
EWA10512
WARNING
Never overload your vehicle. Operation of an overloaded vehicle could
cause an accident.
Tire inspection
EWA10472
WARNING
1. Tire sidewall
2. Tire tread depth
The tires must be checked before each
ride. If the center tread depth reaches
the specified limit, if the tire has a nail
or glass fragments in it, or if the sidewall is cracked, have a Yamaha dealer
replace the tire immediately.
Minimum tire tread depth (front and
rear):
1.6 mm (0.06 in)
TIP
The tire tread depth limits may differ
from country to country. Always comply with the local regulations.
6-16
 Have a Yamaha dealer replace
excessively worn tires. Besides
being illegal, operating the vehicle with excessively worn tires
decreases riding stability and
can lead to loss of control.
 The replacement of all wheel
and brake-related parts, including the tires, should be left to a
Yamaha dealer, who has the
necessary professional knowledge and experience to do so.
 Ride at moderate speeds after
changing a tire since the tire
surface must first be “broken
in” for it to develop its optimal
characteristics.
6
U1WSE0E0.book Page 17 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
Tire information
6
characteristics of the motorcycle may be different, which
could lead to an accident.
 Always make sure that the valve
caps are securely installed to
prevent air pressure leakage.
 Use only the tire valves and
valve cores listed below to
avoid tire deflation during a
high-speed ride.
1. Tire air valve
2. Tire air valve core
3. Tire air valve cap with seal
After extensive tests, only the tires listed below have been approved for this
model by Yamaha Motor Co., Ltd.
This motorcycle is equipped with tubeless tires and rubber tire air valves.
Tires age, even if they have not been
used or have only been used occasionally. Cracking of the tread and sidewall
rubber, sometimes accompanied by
carcass deformation, is an evidence of
ageing. Old and aged tires shall be
checked by tire specialists to ascertain
their suitability for further use.
EWA10482
WARNING
 The front and rear tires should
be of the same make and design, otherwise the handling
Front tire:
Size:
120/70 ZR17M/C (58W)
Manufacturer/model:
MICHELIN/PILOT ROAD 3
BRIDGESTONE/BT023F F
Rear tire:
Size:
180/55 ZR17M/C (73W)
Manufacturer/model:
MICHELIN/PILOT ROAD 3A
BRIDGESTONE/BT023R M
FRONT and REAR:
Tire air valve:
TR412
Valve core:
#9100 (original)
6-17
EWA10601
WARNING
This motorcycle is fitted with superhigh-speed tires. Note the following
points in order to make the most efficient use of these tires.
 Use only the specified replacement tires. Other tires may run
the danger of bursting at super
high speeds.
 Brand-new tires can have a relatively poor grip on certain road
surfaces until they have been
“broken in”. Therefore, it is advisable before doing any highspeed riding to ride conservatively for approximately 100 km
(60 mi) after installing a new tire.
 The tires must be warmed up
before a high-speed run.
 Always adjust the tire air pressure according to the operating
conditions.
U1WSE0E0.book Page 18 Friday, November 22, 2013 8:56 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU21963
Cast wheels
To maximize the performance, durability, and safe operation of your vehicle,
note the following points regarding the
specified wheels.
 The wheel rims should be
checked for cracks, bends, warpage or other damage before each
ride. If any damage is found, have
a Yamaha dealer replace the
wheel. Do not attempt even the
smallest repair to the wheel. A deformed or cracked wheel must be
replaced.
 The wheel should be balanced
whenever either the tire or wheel
has been changed or replaced. An
unbalanced wheel can result in
poor performance, adverse handling characteristics, and a shortened tire life.
EAU33892
Adjusting the clutch lever free
play
2
1
(a)
(b)
1. Clutch lever free play adjusting bolt
2. Clutch lever free play
The clutch lever free play should measure 5.0–10.0 mm (0.20–0.39 in) as
shown. Periodically check the clutch
lever free play and, if necessary, adjust
it as follows.
To increase the clutch lever free play,
turn the clutch lever free play adjusting
bolt at the clutch lever in direction (a).
To decrease the clutch lever free play,
turn the adjusting bolt in direction (b).
TIP
If the specified clutch lever free play
cannot be obtained as described
above, proceed as follows.
1. Fully turn the adjusting bolt at the
clutch lever in direction (a) to loosen the clutch cable.
2. Loosen the locknut at the crankcase.
3. To increase the clutch lever free
play, turn the clutch lever free play
adjusting nut in direction (a). To
decrease the clutch lever free
play, turn the adjusting nut in direction (b).
1
2
(b)
(a)
1. Locknut
2. Clutch lever free play adjusting nut
4. Tighten the locknut.
6-18
6
U1WSE0E0.book Page 19 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU37914
Checking the brake lever free
play
braking performance, which may result in loss of control and an accident.
EAU57070
Brake light switches
For non-ABS models
1
1
(a)
6
2
(b)
1. No brake lever free play
1. Rear brake light switch
2. Rear brake light switch adjusting nut
There should be no free play at the
brake lever end. If there is free play,
have a Yamaha dealer inspect the
brake system.
The brake light, which is activated by
the brake pedal and brake lever,
should come on just before braking
takes effect. If necessary, adjust the
rear brake light switch as follows, but
the front brake light switch should be
adjusted by a Yamaha dealer.
Turn the rear brake light switch adjusting nut while holding the rear brake
light switch in place. To make the
brake light come on earlier, turn the ad-
EWA14212
WARNING
A soft or spongy feeling in the brake
lever can indicate the presence of
air in the hydraulic system. If there is
air in the hydraulic system, have a
Yamaha dealer bleed the system before operating the vehicle. Air in the
hydraulic system will diminish the
6-19
U1WSE0E0.book Page 20 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
justing nut in direction (a). To make the
brake light come on later, turn the adjusting nut in direction (b).
For ABS models
The brake light, which is activated by
the brake pedal and brake lever,
should come on just before braking
takes effect. If necessary, have a
Yamaha dealer adjust the brake light
switches.
Checking the front and rear
brake pads
touches the brake disc, have a
Yamaha dealer replace the brake pads
as a set.
The front and rear brake pads must be
checked for wear at the intervals specified in the periodic maintenance and
lubrication chart.
Rear brake pads
EAU22393
EAU46292
EAU36891
Front brake pads
1
1
6
1
1
1. Brake pad wear indicator groove
1. Brake pad wear indicator
Each front brake pad is provided with
wear indicators, which allows you to
check the brake pad wear without having to disassemble the brake. To check
the brake pad wear, check the position
of the wear indicators while applying
the brake. If a brake pad has worn to
the point that a wear indicator almost
6-20
Each rear brake pad is provided with
wear indicator grooves, which allow
you to check the brake pad wear without having to disassemble the brake.
To check the brake pad wear, check
the wear indicator grooves. If a brake
pad has worn to the point that a wear
indicator groove almost appears, have
a Yamaha dealer replace the brake
pads as a set.
U1WSE0E0.book Page 21 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU40262
Checking the brake fluid level
Before riding, check that the brake fluid
is above the minimum level mark.
Check the brake fluid level with the top
of the reservoir level. Replenish the
brake fluid if necessary.
Rear brake
1
Front brake
1
1. Minimum level mark
Specified brake fluid:
DOT 4
6
EWA16011
WARNING
1. Minimum level mark
Improper maintenance can result in
loss of braking ability. Observe
these precautions:
 Insufficient brake fluid may allow air to enter the brake system,
reducing
braking
performance.
 Clean the filler cap before removing. Use only DOT 4 brake
fluid from a sealed container.
6-21
 Use only the specified brake fluid; otherwise, the rubber seals
may deteriorate, causing leakage.
 Refill with the same type of
brake fluid. Adding a brake fluid
other than DOT 4 may result in a
harmful chemical reaction.
 Be careful that water or dust
does not enter the brake fluid
reservoir when refilling. Water
will significantly lower the boiling point of the fluid and may result in vapor lock, and dirt may
clog the ABS hydraulic unit
valves.
ECA17641
NOTICE
Brake fluid may damage painted
surfaces or plastic parts. Always
clean up spilled fluid immediately.
As the brake pads wear, it is normal for
the brake fluid level to gradually go
down. A low brake fluid level may indicate worn brake pads and/or brake
system leakage; therefore, be sure to
check the brake pads for wear and the
brake system for leakage. If the brake
U1WSE0E0.book Page 22 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
fluid level goes down suddenly, have a
Yamaha dealer check the cause before
further riding.
EAU22733
EAU22762
Changing the brake fluid
Drive chain slack
Have a Yamaha dealer change the
brake fluid at the intervals specified in
the periodic maintenance and lubrication chart. In addition, have the oil seals
of the master cylinders and calipers as
well as the brake hoses replaced at the
intervals listed below or whenever they
are damaged or leaking.
 Oil seals: Replace every two
years.
 Brake hoses: Replace every four
years.
The drive chain slack should be
checked before each ride and adjusted
if necessary.
EAU60040
To check the drive chain slack
1. Place the motorcycle on the sidestand.
TIP
When checking and adjusting the drive
chain slack, there should be no weight
on the motorcycle.
2. Shift the transmission into the
neutral position.
3. Push down on the drive chain under the end of the drive chain
guide with a force of 15 N (1.5 kgf,
3.0 lbf).
4. Measure the drive chain slack between the drive chain guide and
the center of the chain as shown.
Drive chain slack:
51.0–56.0 mm (2.01–2.20 in)
6-22
6
U1WSE0E0.book Page 23 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
1
this from occurring, keep the
drive chain slack within the
specified limits. [ECA17791]
1
(a)
2
1. Drive chain guide
2. Drive chain slack
6
1. Axle nut
2. Locknut
5. If the drive chain slack is incorrect,
adjust it as follows.
EAU59920
To adjust the drive chain slack
Consult a Yamaha dealer before adjusting the drive chain slack.
1. Loosen the locknut at each end of
the swingarm, and then loosen the
axle nut.
(b)
2. To tighten the drive chain, turn the
drive chain slack adjusting nut at
each end of the swingarm in direction (a). To loosen the drive chain,
turn the adjusting nut at each end
of the swingarm in direction (b),
and then push the rear wheel forward. NOTICE: Improper drive
chain slack will overload the engine as well as other vital parts
of the motorcycle and can lead
to chain slippage or breakage. If
the drive chain slack is more
than 58.0 mm (2.28 in), the chain
can damage the frame, swingarm, and other parts. To prevent
6-23
1. Drive chain slack adjusting nut
TIP
Using the alignment marks on each
side of the swingarm, make sure that
both drive chain slack adjusting plates
are in the same position for proper
wheel alignment.
U1WSE0E0.book Page 24 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23026
2
1
1. Alignment marks
2. Drive chain slack adjusting plate
3. Tighten the axle nut, and then
tighten the locknuts to the specified torques.
Tightening torques:
Axle nut:
105 Nm (10.5 m·kgf, 76 ft·lbf)
Locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
4. Make sure that the drive chain
slack adjusting plates are in the
same position, the drive chain
slack is correct, and the drive
chain moves smoothly.
Cleaning and lubricating the
drive chain
may contain substances that
could damage the O-rings.
[ECA11112]
The drive chain must be cleaned and
lubricated at the intervals specified in
the periodic maintenance and lubrication chart, otherwise it will quickly wear
out, especially when riding in dusty or
wet areas. Service the drive chain as
follows.
ECA10584
NOTICE
The drive chain must be lubricated
after washing the motorcycle, riding
in the rain or riding in wet areas.
1. Clean the drive chain with kerosene and a small soft brush.
NOTICE: To prevent damaging
the O-rings, do not clean the
drive chain with steam cleaners,
high-pressure washers or inappropriate solvents. [ECA11122]
2. Wipe the drive chain dry.
3. Thoroughly lubricate the drive
chain with a special O-ring chain
lubricant. NOTICE: Do not use
engine oil or any other lubricants for the drive chain, as they
6-24
6
U1WSE0E0.book Page 25 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23115
EAU23098
6
EAU44275
Checking and lubricating the
cables
Checking and lubricating the
throttle grip and cable
Checking and lubricating the
brake and shift pedals
The operation of all control cables and
the condition of the cables should be
checked before each ride, and the cables and cable ends should be lubricated if necessary. If a cable is
damaged or does not move smoothly,
have a Yamaha dealer check or replace it. WARNING! Damage to the
outer housing of cables may result
in internal rusting and cause interference with cable movement. Replace damaged cables as soon as
possible to prevent unsafe conditions. [EWA10712]
The operation of the throttle grip
should be checked before each ride. In
addition, the cable should be lubricated by a Yamaha dealer at the intervals
specified in the periodic maintenance
chart.
The throttle cable is equipped with a
rubber cover. Make sure that the cover
is securely installed. Even though the
cover is installed correctly, it does not
completely protect the cable from water entry. Therefore, use care not to
pour water directly onto the cover or
cable when washing the vehicle. If the
cable or cover becomes dirty, wipe
clean with a moist cloth.
The operation of the brake and shift
pedals should be checked before each
ride, and the pedal pivots should be lubricated if necessary.
Recommended lubricant:
Yamaha cable lubricant or other
suitable cable lubricant
6-25
Brake pedal
Shift pedal
U1WSE0E0.book Page 26 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23144
Recommended lubricant:
Lithium-soap-based grease
Checking and lubricating the
brake and clutch levers
The operation of the brake and clutch
levers should be checked before each
ride, and the lever pivots should be lubricated if necessary.
Recommended lubricants:
Brake lever:
Silicone grease
Clutch lever:
Lithium-soap-based grease
Brake lever
6
Clutch lever
6-26
U1WSE0E0.book Page 27 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23203
6
EAU23252
EAUM1653
Checking and lubricating the
sidestand
Lubricating the rear suspension
Lubricating the swingarm pivots
The operation of the sidestand should
be checked before each ride, and the
sidestand pivot and metal-to-metal
contact surfaces should be lubricated
if necessary.
The pivoting points of the rear suspension must be lubricated by a Yamaha
dealer at the intervals specified in the
periodic maintenance and lubrication
chart.
The swingarm pivots must be lubricated by a Yamaha dealer at the intervals
specified in the periodic maintenance
and lubrication chart.
EWA10732
WARNING
If the sidestand does not move up
and down smoothly, have a Yamaha
dealer check or repair it. Otherwise,
the sidestand could contact the
ground and distract the operator, resulting in a possible loss of control.
Recommended lubricant:
Lithium-soap-based grease
Recommended lubricant:
Lithium-soap-based grease
6-27
Recommended lubricant:
Lithium-soap-based grease
U1WSE0E0.book Page 28 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23273
EAU23284
Checking the front fork
Checking the steering
The condition and operation of the
front fork must be checked as follows
at the intervals specified in the periodic
maintenance and lubrication chart.
Worn or loose steering bearings may
cause danger. Therefore, the operation
of the steering must be checked as follows at the intervals specified in the
periodic maintenance and lubrication
chart.
1. Place a stand under the engine to
raise the front wheel off the
ground. (See page 6-36 for more
information.)
WARNING!
To
avoid injury, securely support
the vehicle so there is no danger
of it falling over. [EWA10752]
2. Hold the lower ends of the front
fork legs and try to move them forward and backward. If any free
play can be felt, have a Yamaha
dealer check or repair the steering.
To check the condition
Check the inner tubes for scratches,
damage and excessive oil leakage.
ECA10591
To check the operation
1. Place the vehicle on a level surface and hold it in an upright position. WARNING! To avoid injury,
securely support the vehicle so
there is no danger of it falling
over. [EWA10752]
2. While applying the front brake,
push down hard on the handlebars several times to check if the
front fork compresses and rebounds smoothly.
NOTICE
If any damage is found or the front
fork does not operate smoothly,
have a Yamaha dealer check or repair it.
6-28
6
U1WSE0E0.book Page 29 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU23292
Checking the wheel bearings
EAU50211
Battery
1
2
3
6
The front and rear wheel bearings must
be checked at the intervals specified in
the periodic maintenance and lubrication chart. If there is play in the wheel
hub or if the wheel does not turn
smoothly, have a Yamaha dealer
check the wheel bearings.
1. Battery
2. Negative battery lead (black)
3. Positive battery lead (red)
The battery is located under the rider
seat. (See page 3-19.)
This model is equipped with a VRLA
(Valve Regulated Lead Acid) battery.
There is no need to check the electrolyte or to add distilled water. However,
the battery lead connections need to
be checked and, if necessary, tightened.
EWA10761
WARNING
 Electrolyte is poisonous and
dangerous since it contains sulfuric acid, which causes severe
6-29
U1WSE0E0.book Page 30 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
burns. Avoid any contact with
skin, eyes or clothing and always shield your eyes when
working near batteries. In case
of contact, administer the following FIRST AID.
• EXTERNAL: Flush with plenty
of water.
• INTERNAL: Drink large quantities of water or milk and immediately call a physician.
• EYES: Flush with water for 15
minutes and seek prompt
medical attention.
 Batteries produce explosive hydrogen gas. Therefore, keep
sparks, flames, cigarettes, etc.,
away from the battery and provide sufficient ventilation when
charging it in an enclosed
space.
 KEEP THIS AND ALL BATTERIES OUT OF THE REACH OF
CHILDREN.
To charge the battery
Have a Yamaha dealer charge the battery as soon as possible if it seems to
have discharged. Keep in mind that the
battery tends to discharge more quickly if the vehicle is equipped with optional electrical accessories.
ECA16522
NOTICE
To charge a VRLA (Valve Regulated
Lead Acid) battery, a special (constant-voltage) battery charger is required. Using a conventional battery
charger will damage the battery.
To store the battery
1. If the vehicle will not be used for
more than one month, remove the
battery, fully charge it, and then
place it in a cool, dry place.
NOTICE: When removing the
battery, be sure the key is
turned to “OFF”, then disconnect the negative lead before
disconnecting the positive lead.
[ECA16303]
2. If the battery will be stored for
more than two months, check it at
least once a month and fully
charge it if necessary.
3. Fully charge the battery before installation. NOTICE: When installing the battery, be sure the key
6-30
is turned to “OFF”, then connect
the positive lead before connecting the negative lead. [ECA16841]
4. After installation, make sure that
the battery leads are properly connected to the battery terminals.
ECA16531
NOTICE
Always keep the battery charged.
Storing a discharged battery can
cause permanent battery damage.
6
U1WSE0E0.book Page 31 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU59870
Replacing the fuses
The main fuse and the fuse boxes,
which contain the fuses for the individual circuits, are located under the rider
seat. (See page 3-19.)
MT07
3
1
1.
2.
3.
4.
4
6
1 2 3 4 5
9
6.
7.
8.
9.
7 8
9 10
11
12
9
1.
2.
3.
4.
5.
6
7 8
6
1 2 3 4 5
TIP
To access the main fuse, remove the
starter relay cover as shown.
2
MT07A
12
Ignition fuse
Signaling system fuse
Headlight fuse
Fuel injection system fuse
Backup fuse (for clock and immobilizer system)
Radiator fan fuse
Parking lighting fuse
Auxiliary fuse
Spare fuse
Starter relay cover
Fuse box
Spare main fuse
Main fuse
1.
2.
3.
4.
5.
Ignition fuse
Signaling system fuse
Headlight fuse
Fuel injection system fuse
Backup fuse (for clock and immobilizer system)
6. Radiator fan fuse
7. ABS solenoid fuse
8. ABS motor fuse
9. Parking lighting fuse
10.Auxiliary fuse
11.ABS control unit fuse
12.Spare fuse
If a fuse is blown, replace it as follows.
1. Turn the key to “OFF” and turn off
the electrical circuit in question.
2. Remove the blown fuse, and then
install a new fuse of the specified
amperage. WARNING! Do not
6-31
U1WSE0E0.book Page 32 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
use a fuse of a higher amperage
rating than recommended to
avoid causing extensive damage to the electrical system and
possibly a fire. [EWA15132]
3. Turn the key to “ON” and turn on
the electrical circuit in question to
check if the device operates.
4. If the fuse immediately blows
again, have a Yamaha dealer
check the electrical system.
Specified fuses:
Main fuse:
30.0 A
Auxiliary fuse:
2.0 A
Headlight fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Parking lighting fuse:
7.5 A
Radiator fan fuse:
10.0 A
ABS motor fuse:
MT07A 30.0 A
ABS solenoid fuse:
MT07A 20.0 A
Fuel injection system fuse:
10.0 A
ABS control unit fuse:
MT07A 7.5 A
Backup fuse:
7.5 A
EAU59881
Replacing the headlight bulb
This model is equipped with a halogen
bulb headlight. If the headlight bulb
burns out, replace it as follows.
ECA10651
NOTICE
Take care not to damage the following parts:
 Headlight bulb
Do not touch the glass part of
the headlight bulb to keep it free
from oil, otherwise the transparency of the glass, the luminosity
of the bulb, and the bulb life will
be adversely affected. Thoroughly clean off any dirt and fingerprints on the headlight bulb
using a cloth moistened with alcohol or thinner.
 Headlight lens
Do not affix any type of tinted
film or stickers to the headlight
lens.
Do not use a headlight bulb of a
wattage higher than specified.
6-32
6
U1WSE0E0.book Page 33 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
1
2
1. Do not touch the glass part of the bulb.
6
1. Remove the headlight unit by removing the bolt and washer on
each side.
1. Bolt and washer
2. Disconnect the headlight coupler,
and then remove the headlight
bulb cover.
1
1
2
1. Bolt and washer
1. Headlight coupler
2. Headlight bulb cover
3. Unhook the headlight bulb holder,
then remove the burnt-out bulb.
6-33
1. Headlight bulb holder
2. Headlight bulb
4. Place a new headlight bulb into
position, then secure it with the
bulb holder.
5. Install the headlight bulb cover,
then connect the coupler.
6. Install the headlight unit as shown,
and then install the washer and
bolt on each side.
U1WSE0E0.book Page 34 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
7. Have a Yamaha dealer adjust the
headlight beam if necessary.
EAU24182
Tail/brake light
This model is equipped with an LEDtype tail/brake light.
If the tail/brake light does not come on,
have a Yamaha dealer check it.
EAU24205
Replacing a turn signal light
bulb
1. Remove the turn signal light lens
by removing the screw.
1
2
1. Turn signal light lens
2. Screw
2. Remove the burnt-out bulb by
pushing it in and turning it counterclockwise.
6-34
6
U1WSE0E0.book Page 35 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU59890
1
Replacing the license plate
light bulb
1
1. Remove the license plate light unit
by removing the nuts, washers
and collars, and then remove the
license plate light bulb socket (together with the bulb) by pulling it
out.
4
1. Turn signal light bulb
6
3. Insert a new bulb into the socket,
push it in, and then turn it clockwise until it stops.
4. Install the lens by installing the
screw. NOTICE: Do not overtighten the screw, otherwise the
lens may break. [ECA11192]
1. License plate light bulb
3
2
1
5
4
1.
2.
3.
4.
5.
3
2
License plate light unit
Collar
Washer
Nut
License plate light bulb socket
2. Remove the burnt-out bulb by
pulling it out.
6-35
3. Insert a new bulb into the socket.
4. Install the socket (together with
the bulb) by pushing it in, and then
install the license plate light unit by
installing the collars, washers and
nuts.
U1WSE0E0.book Page 36 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU46405
EAU24351
Replacing the auxiliary light
bulb
If the auxiliary light bulb burns out, replace it as follows.
1. Remove the headlight unit. (See
page 6-32.)
2. Remove the auxiliary light bulb
socket (together with the bulb) by
turning it counterclockwise.
1
Supporting the motorcycle
1
1. Auxiliary light bulb
4. Insert a new bulb into the socket.
5. Install the socket (together with
the bulb) by turning it clockwise.
6. Install the headlight unit.
1. Auxiliary light bulb socket
3. Remove the burnt-out bulb by
pulling it out of the socket.
Since this model is not equipped with a
centerstand, follow these precautions
when removing the front and rear
wheel or performing other maintenance requiring the motorcycle to
stand upright. Check that the motorcycle is in a stable and level position before starting any maintenance. A
strong wooden box can be placed under the engine for added stability.
To service the front wheel
1. Stabilize the rear of the motorcycle by using a motorcycle stand
or, if an additional motorcycle
stand is not available, by placing a
jack under the frame in front of the
rear wheel.
2. Raise the front wheel off the
ground by using a motorcycle
stand.
To service the rear wheel
Raise the rear wheel off the ground by
using a motorcycle stand or, if a motorcycle stand is not available, by placing
6-36
6
U1WSE0E0.book Page 37 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
a jack either under each side of the
frame in front of the rear wheel or under
each side of the swingarm.
EAU44792
Front wheel (for non-ABS
models)
EWA14841
3
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
2
1
EAU59931
To remove the front wheel
EWA10822
6
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the front wheel axle pinch
bolt, then the wheel axle and the
brake caliper bolts.
6-37
1. Front wheel axle pinch bolt
2. Wheel axle
3. Brake caliper bolt
2. Lift the front wheel off the ground
according to the procedure in the
previous section “Supporting the
motorcycle”.
3. Remove the brake hose holder on
the left side by removing the bolt.
U1WSE0E0.book Page 38 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
4
3
1.
2.
3.
4.
Brake hose holder
Bolt
Brake caliper
Brake caliper bolt
4. Remove the brake caliper on each
side by removing the bolts.
NOTICE: Do not apply the brake
after the brake calipers have
been removed, otherwise the
brake pads will be forced shut.
[ECA11052]
5. Pull the wheel axle out, and then
remove the wheel.
To install the front wheel
1. Lift the wheel up between the fork
legs.
2. Insert the wheel axle from the right
side.
3. Lower the front wheel so that it is
on the ground, and then put the
sidestand down.
4. Install the brake calipers by installing the bolts.
TIP
Make sure that there is enough space
between the brake pads before installing the brake calipers onto the brake
discs.
5. Install the brake hose holder by installing the bolt.
6. Tighten the brake caliper bolts and
the brake hose holder bolt to the
specified torques.
Tightening torques:
Brake caliper bolt:
40 Nm (4.0 m·kgf, 29 ft·lbf)
Brake hose holder bolt:
7 Nm (0.7 m·kgf, 5.1 ft·lbf)
7. Tighten the wheel axle, and then
the wheel axle pinch bolt to the
specified torques.
6-38
Tightening torques:
Wheel axle:
65 Nm (6.5 m·kgf, 47 ft·lbf)
Front wheel axle pinch bolt:
23 Nm (2.3 m·kgf, 17 ft·lbf)
8. Push down hard on the handlebar
several times to check for proper
fork operation.
6
U1WSE0E0.book Page 39 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU44802
Rear wheel (for non-ABS
models)
1
2
3
EWA14841
WARNING
For the ABS model, have a Yamaha
dealer remove and install the wheel.
4
EAU59940
To remove the rear wheel
EWA10822
6
WARNING
To avoid injury, securely support the
vehicle so there is no danger of it
falling over.
1. Loosen the locknut and drive
chain slack adjusting nut on each
side of the swingarm.
2. Loosen the axle nut.
1.
2.
3.
4.
Drive chain slack adjusting plate
Drive chain slack adjusting nut
Locknut
Axle nut
3. Lift the rear wheel off the ground
according to the procedure on
page 6-36.
4. Remove the axle nut and the drive
chain slack adjusting plate.
5. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.
6-39
TIP
 If the drive chain is difficult to remove, remove the wheel axle first,
and then lift the wheel upward
enough to remove the drive chain
from the rear sprocket.
 The drive chain does not need to
be disassembled in order to remove and install the rear wheel.
6. While supporting the brake caliper
and slightly lifting the wheel, pull
the wheel axle out and remove the
drive chain slack adjusting plate.
U1WSE0E0.book Page 40 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
1
2
3
1. Brake caliper
2. Drive chain slack adjusting plate
3. Wheel axle
TIP
 Make sure that the slot in the
brake caliper bracket is fit over the
retainer on the swingarm.
 Make sure that there is enough
space between the brake pads
before installing the wheel.
 Make sure that the arrow mark on
each chain puller is pointing upward.
TIP
A rubber mallet may be useful to tap
the wheel axle out.
7. Remove the wheel. NOTICE: Do
not apply the brake after the
wheel and brake disc have been
removed, otherwise the brake
pads will be forced shut. [ECA11073]
To install the rear wheel
1. Install the wheel, the brake caliper
bracket, and the drive chain slack
adjusting plate by inserting the
wheel axle from the right-hand
side.
1
2
3
1. Brake caliper bracket
2. Slot
3. Retainer
6-40
1
2
1. Drive chain puller
2. Arrow mark
2. Install the drive chain onto the rear
sprocket.
3. Install the drive chain slack adjusting plate and the axle nut.
4. Lower the rear wheel so that it is
on the ground, and then put the
sidestand down.
5. Adjust the drive chain slack. (See
page 6-22.)
6. Tighten the axle nut, and then
tighten the locknuts to the specified torques.
6
U1WSE0E0.book Page 41 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU25872
Tightening torques:
Axle nut:
105 Nm (10.5 m·kgf, 76 ft·lbf)
Locknut:
16 Nm (1.6 m·kgf, 12 ft·lbf)
6
Troubleshooting
Although Yamaha motorcycles receive
a thorough inspection before shipment
from the factory, trouble may occur
during operation. Any problem in the
fuel, compression, or ignition systems,
for example, can cause poor starting
and loss of power.
The following troubleshooting charts
represent quick and easy procedures
for checking these vital systems yourself. However, should your motorcycle
require any repair, take it to a Yamaha
dealer, whose skilled technicians have
the necessary tools, experience, and
know-how to service the motorcycle
properly.
Use only genuine Yamaha replacement parts. Imitation parts may look
like Yamaha parts, but they are often
inferior, have a shorter service life and
can lead to expensive repair bills.
EWA15142
WARNING
When checking the fuel system, do
not smoke, and make sure there are
no open flames or sparks in the area, including pilot lights from water
6-41
heaters or furnaces. Gasoline or
gasoline vapors can ignite or explode, causing severe injury or property damage.
U1WSE0E0.book Page 42 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
EAU42365
Troubleshooting charts
Starting problems or poor engine performance
1. Fuel
There is enough fuel.
Check the battery.
There is no fuel.
Supply fuel.
Check the fuel level in
the fuel tank.
2. Battery
The engine does not start.
Check the battery.
The engine turns over
quickly.
The battery is good.
The engine turns over
slowly.
Check the battery lead connections,
and have a Yamaha dealer charge
the battery if necessary.
Operate the electric starter.
3. Ignition
The engine does not start.
Check the ignition.
Wet
Wipe off with a dry cloth and correct the
spark plug gaps, or replace the spark plugs.
Operate the electric starter.
Dry
Have a Yamaha dealer check the vehicle.
The engine does not start.
Check the compression.
Remove the spark plugs
and check the electrodes.
4. Compression
There is compression.
The engine does not start.
Have a Yamaha dealer check the vehicle.
There is no compression.
Have a Yamaha dealer check the vehicle.
Operate the electric starter.
6-42
6
U1WSE0E0.book Page 43 Wednesday, November 13, 2013 10:28 AM
PERIODIC MAINTENANCE AND ADJUSTMENT
Engine overheating
EWA10401
WARNING
 Do not remove the radiator cap when the engine and radiator are hot. Scalding hot fluid and steam may be
blown out under pressure, which could cause serious injury. Be sure to wait until the engine has cooled.
 After removing the radiator cap retaining bolt, place a thick rag, like a towel, over the radiator cap, and then
slowly rotate the cap counterclockwise to the detent to allow any residual pressure to escape. When the hissing sound has stopped, press down on the cap while turning it counterclockwise, and then remove the cap.
The coolant level is low.
Check the cooling system
for leakage.
6
Wait until the
engine has cooled.
Check the coolant level in the
reservoir and radiator.
The coolant level
is OK.
There is
leakage.
There is
no leakage.
Have a Yamaha dealer check
and repair the cooling system.
Add coolant. (See TIP.)
Start the engine. If the engine overheats again, have a
Yamaha dealer check and repair the cooling system.
TIP
If coolant is not available, tap water can be temporarily used instead, provided that it is changed to the recommended coolant as soon as possible.
6-43
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
MOTORCYCLE CARE AND STORAGE
EAU37834
Matte color caution
EAU26015
Care
ECA15193
NOTICE
Some models are equipped with
matte colored finished parts. Be
sure to consult a Yamaha dealer for
advice on what products to use before cleaning the vehicle. Using a
brush, harsh chemical products or
cleaning compounds when cleaning
these parts will scratch or damage
their surface. Wax also should not
be applied to any matte colored finished parts.
While the open design of a motorcycle
reveals the attractiveness of the technology, it also makes it more vulnerable. Rust and corrosion can develop
even if high-quality components are
used. A rusty exhaust pipe may go unnoticed on a car, however, it detracts
from the overall appearance of a motorcycle. Frequent and proper care
does not only comply with the terms of
the warranty, but it will also keep your
motorcycle looking good, extend its
life and optimize its performance.
Before cleaning
1. Cover the muffler outlet with a
plastic bag after the engine has
cooled down.
2. Make sure that all caps and covers as well as all electrical couplers and connectors, including
the spark plug caps, are tightly installed.
3. Remove extremely stubborn dirt,
like oil burnt onto the crankcase,
with a degreasing agent and a
brush, but never apply such prod7-1
ucts onto seals, gaskets, sprockets, the drive chain and wheel
axles. Always rinse the dirt and
degreaser off with water.
Cleaning
ECA10773
NOTICE
 Avoid using strong acidic wheel
cleaners, especially on spoked
wheels. If such products are
used on hard-to-remove dirt, do
not leave the cleaner on the affected area any longer than instructed. Also, thoroughly rinse
the area off with water, immediately dry it, and then apply a corrosion protection spray.
 Improper cleaning can damage
plastic parts (such as cowlings,
panels, windshields, headlight
lenses, meter lenses, etc.) and
the mufflers. Use only a soft,
clean cloth or sponge with water to clean plastic. However, if
the plastic parts cannot be thoroughly cleaned with water, diluted mild detergent with water
may be used. Be sure to rinse
7
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
MOTORCYCLE CARE AND STORAGE
7
off any detergent residue using
plenty of water, as it is harmful
to plastic parts.
 Do not use any harsh chemical
products on plastic parts. Be
sure to avoid using cloths or
sponges which have been in
contact with strong or abrasive
cleaning products, solvent or
thinner, fuel (gasoline), rust removers or inhibitors, brake fluid,
antifreeze or electrolyte.
 Do not use high-pressure washers or steam-jet cleaners since
they cause water seepage and
deterioration in the following areas: seals (of wheel and swingarm bearings, fork and brakes),
electric components (couplers,
connectors,
instruments,
switches and lights), breather
hoses and vents.
 For motorcycles equipped with
a windshield: Do not use strong
cleaners or hard sponges as
they will cause dulling or
scratching. Some cleaning
compounds for plastic may
leave scratches on the wind-
shield. Test the product on a
small hidden part of the windshield to make sure that it does
not leave any marks. If the windshield is scratched, use a quality
plastic polishing compound after washing.
After normal use
Remove dirt with warm water, a mild
detergent, and a soft, clean sponge,
and then rinse thoroughly with clean
water. Use a toothbrush or bottlebrush
for hard-to-reach areas. Stubborn dirt
and insects will come off more easily if
the area is covered with a wet cloth for
a few minutes before cleaning.
After riding in the rain, near the sea or
on salt-sprayed roads
Since sea salt or salt sprayed on roads
during winter are extremely corrosive
in combination with water, carry out
the following steps after each ride in
the rain, near the sea or on saltsprayed roads.
7-2
TIP
Salt sprayed on roads in the winter
may remain well into spring.
1. Clean the motorcycle with cold
water and a mild detergent, after
the engine has cooled down.
NOTICE: Do not use warm water since it increases the corrosive action of the salt. [ECA10792]
2. Apply a corrosion protection spray
on all metal, including chromeand nickel-plated, surfaces to prevent corrosion.
After cleaning
1. Dry the motorcycle with a chamois
or an absorbing cloth.
2. Immediately dry the drive chain
and lubricate it to prevent it from
rusting.
3. Use a chrome polish to shine
chrome, aluminum and stainlesssteel parts, including the exhaust
system. (Even the thermally induced discoloring of stainlesssteel exhaust systems can be removed through polishing.)
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
MOTORCYCLE CARE AND STORAGE
4. To prevent corrosion, it is recommended to apply a corrosion protection spray on all metal,
including chrome- and nickel-plated, surfaces.
5. Use spray oil as a universal cleaner to remove any remaining dirt.
6. Touch up minor paint damage
caused by stones, etc.
7. Wax all painted surfaces.
8. Let the motorcycle dry completely
before storing or covering it.
ECA10801
 Apply spray oil and wax sparingly and make sure to wipe off
any excess.
 Never apply oil or wax to any
rubber and plastic parts, but
treat them with a suitable care
product.
 Avoid using abrasive polishing
compounds as they will wear
away the paint.
EWA11132
WARNING
Contaminants on the brakes or tires
can cause loss of control.
 Make sure that there is no oil or
wax on the brakes or tires.
 If necessary, clean the brake
discs and brake linings with a
regular brake disc cleaner or
acetone, and wash the tires with
warm water and a mild detergent. Before riding at higher
speeds, test the motorcycle’s
braking performance and cornering behavior.
EAU26183
Storage
NOTICE
TIP
 Consult a Yamaha dealer for advice on what products to use.
 Washing, rainy weather or humid
climates can cause the headlight
lens to fog. Turning the headlight
on for a short period of time will
help remove the moisture from the
lens.
Short-term
Always store your motorcycle in a cool,
dry place and, if necessary, protect it
against dust with a porous cover. Be
sure the engine and the exhaust system are cool before covering the motorcycle.
ECA10811
NOTICE
 Storing the motorcycle in a
poorly ventilated room or covering it with a tarp, while it is still
wet, will allow water and humidity to seep in and cause rust.
 To prevent corrosion, avoid
damp cellars, stables (because
of the presence of ammonia)
and areas where strong chemicals are stored.
Long-term
Before storing your motorcycle for several months:
1. Follow all the instructions in the
“Care” section of this chapter.
7-3
7
U1WSE0E0.book Page 4 Wednesday, November 13, 2013 10:28 AM
MOTORCYCLE CARE AND STORAGE
7
2. Fill up the fuel tank and add fuel
stabilizer (if available) to prevent
the fuel tank from rusting and the
fuel from deteriorating.
3. Perform the following steps to
protect the cylinders, piston rings,
etc. from corrosion.
a. Remove the spark plug caps
and spark plugs.
b. Pour a teaspoonful of engine
oil into each spark plug bore.
c. Install the spark plug caps onto
the spark plugs, and then
place the spark plugs on the
cylinder head so that the electrodes are grounded. (This will
limit sparking during the next
step.)
d. Turn the engine over several
times with the starter. (This will
coat the cylinder walls with oil.)
WARNING! To prevent damage or injury from sparking,
make sure to ground the
spark plug electrodes while
turning the engine over.
[EWA10952]
4.
5.
6.
7.
e. Remove the spark plug caps
from the spark plugs, and then
install the spark plugs and the
spark plug caps.
Lubricate all control cables and
the pivoting points of all levers and
pedals as well as of the sidestand/centerstand.
Check and, if necessary, correct
the tire air pressure, and then lift
the motorcycle so that both of its
wheels are off the ground. Alternatively, turn the wheels a little every
month in order to prevent the tires
from becoming degraded in one
spot.
Cover the muffler outlet with a
plastic bag to prevent moisture
from entering it.
Remove the battery and fully
charge it. Store it in a cool, dry
place and charge it once a month.
Do not store the battery in an excessively cold or warm place [less
than 0 °C (30 °F) or more than 30
°C (90 °F)]. For more information
on storing the battery, see page
6-29.
7-4
TIP
Make any necessary repairs before
storing the motorcycle.
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
SPECIFICATIONS
Dimensions:
Overall length:
2085 mm (82.1 in)
Overall width:
745 mm (29.3 in)
Overall height:
1090 mm (42.9 in)
Seat height:
805 mm (31.7 in)
Wheelbase:
1400 mm (55.1 in)
Ground clearance:
140 mm (5.51 in)
Minimum turning radius:
2694 mm (106.1 in)
Engine oil:
Fuel:
Recommended brand:
YAMALUBE
Type:
SAE 10W-30, 10W-40, 10W-50, 15W-40,
20W-40 or 20W-50
0
10 30 50 70 90 110 130 ˚F
SAE 10W-30
SAE 10W-40
SAE 10W-50
SAE 15W-40
SAE 20W-40
SAE 20W-50
Weight:
Curb weight:
MT07 179 kg (395 lb)
MT07A 182 kg (401 lb)
Engine:
Engine type:
Liquid cooled 4-stroke, DOHC
Cylinder arrangement:
Inline 2-cylinder
Displacement:
689 cm³
Bore × stroke:
80.0 × 68.6 mm (3.15 × 2.70 in)
Compression ratio:
11.50 : 1
Starting system:
Electric starter
Lubrication system:
Wet sump
–20 –10 0
10 20 30 40 50 ˚C
Recommended engine oil grade:
API service SG type or higher, JASO
standard MA
Engine oil quantity:
Without oil filter cartridge replacement:
2.30 L (2.43 US qt, 2.02 Imp.qt)
With oil filter cartridge replacement:
2.60 L (2.75 US qt, 2.29 Imp.qt)
Cooling system:
Coolant reservoir capacity (up to the
maximum level mark):
0.25 L (0.26 US qt, 0.22 Imp.qt)
Radiator capacity (including all routes):
1.60 L (1.69 US qt, 1.41 Imp.qt)
Air filter:
Air filter element:
Oil-coated paper element
8-1
Recommended fuel:
Premium unleaded gasoline (Gasohol (E10)
acceptable)
Fuel tank capacity:
14 L (3.70 US gal, 3.08 Imp.gal)
Fuel reserve amount:
2.7 L (0.71 US gal, 0.59 Imp.gal)
Fuel injection:
Throttle body:
ID mark:
MT07 1WS1 00
MT07 (35 kW) 1WS2 20
MT07A 1WS1 00
MT07A (35 kW) 1WS2 20
Spark plug(s):
Manufacturer/model:
NGK/LMAR8A-9
Spark plug gap:
0.8–0.9 mm (0.031–0.035 in)
Clutch:
Clutch type:
Wet, multiple-disc
Transmission:
Primary reduction ratio:
1.925 (77/40)
Final drive:
Chain
Secondary reduction ratio:
2.688 (43/16)
Transmission type:
Constant mesh 6-speed
Operation:
Left foot operation
8
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
SPECIFICATIONS
Gear ratio:
1st:
2.846 (37/13)
2nd:
2.125 (34/16)
3rd:
1.632 (31/19)
4th:
1.300 (26/20)
5th:
1.091 (24/22)
6th:
0.964 (27/28)
Chassis:
Frame type:
Diamond
Caster angle:
24.80 °
Trail:
90 mm (3.5 in)
8
Front tire:
Type:
Tubeless
Size:
120/70 ZR17M/C (58W)
Manufacturer/model:
MICHELIN/PILOT ROAD 3
Manufacturer/model:
BRIDGESTONE/BT023F F
Rear tire:
Type:
Tubeless
Size:
180/55 ZR17M/C (73W)
Manufacturer/model:
MICHELIN/PILOT ROAD 3A
Manufacturer/model:
BRIDGESTONE/BT023R M
Loading:
Maximum load:
MT07 176 kg (388 lb)
MT07A 173 kg (381 lb)
(Total weight of rider, passenger, cargo
and accessories)
Tire air pressure (measured on cold
tires):
Loading condition:
MT07 0–176 kg (0–388 lb)
MT07A 0–173 kg (0–381 lb)
Front:
225 kPa (2.25 kgf/cm², 33 psi)
Rear:
250 kPa (2.50 kgf/cm², 36 psi)
High-speed riding:
Front:
225 kPa (2.25 kgf/cm², 33 psi)
Rear:
250 kPa (2.50 kgf/cm², 36 psi)
Front wheel:
Wheel type:
Cast wheel
Rim size:
17M/C x MT3.50
Rear wheel:
Wheel type:
Cast wheel
Rim size:
17M/C x MT5.50
8-2
Front brake:
Type:
Dual disc brake
Operation:
Right hand operation
Specified brake fluid:
DOT 4
Rear brake:
Type:
Single disc brake
Operation:
Right foot operation
Specified brake fluid:
DOT 4
Front suspension:
Type:
Telescopic fork
Spring/shock absorber type:
Coil spring/oil damper
Wheel travel:
130 mm (5.1 in)
Rear suspension:
Type:
Swingarm (link suspension)
Spring/shock absorber type:
Coil spring/gas-oil damper
Wheel travel:
130 mm (5.1 in)
Electrical system:
Ignition system:
TCI
Charging system:
AC magneto
U1WSE0E0.book Page 3 Wednesday, November 13, 2013 10:28 AM
SPECIFICATIONS
Battery:
Model:
YTZ10S
Voltage, capacity:
12 V, 8.6 Ah
Headlight:
Bulb type:
Halogen bulb
Bulb voltage, wattage × quantity:
Headlight:
12 V, 60.0 W/55.0 W × 1
Tail/brake light:
LED
Front turn signal light:
12 V, 10.0 W × 2
Rear turn signal light:
12 V, 10.0 W × 2
Auxiliary light:
12 V, 5.0 W × 1
License plate light:
12 V, 5.0 W × 1
Meter lighting:
LED
Neutral indicator light:
LED
High beam indicator light:
LED
Oil pressure warning light:
LED
Turn signal indicator light:
LED
Coolant temperature warning light:
LED
Engine trouble warning light:
LED
ABS warning light:
MT07A LED
Immobilizer system indicator light:
LED
Fuses:
Main fuse:
30.0 A
Auxiliary fuse:
2.0 A
Headlight fuse:
15.0 A
Signaling system fuse:
10.0 A
Ignition fuse:
10.0 A
Parking lighting fuse:
7.5 A
Radiator fan fuse:
10.0 A
Fuel injection system fuse:
10.0 A
ABS control unit fuse:
MT07A 7.5 A
ABS motor fuse:
MT07A 30.0 A
ABS solenoid fuse:
MT07A 20.0 A
Backup fuse:
7.5 A
8-3
8
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
CONSUMER INFORMATION
EAU53562
Identification numbers
EAU26401
Vehicle identification number
Record the vehicle identification number, engine serial number, and the
model label information in the spaces
provided below. These identification
numbers are needed when registering
the vehicle with the authorities in your
area and when ordering spare parts
from a Yamaha dealer.
VEHICLE IDENTIFICATION NUMBER:
ENGINE SERIAL NUMBER:
9
MODEL LABEL INFORMATION:
EAU26441
Engine serial number
1
1
1. Vehicle identification number
1. Engine serial number
The vehicle identification number is
stamped into the steering head pipe.
Record this number in the space provided.
The engine serial number is stamped
into the crankcase.
EAU26521
Model label
TIP
The vehicle identification number is
used to identify your motorcycle and
may be used to register your motorcycle with the licensing authority in your
area.
1
1. Model label
9-1
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
CONSUMER INFORMATION
The model label is affixed to the frame
under the passenger seat. (See page
3-19.) Record the information on this
label in the space provided. This information will be needed when ordering
spare parts from a Yamaha dealer.
9
9-2
U1WSE0E0.book Page 1 Wednesday, November 13, 2013 10:28 AM
INDEX
A
ABS (for ABS models)...........................3-15
ABS warning light (for ABS models) .......3-5
Air filter element and check hose,
replacing and cleaning .......................6-14
Auxiliary DC connector .........................3-27
Auxiliary light bulb, replacing................6-36
Engine serial number.............................. 9-1
Engine trouble warning light................... 3-4
F
H
Handlebar switches.............................. 3-13
Hazard switch....................................... 3-13
Headlight bulb, replacing ..................... 6-32
Helmet holding cable ........................... 3-21
High beam indicator light ....................... 3-4
Horn switch .......................................... 3-13
10
D
Dimmer switch ......................................3-13
Drive chain, cleaning and lubricating....6-24
Drive chain slack...................................6-22
E
Engine break-in.......................................5-3
Engine oil and oil filter cartridge .............6-9
O
Oil pressure warning light .......................3-4
P
Parking ....................................................5-4
Part locations ..........................................2-1
Pass switch ...........................................3-13
R
Rear suspension, lubricating ................6-27
S
Safety information...................................1-1
Seats .....................................................3-19
Shifting ....................................................5-2
Shift pedal.............................................3-14
Shock absorber assembly, adjusting....3-23
Sidestand ..............................................3-24
Sidestand, checking and lubricating.....6-27
Spark plugs, checking ............................6-8
Specifications .........................................8-1
Start/Engine stop switch.......................3-13
Starting the engine..................................5-1
Steering, checking ................................6-28
Storage ...................................................7-3
Storage compartment ...........................3-22
Supporting the motorcycle ...................6-36
Swingarm pivots, lubricating ................6-27
I
C
Cables, checking and lubricating .........6-25
Care ........................................................7-1
Catalytic converter................................3-19
Clutch lever...........................................3-14
Clutch lever free play, adjusting ...........6-18
Coolant .................................................6-11
Coolant temperature warning light .........3-4
Neutral indicator light..............................3-4
Front and rear brake pads, checking ... 6-20
Front fork, checking ............................. 6-28
Fuel....................................................... 3-17
Fuel consumption, tips for reducing ...... 5-3
Fuel tank breather hose and overflow
hose ................................................... 3-18
Fuel tank cap........................................ 3-16
Fuses, replacing ................................... 6-31
B
Battery ..................................................6-29
Brake and clutch levers,
checking and lubricating ....................6-26
Brake and shift pedals,
checking and lubricating ....................6-25
Brake fluid, changing ............................6-22
Brake fluid level, checking ....................6-21
Brake lever ............................................3-14
Brake lever free play, checking.............6-19
Brake light switches..............................6-19
Brake pedal...........................................3-15
Multi-function meter unit.........................3-6
N
Identification numbers............................ 9-1
Ignition circuit cut-off system............... 3-25
Immobilizer system ................................ 3-1
Immobilizer system indicator light.......... 3-5
Indicator lights and warning lights ......... 3-3
L
License plate light bulb, replacing........ 6-35
Luggage strap holders ......................... 3-24
M
Main switch/steering lock....................... 3-2
Maintenance and lubrication, periodic ... 6-4
Maintenance, emission control
system.................................................. 6-3
Matte color, caution ............................... 7-1
Model label............................................. 9-1
10-1
T
Tail/brake light ......................................6-34
Throttle grip and cable,
checking and lubricating ....................6-25
Throttle grip free play, checking ...........6-15
Tires ......................................................6-15
U1WSE0E0.book Page 2 Wednesday, November 13, 2013 10:28 AM
INDEX
Tool kit.................................................... 6-2
Troubleshooting.................................... 6-41
Troubleshooting charts......................... 6-42
Turn signal indicator lights ..................... 3-3
Turn signal light bulb, replacing ........... 6-34
Turn signal switch................................. 3-13
V
Valve clearance .................................... 6-15
Vehicle identification number ................. 9-1
W
Wheel bearings, checking .................... 6-29
Wheel, front (for non-ABS models)....... 6-37
Wheel, rear (for non-ABS models)........ 6-39
Wheels.................................................. 6-18
10
10-2
A5-yoko_Blank.fm Page 1 Thursday, December 8, 2011 2:18 PM
A5-yoko_Blank.fm Page 1 Thursday, December 8, 2011 2:18 PM
Original instructions
PRINTED ON RECYCLED PAPER
PRINTED IN JAPAN
2013.11-1.1×1 CR
(E)
DIC183
Was this manual useful for you? yes no
Thank you for your participation!

* Your assessment is very important for improving the work of artificial intelligence, which forms the content of this project

Download PDF

advertising